Availability of Mobile Augmented Reality System for Urban Landscape SimulationTomohiro Fukuda
This slide is presented in CDVE2012 (The 9th International Conference on Cooperative Design, Visualization, and Engineering).
Abstract. This research presents the availability of a landscape simulation method for a mobile AR (Augmented Reality), comparing it with photo montage and VR (Virtual Reality) which are the main existing methods. After a pilot experiment with 28 subjects in Kobe city, a questionnaire about three landscape simulation methods was implemented. In the results of the questionnaire, the mobile AR method was well evaluated for reproducibility of a landscape, operability, and cost. An evaluation rated as better than equivalent was obtained in comparison with the existing methods. The suitability of mobile augmented reality for landscape simulation was found to be high.
SOAR: SENSOR ORIENTED MOBILE AUGMENTED REALITY FOR URBAN LANDSCAPE ASSESSMENTTomohiro Fukuda
This slide is presented in CAADRIA2012 (The 17th International Conference on Computer Aided Architectural Design Research in Asia).
Abstract. This research presents the development of a sensor oriented mobile AR system which realizes geometric consistency using GPS, a gyroscope and a video camera which are mounted in a smartphone for urban landscape assessment. A low cost AR system with high flexibility is realized. Consistency of the viewing angle of a video camera and a CG virtual camera, and geometric consistency between a video image and 3DCG are verified. In conclusion, the proposed system was evaluated as feasible and effective.
Integration of a Structure from Motion into Virtual and Augmented Reality for...Tomohiro Fukuda
Proceedings (Full paper reviewed)
Tomohiro Fukuda, Hideki Nada, Haruo Adachi, Shunta Shimizu, Chikako Takei, Yusuke Sato, Nobuyoshi Yabuki, and Ali Motamedi: 2017, Integration of a Structure from Motion into Virtual and Augmented Reality for Architectural and Urban Simulation: Demonstrated in Real Architectural and Urban Projects, Future Trajectories of Computation in Design: 17th International Conference CAAD Futures 2017, p.596, 2017.7
Book (Book contribution)
Tomohiro Fukuda, Hideki Nada, Haruo Adachi, Shunta Shimizu, Chikako Takei, Yusuke Sato, Nobuyoshi Yabuki, and Ali Motamedi: 2017, Integration of a Structure from Motion into Virtual and Augmented Reality for Architectural and Urban Simulation: Demonstrated in Real Architectural and Urban Projects, Computer-Aided Architectural Design - Future Trajectories,pp.60-77,Springer (Communications in Computer and Information Science 724), ISSN 1865-0929,ISBN 978-981-10-5196-8,2017.7
Computational visual simulations are extremely useful and powerful tools for decision-making. The use of virtual and augmented reality (VR/AR) has become a common phenomenon due to real-time and interactive visual simulation tools in architectural and urban design studies and presentations. In this study, a demonstration is performed to integrate structure from motion (SfM) into VR and AR. A 3D modeling method is explored by SfM under real-time rendering as a solution for the modeling cost in large-scale VR. The study examines the application of camera parameters of SfM to realize an appropriate registration and tracking accuracy in marker-less AR to visualize full-scale design projects on a planned construction site. The proposed approach is applied to plural real architectural and urban design projects, and results indicate the feasibility and effectiveness of the proposed approach.
Availability of Mobile Augmented Reality System for Urban Landscape SimulationTomohiro Fukuda
This slide is presented in CDVE2012 (The 9th International Conference on Cooperative Design, Visualization, and Engineering).
Abstract. This research presents the availability of a landscape simulation method for a mobile AR (Augmented Reality), comparing it with photo montage and VR (Virtual Reality) which are the main existing methods. After a pilot experiment with 28 subjects in Kobe city, a questionnaire about three landscape simulation methods was implemented. In the results of the questionnaire, the mobile AR method was well evaluated for reproducibility of a landscape, operability, and cost. An evaluation rated as better than equivalent was obtained in comparison with the existing methods. The suitability of mobile augmented reality for landscape simulation was found to be high.
SOAR: SENSOR ORIENTED MOBILE AUGMENTED REALITY FOR URBAN LANDSCAPE ASSESSMENTTomohiro Fukuda
This slide is presented in CAADRIA2012 (The 17th International Conference on Computer Aided Architectural Design Research in Asia).
