This curriculum vitae provides details on Abdul Hadi Ahmad's personal and professional experience. He has almost 6 years of experience in quality assurance and quality control roles in the oil and gas industry, specializing in inspection and testing of platforms, wells, and pipelines. His responsibilities have included supervising construction works to meet quality standards, carrying out inspections and tests according to specifications, and preparing documentation. He also has experience leading quality teams and possesses strong communication and interpersonal skills. His educational background includes a degree in human resource management and relevant certifications in welding inspection.

1. ABD. HADI AHMAD
CURRICULUM VITAE
Personal Particulars
Name : Abdul Hadi Bin Ahmad
Date of Birth : 09 May 1985
NRIC No. : 850509-01-5055
Passport No : A23979995
CSWIP No. : 619690
PCN No. : 315091
Nationality : Malaysian
Gender : Male
Marital Status : Married
Contact Info
Address : No. 12 Jln Cendana 5,
Taman Rinting
81750 Masai
Johor Bahru
Mobile No. : +6017-7575505
Email : abdul_hadi_ahmad@yahoo.com
Summary Experience
Almost six years working experience in the relevant field of Oil and Gas industries especially
on Construction, Fabrication, Inspection and Testing for Platform such as Wellhead, Central
Processing Platform (CPP), and Floating, Storage & Production (FSP). Most of the experience
is concentrating on QA/QC field. Supervise at site works to ensure to meet the quality
requirements and achieve the project schedule. Carried out inspection and testing are as per
specification agreed. Mainly responsible to carry out day to day inspection and testing
requirement as per Inspection and Test plan, Client Specification requirement, Code and
Standard. The scope of responsibility covered all aspect from Material receiving, Fit-up,
welding inspection (before,during and after welding), coordinating Dimensional and NDT
inspection. Liaise with sub-contractor and other discipline party as a team work for the daily
activities. The responsibility also covered the preparation and readiness of the final
documentation.
In addition, my responsibilities in leading a team of Quality Department have brought me
valuable experience in managing and leading the team. Have held supervising capacities;
possess good interpersonal and communication skills. Able to work independently, willing to
share ideas and contribute knowledge to develop safety and health awareness, culture and
reputable safety performance in the organization. Self-motivated with a high desire in
continuously learning new skills and knowledge.
28 February 2015 Page 1

2. ABD. HADI AHMAD
Working Experience
Company Name : Sapura Kencana Sdn. Bhd (Kencana Pinewell)
Position Title : Mechanical/Piping Inspector
Yard : Kemaman Supply Base (KSB), Phase II
Client : Exxon Mobil Exploration and Production Malaysia Inc. (EMEPMI)
Duration : JAN 2014 – Present
Project :(Provision of Hook- Up, Commissioning and Topside Major Maintenance
Construction Services - A2359125)
Company Name : Sapura Kencana Sdn. Bhd (Kencana Pinewell)
Position Title : Mechanical/Piping Inspector
Yard : Kemaman Supply Base (KSB), Phase II
Client : Exxon Mobil Exploration and Production Malaysia Inc. (EMEPMI)
Duration : MAY 2013 – DEC 2013
Project : (Provision of Construction Services Contract of EMPMI Brownfield Project –
DU- 3744A2)
Company Name : TRANSFAME SDN BHD (PIPING)
Position Title : Welding Inspector
Yard : (MALAYSIA MARINE HEAVY ENGINEERING)
Client : Exxon Mobil Exploration and Production Malaysia Inc. (EMEPMI)
Duration : AUGUST 2012 – APRIL 2013
Project : (TAPIS EOR AND REJUVENATION PROJECT)
Company Name : RHEA OFFSHORE SDN BHD (PIPING)
Position Title : Qc Piping Inspector
Yard : (MALAYSIA MARINE HEAVY ENGINEERING)
Client : Petrofac (Malaysia PM-304) Limited (PML) / MISC
Duration : FEB 2012 - JULY 2012
Project : (FPSO CENDOR PHASE II TOPSIDES)
Company Name : PFC ENGINEERING SDN BHD (MECHANICAL & PIPING)
Position Title : Qc Piping Inspector
Yard : (MALAYSIA MARINE HEAVY ENGINEERING)
Client : Sabah Shell Petroleum Co.Ltd (SSPC)
Duration : JULY 2010 - JAN 2012
Project : (GUMUSUT KAKAP PROJECT - TOPSIDES)
Company Name : SEAGULL ENGINEERING (MECHANICAL & PIPING)
Position Title : Qc Piping Inspector
Yard : (MALAYSIA MARINE HEAVY ENGINEERING)
Client : MALAYSIA INTERGRATED SHIPPING COPRATION (M.I.S.C)
Duration : JAN 2010 - JUN 2010
Project : (RUBY PRINCESS II - TOPSIDES)
Company Name : PRISTINE POTENTIAL (PIPING)
Position Level : Qc Piping Inspector
Client : PETRONAS CARIGALI Sdn. Bhd. (PCSB)
Yard : Sime Darby Engineering
Duration : Jan 2009 - Dec 2009
28 February 2015 Page 2

