Diez
•Download as PPTX, PDF•
0 likes•446 views
The document discusses the impacts of new vehicle technology, noting that it can help reduce pollution when properly used and maintained, but can cause issues like decreased fuel economy and downtime if not properly handled. It emphasizes the need to educate drivers, dispatchers, and technicians on monitoring vehicle systems and not ignoring issues. Charts show average vehicle age has risen nearly a year over the last decade, while mileage patterns and residual values have remained consistent with previous technology. Each new generation of EPA compliant engines has improved but also increased maintenance costs and downtime due to greater complexity challenging drivers and technicians.
Report
Share
Report
Share
Recommended
Stop Idling. Start Saving! Idle Reduction Webinar - WI State Energy Office Pr...
Stop Idling. Start Saving! Idle Reduction Webinar - WI State Energy Office Pr...Wisconsin Clean Cities
Jean Beckwith, Wisconsin State Energy Office, gave an overview of their Diesel Truck Idling Reduction Grant Program!motograde
Ace Enablers LLP offers motograde, a comprehensive solution for induction motor management in industries. Motograde includes auditing the motor system for reliability and efficiency, proposing engineered motor selection and retrofit options, efficiency testing, providing variable frequency drives, and training. They conduct on-site assessments, inventory motors, analyze load profiles, and provide financial analyses of retrofit options. Their goal is to enhance motor and system efficiency through replacement, upgrades, or condition monitoring. They also handle safe disposal of old motors through licensed recyclers.
Industrial manufacturing OEMs face financial and operational challenges in th...
Industrial manufacturing OEMs need an effective asset optimization program to minimize financial and operational challenges.
Group 8 OIM
The document discusses case studies on the implementation impact of information systems at three companies:
1. ABC Bank South Africa implemented a new system to streamline procurement processes and enhance its ability to compete. However, turnaround times were affected and unplanned support costs diluted the short term benefits.
2. Shell South Africa consolidated its systems to ensure all countries used the same system. Some teething issues related to end user proficiency were still being experienced.
3. Lafarge Cement Zambia implemented a new system to improve sales and accounts integration for better revenue accounting and information extraction. However, some limitations emerged a few years later.
MTC16 Presentation - eHT
The document discusses membrane procurement and implementation. It outlines the roles of owners, engineers, and membrane suppliers in the procurement process. It describes historical approaches like design-bid-build and newer approaches like pre-purchase and pre-select. It lists 5 key questions to ask, such as who will pay and how the project will be built. It also discusses avoiding pitfalls like unclear contracts and defining performance criteria. The presentation aims to provide guidance on successfully procuring membrane systems.
Hames
Regulations and costs are changing equipment lifecycles and the used truck market. Stricter emissions standards pre-2010 increased costs and decreased reliability and fuel economy, while post-2010 improvements have led to better fuel economy and improving reliability of emissions technologies. For OEMs, aligning fuel economy goals with emissions regulations creates incentives for fuel efficiency. Fleets now prioritize total cost of ownership, with operating costs and fuel economy as top factors in purchase decisions. The used market also reflects these changes, as resale value is less important and better fuel economy enables shorter trade cycles.
Improving transport operations
This document discusses electric vehicles for industrial use at Singapore Refining Company. It provides details on Columbia Industrial Work Vehicles, including specifications like a 65km range on a single charge, 1.1 tonne capacity, and 30kmh top speed. It also outlines a purchase model and estimated maintenance costs of $1180 per year for services, battery replacement every 3 years, and new tires every 2 years. Finally, it presents a 4-year leasing model that includes all maintenance and a new fleet option in the 4th year for $12,686 initially and $9,996 for years 2-3.
Anti Idling Initiatives at Kraft Foods
Presented by Matt Schultz, Private Fleet Manager, Kraft Foods, at the Wisconsin Clean Cities Idle Reduction Workshop on August 21, 2012.
Recommended
Stop Idling. Start Saving! Idle Reduction Webinar - WI State Energy Office Pr...
Stop Idling. Start Saving! Idle Reduction Webinar - WI State Energy Office Pr...Wisconsin Clean Cities
Jean Beckwith, Wisconsin State Energy Office, gave an overview of their Diesel Truck Idling Reduction Grant Program!motograde
Ace Enablers LLP offers motograde, a comprehensive solution for induction motor management in industries. Motograde includes auditing the motor system for reliability and efficiency, proposing engineered motor selection and retrofit options, efficiency testing, providing variable frequency drives, and training. They conduct on-site assessments, inventory motors, analyze load profiles, and provide financial analyses of retrofit options. Their goal is to enhance motor and system efficiency through replacement, upgrades, or condition monitoring. They also handle safe disposal of old motors through licensed recyclers.
Industrial manufacturing OEMs face financial and operational challenges in th...
Industrial manufacturing OEMs need an effective asset optimization program to minimize financial and operational challenges.
Group 8 OIM
The document discusses case studies on the implementation impact of information systems at three companies:
1. ABC Bank South Africa implemented a new system to streamline procurement processes and enhance its ability to compete. However, turnaround times were affected and unplanned support costs diluted the short term benefits.
2. Shell South Africa consolidated its systems to ensure all countries used the same system. Some teething issues related to end user proficiency were still being experienced.
3. Lafarge Cement Zambia implemented a new system to improve sales and accounts integration for better revenue accounting and information extraction. However, some limitations emerged a few years later.
MTC16 Presentation - eHT
The document discusses membrane procurement and implementation. It outlines the roles of owners, engineers, and membrane suppliers in the procurement process. It describes historical approaches like design-bid-build and newer approaches like pre-purchase and pre-select. It lists 5 key questions to ask, such as who will pay and how the project will be built. It also discusses avoiding pitfalls like unclear contracts and defining performance criteria. The presentation aims to provide guidance on successfully procuring membrane systems.
Hames
Regulations and costs are changing equipment lifecycles and the used truck market. Stricter emissions standards pre-2010 increased costs and decreased reliability and fuel economy, while post-2010 improvements have led to better fuel economy and improving reliability of emissions technologies. For OEMs, aligning fuel economy goals with emissions regulations creates incentives for fuel efficiency. Fleets now prioritize total cost of ownership, with operating costs and fuel economy as top factors in purchase decisions. The used market also reflects these changes, as resale value is less important and better fuel economy enables shorter trade cycles.
