Design and development of pic microcontroller based vehicle monitoring system using controller area network (can) protocol
•Download as DOC, PDF•
0 likes•126 views
The document discusses the design and development of a vehicle monitoring system using a PIC microcontroller and Controller Area Network (CAN) protocol. The system monitors various vehicle parameters like temperature, carbon monoxide levels, battery voltage, and detects sparks or fires. The software is developed in Embedded C using MPLab IDE and the schematic is prepared using OrCAD. The hardware is implemented and software porting is completed.
Report
Share
Report
Share
Recommended
M.tech project abstract
The document describes the design and development of a vehicle monitoring system using a PIC microcontroller and CAN protocol. The system monitors various vehicle parameters like temperature, CO levels, battery voltage, and light detection through CAN communication between sensor nodes and a display node. It aims to provide real-time monitoring of these factors as an improvement over traditional peer-to-peer electronic control unit connections. Key hardware includes PIC microcontrollers, sensors, an LCD display, and CAN controller and transceiver chips. The system is programmed using embedded C and can potentially be applied to monitor vehicles.
Sgcp13cochrane
Cyan Technology provides integrated smart metering solutions for emerging markets, including India. Their solutions use wireless mesh networks to remotely collect meter data. Their CyLec technology allows automated meter reading initially, with an upgrade path to advanced metering infrastructure. This provides utilities in emerging regions with a scalable and cost-effective way to remotely collect meter data and gain operational efficiencies.
Delivering distribution intelligence with MV/LV supervision and control
This document provides an overview of Landis+Gyr's smart grid solutions for medium voltage (MV) and low voltage (LV) supervision and control. It discusses utility challenges that these solutions address such as improving outage response times and power quality issues. The document outlines Landis+Gyr's portfolio of products including the S650, S760, S780 and S790 which provide monitoring, control and automation capabilities at the MV/LV level. It also summarizes three customer projects with Unison in New Zealand, Enexis in the Netherlands, and DONG Energy in Denmark that have implemented Landis+Gyr solutions to address their specific needs around power quality monitoring, distribution automation and MV/LV monitoring respectively.
7 dani heredero v2_g_06_dani h
This document discusses enabling local market technologies like vehicle-to-grid (V2G), battery-to-grid (B2G) and intelligent distributed power router (IDPR). It introduces these concepts and outlines the factors, functions and features relevant to implementing V2G, B2G and IDPR technologies. It also describes potential business opportunities for electric vehicle supply equipment and provides details on the components and operation of power units needed to implement V2G, B2G and IDPR systems.
Vlsi 2016- projects list
This document lists VLSI IEEE projects from 2016. It provides project codes and names for 24 projects related to areas like multipliers, floating point arithmetic, DSP acceleration, FIR filters, error correction codes, FFTs, modular arithmetic, and neuromorphic circuits. The document also provides contact information for Newzen Infotech, the organization hosting the projects. Most projects are listed as in the "Front End" stage, but a few related to analog/mixed-signal design and low-power circuits are in the "Back End" stage.
pathway 05: Open standards and interoperability- creating a new picture of th...
In this issue of «pathway»:
+we will explore how open standards and interoperability enable utilities to manage the risks inherent in high volume deployments of smart metering technologies,
+IDIS (Interoperable Device Interface Specification) Association approach to interoperability,
+how Landis+Gyr and other market players commit themselves to the implementation of open standards into interoperable future-proof solutions.
WAGO viedā ēka (BMS)
This document provides information about WAGO Kontakttechnik GmbH & Co. KG. It discusses that WAGO was founded in 1951 in Minden, Germany and is now the headquarters for the WAGO Group. It has over 5,000 employees working across 9 production facilities globally. WAGO offers automation solutions for building installation and automation, industrial electronics, and represents its products in over 110 countries.
Closing the gap between smart metering and distribution automation with trans...
- Real-time metering to improve transparency to medium and low voltage networks
- Utilizing metered quality data for network maintenance and investment planning
- Value of reference metering: identify and minimize technical and non-technical losses
Recommended
M.tech project abstract
The document describes the design and development of a vehicle monitoring system using a PIC microcontroller and CAN protocol. The system monitors various vehicle parameters like temperature, CO levels, battery voltage, and light detection through CAN communication between sensor nodes and a display node. It aims to provide real-time monitoring of these factors as an improvement over traditional peer-to-peer electronic control unit connections. Key hardware includes PIC microcontrollers, sensors, an LCD display, and CAN controller and transceiver chips. The system is programmed using embedded C and can potentially be applied to monitor vehicles.
Sgcp13cochrane
Cyan Technology provides integrated smart metering solutions for emerging markets, including India. Their solutions use wireless mesh networks to remotely collect meter data. Their CyLec technology allows automated meter reading initially, with an upgrade path to advanced metering infrastructure. This provides utilities in emerging regions with a scalable and cost-effective way to remotely collect meter data and gain operational efficiencies.
Delivering distribution intelligence with MV/LV supervision and control
This document provides an overview of Landis+Gyr's smart grid solutions for medium voltage (MV) and low voltage (LV) supervision and control. It discusses utility challenges that these solutions address such as improving outage response times and power quality issues. The document outlines Landis+Gyr's portfolio of products including the S650, S760, S780 and S790 which provide monitoring, control and automation capabilities at the MV/LV level. It also summarizes three customer projects with Unison in New Zealand, Enexis in the Netherlands, and DONG Energy in Denmark that have implemented Landis+Gyr solutions to address their specific needs around power quality monitoring, distribution automation and MV/LV monitoring respectively.
7 dani heredero v2_g_06_dani h
This document discusses enabling local market technologies like vehicle-to-grid (V2G), battery-to-grid (B2G) and intelligent distributed power router (IDPR). It introduces these concepts and outlines the factors, functions and features relevant to implementing V2G, B2G and IDPR technologies. It also describes potential business opportunities for electric vehicle supply equipment and provides details on the components and operation of power units needed to implement V2G, B2G and IDPR systems.
Vlsi 2016- projects list
This document lists VLSI IEEE projects from 2016. It provides project codes and names for 24 projects related to areas like multipliers, floating point arithmetic, DSP acceleration, FIR filters, error correction codes, FFTs, modular arithmetic, and neuromorphic circuits. The document also provides contact information for Newzen Infotech, the organization hosting the projects. Most projects are listed as in the "Front End" stage, but a few related to analog/mixed-signal design and low-power circuits are in the "Back End" stage.
pathway 05: Open standards and interoperability- creating a new picture of th...
In this issue of «pathway»:
+we will explore how open standards and interoperability enable utilities to manage the risks inherent in high volume deployments of smart metering technologies,
+IDIS (Interoperable Device Interface Specification) Association approach to interoperability,
+how Landis+Gyr and other market players commit themselves to the implementation of open standards into interoperable future-proof solutions.
WAGO viedā ēka (BMS)
This document provides information about WAGO Kontakttechnik GmbH & Co. KG. It discusses that WAGO was founded in 1951 in Minden, Germany and is now the headquarters for the WAGO Group. It has over 5,000 employees working across 9 production facilities globally. WAGO offers automation solutions for building installation and automation, industrial electronics, and represents its products in over 110 countries.
Closing the gap between smart metering and distribution automation with trans...
