Describe what happens to water molecules in solution Describe w.pdf
•
0 likes•2 views
Describe what happens to water molecules in solution Describe what happens to water molecules in solution Solution A water molecules contain two oxygen atoms and one hydrogen atom. Since the oxygen atom is partially electro-negative and hydrogen atom is partially electro-positive in nature, the water molecules get partially charged with positive and negative charges. This distribution of charges on water atoms formulates the basis for dissolution of various solutes and formation of hydrogen bonds in water. When water is added to a solution or any hydrophilic solute is added to water, the distribution of partial charges on the water molecule disperses the solute into different ionic states and forms hydrogen bonds with the solute. This constant formation of hydrogen bonds of water molecules with the solute helps in dissolution of solute and maintain fluid state of water. Depending upon the nature of solute, the dissolution can be endothermic, exothermic or athermic in nature. However, heating of water leads to increase in randomness of water molecules thus increasing solubility of solutes in water. Thus, dissolution of solute and behaviour of water depends upon the nature of solute and physical properties of water and solute along with external factors such as temperature etc..
Report
Share
Report
Share
Download to read offline
Recommended
4043247.ppt biochemistry of water & electrolyte
This document provides an overview of key concepts regarding water and its importance in biochemistry. It discusses water's unique physical and chemical properties, including its molecular structure and ability to form hydrogen bonds. This allows water to have high boiling and melting points and act as a universal solvent. The document also covers water's roles as a solvent, including hydrophilic and hydrophobic interactions. It describes noncovalent bonds like ionic interactions, hydrogen bonds, and van der Waals forces that are important for molecular interactions in water. Key properties of water like its thermal properties, osmotic pressure, and role in acid-base reactions are also summarized.
IB Biology 2.2 Slides: Water
Water's unique properties are due to its polar nature and ability to form hydrogen bonds between molecules. This allows water to have high cohesive and adhesive forces, giving it properties like surface tension and capillary action. Its polarity also allows water to be an excellent solvent. Water has a high specific heat capacity and heat of vaporization due to the energy required to break hydrogen bonds, giving it high thermal buffering abilities. Substances can be hydrophilic (water-loving) if polar or ionic, allowing dissolution, or hydrophobic. In the body, glucose and ions are water soluble and transported in blood plasma, while fats and gases require transport via other mechanisms due to low solubility. Water's properties make it perfectly
CVA Biology I - B10vrv1022
This document discusses the unique properties of water that make it essential for life. Water is a polar molecule that can form hydrogen bonds between oxygen and hydrogen atoms of neighboring water molecules. This allows water to have high cohesion and surface tension as well as be an excellent solvent. Water's polarity and hydrogen bonding give it a high heat capacity, allowing it to absorb large amounts of heat with minimal temperature changes. These properties are critical for living organisms and allow water to act as a universal solvent for biological molecules and reactions.
Water
Water is essential for life due to its unique properties. It is highly polar and able to form hydrogen bonds. This allows water to dissolve polar biomolecules and ions. Water also interacts with dissolved substances through hydrogen bonding and electrostatic interactions. These interactions give biomolecules their structure and allow biological processes to occur in aqueous environments. The hydrogen bonding of water gives it high heat of vaporization and surface tension, properties which influence solubility and phase changes of dissolved substances.
Structure and properties of water
Water is a polar molecule comprised of an oxygen atom covalently bonded to two hydrogen atoms at an angle of 104.5 degrees. This polar structure results in slightly positive and negative charges on opposite sides of the molecule. Water molecules can form hydrogen bonds between the slightly positive hydrogen of one molecule and the slightly negative oxygen of another. These hydrogen bonds give water important properties like surface tension, capillary action, and allowing it to dissolve many other polar substances. Water can also exist as a liquid, solid (ice), and gas (water vapor) and plays a vital role in all living things.
Structure and properties of water and chemical properties of water
This topic focuses on properties of water in the field of chemistry
Bt 202 water
This document provides an overview of biochemistry by discussing the properties of water and its importance for life. It notes that water is a polar molecule that can form hydrogen bonds, giving it unique properties like high heat capacity and surface tension. These hydrogen bonds allow water to dissolve many polar substances. Water's hydrogen bonding and ability to dissolve biomolecules make it essential as the universal solvent for living organisms. The document also briefly discusses solutions, solutes, solvents, and how water interacts with charged and nonpolar compounds.
Lecture_Water.pptx
Water is a polar molecule due to its structure of two hydrogen atoms covalently bonded to one oxygen atom. This polarity allows water to form hydrogen bonds with other water molecules, giving water unique properties. Water's high heat of vaporization and specific heat allow organisms to regulate temperature through evaporative cooling and heat absorption. Water's polarity also makes it an excellent solvent and gives it properties like cohesion, adhesion, and the ability to dissolve ionic compounds.
Recommended
4043247.ppt biochemistry of water & electrolyte
This document provides an overview of key concepts regarding water and its importance in biochemistry. It discusses water's unique physical and chemical properties, including its molecular structure and ability to form hydrogen bonds. This allows water to have high boiling and melting points and act as a universal solvent. The document also covers water's roles as a solvent, including hydrophilic and hydrophobic interactions. It describes noncovalent bonds like ionic interactions, hydrogen bonds, and van der Waals forces that are important for molecular interactions in water. Key properties of water like its thermal properties, osmotic pressure, and role in acid-base reactions are also summarized.
IB Biology 2.2 Slides: Water
Water's unique properties are due to its polar nature and ability to form hydrogen bonds between molecules. This allows water to have high cohesive and adhesive forces, giving it properties like surface tension and capillary action. Its polarity also allows water to be an excellent solvent. Water has a high specific heat capacity and heat of vaporization due to the energy required to break hydrogen bonds, giving it high thermal buffering abilities. Substances can be hydrophilic (water-loving) if polar or ionic, allowing dissolution, or hydrophobic. In the body, glucose and ions are water soluble and transported in blood plasma, while fats and gases require transport via other mechanisms due to low solubility. Water's properties make it perfectly
CVA Biology I - B10vrv1022
This document discusses the unique properties of water that make it essential for life. Water is a polar molecule that can form hydrogen bonds between oxygen and hydrogen atoms of neighboring water molecules. This allows water to have high cohesion and surface tension as well as be an excellent solvent. Water's polarity and hydrogen bonding give it a high heat capacity, allowing it to absorb large amounts of heat with minimal temperature changes. These properties are critical for living organisms and allow water to act as a universal solvent for biological molecules and reactions.
Water
Water is essential for life due to its unique properties. It is highly polar and able to form hydrogen bonds. This allows water to dissolve polar biomolecules and ions. Water also interacts with dissolved substances through hydrogen bonding and electrostatic interactions. These interactions give biomolecules their structure and allow biological processes to occur in aqueous environments. The hydrogen bonding of water gives it high heat of vaporization and surface tension, properties which influence solubility and phase changes of dissolved substances.
Structure and properties of water
Water is a polar molecule comprised of an oxygen atom covalently bonded to two hydrogen atoms at an angle of 104.5 degrees. This polar structure results in slightly positive and negative charges on opposite sides of the molecule. Water molecules can form hydrogen bonds between the slightly positive hydrogen of one molecule and the slightly negative oxygen of another. These hydrogen bonds give water important properties like surface tension, capillary action, and allowing it to dissolve many other polar substances. Water can also exist as a liquid, solid (ice), and gas (water vapor) and plays a vital role in all living things.
Structure and properties of water and chemical properties of water
This topic focuses on properties of water in the field of chemistry
Bt 202 water
This document provides an overview of biochemistry by discussing the properties of water and its importance for life. It notes that water is a polar molecule that can form hydrogen bonds, giving it unique properties like high heat capacity and surface tension. These hydrogen bonds allow water to dissolve many polar substances. Water's hydrogen bonding and ability to dissolve biomolecules make it essential as the universal solvent for living organisms. The document also briefly discusses solutions, solutes, solvents, and how water interacts with charged and nonpolar compounds.
