Datasheet M48112-S(Battery)
โข
0 likesโข202 views
This document provides specifications for the Alpha ESS M48112-S modular battery. It has a usable capacity of 5.2 kWh from 5.7 kWh nominal capacity. Key features include modular and plug-and-play design, over 6000 cycle life, and 10 year performance warranty. The battery dimensions are 450x580x165mm and it has communication interfaces, BMS monitoring, and works from -10ยฐC to 50ยฐC.
Report
Share
Report
Share
Download to read offline
Recommended
OV7670 Camera interfacing-with-arduino-microcontroller
This document discusses interfacing an OV7670 camera module with an Arduino microcontroller. It begins with an introduction and objectives. It then describes the hardware used, including specifications of the camera module and Arduino. It provides circuit diagrams and explains the serial camera control bus protocol. The document outlines the program flow, including initializing the camera, receiving image bytes in rows, and converting the pixel data to an image file. It also discusses handling multiple scans and converting images to PDF. Finally, it concludes the camera can provide a low-cost, configurable image acquisition solution for applications like security and time-lapse photography.
ELECTRICAL PROJECT LIST FOR DIPLOMA STUDENTS-DEEE/DECE
The document lists 142 potential diploma project titles related to various technologies including embedded systems, PLCs, wireless communication, RFID, biometrics, robotics, renewable energy, and more. Many involve designing systems for healthcare applications like remote patient monitoring, hospital automation, and assistive devices for the disabled. Others relate to industrial automation, home automation, security, agriculture, and power systems. MAAS TECH provides support and consultation for students to complete these types of projects.
Heart attack and alcohol detection sensor using internet of things
โIn this system we tend to implement a heart-beat observation and heart failure detection system victimization
using the Internet of things. Recently we have got enlarged range of heart diseases as well as enlarged risk of heart
attacks. The detector is then interfaced to a microcontroller that enables checking pulse rate readings and transmittal
them over web. The user might set the high likewise as low levels of heart beat limit. Once setting these limits, the system
starts observation as shortly as patient heart beat goes on top of an explicit limit, the system sends response to the
controller that then transmits this over the net and alerts the doctors likewise as involved. This technique is employed to
watch heartbeat rate of the motive force perpetually and prevents from the accidents by dominant through IOT. IOT
conveys the emergency message to the Owner, auto and therefore the Police. Arduino processor ATmega328 is ready to
handle a lot of functions than standard microcontrollers. This technique is intended for the protection of individuals
sitting within the vehicle.
VHDL coding in Xilinx
Basic steps to write a VHDL code in Xilinx ISE environment. Step-by-step picture is also shown to get the clear view of the process.
digital clock atmega16
This document describes an embedded systems project involving an Atmega16 microcontroller to create a stopwatch. It includes sections on the microcontroller, analog to digital conversion, timers, interfacing with an LCD display, and the stopwatch program code. The program uses buttons on ports A and D to start, stop, reset, and increment the stopwatch which displays hours, minutes, seconds, and tenths of seconds on the LCD. The document provides explanations of the microcontroller features and registers used in the project.
Microcontroller based automatic engine locking system for drunken drivers
This document describes a mini project report on a microcontroller-based automatic engine locking system for drunken drivers. The system uses an AT89S52 microcontroller and various hardware components like an alcohol detection sensor, buzzer, LCD display, motors/engine, and other supporting circuitry. If the alcohol detection sensor detects alcohol levels above a set limit from the driver's breath, the microcontroller will lock the engine by activating a relay to prevent drunken driving and accidents. The project aims to increase road safety by preventing intoxicated individuals from operating vehicles.
IRJET - Speed Control of DC Motor by using IoT
This document describes a system to control the speed of a DC motor using IoT (Internet of Things). The system uses an Arduino microcontroller, WiFi module, temperature sensor, IR sensor, and relay to monitor and control the motor remotely. It protects the motor from overcurrent and overheating. The system allows observing parameters like temperature, current, and voltage of the motor. Commands sent from a website through the WiFi module control the motor speed and direction. The system provides a way to remotely protect, monitor, and control a DC motor using IoT technology.
WORKER SAFETY HELMET and MINING TRACKING
This document describes a proposed worker safety helmet and mining tracking system using IoT technologies. The system would monitor workers in mines for hazardous conditions like high temperature, humidity, and gas levels. Workers would be equipped with helmets containing sensors and a panic button. If a hazardous situation occurs, the worker can press the panic button to alert monitors. The system aims to improve worker safety in mines by remotely tracking workers and alerting to dangers. It compares existing GPS, GSM, and RFID tracking methods to the proposed IoT-based approach using sensors in helmets linked to off-site monitors. The goal is to address past mining disasters caused by a lack of environmental monitoring and worker tracking inside mines.
Recommended
OV7670 Camera interfacing-with-arduino-microcontroller
This document discusses interfacing an OV7670 camera module with an Arduino microcontroller. It begins with an introduction and objectives. It then describes the hardware used, including specifications of the camera module and Arduino. It provides circuit diagrams and explains the serial camera control bus protocol. The document outlines the program flow, including initializing the camera, receiving image bytes in rows, and converting the pixel data to an image file. It also discusses handling multiple scans and converting images to PDF. Finally, it concludes the camera can provide a low-cost, configurable image acquisition solution for applications like security and time-lapse photography.
ELECTRICAL PROJECT LIST FOR DIPLOMA STUDENTS-DEEE/DECE
The document lists 142 potential diploma project titles related to various technologies including embedded systems, PLCs, wireless communication, RFID, biometrics, robotics, renewable energy, and more. Many involve designing systems for healthcare applications like remote patient monitoring, hospital automation, and assistive devices for the disabled. Others relate to industrial automation, home automation, security, agriculture, and power systems. MAAS TECH provides support and consultation for students to complete these types of projects.