Abstract. This research presents the development of a sensor oriented mobile AR system which realizes geometric consistency using GPS, a gyroscope and a video camera which are mounted in a smartphone for urban landscape assessment. A low cost AR system with high flexibility is realized. Consistency of the viewing angle of a video camera and a CG virtual camera, and geometric consistency between a video image and 3DCG are verified. In conclusion, the proposed system was evaluated as feasible and effective.
Integration of a Structure from Motion into Virtual and Augmented Reality for...Tomohiro Fukuda
Proceedings (Full paper reviewed)
Tomohiro Fukuda, Hideki Nada, Haruo Adachi, Shunta Shimizu, Chikako Takei, Yusuke Sato, Nobuyoshi Yabuki, and Ali Motamedi: 2017, Integration of a Structure from Motion into Virtual and Augmented Reality for Architectural and Urban Simulation: Demonstrated in Real Architectural and Urban Projects, Future Trajectories of Computation in Design: 17th International Conference CAAD Futures 2017, p.596, 2017.7
Book (Book contribution)
Tomohiro Fukuda, Hideki Nada, Haruo Adachi, Shunta Shimizu, Chikako Takei, Yusuke Sato, Nobuyoshi Yabuki, and Ali Motamedi: 2017, Integration of a Structure from Motion into Virtual and Augmented Reality for Architectural and Urban Simulation: Demonstrated in Real Architectural and Urban Projects, Computer-Aided Architectural Design - Future Trajectories,pp.60-77,Springer (Communications in Computer and Information Science 724), ISSN 1865-0929,ISBN 978-981-10-5196-8,2017.7
Computational visual simulations are extremely useful and powerful tools for decision-making. The use of virtual and augmented reality (VR/AR) has become a common phenomenon due to real-time and interactive visual simulation tools in architectural and urban design studies and presentations. In this study, a demonstration is performed to integrate structure from motion (SfM) into VR and AR. A 3D modeling method is explored by SfM under real-time rendering as a solution for the modeling cost in large-scale VR. The study examines the application of camera parameters of SfM to realize an appropriate registration and tracking accuracy in marker-less AR to visualize full-scale design projects on a planned construction site. The proposed approach is applied to plural real architectural and urban design projects, and results indicate the feasibility and effectiveness of the proposed approach.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A STUDY OF VARIATION OF NORMAL OF POLY-GONS CREATED BY POINT CLOUD DATA FOR A...Tomohiro Fukuda
This slide is presented in CAADRIA2011 (The 16th International Conference on Computer Aided Architectural Design Research in Asia).
Abstracts: Acquiring current 3D space data of cities, buildings, and rooms rapidly and in detail has become indispensable. When the point cloud data of an object or space scanned by a 3D laser scanner is converted into polygons, it is an accumulation of small polygons. When object or space is a closed flat plane, it is necessary to merge small polygons to reduce the volume of data, and to convert them into one polygon. When an object or space is a closed flat plane, each normal vector of small polygons theoretically has the same angle. However, in practise, these angles are not the same. Therefore, the purpose of this study is to clarify the variation of the angle of a small polygon group that should become one polygon based on actual data. As a result of experimentation, no small polygons are converted by the point cloud data scanned with the 3D laser scanner even if the group of small polygons is a closed flat plane lying in the same plane. When the standard deviation of the extracted number of polygons is assumed to be less than 100, the variation of the angle of the normal vector is roughly 7 degrees.
GOAR: GIS Oriented Mobile Augmented Reality for Urban Landscape AssessmentTomohiro Fukuda
This slide is presented in CMC2012 (2012 4th International Conference on
Communications, Mobility, and Computing).
Abstract. This research presents the development of a mobile AR system which realizes geometric consistency
using GIS, a gyroscope and a video camera which are mounted in a smartphone for urban landscape assessment. A low cost AR system with high flexibility is developed.
Geometric consistency between a video image and 3DCG are verified. In conclusion, the proposed system was evaluated as feasible and effective.
DISTRIBUTED AND SYNCHRONISED VR MEETING USING CLOUD COMPUTING: Availability a...Tomohiro Fukuda
This slide is presented in CAADRIA2012 (The 17th International Conference on Computer Aided Architectural Design Research in Asia).