Lecture_Water.pptx
Water is a polar molecule due to its structure of two hydrogen atoms covalently bonded to one oxygen atom. This polarity allows water to form hydrogen bonds with other water molecules, giving water unique properties. Water's high heat of vaporization and specific heat allow organisms to regulate temperature through evaporative cooling and heat absorption. Water's polarity also makes it an excellent solvent and gives it properties like cohesion, adhesion, and the ability to dissolve ionic compounds.
Ap biology 3 water and life
The document discusses several key properties of water that contribute to Earth's suitability for life. It explains that water's polar covalent bonds allow it to form hydrogen bonds between molecules. These hydrogen bonds give water properties like cohesion, the ability to moderate temperature through heat absorption and evaporative cooling, and being a universal solvent. The document also discusses how acids and bases affect pH and buffering in aqueous solutions.
Water and p h
Water makes up 65-70% of the human body. It has unique properties like high melting and boiling points due to hydrogen bonding between water molecules. The bent shape of water molecules gives them a partial positive and negative charge, allowing them to form hydrogen bonds with other water molecules. These bonds contribute to water's high heat capacity and heat of vaporization. Water's pH measures the concentration of hydronium ions, with values below 7 indicating acidity and above 7 indicating alkalinity. pH is important in biological and chemical systems and can be measured using indicators, meters, and the Henderson-Hasselbalch equation.
BIOCHEMICAL PROPERTIES OF WATER .Raveesh.pptx
Water has unique properties like polarity, hydrogen bonding, and anomalous behavior that arise from its molecular structure and allow it to act as the universal solvent for biological molecules and reactions. Its ability to ionize and act as both an acid and base through donation or acceptance of protons enables water to buffer pH changes and participate in metabolic pathways. The high heat of vaporization and specific heat of water also make it essential for regulating temperatures in living organisms.
Physicochemical properties of water
This document provides an overview of the chemical properties of water. It begins by defining water as H2O, with two hydrogen atoms bonded to one oxygen atom. It then discusses several key points about water: it acts as an important solvent in biological processes; it is a key reactant in many reactions; it is oxidized in photosynthesis; and makes up 70% or more of living organisms. The document also covers the structure of the water molecule, its physical properties including being colorless/tasteless and having a high heat of vaporization, and its chemical properties such as being amphoteric and a universal solvent.
Biology GradeTen Unit Three Short Note For Students
The document discusses biochemical molecules that make up the human body, which are divided into inorganic and organic molecules. Inorganic molecules do not contain carbon and hydrogen, while organic molecules are made up of carbon and hydrogen. Water is an important inorganic molecule that has unique properties like being a solvent, having a high heat capacity and heat of vaporization, and influencing freezing and boiling points. These properties are important for sustaining life. The document also discusses important inorganic ions in the body like hydrogen and sodium ions and their roles in biological processes.
Water
Water has a simple molecular structure composed of one oxygen atom covalently bonded to two hydrogen atoms. This gives water a polar molecular structure with partial positive charges near the hydrogen atoms and a partial negative charge near the oxygen atom. This polarity allows water to dissolve ionic compounds through electrostatic interactions between the ions and polar water molecules but not non-polar covalent compounds which do not interact strongly with water. Heavy water, composed of deuterium and oxygen, is produced through electrolysis or distillation of ordinary water. It has similar but not identical chemical properties as ordinary water and is used as a neutron moderator and to produce deuterium.
Water
Water has a simple molecular structure composed of one oxygen atom covalently bonded to two hydrogen atoms. This gives water a polar molecular structure with partial positive charges near the hydrogen atoms and a partial negative charge near the oxygen atom. This polarity allows water to dissolve ionic compounds through electrostatic interactions between the ions and polar water molecules, but not non-polar covalent compounds which do not interact strongly with water. Heavy water, composed of deuterium instead of hydrogen, is used as a neutron moderator in nuclear reactions and to produce deuterium through electrolysis or reaction with metals.
Lesson 7 WATER.pdf
Water is essential for life and makes up over 70% of the human body. It has unique chemical properties, including being polar and able to form hydrogen bonds, which allow it to moderate temperature, act as a solvent for biochemical reactions, and maintain homeostasis. The body maintains water balance through carefully regulating water intake from foods and fluids and output through urine, feces, sweat, the lungs and skin. Electrolyte balance is also important for homeostasis and involves balancing the amounts of electrolytes like sodium, potassium, calcium and magnesium that enter and leave the body.
Lesson 7 WATER.pptx
Water is essential for life and makes up over 70% of the human body. It is a polar molecule that can form hydrogen bonds between neighboring molecules. This property allows water to moderate temperature, act as a solvent for biochemical reactions, and maintain homeostasis. Water balance is regulated by controlling both intake from drinking and foods and output through urine, feces, sweat, the lungs, and skin. Electrolyte balance also must be maintained as the body gains and loses ions.
properties of water.ppt for grade 9 high school
The document discusses isotopes, radioactive isotopes, and radiometric dating. It defines isotopes as atoms of the same element that vary only in the number of neutrons. Chemically, isotopes of the same element are identical. Some isotopes are radioactive and decay at a known rate called the half-life. Knowing an isotope's half-life enables scientists to accurately date fossils and estimate the age of the Earth using radiometric dating. Radioisotopes also have medical uses like diagnosing and treating thyroid conditions.
Sci 202_Advanced Biological Science Report - Copy.pptx
The document discusses the chemical nature of biology, focusing on the importance of water, acids, bases, and buffers. It provides details on:
- Water being essential for life as the most abundant substance, functioning as a solvent, transporter, and moderator of temperature.
- Acids increasing hydrogen ion concentration while bases decrease it. Buffers help maintain pH within a narrow range important for biological processes.
- Carbon being the central building block of organic molecules due to its ability to form diverse and complex structures through covalent bonding.
Water structure
This document discusses the structure and properties of water molecules. It explains that water molecules are made up of an oxygen atom bonded to two hydrogen atoms, giving the oxygen a partial negative charge and the hydrogens a partial positive charge. This allows the molecules to form hydrogen bonds with neighboring water molecules. The hydrogen bonding between water molecules forms a three-dimensional network and gives water its unusual properties, such as its high heat capacity and boiling point. The dynamic hydrogen bonding allows water to easily flow and change states while maintaining its cohesive liquid properties.
Benefits Of Alkaline Water
This document discusses the importance of water and its role in biological processes. It explains that water is essential for life as most living things are composed of water. The polarity and hydrogen bonding ability of water molecules allows it to act as a universal solvent and break down other substances through competitive ion attraction. Oxidation-reduction reactions that involve the transfer of electrons are a key mechanism in biological systems. The document also discusses acids, bases, and pH balance, noting that most living matter functions best around a neutral pH. Too much oxygen can form unstable free radicals capable of stealing electrons from cells.
4.waters properties .ppt
Water has unique properties due to its ability to form hydrogen bonds. Hydrogen bonds give water high heat capacity and heat of vaporization, allowing it to regulate temperatures. Water's cohesion and polarity allow it to dissolve other polar molecules and transport nutrients through plants and animals. The hydrogen bonding of water is essential for biological processes like metabolism, photosynthesis, and maintaining cellular structures.
Water - The Life Giving Liquid
Water is essential for life on Earth. It is the most abundant liquid and covers over 70% of the planet. Water is essential for photosynthesis and respiration, the two key reactions that sustain life. It acts as a solvent and transports nutrients, wastes, and heat around organisms. Water's unique properties, including its high heat capacity and ability to form hydrogen bonds, allow it to remain liquid over a wide range of temperatures on Earth. Its polarity allows it to dissolve many other polar substances. Water's hydrogen bonding gives it high melting and boiling points compared to other molecules of similar size.
Water- Biochemistry
Water is essential for all life and makes up a large percentage of the human body. It is present in every cell and is required for enzyme action, transport of solutes, and the folding of biomolecules like proteins and nucleic acids. Water regulates body temperature and accelerates biochemical reactions by providing ions. The polarity and hydrogen bonding properties of water molecules are responsible for many of water's unique properties, such as its high melting point, heat capacity, and ability to dissolve polar and ionic compounds. These properties make water essential for the structure and function of biological molecules and living organisms.