Improving transport operations
This document discusses electric vehicles for industrial use at Singapore Refining Company. It provides details on Columbia Industrial Work Vehicles, including specifications like a 65km range on a single charge, 1.1 tonne capacity, and 30kmh top speed. It also outlines a purchase model and estimated maintenance costs of $1180 per year for services, battery replacement every 3 years, and new tires every 2 years. Finally, it presents a 4-year leasing model that includes all maintenance and a new fleet option in the 4th year for $12,686 initially and $9,996 for years 2-3.
Anti Idling Initiatives at Kraft Foods
Presented by Matt Schultz, Private Fleet Manager, Kraft Foods, at the Wisconsin Clean Cities Idle Reduction Workshop on August 21, 2012.
Toronto future directions - 2015
The document summarizes a presentation given by Lubrizol Corporation on industry trends related to efficiency and implications for lubricants. Key points include: regulations are driving improvements in efficiency to reduce emissions; testing methods need to evolve to measure efficiency gains from lubricants; lubricants must balance the demands of thinner viscosities to reduce friction while still protecting engines under more demanding conditions.
Aneesh (Senior Technician - Team Leader)
Aneesh Sukumaran has over 7 years of experience as an automotive senior technician and team leader in the UAE. He has expertise repairing and maintaining a wide range of vehicle makes, including Toyota, Lexus, Mercedes, BMW, Porsche, and more. He is skilled at inspection, diagnosis, repair, and preventative maintenance. He received a Certificate of Appreciation from Al-Futtaim for distinguished performance as a Toyota technician in 2013.
2014 cvoc show_200_menig_slideshare_post
The document discusses various technologies that can improve trucking operations and driver performance. Paul Menig leads technology development efforts at Tech-I-M, LLC and various industry councils. Ellen Voie discusses how technologies like simulators, cameras, devices and systems can transform trucking. Gerard DeVito leads Eaton's development of automated transmissions. Brent Nussbaum discusses how Nussbaum Transportation Services uses people and technologies like on-board computers and fuel-saving devices to enhance performance. Clay Merches and JR Schugel discuss J&R Schugel's safety programs and use of video to train drivers. The document outlines various fuel-saving technologies and strategies used in fleets.
Alan Nolan - SIMI - Irish Motor Industry Perspective
This document discusses efforts to reduce CO2 emissions from vehicles in Ireland. It makes three key points:
1) Three parties need to work together - the motor industry developing new technologies, government improving infrastructure and policies, and individuals making sustainable transportation choices.
2) The motor industry has significantly reduced vehicle emissions through 50 new technologies introduced in Europe over the last decade. However, emissions are now largely driven by older vehicles and traffic issues.
3) A behavioral approach is needed in addition to technologies and policies to effectively reduce emissions, as environmental decisions are influenced by multiple contextual factors beyond simply costs. Public engagement is important to build on existing concern for the environment.
Majdi Allabadi Resume updated
This document provides a summary of an experienced automotive mechanical engineer with over 18 years of experience in the automotive industry. He has held service manager positions at several automotive dealerships in Saudi Arabia and Jordan. His experience includes managing service departments, developing strategies to increase service business, ensuring customer satisfaction, managing technicians and advisors, and achieving budget targets. He has an engineering degree from the University of Jordan and has received extensive training from Toyota, GM, and other automotive manufacturers.
Roy sayre 01.2016
Roy Sayre has over 20 years of experience in maintenance management and supervision in fast-paced manufacturing environments. He has managed maintenance teams for startup plants and led training programs. Some of his achievements include maintaining high equipment uptime percentages, implementing system upgrades that increased throughput, and consistently winning awards for maintaining 5S standards.
Engine Dyno UTeM intro.pptx
engine dyno development in utem
from single cylinder to multi cylinder engine performance test
Capable of testing engine on test bed and analyze the engine mapping which include Power (kW/ Hp / Bhp) , Torque (Nm), Fuel Consumption (BSFC) Emission (NOx, CO, CO2, HC) engine cylinder pressure and temperature mapping
Maintenance Costs Reduction Strategy Presentation
The document discusses strategies to reduce R&M and power costs in the region by 23%. It aims to reduce breakdown rates through quality spares and machine maintenance. It also aims to increase accountability and skills training. Charts show the age distribution of equipment and breakdown of past and targeted costs. Strategies include replacing aging equipment, focusing on spares quality, scheduled maintenance, and power factor management to reduce costs. The overall goal is to lower R&M costs per hectare and cubic meter for plantations, harvesting, and the sawmill operations.
EVAA Presentation Winter 2012
EMD provides simple and low-cost electric and hybrid electric propulsion systems for commercial fleets to help reduce fuel costs and emissions. Their emDrive product can be installed in medium and heavy-duty vehicles to provide 10-30% reduction in fuel usage and costs. It is a straightforward system to install within 20 man-hours without affecting vehicle warranties. EMD has demonstration fleets of hybrid refuse trucks, school and transit buses, and other vehicles to showcase emDrive and its benefits.
Panel connected fleet
The document discusses Paul Menig's career leading technology development teams in various industries including medical equipment, aerospace, industrial automation, and trucking. It notes that he currently leads Future Truck efforts at Tech-I-M and is involved in activities regarding future fuel economy regulations and truck partnerships.
The next section discusses various technologies being used or considered for use in trucking, including driving simulators, onboard cameras, handheld devices, fleet management systems, collision mitigation radar, and automated transmissions.
The final section introduces Gerard DeVito, who assumed responsibility for Eaton's global heavy duty automated transmission development. It notes his 28 years of experience at Eaton in various engineering, planning, strategy, and
L.V.SUDHAKAR_CV_Jan16 (1)
L.V. Sudhakar has over 20 years of experience as an automotive technician and technical leader. He has worked for several automobile dealers in roles of increasing responsibility, maintaining vehicles and resolving customer issues. Sudhakar holds a diploma in automobile management and a bachelor's degree in the same, and has received additional technical training from various automakers. He is proficient in English and his native Telugu, and has expertise with Microsoft Office and AutoCAD.
Platform & Application Modernization
Insights to why modernization is important, types of modernization, various modernization factors and proposed JKT architectural solution
Clean Engines Inc Presentation
This document discusses Clean Engines retrofit kits that can reduce emissions from 2-stroke motorcycles and tricycles by up to 90% while also increasing fuel efficiency by 40%. There are over 100 million 2-stroke vehicles in Asia alone, which creates air pollution equivalent to 5 billion cars. The retrofit kits use fuel injection or conversion to cleaner burning gaseous fuels. With $6 million in funding, the company estimates it could impact over 1 million drivers and their families, reduce carbon emissions by 1.6 million tonnes, and save over 132 million gallons of fuel over 5 years.