Abstract. The mobility of people's activities, and cloud computing technologies are becoming advanced in the modern age of information and globalisation. This study describes the availability of discussing spatial design while sharing a 3-dimensional virtual space with stakeholders in a distributed and synchronised environment. First of all, a townscape design support system based on a cloud computing type VR system is constructed. Next, an experiment of a distributed and synchronised discussion of townscape design is executed with subjects who are specialists in the townscape design field. After the experiment, both qualitative mental evaluation and quantitative evaluation were carried out. The conclusions are as follows: 1. Users who use VR frequently and who use videoconferencing consider that the difference with face-to-face discussion is small. 2. A Moiré pattern may occur in a gradation picture. 3. The availability of distributed and synchronised discussions with cloud computing type VR is high.
CAAD FUTURES 2015: Development of High-definition Virtual Reality for Histo...Tomohiro Fukuda
This slide is our research presentation in the 16th CAAD Futures 2015 Conference, at MASP, Sao Paulo, Brazil.
Keywords: Cultural heritage, digital reconstruction, Virtual Reality, visualization, 3D modeling, presentation.
Abstract: This study shows fundamental data for constructing a high-definition VR application under the theme of a three-dimensional visualization to restore past architecture and cities. It is difficult for widespread architectural and urban objects to be rendered in real-time. Thus, in this study, techniques for improving the level of detail (LOD) and representation of natural objects were studied. A digital reconstruction project of Azuchi Castle and old castle town was targeted as a case study. Finally, a VR application with specifications of seven million polygons, texture of 1.87 billion pixels, and 1920 × 1080 screen resolution, was successfully developed that could run on a PC. For the developed VR applications, both qualitative evaluation by experts and quantitative evaluation by end users was performed.
Digital 3D imaging can benefit from advances in VLSI technology in order to accelerate its deployment in many fields like visual communication and industrial automation. High-resolution 3D images can be acquired using laser-based vision systems. With this approach, the 3D information becomes relatively insensitive to background illumination and surface texture. Complete images of visible surfaces that are rather featureless to the human eye or a video camera can be generated. Intelligent digitizers will be capable of measuring accurately and simultaneously color and 3D.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A STUDY OF VARIATION OF NORMAL OF POLY-GONS CREATED BY POINT CLOUD DATA FOR A...Tomohiro Fukuda
This slide is presented in CAADRIA2011 (The 16th International Conference on Computer Aided Architectural Design Research in Asia).
Abstracts: Acquiring current 3D space data of cities, buildings, and rooms rapidly and in detail has become indispensable. When the point cloud data of an object or space scanned by a 3D laser scanner is converted into polygons, it is an accumulation of small polygons. When object or space is a closed flat plane, it is necessary to merge small polygons to reduce the volume of data, and to convert them into one polygon. When an object or space is a closed flat plane, each normal vector of small polygons theoretically has the same angle. However, in practise, these angles are not the same. Therefore, the purpose of this study is to clarify the variation of the angle of a small polygon group that should become one polygon based on actual data. As a result of experimentation, no small polygons are converted by the point cloud data scanned with the 3D laser scanner even if the group of small polygons is a closed flat plane lying in the same plane. When the standard deviation of the extracted number of polygons is assumed to be less than 100, the variation of the angle of the normal vector is roughly 7 degrees.
GOAR: GIS Oriented Mobile Augmented Reality for Urban Landscape AssessmentTomohiro Fukuda
This slide is presented in CMC2012 (2012 4th International Conference on
Communications, Mobility, and Computing).
Abstract. This research presents the development of a mobile AR system which realizes geometric consistency
using GIS, a gyroscope and a video camera which are mounted in a smartphone for urban landscape assessment. A low cost AR system with high flexibility is developed.
Geometric consistency between a video image and 3DCG are verified. In conclusion, the proposed system was evaluated as feasible and effective.
DISTRIBUTED AND SYNCHRONISED VR MEETING USING CLOUD COMPUTING: Availability a...Tomohiro Fukuda
This slide is presented in CAADRIA2012 (The 17th International Conference on Computer Aided Architectural Design Research in Asia).
Abstract. The mobility of people's activities, and cloud computing technologies are becoming advanced in the modern age of information and globalisation. This study describes the availability of discussing spatial design while sharing a 3-dimensional virtual space with stakeholders in a distributed and synchronised environment. First of all, a townscape design support system based on a cloud computing type VR system is constructed. Next, an experiment of a distributed and synchronised discussion of townscape design is executed with subjects who are specialists in the townscape design field. After the experiment, both qualitative mental evaluation and quantitative evaluation were carried out. The conclusions are as follows: 1. Users who use VR frequently and who use videoconferencing consider that the difference with face-to-face discussion is small. 2. A Moiré pattern may occur in a gradation picture. 3. The availability of distributed and synchronised discussions with cloud computing type VR is high.
