This document provides instructions and download links for Dassault Systemes CATIA V6 R2012x software with a crack by SSQ to remove licensing restrictions. It notes the system requirements including a 64-bit CPU, 8GB RAM, and Windows 64-bit to run the Enovia server software. Instructions are given to install the Enovia server, replace the license server with SSQ's cracked version, and then install the 32-bit or 64-bit CATIA client software depending on the computer system. Registration on the forum is required to access the direct download links.
This document discusses welding of aluminum and its alloys. It describes the key properties of aluminum including its light weight, corrosion resistance, and electrical conductivity. It outlines the different alloy designations and their major alloying elements. The document discusses strengthening mechanisms in aluminum alloys such as solid solution strengthening, precipitation hardening, and strain hardening. It also covers issues that can occur during welding of aluminum like solidification cracking, hot cracking, and softening in the heat-affected zone. Overall, the document provides a comprehensive overview of aluminum alloys and considerations for welding this important metal.
This document discusses various topics related to gear design including:
1. It describes the main types of gears - spur, helical, bevel, and worm gears.
2. It explains gear terminology like pitch circle, diametral pitch, pressure angle, and provides formulas for calculating gear parameters.
3. It discusses factors that influence gear strength like surface hardness, dynamic loads, mounting, and reliability. Standard equations are presented for calculating the allowable bending stress that considers these factors.
The document discusses various topics related to automotive sheet metal and body damage repair, including:
- The most common types of sheet metal and alloys used in automotive manufacturing.
- The different types of body damage such as simple bends, displaced areas, and rolled buckles.
- Techniques for classifying and analyzing direct, indirect, and work hardening types of damage.
- Properties of sheet metal like plasticity, work hardening, and elasticity that are important for repair.
- Methods for straightening damaged metal including using hammers, dollies, spoons, and air bladders.
Failure analysis in heavy duty truck framesAniket Gupta
The document discusses failure analysis of cracks in heavy duty truck frames. It describes an experimental procedure where cracks were found in a truck frame near the rear drive axle connection after endurance testing. Microscopic analysis found the cracks were caused by an aggressively drilled hole close to an existing bolt hole. Finite element simulations using FRANC3D crack growth tools correlated well with the physical crack path and cycles to failure. A sensitivity study determined that maintaining a certain distance between holes and high stress areas could prevent fatigue failures. The work provides a methodology for failure analysis of cracks in truck frames.
Dokumen tersebut membahas tentang inspeksi pengelasan, meliputi standar pengelasan, jenis proses pengelasan, posisi pengelasan, bahan konsumsi pengelasan, spesifikasi prosedur pengelasan, cacat-cacat las, dan uji non-destruktif dan visual inspeksi. Tujuan pelatihan ini adalah agar peserta memahami istilah-istilah dalam pengelasan serta cara melakukan inspeksi pengelasan.
This document lists and defines various welding defects such as porosity, incomplete penetration, slag inclusions, undercut, and cracks. It also discusses ASME Section V requirements for radiation energy density during welding to meet image quality standards. Slag inclusions are further defined as elongated or isolated, with size thresholds provided above which they are considered defects.
The document provides information about the Sanjary Educational Academy which offers certification courses in engineering disciplines like piping design, QA/QC, and safety. It describes a post graduate diploma course in process piping design and engineering over 40 days that will provide training and certification upon completion. The academy aims to train and certify engineers to international standards to work in industries like oil and gas.
This document provides terminology related to welding codes and qualifications. It defines key terms like essential variables, non-essential variables, and supplementary variables. It also discusses welding terminology like weld beads, types of joints, and weld positions. The document is part of a larger guide on welding qualification simplified according to the ASME IX Code and covers topics like steel welding metallurgy, welding processes, weld symbols, and acceptance criteria for welds.
This document discusses welding of aluminum and its alloys. It describes the key properties of aluminum including its light weight, corrosion resistance, and electrical conductivity. It outlines the different alloy designations and their major alloying elements. The document discusses strengthening mechanisms in aluminum alloys such as solid solution strengthening, precipitation hardening, and strain hardening. It also covers issues that can occur during welding of aluminum like solidification cracking, hot cracking, and softening in the heat-affected zone. Overall, the document provides a comprehensive overview of aluminum alloys and considerations for welding this important metal.
This document discusses various topics related to gear design including:
1. It describes the main types of gears - spur, helical, bevel, and worm gears.
2. It explains gear terminology like pitch circle, diametral pitch, pressure angle, and provides formulas for calculating gear parameters.
3. It discusses factors that influence gear strength like surface hardness, dynamic loads, mounting, and reliability. Standard equations are presented for calculating the allowable bending stress that considers these factors.
The document discusses various topics related to automotive sheet metal and body damage repair, including:
- The most common types of sheet metal and alloys used in automotive manufacturing.
- The different types of body damage such as simple bends, displaced areas, and rolled buckles.
- Techniques for classifying and analyzing direct, indirect, and work hardening types of damage.
- Properties of sheet metal like plasticity, work hardening, and elasticity that are important for repair.
- Methods for straightening damaged metal including using hammers, dollies, spoons, and air bladders.
Failure analysis in heavy duty truck framesAniket Gupta
The document discusses failure analysis of cracks in heavy duty truck frames. It describes an experimental procedure where cracks were found in a truck frame near the rear drive axle connection after endurance testing. Microscopic analysis found the cracks were caused by an aggressively drilled hole close to an existing bolt hole. Finite element simulations using FRANC3D crack growth tools correlated well with the physical crack path and cycles to failure. A sensitivity study determined that maintaining a certain distance between holes and high stress areas could prevent fatigue failures. The work provides a methodology for failure analysis of cracks in truck frames.
Dokumen tersebut membahas tentang inspeksi pengelasan, meliputi standar pengelasan, jenis proses pengelasan, posisi pengelasan, bahan konsumsi pengelasan, spesifikasi prosedur pengelasan, cacat-cacat las, dan uji non-destruktif dan visual inspeksi. Tujuan pelatihan ini adalah agar peserta memahami istilah-istilah dalam pengelasan serta cara melakukan inspeksi pengelasan.
This document lists and defines various welding defects such as porosity, incomplete penetration, slag inclusions, undercut, and cracks. It also discusses ASME Section V requirements for radiation energy density during welding to meet image quality standards. Slag inclusions are further defined as elongated or isolated, with size thresholds provided above which they are considered defects.
The document provides information about the Sanjary Educational Academy which offers certification courses in engineering disciplines like piping design, QA/QC, and safety. It describes a post graduate diploma course in process piping design and engineering over 40 days that will provide training and certification upon completion. The academy aims to train and certify engineers to international standards to work in industries like oil and gas.
This document provides terminology related to welding codes and qualifications. It defines key terms like essential variables, non-essential variables, and supplementary variables. It also discusses welding terminology like weld beads, types of joints, and weld positions. The document is part of a larger guide on welding qualification simplified according to the ASME IX Code and covers topics like steel welding metallurgy, welding processes, weld symbols, and acceptance criteria for welds.
We are the professional manufacturer of wire rod rolling mill, we also provide complete design for your rolling mill workshop, not only turnkey project but also tailor-made service, and we provide all the parts for roughing rolling mill, intermediate rolling mill process, including pinch roll, all kinds of shears, laying head, all of these crucial parts work extremely precisely and reliably.
Hani is a well-experienced enterprise; we have more than 20 year experiences in manufacturing rolling mill machinery, our core technology team is very experienced and they are all well-known in this industry in China, with high technology and best service, after decades of researching and developing in this industry, we gain really high reputation, and customer satisfaction.
DESIGN AND DEVELOPMENT FOR SPOT WELDING JIG FOR WINDOW LOWER AND UPPER OF MID...IAEME Publication
BEML is a public sector undertaking by Government of India with head quarters in Bangalore. In addition to other equipments, it manufactures SSACEMU coaches (car) for Indian Railways .In metalworking and woodworking, a jig is a type of custom-made tool used to control the location and/or motion of another. Precisely a device that does both functions (holding the work and guiding a tool) is called a jig.
This document discusses the use of magnesium alloys in aerospace applications, past concerns, and current solutions. It provides historical examples of magnesium alloy use in aircraft from 1943-1957. Past concerns included corrosion, but new corrosion resistant alloys have been developed like Elektron 21 and WE43. These alloys are now used in a variety of aircraft components and applications. Testing has shown these alloys have improved corrosion resistance and elevated temperature properties over older alloys. They also have better flame resistance and are less likely to ignite than other alloys like AZ91. Overall, new magnesium alloys are enabling greater use of the material in both aerospace and automotive applications.
