Raspberry pi Part 19
•Download as PPTX, PDF•
2 likes•237 views
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools. The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers. The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Report
Share
Report
Share
Recommended
Pir motion sensor with raspberry pi
This document provides instructions for connecting a PIR motion sensor to a Raspberry Pi to detect movement. The PIR sensor's power, ground, and output pins need to be connected to the Raspberry Pi's 5V, ground, and GPIO 4 pins respectively using female-to-female jumper wires. Then a Python program can be written and run to have the sensor capture movement and print it, with the program stopped using ctrl+c and quit().
A012320115
The document discusses the optimization of a flywheel for a multi-cylinder petrol engine. It begins with an introduction to internal combustion engines and flywheels. It then discusses designing a flywheel using empirical formulas to calculate forces and drafting a 2D model. A 3D parametric model is created in Pro/Engineer and forces are analyzed in ANSYS for two materials, cast iron and aluminum alloy. The goal is to validate the flywheel strength under applied forces and compare results between materials.
MinnowBoard MAX: Open Source Hardware 64-bit x86 Single Board Computer
MinnowBoard MAX: Open Source Hardware 64-bit x86 Single Board Computer
NERP at Pumping Station: 1
Drew Fustini (@pdp7)
2014-Nov-10
● 64-bit Intel Atom E38xx “Bay Trail” SoC
● HDMI + Integrated Intel HD Graphics
+ Open Source Mainline Linux drivers
+ Enables Graphics & Video acceleration
Rasp berry Pi
The Raspberry Pi is a credit-card sized computer that can plug into a TV and keyboard to function like a desktop computer. It was developed by the Raspberry Pi Foundation to improve computer science education and is inexpensive at $25-35. The Raspberry Pi runs Linux and uses an ARM processor, has ports for HDMI, USB, Ethernet, and an SD card for storage. It can be used for programming, robotics projects, and functions as a basic computer.
Linux Format - Get Into Linux Today
Linux Format was the UK's first Linux-specific magazine, and as of 2013 was the best-selling Linux title in the UK. It is also exported to many countries worldwide. It is published by Future plc.
Temperature sensor with raspberry pi
This document provides instructions for setting up a Raspberry Pi to read temperature from a DS18B20 temperature sensor. It describes connecting the sensor to the Raspberry Pi GPIO pins and adding configuration to enable the sensor. It also includes Python and Java code samples to print the temperature reading every second.
Raspberry Pi Logger with LCD
This is a project involving the construction of a Raspberry Pi temperature sensor that would display temperature on an LCD display, as well as emailing the creator if the temperature moves above or below a threshold level.
Raspberry pi led blink
The document discusses connecting and using a DHT11 temperature and humidity sensor with a Raspberry Pi. It provides details on the DHT11 specifications, hardware setup including wiring the sensor to the Pi's GPIO pins, installing the Adafruit Python library to interface with the sensor, and examples of using the library to take readings from the sensor and output the temperature and humidity values.
Recommended
Pir motion sensor with raspberry pi
This document provides instructions for connecting a PIR motion sensor to a Raspberry Pi to detect movement. The PIR sensor's power, ground, and output pins need to be connected to the Raspberry Pi's 5V, ground, and GPIO 4 pins respectively using female-to-female jumper wires. Then a Python program can be written and run to have the sensor capture movement and print it, with the program stopped using ctrl+c and quit().
A012320115
The document discusses the optimization of a flywheel for a multi-cylinder petrol engine. It begins with an introduction to internal combustion engines and flywheels. It then discusses designing a flywheel using empirical formulas to calculate forces and drafting a 2D model. A 3D parametric model is created in Pro/Engineer and forces are analyzed in ANSYS for two materials, cast iron and aluminum alloy. The goal is to validate the flywheel strength under applied forces and compare results between materials.