3. ABD. HADI AHMAD
Project : (TANGGA BARAT DEVELOPMENT PROJECT (Phase 1)
Job Scope as Mechanical Inspector
• Compile test package hydrotest, Iso Metric drawing with markup test limit, P&ID
drawing, weld summary, mechanical check sheet (MCC), punchlist and system
overview commissioning by pipe line system.
• Review and verify test package before submit to Senior Engineering
Inspector (SEI) or Commissioning engineer for approval before
hydrotest activity perform.
• Proceed pipe line walk to ensure all punchlist was state in punclist form and the test
limit is same as drawing mention.
• Proceed flushing until satisfy and then prepare for hydrotest.
• Ensure pressure/temperature recorder, pressure gauge valid calibration then must show
the certificate to Client Representative, and blind flange must be same rating or more
then rightly.
• Keep look chart paper on pressure/temperature recorder for ensure pressure is maintain
and in the same time do pipe line walk to see the high point pressure gauge rich the
pressure during hydrotest.
• Witness boxes up spool and valve activity to ensure production team use the correct
gasket and stub bolt type.
• Proceed flange management every single flange with follow client requirement.
• Carry out re-instatement test before hand over to commissioning engineer and fill up the
MCC to close construction activity.
• Prepare Discipline Acceptance Certificate (DAC) to close the pipe line system in system
overview and get verify with commissioning engineer and SEI for ensure that system
ready for commissioning.
• Do internally pre commissioning before prior commissioning activities and ensure all
equipment instrument related on the pipe line is correct install as per requirement and
make sure painting completed all entire line with stenciling and flow direction line.
• Close the MCC and make the certificate for hand over the pipe line system to Offshore
Installation Manager (OIM).
• Witness leak test activities for vessel after vessel inspection complete and flange
management.
• Assist commissioning engineer and vendor to do load test for crane.
• Do endurance test for compressor and pump until operation platform satisfied.
• Liaise with work supervisor operation platform and OIM to verified all the activities is
completed and MCC completed sign with all parties then ready to start up or energies
platform to back normal and make sure nobody get hurt during start up or energies.
28 February 2015 Page 3

4. ABD. HADI AHMAD
Job Scope as QC Inspector Piping
• Attended daily morning safety briefing, tool box talk and progress weekly safety
briefing.
• Supervise and ensure HSE compliance through project execution and
executed in line with company and client HSE management system.
• To ensure all exotic materials (Stainless steel, cooper nickel, duplex s. steel) has been
applied VCI (vapor chloride inhibitor) for preservation, protection.
• Ensure welding consumables’ are correctly as per WPS requirement.
• Monitor backing and holding temperature of electrode oven, check the consumable in
term the size, type and condition, and make sure record all issuing and returning
electrode.
• Liaise with Qa/Qc Coordinator/Lead or Piping Engineer for any technical queries
related with piping system like a fabrication and installation.
• Perform material verification inspection to identify material grade, type material, size,
dimension and heat number.
• Perform fit-up inspection activity, check and ensure joint in good condition as per WPS
requirement.
• Sketch the detail of line pipe spool for red line mark up for any changes due to
modification.
• Monitor welding activity before, during after and make sure welder follow WPS, and
ensure exotic material has been applied acid pickling for cleaning and prior Visual
Inspection.
• Perform Visual Inspection, check root penetration, external surface welding defect,
alignment and dimensional check after welding (square, levelness and straightness) at
pipe.
• Make a red line mark-up drawing if got any additional occurred.
• Select joint welding for NDT (RT,MPI,DPI,PMI) by drawing and line system as follow
NDT matrix requirement, liaise with NDT Coordinator which joint need to repair and
location of repair.
• Liaise with PWHT technician for witness post weld head treatment and check soaking
time, holding and review the report.
• Carried out inspection for pipe spool and pipe support, check tagging, quantity, condition
and ensure pipe spool in good condition, and make sure internal of pipe free from any
debris and any loose item. Make a blowing inside pipe to proper cleaning before send to
blasting and painting.
• Monitor and liaise with PMT before install pipe spool and pipe support, and make sure
the location is correct.
• Prepare document required and compile for Test Package, such as test package
drawing index, weld summary, punch list, check sheet and etc.
• Check of preparation hydrotest/pneumatic test and do line walk prior hydrotest activity
and raised punch list by category ‘A’ or ‘B’, follow up with construction team to done
the priority category ‘A’ for proceed hydrotest activity .
• Witness hydrotest activity and ensure calibration certificate of temperature, pressure
recorder and permit to work must display at location testing area in the same time
monitor division of pressure during pressure up and holding time.
28 February 2015 Page 4