- Real-time metering to improve transparency to medium and low voltage networks
- Utilizing metered quality data for network maintenance and investment planning
- Value of reference metering: identify and minimize technical and non-technical losses
Smart metering – the stepping stone to a smart grid
The future of the energy industry can be seen from many different angles: for the fourth issue of pathway, we decided to look through the lenses of British photojournalist Toby Smith. He battled tough conditions in the Scottish Highlands to bring back some powerful pictures that will change your perception of power generation. Additionally, we share our insights on the key strategic decisions utilities need to take when choosing the right kind of smart metering solution. http://bit.ly/1cEAHrH
Visual light communication
This is a presentation about visual light communication.Though this project is done by a group of students this presentation is prepared by me with help of all of the nmes mentioned in the presentation. In this ppt you will find reliable information about Light Fidelity or Visual Light Communications and how it works and it's applications.
Thank You.
A Pathway Towards Smart Grids Through an Open IEC Based Software Architecture
The document discusses a pathway towards smart grids through an open IEC-based software architecture. It proposes a reference architecture that separates the data model from the underlying communication and data acquisition systems to enable new business applications. The architecture is based on international standards, particularly the IEC 61968 series, to ensure interoperability and maximize return on investment for utilities.
PLS 2017: Smart street lighting: sensors vs big data
Streetlight poles and luminaires are ideal hosts for connecting sensors. They provide fine-grained information about the urban environment, and are used to provide adaptive lighting but also feed into many municipal systems and departments. Examples include minute-by-minute traffic analytics or street-by-street air quality monitoring.
But if street lighting is to become the catalyst for “smart city” applications, lighting professionals need to understand when to harness sensor data, and when to consider application data or predictive “big data”. The world is changing and we need to take a wider view. Keith will focus on deployed use cases to help to make sense of the practical and economic implications of these important developments.
Talk by Keith Henry AMILP, Telensa
cofaso Flyer
cofaso is a wieldy branch solution which is developed for design engineering. There are no hided or complex menus. Context-sensitive and simple operating, use of tree views for better project structuring. cofaso provides a working environment meeting user's needs with professional user interface. Fast and effective working in the graphic editor is made possible by intelligent user guidance.
6 roberto jjii_empower_architecture
The document describes the EMPOWER architecture for local energy markets. It defines the relationships between different agents in local smart grids through a mapping of technical, business, and market models. The architecture includes a control cloud, market cloud, and communication infrastructure to enable negotiation and trading of energy between consumers, producers, storage units, and the distribution system operator. It applies the SGAM model to specify the control, market and communication interactions between these entities at different zones and domains. Finally, it outlines the overall EMPOWER architecture linking field devices and flexibility services to the SESP platform and external information providers.
PLS 2017: Smart Lighting goes Smart City - How can Standards Increase Indepen...
PLS 2017: Smart Lighting goes Smart City - How can Standards Increase Indepen...Institution of Lighting Professionals
Professional management of street lighting control systems is the first step towards Smarter Cities and reducing energy consumption. A standardized management interface for street lighting networks, luminaire controllers and other smart city applications enables interoperability and futureproofs the systems.
Today cities face many challenges on the way to become smart cities, including to make sure that they decide for state-of-the-art technology when developing a large variety of public services ranging from outdoor lighting over parking and waste management to E-Mobility and many other applications. Most of these services are long-term investments and will be in use for decades. Besides trying to foster competition and negotiate the best pricing, public purchasers prefer to invest in open systems to guarantee continued access to future-proof solutions and to avoid vendor lock-in. Leading cities are increasingly looking to select interoperable solutions across their systems.
Founded in 2012, the TALQ Consortium is establishing a globally accepted standard for management software interfaces to control and monitor heterogeneous outdoor lighting networks. The new TALQ interface is a specification for information exchange, suitable for implementation in various products and systems. This way interoperability between Central Management Systems (CMS) and Outdoor Lighting Networks (OLN) from different vendors will be enabled, such that a single CMS can control different OLNs in different parts of a city or region. In 2016 TALQ decided to open up its scope to standardizing interfaces for wider smart city applications.
Major Outcomes:
- Potential of intelligent outdoor lighting and smart city solutions for the environment and society
- How to increase flexibility while decreasing operational costs
- Why smart cities have more transparency
- The benefits of an industry standard for industry and municipalities/customers
Talk by Brian McGuigan, TALQ ConsortiumDigital parking system
This document describes a digital parking management system that uses RFID technology. The system will assign RFID tags to cars and use readers to track vacant parking spaces. It will be implemented in four stages: 1) encoding tags, 2) reading tags with a microcontroller, 3) uploading data to the internet, and 4) tracking vacant spaces online. The system is designed to enhance parking utilization and let users check space availability remotely.
Future office by iNELS
Future office offers many solutions for all types of office space. You can monitor air quality, set up heating, lighting and shading accurately according to the actual requirements, in real time to monitor the occupancy of the meeting space, depending on the online calendars. Lighting is automatically adapted to the intensity of natural light, depending on the presence of people, recognizing individual people and their preferences. Similarly, heating control, depending on the presence of people in the area, works in pre-set scenarios.
PLS 2017: Residential electric vehicle charging - utilising the common street...
PLS 2017: Residential electric vehicle charging - utilising the common street...Institution of Lighting Professionals
Ubitricity founder Knut Hechtfischer will describe a unique and innovative solution developed for residential on-street electric vehicle charging. This solution transforms the common street light into an instantly available electric vehicle charging point for those with on-street parking. At a time when electric vehicle adoption is increasing across the country, it is widely recognised that not everyone has access to a garage or even a driveway. This issue is particularly prevalent in major cities such as London, Glasgow, Edinburgh, etc. Street lighting however is available throughout most urban residential areas, offering a potential solution. In addition, columns fitted with charging points could also offer potential future revenue streams to cash strapped councils and can also tie in with future smart city initiatives.
Talk by Knut Hechtfischer MBA, UbitricityMATLAB Projects for Electronics Engineering Students Research Help
This document provides information on Matlab projects for electronics engineering students. It lists various electronics fields that can be explored for Matlab projects, including VLSI, power generation, power line communications, aerospace, and control systems. Embedded project topics are also listed, such as temperature monitoring using PIC18F4550, a serial port oscilloscope with a microcontroller, and stepper motor and LED control with an interfacing circuit. The document concludes by listing some latest Matlab projects, including real-time embedded automotive systems, vision-based automated guided vehicles, space exploration, low power embedded systems, and embedded electronic measurement systems. Contact details are provided to learn more.
PLS 2017: Technical Committee update
The document provides updates from the ILP Technical Committee on several current projects:
1. It discusses the PLG01 CMS project which involves developing functional benefits, system components, architecture, implementation issues, and delivery process for a CMS system.
2. It provides an update on the TR22 project to review and update guidance on lighting supports, including developing a robust condition assessment methodology.
3. It outlines a new guidance document being developed on electrical street furniture which will address safety, installation, and operational considerations for equipment like EV chargers and market stalls being installed on highways.
Fair Meter: E360
- SMRS Smart Meter project
- Green Deal Fair meter
- Key principles
- Pilot details
- Opportunities
- Introduction to other markets
Sdr 1
The document describes a software radio platform using a wideband IF sampled architecture being developed by researchers at the Budapest University of Technology and Economics. The platform can be reconfigured through software for multiple air interfaces and technologies. It uses an IF sampled architecture where modulation is done digitally rather than in the analog domain as with traditional radios. A prototype has been developed including a 16-channel multi-carrier transmitter with a 1-2500MHz RF bandwidth that can generate signals like GSM/EDGE through a DSP unit and digital upconverters. The goal is to design and implement this scalable software radio platform.
