Datasheet.hk m35sp 9-4813634
•
0 likes•65 views
The document provides specifications for two stepping motor models, the M35SP-9 and M35SP-10N, from Mitsumi. Both models have a 35mm outer diameter and different step angles. The M35SP-9 has a 7.5 degree step angle while the M35SP-10N has a 3.75 degree step angle. The document lists key features, specifications, torque characteristics, and dimensional drawings for the two motor models. It notes they offer compact size, high output torque, quiet operation, and are suitable for uses in printers, multifunction machines, copiers, and fax machines.
Report
Share
Report
Share
Download to read offline
Recommended
Npm ptm24h specsheet
This document provides specifications for the Nippon Pulse Synchronous Motors models PTM-24H and PTM-24HG. The PTM-24H is a synchronous motor with a rated voltage of 24/100/117/200V, maximum torque of 22/21.5 mN·m, and weight of 160g. The PTM-24HG is a geared version of the PTM-24H with higher torque output and a weight of 200g. Dimensional drawings and additional details are given for both motor models.
2.flat belts & sample problem
This document provides information and steps to design a flat belt drive system to transmit 20 kW of power at 720 rpm from a driving pulley to a driven pulley with a speed ratio of 3 and center distance of 3 meters.
The standard pulley diameters are selected as 400 mm for the driver and 1200 mm for the driven pulley. The design power is calculated to be 25 kW considering a shock load, arc of contact of 164 degrees, and transmission ratio of 3. A 6-ply 112 mm wide Dunlop "FORT" belt is selected to transmit this power.
The length of the belt is calculated to be 8566.6 mm. The pulley widths are selected as 125 mm with 4 arms for
Kw3518711873
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
TAMU MEEN 475 Group D Presentation F2017
The document analyzes the materials and design of a modular car scissor jack. It discusses the stresses experienced by different jack components and evaluates material candidates using merit indices and Ashby plots. Silicon carbide, GFRP, and alumina were ranked highest for the jack arms. Titanium alloy and magnesium alloy were best for the plates. Carbon steel was selected for the screw and pins based on its strength and cost advantages over alternatives like titanium and aluminum alloys. Finite element analysis found a safety factor of 45 for a 1000 N load using GFRP arms.
IRJET- An Analytical Study on Application of Virtual Outrigger in Tall Bu...
This document analyzes the use of virtual outriggers in an 80-story building to reduce lateral displacement and drift under seismic loads. A building model was created and conventional outriggers were added at different heights to determine the optimum positions. Virtual outriggers were then modeled which connect the core to the belt truss through rigid floor slabs instead of physical beams. Response spectrum analysis showed virtual outriggers reduced maximum displacement by 31% and drift by 34% compared to the bare frame. Different belt truss configurations were also analyzed, with X-bracing found to be most effective. Virtual outriggers were found to help resist progressive collapse by distributing gravity loads.
Chassis design for baja sae
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
IRJET-Finite Element Analysis of Seat Belt Frame Assembly
This document presents a finite element analysis of a seat belt frame assembly. It aims to analyze deformation and von misses stress in the latch plate under different loads and thicknesses. Five case studies are conducted varying the thickness from 8mm to 4mm and loads from 63.5N to 350N. The results show that as thickness decreases, von misses stress increases. Failure occurs at 7mm thickness and 350N load. The latch plate is safe up to 250N for all thicknesses. An 8mm thick plate can withstand loads up to 350N. Deformations are negligible for all loads and thicknesses. Therefore, the optimal thickness for withstanding all loads is 8mm.
IRJET - Design and Analysis of BAJA Rollcage
This document describes the design and finite element analysis of a roll cage for an all-terrain vehicle (ATV). The roll cage is designed to withstand forces from various impact directions. AISI 4130 steel is selected for its strength, durability, and weldability. The roll cage geometry is modeled in CAD software and analyzed in ANSYS for front, rear, side impacts and rollover. Front impact analysis at 7G deceleration showed a maximum von Mises stress of 623 MPa and a safety factor of 1.04, indicating the design is safe. Similar analyses were performed for rear and side impacts.
Recommended
Npm ptm24h specsheet
This document provides specifications for the Nippon Pulse Synchronous Motors models PTM-24H and PTM-24HG. The PTM-24H is a synchronous motor with a rated voltage of 24/100/117/200V, maximum torque of 22/21.5 mN·m, and weight of 160g. The PTM-24HG is a geared version of the PTM-24H with higher torque output and a weight of 200g. Dimensional drawings and additional details are given for both motor models.
2.flat belts & sample problem
This document provides information and steps to design a flat belt drive system to transmit 20 kW of power at 720 rpm from a driving pulley to a driven pulley with a speed ratio of 3 and center distance of 3 meters.
