Rogelio Bobis Sabas Jr. has over 15 years of experience in commissioning and operating power plants, mining facilities, and cement plants around the world. He has worked as a Commissioning and DCS Operator in Turkey, Lead Operator in Madagascar, and operated mills, crushers, and material handling equipment in Saudi Arabia and the Philippines. His experience includes starting up and shutting down equipment, monitoring and controlling processes, troubleshooting issues, and ensuring safe and efficient operations.

1. ROGELIO BOBIS SABAS JR.
Address: Blk. 2 Lot. 37 Phase 2 Northgate Park Exec. Subd.
Sto. Cristo, City Of San Jose Del Monte Bulacan, Philippines
Contact No. : 09089254943/+905378828871
Email – ad: rogeliosabas@yahoo.com
boyetsabas@yahoo.com
OBJECTIVE: To obtain a responsible and challenging experience with a progressive
company where my work experience will have a valuable application and utilization for
advancement
EMPLOYMENT RECORD
Experience:
SK Engineering & Construction Co. Ltd
Tufanbeyli Thermal Power Plant (3 X 150 MW )
Tufanbeyli, Adana Turkey
February 2015 – Present
Commissioning and DCS Operator
Responsible for Commissioning as DCS Operator, Balance of Plant (BOP),auxiliary Field
Operator, Ball Mill handling, Electro Static Precipitator, Flue Gas Desalination Absorber,
Limestone handling System, Ash Handling System, Bed Ash handling, Coal Handling
System
General Responsibilities
 Performing of sequence start-up and shutdown/ Monitoring and controlling
running and stand-by equipments to maintain normal running condition in Coal
Handling .System Plant and Ball Mill Handling System and FGD Absorber
System.
 Receiving, delivering and recording detailed and accurate information regarding the
status of all equipment and operating conditions Reporting of system faults and
assigning priority actions to work requests.
 Communicate with varied workgroups including Construction, Contractors, maintenance,
third party contractors, external customers and visitors according to Project guidelines to
carry out area commissioning activities.
 Reviewing and preparing commissioning procedures.
 Reporting of system faults and assigning priority actions to work requests.
 Perform air, lube oil and water flushing as well as steam blowing.
 Conduct strainer cleaning on fuel, oil, and cooling water pumps.
 Performing motor solo run test no load test and with load test
 Conducting vibration test temperature on running motors and pumps.
 Performs all turnovers of all concerns and activities in his shift to incoming shift,
to ensure continuity of activities being done.
 Reviews logbook of outgoing shift to ensure everything is properly turned-over to
the incoming shift.
 Report risks and incidents and initiate first response actions to reduce further escalation
of incidents.
 Preparing punch list as per PI&D.

2. SHERRITT AMBATOVY NICKEL PROJECT
(Nickel and Cobalt Refinery Plant)
Lead Operator/ DCS Operator
Utilities Dept. Power and Lime
Toamasina, Madagascar, Africa
September 18, 2012 to Oct. 31, 2013
Lead operator / DCS operator
Position Description
DCS operator reports to a Shift or Plant Supervisor. Monitor and controls the production process
in the area of responsibilities as per established Standard Operating Procedures (SOP) in
Utilities, Rotary Kiln Calcination, Ball Mill, Lime Slacker, Bulk handling, Conveying system and
Supplying limestone slurry and milk of burnt lime to Pressure Acid Leach Plant.. These positions
involve operating several types of process equipment to safety and efficiently produce burnt
lime as well as the by-product created from the production of nickel and cobalt
General Responsibilities
 Work in a team environment to successfully, safety and efficiently operate equipment
containing hazardous substances to achieve plant production targets.
 Operates and maintains optimal operating parameters
 Responsible for chemical cleaning and lube oil flushing
 Exposure in maintenance work such as trainer cleaning, purging, Issue isolation and de-
isolation
 Responsible for the start-up, normal operation, shut down of all equipment.
 Understand and follow procedures and policies to ensure the health and safety of all
workers and Environmental compliance (HSE).
 Work with advance process control technology equipment to monitor and control plant
processes.
 Ensure that the production plan is effectively executed in safe operation of the plant and
equipment in every shift.
 Trouble-shooting and Diagnoses complex process and/or equipment problems affecting
process condition as per operating principles and theory.
 Read process gauges and meters and record all relevant information on log sheets
 Identify, rectify and report all equipment and equipment related problems.
 Monitor and control environment safeguards to ensure compliance.
 Develops communicates and proper co-ordination with the members in the production
process and supports all activities and assist team members to continuously optimize
resources.
 Safely prepare basic equipment for maintenance, following established procedures and
policies.
 Complete all required safety related documents including safe work permit, blinding
sheets, lock registry (LOTO) and ensure all works is carried out safety.
 Safely prepare basic equipment for maintenance, following established procedure and
policies;
 Actively participate in operational meetings and training session as required.
 Teaching and conduct training to the local (field) operators.
 Keeps safety equipment in good working condition at all times.
 Performed good housekeeping in the work place.
 Performed other related duties as may be assigned from time to time by the superior in
the attainment of Department objectives.