Heart attack and alcohol detection sensor using internet of things
โIn this system we tend to implement a heart-beat observation and heart failure detection system victimization
using the Internet of things. Recently we have got enlarged range of heart diseases as well as enlarged risk of heart
attacks. The detector is then interfaced to a microcontroller that enables checking pulse rate readings and transmittal
them over web. The user might set the high likewise as low levels of heart beat limit. Once setting these limits, the system
starts observation as shortly as patient heart beat goes on top of an explicit limit, the system sends response to the
controller that then transmits this over the net and alerts the doctors likewise as involved. This technique is employed to
watch heartbeat rate of the motive force perpetually and prevents from the accidents by dominant through IOT. IOT
conveys the emergency message to the Owner, auto and therefore the Police. Arduino processor ATmega328 is ready to
handle a lot of functions than standard microcontrollers. This technique is intended for the protection of individuals
sitting within the vehicle.
VHDL coding in Xilinx
Basic steps to write a VHDL code in Xilinx ISE environment. Step-by-step picture is also shown to get the clear view of the process.
digital clock atmega16
This document describes an embedded systems project involving an Atmega16 microcontroller to create a stopwatch. It includes sections on the microcontroller, analog to digital conversion, timers, interfacing with an LCD display, and the stopwatch program code. The program uses buttons on ports A and D to start, stop, reset, and increment the stopwatch which displays hours, minutes, seconds, and tenths of seconds on the LCD. The document provides explanations of the microcontroller features and registers used in the project.
Microcontroller based automatic engine locking system for drunken drivers
This document describes a mini project report on a microcontroller-based automatic engine locking system for drunken drivers. The system uses an AT89S52 microcontroller and various hardware components like an alcohol detection sensor, buzzer, LCD display, motors/engine, and other supporting circuitry. If the alcohol detection sensor detects alcohol levels above a set limit from the driver's breath, the microcontroller will lock the engine by activating a relay to prevent drunken driving and accidents. The project aims to increase road safety by preventing intoxicated individuals from operating vehicles.
IRJET - Speed Control of DC Motor by using IoT
This document describes a system to control the speed of a DC motor using IoT (Internet of Things). The system uses an Arduino microcontroller, WiFi module, temperature sensor, IR sensor, and relay to monitor and control the motor remotely. It protects the motor from overcurrent and overheating. The system allows observing parameters like temperature, current, and voltage of the motor. Commands sent from a website through the WiFi module control the motor speed and direction. The system provides a way to remotely protect, monitor, and control a DC motor using IoT technology.
WORKER SAFETY HELMET and MINING TRACKING
This document describes a proposed worker safety helmet and mining tracking system using IoT technologies. The system would monitor workers in mines for hazardous conditions like high temperature, humidity, and gas levels. Workers would be equipped with helmets containing sensors and a panic button. If a hazardous situation occurs, the worker can press the panic button to alert monitors. The system aims to improve worker safety in mines by remotely tracking workers and alerting to dangers. It compares existing GPS, GSM, and RFID tracking methods to the proposed IoT-based approach using sensors in helmets linked to off-site monitors. The goal is to address past mining disasters caused by a lack of environmental monitoring and worker tracking inside mines.
Project report on wireless based traffic control for emergency vehicle
This document presents a preliminary project report on a proposed wireless traffic control system for emergency vehicles. The system would use radio frequency (RF) transmission to automatically control traffic lights and give priority to emergency vehicles. It discusses the need for such a system due to increasing traffic and delays for emergency vehicles. It then outlines the basic technology of RF transmitters and receivers that would be used and provides a basic design of the system including encoders, decoders, microcontrollers and the traffic light sequences. The goal is for emergency vehicles to bypass traffic with minimal disruption to regular traffic flow.
Automatic railway gate control using microcontroller
This document describes an automatic railway gate control system using a microcontroller. The main components are IR sensors to detect trains, a microcontroller to control the system logic, and DC motors to open and close the gate. When a train is detected by the IR sensors, the microcontroller signals the motors to close the gate. Once the train has passed, the gate is reopened. The system aims to prevent accidents at unmanned railway crossings by automatically operating the gate based on train detection. It provides safety without requiring a gatekeeper and works using a simple design with low cost components.
Project report for railway security monotorin system
The document discusses railway safety and proposes a railway security monitoring system using vibration sensors and ZigBee technology. It begins with background on railway accidents and the need to improve safety. The existing signaling system relies on human communication, leading to errors. The proposed system uses vibration sensors on trains to detect collisions or derailment. It uses ZigBee for two-way communication between trains and control centers to automatically control railway gates and avert accidents in real-time. The system is expected to improve safety at a low cost without replacing existing infrastructure.
Gps inerface in gsm network
The document discusses a system that uses GPS and GSM technologies to track vehicles and other assets. GPS satellites provide location data that is transmitted via GSM networks. This allows asset owners to monitor locations in real-time through a web application. The system provides security benefits like recovering stolen vehicles and monitoring high-value goods. It could also optimize delivery routes and track animals. Combined GPS and GSM technologies enable low-cost, real-time asset monitoring with potential applications in transportation, security, and logistics.
"Terrorism Modeling & Risk Management" - Presented at the RAA's Cat Modeling ...
RMS spoke at the RAA's catastrophe modeling conference in Orlando recently, discussing terrorism risk and how the corresponding modeling solutions have evolved since 9/11.
Safe driving with alcohol detection ppt
here we present a smart helmet which ensures that the rider wears it and doesn't drive the vehicle after consuming alcohol
Advanced vehicle security system using fingerprint & gsm new
This document describes an advanced vehicle security system that uses fingerprint and GSM module for authentication. The system aims to provide a more secure and reliable authentication method compared to existing technologies. It consists of a fingerprint sensor module, GSM modem, microcontroller, relay driver, LCD display, and vibration sensor. The fingerprint module scans and identifies fingerprints, while the GSM modem enables remote authentication via SMS. If authentication succeeds, the relay driver will start the vehicle. This provides a low-cost security system with advantages like reliability, security, and ease of use. Potential applications include securing cars, motorcycles, and other vehicles or devices.
Performance and Analysis of OFDM Signal Using Matlab Simulink
Multi-carrier modulation is an attractive technique for fourth generation .OFDM is based on
multicarrier modulation technique. In OFDM system the bit stream is divided into many different sub
channels. An efficient and distortionless scheme for peak power reduction in OFDM is proposed. In this
paper, a set of mapping where the actual transmit signal is selected. From this set of signal reduced
PAPR. Simulation results are shown. The lowest PAPR is compared with conventional work. It is also
compared BER to SNR and best result is achieved.