The standard pulley diameters are selected as 400 mm for the driver and 1200 mm for the driven pulley. The design power is calculated to be 25 kW considering a shock load, arc of contact of 164 degrees, and transmission ratio of 3. A 6-ply 112 mm wide Dunlop "FORT" belt is selected to transmit this power.
The length of the belt is calculated to be 8566.6 mm. The pulley widths are selected as 125 mm with 4 arms for
Kw3518711873
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
TAMU MEEN 475 Group D Presentation F2017
The document analyzes the materials and design of a modular car scissor jack. It discusses the stresses experienced by different jack components and evaluates material candidates using merit indices and Ashby plots. Silicon carbide, GFRP, and alumina were ranked highest for the jack arms. Titanium alloy and magnesium alloy were best for the plates. Carbon steel was selected for the screw and pins based on its strength and cost advantages over alternatives like titanium and aluminum alloys. Finite element analysis found a safety factor of 45 for a 1000 N load using GFRP arms.
IRJET- An Analytical Study on Application of Virtual Outrigger in Tall Bu...
This document analyzes the use of virtual outriggers in an 80-story building to reduce lateral displacement and drift under seismic loads. A building model was created and conventional outriggers were added at different heights to determine the optimum positions. Virtual outriggers were then modeled which connect the core to the belt truss through rigid floor slabs instead of physical beams. Response spectrum analysis showed virtual outriggers reduced maximum displacement by 31% and drift by 34% compared to the bare frame. Different belt truss configurations were also analyzed, with X-bracing found to be most effective. Virtual outriggers were found to help resist progressive collapse by distributing gravity loads.
Chassis design for baja sae
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
IRJET-Finite Element Analysis of Seat Belt Frame Assembly
This document presents a finite element analysis of a seat belt frame assembly. It aims to analyze deformation and von misses stress in the latch plate under different loads and thicknesses. Five case studies are conducted varying the thickness from 8mm to 4mm and loads from 63.5N to 350N. The results show that as thickness decreases, von misses stress increases. Failure occurs at 7mm thickness and 350N load. The latch plate is safe up to 250N for all thicknesses. An 8mm thick plate can withstand loads up to 350N. Deformations are negligible for all loads and thicknesses. Therefore, the optimal thickness for withstanding all loads is 8mm.
IRJET - Design and Analysis of BAJA Rollcage
This document describes the design and finite element analysis of a roll cage for an all-terrain vehicle (ATV). The roll cage is designed to withstand forces from various impact directions. AISI 4130 steel is selected for its strength, durability, and weldability. The roll cage geometry is modeled in CAD software and analyzed in ANSYS for front, rear, side impacts and rollover. Front impact analysis at 7G deceleration showed a maximum von Mises stress of 623 MPa and a safety factor of 1.04, indicating the design is safe. Similar analyses were performed for rear and side impacts.
Steel Fabrication Solutions - Steelmax
The Steelmax Max Lifter series are compact lifting magnets that use permanent magnets, requiring no electrical power. They can lift, transport, and release loads rapidly with a simple lever motion. The magnets are tested to three times their recommended load capacity and have few moving parts, making them robust and reliable for long-term maintenance-free use in moving metal objects. They are available in various load capacities from 110 to 4,400 pounds.
ME 6061 important ques
This document contains a question bank for the course ME1352 Design of Transmission Systems. It includes questions and design problems related to various types of flexible element drives (wire ropes, chains, belts), gears (spur, helical, bevel, worm), and gearboxes. The questions cover topics like types of wire ropes, chordal action in chains, pulley crowning, advantages of silent chains over ordinary chains, belt drive losses, and more. The design problems involve sizing drives for given power and speed requirements.
Npm scr 75_specsheet
The document describes the Nippon Pulse SCR-075 nanopositioning stage, which integrates a linear slide guide, encoder, and linear shaft motor. The linear shaft motor offers higher resolution, speed, and continuous force compared to stepper or piezo motors. The stage is available in travel lengths of 50, 100, and 150mm. It provides high accuracy, repeatability, and load capacity. Customizable linear shaft motors and driver electronics are included to operate the stage.
presentation on car for SUPRA event
This document provides an overview of Team Vega, a student formula team from JSS Academy of Technical Education, Noida. It describes the vehicle design including dimensions, materials used, analysis conducted, suspension geometry, steering, brakes, engine and powertrain selection and specifications. It also includes information on the project timeline, costs, facilities and an overview of the key vehicle specifications.
Baja SAE India 2013
This document provides information about Team Auto Architects' design of an ATV for the Baja SAE India 2013 competition. It summarizes the team composition, management structure, and technical areas. Key technical specifications of the designed ATV are presented, including performance targets, dimensions, suspension design, and innovations to reduce emissions. Finite element analysis was conducted on the roll cage design. Experimental stress analysis using strain gauges validated the FEA results. The project plan outlines conceptual, development, and implementation phases.