This document provides a summary of Module 7, which covers Weld Procedure Qualification according to ASME Section IX. It discusses the 5 step process for qualifying a welding procedure and the variables that must be addressed in the Procedure Qualification Record (PQR). These include joint design, base metal, filler metal, position, preheat, post-weld heat treatment, gas, and electrical characteristics. An example procedure qualification is provided for a manual GTAW and GMAW weld on 0.75-inch thick A36 steel in the flat position, with no preheat or PWHT, using ER80S-D2 wire for GTAW and ER70S-6 wire for GMAW
The document discusses various welding and joining processes. It describes oxy-fuel gas welding and cutting, which uses a fuel gas and oxygen to produce different flame types for welding metals. Arc welding processes like shielded metal arc welding and gas metal arc welding are also covered, which use an electric arc between an electrode and workpiece to produce heat. The document outlines safety considerations and procedures for various welding methods.
The document provides background information on ASME (American Society of Mechanical Engineers), which was founded in 1880 and focuses on technical, educational, and research issues. It discusses ASME's Boiler and Pressure Vessel Code (BPVC), which is recognized by 116 countries and helps manufacturers demonstrate commitment to safety and quality globally. The BPVC is continuously evolving to provide rules and requirements for new materials, applications, and technologies.
Die Casting and its types By Raghav GuptaRaghav Gupta
This document provides an overview of different types of die casting processes and classifications of dies. It discusses the key aspects of various die casting methods including hot chamber die casting, cold chamber die casting, low pressure die casting, high pressure die casting, vacuum die casting, squeeze die casting, and gravity die casting. It also covers classifications of dies based on the number of impressions and materials poured, and provides examples of common applications for different metal alloys cast through die casting.
This document is a design check list for inspecting pressure vessels according to Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code. The check list contains 31 sections for verifying key elements of pressure vessel drawings and calculations, including materials, dimensions, tolerances, calculations for thickness and reinforcement, welding requirements, heat treatment, nondestructive examination, pressure testing, marking and more. The check list is intended as guidance to help ensure compliance with the ASME Code requirements for the design of pressure vessels.
The document provides an overview of Body-in-White (BIW) in automobile manufacturing. It discusses:
1. What BIW refers to - the stage where the car body sheet metal is assembled but before other components are added.
2. The main purposes of body design including aesthetics, structure, ergonomics, safety, aerodynamics, and insulation.
3. The two main types of body structures - monocoque and frame mounted. It provides descriptions and diagrams of each.
Computer-integrated manufacturing (CIM) involves integrating all enterprise operations around a common corporate data repository using integrated systems and data communications. This allows individual manufacturing processes to exchange information and coordinate actions, improving organizational efficiency. CIM aims to provide benefits like improved quality, flexibility, and competitiveness through computer control of the entire production process.
The document outlines the duties and responsibilities of a Senior Welding Inspector. It discusses that the role requires strong leadership, technical, and managerial skills. Some key responsibilities include managing inspection teams, providing guidance to inspectors, making technical decisions, planning inspections, and ensuring work is completed on time and to budget. Senior Welding Inspectors must have in-depth knowledge of welding technology, quality standards, and the ability to audit work and evaluate non-destructive testing reports. Strong communication, organization, and people management skills are also important to motivate personnel and ensure high morale is maintained throughout inspection projects.
Peaking and banding refer to the roundness and straightness of shell plates around vertical and horizontal joints in storage tanks. Peaking is measured using a horizontal sweep board along vertical joints, while banding is measured using a vertical sweep board along horizontal joints. Acceptance criteria per API standards allow for peaking deviations of up to 13 mm and banding deviations of up to 13 or 25 mm depending on the standard. Proper measurement procedures involve visually inspecting the tank, positioning the sweep board accurately, and taking measurements at a minimum of 8 locations around the tank circumference.
The document discusses various weldability tests used to evaluate the suitability of materials for welding and the performance of welded joints. It describes tests such as the Murex test, Houldcroft test, ring weldability test, controlled thermal severity test, Tekken test, implant test, and Lehigh restraint test. These tests are employed to quantify weldability and provide clues on precautions needed like filler material selection, preheat, and energy input to minimize defects like hot cracking and cold cracking in welded joints.
This document defines key terms related to iron-carbon phase diagrams and alloy microstructures, including different crystal structures (body-centered cubic, face-centered cubic), phases that can form in iron-carbon alloys (ferrite, austenite, cementite, pearlite, bainite, martensite), and concepts important to understanding phase diagrams (eutectic, eutectoid, solubility, lever rule). Definitions are provided for over 30 relevant materials science and metallurgy terms.
Hydrogen embrittlement is a phenomenon that causes metals like steel, titanium, and aluminum alloys to become brittle. It occurs when hydrogen enters these metals, reducing their ductility and load bearing capacity. There are several ways hydrogen can get into metals, such as from acid cleaning, electroplating, welding, and heat treating. Once hydrogen is absorbed, even small amounts below detection levels can cause cracking or failure of parts, especially under stress. Proper baking and controlling hydrogen exposure during manufacturing processes can help prevent failures from hydrogen embrittlement.
ME8491 ENGINEERING METALLURGY - UNIT 2karthi keyan
This document contains information about an engineering metallurgy course taught by M. Karthikeyan at AAA College of Engineering & Technology in Sivakasi, India. The course covers topics such as annealing, normalizing, hardening, tempering of steels, isothermal transformation diagrams, cooling curves, hardenability testing, and various heat treatment processes including austempering, martempering, case hardening, flame hardening, and induction hardening. It also lists three review questions about surface hardening processes.
The document provides an overview of the 3DEXPERIENCE Platform user experience. It describes the main interface elements including the top bar with options like the compass app name, search bar, user profile, and help. The compass allows instant access to all apps. The search bar allows searching across all content, while the 6W tags provide filtering. Users can also create customized dashboards and access video tutorials.
Differences in macros between catia v5 and catia v6 or 3dexperienceFernando Petre
- Macros created for CATIA V5 may not work in CATIA V6 or 3DEXPERIENCE without modifications due to differences in the automation objects, methods, and properties between the versions.
- The path and filenames for macro documentation (CHM files) differ between CATIA V5, V6, and 3DEXPERIENCE installations.
- Comparing macro code samples between versions shows changes needed in 3DEXPERIENCE code, even for macros provided in its installation folder. Users must check and modify macros to accommodate differences in the newer versions.
- While some macros may port over between V6 and 3DEXPERIENCE with minor changes, macros will generally need to be significantly modified
We are the professional manufacturer of wire rod rolling mill, we also provide complete design for your rolling mill workshop, not only turnkey project but also tailor-made service, and we provide all the parts for roughing rolling mill, intermediate rolling mill process, including pinch roll, all kinds of shears, laying head, all of these crucial parts work extremely precisely and reliably.
Hani is a well-experienced enterprise; we have more than 20 year experiences in manufacturing rolling mill machinery, our core technology team is very experienced and they are all well-known in this industry in China, with high technology and best service, after decades of researching and developing in this industry, we gain really high reputation, and customer satisfaction.
DESIGN AND DEVELOPMENT FOR SPOT WELDING JIG FOR WINDOW LOWER AND UPPER OF MID...IAEME Publication
BEML is a public sector undertaking by Government of India with head quarters in Bangalore. In addition to other equipments, it manufactures SSACEMU coaches (car) for Indian Railways .In metalworking and woodworking, a jig is a type of custom-made tool used to control the location and/or motion of another. Precisely a device that does both functions (holding the work and guiding a tool) is called a jig.
This document discusses the use of magnesium alloys in aerospace applications, past concerns, and current solutions. It provides historical examples of magnesium alloy use in aircraft from 1943-1957. Past concerns included corrosion, but new corrosion resistant alloys have been developed like Elektron 21 and WE43. These alloys are now used in a variety of aircraft components and applications. Testing has shown these alloys have improved corrosion resistance and elevated temperature properties over older alloys. They also have better flame resistance and are less likely to ignite than other alloys like AZ91. Overall, new magnesium alloys are enabling greater use of the material in both aerospace and automotive applications.
This document provides a summary of Module 7, which covers Weld Procedure Qualification according to ASME Section IX. It discusses the 5 step process for qualifying a welding procedure and the variables that must be addressed in the Procedure Qualification Record (PQR). These include joint design, base metal, filler metal, position, preheat, post-weld heat treatment, gas, and electrical characteristics. An example procedure qualification is provided for a manual GTAW and GMAW weld on 0.75-inch thick A36 steel in the flat position, with no preheat or PWHT, using ER80S-D2 wire for GTAW and ER70S-6 wire for GMAW
The document discusses various welding and joining processes. It describes oxy-fuel gas welding and cutting, which uses a fuel gas and oxygen to produce different flame types for welding metals. Arc welding processes like shielded metal arc welding and gas metal arc welding are also covered, which use an electric arc between an electrode and workpiece to produce heat. The document outlines safety considerations and procedures for various welding methods.
