The Deep Impact mission aimed to study comet Tempel 1 by crashing an impactor spacecraft into its surface. The flyby spacecraft would observe the impact and study the crater formation and ejecta plume. The impactor was the size of a coffee table while the flyby spacecraft was nearly the size of a Volkswagen Beetle. The impact was scheduled for July 4, 2005 at a velocity of 23,000 mph to excavate a crater over 100 meters in diameter and expose the comet's pristine interior for analysis.
A New Exploration Strategy
Dr. Edward F. Crawley
Ford Professor of Engineering at MIT
Co-chair of NASA Exploration Technology Development Program Review Committee
Some scattered thought on living organizations, social networks, uncertainty is pain and structure icebergs are discussed. Some business applications are offered
A New Exploration Strategy
Dr. Edward F. Crawley
Ford Professor of Engineering at MIT
Co-chair of NASA Exploration Technology Development Program Review Committee
Some scattered thought on living organizations, social networks, uncertainty is pain and structure icebergs are discussed. Some business applications are offered
Presentation by Jim Chilton (Vice President and Program Manager, Exploration Launch Systems, Boeing) at the Von Braun Memorial Symposium in Huntsville, Alabama, 22 October 2008.
<a href="http://astronautical.org/vonbraun/vonbraun-2008/session5">http://astronautical.org/vonbraun/vonbraun-2008/session5</a>
American Astronautical Society, Astronauts and Robots: Partners in Space Exploration, May 12-13, 2015 - http://astronautical.org/event/astronauts-robots
Ok, we found a new Earth nearby. Next question is: how do we get there?
The amazing challenge to get mankind to become an interstellar species and how we could potentially get there.
The different technologies involved and the key challenges to overcome.
Welcome to teh next chapter of mankind.
Presentation on Space pollution, the genesis of space debris, history, future implications, recent events, growing concern and threats.
It will be helpful for the students of science streams, disaster management courses.
Contact sujaypaulfb@gmail.com to get full access and copy of the file.
Orbit design for exoplanet discovery spacecraft dr dora musielak 1 april 2019Dora Musielak, Ph.D.
Most exoplanets have been discovered with space telescopes. Starting with an overview of rocket propulsion, this presentation introduces spacecraft trajectories in the Sun-Earth-Moon System, focusing especially on those appropriate for exoplanet detection spacecraft. It reviews past, present, and future exoplanet discovery missions.
Space Exploration Merit Badge Slide ShowTodd Cella
This is a presentation that was given at the BYU Pow-Wow 2013. Its for the Space Exploration Merit Badge and includes the necessary information for presenting the merit badge.
American Astronautical Society, Astronauts and Robots: Partners in Space Exploration, May 12-13, 2015 - http://astronautical.org/event/astronauts-robots
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Essentials of Automations: Optimizing FME Workflows with Parameters
Deep impact
1. Comet Impact:
July 4, 2005
Impact Velocity:
23,000 mph
Spacecraft Size:
Flyby spacecraft nearly as large as a
Volkswagen Beetle
automobile.
Impactor spacecraft about the same
dimensions as a
typical living room
coffee table.
2. Principal Investigator, Dr. Michael A'Hearn and his
science team want to find clues to the formation
of the solar system and more about the structure
and composition of comets by making a deep
crater in Comet Tempel 1. The objectives for the
mission are:
1. Observe how the crater forms
2. Measure the crater's depth and diameter
3. Measure the composition of the interior of the
crater and its ejecta
4. Determine the changes in natural outgassing
produced by the impact
Science Objective
3.
4. Deep Impact Quick Facts
Mission/Instrument/Task
Name:
Deep Impact
Objectives:
To study the pristine interior of a comet by excavating a crater more than 25 m
deep and 100 m in diameter.
Start Date:
11/01/1999
Launch Date:
01/12/2005
Launch Vehicle:
Delta II
Launch Site:
Eastern test range (Kennedy Space Center, Florida)
Mission Events:
(Rendezvous (distance)/
Landing (location)):
Encounter date 0600 4 July 2005 UT
Impactor separation at 24 hrs prior to impact
Approach solar phase angle: 63°
Impactor approach velocity: 10.2 km/s
Flyby S/C closest approach: 500 km
End of Mission: Data return until 08/2005 (28 days)
End of Project Date:
03/2006 (includes 9 months of data analysis)
Launch Mass (kg):
1020 kg
6. Comet Tempel 1
The interactive Path
Main Presentation
An artist's rendition of the flyby spacecraft releasing the impactor,
which will happen 24 hours before the collision
7. Crossword 1
Word search game 1
Crossword 2
Word search game 2
Crossword 3
Word search game 3
Brain Twister
Other Brain Twisters
9. This powerpoint was kindly donated to
www.worldofteaching.com
http://www.worldofteaching.com is home to over a
thousand powerpoints submitted by teachers. This is a
completely free site and requires no registration. Please
visit and I hope it will help in your teaching.
10. This powerpoint was kindly donated to
www.worldofteaching.com
http://www.worldofteaching.com is home to over a
thousand powerpoints submitted by teachers. This is a
completely free site and requires no registration. Please
visit and I hope it will help in your teaching.