Stepper motor-interfacing
This document discusses interfacing and controlling a stepper motor using microcontrollers like the 8085 and 8051. It describes the basic structure of a stepper motor and explains that it rotates in fixed steps in response to electrical pulses. An interface is needed because stepper motors require more current than microcontrollers can provide. The document proposes using a ULN2003 motor driver IC to interface the stepper motor safely. It provides example assembly language code to send the necessary hexadecimal codes to rotate the stepper motor clockwise or counterclockwise using ports on the 8051 and 8255 I/O chips connected to an 8085 microcontroller.
Industrial monitoring and control system using android application
Automation takes the complete control of total plants few authentication and manual actions are needed from user side for completing action .Hence there is a must situation for users presence at all times in the control for taking some timely needed control actions. The proposed system provides a good solution to this problem. The whole control room environment is additionally implemented in the arm-android platform and the same is communicated to the process through Bluetooth. Now the user in control can use mobile at anytime, anywhere to monitor and control the whole plant.8051 is used here for acquiring process control parameters from the sensors like temperature, gas etc and transmitting it via a Bluetooth module to an android device. Hence the parameter values can be monitored and stored simultaneously.
AAI NSCBI Electrical Vocational Training Report
The document provides an overview of the power system at the Airport Authority of India's Netaji Subhas Chandra Bose International Airport. It describes the gas insulated switchgear unit that receives two incoming 33kV feeders. This supplies three 8MVA transformers that step down the voltage to 6kV. The 6kV is distributed to various load centers through underground cables. Automatic power factor correction panels are installed to improve the power factor. The transformers have nitrogen injection-based fire protection systems. Various safety measures like gravel beds and earth switches are implemented to protect personnel during maintenance work.
Traffic light control
This document describes a traffic light control system using a PIC 16F877A microcontroller. The system uses the microcontroller to control the lights in a cyclic rotation, with the red light on for 35 seconds, yellow for 15 seconds, and green for 5 seconds. It then repeats the cycle. The microcontroller is connected to traffic lights, a 7-segment display to show the time remaining, and runs a program to control the light rotations and display countdown. There is potential to enhance the system using sensors to automatically control lights based on traffic density.
GPS based tracking system
The document discusses interfacing a GPS modem with an Arduino Uno board to display location information on a 2x16 LCD. The GPS modem receives satellite signals, decodes them, and sends data like latitude and longitude in string format using the NMEA standard over serial. The Arduino program filters the NMEA data received and displays the location on the LCD.
OPAL-RT RT14 Conference: egston compiso opal-rt
The workshop covered a demonstration of power hardware-in-the-loop (PHIL) simulation using EGSTON's COMPISO inverter system and OPAL-RT's OP4500 real-time simulator. The demonstration showed a COMPISO inverter supplying power to a simulated residential electrical grid in real-time. Measurements from the real COMPISO hardware were fed back into the OP4500 simulator using the ORION optic fiber communication protocol. The workshop discussed the PHIL system configuration, stability considerations, and benefits of the partnership between EGSTON and OPAL-RT for real-time power hardware testing applications.
PIC Microcontroller | ADC Interfacing
Analog to Digital Converter (ADC) is a device that converts an analog quantity (continuous voltage) to discrete digital values.
The PIC microcontroller can be used in various electronic devices like alarm systems, electronic gadgets and computer control systems.
Major Project Synopsis Report on IoT based DC Motor Through a Web-site
This document presents a literature survey and planning for a major project to control the speed of a universal motor through IoT. The project was submitted by students Ritesh Solanki and Utkarsh Chaubey to Rajiv Gandhi Proudyogiki Vishwavidyalaya to fulfill their Bachelor of Engineering degree requirements. The project proposes monitoring and controlling an industrial universal motor remotely using sensors, a microcontroller, WiFi, and a web or mobile interface to allow for predictive maintenance and reduce downtime. It discusses the hardware, software, and communication components that will be used and provides block diagrams of the proposed system design and workflow.
Remote sensing and control of an irrigation system using a distributed wirele...
This document describes the design of a remote irrigation system using a wireless sensor network. Sensors will monitor field conditions like voltage, current, temperature and irradiance. The sensor data will be transmitted periodically to a base station. A digital controller will regulate the power point using a DC-DC converter to identify the maximum power point based on a neural network model. A low-cost RF module wireless network will transmit communication data for remote monitoring and distributed control. Web-based software will provide remote access to field conditions and real-time control of power points in the smart photovoltaic system. The system uses a PIC microcontroller and sensors to monitor the field and an RF transmitter to send data to the receiver and base station
EDLC-EMBEDDED PRODUCT DEVELOPMENT LIFE CYCLE
Embedded Product Development Life Cycle (Let us call it as EDLC, though it is not a standard and universal term) is an 'Analysis -Design -Implementation' based standard problem solving approach for Embedded Product Development. In any product development application, the first and foremost step is to figure out what product needs to be developed (analysis), next you need to figure out a good approach for building it (design) and last but not least you need to develop it (implementation).
ARDUINO BASED HEART BEAT MONITORING SYSTEM
Technological innovations in the field of disease prevention and maintenance of patient health have enabled the evolution of fields such as monitoring systems. Heart rate is a very vital health parameter that is directly related to the soundness of the human cardiovascular system. Heart rate is the number of times the heart beats per minute, reflects different physiological conditions such as biological workload, stress at work and concentration on tasks, drowsiness and the active state of the autonomic nervous system. It can be measured either by the ECG waveform or by sensing the pulse - the rhythmic expansion and contraction of an artery as blood is forced through it by the regular contractions of the heart. The pulse can be felt from those areas where the artery is close to the skin. This paper describes a technique of measuring the heart rate through a fingertip and Arduino. It is based on the principal of photophelthysmography (PPG) which is non-invasive method of measuring the variation in blood volume in tissue using a light source and detector. While the heart is beating, it is actually pumping blood throughout the body, and that makes the blood volume inside the finger artery to change too. This fluctuation of blood can be detected through an optical sensing mechanism placed around the fingertip. The signal can be amplified and is sent to Arduino with the help of serial port communication. With the help of processing software heart rate monitoring and counting is performed. The sensor unit consists of an infrared light-emitting-diode (IR LED) and a photo diode. The IR LED transmits an infrared light into the fingertip, a part of which is reflected back from the blood inside the finger arteries. The photo diode senses the portion of the light that is reflected back. The intensity of reflected light depends upon the blood volume inside the fingertip. So, every time the heart beats the amount of reflected infrared light changes, which can be detected by the photo diode. With a high gain amplifier, this little alteration in the amplitude of the reflected light can be converted into a pulse.