UTM Machine
This document describes a project to design and fabricate a small universal testing machine (UTM) at CECOS University. A group of 4 students led the project under the guidance of an advisor and co-advisor. The UTM will be capable of performing tensile and compressive tests on soft materials like aluminum and plastics. It will weigh approximately 70kg and have dimensions of 80cm. The main components include steel plates, columns, power screws, sensors, and a stepper motor. Mild steel was selected as the primary material and fabrication involved various machining processes like cutting, drilling, grinding, and welding. The document outlines the subassemblies, final assembly, testing plans, and references used.
IRJET- Design and Analysis of Single Sided Swing ARM for Modified Bike
This document describes the design and analysis of a single-sided swing arm for a modified motorcycle. It discusses the components and purpose of a standard swing arm, and then outlines the process undertaken to design a single-sided version. This included selecting AISI 1018 steel as the material, calculating load cases for various riding conditions, and using CAD software to model the design. Finite element analysis was then performed in ANSYS to validate the design, showing von Mises stresses and deformations below yield strength limits. The conclusion is that the single-sided swing arm design achieves significant weight reduction while providing sufficient performance for actual use conditions.
SUPRA SAE
The document summarizes a presentation on the design of an FSAE supra vehicle. A team of engineering students designed a small formula-style race car to meet competition rules while ensuring performance and safety. Key aspects of the design included a lightweight chassis, pushrod suspension for improved handling, and safety features like fire extinguishers. Analysis showed the frame could withstand significant impact forces with a safety factor of 1.74. The final vehicle design was 4.12 meters long, 1.8 meters wide, and weighed 350 kilograms.
Ijariie1189
This document summarizes the design and standardization of a scissor jack to avoid failures in the field. It presents the objectives of modifying the current jack design to improve reliability and reduce costs. It also describes developing a mathematical model for scissor jack design using inputs like vehicle weight and ground clearance. The design process involves modeling the jack in CATIA and developing equations in MATLAB to size components like the power screw, links, and nuts based on applied loads and stresses. Testing procedures are outlined to validate the jack's performance under different load conditions.
IRJET- Design & Manufacturing of Double Wishbone Suspension and Wheel Ass...
This document describes the design and manufacturing of a double wishbone suspension system and wheel assembly for a formula-style electric vehicle. It discusses the objectives to withstand high-speed cornering over bumps. The methodology includes designing the components in CATIA and SolidWorks, analyzing them in ANSYS and simulating the suspension system in MSC ADAMS. The key components designed are the wishbones, upright, hub, and spring. Materials are selected based on objectives like strength and weight. Static analysis of the wheel assembly and simulation of the suspension kinematics are presented. The manufacturing process of the wishbones by cutting, grinding, fitting and welding is also outlined.
open web girder
Open web girders (OWG) are bridge structures where the web part is only partially filled. This allows OWGs to be lighter than closed web girders while still providing enough structural strength. OWGs are commonly used for railway bridges due to their ability to support large spans without intermediate columns and resist lateral loads through their open web design. The document discusses the types, fabrication, merits, and uses of OWGs, concluding that they provide an economical support structure for applications like bridges over rivers and valleys.
Macron belt drive12_specsheet
This document provides specifications for the Macron Single Belt Drive 12 mechanical belt drive system. The belt drive can be customized with lengths up to 20 feet and is used in conjunction with an external guide bearing system. It features a corrosion resistant aluminum body with T-slots for mounting, a steel reinforced polyurethane timing belt, and a shafted pulley machined from one piece of stress proof steel to maintain zero backlash. Optional components include stainless steel materials and different motor mounting and beam size options.
D30 f
The Escorts-Doosan D30F forklift has been supplied in the market for 5 years. It has a rated load capacity of 3,000 kg and is powered by a low fuel consumption, emissions compliant diesel engine. The D30F has advantages over competitors such as a rugged transaxle design with reduced vibration and leakage, a strong forged rear axle, high lifting and travel speeds, and a compact turning radius. It can handle more pallets per day than comparable Toyota and Mitsubishi forklifts, increasing productivity. The D30F is suitable for applications in heavy industry, cotton and jute handling, paper industries, foam industries, and other sectors.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. It describes how previous speed control methods using resistors and transformers were large, expensive, and inefficient to control remotely. The chopper circuit allows for smaller, more efficient DC motor operation by reducing current ripple and heat, increasing motor lifetime. In this project, buttons will be used to vary the firing angle of MOSFETs in the chopper circuit to control motor speed, with lower firing angles resulting in higher speeds. A block diagram of the chopper circuit is also included.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. A chopper circuit uses MOSFETs to vary the voltage applied to the motor, allowing for remote speed control. This method is more efficient and compact than previous variable resistor and transformer-based controls. Pressing buttons on the chopper circuit varies the MOSFET firing angle, decreasing motor speed as the firing angle increases. The chopper control reduces motor current, losses, temperature, noise, and increases lifetime compared to DC operation.