The document provides background information on ASME (American Society of Mechanical Engineers), which was founded in 1880 and focuses on technical, educational, and research issues. It discusses ASME's Boiler and Pressure Vessel Code (BPVC), which is recognized by 116 countries and helps manufacturers demonstrate commitment to safety and quality globally. The BPVC is continuously evolving to provide rules and requirements for new materials, applications, and technologies.
Die Casting and its types By Raghav GuptaRaghav Gupta
This document provides an overview of different types of die casting processes and classifications of dies. It discusses the key aspects of various die casting methods including hot chamber die casting, cold chamber die casting, low pressure die casting, high pressure die casting, vacuum die casting, squeeze die casting, and gravity die casting. It also covers classifications of dies based on the number of impressions and materials poured, and provides examples of common applications for different metal alloys cast through die casting.
This document is a design check list for inspecting pressure vessels according to Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code. The check list contains 31 sections for verifying key elements of pressure vessel drawings and calculations, including materials, dimensions, tolerances, calculations for thickness and reinforcement, welding requirements, heat treatment, nondestructive examination, pressure testing, marking and more. The check list is intended as guidance to help ensure compliance with the ASME Code requirements for the design of pressure vessels.
The document provides an overview of Body-in-White (BIW) in automobile manufacturing. It discusses:
1. What BIW refers to - the stage where the car body sheet metal is assembled but before other components are added.
2. The main purposes of body design including aesthetics, structure, ergonomics, safety, aerodynamics, and insulation.
3. The two main types of body structures - monocoque and frame mounted. It provides descriptions and diagrams of each.
Computer-integrated manufacturing (CIM) involves integrating all enterprise operations around a common corporate data repository using integrated systems and data communications. This allows individual manufacturing processes to exchange information and coordinate actions, improving organizational efficiency. CIM aims to provide benefits like improved quality, flexibility, and competitiveness through computer control of the entire production process.
The document outlines the duties and responsibilities of a Senior Welding Inspector. It discusses that the role requires strong leadership, technical, and managerial skills. Some key responsibilities include managing inspection teams, providing guidance to inspectors, making technical decisions, planning inspections, and ensuring work is completed on time and to budget. Senior Welding Inspectors must have in-depth knowledge of welding technology, quality standards, and the ability to audit work and evaluate non-destructive testing reports. Strong communication, organization, and people management skills are also important to motivate personnel and ensure high morale is maintained throughout inspection projects.
Peaking and banding refer to the roundness and straightness of shell plates around vertical and horizontal joints in storage tanks. Peaking is measured using a horizontal sweep board along vertical joints, while banding is measured using a vertical sweep board along horizontal joints. Acceptance criteria per API standards allow for peaking deviations of up to 13 mm and banding deviations of up to 13 or 25 mm depending on the standard. Proper measurement procedures involve visually inspecting the tank, positioning the sweep board accurately, and taking measurements at a minimum of 8 locations around the tank circumference.
The document discusses various weldability tests used to evaluate the suitability of materials for welding and the performance of welded joints. It describes tests such as the Murex test, Houldcroft test, ring weldability test, controlled thermal severity test, Tekken test, implant test, and Lehigh restraint test. These tests are employed to quantify weldability and provide clues on precautions needed like filler material selection, preheat, and energy input to minimize defects like hot cracking and cold cracking in welded joints.
This document defines key terms related to iron-carbon phase diagrams and alloy microstructures, including different crystal structures (body-centered cubic, face-centered cubic), phases that can form in iron-carbon alloys (ferrite, austenite, cementite, pearlite, bainite, martensite), and concepts important to understanding phase diagrams (eutectic, eutectoid, solubility, lever rule). Definitions are provided for over 30 relevant materials science and metallurgy terms.
Hydrogen embrittlement is a phenomenon that causes metals like steel, titanium, and aluminum alloys to become brittle. It occurs when hydrogen enters these metals, reducing their ductility and load bearing capacity. There are several ways hydrogen can get into metals, such as from acid cleaning, electroplating, welding, and heat treating. Once hydrogen is absorbed, even small amounts below detection levels can cause cracking or failure of parts, especially under stress. Proper baking and controlling hydrogen exposure during manufacturing processes can help prevent failures from hydrogen embrittlement.
ME8491 ENGINEERING METALLURGY - UNIT 2karthi keyan
This document contains information about an engineering metallurgy course taught by M. Karthikeyan at AAA College of Engineering & Technology in Sivakasi, India. The course covers topics such as annealing, normalizing, hardening, tempering of steels, isothermal transformation diagrams, cooling curves, hardenability testing, and various heat treatment processes including austempering, martempering, case hardening, flame hardening, and induction hardening. It also lists three review questions about surface hardening processes.
The document provides an overview of the 3DEXPERIENCE Platform user experience. It describes the main interface elements including the top bar with options like the compass app name, search bar, user profile, and help. The compass allows instant access to all apps. The search bar allows searching across all content, while the 6W tags provide filtering. Users can also create customized dashboards and access video tutorials.
Differences in macros between catia v5 and catia v6 or 3dexperienceFernando Petre
- Macros created for CATIA V5 may not work in CATIA V6 or 3DEXPERIENCE without modifications due to differences in the automation objects, methods, and properties between the versions.
- The path and filenames for macro documentation (CHM files) differ between CATIA V5, V6, and 3DEXPERIENCE installations.
- Comparing macro code samples between versions shows changes needed in 3DEXPERIENCE code, even for macros provided in its installation folder. Users must check and modify macros to accommodate differences in the newer versions.
- While some macros may port over between V6 and 3DEXPERIENCE with minor changes, macros will generally need to be significantly modified
The document describes 3Dcom's multi-tier architecture including servers, clients, and data access. Key elements include:
- A multi-tier architecture with PDM, CAD, and application servers, as well as client applications.
- Unified data access across systems via server federation, authentication, XML repositories, and various protocols like HTTP, CORBA, and XML.
- 2D and 3D viewers that can access data locally or remotely via HTTP streaming and CORBA.
- Support for disconnected access via Nomad mode similar to Lotus Notes.
Dassault systemes enovia multi cad 2012David Segal
This document summarizes ENOVIA xCAD, a product from Dassault Systemes that enables multi-CAD collaboration. It integrates mechanical and electrical CAD applications for design data management, multi-CAD collaboration, and 3D visualization. The solution supports collaboration across various CAD tools including Autodesk, PTC, Siemens, Bentley and Cadence. It manages CAD data across the enterprise and value stream through processes like BOM, compliance and suppliers. The document outlines key capabilities and use cases to facilitate manufacturers' multi-CAD strategies and provides metrics on productivity improvements customers have achieved with ENOVIA xCAD.
Working with CATIA V5 in 3DEXPERIENCE 2017x updated platform. Learn how to access commands and functions.
Get more free 3DEXPERIENCE apps demo here:
http://www.mecanicasolutions.com/3dexperience-webinar-ondemand/
PLM Innovation Congress 2011: PLM and Engineering Software Trends Oleg Shilovitsky
The document discusses future trends in engineering software. It notes that mobile devices are becoming equivalent to laptops for work. Social technologies will be increasingly important for collaboration. Open source software will become more prominent in enterprises. Cloud computing will continue to be confusing to implement. Engineering data will be distributed across networks rather than centralized databases. PLM solutions may not be necessary if the essential functions can be achieved more simply and at lower cost through alternative approaches. The conclusion is that "no PLM" does not mean the end of product lifecycle management, but that the goals of PLM may be achieved through different and more flexible means.
This document provides shortcuts for searching for different object types and commands in the 3DEXPERIENCE platform. It lists shortcuts for finding physical products, 3D parts, drawings, materials, and other items. Common search shortcuts include prd:, 3dpart:, drw:, mat:, and doc:. It also outlines shortcuts for top bar commands like Ctrl+C for copy and Ctrl+V for paste. Scene layout shortcuts are provided to zoom and navigate the tree view.
The document summarizes the CATIA modeling and kinematics project of a nitro RC car completed by a group of students. It describes the components modeled by each group member, including the engine, frame, suspension, transmission, and other parts. The group encountered many challenges with CATIA crashes and file corruption during the over 60 hours spent on the complex kinematics and assembly modeling of the over 200 components car.
This document provides instructions for downloading and installing CATIA V5 Student Edition. It includes details on the application process, prerequisites, downloading and installing the software, and troubleshooting tips. The guide outlines the key differences between the student and commercial versions, the included workbenches, and eligibility requirements. Frequently asked questions are also addressed throughout the document.