Innovation flagships in Belgium
A selection of innovation flagships in Belgium, represented by Agoria, the Federation for the technology industry.
Actemium India_General_2.0
Actemium is a global industrial services company that provides engineering, design, automation, and maintenance solutions for industrial processes. Over the past 20 years, it has grown from 5 business units in 3 countries generating €15 million to over 300 business units across 38 countries generating €3 billion through strategic acquisitions and expanding into new markets and technologies like industrial IT, energy efficiency solutions, and global service capabilities. Actemium offers a wide range of specialized services across industries like chemical, oil and gas, manufacturing, and utilities focused on improving production efficiency, quality, and safety through automation, instrumentation, electrical and mechanical engineering expertise.
Realtime-Online Tenant Billing solution
We are increasingly getting enquiries for a robust, MID compliant metering solution, for tenant billing and departmental cost allocation. Our MODBUS wireless metering solution coupled with our cloud based Realtime-Online(tm) billing module, is the perfect solution. Low impact, quick and simple install, comprehensive reporting suite, very competitive price. Come and find out more at Smart IoT London - 21/22 March Excel London. (free to attend).
HIL404: V1
Probably the two most demanding power electronics applications for HIL testing are in the Electric Vehicle (EV) domain, namely: high performance motor drive, and battery chargers. Such applications pose a significant challenge for real time simulation fidelity.
Our answer to the challenge is the 4th Gen HIL Device-HIL404, our fastest HIL machine yet. With its ability to reach simulation time steps down to 200ns combined with input sampling resolution of 3.5ns it pushes the high-fidelity real-time simulation into a whole new dimension.
Zigbee and atmega32 based wireless digital control and monitoring system for ...
This document presents a wireless embedded control system using Zigbee and ATmega32 that can be used to switch on/off indoor and outdoor LED lights and reduce light intensity to effectively reduce power consumption. This improves the energy efficiency of lighting systems while providing sophisticated control over energy usage.
Concurrent multiresource arbiter design and applications
This paper presents a novel asynchronous arbiter that allocates multiple interchangeable resources among multiple clients concurrently. The arbiter uses dedicated request signals from resources and clients in pairs to form each new grant. It examines the basic 2x2 arbiter and compares a concurrent implementation to a sequential one, showing the sequential design is more practical for short resource utilization times while the concurrent works better for longer times. It also develops a scalable tiled structure to extend the arbiter beyond 2x2 for multiple clients and resources.
An embedded system for an eeg based bci
This document presents the development of an embedded system designed to function as an EEG-based brain-computer interface (BCI) system. The system uses a microcontroller and digital signal processor to process, store, and communicate EEG signals required for the application. A Matlab script generates the classifier used in the DSP to identify user intentions, while Windows programs display classification results and convert data for use in Matlab. The system's communication channel can also be integrated into wheelchairs.
75 mm Mega Pixel camera lens -BalaJi Optics India
This document provides information about the BMT-2875D 2/3" FA/MEGA PIXEL LENS SERIES from Balaji Optics. Key details include that it has a 1.5 megapixel resolution, 75mm focal length, f2.8-f16 iris range, C-mount, works with 2/3" and 1/2" imagers, and has low distortion. It provides technical specifications for the lens including dimensions, working temperature range, weight, and more. Contact and ordering information is also included.
More Related Content
What's hot
Smart metering – the stepping stone to a smart grid
The future of the energy industry can be seen from many different angles: for the fourth issue of pathway, we decided to look through the lenses of British photojournalist Toby Smith. He battled tough conditions in the Scottish Highlands to bring back some powerful pictures that will change your perception of power generation. Additionally, we share our insights on the key strategic decisions utilities need to take when choosing the right kind of smart metering solution. http://bit.ly/1cEAHrH
Visual light communication
This is a presentation about visual light communication.Though this project is done by a group of students this presentation is prepared by me with help of all of the nmes mentioned in the presentation. In this ppt you will find reliable information about Light Fidelity or Visual Light Communications and how it works and it's applications.
Thank You.
A Pathway Towards Smart Grids Through an Open IEC Based Software Architecture
The document discusses a pathway towards smart grids through an open IEC-based software architecture. It proposes a reference architecture that separates the data model from the underlying communication and data acquisition systems to enable new business applications. The architecture is based on international standards, particularly the IEC 61968 series, to ensure interoperability and maximize return on investment for utilities.
PLS 2017: Smart street lighting: sensors vs big data
Streetlight poles and luminaires are ideal hosts for connecting sensors. They provide fine-grained information about the urban environment, and are used to provide adaptive lighting but also feed into many municipal systems and departments. Examples include minute-by-minute traffic analytics or street-by-street air quality monitoring.
But if street lighting is to become the catalyst for “smart city” applications, lighting professionals need to understand when to harness sensor data, and when to consider application data or predictive “big data”. The world is changing and we need to take a wider view. Keith will focus on deployed use cases to help to make sense of the practical and economic implications of these important developments.
Talk by Keith Henry AMILP, Telensa
cofaso Flyer
cofaso is a wieldy branch solution which is developed for design engineering. There are no hided or complex menus. Context-sensitive and simple operating, use of tree views for better project structuring. cofaso provides a working environment meeting user's needs with professional user interface. Fast and effective working in the graphic editor is made possible by intelligent user guidance.
6 roberto jjii_empower_architecture
The document describes the EMPOWER architecture for local energy markets. It defines the relationships between different agents in local smart grids through a mapping of technical, business, and market models. The architecture includes a control cloud, market cloud, and communication infrastructure to enable negotiation and trading of energy between consumers, producers, storage units, and the distribution system operator. It applies the SGAM model to specify the control, market and communication interactions between these entities at different zones and domains. Finally, it outlines the overall EMPOWER architecture linking field devices and flexibility services to the SESP platform and external information providers.
PLS 2017: Smart Lighting goes Smart City - How can Standards Increase Indepen...
PLS 2017: Smart Lighting goes Smart City - How can Standards Increase Indepen...Institution of Lighting Professionals
Professional management of street lighting control systems is the first step towards Smarter Cities and reducing energy consumption. A standardized management interface for street lighting networks, luminaire controllers and other smart city applications enables interoperability and futureproofs the systems.
Today cities face many challenges on the way to become smart cities, including to make sure that they decide for state-of-the-art technology when developing a large variety of public services ranging from outdoor lighting over parking and waste management to E-Mobility and many other applications. Most of these services are long-term investments and will be in use for decades. Besides trying to foster competition and negotiate the best pricing, public purchasers prefer to invest in open systems to guarantee continued access to future-proof solutions and to avoid vendor lock-in. Leading cities are increasingly looking to select interoperable solutions across their systems.
Founded in 2012, the TALQ Consortium is establishing a globally accepted standard for management software interfaces to control and monitor heterogeneous outdoor lighting networks. The new TALQ interface is a specification for information exchange, suitable for implementation in various products and systems. This way interoperability between Central Management Systems (CMS) and Outdoor Lighting Networks (OLN) from different vendors will be enabled, such that a single CMS can control different OLNs in different parts of a city or region. In 2016 TALQ decided to open up its scope to standardizing interfaces for wider smart city applications.
