It is essencial to safeguard the value and current recognition of the CE marking by implementing the CPR in a way that the identification of construction products are characterized by the declared performance based on a harmonized technical assessment being the result of national consent.
London build 2015 06 eota - eta tool for non-standardised products-pdsPeter Schellinck
For any area that needs improvement, the first step is to replace commodity-based standards with performance-based standards.
“Performance" here always relates to "total building performance," so that, even though you can talk about the performance of a component part or sub-system, it must be measured in relation to the performance of the total building system.
EU Sustainable Energy Week - How to support innovation to enter the marketPeter Schellinck
The increasing complexity of the construction industry is driving the evolution of the industrial management mindset toward a new post-industrial, or performance paradigm. More and more it is becoming critical for the construction industry to assess and align its core competitive capabilities with its contextual environment.
We are the first and only adviser for CE mark in the Arab region .
we operate from Stockholm to serve you faster .
just contact us
executive@qualitasintl.co.uk
نحن الخبراء العرب الوحيدون في العالم العربي لتمكينكم من التصدير الى اوربا الحصول على علامة سلامة استخدام منتجاتكم وفق الكودات الاوربية
CE MARK
just contact us
executive@qualitasintl.co.uk
CE marking is a self-declaration where a manufacturer proves compliance with EU health, safety and environmental protection legislation and confirms a product’s compliance with relevant requirements.
London build 2015 06 eota - eta tool for non-standardised products-pdsPeter Schellinck
For any area that needs improvement, the first step is to replace commodity-based standards with performance-based standards.
“Performance" here always relates to "total building performance," so that, even though you can talk about the performance of a component part or sub-system, it must be measured in relation to the performance of the total building system.
EU Sustainable Energy Week - How to support innovation to enter the marketPeter Schellinck
The increasing complexity of the construction industry is driving the evolution of the industrial management mindset toward a new post-industrial, or performance paradigm. More and more it is becoming critical for the construction industry to assess and align its core competitive capabilities with its contextual environment.
We are the first and only adviser for CE mark in the Arab region .
we operate from Stockholm to serve you faster .
just contact us
executive@qualitasintl.co.uk
نحن الخبراء العرب الوحيدون في العالم العربي لتمكينكم من التصدير الى اوربا الحصول على علامة سلامة استخدام منتجاتكم وفق الكودات الاوربية
CE MARK
just contact us
executive@qualitasintl.co.uk
CE marking is a self-declaration where a manufacturer proves compliance with EU health, safety and environmental protection legislation and confirms a product’s compliance with relevant requirements.
Our way of “Mentoring” desires to affect higher rates of stability and satisfaction in a changing business landscape that calls the mentee into new collaborative relationships and new systems of delivery.
Mentoring is an effort to integrate the formation dimensions of Spiritual development, Business development, Intellectual development, and Human development as the mentee moves into a new phase of his/her life.
Victor Alvarez and Alejandro Fransoy present "ESSP support to LPV implementation" during the webinar for "Second EGNOS adoption aviation call for grants".
WSB14 - Session 111-1 CEN presentation: overview Rules and Regulations and EN...Chris Hamans
Presentation in session 111 during the World Sustainable Building Conference 2014 in Barcelona (28-30th .Oct. 2014)
The theme of the WSB14 was: "Sustainability. Are we moving as quickly as we should? It is up to us!"
Session 111 (out of 144 sessions) had to answer the question: "Are we moving in the same direction?"
This presentation by CEN-CENELEC standardisation gave an overview of EU's rules, regulations and policies and the role of EN standards with regard to this.
This presentation was one out of the 5 from this session 111. After a questioning, answering and discussion with the audience the session concluded: "No, we are not moving in the same direction!"
see WSB14-Sessions 111-0 to 111-4
Assent Compliance www.assentcompliance.com provides free informational webinars for the latest in REACH, RoHS, Conflict Mineral and other restricted substances.
Assent Compliance with offices in Canada, US and EU provides consulting services and compliance software to businesses that must comply with local, national or global environmental regulations. Visit Assent Compliance for more information.
The 2021 Interactive Cargo Webinar presents the progress of the IATA Interactive Cargo project. More details at www.iata.org/interactive-cargo.