3.  Take action to correct deviations to ensure plants targets are met by monitoring SICs.
And ensure air emission data is within the specification to minimize chemicals/utility
usage and actively address to minimize utility waste.
 Reports corresponding incident of hazardous condition and emergencies.
 Comply with the Implementing Safety rules and Regulation of the company
SAUDI CEMENT COMPANY
Cement Mill Operator (Sinoma Plant)
SCC Hofuf Plant, Hofuf, Kingdom of Saudi Arabia
April, 2009 – June 2011
Bulk Material Handling
Acting Foreman (Plant Commissioning, Sinoma Plant)
February, 2008 – April, 2009
Raw Mill Operator (CCR)
August, 2007 – February, 2008
Crusher Operator/Reclaimer Operator
February 11, 2007 – August 2007
General Function:
Operates the mills and related accessories; reports equipment and accessories
performance, abnormalities and malfunctions; maintains records of activities of operations;
performs activities according to established standard procedure and practices.
Duties and Responsibilities:
 Reads records of outgoing mills operator and coordinates activities with local mills
operator and Tender;
 Refer to the production plan or type of cement to be feed; coordinates from electrical
department for the start up of the mills;
 Monitor the equipment parameters and not to exceeds the maximum limit of the motor
current, pressure, temperatures of equipment were the log sheet is available and make
adjustment that can result for the continuous operation of production;
 Stops motor drives and other related equipment when unusual sound is heard, or
whenever called by the local operator to prevent and minimize damage to equipment;
 Monitor the flows of materials / stocked of materials & coordinates from the quality
control department for the result of the quality that set in the standards;
 Make sure that the dust emission are with the minimum limit that required by the
standard;
 Coordinates and report to the shift foreman; electrical department; quality control
for any abnormalities in the equipment and flow of materials;
 Records stoppages and operating hours, downtime and causes of stoppages with
corresponding action to take; turn over remaining activities, follow-up jobs to
In-coming mills operator.
 Complies with company and safety policies, rules and regulation, standard
operating procedures;

4. REPUBLIC CEMENT CORPORATION,LAFARGE
Crusher Operator/Additive Re-claimer/Crusher Transport Tender
Norzagaray, Bulacan, Philippines
January, 1993 – May, 2006
General Function:
Operates Crusher and transport system from the delivery of materials.monitor all
parameters, load amps flow of materials, temperature of the equipment. Reports all
abnormalities to quarry supervisor and to records all activities from time to time.
Duties and Responsibilities:
 Reads records of outgoing crusher operator and coordinates activities with crusher
transport tender (field operator)
 Inspect crusher equipment and auxiliaries before operations ensuring good condition of
apron and wobbler feeder, belt conveyor, hammer bars, coupling and up to discharge
points.
 Coordinates with crusher transport tender start-up operation of crushing equipment,
auxiliaries and machinery.
 Implements proper blending of delivery trucks from the quarry to the crusher hopper
following raw mix design simulation prepared.
 Maintains a uniform flow of material from feeder through crusher and transport
conveyor by monitoring the area and equipment with oversize boulders or metallic
object seen on feeder.
 Reject deliveries of material (LST/Shale) to the crusher when lumps when boulders of
LST/shale that does not conform with the requirements to maintain normal operation of
the crusher.
 Reject deliveries of material (LST) to the crusher when oversize/waste exceeds to the
limit that will cause unnecessary stoppage of the unit due to clogging.
 Stop motor drives and other related equipment when an-usual sound is heard, or
whenever signaled by Crusher Transport tender to prevent or minimize damage to
equipment.
 Maintains records of materials crushed, and delivered and received, reports machine and
equipment malfunction to Crusher transport tender.
 Assist section and maintenance personnel during major and minor maintenance on
crushing equipment and accessories.
 Records material hauling stoppage and operating hours, downtime and cause of
stoppage with corresponding action taken, Turn over remaining activities , follow up
jobs to incoming crusher operator.
 Complies with company and safety policies, rules and regulation, standard operating
procedures.
 Performs ISO Integrated Management System specific task as defined in the program
applicable to the section.
 Performs other related duties as may be assigned to him from time to time by his
superior in the attainment of Department objectives.

5. Skills :
Operates in the DCS Control Room using METSO Wonderware, SCADA ,
Siemens WINCC, Honeywell and PCS7 Siemens
Distributed Control System (DCS) & Field operation and Bulk Handling operation,Can operate
Bobcat , Wheel Loader (988H,980H), OH Truck , Overhead Hoist Crane , Ball mill , Kiln
Calcination, Can operate different types of Crusher (Impact , Jaw Crusher, Hammer ,Coal mill &
Slacking system)
SEMINARS/TRAININGATTENDED:
 REFINERY SITE INDUCTION
 UTILITIES PLANT SITE INDUCTION
 PIPING & INSTRUMENTATION DIAGRAM (P&ID)
 PERMIT USER, EQUIPMENT PREPARER
 PERMIT ACCEPTOR , CONFINED SPACE
 WORK AT HEIGHTS, RESPIRATORY PROTECTION,
 CHEMICAL RISK, SCBA/SABA, WATCHMAN TRAINING
 HEALTH AND SAFETY ENVIRONMENT
 JOB SAFETY ENVIRONMENTAL ANALYSIS
 SAFETY AWARENESS PROGRAM
 CEMENT COMPUTER INSTRUCTION LAFARGE (CECIL)
 ISO 9002 and ISO14001 (EMS)
 5’S PROGRAM ORIENTATION
 TEAM BUILDING and VALUE FORMATIONSEMINAR
PERSONAL PROFILE:
Age : 47
Date of Birth : September 09, 1968
Place of Birth : Polangui, Albay, Philippines
Religion : Roman Catholic
Citizenship : Filipino
Civil Status : Married
No. of Children : 3
Availability for Phone Interview : anytime
EDUCATIONAL BACKROUND:
COLLEGE (1987-1991)
ASSOCIATE IN ELECTRICAL ENGINEERING
FEATI University
Manila, Philippines
VOCATIONAL COURSE
AUTOMOTIVE (1987)
Arellano Evening Vocational School
Manila, Philippines
BASIC WELDING / BASIC ELECTRICITY (1986)
National Manpower Youth Council / NationalManpowerTrainingCenter
Valenzuela City, Philippines