CEI presentation
This document discusses Clean Engines' retrofit kits that can reduce emissions from 2-stroke motorcycles and tricycles by up to 90% while also increasing fuel efficiency by 40%. There are over 100 million 2-stroke vehicles in Asia alone, equivalent to 5 billion cars in terms of pollution. Clean Engines' retrofit kits offer an affordable way to loan the technology to drivers with quick repayment periods, allowing drivers to double their income. A $6 million investment over 5 years could deliver carbon credit potential of $122 million by preventing 1.6 million tonnes of carbon from being released while improving air quality for 100 million people and saving 132 million gallons of fuel.
D.greenwood, wmg future of low carbon vehicles
1) There are many drivers to develop more efficient transportation technologies, including reducing carbon emissions, improving energy security and consumer demand.
2) Pathways to reduce emissions include improving powertrain technologies like hybridization and electrification, reducing vehicle mass, and managing transportation demand.
3) Most major vehicle markets now regulate CO2 emissions and are gradually converging on more stringent targets over time. OEMs must manage fleet-wide CO2 targets, which is driving innovation in powertrain technologies.
Una introducción a HDM-4
Dr. Eric E. Stannard, CEO of HDMGlobal, gave a presentation on the use and features of HDM-4, a decision support tool for road investment choices. HDM-4 has been sold to over 110 countries and is used by various government and private organizations. It predicts road network performance based on factors like traffic, road type, and maintenance. HDM-4 allows users to analyze strategies, maintenance programs, and project costs to optimize total transport costs. The software requires local calibration of models to provide accurate outputs for strategic planning, project evaluation, and research studies.
Ace065 rinkevich 2011_o
This presentation provides an overview of a project funded by the Department of Energy to develop an advanced gasoline turbocharged direct injection engine. The project is a collaboration between Ford Motor Company and Michigan Technological University, with the goal of demonstrating a 25% fuel economy improvement in a mid-sized sedan while meeting emissions requirements. The presentation summarizes accomplishments to date including engine modeling, single cylinder engine development, and catalyst testing, and outlines the future work planned over the course of the project.
Bussines Plan for Car Manufacturing
The document summarizes a business model for an automotive company called Voiture in India. It outlines Voiture's objectives to provide high quality, low cost vehicles to customers. It describes Voiture's product range including hatchbacks and sedans. The document also discusses Voiture's operations strategy of just-in-time manufacturing and site selection along the Mumbai-Pune highway. It concludes by noting India's growing automotive sector and population to support consumer demand.
Underwriting & loss control
The document discusses underwriting and loss control considerations for combined cycle power plants. It provides an introduction to combined cycle plants, noting their increased use, advantages, and working cycles. Key underwriting factors include prototype models carrying higher risk, operating conditions, and risk management practices. Losses are often from design faults, human errors, or operational issues. Loss prevention focuses on risk-based maintenance, proactive schedules, and diagnostic monitoring. Underwriters must take a careful approach to new models and apply high deductibles for testing given the risks.
NaviFleet Fleet Management for Heavy Duty Applications
The document describes NaviFleet, a fleet management system. It provides location tracking of vehicles and drivers, and allows managers to monitor fuel usage, engine hours, driving data and more. The system includes devices that track this data and a platform for managers to access reports and send messages. It is intended to help customers improve efficiency and reduce costs by optimizing vehicle usage and driver behavior.
What's ahead in 2015 d. broughton
The document summarizes Donald Broughton's presentation at the CCJ Spring Symposium on May 20, 2015. Some of the key points discussed include:
- Fracking has led to plentiful and low-priced oil and natural gas supplies that can potentially last a long time.
- Trucking volumes have been growing but are showing signs of decelerating, especially for long-haul freight. Intermodal volumes have also decelerated due to cheaper diesel and economic factors.
- Railroads face issues like falling volumes of coal and exports due to cheaper natural gas and a strong dollar. Intermodal cargo is shifting back to trucks as diesel prices drop.
- Broughton predicts the driver
Ward brochure voluntary-guide
This document provides voluntary guidelines for good business relations between shippers, receivers, carriers, and drivers in the transportation industry. It outlines responsibilities and practices that each group should follow to expedite cargo movement safely and efficiently. Shippers and receivers are responsible for timely loading and unloading of freight, while carriers and drivers must meet service commitments and treat personnel with courtesy. All parties should strive for honest, fair, and open communication.
More Related Content
Similar to Diez
Toronto future directions - 2015
The document summarizes a presentation given by Lubrizol Corporation on industry trends related to efficiency and implications for lubricants. Key points include: regulations are driving improvements in efficiency to reduce emissions; testing methods need to evolve to measure efficiency gains from lubricants; lubricants must balance the demands of thinner viscosities to reduce friction while still protecting engines under more demanding conditions.
Aneesh (Senior Technician - Team Leader)
Aneesh Sukumaran has over 7 years of experience as an automotive senior technician and team leader in the UAE. He has expertise repairing and maintaining a wide range of vehicle makes, including Toyota, Lexus, Mercedes, BMW, Porsche, and more. He is skilled at inspection, diagnosis, repair, and preventative maintenance. He received a Certificate of Appreciation from Al-Futtaim for distinguished performance as a Toyota technician in 2013.
2014 cvoc show_200_menig_slideshare_post
The document discusses various technologies that can improve trucking operations and driver performance. Paul Menig leads technology development efforts at Tech-I-M, LLC and various industry councils. Ellen Voie discusses how technologies like simulators, cameras, devices and systems can transform trucking. Gerard DeVito leads Eaton's development of automated transmissions. Brent Nussbaum discusses how Nussbaum Transportation Services uses people and technologies like on-board computers and fuel-saving devices to enhance performance. Clay Merches and JR Schugel discuss J&R Schugel's safety programs and use of video to train drivers. The document outlines various fuel-saving technologies and strategies used in fleets.
Alan Nolan - SIMI - Irish Motor Industry Perspective
This document discusses efforts to reduce CO2 emissions from vehicles in Ireland. It makes three key points:
1) Three parties need to work together - the motor industry developing new technologies, government improving infrastructure and policies, and individuals making sustainable transportation choices.
2) The motor industry has significantly reduced vehicle emissions through 50 new technologies introduced in Europe over the last decade. However, emissions are now largely driven by older vehicles and traffic issues.