14:00-14:30 The IATA Interactive Cargo project achievements and next steps
This presentation will give an overview of the Interactive Cargo project’s achievements: (1) The recommended practice on IoT device data sharing in air cargo, (2) The recommended practice on the approval of the use of portable electronic devices onboard aircraft for air cargo, and (3) the amendment to the conditions of carriage for cargo.
Sonia Ben Hamida, Project Manager Interactive Cargo, IATA
Carlos Tornero, Deputy General Counsel, IATA
14:30-14:45 Safely and efficiently approving the use of cargo tracking devices
The presentation will share the progress of the pilot project “Approval of the use of Portable Electronic Devices (PEDs) approval for air cargo”. The goals of this pilot are to adopt the IATA recommended practice and checklists for the approval of Portable Electronic Devices (PEDs) onboard aircraft for air cargo in order to standardize information required for approval and decrease the total duration required for carriers to complete an approval request.
Jeff Clark, Founder & CEO, 7PSolutions, LLC
14:45-15:00 Sharing IoT device data in air cargo with ONE Record: Outcomes and lessons learnt
The presentation will share the progress of the pilot project “Visibility, Tracking and Alerts at the Piece Level”. The goals of this pilot are to demonstrate autonomous delivery of in-shipment status messaging and sensor-based alerts, mirror Cargo iQ milestones in cargo facilities, and track ULDs integrated with tracking devices.
Tomal Sohoral, Manager, Cargo Solutions Strategy and Business Development, Air Canada Cargo
15:00-15:15 The handling of interactive cargo: Main challenges and potential solutions
The use of smart tracking devices presents shippers and cargo owners with the ability to monitor not just the whereabouts of air cargo shipments but also their physical condition and their immediate environment. But these are sophisticated devices, often powered by lithium batteries with some models capable of interacting with local devices and transmitting data in-flight. Shippers respect and appreciate the need for clear rules for the use of these devices yet they sit in a hybrid regulatory environment - part-dangerous goods, part-perishable load, part-radio communications device and part-data logger able to interact with third party systems. So, there is a data privacy and protection issue too.
GSF has been supporting and encouraging the air cargo community in its development of processes and procedures for the handling and acceptance of these devices and this presentation will set out the shippers’ perspectives and expectations of procedures that will make the use of these devices as seamless and trouble-free as possible.
James Hookham, Secretary General, Global Shippers Forum
Webinar on Environmental Footprint Data requirements in PEFCRMarisa Vieira
This slides deck includes the materials used in the webinar we hosted on data requirements to be included in a PEFCR document for the Environmental Footprint pilot phase. We gave this webinar on behalf of the Environmental Footprint team from the European Commission.
Our way of “Mentoring” desires to affect higher rates of stability and satisfaction in a changing business landscape that calls the mentee into new collaborative relationships and new systems of delivery.
Mentoring is an effort to integrate the formation dimensions of Spiritual development, Business development, Intellectual development, and Human development as the mentee moves into a new phase of his/her life.
Victor Alvarez and Alejandro Fransoy present "ESSP support to LPV implementation" during the webinar for "Second EGNOS adoption aviation call for grants".
WSB14 - Session 111-1 CEN presentation: overview Rules and Regulations and EN...Chris Hamans
Presentation in session 111 during the World Sustainable Building Conference 2014 in Barcelona (28-30th .Oct. 2014)
The theme of the WSB14 was: "Sustainability. Are we moving as quickly as we should? It is up to us!"
Session 111 (out of 144 sessions) had to answer the question: "Are we moving in the same direction?"
This presentation by CEN-CENELEC standardisation gave an overview of EU's rules, regulations and policies and the role of EN standards with regard to this.
This presentation was one out of the 5 from this session 111. After a questioning, answering and discussion with the audience the session concluded: "No, we are not moving in the same direction!"
see WSB14-Sessions 111-0 to 111-4
Assent Compliance www.assentcompliance.com provides free informational webinars for the latest in REACH, RoHS, Conflict Mineral and other restricted substances.
Assent Compliance with offices in Canada, US and EU provides consulting services and compliance software to businesses that must comply with local, national or global environmental regulations. Visit Assent Compliance for more information.