48270042 biology-stpm-lower-6-chapter-1
This document provides an introduction to basic chemistry concepts related to cells, focusing on water and macromolecules. It discusses how water makes up 60-95% of living organisms, and its important properties including polarity, hydrogen bonding, high heat capacity, heat of vaporization, and surface tension. It also summarizes the three main types of macromolecules - polysaccharides, proteins, and nucleic acids - and provides details on carbohydrates including monosaccharides like glucose and their ring structures.
Water 1
Water is essential for life and makes up a large percentage of the human body. It is present in every cell and is the medium in which all cellular processes occur. Water aids enzyme action, transports solutes, and helps fold biomolecules like proteins and nucleic acids. Water regulates body temperature and accelerates biochemical reactions by providing ions. The properties of water that make it suitable for these functions include its polarity, ability to form hydrogen bonds, and ability to dissolve many polar and ionic substances.
Benefits Of Alkaline, Ionized Water By Dr. Hidemitsu Hayashi, M.D.
Water: The chemistry of life. Whenever we attempt to determine whether there is life as we know it on Mars or other planets, scientists first seek to establish whether or not water is present. Why? Because life on earth totally depends on water. A High percentage of living things, both plant and animal are found in water. All life on earth is thought to have arisen from water. The bodies of all living organisms are composed largely of water. About 70 to 90 percent of all organic matter is water. The chemical reactions in all plants and animals that support life take place in a water medium. Water not only provides the medium to make these life sustaining reactions possible, but water itself is often an important reactant or product of these reactions. In short, the chemistry of life is water chemistry.
Lecture 3 Water and pH_Kani.ppt
Water is essential for life and is central to biochemistry. It participates directly in many reactions and allows other molecules to interact. Water's polarity allows it to dissolve other polar molecules and ions. Its hydrogen bonding network gives water unique physical properties and allows it to act as a solvent. The hydrophobic effect causes nonpolar molecules to aggregate in water. Water moves between solutions via osmosis and solutes diffuse. Water ionizes slightly into hydronium and hydroxide ions, giving it buffering properties and allowing acids and bases to alter pH.
Between 2000 and 2002, then again from 2008 to 2010, access measures.pdf
Between 2000 and 2002, then again from 2008 to 2010, access measures showed no
improvement and quality of care measures improved more slowly in racial groups and certain
ethnic populations, than the improvements for the total population.
Solution
Ans:
The health care quality chasm is better described as a gulf for certain segments of the population,
such as racial and ethnic minority groups, given the gap between actual care received and ideal
or best care quality. The landmark Institute of Medicine report Crossing the Quality Chasm: A
New Health System for the 21st Century challenges all health care organizations to pursue six
major aims of health care improvement: safety, timeliness, effectiveness, efficiency, equity, and
patient-centeredness. “Equity” aims to ensure that quality care is available to all and that the
quality of care provided does not differ by race, ethnicity, or other personal characteristics
unrelated to a patient\'s reason for seeking care. Baylor Health Care System is in the unique
position of being able to examine the current state of equity in a typical health care delivery
system and to lead the way in health equity research. Its organizational vision, “culture of
quality,” and involved leadership bode well for achieving equitable best care. However,
inequities in access, use, and outcomes of health care must be scrutinized; the moral, ethical, and
economic issues they raise and the critical injustice they create must be remedied if this goal is to
be achieved. Eliminating any observed inequities in health care must be synergistically
integrated with quality improvement. Quality performance indicators currently collected and
evaluated indicate that Baylor Health Care System often performs better than the national
average. However, there are significant variations in care by age, gender, race/ethnicity, and
socioeconomic status that indicate the many remaining challenges in achieving “best care” for
all.
Explanation: The U.S. health care system is designed to improve the physical and mental well-
being of all Americans by preventing, diagnosing, and treating illness and by supporting optimal
function. Across the lifespan, health care helps people stay healthy, recover from illness, live
with chronic disease or disability, and cope with death and dying. Quality health care delivers
these services in ways that are safe, timely, patient centered, efficient, and equitable.
Unfortunately, Americans too often do not receive care they need, or they receive care that
causes harm. Care can be delivered too late or without full consideration of a patient\'s
preferences and values. Many times, our system of health care distributes services inefficiently
and unevenly across populations. Some Americans receive worse care than others. These
disparities may occur for a variety of reasons, including differences in access to care, social
determinants, provider biases, poor provider-patient communication, and poor health literacy.
Each.
Below is a diagram of the coding strand of DNA showing a gene please .pdf
Below is a diagram of the coding strand of DNA showing a gene please use this image for
questions 3 and 4). The arrow represents the transcription start site. Which region contains the
3\' Untranslated Region (UTR)? A B C D E
Solution
Answer: D
Reason:
When transcription occurs, the m RNA formed is longer than the actual RNA code for protein . It
has few bases at 5’ and 3’ end to protect its degradation in cell environment. While translation,
which started at middle of exon 1 and stopped at the middle of exon 3, Exon 1 has few portion
(C), and exon 3 has few portion (D), which is not undergoing translation. These regions are
known as translated regions at 5’ (C) and 3’ (D) end respectively. DNA has 5’ (in diagram) and
3’ (opposite end, not shown in diagram)..
More Related Content
Similar to Describe what happens to water molecules in solution Describe w.pdf
Ap biology 3 water and life
The document discusses several key properties of water that contribute to Earth's suitability for life. It explains that water's polar covalent bonds allow it to form hydrogen bonds between molecules. These hydrogen bonds give water properties like cohesion, the ability to moderate temperature through heat absorption and evaporative cooling, and being a universal solvent. The document also discusses how acids and bases affect pH and buffering in aqueous solutions.
Water and p h
Water makes up 65-70% of the human body. It has unique properties like high melting and boiling points due to hydrogen bonding between water molecules. The bent shape of water molecules gives them a partial positive and negative charge, allowing them to form hydrogen bonds with other water molecules. These bonds contribute to water's high heat capacity and heat of vaporization. Water's pH measures the concentration of hydronium ions, with values below 7 indicating acidity and above 7 indicating alkalinity. pH is important in biological and chemical systems and can be measured using indicators, meters, and the Henderson-Hasselbalch equation.
BIOCHEMICAL PROPERTIES OF WATER .Raveesh.pptx
Water has unique properties like polarity, hydrogen bonding, and anomalous behavior that arise from its molecular structure and allow it to act as the universal solvent for biological molecules and reactions. Its ability to ionize and act as both an acid and base through donation or acceptance of protons enables water to buffer pH changes and participate in metabolic pathways. The high heat of vaporization and specific heat of water also make it essential for regulating temperatures in living organisms.
Physicochemical properties of water
This document provides an overview of the chemical properties of water. It begins by defining water as H2O, with two hydrogen atoms bonded to one oxygen atom. It then discusses several key points about water: it acts as an important solvent in biological processes; it is a key reactant in many reactions; it is oxidized in photosynthesis; and makes up 70% or more of living organisms. The document also covers the structure of the water molecule, its physical properties including being colorless/tasteless and having a high heat of vaporization, and its chemical properties such as being amphoteric and a universal solvent.
Biology GradeTen Unit Three Short Note For Students
The document discusses biochemical molecules that make up the human body, which are divided into inorganic and organic molecules. Inorganic molecules do not contain carbon and hydrogen, while organic molecules are made up of carbon and hydrogen. Water is an important inorganic molecule that has unique properties like being a solvent, having a high heat capacity and heat of vaporization, and influencing freezing and boiling points. These properties are important for sustaining life. The document also discusses important inorganic ions in the body like hydrogen and sodium ions and their roles in biological processes.
Water
Water has a simple molecular structure composed of one oxygen atom covalently bonded to two hydrogen atoms. This gives water a polar molecular structure with partial positive charges near the hydrogen atoms and a partial negative charge near the oxygen atom. This polarity allows water to dissolve ionic compounds through electrostatic interactions between the ions and polar water molecules but not non-polar covalent compounds which do not interact strongly with water. Heavy water, composed of deuterium and oxygen, is produced through electrolysis or distillation of ordinary water. It has similar but not identical chemical properties as ordinary water and is used as a neutron moderator and to produce deuterium.