BAJA SAEINDIA 2014 Team Abhedya Racing
This document is a presentation of the designed ATV by Team Abhedya who secured overall rank 13th out of 325 team in the India on their debut performance.
2015 UTSA Baja SAE Design Report
The document summarizes the design of an off-road vehicle created by University of Texas at San Antonio students for the 2015 Baja SAE competition. It describes the design of the front and rear suspension systems, drivetrain, controls including steering and braking, and the frame. Analysis was conducted using software tools to optimize various components for performance over rough terrain while maintaining structural integrity. The vehicle was designed with a focus on safety, manufacturability, durability and performance given engineering and economic constraints.
4 t crawler crane melbourne
The larges of our crawler cranes, the 4t can still access tight sites however lift heavier loads then it counterparts.
Features include:
16m Reach
Tight Access
Electric option for indoor operation
210kg at 16m
Dimensions: 1.4m Wide x 5m Long x 1.99m High
Leading Mini Crawler Crane Hire Service Provider: Call Today
DV Cranes specialises in Mini crawler crane hire to sites across Australia. All our cranes are hydraulic and mounted on a tracked undercarriage. Telescopic 4t cranes are ready for work immediately on arrival at the site. For more information on our hire packages and services,
ROEHM VICES
This document provides a catalog of vices from Röhm including NC-Compact vices, twin vices, self-centering vices, machine vices, drilling machine vices, and grinding/inspection vices. It lists the features, specifications, and applications for each vice model. The catalog contains detailed technical information on jaw widths, clamping ranges, dimensions, forces, and weights to aid customers in selecting the appropriate vice for their needs.
Smart Machine Tool - Milling Series
The document describes the SM Series of high performance machining centers from Smart Machine Tool. It provides specifications for several models including the SM 212/312/412/316, SM 600/1000, and SM 965/1165/1365/1565/1575. Key features highlighted include box way construction, spindle configurations with up to 12,000 rpm, tool changers with 24-40 tools, rigid machine structures, and chip removal systems.
More Related Content
What's hot
Steel Fabrication Solutions - Steelmax
The Steelmax Max Lifter series are compact lifting magnets that use permanent magnets, requiring no electrical power. They can lift, transport, and release loads rapidly with a simple lever motion. The magnets are tested to three times their recommended load capacity and have few moving parts, making them robust and reliable for long-term maintenance-free use in moving metal objects. They are available in various load capacities from 110 to 4,400 pounds.
ME 6061 important ques
This document contains a question bank for the course ME1352 Design of Transmission Systems. It includes questions and design problems related to various types of flexible element drives (wire ropes, chains, belts), gears (spur, helical, bevel, worm), and gearboxes. The questions cover topics like types of wire ropes, chordal action in chains, pulley crowning, advantages of silent chains over ordinary chains, belt drive losses, and more. The design problems involve sizing drives for given power and speed requirements.
Npm scr 75_specsheet
The document describes the Nippon Pulse SCR-075 nanopositioning stage, which integrates a linear slide guide, encoder, and linear shaft motor. The linear shaft motor offers higher resolution, speed, and continuous force compared to stepper or piezo motors. The stage is available in travel lengths of 50, 100, and 150mm. It provides high accuracy, repeatability, and load capacity. Customizable linear shaft motors and driver electronics are included to operate the stage.
presentation on car for SUPRA event
This document provides an overview of Team Vega, a student formula team from JSS Academy of Technical Education, Noida. It describes the vehicle design including dimensions, materials used, analysis conducted, suspension geometry, steering, brakes, engine and powertrain selection and specifications. It also includes information on the project timeline, costs, facilities and an overview of the key vehicle specifications.
Baja SAE India 2013
This document provides information about Team Auto Architects' design of an ATV for the Baja SAE India 2013 competition. It summarizes the team composition, management structure, and technical areas. Key technical specifications of the designed ATV are presented, including performance targets, dimensions, suspension design, and innovations to reduce emissions. Finite element analysis was conducted on the roll cage design. Experimental stress analysis using strain gauges validated the FEA results. The project plan outlines conceptual, development, and implementation phases.
UTM Machine
This document describes a project to design and fabricate a small universal testing machine (UTM) at CECOS University. A group of 4 students led the project under the guidance of an advisor and co-advisor. The UTM will be capable of performing tensile and compressive tests on soft materials like aluminum and plastics. It will weigh approximately 70kg and have dimensions of 80cm. The main components include steel plates, columns, power screws, sensors, and a stepper motor. Mild steel was selected as the primary material and fabrication involved various machining processes like cutting, drilling, grinding, and welding. The document outlines the subassemblies, final assembly, testing plans, and references used.