3DCS is Fully Integrated in CATIA V6 3DExperience PlatformBenjamin Reese
Bring your dimensional analysis into the 3DExperience from Dassault Systemes and optimize your designs to reduce rework, scrap and warranty claims.
With powerful tools and quality solutions, 3DCS empowers engineers and designers to bring their CAD models to life, using real data and realistic 3d simulation in order to analyze products before producing them.
These virtual prototypes let the designers tweak and fix issues before they become costly, reducing time to market and the possibility of problems later on.
Find out how 3DCS can help you reduce stress from manufacturing issues and empower you to reduce physical prototyping.
CATIA is a 3D CAD software created by Dassault Systèmes. It is used in industries like aerospace, automotive, and shipbuilding. CATIA allows users to create 3D models of parts and assemblies. It provides tools for sketching, part design, sheet metal design, and more. Key features include the specification tree to view a part's design history, assembly design tools to combine parts while defining relationships and constraints, and surface modeling tools for complex shapes.
The document provides an overview of CATIA V5 software and its various modeling tools. It discusses the software scenario, sketcher workbench, part design workbench, surface-based features, generative shape design, assembly, and drafting. The sketcher section describes how to create sketches using lines, arcs, circles, splines, and add constraints. The part mode section explains how to use pads, multi-pads, and drafted filleted pads to extrude profiles.
This document provides an introduction to CATIA V5's Assembly Design workbench. It allows users to assemble parts (CATParts) into larger assemblies (CATProducts). CATProducts contain a specification tree that defines the product structure and maintains part positions using assembly constraints. The workbench provides toolbars for tasks like adding components, applying constraints, and creating symmetrical assemblies. It also enables assembly operations and contextual links between parts.
This document provides step-by-step instructions to install Windows 7 on a machine with at least 20GB of unallocated space. The steps include booting from the Windows 7 DVD, selecting installation options like language and keyboard, accepting the license agreement, partitioning the unallocated space, completing the installation process which may require several restarts, setting up a username and password, activating Windows 7 with a product key, configuring time zone and location settings. Upon completing all the steps, Windows 7 installation is finished.
ArcherGrey is a global consulting firm that specializes in ENOVIA PLM solutions. They offer a range of implementation, upgrade, optimization, and support services for the ENOVIA platform. Their experienced consultants have extensive expertise implementing, upgrading, and supporting all versions of ENOVIA. ArcherGrey can customize a services package for each client's specific needs and goals.
Janhavi Mishra is a Test Automation Engineer with over 2 years of experience working with Amdocs. She has expertise in test automation, including tools like Selenium Webdriver, UFT, Unix, Linux, and SQL. Some of her key skills and responsibilities include automation testing, regression testing, integration testing, unit testing, and shell scripting. She has received several appreciation emails for finding critical bugs and delivering projects on time. Janhavi holds an M.C.A. in Computer Science and seeks to further contribute her technical skills and experience.
The document discusses various technologies for reinforcing and strengthening different types of structures using composite materials. It describes several techniques for manufacturing composite materials like hand lay-up and filament winding. It also discusses applications of composites for reinforcing concrete, masonry, wooden, steel and telecommunication structures through case studies and analysis.
This presentation describes the Dassault Systemes Transformational Marketing Journey from being an R&D driven company to a market driven company.
I keynoted this presentation in London on November 6th 2013 at the Sirius Decisions European Summit.
This document provides hosting and email package options with different price levels. It offers unlimited domains, hosting, FTP, bandwidth, emails, and pages. Pricing ranges from $120 to $181,395 depending on the package level which includes more storage and bandwidth. It also mentions making money by building an organization and earning commissions from purchases.
The document describes an online hosting and email service that provides unlimited domains, hosting, FTP, bandwidth, emails, and Mega MH panel. It also describes a multi-level marketing structure where users can earn commissions based on purchases by people in their organization, with earnings increasing as the size of the organization grows. Key details about the company are provided, including that it is incorporated in Turkey and has been operating since 1999.
This document discusses WordPress and Server2Go. WordPress is an open-source content management system that can be used to create blogs, websites, and online communities. Server2Go allows users to install and run a full web server on a USB drive, including Apache, PHP, MySQL, and WordPress. The document provides step-by-step instructions for installing WordPress using Server2Go, including creating databases, configuring settings, adding pages and posts, embedding multimedia like SlideShare presentations, and using plugins. It also outlines different roles involved in maintaining a WordPress site, from web designers to system administrators.
This document discusses WordPress and Server2Go. WordPress is an open-source content management system that can be used to create blogs, websites, and online communities. Server2Go allows users to install and run a full web server on a USB drive, including Apache, PHP, MySQL, and WordPress. The document provides step-by-step instructions for installing WordPress using Server2Go, including creating databases, configuring settings, adding pages and posts, embedding multimedia like SlideShare presentations, and using plugins. It also outlines different roles involved in maintaining a WordPress site, from web designers to system administrators.
This document discusses WordPress and Server2Go. WordPress is an open-source content management system that can be used to create blogs, websites, and online communities. Server2Go allows users to install and run a full web server on a USB drive, including Apache, PHP, MySQL, and WordPress. The document provides step-by-step instructions for installing WordPress using Server2Go, including creating databases, configuring settings, adding pages and posts, embedding multimedia like SlideShare presentations, and using plugins. It also outlines different roles involved in maintaining a WordPress site, such as web designers, programmers, and system administrators.
This document discusses WordPress and Server2Go. It provides an overview of WordPress as an open source content management system (CMS) that can be used to create blogs, websites, and online communities. It also describes how Server2Go allows WordPress to be installed and run from a USB drive or CD-ROM without needing a permanent server. Instructions are provided on setting up WordPress using Server2Go, including installing MySQL, creating databases, and configuring WordPress. Additional topics covered include using plugins, embedding content like slides and videos, and basic website administration functions in WordPress.
The cloud gives you the ability to manage your IT more effectively. All this means that you can focus on your core business and stop worrying about your IT infrastructure. No wonder it is quite a tantalizing option!
EE12 - Customer Lifecycle Nurture with Marketing AutomationZee Jeremic
Nurturing isn’t just for leads or prospects; it can be highly effective for customers as well! See how Ariba and Accelent Consulting were able to combine the power of Eloqua with their own SaaS product to send customer communications that include behavior tracking, customer usage data, split testing, messaging segmentation and more. All messages are delivered at just the right time triggered by customer activity, and include upsell/cross-sell language for other products or services.
---
Presenters:
Geo Catano, Senior Manager, Demand Generation, Ariba
Zee Zdravko Jeremic, Principal, Accelent Consulting
Location:
Eloqua Experience 2012
Orlando, Florida
November 8, 2012
This document describes an unlimited web hosting plan that includes domains, hosting, email, subdomains, bandwidth, and pages. It also outlines a multi-level marketing structure with different groups and explains that income depends on effort and daily commissions are based on purchases in the organization. It provides income potential levels for groups 1 and 2 ranging from $120 to $169,395 and notes the company was incorporated internationally in 1999.
MojoMojo is a web 2.0 wiki built with Perl technologies like Catalyst and DBIx-Class. It features AJAX-powered trees, RSS feeds, version control, internationalization, tagging, permissions, attachments, searching, and more. It has been under development for 4 years as an open source project hosted on GitHub, where community members can contribute or request commit access. Support is available commercially for installation, customization, and support.
- Social platforms like wikis and blogs allow for collaborative documents, shared online workspaces, and searchable knowledge that anyone can post or edit.
- Wikis are websites that allow anyone to contribute or modify content using simplified markup language. They are often used for collaborative websites and knowledge management in businesses.
- Blogs are websites with regular chronological posts about anything that can be tagged and searched. They also support RSS feeds so users can get content when they want it.
- Open-source platforms like Drupal and WordPress are free alternatives to paid platforms that also support features like Active Directory, blogs, wikis, and large support communities.
Similar to Ds catia v6 r2012x 32 64bit full multilanguage setup & crack (by ssq) cg-persia (12)
1. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
Translate This Page
Translate This Page
Blog Register FAQ Search IRC Chat Todays Posts
User Name User Name Remember Me?
CGPersia Forums > CG Releases > Full Applications - Releases
DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) Password Log in
Donation Goal
Goal amount for the next month: 230 USD, Received: 192 USD (84%) Donate Now
It's that time of the month where we apologetically have to annoy you with a cat <3. As usual, we need to collect $230 usd before/on the 25th (Paid, Collecting rest) to keep our data center from rage quitting/null routing
on us.