Water
Water has a simple molecular structure composed of one oxygen atom covalently bonded to two hydrogen atoms. This gives water a polar molecular structure with partial positive charges near the hydrogen atoms and a partial negative charge near the oxygen atom. This polarity allows water to dissolve ionic compounds through electrostatic interactions between the ions and polar water molecules, but not non-polar covalent compounds which do not interact strongly with water. Heavy water, composed of deuterium instead of hydrogen, is used as a neutron moderator in nuclear reactions and to produce deuterium through electrolysis or reaction with metals.
Lesson 7 WATER.pdf
Water is essential for life and makes up over 70% of the human body. It has unique chemical properties, including being polar and able to form hydrogen bonds, which allow it to moderate temperature, act as a solvent for biochemical reactions, and maintain homeostasis. The body maintains water balance through carefully regulating water intake from foods and fluids and output through urine, feces, sweat, the lungs and skin. Electrolyte balance is also important for homeostasis and involves balancing the amounts of electrolytes like sodium, potassium, calcium and magnesium that enter and leave the body.
Lesson 7 WATER.pptx
Water is essential for life and makes up over 70% of the human body. It is a polar molecule that can form hydrogen bonds between neighboring molecules. This property allows water to moderate temperature, act as a solvent for biochemical reactions, and maintain homeostasis. Water balance is regulated by controlling both intake from drinking and foods and output through urine, feces, sweat, the lungs, and skin. Electrolyte balance also must be maintained as the body gains and loses ions.
properties of water.ppt for grade 9 high school
The document discusses isotopes, radioactive isotopes, and radiometric dating. It defines isotopes as atoms of the same element that vary only in the number of neutrons. Chemically, isotopes of the same element are identical. Some isotopes are radioactive and decay at a known rate called the half-life. Knowing an isotope's half-life enables scientists to accurately date fossils and estimate the age of the Earth using radiometric dating. Radioisotopes also have medical uses like diagnosing and treating thyroid conditions.
Sci 202_Advanced Biological Science Report - Copy.pptx
The document discusses the chemical nature of biology, focusing on the importance of water, acids, bases, and buffers. It provides details on:
- Water being essential for life as the most abundant substance, functioning as a solvent, transporter, and moderator of temperature.
- Acids increasing hydrogen ion concentration while bases decrease it. Buffers help maintain pH within a narrow range important for biological processes.
- Carbon being the central building block of organic molecules due to its ability to form diverse and complex structures through covalent bonding.
Water structure
This document discusses the structure and properties of water molecules. It explains that water molecules are made up of an oxygen atom bonded to two hydrogen atoms, giving the oxygen a partial negative charge and the hydrogens a partial positive charge. This allows the molecules to form hydrogen bonds with neighboring water molecules. The hydrogen bonding between water molecules forms a three-dimensional network and gives water its unusual properties, such as its high heat capacity and boiling point. The dynamic hydrogen bonding allows water to easily flow and change states while maintaining its cohesive liquid properties.
Benefits Of Alkaline Water
This document discusses the importance of water and its role in biological processes. It explains that water is essential for life as most living things are composed of water. The polarity and hydrogen bonding ability of water molecules allows it to act as a universal solvent and break down other substances through competitive ion attraction. Oxidation-reduction reactions that involve the transfer of electrons are a key mechanism in biological systems. The document also discusses acids, bases, and pH balance, noting that most living matter functions best around a neutral pH. Too much oxygen can form unstable free radicals capable of stealing electrons from cells.
4.waters properties .ppt
Water has unique properties due to its ability to form hydrogen bonds. Hydrogen bonds give water high heat capacity and heat of vaporization, allowing it to regulate temperatures. Water's cohesion and polarity allow it to dissolve other polar molecules and transport nutrients through plants and animals. The hydrogen bonding of water is essential for biological processes like metabolism, photosynthesis, and maintaining cellular structures.
Water - The Life Giving Liquid
Water is essential for life on Earth. It is the most abundant liquid and covers over 70% of the planet. Water is essential for photosynthesis and respiration, the two key reactions that sustain life. It acts as a solvent and transports nutrients, wastes, and heat around organisms. Water's unique properties, including its high heat capacity and ability to form hydrogen bonds, allow it to remain liquid over a wide range of temperatures on Earth. Its polarity allows it to dissolve many other polar substances. Water's hydrogen bonding gives it high melting and boiling points compared to other molecules of similar size.
Water- Biochemistry
Water is essential for all life and makes up a large percentage of the human body. It is present in every cell and is required for enzyme action, transport of solutes, and the folding of biomolecules like proteins and nucleic acids. Water regulates body temperature and accelerates biochemical reactions by providing ions. The polarity and hydrogen bonding properties of water molecules are responsible for many of water's unique properties, such as its high melting point, heat capacity, and ability to dissolve polar and ionic compounds. These properties make water essential for the structure and function of biological molecules and living organisms.
48270042 biology-stpm-lower-6-chapter-1
This document provides an introduction to basic chemistry concepts related to cells, focusing on water and macromolecules. It discusses how water makes up 60-95% of living organisms, and its important properties including polarity, hydrogen bonding, high heat capacity, heat of vaporization, and surface tension. It also summarizes the three main types of macromolecules - polysaccharides, proteins, and nucleic acids - and provides details on carbohydrates including monosaccharides like glucose and their ring structures.
Water 1
Water is essential for life and makes up a large percentage of the human body. It is present in every cell and is the medium in which all cellular processes occur. Water aids enzyme action, transports solutes, and helps fold biomolecules like proteins and nucleic acids. Water regulates body temperature and accelerates biochemical reactions by providing ions. The properties of water that make it suitable for these functions include its polarity, ability to form hydrogen bonds, and ability to dissolve many polar and ionic substances.
Benefits Of Alkaline, Ionized Water By Dr. Hidemitsu Hayashi, M.D.
Water: The chemistry of life. Whenever we attempt to determine whether there is life as we know it on Mars or other planets, scientists first seek to establish whether or not water is present. Why? Because life on earth totally depends on water. A High percentage of living things, both plant and animal are found in water. All life on earth is thought to have arisen from water. The bodies of all living organisms are composed largely of water. About 70 to 90 percent of all organic matter is water. The chemical reactions in all plants and animals that support life take place in a water medium. Water not only provides the medium to make these life sustaining reactions possible, but water itself is often an important reactant or product of these reactions. In short, the chemistry of life is water chemistry.
Lecture 3 Water and pH_Kani.ppt
Water is essential for life and is central to biochemistry. It participates directly in many reactions and allows other molecules to interact. Water's polarity allows it to dissolve other polar molecules and ions. Its hydrogen bonding network gives water unique physical properties and allows it to act as a solvent. The hydrophobic effect causes nonpolar molecules to aggregate in water. Water moves between solutions via osmosis and solutes diffuse. Water ionizes slightly into hydronium and hydroxide ions, giving it buffering properties and allowing acids and bases to alter pH.
Similar to Describe what happens to water molecules in solution Describe w.pdf (20)
Biology GradeTen Unit Three Short Note For Students
Biology GradeTen Unit Three Short Note For Students
Sci 202_Advanced Biological Science Report - Copy.pptx
Sci 202_Advanced Biological Science Report - Copy.pptx
Benefits Of Alkaline, Ionized Water By Dr. Hidemitsu Hayashi, M.D.
Benefits Of Alkaline, Ionized Water By Dr. Hidemitsu Hayashi, M.D.
More from RBMADU
Between 2000 and 2002, then again from 2008 to 2010, access measures.pdf
Between 2000 and 2002, then again from 2008 to 2010, access measures showed no
improvement and quality of care measures improved more slowly in racial groups and certain
ethnic populations, than the improvements for the total population.