3) A behavioral approach is needed in addition to technologies and policies to effectively reduce emissions, as environmental decisions are influenced by multiple contextual factors beyond simply costs. Public engagement is important to build on existing concern for the environment.
Majdi Allabadi Resume updated
This document provides a summary of an experienced automotive mechanical engineer with over 18 years of experience in the automotive industry. He has held service manager positions at several automotive dealerships in Saudi Arabia and Jordan. His experience includes managing service departments, developing strategies to increase service business, ensuring customer satisfaction, managing technicians and advisors, and achieving budget targets. He has an engineering degree from the University of Jordan and has received extensive training from Toyota, GM, and other automotive manufacturers.
Roy sayre 01.2016
Roy Sayre has over 20 years of experience in maintenance management and supervision in fast-paced manufacturing environments. He has managed maintenance teams for startup plants and led training programs. Some of his achievements include maintaining high equipment uptime percentages, implementing system upgrades that increased throughput, and consistently winning awards for maintaining 5S standards.
Engine Dyno UTeM intro.pptx
engine dyno development in utem
from single cylinder to multi cylinder engine performance test
Capable of testing engine on test bed and analyze the engine mapping which include Power (kW/ Hp / Bhp) , Torque (Nm), Fuel Consumption (BSFC) Emission (NOx, CO, CO2, HC) engine cylinder pressure and temperature mapping
Maintenance Costs Reduction Strategy Presentation
The document discusses strategies to reduce R&M and power costs in the region by 23%. It aims to reduce breakdown rates through quality spares and machine maintenance. It also aims to increase accountability and skills training. Charts show the age distribution of equipment and breakdown of past and targeted costs. Strategies include replacing aging equipment, focusing on spares quality, scheduled maintenance, and power factor management to reduce costs. The overall goal is to lower R&M costs per hectare and cubic meter for plantations, harvesting, and the sawmill operations.
EVAA Presentation Winter 2012
EMD provides simple and low-cost electric and hybrid electric propulsion systems for commercial fleets to help reduce fuel costs and emissions. Their emDrive product can be installed in medium and heavy-duty vehicles to provide 10-30% reduction in fuel usage and costs. It is a straightforward system to install within 20 man-hours without affecting vehicle warranties. EMD has demonstration fleets of hybrid refuse trucks, school and transit buses, and other vehicles to showcase emDrive and its benefits.
Panel connected fleet
The document discusses Paul Menig's career leading technology development teams in various industries including medical equipment, aerospace, industrial automation, and trucking. It notes that he currently leads Future Truck efforts at Tech-I-M and is involved in activities regarding future fuel economy regulations and truck partnerships.
The next section discusses various technologies being used or considered for use in trucking, including driving simulators, onboard cameras, handheld devices, fleet management systems, collision mitigation radar, and automated transmissions.
The final section introduces Gerard DeVito, who assumed responsibility for Eaton's global heavy duty automated transmission development. It notes his 28 years of experience at Eaton in various engineering, planning, strategy, and
L.V.SUDHAKAR_CV_Jan16 (1)
L.V. Sudhakar has over 20 years of experience as an automotive technician and technical leader. He has worked for several automobile dealers in roles of increasing responsibility, maintaining vehicles and resolving customer issues. Sudhakar holds a diploma in automobile management and a bachelor's degree in the same, and has received additional technical training from various automakers. He is proficient in English and his native Telugu, and has expertise with Microsoft Office and AutoCAD.
Platform & Application Modernization
Insights to why modernization is important, types of modernization, various modernization factors and proposed JKT architectural solution
Clean Engines Inc Presentation
This document discusses Clean Engines retrofit kits that can reduce emissions from 2-stroke motorcycles and tricycles by up to 90% while also increasing fuel efficiency by 40%. There are over 100 million 2-stroke vehicles in Asia alone, which creates air pollution equivalent to 5 billion cars. The retrofit kits use fuel injection or conversion to cleaner burning gaseous fuels. With $6 million in funding, the company estimates it could impact over 1 million drivers and their families, reduce carbon emissions by 1.6 million tonnes, and save over 132 million gallons of fuel over 5 years.
CEI presentation
This document discusses Clean Engines' retrofit kits that can reduce emissions from 2-stroke motorcycles and tricycles by up to 90% while also increasing fuel efficiency by 40%. There are over 100 million 2-stroke vehicles in Asia alone, equivalent to 5 billion cars in terms of pollution. Clean Engines' retrofit kits offer an affordable way to loan the technology to drivers with quick repayment periods, allowing drivers to double their income. A $6 million investment over 5 years could deliver carbon credit potential of $122 million by preventing 1.6 million tonnes of carbon from being released while improving air quality for 100 million people and saving 132 million gallons of fuel.
D.greenwood, wmg future of low carbon vehicles
1) There are many drivers to develop more efficient transportation technologies, including reducing carbon emissions, improving energy security and consumer demand.
2) Pathways to reduce emissions include improving powertrain technologies like hybridization and electrification, reducing vehicle mass, and managing transportation demand.
3) Most major vehicle markets now regulate CO2 emissions and are gradually converging on more stringent targets over time. OEMs must manage fleet-wide CO2 targets, which is driving innovation in powertrain technologies.
Una introducción a HDM-4
Dr. Eric E. Stannard, CEO of HDMGlobal, gave a presentation on the use and features of HDM-4, a decision support tool for road investment choices. HDM-4 has been sold to over 110 countries and is used by various government and private organizations. It predicts road network performance based on factors like traffic, road type, and maintenance. HDM-4 allows users to analyze strategies, maintenance programs, and project costs to optimize total transport costs. The software requires local calibration of models to provide accurate outputs for strategic planning, project evaluation, and research studies.
Ace065 rinkevich 2011_o
This presentation provides an overview of a project funded by the Department of Energy to develop an advanced gasoline turbocharged direct injection engine. The project is a collaboration between Ford Motor Company and Michigan Technological University, with the goal of demonstrating a 25% fuel economy improvement in a mid-sized sedan while meeting emissions requirements. The presentation summarizes accomplishments to date including engine modeling, single cylinder engine development, and catalyst testing, and outlines the future work planned over the course of the project.