5. ABD. HADI AHMAD
• Witness flushing and air blow activity and ensure internal clear from any debris has
been removed..
• Carry out line checking and punch killing after hydrostatic test and monitor for
reinstatement test and signoff piping check sheet to close it.
Job Scope as QC Inspector Mechanical
• Monitoring mechanical and piping inspection to comply with current codes and
standards spec (ASME, API, BS, AWS & client specification) with proper QA/QC
Plan.
• Responsible for the preparation of QA/QC documentation for mechanical such as
MVR, Fit-up Report, Summary report according with latest revision of drawing, codes
and Specification.
• Responsible for redline marking of drawing at onshore for piping and mechanical
equipment for As-Built Drawing preparation.
• Received allocates duties and review documentation with scope of work for items
required by client. Raise queries when lack of clarify.
• Perform installation for Mechanical Equipment (Compressors, Generators, Pressure
Vessels, Cranes and monorails) as per approved procedures and specification.
• Check Mechanical Shop Drawings (IFC) as prepared by designers regarding integrity
and Clash checking.
• Monitor project execution for Mechanical / HVAC as per plan schedule.
• Responsible for the preparation of Installation Procedures together with the job risk
assessment (JHA) for the project.
• Monitor equipment fabrication at vendor premises for equipment involved.
• Knowledge regarding ASME VIII Div 1, ASME SECTION IX, ASME SECTION V, API
510 to monitor and make sure all the fabrication of equipment are comply with current
codes and standards.
• Witnessed hydro test, leak test & pneumatic test at vendor premises during FAT/SAT
and make sure all test involved are comply with approved procedures, codes and
specification.
• Reviewed all NDT (RT, UT, DPT, and MPT) report for shop and field activities as per
approved procedures and specification.
• Reviewed all NDT report for acceptance criteria as per applicable construction codes
and specification prior to pressure testing for hold point inspection.
• Monitor welding and fabrication activities, fit-up and visual inspection and NDT (RT,
UT, MPT, and DPT) are complying with IFC drawings together with applicable codes
and standards.
• Liaise with QC subcontractor for the preparation of documentation such as MVR,
Visual Inspection, Fit-Up Inspection, and NDT report together with clients as per
applicable codes and standards..
• Responsible to make sure all the materials involved for construction are comply with
applicable Codes, standards and specification.
• Liaise with Commissioning Engineers for Testing and Commissioning activities.
28 February 2015 Page 5

6. ABD. HADI AHMAD
• Responsible for any STQ (Site Technical Enquires) to obtain Client approval before
any Site change discrepancy with IFC drawings.
• Inspection of material upon receive and reject the material if not comply with
drawings, codes and specification.
• Witnessed hydro test for piping and static equipment with proper technique and
comply with current codes and Specification.
• Liaise with Commissioning Engineers for commissioning activities especially for
N2He Leak Test, Final Closure Activities for Vessels, rotating equipment activities
such as pumps, Compressor, generators (alignment, function test, bump test)
according with client codes and Specification.
• Witness bolt tightening and tensioning every single nozzle, flanges and main hole
before fill up check sheet.
Part of Jobs Responsibility :
• Do MVR (Material Verification Report) for all material prior cutting and fabrication as
per drawing and cutting plan.
• Perform fit-up inspection and dimensional check.
• Leveling, diagonal and vertically dimensional inspection before and after welding.
• Daily monitoring before, during and after welding to verify compliance.
• With specification, procedure and sequence including any preheat, interpass
temperature control and consumables control.
• Assist in prepared all report need traceability and final documentation.
• Assist in prepared and ability to report communicates workmanship to all who
involved.
• Assist in preparation of work such as welder, fitter and others.
Educational Background
Year of Study : January 2005 – December 2008
Level : Degree of Human Resource Management (Hon’s)
Field of Study : Businees of Administration.
Major : Human Resource
Name of Institution : University of Utara Malaysia
Location : Sintok, Kedah.
Year of Study : January 2003 – December 2004
Level : Sijil Tinggi Pelajaran Malaysia (STPM)
Field of Study : Class of Literature
Name of Institution : Sekolah Menengah Kebangsaan Taman Pasir Putih.
Location : Pasir Gudang, Johor Bahru.
Year of Study : January 2001 – December 2002
Level : Sijil Pelajaran Malaysia (SPM).
Field of Study : Class of Commerce
28 February 2015 Page 6