Major Outcomes:
- Potential of intelligent outdoor lighting and smart city solutions for the environment and society
- How to increase flexibility while decreasing operational costs
- Why smart cities have more transparency
- The benefits of an industry standard for industry and municipalities/customers
Talk by Brian McGuigan, TALQ ConsortiumDigital parking system
This document describes a digital parking management system that uses RFID technology. The system will assign RFID tags to cars and use readers to track vacant parking spaces. It will be implemented in four stages: 1) encoding tags, 2) reading tags with a microcontroller, 3) uploading data to the internet, and 4) tracking vacant spaces online. The system is designed to enhance parking utilization and let users check space availability remotely.
Future office by iNELS
Future office offers many solutions for all types of office space. You can monitor air quality, set up heating, lighting and shading accurately according to the actual requirements, in real time to monitor the occupancy of the meeting space, depending on the online calendars. Lighting is automatically adapted to the intensity of natural light, depending on the presence of people, recognizing individual people and their preferences. Similarly, heating control, depending on the presence of people in the area, works in pre-set scenarios.
PLS 2017: Residential electric vehicle charging - utilising the common street...
PLS 2017: Residential electric vehicle charging - utilising the common street...Institution of Lighting Professionals
Ubitricity founder Knut Hechtfischer will describe a unique and innovative solution developed for residential on-street electric vehicle charging. This solution transforms the common street light into an instantly available electric vehicle charging point for those with on-street parking. At a time when electric vehicle adoption is increasing across the country, it is widely recognised that not everyone has access to a garage or even a driveway. This issue is particularly prevalent in major cities such as London, Glasgow, Edinburgh, etc. Street lighting however is available throughout most urban residential areas, offering a potential solution. In addition, columns fitted with charging points could also offer potential future revenue streams to cash strapped councils and can also tie in with future smart city initiatives.
Talk by Knut Hechtfischer MBA, UbitricityMATLAB Projects for Electronics Engineering Students Research Help
This document provides information on Matlab projects for electronics engineering students. It lists various electronics fields that can be explored for Matlab projects, including VLSI, power generation, power line communications, aerospace, and control systems. Embedded project topics are also listed, such as temperature monitoring using PIC18F4550, a serial port oscilloscope with a microcontroller, and stepper motor and LED control with an interfacing circuit. The document concludes by listing some latest Matlab projects, including real-time embedded automotive systems, vision-based automated guided vehicles, space exploration, low power embedded systems, and embedded electronic measurement systems. Contact details are provided to learn more.
PLS 2017: Technical Committee update
The document provides updates from the ILP Technical Committee on several current projects:
1. It discusses the PLG01 CMS project which involves developing functional benefits, system components, architecture, implementation issues, and delivery process for a CMS system.
2. It provides an update on the TR22 project to review and update guidance on lighting supports, including developing a robust condition assessment methodology.
3. It outlines a new guidance document being developed on electrical street furniture which will address safety, installation, and operational considerations for equipment like EV chargers and market stalls being installed on highways.
Fair Meter: E360
- SMRS Smart Meter project
- Green Deal Fair meter
- Key principles
- Pilot details
- Opportunities
- Introduction to other markets
Sdr 1
The document describes a software radio platform using a wideband IF sampled architecture being developed by researchers at the Budapest University of Technology and Economics. The platform can be reconfigured through software for multiple air interfaces and technologies. It uses an IF sampled architecture where modulation is done digitally rather than in the analog domain as with traditional radios. A prototype has been developed including a 16-channel multi-carrier transmitter with a 1-2500MHz RF bandwidth that can generate signals like GSM/EDGE through a DSP unit and digital upconverters. The goal is to design and implement this scalable software radio platform.
Innovation flagships in Belgium
A selection of innovation flagships in Belgium, represented by Agoria, the Federation for the technology industry.
Actemium India_General_2.0
Actemium is a global industrial services company that provides engineering, design, automation, and maintenance solutions for industrial processes. Over the past 20 years, it has grown from 5 business units in 3 countries generating €15 million to over 300 business units across 38 countries generating €3 billion through strategic acquisitions and expanding into new markets and technologies like industrial IT, energy efficiency solutions, and global service capabilities. Actemium offers a wide range of specialized services across industries like chemical, oil and gas, manufacturing, and utilities focused on improving production efficiency, quality, and safety through automation, instrumentation, electrical and mechanical engineering expertise.
Realtime-Online Tenant Billing solution
We are increasingly getting enquiries for a robust, MID compliant metering solution, for tenant billing and departmental cost allocation. Our MODBUS wireless metering solution coupled with our cloud based Realtime-Online(tm) billing module, is the perfect solution. Low impact, quick and simple install, comprehensive reporting suite, very competitive price. Come and find out more at Smart IoT London - 21/22 March Excel London. (free to attend).
HIL404: V1
Probably the two most demanding power electronics applications for HIL testing are in the Electric Vehicle (EV) domain, namely: high performance motor drive, and battery chargers. Such applications pose a significant challenge for real time simulation fidelity.
Our answer to the challenge is the 4th Gen HIL Device-HIL404, our fastest HIL machine yet. With its ability to reach simulation time steps down to 200ns combined with input sampling resolution of 3.5ns it pushes the high-fidelity real-time simulation into a whole new dimension.
What's hot (18)
Smart metering – the stepping stone to a smart grid
Smart metering – the stepping stone to a smart grid
A Pathway Towards Smart Grids Through an Open IEC Based Software Architecture
A Pathway Towards Smart Grids Through an Open IEC Based Software Architecture
PLS 2017: Smart street lighting: sensors vs big data
PLS 2017: Smart street lighting: sensors vs big data
PLS 2017: Smart Lighting goes Smart City - How can Standards Increase Indepen...
PLS 2017: Smart Lighting goes Smart City - How can Standards Increase Indepen...
PLS 2017: Residential electric vehicle charging - utilising the common street...
PLS 2017: Residential electric vehicle charging - utilising the common street...
MATLAB Projects for Electronics Engineering Students Research Help
MATLAB Projects for Electronics Engineering Students Research Help
Viewers also liked
Zigbee and atmega32 based wireless digital control and monitoring system for ...
This document presents a wireless embedded control system using Zigbee and ATmega32 that can be used to switch on/off indoor and outdoor LED lights and reduce light intensity to effectively reduce power consumption. This improves the energy efficiency of lighting systems while providing sophisticated control over energy usage.
Concurrent multiresource arbiter design and applications
This paper presents a novel asynchronous arbiter that allocates multiple interchangeable resources among multiple clients concurrently. The arbiter uses dedicated request signals from resources and clients in pairs to form each new grant. It examines the basic 2x2 arbiter and compares a concurrent implementation to a sequential one, showing the sequential design is more practical for short resource utilization times while the concurrent works better for longer times. It also develops a scalable tiled structure to extend the arbiter beyond 2x2 for multiple clients and resources.
An embedded system for an eeg based bci
This document presents the development of an embedded system designed to function as an EEG-based brain-computer interface (BCI) system. The system uses a microcontroller and digital signal processor to process, store, and communicate EEG signals required for the application. A Matlab script generates the classifier used in the DSP to identify user intentions, while Windows programs display classification results and convert data for use in Matlab. The system's communication channel can also be integrated into wheelchairs.