IRJET- Design and Analysis of Single Sided Swing ARM for Modified Bike
This document describes the design and analysis of a single-sided swing arm for a modified motorcycle. It discusses the components and purpose of a standard swing arm, and then outlines the process undertaken to design a single-sided version. This included selecting AISI 1018 steel as the material, calculating load cases for various riding conditions, and using CAD software to model the design. Finite element analysis was then performed in ANSYS to validate the design, showing von Mises stresses and deformations below yield strength limits. The conclusion is that the single-sided swing arm design achieves significant weight reduction while providing sufficient performance for actual use conditions.
SUPRA SAE
The document summarizes a presentation on the design of an FSAE supra vehicle. A team of engineering students designed a small formula-style race car to meet competition rules while ensuring performance and safety. Key aspects of the design included a lightweight chassis, pushrod suspension for improved handling, and safety features like fire extinguishers. Analysis showed the frame could withstand significant impact forces with a safety factor of 1.74. The final vehicle design was 4.12 meters long, 1.8 meters wide, and weighed 350 kilograms.
Ijariie1189
This document summarizes the design and standardization of a scissor jack to avoid failures in the field. It presents the objectives of modifying the current jack design to improve reliability and reduce costs. It also describes developing a mathematical model for scissor jack design using inputs like vehicle weight and ground clearance. The design process involves modeling the jack in CATIA and developing equations in MATLAB to size components like the power screw, links, and nuts based on applied loads and stresses. Testing procedures are outlined to validate the jack's performance under different load conditions.
IRJET- Design & Manufacturing of Double Wishbone Suspension and Wheel Ass...
This document describes the design and manufacturing of a double wishbone suspension system and wheel assembly for a formula-style electric vehicle. It discusses the objectives to withstand high-speed cornering over bumps. The methodology includes designing the components in CATIA and SolidWorks, analyzing them in ANSYS and simulating the suspension system in MSC ADAMS. The key components designed are the wishbones, upright, hub, and spring. Materials are selected based on objectives like strength and weight. Static analysis of the wheel assembly and simulation of the suspension kinematics are presented. The manufacturing process of the wishbones by cutting, grinding, fitting and welding is also outlined.
open web girder
Open web girders (OWG) are bridge structures where the web part is only partially filled. This allows OWGs to be lighter than closed web girders while still providing enough structural strength. OWGs are commonly used for railway bridges due to their ability to support large spans without intermediate columns and resist lateral loads through their open web design. The document discusses the types, fabrication, merits, and uses of OWGs, concluding that they provide an economical support structure for applications like bridges over rivers and valleys.
Macron belt drive12_specsheet
This document provides specifications for the Macron Single Belt Drive 12 mechanical belt drive system. The belt drive can be customized with lengths up to 20 feet and is used in conjunction with an external guide bearing system. It features a corrosion resistant aluminum body with T-slots for mounting, a steel reinforced polyurethane timing belt, and a shafted pulley machined from one piece of stress proof steel to maintain zero backlash. Optional components include stainless steel materials and different motor mounting and beam size options.
D30 f
The Escorts-Doosan D30F forklift has been supplied in the market for 5 years. It has a rated load capacity of 3,000 kg and is powered by a low fuel consumption, emissions compliant diesel engine. The D30F has advantages over competitors such as a rugged transaxle design with reduced vibration and leakage, a strong forged rear axle, high lifting and travel speeds, and a compact turning radius. It can handle more pallets per day than comparable Toyota and Mitsubishi forklifts, increasing productivity. The D30F is suitable for applications in heavy industry, cotton and jute handling, paper industries, foam industries, and other sectors.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. It describes how previous speed control methods using resistors and transformers were large, expensive, and inefficient to control remotely. The chopper circuit allows for smaller, more efficient DC motor operation by reducing current ripple and heat, increasing motor lifetime. In this project, buttons will be used to vary the firing angle of MOSFETs in the chopper circuit to control motor speed, with lower firing angles resulting in higher speeds. A block diagram of the chopper circuit is also included.
Chopper based dc motor speed control
This document discusses using a chopper circuit to control the speed of a DC motor. A chopper circuit uses MOSFETs to vary the voltage applied to the motor, allowing for remote speed control. This method is more efficient and compact than previous variable resistor and transformer-based controls. Pressing buttons on the chopper circuit varies the MOSFET firing angle, decreasing motor speed as the firing angle increases. The chopper control reduces motor current, losses, temperature, noise, and increases lifetime compared to DC operation.
BAJA SAEINDIA 2014 Team Abhedya Racing
This document is a presentation of the designed ATV by Team Abhedya who secured overall rank 13th out of 325 team in the India on their debut performance.
2015 UTSA Baja SAE Design Report
The document summarizes the design of an off-road vehicle created by University of Texas at San Antonio students for the 2015 Baja SAE competition. It describes the design of the front and rear suspension systems, drivetrain, controls including steering and braking, and the frame. Analysis was conducted using software tools to optimize various components for performance over rough terrain while maintaining structural integrity. The vehicle was designed with a focus on safety, manufacturability, durability and performance given engineering and economic constraints.