Solution
Ans:
The health care quality chasm is better described as a gulf for certain segments of the population,
such as racial and ethnic minority groups, given the gap between actual care received and ideal
or best care quality. The landmark Institute of Medicine report Crossing the Quality Chasm: A
New Health System for the 21st Century challenges all health care organizations to pursue six
major aims of health care improvement: safety, timeliness, effectiveness, efficiency, equity, and
patient-centeredness. “Equity” aims to ensure that quality care is available to all and that the
quality of care provided does not differ by race, ethnicity, or other personal characteristics
unrelated to a patient\'s reason for seeking care. Baylor Health Care System is in the unique
position of being able to examine the current state of equity in a typical health care delivery
system and to lead the way in health equity research. Its organizational vision, “culture of
quality,” and involved leadership bode well for achieving equitable best care. However,
inequities in access, use, and outcomes of health care must be scrutinized; the moral, ethical, and
economic issues they raise and the critical injustice they create must be remedied if this goal is to
be achieved. Eliminating any observed inequities in health care must be synergistically
integrated with quality improvement. Quality performance indicators currently collected and
evaluated indicate that Baylor Health Care System often performs better than the national
average. However, there are significant variations in care by age, gender, race/ethnicity, and
socioeconomic status that indicate the many remaining challenges in achieving “best care” for
all.
Explanation: The U.S. health care system is designed to improve the physical and mental well-
being of all Americans by preventing, diagnosing, and treating illness and by supporting optimal
function. Across the lifespan, health care helps people stay healthy, recover from illness, live
with chronic disease or disability, and cope with death and dying. Quality health care delivers
these services in ways that are safe, timely, patient centered, efficient, and equitable.
Unfortunately, Americans too often do not receive care they need, or they receive care that
causes harm. Care can be delivered too late or without full consideration of a patient\'s
preferences and values. Many times, our system of health care distributes services inefficiently
and unevenly across populations. Some Americans receive worse care than others. These
disparities may occur for a variety of reasons, including differences in access to care, social
determinants, provider biases, poor provider-patient communication, and poor health literacy.
Each.
Below is a diagram of the coding strand of DNA showing a gene please .pdf
Below is a diagram of the coding strand of DNA showing a gene please use this image for
questions 3 and 4). The arrow represents the transcription start site. Which region contains the
3\' Untranslated Region (UTR)? A B C D E
Solution
Answer: D
Reason:
When transcription occurs, the m RNA formed is longer than the actual RNA code for protein . It
has few bases at 5’ and 3’ end to protect its degradation in cell environment. While translation,
which started at middle of exon 1 and stopped at the middle of exon 3, Exon 1 has few portion
(C), and exon 3 has few portion (D), which is not undergoing translation. These regions are
known as translated regions at 5’ (C) and 3’ (D) end respectively. DNA has 5’ (in diagram) and
3’ (opposite end, not shown in diagram)..
A patient has a tidal volume of 0.50 L, a frequency of breathing or r.pdf
A patient has a tidal volume of 0.50 L, a frequency of breathing or respiratory rate of 19.0
breaths/min, and an anatomical dead space volume of 0.20 L. Calculate the alveolar ventilation
rate.
Solution
The alveolar ventilation (VA) and the dead space ventilation/volume (VD) together combine to
form pulmonary ventilation rate (V). So, V = VA + VD or VA = V - VD
The pulmonary ventilation rate is given by, V = VT x f
Where VT = Tidal volume and f = Respiratory Rate
Here we know, VT = 0.5 and f = 19. So, V = 0.5*19 = 9.5 L
We are given that VD = 0.2 L, So, VA = 9.5 - 0.2 = 9.3 L
Hence, VA i.e. Alveolar Ventilation rate is 9.3 L/min.
Write a program to recognizing Idenifier Or Constant in C language.pdf
Write a program to recognizing Idenifier Or Constant in C language
Below is sample input and output
/* Output:
enter string
sum 10
sum is Identifier
10 is Constant */
Solution
#include int main() { int number; // printf() dislpays the formatted output
printf(\"Enter an integer: \"); // scanf() reads the formatted input and stores them
scanf(\"%d\", &number); // printf() displays the formatted output printf(\"You entered:
%d\", number); return 0; }.
Why having a lipid rich cell wall make a bacteria harder to stain.pdf
Why having a lipid rich cell wall make a bacteria harder to stain?
Solution
In lipid rich cell walled bacteria the alcohol easily pass through the walls making loss of lipid
and increasing pores in the membrane thus making the cell wall more porous and the stain is
easily washed out distaining the cell. So it is difficult to retain the stain inside the lipid rich cell
walled bacteria while staining (Harder to stain)..
Which of the following statements about leasing is falseALease fina.pdf
Which of the following statements about leasing is false?ALease financing is a substitute for
debt financing.
Solution
Lease is defined as a contract between two parties for use of assets of one parties by paying rent
for using assets. the owner of assets is calls Lessor and the person who use assets is called
Lessee. In lease analysis residual value that is value of assets at end of lease contract must be
considered. In operating lease maintainance expense should be paid by lessee only. Lease is
considered as substitute for debt financing.
So, Incorrect statement about lease contract option (E)..
using the single linked list code written in the class or in the lab,.pdf
using the single linked list code written in the class or in the lab, write and test the follow
function: Merge() function that takes two lists, each of which is sorted in increasing order, and
merges the two together into one list which is in increasing order.
Solution
//The main class
class MergeList {
Node head; // head of list
static Node a, b;
//Node class
static class Node {
int element;
Node next;
// Constructor to create a new node
Node(int d) {
element = d;
next = null;
}
}
void printlist(Node node) {
while (node != null) {
System.out.print(node.element + \" \");
node = node.next;
}
}
Node sortMerge(Node node1, Node node2) {
// Here we will check whether both the list are null or not.
if (node1 == null && node2 == null) {
return null;
}
// sortResultant node
Node sortRes = null;
// Now we will compare and merge the elements of both the list.
while (node1 != null && node2 != null) {
// We will compare current element of both lists
if (node1.element >= node2.element) {
Node temp = node1.next;
node1.next = sortRes;
sortRes = node1;
node1 = temp;
} else {
Node temp = node2.next;
node2.next = sortRes;
sortRes = node2;
node2 = temp;
}
}
// If second list reached end, but first list has
// nodes. Add remaining nodes of first list at the
// front of sortResult list
while (node1 != null) {
Node temp = node1.next;
node1.next = sortRes;
sortRes = node1;
node1 = temp;
}
// If first list reached end, but second list has
// node. Add remaining nodes of first list at the
// front of sortResult list
while (node2 != null) {
Node temp = node2.next;
node2.next = sortRes;
sortRes = node2;
node2 = temp;
}
return sortRes;
}
public static void main(String[] args) {
MergeList list = new MergeList();
Node sortResult = null;
//Create two linked list
list.a = new Node(5);
list.a.next = new Node(10);
list.a.next.next = new Node(15);
list.b = new Node(2);
list.b.next = new Node(3);
list.b.next.next = new Node(20);
System.out.println(\"List a before merge :\");
list.printlist(a);
System.out.println(\"\");
System.out.println(\"List b before merge :\");
list.printlist(b);
// Cal the function to merge the list in increasing order.
sortResult = list.sortedmerge(a, b);
System.out.println(\"\");
System.out.println(\"Merged linked list : \");
list.printlist(sortResult);
}
}.
A database management system is also referred to as a database. True.pdf
A database management system is also referred to as a database. True False Which of the
following is true of a virtual private network (VPN)? It provides a secure connection for
information transmitted over the public Internet. It does not encrypt messages. It is limited to
organizational use. It can be used to store highly sensitive information of an organization in
local clients. Compute represent data using binary digits called _____. dots pixels tags bits
McCann Systems, a leading IT firm, develops a customized billing software to meet the needs of
its individual customers. In this case, the software developed by the firm is referred to as a (n)
_____. vertical-market application software horizontal-market application software open
source software application simulation software Phobias Inc. offers an online service that stores
notes made by customers on the cloud. When a customer enters notes on a device, it gets updated
in all the devices he/she owns. Which of the following cloud-based offering does Phobias Inc.
provide to its customers? Unified communications as a service (UCaaS) platforms as a service
(PaaS) software as a service (SaaS) infrastructure as a service (IaaS) The conversion of the
existing traditional databases in organizations to NoSQL database is _____. Highly efficient and
is being practiced by many organizations highly recommended because it is user friendly very
cost-effective but can be enormously disruptive unnecessary when relational database meet the
needs of organizations
Solution
21 b) False
Database contains different levels of abstraction:
1) External (How the users view the data)
2) Conceptual (Communication medium between internal and external levels)
3) Internal (How the data is physically stored)
DBMS is a software that manages databases and allows us to create, edit and delete database,
their tables and their data.