75 mm Mega Pixel camera lens -BalaJi Optics India
This document provides information about the BMT-2875D 2/3" FA/MEGA PIXEL LENS SERIES from Balaji Optics. Key details include that it has a 1.5 megapixel resolution, 75mm focal length, f2.8-f16 iris range, C-mount, works with 2/3" and 1/2" imagers, and has low distortion. It provides technical specifications for the lens including dimensions, working temperature range, weight, and more. Contact and ordering information is also included.
Covering points of interest with mobile sensors
Sensors need to autonomously deploy to cover points of interest while maintaining connectivity to a base station. This paper proposes an algorithm where each sensor moves toward a point of interest but also maintains connectivity with neighboring sensors that are part of a relative neighborhood graph, minimizing connectivity sensors and maximizing monitoring sensors. Analysis, simulations, and implementation show the efficiency of the algorithm in optimizing sensor deployment over points of interest with connectivity constraints.
50 MM Mega Pixel Machine Vision lens -BalaJi Optics India
50 MM FA/MEGA PIXEL LENS—BALAJI OPTICS INDIA”
BalaJi MicroTechnologies, India is pleased to introduce “50 MM FA/MEGA PIXEL LENS” for wide range of Factory automation & Machine Vision applications.
With strong in-house R&D & design efforts, we are happy to introduce 50 MM 2/3" imager format Mega-Pixel camera lens series under our brand name "BALAJI OPTICS" A trademark of BalaJi MicroTechnologies. A wholly owned proprietary product range of “BalaJi MicroTechnologies”.
The most crucial quality factor of a lens is its ability to capture clear images through a combination of resolving power and contrast. BalaJi MicroTechnologies has broad portfolio of Machine Vision lenses which are designed to provide optimal imaging performance for a wide variety of applications using CCD/CMOS imaging sensors. Our FA/Machine Vision lenses are designed and built using modern technologies and precision manufacturing techniques, thus produce images with superb contrast trusted
by clients from all over the industry.
Model No.: BMT-1850D
Brief Technical Review : 1.5 MP Mega Pixel Lens 50 MM Focal Length F# 1.8, 2/3” Format, C-Mount, Manual Iris
Key Features:
1) High Resolution and High Contrast
2) Low Distortion
3) Bright Images
4) Highly Compact & very cost effective
For More Enquiry,Drop an email to
sales@balaji-microtechnologies.com
Tel # 0129--6561300, 4006203
Design and development of digital pid controller for dc motor drive system us...
1) A mobile robotic system was developed using an ARM9 processor running Linux to continuously monitor farm environment and plant conditions such as temperature, humidity, and soil moisture content through onboard sensors.
2) The robotic system includes a servo motor based robotic arm for collecting soil samples and testing soil parameters, and utilizes a digital PID controller for precise position and speed control of the mobile robot.
3) Wireless control and data acquisition are accomplished using Zigbee, and a GUI created with Qt Creator displays the sensor data on a host system.
A wearable inertial sensing-based body sensor network for shoulder range of m...
This document presents a wearable body sensor network composed of two inertial modules placed on the upper limbs to assess shoulder range of motion in real-time. Each module contains an MCU, accelerometer, gyroscope and magnetometer. The sensors collect acceleration, velocity and magnetic data which is processed through a quaternion filter to minimize errors from sensor noise/drift and estimate shoulder movement without external devices.
A zigbee based wireless wearable electronic nose using flexible printed senso...
A wearable electronic nose was developed using a flexible printed sensor array integrated with Zigbee wireless communication for healthcare applications. The sensing unit was fabricated using an inkjet printing technique with eight different sensor elements responding to a variety of odors. A prototype wearable e-nose in the form of a compact armband uses Zigbee to wirelessly monitor and classify odors released from the human body during different activities, as demonstrated in preliminary principal component analysis results.
A contest oriented project for learning intelligent mobile robots
The document describes a contest-oriented project for undergraduate students to learn about intelligent mobile robots. The project involves designing robots to compete in contests like Micro mouse races and line mazes. Students first learn basic skills like microcontroller development, sensor characteristics, and servomotor control. They then use these skills to design their own robots, which must pass examination. Blogs and a wiki site document student progress. While not all students win contests, feedback shows the project motivated learning skills to build and operate intelligent mobile robots.
Tipos de inteligencia
El documento describe diferentes tipos de inteligencia según Howard Gardner, incluyendo la inteligencia práctica, conceptual y social. Explica que la inteligencia debe entenderse como multidimensional y no como una única característica. También describe cómo estas diferentes inteligencias se relacionan con la conducta adaptativa de las personas con discapacidad intelectual.
Note Anytime 2 .0 - Updated Points
Note Anytime 2.0 provides several new features and enhancements to improve the expressiveness and functionality of the note taking application. Key updates include expanded color selection options using a color wheel, additional pen types like highlighters and fountain pens for more expressive note taking. The user interface was also overhauled with a simpler design and new navigation bar. Additional features improve text editing options, file import/export capabilities, and cloud storage support through Google Drive.
Twitter Business
Twitter is a microblogging platform that allows users to post short messages called tweets. A tweet can contain up to 140 characters and can include hashtags, usernames, and links. Users follow other accounts and see their tweets in their home timeline. Tweets can be public or private. Businesses use Twitter to build their brand and engage with customers through contests, promotions, and customer service. Hashtags help tweets about common topics be discovered and go viral.
A smart prepaid energy metering system to control electricity theft
This document proposes a smart prepaid energy metering system to control electricity theft. The system uses bidirectional communication between a smart meter installed in each consumer unit and a central server using GSM modules. Consumers can recharge their meters remotely by SMSing a PIN from a scratch card. The system aims to reduce electricity theft by incorporating measures to prevent meter bypassing and tampering, which are ensured by the bidirectional SMS communication.
Automated control system for air pollution detection in vehicles
Vehicles are necessary for modern life but also contribute to air pollution. This document proposes an automated control system that uses semiconductor sensors at vehicles' emission outlets to detect pollutant levels. If levels exceed a threshold, the system will buzz to notify the driver and eventually cut off the vehicle's fuel supply after a buffer time, also using GPS to locate the nearest service station for repairs. A microcontroller would synchronize and monitor the entire process to help reduce air pollution from improperly maintained vehicles.
An apparatus in monitoring the energy charging system
The document describes a solar energy monitoring system comprised of three sub-systems: a charging sub-system, a control sub-system, and a display sub-system. The system uses wireless transmission standards like Bluetooth, Wi-Fi, and Zigbee to monitor a solar energy charging system. It was designed to generate statistical reports on the performance of simulated wireless surveillance systems and can be applied to other areas like healthcare and environmental inspection.
Viewers also liked (19)
Zigbee and atmega32 based wireless digital control and monitoring system for ...
Zigbee and atmega32 based wireless digital control and monitoring system for ...
Concurrent multiresource arbiter design and applications
Concurrent multiresource arbiter design and applications
50 MM Mega Pixel Machine Vision lens -BalaJi Optics India
50 MM Mega Pixel Machine Vision lens -BalaJi Optics India
Design and development of digital pid controller for dc motor drive system us...
Design and development of digital pid controller for dc motor drive system us...
A wearable inertial sensing-based body sensor network for shoulder range of m...
A wearable inertial sensing-based body sensor network for shoulder range of m...
A zigbee based wireless wearable electronic nose using flexible printed senso...
A zigbee based wireless wearable electronic nose using flexible printed senso...