CAAD FUTURES 2015: Development of High-definition Virtual Reality for Histo...Tomohiro Fukuda
This slide is our research presentation in the 16th CAAD Futures 2015 Conference, at MASP, Sao Paulo, Brazil.
Keywords: Cultural heritage, digital reconstruction, Virtual Reality, visualization, 3D modeling, presentation.
Abstract: This study shows fundamental data for constructing a high-definition VR application under the theme of a three-dimensional visualization to restore past architecture and cities. It is difficult for widespread architectural and urban objects to be rendered in real-time. Thus, in this study, techniques for improving the level of detail (LOD) and representation of natural objects were studied. A digital reconstruction project of Azuchi Castle and old castle town was targeted as a case study. Finally, a VR application with specifications of seven million polygons, texture of 1.87 billion pixels, and 1920 × 1080 screen resolution, was successfully developed that could run on a PC. For the developed VR applications, both qualitative evaluation by experts and quantitative evaluation by end users was performed.
Digital 3D imaging can benefit from advances in VLSI technology in order to accelerate its deployment in many fields like visual communication and industrial automation. High-resolution 3D images can be acquired using laser-based vision systems. With this approach, the 3D information becomes relatively insensitive to background illumination and surface texture. Complete images of visible surfaces that are rather featureless to the human eye or a video camera can be generated. Intelligent digitizers will be capable of measuring accurately and simultaneously color and 3D.
MATLAB Completed IEEE projects list are here. All this listed MATLAB IEEE Projects are 100% completed projects. More Details call: 9884848198 (S3 Infotech IEEE Projects).
We offering Projects for EEE Projects, ECE Projects, CSE Projects, IT Projects for Students. We developing projects in all technologies like Dotnet, Java, MATLAB, VLSI, Embedded systems, NS2 & Hadoop bigdata technologies.
More Details call : +91 9884848198
S3 Infotech IEEE Projects
10/1, Jones Road,
Saidapet,
Chennai-600015
www.s3computes.com
Here is the list of DSP/DIP, Signal Processing and Communication for B.Tech ECE final year students. You can download it here and for any queries call me @ +91 9603999243
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
When stars align: studies in data quality, knowledge graphs, and machine lear...
2013 ieee matlab project titles
1. ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
Visit: www.ecwayprojects.com Mail to: ecwaytechnologies@gmail.com
S.N.
2013 IEEE PROJECT TITLES *** [MATLAB]
1.
A Hybrid Multiview Stereo Algorithm for Modeling Urban Scenes
2.
Accelerated Edge-Preserving Image Restoration Without Boundary Artifacts
3.
Accurate Multiple View 3D Reconstruction Using Patch-Based Stereo for Large-Scale Scenes
4.
Action Recognition from Video Using Feature Covariance Matrices
5.
Active Contour-Based Visual Tracking by Integrating Colors, Shapes, and Motions
6.
Automatic Dynamic Texture Segmentation Using Local Descriptors and Optical Flow
7.
Automatic License Plate Recognition (ALPR) A State-of-the-Art Review
8.
Casual Stereoscopic Photo Authoring
9.
Compressive Framework for Demosaicing of Natural Images
10.
Context-Based Hierarchical Unequal Merging for SAR Image Segmentation
11.
Discrete Wavelet Transform and Data Expansion Reduction in Homomorphic Encrypted Domain
12.
Efficient Contrast Enhancement Using Adaptive Gamma Correction With Weighting Distribution
13.
Exploring Visual and Motion Saliency for Automatic Video Object Extraction
14.
Gaussian Blurring-Invariant Comparison of Signals and Images
15.
General Framework to Histogram-Shifting-Based Reversible Data Hiding
2. 16.
Hierarchical Super-Resolution-Based Inpainting
17.
Image Processing Using Smooth Ordering of its Patches
18.
Image Size Invariant Visual Cryptography for General Access Structures Subject to Display Quality
Constraints
19.
Image-Difference Prediction From Grayscale to Color
20.
Interactive Segmentation for Change Detection in Multispectral Remote-Sensing Images
21.
Latent Fingerprint Matching Using Descriptor-Based Hough Transform
22.