The 2021 Interactive Cargo Webinar presents the progress of the IATA Interactive Cargo project. More details at www.iata.org/interactive-cargo.
14:00-14:30 The IATA Interactive Cargo project achievements and next steps
This presentation will give an overview of the Interactive Cargo project’s achievements: (1) The recommended practice on IoT device data sharing in air cargo, (2) The recommended practice on the approval of the use of portable electronic devices onboard aircraft for air cargo, and (3) the amendment to the conditions of carriage for cargo.
Sonia Ben Hamida, Project Manager Interactive Cargo, IATA
Carlos Tornero, Deputy General Counsel, IATA
14:30-14:45 Safely and efficiently approving the use of cargo tracking devices
The presentation will share the progress of the pilot project “Approval of the use of Portable Electronic Devices (PEDs) approval for air cargo”. The goals of this pilot are to adopt the IATA recommended practice and checklists for the approval of Portable Electronic Devices (PEDs) onboard aircraft for air cargo in order to standardize information required for approval and decrease the total duration required for carriers to complete an approval request.
Jeff Clark, Founder & CEO, 7PSolutions, LLC
14:45-15:00 Sharing IoT device data in air cargo with ONE Record: Outcomes and lessons learnt
The presentation will share the progress of the pilot project “Visibility, Tracking and Alerts at the Piece Level”. The goals of this pilot are to demonstrate autonomous delivery of in-shipment status messaging and sensor-based alerts, mirror Cargo iQ milestones in cargo facilities, and track ULDs integrated with tracking devices.
Tomal Sohoral, Manager, Cargo Solutions Strategy and Business Development, Air Canada Cargo
15:00-15:15 The handling of interactive cargo: Main challenges and potential solutions
The use of smart tracking devices presents shippers and cargo owners with the ability to monitor not just the whereabouts of air cargo shipments but also their physical condition and their immediate environment. But these are sophisticated devices, often powered by lithium batteries with some models capable of interacting with local devices and transmitting data in-flight. Shippers respect and appreciate the need for clear rules for the use of these devices yet they sit in a hybrid regulatory environment - part-dangerous goods, part-perishable load, part-radio communications device and part-data logger able to interact with third party systems. So, there is a data privacy and protection issue too.
GSF has been supporting and encouraging the air cargo community in its development of processes and procedures for the handling and acceptance of these devices and this presentation will set out the shippers’ perspectives and expectations of procedures that will make the use of these devices as seamless and trouble-free as possible.
James Hookham, Secretary General, Global Shippers Forum
Webinar on Environmental Footprint Data requirements in PEFCRMarisa Vieira
This slides deck includes the materials used in the webinar we hosted on data requirements to be included in a PEFCR document for the Environmental Footprint pilot phase. We gave this webinar on behalf of the Environmental Footprint team from the European Commission.
The CEN/ eInvoicing 2 Workshop presents the following draft CWAs for public review
- CWA2c-Monitoring_legal_requirements_for_cross_border_e-Invoicing.pdf
- CWA1 Adoption programme for increased eInvoicing in European business processes
- CWA2a e-Invoicing Compliance Guidelines Commentary
- CWA2b e-Invoicing Compliance Guidelines_v0.90-b
- CWA3 Assessing new business processes and technologies for eInvoicing
- CWA4 Emerging network infrastructure of eInvoice service providers throughout Europe
Comments have to be written down in the attached template and to be sent to the Secretary by 20 August 2009 at the latest.
More information on : http://www.cen.eu/cenorm/sectors/sectors/isss/activity/einvoicing_2.asp
Please forward this message to any interested party.
Comments can also be posted on ebusiness knowledge village
on Slideshare
http://www.slideshare.net/group/electronic-business-knowledge-village
on linkedin
http://www.linkedin.com/groups?gid=1106767
F.A.Q on CE Marking of Construction Products_CertiMaCCertiMaC
The most frequently asked questions about CE marking of construction products.
As Notified Body no. 2685 CPR (EU) 305/2011 for the issue of Certification and Classification Certificates, CertiMaC carries out all the tasks assigned to it by the third party assigned to it in the evaluation and verification of the constancy of the benefit and for which it has been notified by the Ministries responsible: measure , examines, verifies, calibrates or otherwise determines the characteristics or performance of materials or construction products in terms of quality and efficiency.