What's hot (18)
IRJET- Design and Analysis of Single Sided Swing ARM for Modified Bike
IRJET- Design and Analysis of Single Sided Swing ARM for Modified Bike
IRJET- Design & Manufacturing of Double Wishbone Suspension and Wheel Ass...
IRJET- Design & Manufacturing of Double Wishbone Suspension and Wheel Ass...
Similar to Datasheet.hk m35sp 9-4813634
4 t crawler crane melbourne
The larges of our crawler cranes, the 4t can still access tight sites however lift heavier loads then it counterparts.
Features include:
16m Reach
Tight Access
Electric option for indoor operation
210kg at 16m
Dimensions: 1.4m Wide x 5m Long x 1.99m High
Leading Mini Crawler Crane Hire Service Provider: Call Today
DV Cranes specialises in Mini crawler crane hire to sites across Australia. All our cranes are hydraulic and mounted on a tracked undercarriage. Telescopic 4t cranes are ready for work immediately on arrival at the site. For more information on our hire packages and services,
ROEHM VICES
This document provides a catalog of vices from Röhm including NC-Compact vices, twin vices, self-centering vices, machine vices, drilling machine vices, and grinding/inspection vices. It lists the features, specifications, and applications for each vice model. The catalog contains detailed technical information on jaw widths, clamping ranges, dimensions, forces, and weights to aid customers in selecting the appropriate vice for their needs.
Smart Machine Tool - Milling Series
The document describes the SM Series of high performance machining centers from Smart Machine Tool. It provides specifications for several models including the SM 212/312/412/316, SM 600/1000, and SM 965/1165/1365/1565/1575. Key features highlighted include box way construction, spindle configurations with up to 12,000 rpm, tool changers with 24-40 tools, rigid machine structures, and chip removal systems.
Sai Extrumech Company Profile
Sai Extrumech Pvt. Ltd. is an Indian company that specializes in manufacturing extrusion lines, extruders, crossheads, tips, dies and other extrusion accessories. The company was founded in 1998 and has experience providing equipment and tools to industries such as wire and cable, pipe, medical tubing. Sai Extrumech offers a wide range of standardized and customizable extrusion equipment including laboratory and production scale extrusion lines, single and twin screw extruders, fixed and mobile crossheads, and precision extrusion tips and dies.
GRA400 Jingdiao High Speed Machining Center
The document describes a GRA400 5-axis high-speed machining center capable of precision machining of dies, molds, and complex hardware parts. It has fully closed-loop control for 5-axis machining and can achieve machining effects of 0.1 μm feed, 1 μm cutting, and nanoscale roughness stability. It also has a strong load capacity direct drive double axis rotary table with high machining accuracy.
Emag News 21 English
The document discusses several automated machining centers from EMAG for precision metal components:
1. The VL 2 vertical turning machine requires little floor space but has high productivity due to full automation and high quality components.
2. The VLC 100 G grinder is compact at just 5.7 square meters and has integrated automation, allowing for very short cycle times in machining small metal parts.
3. The VLC 500 MT is a multi-technology center that can perform turning, drilling, milling and more in a single clamping for large workpieces like those used in wind turbines. It ensures efficient, high-speed machining of large components.
JPMA Mill Coupling Presentation
JPMA, Mill Coupling used in Suigar Industry.
Mill coupling is installed for torque transmission from the final speed reduction gear/ Planetary Gear to the mill top roller.
In spite of the numerous shortcomings of the tail bar system, it was universally used simply because there was no better alternative before the introduction of Rope coupling / JPMA Mill Coupling.
JPMA Mill coupling completely replaces the conventional tail bar and square coupling assembly.
Dyadics_ scll6_ Spec Sheet
The document introduces several mechatronics cylinder models from Dyadic Systems that are available starting at US$295. Key features highlighted include integrated motors, encoders, and drives for accuracy and long life. Models include low-cost, standard, and dust-proof options with various thrust capacities. Specification tables provide additional details on each model such as stroke length, speed, load capacity, and dimensions.
Jingdiao GRA100 - 5 axis High Speed Mill
This document provides information about the GRA100 5-axis high-speed machining center from Jingdiao. It is designed for precision machining of small parts and molds. The machining center has fully closed-loop control for high accuracy and thermal stability. It also has features for convenient recycling of precious metal debris. The document includes specifications, examples of parts machined, and descriptions of its components like the spindle, rotary table, tool magazines, and optional material handling system.
2015 SMEC Machinery Products Catalogues
This document provides information about SMEC Co., Ltd., a Korean manufacturer of machine tools, semiconductor equipment, and robots.
It summarizes the company's history since 1988 when it started as a machine tool division of Samsung Heavy Industries. It then lists the company's certifications and details of exporting manufacturing technology to various global regions.