So please give it a bit of thought if our ad-free sites (CGPersia Blog, Forum, CGPeers) have been useful for you and/or your feline friend this month. If so, we would greatly appreciate your support.
Note: Your donation will appear once it has been manually confirmed. So there will be a bit of a delay. Thanks! - 230 USD - 184 EURO - 147 GBP
LibertyReserve: U6082613
Page 1 of 2 1 2 >
Thread Tools Search this Thread
05-03-2012 #1
eway33 DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ)
Join Date: Dec 2009 from this websit:
Posts: 159
Thanked: 47 Times Links:
Thanked: 166 Others You are unable to view this content until you register.
DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ)
READ THIS FIRST!!
1. Download "CATIA_V6_R2012x_Install_manual_n_crack_SSQ.rar" and study movi "Catia_V6_R2012x_Install_n_crack_Manual_SSQ.mp4" showing process of V6 R2012x Setup & crack!
2. To run CATIA V6 R2012x you need first of all to install Enovia VPM Express Server from CATIA_V6_R2012x_SSQ_Server_DVD3.iso !
Minimum system requirements for computer to install Enovia Server:
64-bit CPU 4 core, 8 GB RAM (16 GB recomended), Microsoft Windows 64-bit + SQL Server 2008 R2
If you have no 64-bit computer (local or network) with proper system requirements for Enovia Server installation you must FORGET about V6 R2012x! You will not be able to run it!
ATTENTION! Installations of some pre-requisites needed to use Enonia Server ( SQL Server 2008 R2 64 bit, Mozilla FireFox, NET Framework 3.5 SP1.. and other > see movi Catia_V6_R2012x_Install_n_crack_Manual_SSQ.mp4 for more info) are not included in V6
R2012x official media. You mast download and install it yourself if needed!
3. On CATIA_V6_R2012x_SSQ_Server_DVD3.iso there are setups of cracked DS License Server (32-bit and 64-bit)
../V6_License_Server/1/Windows32/DSLS.msi
../V6_License_Server/1/Windows64/DSLS.msi
If you already have got DSLS instaled from official media installations you mast deinstall them and install SSQ's ones from CATIA_V6_R2012x_SSQ_Server_DVD3.iso or from separate SSQ's crack!
4. On CATIA_V6_R2012x_SSQ_Server_DVD3.iso you can find folder _SolidSQUAD_ with DSLS_LicGen_SSQ.exe and file CATIA V6R2012x.SSQ for license generation
5. CATIA_V6_R2012x_SSQ_Client32_DVD1.iso includes installation of CATIA V6 R2012x 32-bit client on computers (local or network) with Windows XP/Vista/Win7 32-bit
6. CATIA_V6_R2012x_SSQ_Client64_DVD2.iso includes installation of CATIA V6 R2012x 64-bit client on computers (local or network) with Windows XP/Vista/Win7 64-bit
115.com links
Download this first!
CATIA_V6_R2012x_Install_manual_n_crack_SSQ
Links:
You are unable to view this content until you register.
... ual-n-crack-SSQ.rar
CATIA-V6-R2012x-SSQ-Client32-DVD1
Links:
You are unable to view this content until you register.
... nt32-DVD1.part1.rar
Links:
You are unable to view this content until you register.
... nt32-DVD1.part2.rar
Links:
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
2. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
You are unable to view this content until you register.
... nt32-DVD1.part3.rar
Links:
You are unable to view this content until you register.
... nt32-DVD1.part4.rar
Links:
You are unable to view this content until you register.
... nt32-DVD1.part5.rar
Links:
You are unable to view this content until you register.
... nt32-DVD1.part6.rar
CATIA-V6-R2012x-SSQ-Client64-DVD2
Links:
You are unable to view this content until you register.
... nt64-DVD2.part1.rar
Links:
You are unable to view this content until you register.
... nt64-DVD2.part2.rar
Links:
You are unable to view this content until you register.
... nt64-DVD2.part3.rar
Links:
You are unable to view this content until you register.
... nt64-DVD2.part4.rar
Links:
You are unable to view this content until you register.
... nt64-DVD2.part5.rar
Links:
You are unable to view this content until you register.
... nt64-DVD2.part6.rar
CATIA-V6-R2012x-SSQ-Server-DVD3
Links:
You are unable to view this content until you register.
... rver-DVD3.part1.rar
Links:
You are unable to view this content until you register.
... rver-DVD3.part2.rar
Links:
You are unable to view this content until you register.
... rver-DVD3.part3.rar
Links:
You are unable to view this content until you register.
... rver-DVD3.part4.rar
Links:
You are unable to view this content until you register.
... rver-DVD3.part5.rar
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
3. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
Links:
You are unable to view this content until you register.
... rver-DVD3.part6.rar
RapidShare
Download this first!
CATIA_V6_R2012x_Install_manual_n_crack_SSQ
h-ttps://www.rapidshare.com/files/1858918685/CATIA_V6_R2012x_Install_manual_n_crack_SSQ.rar
CATIA-V6-R2012x-SSQ-Client32-DVD1
h-ttps://www.rapidshare.com/files/927946248/CATIA_V6_R2012x_SSQ_Client32_DVD1.part1.rar
h-ttps://www.rapidshare.com/files/1444201989/CATIA_V6_R2012x_SSQ_Client32_DVD1.part2.rar
h-ttps://www.rapidshare.com/files/2051192952/CATIA_V6_R2012x_SSQ_Client32_DVD1.part3.rar
h-ttps://www.rapidshare.com/files/3192482726/CATIA_V6_R2012x_SSQ_Client32_DVD1.part4.rar
h-ttps://www.rapidshare.com/files/1817375029/CATIA_V6_R2012x_SSQ_Client32_DVD1.part5.rar
h-ttps://www.rapidshare.com/files/4245584097/CATIA_V6_R2012x_SSQ_Client32_DVD1.part6.rar
CATIA-V6-R2012x-SSQ-Client64-DVD2
h-ttps://www.rapidshare.com/files/2813640710/CATIA_V6_R2012x_SSQ_Client64_DVD2.part1.rar
h-ttps://www.rapidshare.com/files/2115803963/CATIA_V6_R2012x_SSQ_Client64_DVD2.part2.rar
h-ttps://www.rapidshare.com/files/2264693833/CATIA_V6_R2012x_SSQ_Client64_DVD2.part3.rar
h-ttps://www.rapidshare.com/files/1193404007/CATIA_V6_R2012x_SSQ_Client64_DVD2.part4.rar
h-ttps://www.rapidshare.com/files/3983673393/CATIA_V6_R2012x_SSQ_Client64_DVD2.part5.rar
h-ttps://www.rapidshare.com/files/1352900137/CATIA_V6_R2012x_SSQ_Client64_DVD2.part6.rar
CATIA-V6-R2012x-SSQ-Server-and-Docs-DVD3
h-ttps://www.rapidshare.com/files/2063347167/CATIA_V6_R2012x_SSQ_Server_DVD3.part1.rar
h-ttps://www.rapidshare.com/files/964737114/CATIA_V6_R2012x_SSQ_Server_DVD3.part2.rar
h-ttps://www.rapidshare.com/files/4270545996/CATIA_V6_R2012x_SSQ_Server_DVD3.part3.rar
h-ttps://www.rapidshare.com/files/552288787/CATIA_V6_R2012x_SSQ_Server_DVD3.part4.rar
h-ttps://www.rapidshare.com/files/3641517917/CATIA_V6_R2012x_SSQ_Server_DVD3.part5.rar
h-ttps://www.rapidshare.com/files/466224137/CATIA_V6_R2012x_SSQ_Server_DVD3.part6.rar
or torrent:
Links:
You are unable to view this content until you register.
is Offline
The Following 11 Users Say Thanks abstract77, bamusta, buddhabas, emage, friggson, Karimousa, Kirua, lardizabal, smokeyser, userosaurus, vsrskvsrsk
05-03-2012 #2
luta thxs already got this just dosent install it for now, the login in enovia server put me out.will wait to listen what ppl will tell with they installation.
Join Date: Jun 2010
Posts: 80
Thanked: 12 Times
Thanked: 107 Others
is Offline
05-03-2012 #3
Bgood Please CGpeers torrent. Thanks
Join Date: Feb 2010
Posts: 464
Thanked: 167 Times
Thanked: 74 Others
is Offline
05-03-2012 #4
userosaurus i cant believe my eyes.. ultrathanks if this works eway33 but i think a torrent would be very welcome
Join Date: Mar 2012
Posts: 117
Thanked: 96 Times
Thanked: 131 Others
is Offline
05-03-2012 #5
Cadmium77 installation is a bitch on this baby. I'm as far as the final log in for Catia itself
Hope this helps;
Links:
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
4. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
You are unable to view this content until you register.