Examples: MySQL, Oracle, etc
22) a) It provides a secure connection for information transmitted over the public network.
c) Yes it is limited to organizational use.
23) d) bits
24) a) vertical application software
Vertical application is supports a specific business process and targets a smaller number of users
with specific need and job responsibilities within an organization.
25) IaaS
26) A and B.
An envolope contains three cards A black card that is black on both.pdf
An envolope contains three cards: A black card that is black on both sides, a white card that is
white on both sides and a mixed card that is black on one side and white on the other. You select
one card on random and note that the card facing up is black. What is the probability that the
other side is black?
Solution
P(first side is black) = (1/3)*(1) + (1/3)*(1/2) + (1/3)*(0)
P(first side is black) = 1/2 = 0.5
P(other side is black|first side is black) = P(both sides black)/P(first side is black)
= (1/3)*1/(0.5)
= 2/3 = 0.67.
There was a mass extinction of plants and animals at the end of the P.pdf
There was a mass extinction of plants and animals at the end of the Permian period 250 million
years ago. Which of the following would be a reasonable prediction for the fungal fossil record?
A. There should be a massive increase in saprophytic fossils during the extinction, and then a
massive decline shortly after the extinction was complete. B. There should be a massive increase
in mycorrhizal fossils during the extinction and few afterward. C. There should be a massive
decrease in all fungal fossils just prior to the time that plant and animal species started to decline,
and the number of these fossils should remain low throughout the extinction period. D. There
should be a slow increase in all fungal fossils during the time that plant and animal species
declined, with their numbers staying relatively high after ward since there was little competition
from other species.
Solution
correct answer:-(A)There should be a massive increase in saprophytic fossils during the
extiction,and then a massive decline shortly after the extiction was complete.
Because when the saprophytic plants died,they must have definitely become a large amount of
fossil.Moreover fungal fossils are very difficult to identify,only except some fungi.When the
extinction was complete it was shortly decline..
The size P of a certain insect population at time t (in days) obeys t.pdf
The size P of a certain insect population at time t (in days) obeys the function P(t) = 500 e^0 01t.
Determine the number of insects at t = 0 days. What is the growth rate of the insect population?
What is the population after 10 days? When will the insect population reach 700? When will the
insect population double? What is the number of insects at t = 0 days? Insects
Solution.
The fundamental theory of electromagnetic field is based on Maxwell.pdf
The fundamental theory of electromagnetic field is based on Maxwell\'s equations. These
equations govern the electromagnetic fields, E, D, H, and there relations to the source, f and p_v.
In a source-free region, list the Maxwell\'s equations for time-harmonic fields: Given the Phaser
from of the electric field E? For the above given electric field, is B varying with time? Why?
Solution
Maxwell’s equations simplify considerably in the case of harmonic time dependence. Through
the inverse Fourier transform, general solutions of Maxwell’s equation can be built as linear
combinations of single-frequency solutions:† E(r, t)= E(r, )ejt d2 (1) Thus, we assume that all
fields have a time dependence ejt: E(r, t)= E(r)ejt, H(r, t)= H(r)ejt where the phasor amplitudes
E(r), H(r) are complex-valued. Replacing time derivatives by t j, we may rewrite Eq. in the
form:
× E = jB
× H = J + jD
· D =
· B = 0
(Maxwell’s equations) (2) In this book, we will consider the solutions of Eqs. (.2) in three
different contexts: (a) uniform plane waves propagating in dielectrics, conductors, and
birefringent media, (b) guided waves propagating in hollow waveguides, transmission lines, and
optical fibers, and (c) propagating waves generated by antennas and apertures
Next, we review some conventions regarding phasors and time averages. A realvalued sinusoid
has the complex phasor representation: A(t)= |A| cos(t + ) A(t)= Aejt (3) where A = |A|ej. Thus,
we have A(t)= Re A(t) = Re Aejt . The time averages of the quantities A(t) and A(t) over one
period T = 2/ are zero. The time average of the product of two harmonic quantities A(t)= Re Aejt
and B(t)= Re Bejt with phasors A, B is given by A(t)B(t) = 1T T0 A(t)B(t) dt = 12 Re AB] (4) In
particular, the mean-square value is given by: A2(t) = 1T T0 A2(t) dt = 12 Re AA]= 12|A|2 (5)
Some interesting time averages in electromagnetic wave problems are the time averages of the
energy density, the Poynting vector (energy flux), and the ohmic power losses per unit volume.
Using the definition) and the result (.4), we have for these time averages:
w = 1 2 Re 12E · E + 12H · H (energy density) P = 1/ 2 Re E × H (Poynting vector) dPloss dV =
1/ 2 Re Jtot · E (ohmic losses) (6) where Jtot = J + jD is the total current in the right-hand side of
Amp`ere’s law and accounts for both conducting and dielectric losses. The time-averaged
version of Poynting’s theorem is discussed in Problem 1.5. The expression (1.9.6) for the energy
density w was derived under the assumption that both and were constants independent of
frequency. In a dispersive medium, , become functions of frequency. In frequency bands where
(), () are essentially real-valued, that is, where the medium is lossless,that the timeaveraged
energy density generalizes to: w = 1/ 2 Re 1/2 d() d E · E + 1/2 d() d H · H (lossless case) (.7)
The derivation of (.7) is as follows. Starting with Maxwell’s equations (1.1.1) and without
assuming any particular constitutive relations, we obtain:.
Part I – Antibiotics and the Human Microbiome Amelia and her family .pdf
Part I – Antibiotics and the Human Microbiome Amelia and her family had just returned from a
family vacation in Mexico. While there they had enjoyed an abundance of fresh fruit and
vegetables from the local street vendors outside of their hotel. Amelia’s mother normally would
have avoided these fruit stands because her doctor had warned her to be cautious of raw produce
while travelling in less developed countries. But she recently had read a New York Times article
illustrating the benefits of various microbes on the immune system and decided to embrace the
local agriculture in Mexico as a result. However, by the end of their trip, they all had begun to
suffer from nausea and diarrhea. Their family doctor diagnosed 16 year-old Amelia and her
family with food poisoning and promptly placed them all on antibiotics. While her brother and
parents started feeling better relatively quickly, Amelia continued to suffer from gastrointestinal
(GI) distress. She found that she couldn’t leave her home because she was constantly running to
the bathroom (10–12 times per day). While the rest of her family seemed well rested and
recovered, Amelia felt tired, had severe abdominal cramping, and had lost her appetite. After
visiting a gastroenterologist, Amelia was diagnosed with Crohn’s disease (CD). CD is a chronic
inflammatory bowel disease, where the immune cells in the intestine become overly sensitive to
the bacteria residing in the intestines causing pathologic inflammation in the lining of the GI
tract. It typically presents in the small intestine but can occur anywhere along the GI tract from
the mouth down to the anus. Determined to shed some light on her diagnosis, Amelia began to
search the Internet for information. As she read many personal stories of other Crohn’s patients,
she noticed many of them also had the first onset of their disease following a course of
antibiotics. She was astonished to find that her intestines were the home for billions of bacteria
collectively called the gut microbiota. In fact, she read that there were more than 10 times the
number of bacterial cells in her body than human cells; best estimates suggested there are 1013
bacterial cells in a single human body. She was also surprised to discover that some scientists
estimate as many as 10,000 different microbial species reside in or on the average healthy human
body (Proctor, 2012). She found an article in Wired (http://www.
wired.com/2011/09/mf_microbiome/) that described the impact of antibiotics on the gut
microbiota. Amelia was particularly struck by the figure that illustrated the lasting impact that
antibiotics have on microbial diversity in the intestines. She began to wonder about the impact
her recent course of antibiotics had had on her intestines and what it meant for her health.
Questions
1.Look at the figure that Amelia found in Wired pertaining to antibiotics and the microbiota.
What conclusions can you draw from this figure?
2. Given the fact that Amelia fou.
Recall the Squeeze TheoremSuppose that for all n, xn yn zn. If .pdf
Recall the Squeeze Theorem:
Suppose that for all n, xn yn zn. If (xn) and (zn) both converge to L R, then (yn) also converges
to L.