7. ABD. HADI AHMAD
Name of Institution : Sekolah Menengah Kebangsaan Kota Puteri.
Location : Masai, Johor Bahru.
Relevant Course Attended
• Attended Akademi Belia Malaysia CIDB Larkin Johor in Clean/Prep Operative & Blast
Cleaning Operative.
• Attended Welding Inspector CSWIP 3.1.
• Attended Certificate Introduction of Pressure Vessel Inspection Code API 510.
.
Certification / Licenses
• Certified Welding Inspector Level II (PCN No.:315091)
• Certified Visual Inspector 3.0 (CSWIP No.: 619690)
• Certified Radiographic Interpretation Level II (PCN:315091)
• Licenses Grade 5A & 5B BGAS CSWIP (BG619690)
Skill and Knowledge
Inspection
• Visual welding inspection for Arc Welding.
• Understand type of inspection related to pressure vessels, heat exchanger as
recommended by API 510, API 576 And API 653.
• Witnessing all type of pressure testing, WPQT, WPQR, WQT, NDT.
• Understand the requirement of construction code (AWSD1.1,ASME VIII Div. 1, B31.3,
ASME V, and ASME IX).
• Design equipment parts as per required by ASME VIII Div. 1
Project Management
• Able to liaise with Field/Produciton Engineer for any Hook-Up & commissioning
activities for the Mechanical and Piping Works.
NDT
• Ultrasonic Testing (UT) – Basic knowledge only.
• Magnetic Particle Testing (MPI) – able to perform and interpret the result
• Dye Penetration Testing (DPT) – able to perform and interpret the result
• Radiography Testing (RT) – able to perform and interpret the result.
28 February 2015 Page 7

8. ABD. HADI AHMAD
Computer
• MS Office
• MS Excel
• MS Outlook
• MS PowerPoint
Language Proficiency
Bahasa Melayu English
Spoken : Good Spoken : Good
Read : Good Read : Good
Writing : Good Writing : Good
Capabilities
Personal Traits : Confident, interacted well with people at all level.
Availability : 2 month notice
Possess Own Transport : Yes
Learning and Working Capacity
I prefer to work in a fairly organized environment, where my performance can be measured
with some accuracy. I also like to work in a team instead of individual.
Personality
I am hardworking and therefore ready to meet new challenges. I always believe that there are
many things to be learned from experience and should put them to use. Confidence is one of
my inner ability as I have been exposed to highly sensitive issues and confidential
information.
I am therefore trustworthy.
Born leader, optimistic, goal oriented and organizes well. Solving problem in a creative way.
Able to see the picture as a whole or three-dimensional thinking and seeks practical solutions.
Willing to work for group activity. Learn to grow from mistakes and learn to move on.
28 February 2015 Page 8

9. ABD. HADI AHMAD
Reference
Name : Abu Bakar Hassan
Position : Construction Manager
Company : MALAYSIA MARINE & HEAVY ENGINEERING (MMHE WEST)
Telephone : +6013-7442269
Name : Ahmad Kamarul Anuar Nasir
Position : Project Manager
Company : PFC ENGINEERING
Telephone : +6016-6317445 & +6016-3114294
Name : Khairol Iskandar Sham
Position : Lead Qa/Qc Piping
Company : Malaysian Marine & Heavy Engineering (MMHE)
Telephone : +6019-7760931
Name : Mohd Faizal Bin Ahmad Din
Position : QA/QC Coordinator
Company : Rhea Offshore (piping topside) Sdn. Bhd.
Telephone : +6012-7572483
Name : Hasinurrahman Rasyidien B Hashim
Position : Senior Welding Engineer
Company : Sapura Kencana Sdn Bhd (Kencana Pinewell)
28 February 2015 Page 9

10. ABD. HADI AHMAD
Telephone : +6019-9460720 @ +6011-10860720
Name : Johainal Bin Abd Rahim
Position : Qc Engineer
Company : Sapura Kencana Sdn Bhd (Kencana Pinewell)
Telephone : +6019-9067942
28 February 2015 Page 10