LDFT-Based Watermarking Resilient to Local Desynchronization Attacks
23.
Linear Distance Coding for Image Classification
24.
LLSURE Local Linear SURE-Based Edge-Preserving Image Filtering
25.
Local Directional Number Pattern for Face Analysis Face and Expression Recognition
26.
Motion-Aware Gradient Domain Video Composition
27.
Multiview Hessian Regularization for Image Annotation
28.
Noise Reduction Based on Partial-Reference, Dual-Tree Complex Wavelet Transform Shrinkage
29.
Nonedge-Specific Adaptive Scheme for Highly Robust Blind Motion Deblurring of Natural Imagess
30.
Nonlinearity Detection in Hyperspectral Images Using a Polynomial Post-Nonlinear Mixing Model
31.
Nonlocal Transform-Domain Filter for Volumetric Data Denoising and Reconstruction
32.
Optimized 3D Watermarking for Minimal Surface Distortion
33.
Pose-Invariant Face Recognition Using Markov Random Fields
34.
Probabilistic Graphlet Transfer for Photo Cropping
35.
QoE-Based Multi-Exposure Fusion in Hierarchical Multivariate Gaussian CRF
36.
Query-Adaptive Image Search With Hash Codes
37.
Regional Spatially Adaptive Total Variation Super-Resolution With Spatial Information Filtering and
Clustering
3. 38.
Regularized Discriminative Spectral Regression Method for Heterogeneous Face Matching
39.
Reversible Data Hiding in Encrypted Images by Reserving Room Before Encryption
40.
Reversible Data Hiding With Optimal Value Transfer
41.
Reversible Watermarking Based on Invariant Image Classification and Dynamic Histogram Shifting
42.
Rich Intrinsic Image Decomposition of outdoor scenes from multiple views
43.
Robust Face Recognition for Uncontrolled Pose and Illumination Changes
44.
Robust Model for Segmenting Images WithWithout Intensity Inhomogeneities
45.
Robust Radial Face Detection for Omnidirectional Vision
46.
Scene Text Detection via Connected Component Clustering and Nontext Filtering
47.
Segment Adaptive Gradient Angle Interpolation
48.
Shape Sparse Representation for Joint Object Classification and Segmentation
49.
Track Creation and Deletion Framework for Long-Term Online Multiface Tracking
50.
Visually Lossless Encoding For JPEG2000
51.
2-D Wavelet Packet Spectrum for Texture Analysis
52.
A Watermarking Based Medical Image Integrity Control System and an Image Moment Signature for
Tampering Characterization
53.
Action Search by Example Using Randomized Visual Vocabularies
54.
Airborne Vehicle Detection in Dense Urban Areas Using HoG Features and Disparity Maps
55.
Automatic Detection and Reconstruction of Building Radar Footprints From Single VHR SAR Images
56.
Efficient Image Classification via Multiple Rank Regression
57.
Exposing Digital Image Forgeries by Illumination Color Classification
58.
Global Propagation of Affine Invariant Features for Robust Matching
59.
Image Enhancement Using the Hypothesis Selection Filter Theory and Application to JPEG Decoding
4. 60.
Log-Gabor Filters for Image-Based Vehicle Verification
61.
Mining Interaction Patterns among Brain Regions by Clustering
62.
Motion Analysis Using 3D High-Resolution Frequency Analysis
63.
Multiple-Kernel, Multiple-Instance Similarity Features for Efficient Visual Object Detection
64.
Noise Reduction Based on Partial-Reference Dual-Tree Complex Wavelet Transform Shrinkage
65.
Revealing the Traces of JPEG Compression Anti-Forensics
66.
Robust Face Representation Using Hybrid Spatial Feature Interdependence Matrix
67.
Robust Hashing for Image Authentication Using Zernike Moments and Local Features
68.
Scalable Face Image Retrieval Using Attribute-Enhanced Sparse Codewords
69.
Secure Watermarking for Multimedia Content Protection
70.
Segmented Gray-Code Kernels for Fast Pattern Matching
71.
Flip-Invariant SIFT for Copy and Object Detection
72.
Multi-Atlas Segmentation with Joint Label Fusion
73.
Asymmetric Correlation: A Noise Robust Similarity Measure for Template Matching
74.
Learning Prototype Hyperplanes for Face Verification in the Wild
75.
Separable Markov Random Field Model and Its Applications in Low Level Vision