MinnowBoard MAX: Open Source Hardware 64-bit x86 Single Board Computer
MinnowBoard MAX: Open Source Hardware 64-bit x86 Single Board Computer
NERP at Pumping Station: 1
Drew Fustini (@pdp7)
2014-Nov-10
● 64-bit Intel Atom E38xx “Bay Trail” SoC
● HDMI + Integrated Intel HD Graphics
+ Open Source Mainline Linux drivers
+ Enables Graphics & Video acceleration
Rasp berry Pi
The Raspberry Pi is a credit-card sized computer that can plug into a TV and keyboard to function like a desktop computer. It was developed by the Raspberry Pi Foundation to improve computer science education and is inexpensive at $25-35. The Raspberry Pi runs Linux and uses an ARM processor, has ports for HDMI, USB, Ethernet, and an SD card for storage. It can be used for programming, robotics projects, and functions as a basic computer.
Linux Format - Get Into Linux Today
Linux Format was the UK's first Linux-specific magazine, and as of 2013 was the best-selling Linux title in the UK. It is also exported to many countries worldwide. It is published by Future plc.
Temperature sensor with raspberry pi
This document provides instructions for setting up a Raspberry Pi to read temperature from a DS18B20 temperature sensor. It describes connecting the sensor to the Raspberry Pi GPIO pins and adding configuration to enable the sensor. It also includes Python and Java code samples to print the temperature reading every second.
Raspberry Pi Logger with LCD
This is a project involving the construction of a Raspberry Pi temperature sensor that would display temperature on an LCD display, as well as emailing the creator if the temperature moves above or below a threshold level.
Raspberry pi led blink
The document discusses connecting and using a DHT11 temperature and humidity sensor with a Raspberry Pi. It provides details on the DHT11 specifications, hardware setup including wiring the sensor to the Pi's GPIO pins, installing the Adafruit Python library to interface with the sensor, and examples of using the library to take readings from the sensor and output the temperature and humidity values.
Health Monitoring System using IoT.doc
This document describes a Raspberry Pi-based health monitoring system that measures heartbeat and pulse using a Pulse Sensor. The system uses an ADS1115 ADC module to read analog voltage signals from the Pulse Sensor and send the data over I2C to the Raspberry Pi. Python code is used to analyze the sensor signals and calculate the heartbeat rate, which is displayed in Processing and also sent over serial to other devices. Circuit diagrams and instructions for installing required libraries and configuring the Raspberry Pi I2C and serial interfaces are provided.
Raspberry pi-spectrum-analyzer-display-on-rgb-led-strip
This document provides instructions for building a Raspberry Pi LED spectrum analyzer that visualizes music playing through color changes on an RGB LED strip. The project uses a Raspberry Pi, RGB LED strip, audio processing software, and custom Python code to analyze the frequency spectrum of an audio file in real-time and map the low, mid, and high frequencies to color changes on the LED strip. The instructions guide the reader through connecting the hardware, installing and optimizing software to control the LED strip quickly, and customizing existing RGB light show software to drive the LED visualization.
Using raspberry pi to sense temperature and relative humidity
This document describes a Raspberry Pi-based system for monitoring temperature and relative humidity using a DHT22 sensor. The system senses the temperature and humidity using the DHT22 sensor connected to the Raspberry Pi and stores the data in a MySQL database. The temperature and humidity readings can then be accessed from any web-enabled device by entering a username and password. Python is used to program the Raspberry Pi to read data from the DHT22 sensor, store it in the database, and display it on a web interface. The system provides a low-cost way to remotely monitor temperature and humidity levels.
LED Blinking Using Raspberry Pi
Raspberry Pi is used to blink an LED by connecting it to GPIO pin 25. A resistor is added in series to limit the current. Python code is written to import GPIO and time libraries, set pin 25 as output, and toggle it between high and low voltages with 1 second delays to turn the LED on and off repeatedly.
IoT Physical Devices and End Points.pdf
Basic building blocks of an IoT Device
• Exemplary Device: Raspberry Pi
• Raspberry Pi interfaces
• Programming Raspberry Pi with Python
• Other IoT devices
5 IOT MODULE 5 RaspberryPi Programming using Python.pdf
The document provides information about programming a Raspberry Pi using Python. It discusses the Raspberry Pi hardware, operating systems that can be used like Raspbian, and describes how to connect to a Raspberry Pi remotely using SSH. It also provides examples of Python programming projects like a wireless temperature monitoring system using a Raspberry Pi, Thingspeak cloud, and LM35 sensor. The document discusses accessing temperature readings from DS18B20 sensors using the OneWire protocol and outlines methods for remotely accessing a Raspberry Pi from outside the home network.