The document includes specifications for several of SMEC's CNC turning center models, along with images and descriptions of their features and capabilities. It promotes SMEC's focus on reliable partnerships and supplying parts/equipment to major companies in industries like automotive, aerospace, and semiconductors.
Takam Full Cat
This document provides specifications for various CNC machine models produced by Takam Machinery Co. It includes technical parameters such as travel dimensions, worktable size, spindle specifications, and speeds for over 20 vertical and horizontal machining center models. The document establishes Takam as a global producer of high-end CNC machines with production bases in the US, Taiwan, and China. It aims to meet customer demands for high-quality, high-tech CNC machines.
D65 e p-12_hess143108
This document provides specifications for the Komatsu D65E-12 and D65P-12 crawler dozers. It lists the flywheel horsepower, operating weight, blade capacity, and other key specifications. It also describes features like the gull-wing engine doors, joystick controls, electronic monitoring system, and hexagonal pressurized cab. The document provides information on the engine, transmission, undercarriage, and other components to highlight the machines' power, reliability and maintenance features.
Electrical screw press.pptx
Electric Screw Press and Expert Consultancy Services
Are you looking to enhance your forging process to achieve higher efficiency, precision, and overall quality? Look no further. At Adhvika Forge Tech Pvt. Ltd., we offer cutting-edge electric screw press technology coupled with comprehensive forging consultancy services to optimize your operations and elevate your production capabilities.
Biến tần ls và cá ứng dụng trong sản xuất
Biến tần ls và cá ứng dụng trong sản xuấtCông ty TNHH Kỹ Thuật Tự Động HƯNG PHÚ - HƯNG PHÚ Automation
Phân loại biến tần LS
A. Phân loại biến tần LS theo nhóm tên của nhà sản xuất
• Biến tần LS dòng IV5
• Biến tần LS dòng IS7
• Biến tần LS dòng IS5
• Biến tần LS dòng IP5A
• Biến tần LS dòng IG5A
• Biến tần LS dòng IC5A
• Biến tần LS dòng IE5A
B. Phân loại biến tần LS theo nguồn điện cung cấp
• Biến tần 1 pha 220V
• Biến tần 3 pha 220V
• Biến tần 3 pha 380V
C. Phân lọai biến tần LS theo công suất
• Biến tần LS có nhiều loại công suất khác nhau từ 0.1 KW dến 800KW hoặc là từ 1/8HP dến 1250HP
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
INDIA'S Finest Range of CNC Machines Manufacturer
LMW is the most trusted brand among CNC Machine Manufacturers in India. We are the pioneers and serving the customer's need is in the core value of the company.
To diversify operations, LMW collaborated with Japan’s Mori Seiki Co. Ltd to establish the Machine Tool Division in 1988, which is the first of its kind plant in India manufactures CNC Turning Centres, Machining Centres and Turnmill Centres. Till date, LMW MTD has supplied more than 14,000 CNC Turning Centres and machining centres to a wide customer base spans automobile industry, auto ancillaries, and general engineering industries. In addition to several technology partnerships to upgrade its offerings, LMW MTD has developed its indigenous research capabilities with pride and dedication.
In 1995, LMW joined hands with Mikron, Switzerland for manufacture of CNC Universal Boring and Milling machines for Tool Room. In addition to selling the machines in domestic market LMW had buy back arrangement with Mikron.
In the hugely segmented Indian market for CNC machines where a large number of old and new companies vie for a market share, LMW occupies a special place in the country because of its highest quality, longevity, easiest-to-use machines range, best value for money, and world class customer support. LMW MTD’s dedicated and experienced service team has set enviable track records in attending to customers through both on-site and remote means.
Ogura Industrial Products
Ogura Industrial Corp. is a leading manufacturer of electromagnetic clutches and brakes, founded in 1938 in Somerset, New Jersey. They have 14 manufacturing plants worldwide and conform to various quality standards. The document provides contact information for Ogura and an overview of their product catalog featuring over 3,000 electromagnetic clutch and brake designs across various models.
EMCO Milling - Turning Machines
VMC Tech represents the EMCO turning - milling machines in Indiana and Michigan. The EMCO Group is one of Europe’s leading manufacturers of turning and milling centers.
Turn & mill centers are essentially CNC lathes that perform multiple machining operations. They can be either based on horizontal or vertical lathe, with spindles for milling and drilling and turning. With these all these cutting applications, a part requiring a variety of operations can be set up on only one machine.
Shimpo circulute 3000_catalog
This document provides information on Shimpo Speed Reducers. It includes:
- An overview of the cycloidal gearing design which provides high efficiency, shock load capacity, and low inertia.
- Details on mounting options, inputs, precision vs standard backlash models.
- Examples of applications and configurations.