A contest oriented project for learning intelligent mobile robots
A contest oriented project for learning intelligent mobile robots
A smart prepaid energy metering system to control electricity theft
A smart prepaid energy metering system to control electricity theft
Automated control system for air pollution detection in vehicles
Automated control system for air pollution detection in vehicles
An apparatus in monitoring the energy charging system
An apparatus in monitoring the energy charging system
Similar to Design and development of pic microcontroller based vehicle monitoring system using controller area network (can) protocol
Epma 013
This document describes a vehicle monitoring system that uses PIC microcontrollers and the Controller Area Network (CAN) protocol. The system monitors various vehicle parameters like temperature, carbon monoxide levels, battery voltage, and light levels. Two PIC microcontrollers are used - one on the engine side connected to sensors, and one on the dashboard side connected to a display. The PICs communicate over CAN to send sensor data from the engine to be displayed on the dashboard. The system was implemented using hardware circuits and software programmed with MPLab IDE.
Embedded system Basic
The document provides details about a project to develop a vehicle monitoring system using a PIC microcontroller and Controller Area Network (CAN) protocol. The system will monitor various vehicle parameters like temperature, carbon monoxide levels, battery voltage, and light detected by an LDR. Sensors will detect the parameters which will be sent to a microcontroller via CAN protocol and displayed on an LCD near the driver's seat. The document discusses the hardware and software requirements, CAN protocol features, operation of a PIC microcontroller, and sensors to be used like temperature sensor, gas sensor, LDR.
CAN, BY MD.ABDULLAH
The document describes a project report on designing and developing a vehicle monitoring system using a PIC microcontroller and Controller Area Network (CAN) protocol. The system monitors various vehicle parameters like temperature, CO levels, battery voltage, and light detection using sensors. The sensors send data to the microcontroller which transfers it to a receiver section using CAN protocol. The receiver section then displays the parameters on an LCD for the driver. The project aims to implement the latest CAN technology for accurate and fast vehicle monitoring compared to traditional systems.
Embedded system
The document describes a project report on designing and developing a vehicle monitoring system using a PIC microcontroller and Controller Area Network (CAN) protocol. The system monitors various vehicle parameters like temperature, CO levels, battery voltage, and light detection using sensors. The sensors send data to the microcontroller which transfers it to a receiver section using CAN protocol. The receiver section then displays the parameters on an LCD for the driver. The project aims to implement the latest CAN technology for accurate and fast vehicle monitoring compared to traditional systems.
Presentation3
This document describes a security feature for automobiles that is implemented using the CAN protocol. It discusses how modern vehicles contain many electronic control units connected via CAN networks to control various systems like engine management, entertainment, lighting, and more. The proposed system adds security features like vehicle theft prevention, location tracking if stolen, and automatic engine shut off in emergencies. It requires hardware like a PIC microcontroller, GSM and GPS modules, and software to design and code the system using tools like Proteus and MPLAB IDE. The system is intended to improve vehicle security and safety.
Can protocol implementation in automobile industry using wireless communicati...
This project aims to design a system to monitor and control multiple regions using CAN protocol for wireless communication in automobiles. The system allows communication between multiple devices like sensors to measure temperature, smoke, light, and gas levels which are connected to a PIC microcontroller transmitting data via CAN transceiver. An ARM processor receives the sensor data wirelessly through Zigbee and displays it on an LCD. CAN protocol is commonly used for in-vehicle networks and other transportation applications like trains and aircraft to connect electronic devices over long distances at high speeds reliably and at low cost.
PosterCANDeviceTSZS
The document summarizes the design of a handheld OBD-II reader device that connects to a vehicle's onboard diagnostic port to read error codes. It uses a PIC32 microprocessor and touchscreen LCD to interface with the CAN-bus and communicate with the vehicle's electronic control unit. The design process involved selecting components, designing schematics and PCB layout, and addressing challenges like touchscreen communication and CAN message transfer issues. The final working product allows technicians and hobbyists to view vehicle statuses not normally accessible.
PosterCANDeviceTSZS
The document summarizes the design of a handheld OBD-II reader device that connects to a vehicle's onboard diagnostic port to read error codes. It uses a PIC32 microprocessor and touchscreen LCD to interface with the CAN-bus and communicate with the engine control unit. The design process involved selecting components, designing circuits and layout, and fabricating a printed circuit board. Challenges included touchscreen communication, design errors, power issues, and CAN message transfer.
Automotive Cockpit Solutions on NXP Platforms
NXP is a well-known global manufacturer of embedded microcontrollers and processors. NXP processors power breakthrough designs and have a long history of expediting embedded system development for industrial, automotive and consumer applications. Here is a glimpse of our exemplary automotive cockpit development success stories in which we partnered with NXP Semiconductors.
https://www.embitel.com/digital-instrument-cluster
Mike Ward CV 2016.12.23
Mike Ward is a Chartered Electrical Engineer with a Masters in Digital Electronics and extensive industry experience. He has sole ownership of a patent for a wireless data logging system using RF transceivers at 433Mhz. He has experience managing full project life cycles from inception to delivery and covering all aspects of design, manufacturing, support and sale of electrical equipment.
CAN Bus Integration for Enhanced Industrial Control and Safety
The document discusses using Controller Area Network (CAN) protocol for industrial automation and safety. CAN protocol allows for efficient and real-time communication between controllers. The proposed system uses sensors like temperature, gas leakage and light intensity sensors connected to microcontrollers to monitor these parameters. If any parameter exceeds a threshold, corrective actions like activating motors or buzzers are taken. CAN protocol provides high-speed and reliable data transmission between nodes. This ensures safety in industry by enabling monitoring and control of critical parameters.
5G - promise or reality?
5G has evolved over generations of wireless technology to support new services beyond enhanced mobile broadband like ultra-reliable low latency communications and massive machine type communications. These new services enable applications for industries like tele-operated transport. 5G trials are exploring use cases for cross-border tele-operated transport involving automated barges, platooning of trucks, and remote vehicle takeover. Consortia are working to validate 5G technologies, develop business models, and address regulatory challenges to realize the promise of 5G for enabling new automated and connected mobility applications.
J1939 and OBD2 Stack Integrations With IoT Platform for Fleet Safety
J1939 and OBD2 Stack Integrations With IoT Platform for Fleet SafetyEmbitel Technologies (I) PVT LTD
Our automotive software developers implemented integration of SAE J1939 and OBD2 stacks with Freescale/NXP MCS9S12G controller. Our customer was looking for an automotive embedded systems partner with expertise in vehicle diagnostics, J1939 and OBD2 stacks integration and CAN/LIN interface development.
https://www.embitel.com/product-engineering2/embedded-casestudies/j1939-and-obd2-stack-integrations-with-iot-platform-for-fleet-safety
IRJET- Automotive Safety System using Controller Area Network(CAN) Protocol
This document proposes an automotive safety system using the Controller Area Network (CAN) protocol. It discusses designing a system with multiple safety applications including engine temperature monitoring, tire pressure monitoring, automatic headlamp dimming, and accident prevention sensing. The system uses sensors interfaced with microcontrollers that communicate over CAN. This allows monitoring of vehicle parameters and priority messaging to enhance safety. The proposed low-cost system aims to reduce accidents by providing real-time information to drivers.
Digital parking
This project aims to implement a digital vehicle management system using RFID technology. The system will allow users to check parking space availability remotely by connecting the system to the internet. The project is implemented in five stages: writing data to an RFID tag assigned to a car, reading the tag data using a microcontroller, uploading data to an Ethernet network, and tracking parking space vacancies. The system uses RFID tags on cars, an RFID reader and microcontroller for reading tag data, and displays availability on a webpage.