Bussines Plan for Car Manufacturing
The document summarizes a business model for an automotive company called Voiture in India. It outlines Voiture's objectives to provide high quality, low cost vehicles to customers. It describes Voiture's product range including hatchbacks and sedans. The document also discusses Voiture's operations strategy of just-in-time manufacturing and site selection along the Mumbai-Pune highway. It concludes by noting India's growing automotive sector and population to support consumer demand.
Underwriting & loss control
The document discusses underwriting and loss control considerations for combined cycle power plants. It provides an introduction to combined cycle plants, noting their increased use, advantages, and working cycles. Key underwriting factors include prototype models carrying higher risk, operating conditions, and risk management practices. Losses are often from design faults, human errors, or operational issues. Loss prevention focuses on risk-based maintenance, proactive schedules, and diagnostic monitoring. Underwriters must take a careful approach to new models and apply high deductibles for testing given the risks.
NaviFleet Fleet Management for Heavy Duty Applications
The document describes NaviFleet, a fleet management system. It provides location tracking of vehicles and drivers, and allows managers to monitor fuel usage, engine hours, driving data and more. The system includes devices that track this data and a platform for managers to access reports and send messages. It is intended to help customers improve efficiency and reduce costs by optimizing vehicle usage and driver behavior.
Similar to Diez (20)
Alan Nolan - SIMI - Irish Motor Industry Perspective
Alan Nolan - SIMI - Irish Motor Industry Perspective
NaviFleet Fleet Management for Heavy Duty Applications
NaviFleet Fleet Management for Heavy Duty Applications
More from Aaron Heine
What's ahead in 2015 d. broughton
The document summarizes Donald Broughton's presentation at the CCJ Spring Symposium on May 20, 2015. Some of the key points discussed include:
- Fracking has led to plentiful and low-priced oil and natural gas supplies that can potentially last a long time.
- Trucking volumes have been growing but are showing signs of decelerating, especially for long-haul freight. Intermodal volumes have also decelerated due to cheaper diesel and economic factors.
- Railroads face issues like falling volumes of coal and exports due to cheaper natural gas and a strong dollar. Intermodal cargo is shifting back to trucks as diesel prices drop.
- Broughton predicts the driver
Ward brochure voluntary-guide
This document provides voluntary guidelines for good business relations between shippers, receivers, carriers, and drivers in the transportation industry. It outlines responsibilities and practices that each group should follow to expedite cargo movement safely and efficiently. Shippers and receivers are responsible for timely loading and unloading of freight, while carriers and drivers must meet service commitments and treat personnel with courtesy. All parties should strive for honest, fair, and open communication.
Technology breakout m leapley
Marie Leapley from Celadon discussed their customer scoring system called OE2 which analyzes factors like origin and destination capacity, operating ratio, and modes of transit to determine which customers provide the most profitable freight for their network. The scoring system has led to improved results including a 6% increase in year-over-year rates, a 2% decrease in operating ratio, a 60% decrease in layovers, and over 5.6 million fewer weekly miles. Leapley outlined ongoing enhancements to the system such as pre-scoring electronic data interchange tenders and improved connectivity between scoring programs.
Point counterpoint van steenburg ccj spring 2015
The document provides an overview of FMCSA's regulatory update and safety initiatives presented by Jack Van Steenburg at a commercial carrier symposium. It discusses (1) FMCSA's mission of prioritizing safety and preventing crashes involving commercial vehicles, (2) data showing that while commercial vehicles represent a small percentage of vehicles, they are involved in a large percentage of crashes and fatalities, and (3) FMCSA's CSA program and its safety benefits in identifying high-risk carriers for intervention and reducing roadside violations.
Point counterpoint heller ccj spring 2015
This document summarizes discussions from a transportation conference on several key regulatory issues facing the trucking industry. The top issues included hours of service rules, the driver shortage, the CSA program, and electronic logging devices. There was discussion on proposed changes to entry-level driver training, the safety fitness determination program, using hair testing for drug screening, and establishing a drug and alcohol clearinghouse database. Concerns were also raised about the reliability of CSA scoring and the need to level the playing field with a final ELD rule and limit truck speeds.
Equipment breakout d. stuart
This document contains information from a presentation given by Darry Stuart, President of DWS Fleet Management, about issues facing maintenance management in the trucking industry. It discusses common reasons why maintenance managers and technicians leave their jobs or don't stay long term, such as problems with senior management, unrealistic expectations, lack of respect and appreciation. It also provides tips on how companies can better retain maintenance staff and help them advance their careers.
Adopting advanced safety technologies
The document discusses advanced safety technologies being adopted by transportation companies. It provides timelines of technologies adopted from 2007-2015 and describes features of collision avoidance systems, electronic onboard recorders, video event recording, and other technologies. Speakers at a panel discussion on adopting advanced safety technologies include representatives from Saia LTL Freight, Cargo Transporters, and PITT OHIO who discuss their companies' implementations of technologies like side collision avoidance, lane guidance, electronic logs, and in-cab cameras.
Steve Keppler - Minimizing Roadside Inspections
The document summarizes the Commercial Vehicle Safety Alliance (CVSA), a nonprofit organization comprised of motor carrier safety enforcement agencies in North America. The CVSA works to promote uniformity in commercial motor vehicle inspections and regulations through committees and programs. Roadside inspections are a core CVSA activity, with over 4 million conducted annually across North America. Inspections focus on critical vehicle and driver issues to improve safety and compliance.
K. calhoun growing your own technicians
This document discusses strategies for addressing the shortage of skilled technicians, including growing one's own technicians through an apprentice program. It outlines how the author's company crafted a curriculum combining classroom and hands-on training. It also details how they branded their apprentice graduates as a "High Gear Performance Team" to attract candidates and promote retention, developing career paths, recognition programs, and succession planning to keep skilled workers.
J. meil 2015 economic outlook for trucking
The document provides an overview and outlook of the economics, transportation, and commercial vehicle markets. It summarizes key indicators showing slow but steady economic growth is expected to continue for the next 3-5 years. Transportation and freight growth is satisfactory in 2014 and expected to improve in 2015. Commercial vehicle production and sales remain high and stable historically. While the driver shortage is the top operational challenge for carriers, the document argues it is a sign of prosperity rather than an obstacle to profits, as carriers can take actions to improve driver retention.
J. elliott connecting with today's drivers
Load One LLC is an expedited carrier founded in 2003 based in Detroit, Michigan that has experienced 22% annual growth. Most drivers today carry smartphones, tablets, or laptops, so Load One uses technology to connect with drivers for recruiting, retention, training, and marketing. They recruit through their website, blogs, and social media and train drivers through online safety videos and tests to reduce costs and increase customization. Load One also uses a driver portal and in-cab technology to improve the driver experience and engage drivers.