Donate to charity during this holiday seasonSERUDS INDIA
For people who have money and are philanthropic, there are infinite opportunities to gift a needy person or child a Merry Christmas. Even if you are living on a shoestring budget, you will be surprised at how much you can do.
Donate Us
https://serudsindia.org/how-to-donate-to-charity-during-this-holiday-season/
#charityforchildren, #donateforchildren, #donateclothesforchildren, #donatebooksforchildren, #donatetoysforchildren, #sponsorforchildren, #sponsorclothesforchildren, #sponsorbooksforchildren, #sponsortoysforchildren, #seruds, #kurnool
Working with data is a challenge for many organizations. Nonprofits in particular may need to collect and analyze sensitive, incomplete, and/or biased historical data about people. In this talk, Dr. Cori Faklaris of UNC Charlotte provides an overview of current AI capabilities and weaknesses to consider when integrating current AI technologies into the data workflow. The talk is organized around three takeaways: (1) For better or sometimes worse, AI provides you with “infinite interns.” (2) Give people permission & guardrails to learn what works with these “interns” and what doesn’t. (3) Create a roadmap for adding in more AI to assist nonprofit work, along with strategies for bias mitigation.
Jennifer Schaus and Associates hosts a complimentary webinar series on The FAR in 2024. Join the webinars on Wednesdays and Fridays at noon, eastern.
Recordings are on YouTube and the company website.
https://www.youtube.com/@jenniferschaus/videos
About Potato, The scientific name of the plant is Solanum tuberosum (L).Christina Parmionova
The potato is a starchy root vegetable native to the Americas that is consumed as a staple food in many parts of the world. Potatoes are tubers of the plant Solanum tuberosum, a perennial in the nightshade family Solanaceae. Wild potato species can be found from the southern United States to southern Chile
Synopsis (short abstract) In December 2023, the UN General Assembly proclaimed 30 May as the International Day of Potato.
Jennifer Schaus and Associates hosts a complimentary webinar series on The FAR in 2024. Join the webinars on Wednesdays and Fridays at noon, eastern.
Recordings are on YouTube and the company website.
https://www.youtube.com/@jenniferschaus/videos
Preliminary findings _OECD field visits to ten regions in the TSI EU mining r...OECDregions
Preliminary findings from OECD field visits for the project: Enhancing EU Mining Regional Ecosystems to Support the Green Transition and Secure Mineral Raw Materials Supply.
Monitoring Health for the SDGs - Global Health Statistics 2024 - WHOChristina Parmionova
The 2024 World Health Statistics edition reviews more than 50 health-related indicators from the Sustainable Development Goals and WHO’s Thirteenth General Programme of Work. It also highlights the findings from the Global health estimates 2021, notably the impact of the COVID-19 pandemic on life expectancy and healthy life expectancy.
RFP for Reno's Community Assistance CenterThis Is Reno
Property appraisals completed in May for downtown Reno’s Community Assistance and Triage Centers (CAC) reveal that repairing the buildings to bring them back into service would cost an estimated $10.1 million—nearly four times the amount previously reported by city staff.
7. Declara>on
of
Performance
CPR
BRCW
ID
Mandate
to
CEN
Request
for
ETA
hEN
EAD
ETA
Nota: ETAG Published before 1st July 2013 may be used as EAD
The European Assessment Document (EAD):
- developed and adopted by the organization of TABs: EOTA,
- support the assessment of product(s) and serve the issue of European
Technical Assessment (ETA).