Micron projectsportfolio 2017
The document lists and summarizes various projects developed by Micron Engineering since its founding. It includes projects involving hardware and software design for applications in industrial automation, medical devices, transportation, and more. Client names are sometimes replaced with NDA due to non-disclosure agreements. The projects range from 2002 to present day.
GenerationRFID Test & Embedded Electronics Technology Company
This document provides an overview of an electronics company that specializes in embedded electronics development, interim personnel outsourcing, and EOL tester solutions. The company has 30 engineers across hardware prototyping, embedded software, sales, and EOL testing divisions. Recent income has declined from over €1 million in 2011-2014 to €80,000 in 2018. The company develops embedded electronics across several markets including automotive, IoT, and power electronics. It offers hardware and software development services following an ISO9001 certified process. The company also provides interim personnel outsourcing and designs EOL test solutions including test scheduling software, test fixtures, and automated optical inspection systems.
Le company presentation
Lead embedded this a startup company start in June 2021
1.LEAD EMBEDDED SPECIALIZES IN SOFT WARE DEVELOPMEAT FOR CAN EOL TOOLS USING IN UDS AND OBD2 PROTOCOLS IN AUTOMOTIVE VEHICLES .
2.WE ARE SPECIALIZES IN CONTROL OF BLDC AND PMSM MOTORS USING FOC .
Observations of can Bus Control System
One of the important criteria of the modern cars is digital control of the vehicle. Because of the quick development of embedded technology, the high performance embedded processor is inserted into auto industry it has low cost, high reliability and other features that meet the needs of modern automobile industry. In this project we have introduced an embedded system which is a combination of different CAN bus systems. Aasiya Aslam Tamboli | Prof. Sunil S. Shivdas "Observations of can Bus Control System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: http://www.ijtsrd.com/papers/ijtsrd18897.pdf
Design issues in cc2530 znp multi hop sensor networks
Grad Project : Design Issues in Wireless Sensor Networks using CC2530 Zigbee Network Processor under Dr. Asis Nasipuri [anasipur@uncc.edu]
Similar to Design and development of pic microcontroller based vehicle monitoring system using controller area network (can) protocol (20)
Can protocol implementation in automobile industry using wireless communicati...
Can protocol implementation in automobile industry using wireless communicati...
CAN Bus Integration for Enhanced Industrial Control and Safety
CAN Bus Integration for Enhanced Industrial Control and Safety
J1939 and OBD2 Stack Integrations With IoT Platform for Fleet Safety
J1939 and OBD2 Stack Integrations With IoT Platform for Fleet Safety
IRJET- Automotive Safety System using Controller Area Network(CAN) Protocol
IRJET- Automotive Safety System using Controller Area Network(CAN) Protocol
GenerationRFID Test & Embedded Electronics Technology Company
GenerationRFID Test & Embedded Electronics Technology Company
Design issues in cc2530 znp multi hop sensor networks
Design issues in cc2530 znp multi hop sensor networks
More from Ecway Technologies
Php project titles
Ecway Technologies is a software development company with offices in multiple cities in India. They offer a variety of PHP projects including a question answering system for collaborative learning, a secured file downloading system, a secure data repository for public clouds, searching images from websites, statistical entity extraction from the web, tagging in online social networks, and several other projects related to companies, employees, e-commerce, education, and more. Interested individuals can contact Ecway Technologies via phone or email to learn more about their PHP project offerings.
2013 2014 ieee vlsi titles
This document lists 28 titles of papers presented at the 2013-2014 IEEE VLSI Symposia. The papers cover a wide range of topics related to VLSI systems design, including low-power camera architectures, turbo decoder designs, on-chip voltage regulators, comparator designs, built-in self-test techniques, reconfigurable hardware, power converters, delay line designs, job scheduling, signal processors, DAC testing, memristor modeling, reliable networks-on-chip, SAR ADC designs, frequency synthesizers, power gating, and random number generation.
2013 ieee vlsi project titles
ECway Technologies provides IEEE projects and software development with offices across multiple cities in India. They offer 25 different 2013 IEEE VLSI project titles related to digital circuits, wireless communication, error correction, and signal processing. Project topics include glitch-free delay lines, low-power turbo decoders, multi-mode turbo/LDPC decoders, digital filters, asynchronous logic circuits, DSP architectures, ADCs, error correction for memories, random number generators, and low-power design techniques. ECway can be contacted through their website or phone numbers for more details on these projects.
2013 ieee ns2 project titles
This document lists 25 IEEE project titles from 2013 related to wireless networks and sensor networks. The projects cover topics such as capacity and delay optimization in wireless mesh networks, detection of spoofing attacks in wireless networks, distance bounding and location verification techniques, energy harvesting and management in sensor networks, traffic classification in networks, power allocation in cognitive radio networks, video multicast, target tracking in sensor networks, resource allocation in WiMAX networks, location management, channel allocation and routing, scheduling in body area networks, cross-layer congestion and power control, data collection for mobile users, estimation with delays, mobile relay configuration, distance bounding as a security solution, modeling wireless system architectures, exploiting contact patterns in delay tolerant networks, energy efficient resource management of
2013 ieee matlab project titles
ECWAY Technologies provides IEEE projects and software developments related to image processing, computer vision, and pattern recognition. They have offices in multiple cities in India. The document then lists 75 IEEE project titles from 2013 related to these topics, with many involving MATLAB. The projects cover areas like 3D reconstruction, image restoration, tracking, segmentation, watermarking, and more.
Software application projects
This document lists over 100 potential project titles for an MCA in Computer Science. The projects cover a wide range of topics and can be completed using languages like Java, ASP.NET, and C#. The document also provides contact information for ECWAY TECHNOLOGIES, a company that offers projects and software development based in multiple cities in India.
Et0077 fabrication of solar operated pneumatic reciprocating water pumping ...
This document appears to be a project report for the fabrication of a solar operated pneumatic reciprocating water pumping system. It includes chapters that describe the equipment used like the pneumatic cylinder, solenoid valves, air compressor, and control unit. It discusses the design, working principle, applications, materials list, and cost estimation. The objective is to pump water using minimal electric power generated from solar panels. Pneumatics is selected due to its simplicity and economy for automation. Compressed air is produced using a reciprocating air compressor.
Et0071 fabrication of pneumatic drill jig
This document describes the design and fabrication of a pneumatic drill jig. The jig uses compressed air to quickly and rigidly clamp components for drilling operations. It reduces labor time and increases accuracy and productivity compared to manual clamping. The jig has a piston that is pushed upward by compressed air to clamp the component between the jig plate and locator. Releasing the air closes the piston and releases the clamped component. This pneumatic clamping system allows for mass production of parts like motor covers and bearing caps.
Et0069 fabrication of multi nut tighter or remover
This document describes a system for automatically tightening or removing multiple nuts without human assistance. The system uses a motor that can be switched between forward and reverse rotation to either tighten or loosen nuts. A gear arrangement transfers the motor's rotation to a spanner that directly engages with the nuts. The motor receives power from a battery and an operator controls the direction of rotation to selectively tighten or remove nuts as needed.