A. sandberg whats ahead on regulatory front
This document outlines FMCSA's regulatory timeline and priorities for 2014-2015. Key items include finalizing rules on electronic logging devices and supporting documents by September 2015, increasing insurance minimums, and prohibiting coercion in the supply chain. The agency is also studying issues like hours of service rules and hearing impaired drivers. CSA safety measurement system remains under scrutiny, and its future use is uncertain as FMCSA focuses on other compliance review methods instead of public carrier ratings.
Wiliams
Dave Williams, Vice President of Knight Transportation, discusses factors that fleets consider when buying trucks and how government regulations have impacted their decision making. Operating costs such as fuel and downtime are now more substantial factors compared to historically only considering acquisition price and residual value. Both federal and state regulations around emissions, fuel economy, and hours of service have influenced the calculation of total cost of ownership that fleets use which considers acquisition price, operating costs, and residual value. Williams also outlines upcoming trends in trucking technology and features as well as trends that are declining.
Rich glassman
Rich Glasmann discusses how real-time data from trucks can transform the trucking industry. Data is collected from various sources on the truck including the engine, transmission, sensors, and telematics. This data provides valuable insights and allows for informed decisions, real-time actions, and more efficient use of fleet resources. New technologies are emerging such as data analytics, prognostics, over-the-air programming, vehicle-to-vehicle communication, and autonomous driving with the goal of improving safety, efficiency, and collaboration across the industry.
Kar
The document discusses trends in the global medium and heavy-duty truck market through 2022. It forecasts that global truck sales will reach approximately 4.6 million units by 2022, driven by growth in emerging markets. Natural gas and alternative fuel trucks are expected to see strong increases, while advanced diesel technologies will continue to improve efficiency and emissions. The use of telematics and predictive maintenance solutions will also expand significantly.
Glassman
The document discusses real-time data from trucks and how it can be used. It describes various data sources from vehicle components and sensors. This data provides information to help fleet managers and drivers make informed, real-time decisions to improve efficiency and productivity. While privacy was initially a concern, new laws and standards have addressed this. Telematics services now use data for applications like navigation, hours of service tracking, and performance monitoring. Future opportunities include data analytics, prognostics, over-the-air programming, and vehicle-to-vehicle or vehicle-to-infrastructure communication to enable autonomous driving through collaboration between vehicle manufacturers, suppliers, and telematics providers.
Ewald
Wabash National Corporation is a $1.6 billion manufacturer of truck trailers and related transportation equipment with 5,700 employees across 12 manufacturing locations. The document discusses Wabash's evolution of trailer designs from the 1930s to today to improve efficiency through lighter weight materials and aerodynamic designs. It also outlines fleet buyers' criteria of optimizing weight, fuel economy, life of equipment, and regulatory compliance and safety. The document provides examples of lightweight and technology options that can reduce trailer weight and improve fuel efficiency.
Broughton
This document provides an analysis of macroeconomic and transportation industry trends by Donald Broughton, Senior Transportation Analyst at Avondale Partners. It includes charts and commentary on topics like inflation, interest rates, tonnage growth across transportation modes, capacity constraints in trucking and rail, and the relationship between freight demand, pricing, and trucking company failures. The overall message is that while macroeconomic indicators appear weak, transportation data tells a different story of recovery and tightening capacity that supports continued improvement in freight rates.
Ccj june 2014
The document discusses trends in the freight transportation industry and what they may indicate about the economy. It finds that demand is increasing across truck, rail, and air freight while capacity is tightening. This is driving increased pricing power across all modes of freight. The document also notes that fracking is contributing to increased oil and gas production and rail and trucking companies are increasing capital expenditures to expand capacity.
More from Aaron Heine (19)
Recently uploaded
一比一原版(SLU毕业证)圣路易斯大学毕业证成绩单专业办理
SLU毕业证原版定制【微信：176555708】【圣路易斯大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Internet of Things in Manufacturing: Revolutionizing Efficiency & Quality | C...
This article delves into how the Internet of Things in manufacturing is reshaping the industry, its benefits, challenges, and future prospects.
Understanding User Behavior with Google Analytics.pdf
Unlocking the full potential of Google Analytics is crucial for understanding and optimizing your website’s performance. This guide dives deep into the essential aspects of Google Analytics, from analyzing traffic sources to understanding user demographics and tracking user engagement.
Traffic Sources Analysis:
Discover where your website traffic originates. By examining the Acquisition section, you can identify whether visitors come from organic search, paid campaigns, direct visits, social media, or referral links. This knowledge helps in refining marketing strategies and optimizing resource allocation.
User Demographics Insights:
Gain a comprehensive view of your audience by exploring demographic data in the Audience section. Understand age, gender, and interests to tailor your marketing strategies effectively. Leverage this information to create personalized content and improve user engagement and conversion rates.
Tracking User Engagement:
Learn how to measure user interaction with your site through key metrics like bounce rate, average session duration, and pages per session. Enhance user experience by analyzing engagement metrics and implementing strategies to keep visitors engaged.
Conversion Rate Optimization:
Understand the importance of conversion rates and how to track them using Google Analytics. Set up Goals, analyze conversion funnels, segment your audience, and employ A/B testing to optimize your website for higher conversions. Utilize ecommerce tracking and multi-channel funnels for a detailed view of your sales performance and marketing channel contributions.
Custom Reports and Dashboards:
Create custom reports and dashboards to visualize and interpret data relevant to your business goals. Use advanced filters, segments, and visualization options to gain deeper insights. Incorporate custom dimensions and metrics for tailored data analysis. Integrate external data sources to enrich your analytics and make well-informed decisions.
This guide is designed to help you harness the power of Google Analytics for making data-driven decisions that enhance website performance and achieve your digital marketing objectives. Whether you are looking to improve SEO, refine your social media strategy, or boost conversion rates, understanding and utilizing Google Analytics is essential for your success.
Discover the benefits of outsourcing SEO to India
"Discover the benefits of outsourcing SEO to India! From cost-effective services and expert professionals to round-the-clock work advantages, learn how your business can achieve digital success with Indian SEO solutions.