Raspberry Pi Introductory Lecture
The document provides an outline for a course on learning Internet of Things (IoT) using Raspberry Pi, covering topics such as connecting and setting up the Raspberry Pi, programming with Python, building circuits, and creating basic IoT projects involving home automation, security monitoring, and remote control. The course structure includes introducing Raspberry Pi hardware and software, Python programming, connecting electronic components, and applying the skills learned to build a digital making project.
Rasperry pi Part 13
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Ds18 b20
The DS18B20 is a digital thermometer that can measure temperatures from -55°C to +125°C with a resolution of 9 to 12 bits. It communicates over a 1-Wire bus requiring only one data line and ground for communication. It has nonvolatile user-programmable upper and lower temperature alarm triggers. Multiple DS18B20 devices can be connected to the same 1-Wire bus, allowing temperature monitoring over a large area using one microprocessor.
Programming the Digital I/O Interface of a PIC microcontroller
The document discusses the digital I/O interface of Microchip PIC18F microcontrollers. It explains that each pin can be programmed as an input or output. As an input, the pin can read logic high or low voltages to detect button presses or sensor signals. As an output, it can generate voltages to control LEDs or other devices. The document provides examples of connecting buttons, sensors, and LEDs to digital pins and programming the pins as inputs and outputs using configuration registers to read button states and toggle an LED.
Arduino 8-step drum sequencer 3 channels
hands-on Arduino introduction making a sequencer to send 3 channels of pulse signals to a drum chip (Arduino based dsp-D8)
designed for 2 workshops at Sonar Hong Kong, 17 March 2018
Building the Internet of Things with Raspberry Pi
With the advent of the low cost Raspberry Pi computer, anyone with a soldering iron and some basic Python skills can take everyday objects and transform them into fully networked, smart devices.
In this talk, I will show you how I hacked a Raspberry Pi into my home alarm system, turning my network of IP cameras into motion triggered sensors. I will show you how to build basic input and output circuits and introduce you to the RPi.GPIO Python module. We’ll talk about how you can build a RESTful server on your Raspberry Pi to enable remote access. And finally, more ideas for hacking everyday objects around the home!
No prior electronics knowledge required.
Raspberry pi
The Raspberry Pi is a small, low-cost computer that can connect to a keyboard, mouse and monitor. It runs Linux and allows users to explore programming through languages like Scratch and Python. The Raspberry Pi has GPIO pins that enable controlling electronic components for physical computing projects. It comes in different models that vary in processing power, memory and connectivity options. Python's RPi.GPIO module allows controlling the GPIO pins to take sensor input and drive outputs. Code examples demonstrate setting pin modes, reading/writing pin values and using an IR sensor for obstacle avoidance.
Sensing Temperature with a RaspberryPi
The slides for a talk I gave to my local RaspberryPi Meetup with practical advice on how to use various classes of temperature sensors with a Raspberry Pi.
Wireless Security
How to build an Alarm system with devices and sensor that:
- are low cost
- are lower power consumption
- communicate wirelessly
Analog I/O in PIC16F877A
This lecture covers analog and digital I/O with PIC microcontrollers. It discusses analog to digital conversion (ADC) which is used to convert analog voltage inputs to digital values. The PIC16F877A has an 10-bit ADC with 8 channels. Functions for initializing and reading the ADC are presented. The first project involves using a temperature sensor and the ADC to measure and display temperature on an LCD. Pulse width modulation (PWM) for analog outputs is also discussed. The PIC16F877A has 2 PWM channels that can be initialized and have their duty cycle set using functions. The second project controls a fan speed using PWM and a variable resistor. The lecture ends with time for questions.