IRJET - Real Time Street Light using Raspberry Pi
This document describes a real-time street light system using a Raspberry Pi that aims to reduce power consumption. An infrared sensor detects vehicles, animals or people within 100 meters of a street light and a light dependent resistor sensor detects darkness. The street light will only turn on when both sensors provide a positive response. This prevents wastage by not illuminating when no movement is detected. The system uses solar power from photovoltaic cells charged by a battery and controller to automatically turn the solar LED street lights on at dusk and off at dawn daily.
Datasheet M4856-S(Battery)
The document provides specifications for the Alpha ESS M4856-S modular battery. It has a usable capacity of 2.6 kWh, nominal voltage of 51.2V, and depth of discharge of 90%. The battery modules can be connected in series and are available in energy capacities ranging from 2.9 to 23 kWh. It has an operating temperature range of -10 to 50 degrees Celsius and IP21 or IP65 protection rating depending on indoor or outdoor use.
Datasheet M38210-S(Battery)
The document describes an 8.1 kWh modular battery from Alpha ESS with the following key details:
- It has a usable capacity of 7.3 kWh, nominal voltage of 38.4V, and can discharge up to 90%.
- Each module is 332 x 570 x 223 mm and batteries can be connected in series of 6-20 for systems ranging from 48.6-162 kWh.
- Additional specs include an operating temperature range of -10ยฐC to 50ยฐC, IP20 protection, and a 3-year product warranty with 10-year performance warranty.
More Related Content
What's hot
Project report on wireless based traffic control for emergency vehicle
This document presents a preliminary project report on a proposed wireless traffic control system for emergency vehicles. The system would use radio frequency (RF) transmission to automatically control traffic lights and give priority to emergency vehicles. It discusses the need for such a system due to increasing traffic and delays for emergency vehicles. It then outlines the basic technology of RF transmitters and receivers that would be used and provides a basic design of the system including encoders, decoders, microcontrollers and the traffic light sequences. The goal is for emergency vehicles to bypass traffic with minimal disruption to regular traffic flow.
Automatic railway gate control using microcontroller
This document describes an automatic railway gate control system using a microcontroller. The main components are IR sensors to detect trains, a microcontroller to control the system logic, and DC motors to open and close the gate. When a train is detected by the IR sensors, the microcontroller signals the motors to close the gate. Once the train has passed, the gate is reopened. The system aims to prevent accidents at unmanned railway crossings by automatically operating the gate based on train detection. It provides safety without requiring a gatekeeper and works using a simple design with low cost components.
Project report for railway security monotorin system
The document discusses railway safety and proposes a railway security monitoring system using vibration sensors and ZigBee technology. It begins with background on railway accidents and the need to improve safety. The existing signaling system relies on human communication, leading to errors. The proposed system uses vibration sensors on trains to detect collisions or derailment. It uses ZigBee for two-way communication between trains and control centers to automatically control railway gates and avert accidents in real-time. The system is expected to improve safety at a low cost without replacing existing infrastructure.
Gps inerface in gsm network
The document discusses a system that uses GPS and GSM technologies to track vehicles and other assets. GPS satellites provide location data that is transmitted via GSM networks. This allows asset owners to monitor locations in real-time through a web application. The system provides security benefits like recovering stolen vehicles and monitoring high-value goods. It could also optimize delivery routes and track animals. Combined GPS and GSM technologies enable low-cost, real-time asset monitoring with potential applications in transportation, security, and logistics.
"Terrorism Modeling & Risk Management" - Presented at the RAA's Cat Modeling ...
RMS spoke at the RAA's catastrophe modeling conference in Orlando recently, discussing terrorism risk and how the corresponding modeling solutions have evolved since 9/11.
Safe driving with alcohol detection ppt
here we present a smart helmet which ensures that the rider wears it and doesn't drive the vehicle after consuming alcohol
Advanced vehicle security system using fingerprint & gsm new
This document describes an advanced vehicle security system that uses fingerprint and GSM module for authentication. The system aims to provide a more secure and reliable authentication method compared to existing technologies. It consists of a fingerprint sensor module, GSM modem, microcontroller, relay driver, LCD display, and vibration sensor. The fingerprint module scans and identifies fingerprints, while the GSM modem enables remote authentication via SMS. If authentication succeeds, the relay driver will start the vehicle. This provides a low-cost security system with advantages like reliability, security, and ease of use. Potential applications include securing cars, motorcycles, and other vehicles or devices.
Performance and Analysis of OFDM Signal Using Matlab Simulink
Multi-carrier modulation is an attractive technique for fourth generation .OFDM is based on
multicarrier modulation technique. In OFDM system the bit stream is divided into many different sub
channels. An efficient and distortionless scheme for peak power reduction in OFDM is proposed. In this
paper, a set of mapping where the actual transmit signal is selected. From this set of signal reduced
PAPR. Simulation results are shown. The lowest PAPR is compared with conventional work. It is also
compared BER to SNR and best result is achieved.
Stepper motor-interfacing
This document discusses interfacing and controlling a stepper motor using microcontrollers like the 8085 and 8051. It describes the basic structure of a stepper motor and explains that it rotates in fixed steps in response to electrical pulses. An interface is needed because stepper motors require more current than microcontrollers can provide. The document proposes using a ULN2003 motor driver IC to interface the stepper motor safely. It provides example assembly language code to send the necessary hexadecimal codes to rotate the stepper motor clockwise or counterclockwise using ports on the 8051 and 8255 I/O chips connected to an 8085 microcontroller.