Et0054 fabrication of four side pneauamtic lifting jack
This document describes a project to design and fabricate a four-sided pneumatic lifting jack. The lifting jack was developed to address difficulties in lifting light vehicles using manual jacks in automobile garages. It allows vehicles to be lifted smoothly without impact force using pressurized air and a solenoid valve controlled pneumatic cylinder. The lifting jack is designed to be simple and affordable to use in small and medium garages. It can lift vehicles easily with less manual effort compared to traditional jacks.
Et0028 design and fabrication of multi purpose design and fabrication of mu...
Ecway Technologies provides engineering projects and software development with offices across multiple cities in India. They design and fabricate multi-purpose V-type hydraulic angle forming machines. These machines use hydraulic power systems to transfer energy and apply force for metal forming operations that require heavy pressure, such as drawing and bending. The hydraulic drive allows large pressures to be applied to the ram. The pressure is transmitted equally throughout the system according to Pascal's law. The fabricated angular sheet forming machine uses a piston, cylinder, die, and clamp to shape metal sheets under applied hydraulic force. Hydraulic systems provide advantages of using low-cost energy and allowing intricate shapes but require periodic maintenance and costly accessories.
Et0022 design and fabrication of flexible fuel vehicle
ECway Technologies provides engineering projects and software development with offices in multiple cities in India. They specialize in the design and fabrication of flexible fuel vehicles (FFVs) that can run on gasoline blended with ethanol or methanol. FFVs have engines that can burn varying proportions of these fuel blends through automatic adjustment of fuel injection and spark timing. The document then provides details on the working principle of two-stroke engines and lists advantages of using liquefied petroleum gas (LPG) in dual fuel vehicles such as lower costs, reduced emissions, and extended engine life compared to gasoline.
Et0014 automatic side stand with break locking system
This document describes an automatic side stand and brake locking system for vehicles. The system uses an engine start sensor circuit to detect when the engine starts and send a signal to a timer circuit. The timer circuit then activates a relay driver circuit which controls motors that operate the side stand and brake locking mechanisms, automatically raising the side stand and engaging the brake lock when the engine is started. The block diagram shows the components of the system, including the engine start sensor, timer circuit, relay driver, DC motors, and side stand and brake locking mechanisms.
Et0011 automatic pneumatic bumper adjust mechanism
This document describes an automatic pneumatic bumper adjusting system that uses infrared sensors and pneumatic components. The system detects obstacles using an IR transmitter and receiver, then activates solenoid valves and pneumatic cylinders to adjust the position of the bumper. It can stop an oncoming vehicle and requires less human involvement than manual systems. The system has applications for automobiles and industries, providing advantages like lower cost, easier operation and installation, and avoiding wear issues compared to other designs. However, it does require additional upfront costs to implement the automation.
Et0007 automatic clutch & braking system
Ecway Technologies provides engineering projects and software development services out of multiple offices in India. They specialize in automatic clutch and braking systems for vehicles using microcontrollers. The system uses IR sensors to detect interruptions, a microcontroller for control based on programmed instructions, and relays connected to DC motors to automatically engage the clutch and brakes. The advantages are simple maintenance, improved safety, and low cost, while the disadvantages are higher initial costs and needing an air tank.
Wireless sensor network for multi storey building design and implementation
Wireless sensor networks are a potential solution for home automation due to their reliability, low cost and low power usage. This paper describes the design and implementation of a wireless sensor network to control and monitor systems in a multi-storey building. The network was developed using Microchip ZigBee and installed in a building at the International University to evaluate its performance in a multi-storey environment.
Wireless access control system based on ieee 802.15.4
This document describes a wireless access control system that uses ZigBee and image processing to control a door lock in a smart home environment. The system includes a ZigBee-enabled door lock module that was designed and developed. The paper also analyzes image transfer over the ZigBee network for different image sizes and discusses challenges involved in the face recognition module.
Towards the implementation of iot for environmental condition monitoring in h...
The document proposes an Internet of Things system using low-cost sensors to monitor domestic environmental conditions like temperature and humidity. It describes the integrated network architecture that connects smart sensors to measure parameters and transmit the data via the internet. The system uses machine learning to provide self-control of the monitoring devices and was found to reliably transmit sensor information 97% of the time based on prototype testing.
The ultrasonic distance alarm system based on msp430 f449
The document describes an ultrasonic distance alarm system designed using a Texas Instruments MSP430F449 microcontroller and TCT40-16F ultrasonic sensor. The system uses the MJ echo capture method to accurately measure distances in real-time and display them on an LCD screen. It will also immediately alarm if an object gets closer than a preset distance threshold. The system improves accuracy further by using a temperature sensor for temperature compensation of the ultrasonic measurements, making it suitable for distance monitoring applications in vehicles.
Scaling energy per operation via an asynchronous pipeline
This document discusses statistical analysis showing a sharp reduction in the rate of energy efficiency improvements in processors over the last 30 years, forming an "asymptotic wall". The authors developed an energy model for asynchronous systems that accounts for scaling realities. Studies of an energy efficient asynchronous pipeline fabricated in 0.6 μm at sub-threshold showed 17 Giga Operations per Joule when fully pipelined, and simulations in a more modern 65 nm process projected a further order of magnitude improvement.
More from Ecway Technologies (20)
Et0077 fabrication of solar operated pneumatic reciprocating water pumping ...
Et0077 fabrication of solar operated pneumatic reciprocating water pumping ...
Et0069 fabrication of multi nut tighter or remover
Et0069 fabrication of multi nut tighter or remover
Et0054 fabrication of four side pneauamtic lifting jack
Et0054 fabrication of four side pneauamtic lifting jack
Et0028 design and fabrication of multi purpose design and fabrication of mu...
Et0028 design and fabrication of multi purpose design and fabrication of mu...
Et0022 design and fabrication of flexible fuel vehicle
Et0022 design and fabrication of flexible fuel vehicle
Et0014 automatic side stand with break locking system
Et0014 automatic side stand with break locking system
Et0011 automatic pneumatic bumper adjust mechanism
Et0011 automatic pneumatic bumper adjust mechanism
Wireless sensor network for multi storey building design and implementation
Wireless sensor network for multi storey building design and implementation
Wireless access control system based on ieee 802.15.4
Wireless access control system based on ieee 802.15.4
Towards the implementation of iot for environmental condition monitoring in h...
Towards the implementation of iot for environmental condition monitoring in h...
The ultrasonic distance alarm system based on msp430 f449
The ultrasonic distance alarm system based on msp430 f449
Scaling energy per operation via an asynchronous pipeline
Scaling energy per operation via an asynchronous pipeline
Design and development of pic microcontroller based vehicle monitoring system using controller area network (can) protocol
- 1. DESIGN AND DEVELOPMENT OF PIC ICROCONTROLLER BASED VEHICLE MONITORING SYSTEM USING CONTROLLER AREA NETWORK (CAN) PROTOCOL ABSTRACT: Controller Area Network (CAN) is an attractive alternative in the automotive and automation industries due to its ease in use, low cost and provided reduction in wiring complexity. It was developed by Robert Bosch for communication between various digital devices inside an automobile where heavy electrical interferences and mechanical vibrations are present. This project is aimed at the implementation of CAN protocol using PIC for vehicle monitoring system. The main feature of the system includes monitoring of various vehicle parameters such as Temperature, presence of CO level in the exhaust, Battery Voltage and Light due to spark or fire. The software part is done in MPLab IDE using Embedded C. Schematic is prepared using OrCAD. Hardware is implemented and software porting is done.