Build your first android things application
The document provides an introduction to building Android Things applications on Raspberry Pi hardware. It discusses:
- Connecting a Raspberry Pi to a computer and accessing it over WiFi or Ethernet
- Setting up an Android Things project in Android Studio and differences from a mobile app
- Accessing hardware components like GPIO pins to control devices
- Using the Peripheral Driver Library to interface with sensors
- An example "Smart Switch" app that controls lights and fans over WiFi using a Firebase database
Arduino to Control Bulbs using Web App
In this project we are going to light the bulb from remote location using web services. In this we are going to use one Arduino interfacing with 12 bulb using 3 relay module with low level trigger. We can trigger the relay from anywhere in the world using a website in which we’ll have GUI Button. In each trigger of relay the correspondence Bulb or group of bulb will glow.
Wireless Temperature Measurement with LabVIEW and Spartan3E
This document describes a project to create a wireless temperature measurement system using a Xilinx Spartan-3E FPGA starter board. The temperature sensor is a PT-100 analog sensor which is connected to an ADC on the FPGA board to convert the sensor reading to digital form. LabVIEW FPGA is used as the programming tool to design the program on the FPGA. The digital temperature readings from the FPGA are then sent wirelessly to a host PC using a ZigBee interface.
Raspberry pi Part 26
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 25
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
More Related Content
Similar to Raspberry pi Part 19
Health Monitoring System using IoT.doc
This document describes a Raspberry Pi-based health monitoring system that measures heartbeat and pulse using a Pulse Sensor. The system uses an ADS1115 ADC module to read analog voltage signals from the Pulse Sensor and send the data over I2C to the Raspberry Pi. Python code is used to analyze the sensor signals and calculate the heartbeat rate, which is displayed in Processing and also sent over serial to other devices. Circuit diagrams and instructions for installing required libraries and configuring the Raspberry Pi I2C and serial interfaces are provided.
Raspberry pi-spectrum-analyzer-display-on-rgb-led-strip
This document provides instructions for building a Raspberry Pi LED spectrum analyzer that visualizes music playing through color changes on an RGB LED strip. The project uses a Raspberry Pi, RGB LED strip, audio processing software, and custom Python code to analyze the frequency spectrum of an audio file in real-time and map the low, mid, and high frequencies to color changes on the LED strip. The instructions guide the reader through connecting the hardware, installing and optimizing software to control the LED strip quickly, and customizing existing RGB light show software to drive the LED visualization.
Using raspberry pi to sense temperature and relative humidity
This document describes a Raspberry Pi-based system for monitoring temperature and relative humidity using a DHT22 sensor. The system senses the temperature and humidity using the DHT22 sensor connected to the Raspberry Pi and stores the data in a MySQL database. The temperature and humidity readings can then be accessed from any web-enabled device by entering a username and password. Python is used to program the Raspberry Pi to read data from the DHT22 sensor, store it in the database, and display it on a web interface. The system provides a low-cost way to remotely monitor temperature and humidity levels.
LED Blinking Using Raspberry Pi
Raspberry Pi is used to blink an LED by connecting it to GPIO pin 25. A resistor is added in series to limit the current. Python code is written to import GPIO and time libraries, set pin 25 as output, and toggle it between high and low voltages with 1 second delays to turn the LED on and off repeatedly.
IoT Physical Devices and End Points.pdf
Basic building blocks of an IoT Device
• Exemplary Device: Raspberry Pi
• Raspberry Pi interfaces
• Programming Raspberry Pi with Python
• Other IoT devices
5 IOT MODULE 5 RaspberryPi Programming using Python.pdf
The document provides information about programming a Raspberry Pi using Python. It discusses the Raspberry Pi hardware, operating systems that can be used like Raspbian, and describes how to connect to a Raspberry Pi remotely using SSH. It also provides examples of Python programming projects like a wireless temperature monitoring system using a Raspberry Pi, Thingspeak cloud, and LM35 sensor. The document discusses accessing temperature readings from DS18B20 sensors using the OneWire protocol and outlines methods for remotely accessing a Raspberry Pi from outside the home network.
Raspberry Pi Introductory Lecture
The document provides an outline for a course on learning Internet of Things (IoT) using Raspberry Pi, covering topics such as connecting and setting up the Raspberry Pi, programming with Python, building circuits, and creating basic IoT projects involving home automation, security monitoring, and remote control. The course structure includes introducing Raspberry Pi hardware and software, Python programming, connecting electronic components, and applying the skills learned to build a digital making project.