Industrial monitoring and control system using android application
Automation takes the complete control of total plants few authentication and manual actions are needed from user side for completing action .Hence there is a must situation for users presence at all times in the control for taking some timely needed control actions. The proposed system provides a good solution to this problem. The whole control room environment is additionally implemented in the arm-android platform and the same is communicated to the process through Bluetooth. Now the user in control can use mobile at anytime, anywhere to monitor and control the whole plant.8051 is used here for acquiring process control parameters from the sensors like temperature, gas etc and transmitting it via a Bluetooth module to an android device. Hence the parameter values can be monitored and stored simultaneously.
AAI NSCBI Electrical Vocational Training Report
The document provides an overview of the power system at the Airport Authority of India's Netaji Subhas Chandra Bose International Airport. It describes the gas insulated switchgear unit that receives two incoming 33kV feeders. This supplies three 8MVA transformers that step down the voltage to 6kV. The 6kV is distributed to various load centers through underground cables. Automatic power factor correction panels are installed to improve the power factor. The transformers have nitrogen injection-based fire protection systems. Various safety measures like gravel beds and earth switches are implemented to protect personnel during maintenance work.
Traffic light control
This document describes a traffic light control system using a PIC 16F877A microcontroller. The system uses the microcontroller to control the lights in a cyclic rotation, with the red light on for 35 seconds, yellow for 15 seconds, and green for 5 seconds. It then repeats the cycle. The microcontroller is connected to traffic lights, a 7-segment display to show the time remaining, and runs a program to control the light rotations and display countdown. There is potential to enhance the system using sensors to automatically control lights based on traffic density.
GPS based tracking system
The document discusses interfacing a GPS modem with an Arduino Uno board to display location information on a 2x16 LCD. The GPS modem receives satellite signals, decodes them, and sends data like latitude and longitude in string format using the NMEA standard over serial. The Arduino program filters the NMEA data received and displays the location on the LCD.
OPAL-RT RT14 Conference: egston compiso opal-rt
The workshop covered a demonstration of power hardware-in-the-loop (PHIL) simulation using EGSTON's COMPISO inverter system and OPAL-RT's OP4500 real-time simulator. The demonstration showed a COMPISO inverter supplying power to a simulated residential electrical grid in real-time. Measurements from the real COMPISO hardware were fed back into the OP4500 simulator using the ORION optic fiber communication protocol. The workshop discussed the PHIL system configuration, stability considerations, and benefits of the partnership between EGSTON and OPAL-RT for real-time power hardware testing applications.
PIC Microcontroller | ADC Interfacing
Analog to Digital Converter (ADC) is a device that converts an analog quantity (continuous voltage) to discrete digital values.
The PIC microcontroller can be used in various electronic devices like alarm systems, electronic gadgets and computer control systems.
Major Project Synopsis Report on IoT based DC Motor Through a Web-site
This document presents a literature survey and planning for a major project to control the speed of a universal motor through IoT. The project was submitted by students Ritesh Solanki and Utkarsh Chaubey to Rajiv Gandhi Proudyogiki Vishwavidyalaya to fulfill their Bachelor of Engineering degree requirements. The project proposes monitoring and controlling an industrial universal motor remotely using sensors, a microcontroller, WiFi, and a web or mobile interface to allow for predictive maintenance and reduce downtime. It discusses the hardware, software, and communication components that will be used and provides block diagrams of the proposed system design and workflow.
Remote sensing and control of an irrigation system using a distributed wirele...
This document describes the design of a remote irrigation system using a wireless sensor network. Sensors will monitor field conditions like voltage, current, temperature and irradiance. The sensor data will be transmitted periodically to a base station. A digital controller will regulate the power point using a DC-DC converter to identify the maximum power point based on a neural network model. A low-cost RF module wireless network will transmit communication data for remote monitoring and distributed control. Web-based software will provide remote access to field conditions and real-time control of power points in the smart photovoltaic system. The system uses a PIC microcontroller and sensors to monitor the field and an RF transmitter to send data to the receiver and base station
EDLC-EMBEDDED PRODUCT DEVELOPMENT LIFE CYCLE
Embedded Product Development Life Cycle (Let us call it as EDLC, though it is not a standard and universal term) is an 'Analysis -Design -Implementation' based standard problem solving approach for Embedded Product Development. In any product development application, the first and foremost step is to figure out what product needs to be developed (analysis), next you need to figure out a good approach for building it (design) and last but not least you need to develop it (implementation).
ARDUINO BASED HEART BEAT MONITORING SYSTEM
Technological innovations in the field of disease prevention and maintenance of patient health have enabled the evolution of fields such as monitoring systems. Heart rate is a very vital health parameter that is directly related to the soundness of the human cardiovascular system. Heart rate is the number of times the heart beats per minute, reflects different physiological conditions such as biological workload, stress at work and concentration on tasks, drowsiness and the active state of the autonomic nervous system. It can be measured either by the ECG waveform or by sensing the pulse - the rhythmic expansion and contraction of an artery as blood is forced through it by the regular contractions of the heart. The pulse can be felt from those areas where the artery is close to the skin. This paper describes a technique of measuring the heart rate through a fingertip and Arduino. It is based on the principal of photophelthysmography (PPG) which is non-invasive method of measuring the variation in blood volume in tissue using a light source and detector. While the heart is beating, it is actually pumping blood throughout the body, and that makes the blood volume inside the finger artery to change too. This fluctuation of blood can be detected through an optical sensing mechanism placed around the fingertip. The signal can be amplified and is sent to Arduino with the help of serial port communication. With the help of processing software heart rate monitoring and counting is performed. The sensor unit consists of an infrared light-emitting-diode (IR LED) and a photo diode. The IR LED transmits an infrared light into the fingertip, a part of which is reflected back from the blood inside the finger arteries. The photo diode senses the portion of the light that is reflected back. The intensity of reflected light depends upon the blood volume inside the fingertip. So, every time the heart beats the amount of reflected infrared light changes, which can be detected by the photo diode. With a high gain amplifier, this little alteration in the amplitude of the reflected light can be converted into a pulse.