Louis Reasoner gives the following proof:
Using limit comparison theorems, since xn yn, for all n, then lim xn lim yn, and so L lim yn.
Similarly, since yn zn, for all n, then lim yn lim zn, so lim yn L. Putting the 2 inequalities
together, lim yn = L, Q.E.D.
What’s wrong with this proof?
Solution
Nothing is wrong. It is correct..
Since somathesthetic sensation from each side of the body projects t.pdf
Since somathesthetic sensation from each side of the body projects to the contralateral
postcentral gyrus _______ must have occurred at some point along the pathway.
Solution
Answer: Since somathesthetic sensation from each side of the body projects to the contralateral
postcentral gyrus _ decussation_ must have occurred at some point along the pathway.
Reason:
Somatosensory system- decussation:
Proprioceptors (receptors of self -sensation & decussation) are present in the joints and skeletal
(striated) muscles. These receptors sense the relative position of other body parts and balance the
posture. Somathesthetic sensation from each side of the body projects to the contralateral
postcentral gyrus to parietal lobe, so that initially decussations must have occurred at some point
along the pathway representing a muscular activity. The overall body posture and movement is
balanced by the integration of information received from the vestibular system and
proprioceptors by the brain.
For example, the central information in playing piano is due to severe and increased stimulation
of accompanying motor areas such as premotor cortex with proper planning with proprioception
for decussation. But the activation of cerebellum is a bit less compared to the propriocetion.
Spinocerebellar tracts are more widely projected via dorsal column and to the cerebellum and
finally the information is considerably utilized for rhythmic movements.
This is pathway mainly involved in the sensory ascending pathways to process sensation &
perception through a 3 neuron system finally enable “sensory information” to the central nervous
system through sensory receptor to the cortex. This pathway is mainly involved in mediating
discriminative touch sensation through adequate proprioception & vibration.
This pathway has two white matter tracts profoundly possess a first neuron mainly through
fasciculus gracilis in the medial column from lower limb (T6 and lower) & sensory information
is obtained through fasciculus cuneatus: of lateral column in upper limb (T5)
Features of spinothalamic pathway: This is the sensory pathway mainly involved in processing
sensory information of “poorly localized touch, pressure & temperature”. This pathway is going
to involve cross of sensory information to the spinal cord prior to ascending via the anterior or
spinothalamic & lateral spinothalamic tracts.
Interaction of these two pathways: The interaction of these two pathways are mainly through
axons & spinaothalamic tracts arising into an ascending pathway to transport to the sensory
information processing center in the brain. Mainly spinothalamic neurons are going to use first
order neurons, second order neurons, third order neurons to enter spinal cord and synapse
through posterior gray horns & these neurons are going to carry sensory information of pain,
sensation etc in ventral nucleus group of the thalamus. This information is going to reach through
from the Lemniscal pathway finally relaye.
Say whether each of the following statements is true (“T”) or false .pdf
Say whether each of the following statements is true (“T”) or false (“F”).
__ When modifying existing software, changes should follow the style of the original code.
__ In software testing, “path coverage” is another name for “statement coverage”.
__ The file command can be used to assess the type of a file.
__ The “o” in a pattern o+rx that can be given as as argument to chmod(1) stands for “owner”.
__ A downside to operating systems like LINUX and UNIX is that they still use the concept of
processes.
Other operating systems, such as Microsoft Windows, have done away with processes.
__ To send a signal to a process we use the >>> construct in the shell. For example, to send a
SIGKILL to a process with PID 7476, we would give the command
__ A characteristic of TDD (test-driven development) is the extensive use of prototypes.
__ Most UNIX/LINUX (shell) commands are actually the names of programs.
__ A characteristic of iterative software development is that one breaks a problem into a small
problem plus
a series of increments.
__ In a C/C++ program that includes the file , a data type of uint32_t is always 4 bytes in size.
B. (1 mark each, 6 marks total)
In each of the statements below, fill in the blank with the word or phrase which best fits the
overall state- ment.
In the context of output from ps(1), the acronym PPID stands for
_______________________________ .
The name of the environment variable which defines the list of paths searched by bash for
commands is
_________________________ .
Every complete C/C++ program has a function called __________________ . It is the standard
entry point
to the program.
UNIX/LINUX tools (commands) typically follow the convention of writing their output to
____________________________ and reading their input from __________________________
.
In UNIX/LINUX, a(n) _______________ is a named sequence of nonvolatile bytes.
A(n) _______________ is a a pair of streams, one for writing and one for reading, such that
everything written on the output stream can be read from the input stream in order and with full
fidelity.
C. (26 marks)
For each of the following multiple-choice1 questions, indicate the answer that is the best
response to the question. Circle the label (e.g. “(a)”) of your intended response in each case.
1. Which of the following sentences describing “testing” and “debugging” is true?
(a) Testing finds bugs, debugging locates error messages.
(b) Testing finds coding faults, debugging locates execution failures.
(c) Testing finds execution failures, debugging locates coding faults.
(d) Testing generates error messages, debugging locates bugs.
(e) None of the above.
1. or, as Peppermint Patty from the Peanuts comic strip would say, “mystical guess”
page 2
Cmpt 214 Midterm Examination
October 21, 2014
Which of the following statements regarding good programming style is true?
(a) A user should preferentially use the layout
rather than
(b) A user should preferentially use the layout if (condition)
{ }
r.
Research and identify three IT-related Risk Management Plans and lis.pdf
Research and identify three IT-related Risk Management Plans and list your references to the
three plans you found. Then identify 10 important components of an IT Risk Management Plan
and define these components as well as their importance in an organization. The submitted
document should not exceed two pages in length.
Solution
The three IT related risk management plans are as follows:
Following are the components of an IT related risk management plan:
System characterization: System characterization comprises of identification and listing of the
characteristics of a system. This helps the analysts to identify any bug easily in case of
malfunctioning. The various characteristics of a system can be its need, functional requirement,
mission, goal, network, security controls etc.
Threat identification: This refers to identification of the types of threats a system can face in an
organization. The system is designed in such a way that it is able to identify the threats that
might be harmful for the system that is being used. Hacking, viruses, data compromise are some
of the threats that are faced by systems in an organization.
Vulnerability identification: This involves identification of those areas that are vulnerable for a
system. The vulnerable areas are required to be monitored closely.
Control analysis: This involves controlling various functions that are related with a system and
controlling them so that the system works in the way as required by a company.
Likelihood determination: Likelihood determination relates with determining the likeliness that a
threat may be damaging for the system. There might be likelihood that the threat might be high,
medium or low as far as the likelihood of the threat from a bug is concerned.
Impact analysis: This component analyzes the impact of potential threat from vulnerability. The
impact analysis requires taking into account the importance of the system. In case of critical
system the impact from vulnerability would be high.
Risk determination: This involves determining the amount of risk involved in a system. This
allows the system analysts to formulate the plans accordingly.
Control recommendation: The component requires that there should be recommendations in
place that would require controlling of the system so that the system works optimally and gives
the desired results.
Results documentation: There should be a document that should contain all the details that are
related with the results that are to be provided by the system..
please help me with two partI Bold it out as wrong part which in t.pdf
please help me with two part
I Bold it out as wrong part which in the first part of code and the last part of it.
JAVA CODE
import java.util.List;
import javafx.application.Application;
import javafx.event.Event;
import javafx.event.EventHandler;
import javafx.geometry.Insets;
import javafx.geometry.Pos;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.Label;
import javafx.scene.control.TextField;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.GridPane;
import javafx.scene.layout.HBox;
import javafx.stage.Stage;
// class for revrse multiplication table
public class RC_revmul extends Application
{
// over ride nethod for setup the grid
@Override
public void start(Stage primaryStage)
{
BorderPane RCpane = new BorderPane();
RCpane.setTop(getHbox1());
HBox RCprompt = new HBox(15);
RCprompt.setPadding(new Insets(15, 15, 15, 15));
RCprompt.setAlignment(Pos.TOP_CENTER);
RCprompt.getStyleClass().add(\"hbox2\");
Label lblRCProblem = new Label(\"Enter Answer: \");
RCprompt.getChildren().add(lblRCProblem);
TextField tfRCProblem = new TextField();
RCprompt.getChildren().add(tfRCProblem);
GridPane RCgridPane = setUpGrid();
GridpaneHelper gh = new GridpaneHelper(RCgridPane); // this lane is wrong but why ?