Rasperry pi Part 13
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Ds18 b20
The DS18B20 is a digital thermometer that can measure temperatures from -55°C to +125°C with a resolution of 9 to 12 bits. It communicates over a 1-Wire bus requiring only one data line and ground for communication. It has nonvolatile user-programmable upper and lower temperature alarm triggers. Multiple DS18B20 devices can be connected to the same 1-Wire bus, allowing temperature monitoring over a large area using one microprocessor.
Programming the Digital I/O Interface of a PIC microcontroller
The document discusses the digital I/O interface of Microchip PIC18F microcontrollers. It explains that each pin can be programmed as an input or output. As an input, the pin can read logic high or low voltages to detect button presses or sensor signals. As an output, it can generate voltages to control LEDs or other devices. The document provides examples of connecting buttons, sensors, and LEDs to digital pins and programming the pins as inputs and outputs using configuration registers to read button states and toggle an LED.
Arduino 8-step drum sequencer 3 channels
hands-on Arduino introduction making a sequencer to send 3 channels of pulse signals to a drum chip (Arduino based dsp-D8)
designed for 2 workshops at Sonar Hong Kong, 17 March 2018
Building the Internet of Things with Raspberry Pi
With the advent of the low cost Raspberry Pi computer, anyone with a soldering iron and some basic Python skills can take everyday objects and transform them into fully networked, smart devices.
In this talk, I will show you how I hacked a Raspberry Pi into my home alarm system, turning my network of IP cameras into motion triggered sensors. I will show you how to build basic input and output circuits and introduce you to the RPi.GPIO Python module. We’ll talk about how you can build a RESTful server on your Raspberry Pi to enable remote access. And finally, more ideas for hacking everyday objects around the home!
No prior electronics knowledge required.
Raspberry pi
The Raspberry Pi is a small, low-cost computer that can connect to a keyboard, mouse and monitor. It runs Linux and allows users to explore programming through languages like Scratch and Python. The Raspberry Pi has GPIO pins that enable controlling electronic components for physical computing projects. It comes in different models that vary in processing power, memory and connectivity options. Python's RPi.GPIO module allows controlling the GPIO pins to take sensor input and drive outputs. Code examples demonstrate setting pin modes, reading/writing pin values and using an IR sensor for obstacle avoidance.
Sensing Temperature with a RaspberryPi
The slides for a talk I gave to my local RaspberryPi Meetup with practical advice on how to use various classes of temperature sensors with a Raspberry Pi.
Wireless Security
How to build an Alarm system with devices and sensor that:
- are low cost
- are lower power consumption
- communicate wirelessly
Analog I/O in PIC16F877A
This lecture covers analog and digital I/O with PIC microcontrollers. It discusses analog to digital conversion (ADC) which is used to convert analog voltage inputs to digital values. The PIC16F877A has an 10-bit ADC with 8 channels. Functions for initializing and reading the ADC are presented. The first project involves using a temperature sensor and the ADC to measure and display temperature on an LCD. Pulse width modulation (PWM) for analog outputs is also discussed. The PIC16F877A has 2 PWM channels that can be initialized and have their duty cycle set using functions. The second project controls a fan speed using PWM and a variable resistor. The lecture ends with time for questions.
Build your first android things application
The document provides an introduction to building Android Things applications on Raspberry Pi hardware. It discusses:
- Connecting a Raspberry Pi to a computer and accessing it over WiFi or Ethernet
- Setting up an Android Things project in Android Studio and differences from a mobile app
- Accessing hardware components like GPIO pins to control devices
- Using the Peripheral Driver Library to interface with sensors
- An example "Smart Switch" app that controls lights and fans over WiFi using a Firebase database
Arduino to Control Bulbs using Web App
In this project we are going to light the bulb from remote location using web services. In this we are going to use one Arduino interfacing with 12 bulb using 3 relay module with low level trigger. We can trigger the relay from anywhere in the world using a website in which we’ll have GUI Button. In each trigger of relay the correspondence Bulb or group of bulb will glow.