IRJET - Real Time Street Light using Raspberry Pi
This document describes a real-time street light system using a Raspberry Pi that aims to reduce power consumption. An infrared sensor detects vehicles, animals or people within 100 meters of a street light and a light dependent resistor sensor detects darkness. The street light will only turn on when both sensors provide a positive response. This prevents wastage by not illuminating when no movement is detected. The system uses solar power from photovoltaic cells charged by a battery and controller to automatically turn the solar LED street lights on at dusk and off at dawn daily.
What's hot (20)
Project report on wireless based traffic control for emergency vehicle
Project report on wireless based traffic control for emergency vehicle
ย
Automatic railway gate control using microcontroller
Automatic railway gate control using microcontroller
ย
Project report for railway security monotorin system
Project report for railway security monotorin system
ย
"Terrorism Modeling & Risk Management" - Presented at the RAA's Cat Modeling ...
"Terrorism Modeling & Risk Management" - Presented at the RAA's Cat Modeling ...
ย
Advanced vehicle security system using fingerprint & gsm new
Advanced vehicle security system using fingerprint & gsm new
ย
Performance and Analysis of OFDM Signal Using Matlab Simulink
Performance and Analysis of OFDM Signal Using Matlab Simulink
ย
Industrial monitoring and control system using android application
Industrial monitoring and control system using android application
ย
Major Project Synopsis Report on IoT based DC Motor Through a Web-site
Major Project Synopsis Report on IoT based DC Motor Through a Web-site
ย
Remote sensing and control of an irrigation system using a distributed wirele...
Remote sensing and control of an irrigation system using a distributed wirele...
ย
Similar to Datasheet M48112-S(Battery)
Datasheet M4856-S(Battery)
The document provides specifications for the Alpha ESS M4856-S modular battery. It has a usable capacity of 2.6 kWh, nominal voltage of 51.2V, and depth of discharge of 90%. The battery modules can be connected in series and are available in energy capacities ranging from 2.9 to 23 kWh. It has an operating temperature range of -10 to 50 degrees Celsius and IP21 or IP65 protection rating depending on indoor or outdoor use.
Datasheet M38210-S(Battery)
The document describes an 8.1 kWh modular battery from Alpha ESS with the following key details:
- It has a usable capacity of 7.3 kWh, nominal voltage of 38.4V, and can discharge up to 90%.
- Each module is 332 x 570 x 223 mm and batteries can be connected in series of 6-20 for systems ranging from 48.6-162 kWh.
- Additional specs include an operating temperature range of -10ยฐC to 50ยฐC, IP20 protection, and a 3-year product warranty with 10-year performance warranty.
Datasheet SMILE5-BAT(Battery)
The document provides specifications for the SMILE5-BAT battery from Alpha ESS. The battery has a 5.7 kWh energy capacity and 5.5 kWh usable capacity. It has a nominal voltage of 51.2V, operating voltage range of 48-57.6V, and internal resistance of less than 30 mOhms. The battery dimensions are 600x250x600mm and it has a 10,000 cycle lifespan.
Alpha ESS 10.1kWh Home Battery
This document provides specifications for the SMILE-BAT-10.1P modular home battery from Alpha ESS. The battery has a 10.1 kWh energy capacity and 9.1 kWh usable capacity. It uses LFP battery cells and has a nominal voltage of 48V, depth of discharge of 90%, and expected cycle life of 8000 cycles. Key features include modular and scalable design from 1-6 modules, CAN and RS-485 communication, IP21 or IP65 protection, and a 5-year product and 10-year performance warranty.
Datasheet M4856-P(Battery)
The document provides specifications for the M4856-P modular battery from Alpha ESS. It has a capacity of 2.9 kWh with a usable capacity of 2.8 kWh. It uses LFP battery cells and has a 10,000 cycle lifespan. The battery module has dimensions of 610 x 236 x 303 mm and weighs 42 kg. It has protections such as overcurrent, overvoltage, and overtemperature.
Datasheet SMILE5
The document describes the Storion-SMILE5 home energy storage system from Alpha ESS. It has a modular battery capacity ranging from 2.9 to 60.6 kWh that is expandable. The system provides backup power, fast response times, 24/7 monitoring and has an intelligent battery management system to maximize lifespan. Key specifications of the inverter, battery modules and system are also provided.
Growatt Hybrid Inverter
The Growatt SPH series of inverters are residential battery storage solutions that can connect PV, battery, and grid in one unit. They feature a compact design, user-friendly interface, flexible settings, reliable functions, and enhanced safety. The series includes models from 3000W to 6000W that are well suited for powering private households and come with a 5-year warranty.
Littelfuse solutions for uninterrupted power supply and energy storage systems
To help increase energy efficiency and reliability in data center, industrial, and renewable energy applications, Littelfuse offers a wide variety of solutions.
Solar Edge p320-p505
The document summarizes SolarEdge's Power Optimizer, which is designed to work with SolarEdge inverters. It allows for up to 25% more energy production compared to traditional solar systems. The Power Optimizer provides module-level voltage shutdown for safety and monitoring. It comes with a 25-year warranty and is compatible with all SolarEdge single and three phase inverters.
Omnik hyd-inverter-3k-tl2-en
The hybrid inverter provides automatic control of solar energy as self-consumption or power sold back to the grid. It allows for full solar energy storage in the battery and self-consumption from the battery. The inverter is suitable for complex installation environments and has anti-shading functions. It provides flexible monitoring of the system and has a 7 year standard warranty.
Omnik Hybrid Inverter 3k TL2
The hybrid inverter provides automatic control of solar energy as self-consumption or power sold back to the grid. It allows for full solar energy storage in the battery and self-consumption from the battery. The inverter is suitable for complex installation environments and has anti-shading functionality. It provides flexible monitoring of the system and has a 7 year standard warranty.