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
Join Date: Oct 2009 http://houdini-pythonstudents.blogspot.com
Posts: 2,768
Thanked: 1,038 Times
Thanked: 2,120 Others
is Online
The Following 2 Users Say Thanks dreatica, granado
05-03-2012 #6
nesteman I`m on win7 & I can`t connect to the ENOVIA portal
Join Date: Nov 2011
Posts: 17
Thanked 1 Time in 1 Post
Thanked: 0 Others
is Offline
05-03-2012 #7
gianluca catia 2012 ????????? is true ??????? i do not believe ???
Join Date: Oct 2009
Posts: 129
Thanked: 54 Times
Thanked: 2 Others
is Offline
05-03-2012 #8
Komplkx @nesteman - are you running win 7 64bit? I think its required for Enovia
Join Date: Mar 2012
Posts: 2
Thanked: 0 Times
Thanked: 12 Others
is Offline
05-03-2012 #9
epiclulz 64 bit needed not windows 7 you can run it on 2008r2,xp whatever just 64 bit
Join Date: Jul 2011
Posts: 150
Thanked: 28 Times
Thanked: 34 Others
is Online
05-03-2012 #10
gianluca ????????????????????????????????????????????
---------- Post added at 09:02 AM ---------- Previous post was at 09:01 AM ----------
is a dream !!!!
Join Date: Oct 2009
Posts: 129
Thanked: 54 Times
Thanked: 2 Others
is Offline
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
5. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
05-03-2012 #11
nesteman yes, it`s x64. everything went well untill step 7. I can`t connect to the ENOVIA portal. I`ve typed the path like in the tutorial but it refuse to connect.
Join Date: Nov 2011
Posts: 17
Thanked 1 Time in 1 Post
Thanked: 0 Others
is Offline
05-05-2012 #12
Cadmium77 Links:
You are unable to view this content until you register.
You're not setting up the license file correctly.
Are you using XP or Windows 7??
if so
XP;
Join Date: Oct 2009
Posts: 2,768 C:Documents and Settings All Users Application Data DassaultSystemes Licenses (you have to create the Licenses folder in Dassault Systems)
Thanked: 1,038 Times
Thanked: 2,120 Others On Vista And Windows 7 and Windows Server 2008;
C:Program Data DassaultSystemes Licenses (create Licenses folder)
Note you might not be able to see Program Data's folder in Windows 7 etc so you must write into START "hidden folders" then click on "Show Hidden Files And Folders"
Then choose to Show hidden files , folders and drives.
It should show up in a half transparent form then.
A further note...this is where you'll place your DSLicSrv.txt file that you'll create. You'll use this file twice; once to place in "localhost:4085" which will direct the computer to yoru licesnse files you've inserted. The CatiaV6R2012.,SSQ+IIM-
434210E081B2CE5C_(yourcomputer's name).licz file will be in
Libraries Documents
just sitting in the open...don't put it into a folder.
Later when you're installing your license for CatiaV6 (client) you'll install DSLicSrv in the same place ...in ProgramData...
and then your DSLicSrv.txt file will look like this;
localhost:4085
(your computer's name):4085
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
Last edited by Cadmium77; 05-05-2012 at 12:24 AM.
is Online
05-05-2012 #13
chinwhi Is this with natural sketch?
Join Date: May 2009
Posts: 20
Thanked: 0 Times
Thanked: 1 Others
is Offline
05-05-2012 #14
Cadmium77 Links:
You are unable to view this content until you register.
You betcha.
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
Join Date: Oct 2009
Posts: 2,768
Thanked: 1,038 Times
Thanked: 2,120 Others
is Online
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
6. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
The Following User Says Thanks 3DEXILE
05-05-2012 #15
hayri21 Dassault Systemes CATIA V5R21 SP2 (x86/x64) | 5.62 GB
Join Date: May 2012 Links:
Posts: 3
Thanked: 2 Times You are unable to view this content until you register.
Thanked: 0 Others
is Offline
The Following User Says Thanks bamusta
05-06-2012 #16
ravenzep Installed everything fine.... Now how do you launch it? It is not straight forward, and there is nothing about it on the video tutorial for install. When you launch it 2 windows pop up, and i dont know how to fill the fields correctly.
Any help would be welcome, and i think for most people.
THANKS
Join Date: Jan 2010
Posts: 49
Thanked: 7 Times
Thanked: 2 Others
is Offline
05-06-2012 #17
Cadmium77 Links:
You are unable to view this content until you register.
As soon as you created user "yournick" in Enovia you can use the following parameters in CATIA connection;
Alias = Arbitrary name
Set IP address of your Computer
Port 8070 and rootURI leave intact
User "yournick"
Join Date: Oct 2009 password will be "yournick" again, not the password you created for Enovia during installation.
Posts: 2,768
Thanked: 1,038 Times
Thanked: 2,120 Others But hold on; once you've got into Catia your problems will not be over
How do you save your work? How do you import and export files?
You "propagate' it. No I don't have a clue. It seems you have to go to technical school for 2 years to become a database admin to figure it all out. Anyone who knows the mysteries of how to save CATPart files and extract STEP and IGES or FBX files out of this
vast beast of a program please let me know.
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
is Online
05-06-2012 #18
Zlerot Dear friends,
I have little knowlegde about Siemens Teamcenter, which I think it may be similar to Enovia.
Join Date: May 2012 The thing is, when you create part or assebly, you actually dont care where it is stored. You can share your file with your coleagues and other parties, but you dont mess with folder and files.
Posts: 1
Thanked: 0 Times
Thanked: 0 Others
is Offline
05-06-2012 #19
myu All works very fine !
I tested it in Windows 7 x64 Home Edition (4GB DRAM) (in the same machine I installed SERVER and CLIENT x64) ENOVIA Server use SQL Server Express 2008 R2 (FREE version of SQL Server) always in the same machine. The database ENOVIA_DB is 512 MB and
Join Date: Apr 2009 the CATIA Client x64 is 6.8 GB size on disk !
Posts: 55 The installation of all with video-tutorial is 1 hour ...
Thanked: 38 Times
Thanked: 1 Others the major think that I like in CATIA V6R2012x is the 3D Live Rendering based on Mental Ray iRAY that work fine with my GTX 580 with 3GB
What is not understand is how to delete "yournick" and how to delete the project just created in ENOVIA web portal
Another think tat I not understand is how to assign the correct licenze, SolidSquad gift to you 1000 connections concurrently and 686 products license (Features) per user !
Solid Squad is fantastic !
the same version you can find at
http://forum.cgpersia.com/f13/dassau...-r2012x-52573/
there also a torrent file
is Online
05-06-2012 #20
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
7. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
ravenzep THANK YOU cadmium. Cheers mate!
Join Date: Jan 2010
Posts: 49
Thanked: 7 Times
Thanked: 2 Others
is Offline
05-07-2012 #21
Cadmium77 Links:
You are unable to view this content until you register.
Did you figure out how to save or propagate or export or import your work?
Links:
You are unable to view this content until you register.
Join Date: Oct 2009
Posts: 2,768
Thanked: 1,038 Times Links:
Thanked: 2,120 Others
You are unable to view this content until you register.
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
Last edited by Cadmium77; 05-07-2012 at 01:15 AM.
is Online
05-07-2012 #22
GeBi Links:
Join Date: Apr 2010 You are unable to view this content until you register.
Posts: 5
Thanked 2 Times in 1 Post
Thanked: 240 Others
this text discribes a bit how catia v6 and enovia v6 works and wat you can't do
is Online
The Following 2 Users Say Thanks Cadmium77, Ichio
05-07-2012 #23
myu Yes sometimes apper this message, also appear in another machine with Windows Server 2008 R2 Standardand and SQL Server 2008 R" Enterprise with 18 GB DRAM
CATIA is giant software and is very very complex to understand because there are many many features.
I am not a specialist in CATIA this is the first time that i can use CATIA.
Join Date: Apr 2009 I spent several hours to understand how to use Live Redering.
Posts: 55 All data can be saved in database or locally ...
Thanked: 38 Times
Thanked: 1 Others
is Online
05-07-2012 #24
Cadmium77 So has anyone been successful in propagating or exporting or importing yet? Like I'll have to go to Technical College for 2 years of intensive study as a DBA to begin to figure out how to save stuff in this program? lol
---------- Post added at 11:54 AM ---------- Previous post was at 03:15 AM ----------
Links:
You are unable to view this content until you register.
It can? Have you done so? how?