- Selection guidelines for industrial and servo motor applications based on load, service factors, and torque calculations.
- Dimensional drawings, specifications tables, and engineering details.
PMSM.pdf
This document is a catalog for JDPM permanent magnet synchronous motors. It provides information over 16 pages on the technical specifications, features, advantages, and applications of JDPM's line of permanent magnet synchronous motors. The motors are highly efficient, with efficiencies as high as IE4 and IE5 levels. They provide benefits like reduced energy costs, lower emissions, and cost savings compared to induction motors. The catalog includes details on motor sizes, voltages, speeds, currents, torques, and efficiency curves. It also describes common applications in areas like industrial machinery and factory automation.
Similar to Datasheet.hk m35sp 9-4813634 (20)
Leading Mini Crawler Crane Hire Service Provider: Call Today
Leading Mini Crawler Crane Hire Service Provider: Call Today
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Recently uploaded
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Descripción del cargador frontal VOLVO l180E
按照学校原版(UTS文凭证书)悉尼科技大学毕业证快速办理
了解办理留学学历【微信:176555708】【(UTS毕业证书)悉尼科技大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood touchscreen Bluetooth stereo head unit manual
car rentals in nassau bahamas | atv rental nassau bahamas
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
欧洲杯下注-欧洲杯下注下注app-欧洲杯下注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。欧洲杯下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，欧洲杯下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】世预赛下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。世预赛下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，世预赛下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
The last lesson in comic form for English art integrated project class 12
English art integrated project class 12 for Ch 1 The Last lesson
欧洲杯竞猜-欧洲杯竞猜外围竞猜-欧洲杯竞猜竞猜平台|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯竞猜是世界上历史最悠久的博彩公司之一。其历史可以追溯到十九世纪末，确切时间是1886年。这家英国公司拥有超过15000名员工，是博彩行业规模最大的公司。欧洲杯竞猜是英国最受欢迎的实体博彩公司之一，其排名仅次于欧洲杯竞猜，旗下2800家投注站遍布全英国。
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定制【微信:bwp0011】《(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
咨询办理【(UniSA毕业证书)南澳大学毕业证】【176555708微信号】未毕业成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
学校原件一模一样【微信：741003700 】《(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
一比一原版悉尼大学毕业证(USYD毕业证书)学历如何办理
精仿办理【微信号:176555708】【精仿办理(USYD毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
退学办理【微信号:176555708】【退学办理(Curtin毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Dahua Security Camera System Guide esetia
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Recently uploaded (20)
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
car rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamas
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
The last lesson in comic form for English art integrated project class 12
The last lesson in comic form for English art integrated project class 12
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Datasheet.hk m35sp 9-4813634
- 1. www.DataSheet4U.com MITSUMI Stepping Motors M35SP-9, -10N OUTLINE "M35SP-9" with 7.5˚ and "M35SP-10N" with 3.75˚ of step angle which belongs to the 35mm outer diameter model series. Output torque characteristics-holding torque : 51.9mN·m, pull-out torque : 35.8mN·m/200pps, and pull-in torque : 35.3mN·m/200pps (12V DC). With these torques this motor materializes an excellent size performance. Stepping Motors FEATURES 1. Compact size and high output torque. 2. Superior running quietness and stability. 3. Step angle: 7.5˚ (M35SP-9) 3.75˚ (M35SP-10N). 4. Excellent responsiveness acquired. USES Printers, multifunction machines, copy machines, FAX, and such.
- 2. MITSUMI SPECIFICATIONS Stepping Motors CHARACTERISTICS M35SP-9 (50Ω, 24V DC) Pull-out Torque Pull-inTorque 0 4.90 9.80 14.70 19.60 24.50 29.40 34.30 39.20 44.10 49.00 100 200 300 400 500 600 700 800 900 10000 Pulse Rate (pps) Torque(mN·m) M35SP-10N (50Ω, 24V DC) Pull-out Torque Pull-inTorque 0 4.90 9.80 14.70 19.60 24.50 100 200 300 400 500 600 700 800 900 10000 Pulse Rate (pps) Torque(mN·m) DIMENSIONS Unit : mm, General tolerance : ±0.5 Items M35SP-9 M35SP-10N Rated Voltage DC 24V Working Voltage DC 21.6~26.4V Rated Current / Phase 517mA max. No. of Phase 4 Phase Coil DC Resistance 50Ω/phase±7% Step Angle 7.5˚/step 3.75˚/step Excitation Method 2-2 Phase excitation (Unipolar driving) Insulation Class Class E insulation Holding Torque 51.9mN·m 26.5mN·m Pull-out Torque 35.8mN·m/200pps 13.7mN·m/400pps Pull-in Torque 35.3mN·m/200pps 13.2mN·m/400pps Max. Pull-out Pulse Rate 970pps 880pps Max. Pull-in Pulse Rate 740pps 770pps