CPR: Regulation (EU) No 305/2011 - BRCW: Basic Requirements for Construction Works - ID: Interpretative documents
CEN: Comité Européen de Normalisation - hEN: European harmonized Standard - EAD: European Assessment Document - ETA: European Technical Assessment – TAB: Technical
Assessment Body
7
ECTP
Conference
-‐
June,
18th
2014
8. ETA:
Documented
assessment
of
the
performance
of
a
product
• Granted
by
a
TAB
on
the
basis
of
a
European
Assessment
Document
(EAD)
on
a
manufacturer’s
request
Ø Defini>on
of
the
product
and
its
declared
intended
use(s)
Ø Performances,
expressed
in
level
or
class
or
by
mean
of
a
descrip>on,
of
the
essen>al
characteris>cs
agreed
between
the
manufacturer
and
the
TAB
(technical
assump>ons
required
to
reach
these
performances)
Ø Technical
details
for
the
implementa>on
of
the
system
of
assessment
and
verifica>on
of
the
constancy
of
performance
[
No
defined
limit
of
validity
]
8
ECTP
Conference
-‐
June,
18th
2014
9. Direc1ve
+
na1onal
transposi1on
Regula1on
ETA
=>
Fitness
for
use
All
the
relevant
characteris>cs
ETA
=>
Performance
of
the
essen>al
characteris>cs
agreed
for
the
intended
use
ETAG
or
CUAP
=>
all
the
relevant
characteris>cs
for
the
intended
use
EAD
=>
agreed
relevant
essen>al
characteris>cs
for
the
intended
use
(Art.
4.2:
Communica>on
of
declared
ess.
caract.
only)
Possible
objec>on
on
ETA
(art.5.1)
Possible
objec>on
on
EAD
but
not
on
ETA
CE
interven>on
on
the
content
of
an
EAD
(competence/responsibility)
ETA
=>
5years
validity
ETA
=>
no
defined
limit
of
validity
9
ECTP
Conference
-‐
June,
18th
2014
10. AVCP tasks
Regulation (EU) No 305/2011 (of 9 March 2011)
EAD (European Assessment Document)
Declaration
of performance
CE marking
Test report
Calcul. report
Simul. report
Experience
Claimsof
manufacturer
Instructions and safety information (article 11.6)
ET-Assessment
10
ECTP
Conference
-‐
June,
18th
2014
12. EOTA
Developments
12
ECTP
Conference
-‐
June,
18th
2014
EOTA Statutes
of 11 June 2013
EOTA
Internal Regulations
EOTA Model for
ETA Application
EOTA Recommendations for
Key elements of
Service Agreement
National rules
Technical requirements
EOTA GD 07 on
How to write an ETA
Regulation (EU) 1062/2013
on ETA format
EOTA GD 06 on
How to write an EAD
EOTA GD on
ETA process Step-by-step
EOTA GD 05 on
Work Programme
EOTA
Quality &
Consistency
of ETA
Regulation (EU) 305/2011
- CPR -
EOTA Layout model for ETA
EOTA GDs for
EAD Consultations and
Handling of ETA/EAD
Financial restraints
Delegated Acts
National rules
Administrative rules
EOTA
CMS*
*)
Consistency
Management
System
E
C
+
M
S
P
r
o
v
I
d
e
f
o
r
f
r
a
m
e
Organisation
Working in a Cloud -
Network environment
14. q Preliminary
exchange
phase
between
the
manufacturer
and
the
TAB:
• Preparing
the
request
• Answering
the
manufacturer’s
request
• Understanding
and
agreeing
on
the
request
q Contract
agreement
for
the
request
q Introduc>on
of
the
Technical
Dossier
for
the
ETA
q Preliminary
instruc>on
phase
and
Registra>on
of
the
Technical
Dossier
for
the
ETA
q Development
of
a
relevant
EAD,
where
necessary
q Assessing
the
product
and
Gran>ng
the
ETA
on
the
basis
of
the
EAD
14
ECTP
Conference
-‐
June,
18th
2014
15. ETA
based
on
exis1ng
EAD
• New
development
• Cita>on
and
informa>on
from
TABs
to
member
states
permieng
no>fica>on
ETA
needing
development
of
an
EAD
ETA
process
15
ECTP
Conference
-‐
June,
18th
2014
16. ETA
=
technical
specifica>on
suppor>ng
the
declara>on
of
performance
and
CE
marking
of
a
product
16
ECTP
Conference
-‐
June,
18th
2014
17. EOTA
Interna>onal
non
for
Profit
Organisa>on
(a.i.s.b.l)
Thank
you
for
your
ahen>on!
Peter
D.
Schellinck,
Secretary
General
Kunstlaan
40
Avenue
des
Arts,
1040
Brussels
Tel
0032
2
502
69
00
-‐
info@eota.eu
–
www.eota.eu
17
ECTP
Conference
-‐
June,
18th
2014