__________________
Join Date: Oct 2009 VISIT THE HOUDINI PYTHON STUDENT'S BLOG
Posts: 2,768 If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
Thanked: 1,038 Times
Thanked: 2,120 Others http://houdini-pythonstudents.blogspot.com
Last edited by Cadmium77; 05-07-2012 at 12:12 PM.
is Online
05-07-2012 #25
Ichio @Cadmium77
may be this sheds some more light onto the clouded topic:
Join Date: Apr 2010 "Thoughts On Migration To V6"
Posts: 1,461
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
8. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
Thanked: 1,121 Times Links:
Thanked: 2,164 Others
You are unable to view this content until you register.
is Online
The Following 3 Users Say Thanks Cadmium77, dreatica, Komplkx
05-08-2012 #26
Peanuit Anymore feedback on this one ,chaps. The video seems to indicate a separate machine for the server? Anyone able to save yet? Import ,export?
The whole thing looks straightforward. Create your own Enovia then install Catia but is sooo convoluted , very easy to miss a step.
Join Date: Jul 2011 More success stories please!
Posts: 29
Thanked: 4 Times Cheers Guys
Thanked: 1 Others
is Offline
05-08-2012 #27
Cadmium77 Links:
You are unable to view this content until you register.
MyuMyu posted this;
In VirtualBox 4.1.14 I can install V6R2012x ENOVIA PLM Express - Server ! with this software/caracteristics
- Windows 2008 Server x64 Standard
- Installer 4.5
- .NET Framework 3.5.1
Join Date: Oct 2009 - Mozilla Firefox 12.0
Posts: 2,768 - Microsoft SQL Express 2008 R2 x64 with Management Studio
Thanked: 1,038 Times 2 GB RAM and 1 processor.
Thanked: 2,120 Others
all work fine !
and this;
try it and i respond you as soon as possible,
the installation of ENOVIA SERVER take a lot lot of time ...
I wrote all work fine but the test is complete only when i can propagate 3d parts or products to Database
Sorry for my effort entusiasm but I think than all will work very fine.
This Installation with a virtual server is very usefull for the future installations
please someone can explain me how to delete users and/or project from Enovia Server
and finally this;
OK - All work fine ! I make the test to propagate to virtual server enovia !
Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register.
I make a very dirty experiment:
In my phisycal PC with Windows 7 Home Edition x64 (4 GB DRAM and 500 GB HD)
I install:
- VirtualBox 4.1.14
- CATIA V6 Client (Complete Install) 64 bit
then
I create a new Virtual Machine (2 GB DRAM - 250 HD - 1 Processor)
Then I install:
Windows 2008 x64 Standard Edition (SP0) English
- Installer 4.5
- .NET Framework 3.5.1
- Mozilla Firefox 12.0
- Microsoft SQL Express 2008 R2 x64 with Management Studio
then from DVD number 3 I install
V6 License Server
ENOVIA PLM Express Server
ENOVIA 3D Indexing Server
Documentation
All in the same virtual machine !
The entire installation use only 1,7 GB (ENOVIA PLM Server with 2008 and SQL server running!)
From (Phsical PC) I logged in ENOVIA Serv WEB Portal
I Create a User and a New Project
Then I run the CATIA Client x64 and logon to ENOVIA Serv with new user
Again All Works very fine also propagate !
__________________
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
9. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
is Online
The Following 3 Users Say Thanks dreatica, granado, Ichio
05-08-2012 #28
Peanuit Thanks Cadmium77, so if I understand correctly ,Install Catia client on host machine then in virtualbox Windows 2008 server and Enovia etc as per video. I will give it a go.
Cheers
Join Date: Jul 2011
Posts: 29
Thanked: 4 Times
Thanked: 1 Others
is Offline
05-08-2012 #29
Cadmium77 Links:
You are unable to view this content until you register.
I'm not sure. I'm at the store right now buying a USB thumb drive to try it right now.
downloading windows server 2008 r2
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
Join Date: Oct 2009
Posts: 2,768 http://houdini-pythonstudents.blogspot.com
Thanked: 1,038 Times
Thanked: 2,120 Others Last edited by Cadmium77; 05-08-2012 at 11:33 PM.
is Online
05-10-2012 #30
Cadmium77 Posted at Demonoid today;
Posted by
Links:
You are unable to view this content until you register. Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register. [ Complain ] [ Send PM ]
Join Date: Oct 2009
Posts: 2,768
Thanked: 1,038 georgenaval[/URL] 9 hours ago
Times
Thanked: 2,120 Others i should write that catia run from a single pc. i have i7 930 with 12 gb ram and both server and client runs quite well. you must install microsoft sql server not the free one
Links:
You are unable to view this content until you register.
for the server.
I'm going to give this a try..
...
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
is Online
05-10-2012 #31
mountainste I'm as far as the final log in for Catia itself
Links:
Join Date: May 2012
Posts: 7 You are unable to view this content until you register.
Thanked: 0 Times
Thanked: 0 Others
is Offline
05-10-2012 #32
granado Which one it´s working? (Microsoft sql server) Enterprise Edition, Business Intelligence, Standard.
Join Date: Aug 2009
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
10. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
Posts: 128
Thanked: 43 Times Links:
Thanked: 126 Others
You are unable to view this content until you register.
is Offline
05-10-2012 #33
Action Cool ~~~Thank you
Join Date: Oct 2011
Posts: 12
Thanked: 0 Times
Thanked: 1 Others
is Offline
05-11-2012 #34
Cadmium77 well make sure that you're using Microsoft SQL 2008 not 2012. 2012 isn't supported by Enovia..we found that out today..
---------- Post added at 06:38 PM ---------- Previous post was at 04:19 PM ----------
Posted by
Links:
You are unable to view this content until you register. Links:
You are unable to view this content until you register.
Links:
Join Date: Oct 2009 You are unable to view this content until you register. [ Complain ] [ Send PM ]
Posts: 2,768
Thanked: 1,038
Times georgenaval[/URL] 4 hours ago
Thanked: 2,120 Others
Propagation problem solved
Links:
You are unable to view this content until you register.
. If you have problems like propagate won't work or export to catpart the solution is as follows. When you create a user in web's Enovia and after that a project you have to select Project Leader also (check the box). Then when you start the
client you put user name = yourname password = yourname(same as user name) and in option button-->Select and in Security Context you choose VPLMProjectLeader.CompanyName.name_off_the_project _you_created
so you have select the project leader to manipulate the project and not the administrator. after that you are able to do ANYTHING you could't. I mean you can propagate and you can also save locally and also translate all files you create
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
is Online
The Following 3 Users Say Thanks granado, Kirua, smokeyser
05-12-2012 #35
smokeyser Thanks, works great! And thanks for the tips on how to get it working, cadmium. I was stuck on that silly context issue for an hour. I've got it all running on a single windows 7 amd machine using sql server 2008 enterprise. Surprisingly it even makes full use of the
ancient nvidia gts 250 in my desktop pc when rendering, though the card is obviously too old/weak for that kind of work.
Join Date: Apr 2012
Posts: 4
Thanked: 3 Times
Thanked: 4 Others
is Offline
05-12-2012 #36
coolcat Some TIPS
Join Date: Jan 2010 I found it was lot easier to install on old ide 120gb hard drive
Posts: 34
Thanked: 24 Times
Thanked: 3 Others with windows 64bit run the sever and client on the same drive
i split the drive up with this tool
Links:
You are unable to view this content until you register.
-------------------
when installing (on the video at 11.08 ) click on - Set up Team Startup Projects -
will make your life lot easier if you do so.
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
11. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
see the bottom page of
file:///C:/Program%20Files/Dassault%20Systemes/B212doc/English/DSDoc.htm
------------------
its not the full book ..But it does get you started and with caita v2012 plz do take look at the link will help you lot if you new to catia
Links:
You are unable to view this content until you register.
is Offline
05-12-2012 #37
Peanuit I have tried my best to install but have got nowhere at all. I tried installing virtual box with winxp64 and stand alone with
win7 but no luck. Its not that i cannot install it which is frustrating its not knowing why. I cannot get past installing in ENOVIADB/ Filerepository. It comes up with errors which refer to a code or something ,didnt grab any screens.
I am doing something fundamentally stupid. Do I need to have a home network set up? I think I'll give it one more go on Win 8 again.
Join Date: Jul 2011 Cheers Guys
Posts: 29
Thanked: 4 Times
Thanked: 1 Others
is Offline
05-12-2012 #38
smokeyser There's no need to split up the drive to match what's on the video if you don't want to. Ideally everything should go on it's own hard drive for performance and reliability reasons, but making a few folders under c: will work just fine.
@Peanuit: Don't give up! I don't think the OS that you use matters much. Enovia is mostly just a bunch of stuff being loaded into a database. If you're still stuck, make sure you're following the video exactly when setting up the sql server, and that you're giving
Join Date: Apr 2012 enovia the right password to log into the database.