Alpha ESS Smile 5
The document describes the Storion-SMILE5, a 5kW home energy storage system from AlphaESS. It has a lithium iron phosphate battery with a capacity ranging from 5.7 to 34.4 kWh. Key features include self-sufficiency, modularity, intelligent controls, long lifespan, and essential load protection. The system can be monitored 24/7 via a web interface or mobile app. AlphaESS has over 10,000 systems installed globally and uses patented German technology.
Power u ps hip3300 -500 kva
This document describes Australia Power Ups' HIP3000 series of online UPS systems for power capacities ranging from 10-500kVA. The UPS systems provide clean backup power for critical applications and feature digital control, high efficiency up to 95%, redundant parallel capability, and versatile communication interfaces. They are suitable for telecom infrastructure, server rooms, industrial equipment, and other applications requiring uninterrupted power.
Omnik micro-inverter-m248-m500-kit
This document provides specifications for the Omniksol microinverters and microkit power interface. The M248 and M500 microinverters can each connect up to 15 solar modules, have maximum efficiencies of 95.5% and 96.5% respectively, and come with a 15-year warranty. The Microkit 4k provides over/under voltage and frequency protection at the grid connection point, monitors energy production from connected microinverters, and has dimensions of 207x186x81mm.
Sunwoda Energy Corporate brochure.pdf
๐๐ช๐ฃ๐ฌ๐ค๐๐ ๐๐ฃ๐๐ง๐๐ฎ ๐๐ง๐ค๐ช๐ฅ, listed in China & Swiss stock markets, Code [300207], with great bankability & business track records.
๐ณ๏ธโ๐ Asia battery Giant, Global Top 6 lithium-ion battery Suppliers
๐ณ๏ธโ๐ Offer wide range of solutions from Battery cells, Portable, Residential, C&I, and Utility battery storage systems in turnkey.
๐ณ๏ธโ๐ Establish in 1997, 26+ years focus on the energy market
๐ณ๏ธโ๐ 50,000+ global staff, 12 production bases with 300GWh yearly production capacity
๐ณ๏ธโ๐ Solid Partnership with main energy players
๐ณ๏ธโ๐ Ranked 32 in Global renewable energy enterprises, 2022
๐ณ๏ธโ๐ OEM/ODM support with in-house RD team
#๐๐๐๐ฉ ๐ฌ๐ ๐จ๐ช๐ฅ๐ฅ๐ก๐ฎ: Battery cells, Pack, Portable, Residential, C&I , Utility energy storage products & solutions.
# ๐ผ๐ฅ๐ฅ๐ก๐๐๐๐ฉ๐๐ค๐ฃ ๐๐๐๐ฃ๐๐ง๐๐ค๐จ: Suits for Generation, Distribution, Behind meter 20+ applications
# ๐ฝ๐ช๐จ๐๐ฃ๐๐จ๐จ ๐๐ค๐ฃ๐ฉ๐๐๐ฉ & ๐๐ง๐๐ ๐๐ฃ๐ฆ๐ช๐๐ง๐๐จ: jenniferzhong@sunwoda.com
Alpha Smile 5
The Storion-SMILE5 is a 5.7 kWh residential energy storage system from AlphaESS that features:
1) Modular lithium iron phosphate battery packs for safety and long lifespan.
2) Intelligent control and monitoring via a mobile app or web portal.
3) UPS functionality for backup power during outages.
10 omniksol-5k-6k-7k-8k-tl-en
This document provides specifications for Omniksol three-phase inverters ranging from 5kW to 8kW. The inverters use a transformerless three-level topology with dual MPPT inputs and have efficiencies up to 98.6%. They are suitable for indoor and outdoor use with an IP65 rating and include 5 years of standard warranty protection that can be extended up to 15 years. The inverters comply with various international safety standards.
Omnik inverter-5k-6k-7k-8k-tl
This document provides specifications for Omniksol three-phase inverters ranging from 5kW to 8kW. The inverters use a transformerless three-level topology with dual MPPT inputs and have efficiencies up to 98.6%. They are suitable for indoor and outdoor use with an IP65 rating and include 5 years of standard warranty protection that can be extended up to 15 years. The inverters comply with various international safety standards.
Bw4100-bw6200ce-bw6310ab-bw6610a-explosion-proof-headlight-wrestt
1. The document describes several portable explosion proof lights produced by Yueqing Iwiss Electric Co., including searchlights, headlights, and tracker lights.
2. The lights feature LED or halogen light sources, rechargeable batteries, and flameproof or intrinsically safe certification for use in hazardous environments like gas stations and mines.
3. They have adjustable heads, magnetic bases, strobe modes, and battery level indicators, and are intended for tasks like patrols, repairs, rescue, and lighting work areas.
Fronius Symo Hybrid 3.0-5.0 Package
The document describes the Fronius Energy Package, which includes the Fronius Symo Hybrid inverter and Fronius Solar Battery for home energy storage. The Symo Hybrid comes in models from 3.0-5.0 kW and allows excess solar energy to be stored in the Solar Battery for use when solar power is unavailable. The battery comes in sizes from 4.5-12 kWh and uses lithium iron phosphate technology. The package provides 24 hours of energy independence and emergency power for homes.
Similar to Datasheet M48112-S(Battery) (20)
Littelfuse solutions for uninterrupted power supply and energy storage systems
Littelfuse solutions for uninterrupted power supply and energy storage systems
ย
Bw4100-bw6200ce-bw6310ab-bw6610a-explosion-proof-headlight-wrestt
Bw4100-bw6200ce-bw6310ab-bw6610a-explosion-proof-headlight-wrestt
ย
More from AlphaESS
AlphaESS company presentation
This document provides an overview of AlphaESS, an energy storage solutions company. It discusses AlphaESS' company profile including its 8-year history, global presence in over 50 countries, key milestones, solutions, and certifications. It then describes AlphaESS' residential products ranging from 3-10kW and commercial/industrial solutions from 30kW-10MW+. Finally, it discusses AlphaESS' focus on solutions reliability including their selection of safe LFP battery cells, comprehensive battery management systems, intelligent energy management systems, and cloud monitoring platform. In summary, AlphaESS provides a full suite of smart energy storage solutions and services for residential, commercial, and utility-scale applications.