不能毕业如何获得(USYD毕业证)悉尼大学毕业证成绩单一比一原版制作
挂科购买☀【悉尼大学毕业证购买】【微信176555708】【USYD毕业证模板办理】加拿大文凭、本科、硕士、研究生学历都可以做,二、业务范围：
★、全套服务：毕业证、成绩单、化学专业毕业证书伪造【悉尼大学大学毕业证】微信176555708【USYD学位证书购买】◆◆◆◆◆ — — — 归国服务中心 — — -◆◆◆◆◆
【主营项目】
一.毕业证、成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证、学位证、成绩单办理流程：
1、客户提供办理信息：姓名、生日、专业、学位、毕业时间等（如信息不确定可以咨询顾问：【微信176555708】我们有专业老师帮你查询）；
2、开始安排制作毕业证、成绩单电子图；
3、毕业证、成绩单电子版做好以后发送给您确认；
4、毕业证、成绩单电子版您确认信息无误之后安排制作成品；
5、成品做好拍照或者视频给您确认；
6、快递给客户（国内顺丰，国外DHL、UPS等快读邮寄）。
专业服务，请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理，终生受用，一步到位，高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
◆招聘代理：本公司诚聘英国、加拿大、澳洲、新西兰、加拿大、法国、德国、新加坡各地代理人员，如果你有业余时间，有兴趣就请联系我们咨询【微信176555708】
没文凭怎么找工作。让您回国发展信心十足！
★、真实教育部学历学位认证；（一对一专业服务，可全程监控跟踪进度）
★、真实使馆认证，可以通过大使馆查询确认；（即教育部留服认证，不成功不收费）
★、毕业证、成绩单等材料，从防伪到印刷、水印到钢印烫金，高精仿度都是跟学校原版100%相同的；（敬请放心使用）
★、可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的毕业证、百分之百让您绝对满意、
★、印刷，DHL快递毕业证、成绩单7个工作日，真实大使馆教育部认证1个月。为了达到高水准高效率。
办理毕业证(UPenn毕业证)宾夕法尼亚大学毕业证成绩单快速办理
官方原版办理宾夕法尼亚大学毕业证【微信176555708】学历认证怎么做：原版仿制宾夕法尼亚大学电子版成绩单毕业证认证【宾夕法尼亚大学毕业证成绩单】、宾夕法尼亚大学文凭证书成绩单复刻offer录取通知书、购买UPenn圣力嘉学院本科毕业证、【宾夕法尼亚大学毕业证办理UPenn毕业证书哪里买】、宾夕法尼亚大学 Offer在线办理UPenn Offer宾夕法尼亚大学Bachloer Degree。（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
成绩单ps(UST毕业证)圣托马斯大学毕业证成绩单快速办理
一比一原版制作UST毕业证【微信176555708】圣托马斯大学毕业证书原版↑制作圣托马斯大学学历认证文凭办理圣托马斯大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【微信176555708】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
Search Result Showing My Post is Now Buried
Search results burying my post that used to rank before Google's March 2024 algorithm update.
APNIC Foundation, presented by Ellisha Heppner at the PNG DNS Forum 2024
Ellisha Heppner, Grant Management Lead, presented an update on APNIC Foundation to the PNG DNS Forum held from 6 to 10 May, 2024 in Port Moresby, Papua New Guinea.
留学学历(UoA毕业证)奥克兰大学毕业证成绩单官方原版办理
制做办理奥克兰大学学历证书＜176555708微信＞【毕业证明信-推荐信做学费单＞【微信176555708】【制作UoA毕业证文凭认证奥克兰大学毕业证成绩单购买】【UoA毕业证书】{奥克兰大学文凭购买}】成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，＞【制作UoA毕业证文凭认证奥克兰大学毕业证成绩单购买】【UoA毕业证书】{奥克兰大学文凭购买}留信网认证。
奥克兰大学学历证书＜微信176555708（一对一服务包括毕业院长签字,专业课程,学位类型,专业或教育领域,以及毕业日期.不要忽视这些细节.这两份文件同样重要!毕业证成绩单文凭留信网学历认证！）[留学文凭学历认证(留信认证使馆认证)奥克兰大学毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理奥克兰大学奥克兰大学硕士毕业证成绩单信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。
存档可查的(USC毕业证)南加利福尼亚大学毕业证成绩单制做办理
精仿办理南加利福尼亚大学毕业证成绩单（【微信176555708】）毕业证学历认证OFFER专卖国外文凭学历学位证书办理澳洲文凭|澳洲毕业证,澳洲学历认证,澳洲成绩单【微信176555708】 澳洲offer,教育部学历认证及使馆认证永久可查 ,国外毕业证|国外学历认证,国外学历文凭证书 USC毕业证，USC毕业证，USC毕业证，USC毕业证，USC毕业证，USC毕业证【微信176555708】，USC毕业证，专业为留学生办理毕业证、成绩单、使馆留学回国人员证明、教育部学历学位认证、录取通知书、Offer、（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
国外证书(Lincoln毕业证)新西兰林肯大学毕业证成绩单不能毕业办理
退学办理新西兰林肯大学毕业证【微信176555708】学历认证怎么做：原版仿制新西兰林肯大学电子版成绩单毕业证认证【新西兰林肯大学毕业证成绩单】、新西兰林肯大学文凭证书成绩单复刻offer录取通知书、购买Lincoln圣力嘉学院本科毕业证、【新西兰林肯大学毕业证办理Lincoln毕业证书哪里买】、新西兰林肯大学 Offer在线办理Lincoln Offer新西兰林肯大学Bachloer Degree。1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信176555708我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：新西兰林肯大学新西兰林肯大学毕业证文凭证书全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信176555708）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。
留学挂科(UofM毕业证)明尼苏达大学毕业证成绩单复刻办理
精仿办理明尼苏达大学学历证书＜176555708微信＞【毕业证明信-推荐信做学费单＞【微信176555708】【制作UofM毕业证文凭认证明尼苏达大学毕业证成绩单购买】【UofM毕业证书】{明尼苏达大学文凭购买}】成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，＞【制作UofM毕业证文凭认证明尼苏达大学毕业证成绩单购买】【UofM毕业证书】{明尼苏达大学文凭购买}留信网认证。
明尼苏达大学学历证书＜微信176555708（一对一服务包括毕业院长签字,专业课程,学位类型,专业或教育领域,以及毕业日期.不要忽视这些细节.这两份文件同样重要!毕业证成绩单文凭留信网学历认证！）（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
制作原版1:1(Monash毕业证)莫纳什大学毕业证成绩单办理假
退学买莫纳什大学毕业证>【微信176555708】办理莫纳什大学毕业证成绩单【微信176555708】Monash毕业证成绩单Monash学历证书Monash文凭【Monash毕业套号文凭网认证莫纳什大学毕业证成绩单】【哪里买莫纳什大学毕业证文凭Monash成绩学校快递邮寄信封】【开版莫纳什大学文凭】Monash留信认证本科硕士学历认证1:1完美还原海外各大学毕业材料上的工艺：水印阴影底纹钢印LOGO烫金烫银LOGO烫金烫银复合重叠。文字图案浮雕激光镭射紫外荧光温感复印防伪。
可办理以下真实莫纳什大学存档留学生信息存档认证：
1莫纳什大学真实留信网认证（网上可查永久存档无风险百分百成功入库）；
2真实教育部认证（留服）等一切高仿或者真实可查认证服务（暂时不可办理）；
3购买英美真实学籍（不用正常就读直接出学历）；
4英美一年硕士保毕业证项目（保录取学校挂名不用正常就读保毕业）
留学本科/硕士毕业证书成绩单制作流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询莫纳什大学莫纳什大学毕业证offer）；
2开始安排制作莫纳什大学毕业证成绩单电子图；
3莫纳什大学毕业证成绩单电子版做好以后发送给您确认；
4莫纳什大学毕业证成绩单电子版您确认信息无误之后安排制作成品；
5莫纳什大学成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — — — — — — — — 《文凭顾问微信：176555708》
Ready to Unlock the Power of Blockchain!