Posts: 4
Thanked: 3 Times
Thanked: 4 Others
is Offline
05-12-2012 #39
Cadmium77 Keep trying...we've been frying our brains over this shit for months..you'll get there.
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
Join Date: Oct 2009
Posts: 2,768
Thanked: 1,038 Times
Thanked: 2,120 Others
is Online
05-13-2012 #40
Peanuit Thanks guys, Fried brain here too for sure.
Yep, its definitely a SQL problem. My last try was win7 64 no virtualbox, just realized I was using SQL server 2012! and reading a previous post this version isn't supported, so just downloading 2008 r2. Tally-ho
Join Date: Jul 2011
Posts: 29
Thanked: 4 Times
Thanked: 1 Others
is Offline
05-13-2012 #41
coolcat you want 1 windows 64bit with sp2
Join Date: Jan 2010
Posts: 34 clean install on ( old drive ) round 120gb will do fine
Thanked: 24 Times
Thanked: 3 Others
you do NOT NEAD "virtualbox" repeat you DO NOT NEED it at all.
once install windows xp 64bit
Turn off automatic updates soon as you can.
Install your GFX card drivers (lan, sound, etc )
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
12. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
( see my last post how split the drive up into 5 parts you want
what software todo it with )
(
local eg c: sould be 30 gb
D: E: F: G: to be round 20 gbs
)
---
you will then need FireFox
download from here
Links:
You are unable to view this content until you register.
install firefox
after that install Java
Links:
You are unable to view this content until you register.
plz make sure you have install theses before you install the rest
----
download 4 files from this link's
( 6 rars )
Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register.
Links:
You are unable to view this content until you register.
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
13. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
( and install in this order )
1. install DotNetFx35Client.exe
2. install WindowsServer2003-KB942288-v4-x64.exe
3. install WindowsServer2003.WindowsXP-KB926139-v2-x64-ENU.exe
4. install SQLEXPRWT_x64_ENU.exe
----
i have add the files because lot's different version of the sever2008 you got have the right one and dotnetfx35clint. ect
so add them so you got all the files you need and the wright ones
---
1. then start the catia Server install
then after catia sever is install
2. install the Client 64 bit
( I know maybe stating the obvious , just trying to help )
---
is Offline
The Following 2 Users Say Thanks Karimousa, Komplkx
05-13-2012 #42
smokeyser Just wanted to point out that it should work without starting with a fresh install, and partitioning a single drive isn't needed. The point of separate drives is to boost performance since Databases work best on their own drive when they're busy. If you only have a
single HD to work with and already have one big partition on it, just tossing it in folders under c: will work. Otherwise, all good advice.
Join Date: Apr 2012 Here's a short explanation of the install, in case anyone is still stuck and doesn't know why:
Posts: 4
Thanked: 3 Times 1. First you install sql server 2008 and set up a db for enovia to store your data in and a user (sa) to access it. Don't forget the password that you set! Otherwise there should be no issues with this step as long as you're following the video.
Thanked: 4 Others
2. Install enovia, giving it the username and password from the first step. Then create user accounts for everyone who will be using catia, assign licenses to them, and create a project for your "files" to be saved to. Make sure you set the user as project leader. Most
of what's happening during this process is simply loading enovia's data into the database. If it fails, you most likely either used the wrong version of ms sql server, mistyped the username/password, or possibly forgot to set the collation to a windows type. Not sure
about that last part, but the video suggests it and collation issues can be hard to pin down later. Latin1_general is a good choice on a us/english machine. Note that when assigning licenses, don't just select all of them. You'll be flooded with over 200 warnings about
licenses that weren't supposed to be assigned when you start up catia!
3. Install catia pretty much anywhere. The important part here is that you get the license file created in the right place. When you log in the first time, you'll be able to tell it the enovia server's hostname/ip (or localhost if it's on the same machine). Your password will
be the same as your username until you log into the enovia web portal and change it. Contrary to what your instincts will likely tell you here, logging in as administrator is a bad idea. You won't be able to save your project. Choose the project leader context. If you
have issues with this step, it'll most likely be a mistake in how you set up the user/project in enovia or a mistake with the license file.
4. Spend the next 5 years learning to use it properly. If you have issues with this step, that's perfectly normal. Keep at it and good luck!
is Offline
The Following 2 Users Say Thanks Cadmium77, Karimousa
05-13-2012 #43
Cadmium77 Links:
You are unable to view this content until you register.
Note; the version of SQL Server 2008 used in the video is
SQLEXPRWT_x64_ENU
or in other words this one;
Join Date: Oct 2009
Posts: 2,768 Links:
Thanked: 1,038 Times You are unable to view this content until you register.
Thanked: 2,120 Others
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
14. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
is Online
The Following User Says Thanks Kirua
05-15-2012 #44
Kirua I can't even install the .NET framework 3.5 sp1
When I click on the .exe It appears to extract, then nothing happens.
Join Date: May 2012
Posts: 4 I have Windows 7 64-bit sp1 Home Premium.
Thanked: 0 Times
Thanked: 5 Others
Any help would be appriciated
is Offline
05-15-2012 #45
Cadmium77 Links:
You are unable to view this content until you register.
Windows 7 already has .net4 installed. no need for 3.5 just skip ahead on the video to 3:11 for the installation of SQL Server 2008..
__________________
VISIT THE HOUDINI PYTHON STUDENT'S BLOG
If you have something you'd like to discuss write an article, link to some pictures or videos and personal message it all to me. I'll be glad to put it up on the Blog.
http://houdini-pythonstudents.blogspot.com
Join Date: Oct 2009
Posts: 2,768
Thanked: 1,038 Times
Thanked: 2,120 Others
is Online
The Following User Says Thanks Kirua
05-15-2012 #46
Peanuit Up and running, Guys full propogation, export etc thanks for all your help. Installed on Win 8 preview 64 all on one machine. First time used Win 8 and apart from the interface i reckon there is some very good code in there, i mean in certain respects Win 7 64 has a
certain canine aspect to it compared to 8. Something i noticed which doesnt happen all the time 'Tomcat' was taking up 36% CPU of quad proc! I disabled the service and carried on.
Join Date: Jul 2011
Posts: 29
Thanked: 4 Times
Thanked: 1 Others
is Offline
05-15-2012 #47
Kirua After I ran the SQL server 2008, a program compatibility Issue poped up.
"After SQL Server Setup completes, you must apply SQL Server 2008 Service Pack (SP1) or a later service pack before you run SQL Server 2008 on this version of Windows.
Join Date: May 2012
Posts: 4
Thanked: 0 Times This is the link where I downloaded the SQL Server pack
Thanked: 5 Others
Links:
You are unable to view this content until you register.
If I continue, will I get stuck later on because of this compatibility issue?
Sorry for so much newbie questions
Really appreciate the help!
is Offline
05-15-2012 #48
smokeyser It might work. Just keep in mind that you're using an older version of sql server than what's been suggested. If you run into weird enovia errors then you'll know that you need to upgrade to sql server 2008 r2.
Join Date: Apr 2012
Posts: 4
Thanked: 3 Times
Thanked: 4 Others
is Offline
The Following User Says Thanks Kirua
05-15-2012 #49
Kirua Does it matter what edition I use, Express/Enterprise?
Isn't Enterprise ... not free?
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]
15. DS CATIA V6 R2012x 32/64bit Full Multilanguage Setup & crack (by SSQ) - CGPersia Forums
Join Date: May 2012
Posts: 4 I am currently downloading the R2 Express edition, cross fingers and hope it'll work >.
Thanked: 0 Times
Thanked: 5 Others Links:
You are unable to view this content until you register.
is Offline
05-16-2012 #50
g.s.alex Hi CADmium, I have installed the CATIA v6R2012X and Enovia, but meet problem running CATIA:
When I start CATIA, connect to the Enovia server, the CATIA login window freezed. After about one hour, the main window showed. Then any action in the window will take a very long time ti get response.
Join Date: Dec 2011
Posts: 1 What is the problem with this software? CATIA V5R21 works prefectly in my computer, but V6 is toooo much slow to use.
Thanked: 0 Times
Thanked: 0 Others
is Offline
Page 1 of 2 1 2 >
« 3D Object Converter 4.80 PatchBC-Crew | Agisoft Photoscan Pro 0.9 1542 PRE X86 by ATHENA »
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off
Forum Rules
CGPersia Forums - Archive - Top
http://forum.cgpersia.com/f13/ds-catia-v6-r2012x-32-64bit-full-multilanguage-setup-crack-ssq-52422/[8/29/2012 3:26:54 PM]