Wireless Temperature Measurement with LabVIEW and Spartan3E
This document describes a project to create a wireless temperature measurement system using a Xilinx Spartan-3E FPGA starter board. The temperature sensor is a PT-100 analog sensor which is connected to an ADC on the FPGA board to convert the sensor reading to digital form. LabVIEW FPGA is used as the programming tool to design the program on the FPGA. The digital temperature readings from the FPGA are then sent wirelessly to a host PC using a ZigBee interface.
Similar to Raspberry pi Part 19 (20)
Raspberry pi-spectrum-analyzer-display-on-rgb-led-strip
Raspberry pi-spectrum-analyzer-display-on-rgb-led-strip
Using raspberry pi to sense temperature and relative humidity
Using raspberry pi to sense temperature and relative humidity
5 IOT MODULE 5 RaspberryPi Programming using Python.pdf
5 IOT MODULE 5 RaspberryPi Programming using Python.pdf
Programming the Digital I/O Interface of a PIC microcontroller
Programming the Digital I/O Interface of a PIC microcontroller
Raspberry Pi 2 pertemuan 14(pengenalan breadboard).pptx
Raspberry Pi 2 pertemuan 14(pengenalan breadboard).pptx
Wireless Temperature Measurement with LabVIEW and Spartan3E
Wireless Temperature Measurement with LabVIEW and Spartan3E
More from Techvilla
Raspberry pi Part 26
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 25
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 24
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 23
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 22
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 21
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 20
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 18
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 17
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 16
This document discusses interfacing an RGB LED with a Raspberry Pi using pulse width modulation (PWM). It provides an overview of RGB LEDs and PWM, describing how PWM works by rapidly switching power on and off faster than what affects the load. It then gives examples of code in Python to control an RGB LED connected to GPIO pins on the Raspberry Pi by changing the duty cycle from 1-100% to gradually change the color.
Rasperry pi Part 15
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Rasperry pi Part 12
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Rasperry pi Part 10
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Rasperry pi Part 9
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Rasperry pi Part 8
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Rasperry pi Part 7
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 6
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 5
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 4
The Raspberry Pi is a series of credit card–sized single-board computers developed in the UK by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools.
The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. These companies sell the Raspberry Pi online. Egoman produces a version for distribution solely in China and Taiwan, which can be distinguished from other Pis by their red colouring and lack of FCC/CE marks. The hardware is the same across all manufacturers.
The original Raspberry Pi is based on the Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and was originally shipped with 256 megabytes of RAM, later upgraded (models B and B+) to 512 MB. The system has Secure Digital (SD) (models A and B) or MicroSD (models A+ and B+) sockets for boot media and persistent storage.
Raspberry pi Part 3
The document discusses the C compiler gcc. It can be used to compile C and C++ programs on Linux and other platforms. Gcc performs preprocessing, compilation, assembly, and linking. Common gcc options include -c to compile only, -o to specify an output filename, -g for debugging symbols, -Wall for warnings, and -O for optimizations. The -c option generates object files without linking, while -o can specify the output filename for object files or executables.
More from Techvilla (20)
Recently uploaded
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Recently uploaded (20)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Raspberry pi Part 19
- 2. www.techvilla.org.in Temperature measurement with rasp-pi DS18b20. Interfacing ds18b20 with raspberry pi. Writing code in python to measure temperature.
- 4. www.techvilla.org.in 1-wire temperature sensor The Raspberry Pi does not have any ADC (analogue to digital converter) pins in its GPIO, and so a digital temperature sensor should be used. The sensor of choice around the world is the Dallas DS18B20 1-Wire temperature sensor pictured above. They are relatively cheap, very easy to find, easy to use, and supply readings accurate to +/-0.5 degrees across the range -10 to +85 degrees Celcius. In order to interface this with the Raspberry Pi we just need one resistor - a 4k7 which acts as a pull-up resistor
- 6. www.techvilla.org.in Raspberry Pi and DS18B20 Temperature Sensor - Python Log on to your Raspberry Pi, and at the command prompt enter the following: sudo nano /boot/config.txt to open the /boot/config.txt file for editing. Then scroll down to the bottom of the file, and add the line: dtoverlay=w1-gpio Now at the command prompt enter: ls -l /sys/bus/w1/devices/ to see a list of the devices currently connected to your Raspberry Pi.