Button btnRCFindAnswer = new Button(\"Find problems\");
btnRCFindAnswer.addEventHandler(MouseEvent.MOUSE_CLICKED, new EventHandler()
{
@Override
public void handle(Event arg0)
{
List RCx = showFactors(tfRCProblem);
for (int[] RCx1 : RCx) {
Node node = gh.RCgetChildren()[RCx1[0]][RCx1[1]];
node.setStyle(\"-fx-background-color: green\");
}
}
});
RCprompt.getChildren().add(btnRCFindAnswer);
RCpane.setCenter(RCprompt);
RCpane.setBottom(RCgridPane);
Scene scene = new Scene(RCpane, 550, 650);
scene.getStylesheets().add(getClass().getResource(\"application.css\").toExternalForm());
primaryStage.setTitle(\"lab 6\");
primaryStage.setScene(scene);
primaryStage.show();
}
// method for grid layout
private HBox getHbox1()
{
HBox RChbox = new HBox(15);
RChbox.setPadding(new Insets(15, 15, 15, 15));
RChbox.setAlignment(Pos.TOP_CENTER);
RChbox.getStyleClass().add(\"hbox1\");
Label lblRCProblem = new Label(\"Reverse Multiplication Table\");
RChbox.getChildren().add(lblRCProblem);
return RChbox;
}
// method to setup a grid
public GridPane setUpGrid() {
GridPane RCpane = new GridPane();
Label[][] RClabels = new Label[11][11];
for (int RCrow = 0; RCrow < 11; RCrow++) {
for (int RCcol = 0; RCcol < 11; RCcol++) {
Label RClbl = new Label();
setUpLabel(RClbl, RCcol, RCrow);
RClabels[RCrow][RCcol] = RClbl;
RCpane.add(RClbl, RCcol, RCrow);
}
}
return RCpane;
}
// method to setup label
public void setUpLabel(final Label RClbl, final int RCcol, final int RCrow)
{
RClbl.setPrefHeight(50);
RClbl.setPrefWidth(50);
RClbl.setAlignment(Pos.CENTER);
RClbl.setStyle(\"-fx-stroke-border: black; -fx-border-width: 1;\");
String RCa = String.valueOf(RCrow);
String RCb = S.
Matching. Choose the most appropriate answer from the right. 1. Null .pdf
Matching. Choose the most appropriate answer from the right. 1. Null Modem 2. FDM 3.
Fourier Transform c. Interleave blocks of bits 4. _Photodiode 5. Repeater 6. TDM 7. Twisted
Pair 8. Manchester a. RJ-45 d. Extend Range e. Connect two DTEs directly f. detect fiber
transmission h. RJ-11 Fixed Frequency j. Trafic Division k. Digital/Digital used in LAN I.
Duplicate data on two machines m. Core n. Creates light pulses
Solution
>null modem = Connect 2 DTE dirctly
>FDM = Many frequencies on same medium
>Fourier transform = composite signal to component parts
>Photodiode = detect fiber transmission
>Repeater = Extend range
>TDM = interleave block of bits
>Twisted pair = RJ-45.
Numerous diseases are caused by viruses and bacteria (etc. Hepatitis.pdf
Numerous diseases are caused by viruses and bacteria (etc. Hepatitis, West Nile Virus, Pertussis,
Avian Flu, Ebola, Cholera, Typhoid). On a Global scale, viral and bacterial diseases result in
hundreds of thousands of deaths every year (sometimes millions in the case of epidemics or
pandemics). However, for many of these viral and bacterial pathogens there are effective
vaccines available.
So, do you think the government, or your employer, or your school has the right to require
vaccinations. What if your job requires you to come in contact with hundreds of people a day
(nurse, bus driver, etc.).
Solution
The immunity against these pathogenic diseases has to develop in the children so small kids must
be ensured for complete vaccination at proper ages. Vaccines for diseases like Hepatitis and
Ebola are given at the early age to develop immunity for such diseases. However, those children
who could not get them, should be attended by their schools through government initiatives to
make sure every child get them.
The jobs like nurse and drivers who happen to meet hundreds of people daily are at the greater
risk of developing the diseases so their employers must take care of them..
More from RBMADU (20)
Between 2000 and 2002, then again from 2008 to 2010, access measures.pdf
Between 2000 and 2002, then again from 2008 to 2010, access measures.pdf
Below is a diagram of the coding strand of DNA showing a gene please .pdf
Below is a diagram of the coding strand of DNA showing a gene please .pdf
A patient has a tidal volume of 0.50 L, a frequency of breathing or r.pdf
A patient has a tidal volume of 0.50 L, a frequency of breathing or r.pdf
Write a program to recognizing Idenifier Or Constant in C language.pdf
Write a program to recognizing Idenifier Or Constant in C language.pdf
Why having a lipid rich cell wall make a bacteria harder to stain.pdf
Why having a lipid rich cell wall make a bacteria harder to stain.pdf
Which of the following statements about leasing is falseALease fina.pdf
Which of the following statements about leasing is falseALease fina.pdf
using the single linked list code written in the class or in the lab,.pdf
using the single linked list code written in the class or in the lab,.pdf
A database management system is also referred to as a database. True.pdf
A database management system is also referred to as a database. True.pdf
An envolope contains three cards A black card that is black on both.pdf
An envolope contains three cards A black card that is black on both.pdf
There was a mass extinction of plants and animals at the end of the P.pdf
There was a mass extinction of plants and animals at the end of the P.pdf
The size P of a certain insect population at time t (in days) obeys t.pdf
The size P of a certain insect population at time t (in days) obeys t.pdf
The fundamental theory of electromagnetic field is based on Maxwell.pdf
The fundamental theory of electromagnetic field is based on Maxwell.pdf
Part I – Antibiotics and the Human Microbiome Amelia and her family .pdf
Part I – Antibiotics and the Human Microbiome Amelia and her family .pdf
Recall the Squeeze TheoremSuppose that for all n, xn yn zn. If .pdf
Recall the Squeeze TheoremSuppose that for all n, xn yn zn. If .pdf
Since somathesthetic sensation from each side of the body projects t.pdf
Since somathesthetic sensation from each side of the body projects t.pdf
Say whether each of the following statements is true (“T”) or false .pdf
Say whether each of the following statements is true (“T”) or false .pdf
Research and identify three IT-related Risk Management Plans and lis.pdf
Research and identify three IT-related Risk Management Plans and lis.pdf
please help me with two partI Bold it out as wrong part which in t.pdf
please help me with two partI Bold it out as wrong part which in t.pdf
Matching. Choose the most appropriate answer from the right. 1. Null .pdf
Matching. Choose the most appropriate answer from the right. 1. Null .pdf
Numerous diseases are caused by viruses and bacteria (etc. Hepatitis.pdf
Numerous diseases are caused by viruses and bacteria (etc. Hepatitis.pdf
Recently uploaded
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneAdvanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Recently uploaded (20)
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Describe what happens to water molecules in solution Describe w.pdf
- 1. Describe what happens to water molecules in solution Describe what happens to water molecules in solution Solution A water molecules contain two oxygen atoms and one hydrogen atom. Since the oxygen atom is partially electro-negative and hydrogen atom is partially electro-positive in nature, the water molecules get partially charged with positive and negative charges. This distribution of charges on water atoms formulates the basis for dissolution of various solutes and formation of hydrogen bonds in water. When water is added to a solution or any hydrophilic solute is added to water, the distribution of partial charges on the water molecule disperses the solute into different ionic states and forms hydrogen bonds with the solute. This constant formation of hydrogen bonds of water molecules with the solute helps in dissolution of solute and maintain fluid state of water. Depending upon the nature of solute, the dissolution can be endothermic, exothermic or athermic in nature. However, heating of water leads to increase in randomness of water molecules thus increasing solubility of solutes in water. Thus, dissolution of solute and behaviour of water depends upon the nature of solute and physical properties of water and solute along with external factors such as temperature etc.