Imagine a world where data flows freely, yet remains secure. A world where trust is built into the fabric of every transaction. This is the promise of blockchain, a revolutionary technology poised to reshape our digital landscape.
Toptal Tech is at the forefront of this innovation, connecting you with the brightest minds in blockchain development. Together, we can unlock the potential of this transformative technology, building a future of transparency, security, and endless possibilities.
制作毕业证书(ANU毕业证)莫纳什大学毕业证成绩单官方原版办理
在线办理莫纳什大学毕业证【微信：176555708】(ANU毕业证书)成绩单学位证【微信：176555708】，留信认证（真实可查，永久存档）纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。#一整套莫纳什大学文凭证件办理#—包含莫纳什大学莫纳什大学毕业证文凭证书学历认证|使馆认证|归国人员证明|教育部认证|留信网认证永远存档教育部学历学位认证查询办理国外文凭国外学历学位认证#我们提供全套办理服务。
一整套留学文凭证件服务：
一：莫纳什大学莫纳什大学毕业证文凭证书毕业证 #成绩单等全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站永久可查
四：留信认证留学生信息网站永久可查
国外毕业证学位证成绩单办理方法：
1客户提供办理莫纳什大学莫纳什大学毕业证文凭证书信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
教育部文凭学历认证认证的用途：
如果您计划在国内发展那么办理国内教育部认证是必不可少的。事业性用人单位如银行国企公务员在您应聘时都会需要您提供这个认证。其他私营 #外企企业无需提供！办理教育部认证所需资料众多且烦琐所有材料您都必须提供原件我们凭借丰富的经验帮您快速整合材料让您少走弯路。
实体公司专业为您服务如有需要请联系我: 微信176555708
重新申请毕业证书(RMIT毕业证)皇家墨尔本理工大学毕业证成绩单精仿办理
不能毕业办理【RMIT毕业证【微信176555708】皇家墨尔本理工大学文凭学历】【微信176555708】【皇家墨尔本理工大学文凭学历证书】【皇家墨尔本理工大学毕业证书与成绩单样本图片】毕业证书补办 Fake Degree做学费单【毕业证明信-推荐信】成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，留信网认证。网上存档永久可查！全套服务：皇家墨尔本理工大学皇家墨尔本理工大学本科学位证成绩单真实回国人员证明 #真实教育部认证。让您回国发展信心十足#铸就十年品质！信誉！实体公司！可以视频看办公环境样板如需办理真实可查可以先到公司面谈勿轻信小中介黑作坊！
可以提供皇家墨尔本理工大学钢印 #水印 #烫金 #激光防伪 #凹凸版 #最新版的毕业证 #百分之百让您绝对满意
印刷DHL快递毕业证 #成绩单7个工作日真实大使馆教育部认证1个月。为了达到高水准高效率
请您先以qq或微信的方式对我们的服务进行了解后如果有皇家墨尔本理工大学皇家墨尔本理工大学本科学位证成绩单帮助再进行电话咨询。
国外毕业证学位证成绩单如何办理：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作皇家墨尔本理工大学毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
一比一原版(LBS毕业证)伦敦商学院毕业证成绩单专业办理
LBS毕业证原版定制【微信：176555708】【伦敦商学院毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Recently uploaded (20)
Internet of Things in Manufacturing: Revolutionizing Efficiency & Quality | C...
Internet of Things in Manufacturing: Revolutionizing Efficiency & Quality | C...
Understanding User Behavior with Google Analytics.pdf
Understanding User Behavior with Google Analytics.pdf
APNIC Foundation, presented by Ellisha Heppner at the PNG DNS Forum 2024
APNIC Foundation, presented by Ellisha Heppner at the PNG DNS Forum 2024
Diez
- 1. JOHN J. DIEZ Senior Vice President, Ryder Dedicated
- 2. Impacts of the New Technology • When properly used and maintained, the new technology helps reduce the harmful pollution from heavy-duty highway vehicles • When not properly used, the technology can cause some serious pain for fleet operators – Decreased fuel economy – Unscheduled downtime = missed deliveries – Engine de-rating (loss of engine power) • Need to educate yourself – Pay attention to the on-board vehicle systems and do not ignore – Training of drivers, dispatchers and technicians
- 3. Impacts of the New Technology Average Power Age (in Months) 70 80 90 100 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Age(inMonths) Average vehicle holding patterns have risen nearly a year in last decade
- 4. Impacts of the New Technology • No significant change in mileage patterns over the past decade as a result of technological changes • Initial experience suggests good acceptance of new technology in secondary used vehicle market • Vehicle residual values on new technology, expressed as a percent of acquisition price, look to be performing consistent with pre-EPA ‘07 technology residual values
- 5. Impacts of the New Technology • Each generation of EPA compliant engine technology showing improvement • Complexity of new technology has driven higher maintenance costs and increased down time • Complexity of technology has created challenges for drivers and technicians alike • Continued improvements being made by OEMs on new engine technology systems and component parts