T50 T100 M48112-S
M48112-S for energy storage products T50/T100, suitable for commercial level energy storage need
T50/T100 M38201-S
batteries for T50 or T100 energy storage system, suitable for small to middle businesses
Smile5 in the house-4
How smile 5 make the interior decoration of your house look like? Here are some examples.
More from AlphaESS (20)
Recently uploaded
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, weโll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
Weโll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether youโre tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Letโs turn complexity into clarity and make your workspaces work wonders!
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. Weโll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, weโll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
โข Communication Mining Overview
โข Why is it important?
โข How can it help todayโs business and the benefits
โข Phases in Communication Mining
โข Demo on Platform overview
โข Q/A
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
ใฟใชใใใใใซใกใฏใใไฝๆๅญใพใงๅ
ฅใใฎ๏ผ40ๆๅญไปฅไธไธๅฏใจใๆฌๅฝใซๆๅณใใใใชใใใฉใใ้็ๆๅญๆฐๆธใใฆใชใใใใใธใงใใฐใๆๅญๆฐใใใใใใใชใใฎ๏ผใใ...
ใฟใชใใใใใซใกใฏใใไฝๆๅญใพใงๅ
ฅใใฎ๏ผ40ๆๅญไปฅไธไธๅฏใจใๆฌๅฝใซๆๅณใใใใชใใใฉใใ้็ๆๅญๆฐๆธใใฆใชใใใใใธใงใใฐใๆๅญๆฐใใใใใใใชใใฎ๏ผใใ...ๅๅ ใงใ็ท
ใใ3000ๅญใพใงใใๅ
ฅใใชใใใฉใฟใคใใซใฎๆนใใใใใๆๅญๅ
ฅใใจๆใใพใใย
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4jโs graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges โ from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Recently uploaded (20)
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
ย
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
ย
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
ย
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
ย
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
ย
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
ย
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
ย
ใฟใชใใใใใซใกใฏใใไฝๆๅญใพใงๅ
ฅใใฎ๏ผ40ๆๅญไปฅไธไธๅฏใจใๆฌๅฝใซๆๅณใใใใชใใใฉใใ้็ๆๅญๆฐๆธใใฆใชใใใใใธใงใใฐใๆๅญๆฐใใใใใใใชใใฎ๏ผใใ...
ใฟใชใใใใใซใกใฏใใไฝๆๅญใพใงๅ
ฅใใฎ๏ผ40ๆๅญไปฅไธไธๅฏใจใๆฌๅฝใซๆๅณใใใใชใใใฉใใ้็ๆๅญๆฐๆธใใฆใชใใใใใธใงใใฐใๆๅญๆฐใใใใใใใชใใฎ๏ผใใ...
ย
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
ย
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
ย
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
ย
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
ย
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
ย
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
ย
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
ย
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
ย
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
ย
Datasheet M48112-S(Battery)
- 1. SMART YOUR ENERGY CAPACITY COMMERCIAL & INDUSTRIAL SERIES 5.7 kWh modular Modular Plug & play Safe Long lifespan BATTERY M48112-S
- 2. Energy Capacity Usable Capacity Depth of Discharge (DoD) Nominal Voltage Operating Voltage Range Internal Resistance Cycle Life 5.7 kWh 5.2 kWh 90% 51.2 V 48 ~ 57.6 V โค 30 mฮฉ โฅ 6000 Electrical BATTERY M48112-S Battery Type Modules Connection Capacity BMU Model Power Consumption Monitoring Parameters Communication 450 x 580 x 165 mm 4 ~ 15 in series 22.9 / 28.6 / 34.4 / 40.1 / 45.9 / 51.6 / 57.3 / 63.1 / 68.8 / 74.5 / 80.2 / 86.0 kWh System voltage, current, cell voltage, cell temperature, PCBA temperature. 65 kg LFP (LiFePO4) IP20 3 Year Product Warranty, 10 Year Performance Warranty Cell Manufacturer System Weight Dimension (W x D x H) IP Protection Warranty Physical Max. Charging Current Max. Discharging Current Operating Temperature Range Humidity Operation BMS Model V04.11062019โฃTextandimagescorrespondtothecurrentstateoftechnologyatthetimeofprinting.Subjecttomodifications.Allinformationiswithoutguaranteeinspiteofcarefulediting-liabilityexcluded. Germany: Alpha ESS Europe GmbH +49 (0) 6103 / 459 160-1 europe@alpha-ess.de www.alpha-ess.de Paul-Ehrlich-Straรe 1a, D-63225 Langen, Hessen Headquarter: Alpha ESS Co., Ltd. +86 (0) 512 6828 7609 info@alpha-ess.com www.alpha-ess.com Level 15,SIPC 158 Wangdun Road SIP Suzhou, 215028 Alpha ESS Suzhou Co., Ltd. +61 (0) 402 500 520 (Sales) +61 1300 968 933 (Technical Support) australia@alpha-ess.com www.alpha-ess.com.au Suite 1, Level 1, 530 Botany Road, Alexandria, NSW, 2015 Australia: Alpha ESS Australia Pty. Ltd. +39 (0) 599 239 50 info@alpha-ess.it www.alpha-ess.it Via Loda,17-41013 Castelfranco Emilia (MO) Alpha ESS Italy S.r.l. +82 64 721 2004 korea@alpha-ess.com 2F, 19-4, Nohyeong 11-gil, Jeju-si, Jeju-do, Republic of Korea Alpha ESS Korea Co., Ltd +86 (0) 513 8060 6891 info@alpha-ess.com www.alpha-ess.com Jiuhua Road 888, Nantong High-Tech Industrial Development Zone, Nantong City, 226300 M48112-S * When the temperature is below 0 ยฐC or above 40 ยฐC, the performance will be limited. 112 A (1C) 112 A (1C) -10 ยฐC ~ 50 ยฐC* 15% ~ 85% < 2 W (Work), < 100 mW (Sleep) CAN and RS-485 compatible HV900112 (TOP BMU required with more than one parallel cluster)