Cts assignment 03
•
0 likes•184 views
The document provides instructions for an assignment on creative thinking skills. Students are asked to take an initial idea from prior mind mapping or workshop exercises and apply the SCAMPER technique to generate new ideas by substituting, combining, adapting, modifying, putting to other uses, eliminating, and rearranging elements of the initial idea. Students must then select the best new idea, create a prototype embodying that idea, and document the process in an idea journal. The goal is to practice innovation by stretching and combining ideas into original forms through ideation techniques.
Report
Share
Report
Share
Download to read offline
Recommended
Survival Techniques
The document provides tips and guidelines for the creative process in communication arts, including using your brain over computer tools for initial sketching, doing thorough research before starting a design, sketching multiple concept ideas, getting feedback from fresh eyes before finalizing, and using appropriate file formats for the intended purpose. Key steps are thorough preparation through research and concept sketches, getting feedback, and delivering final work in a clean, organized manner while properly archiving past work.
DAPHNE AKEH admin CV
This document is a resume for Daphne Ake, an administrative assistant with over 5 years of experience. She has a BA in history, a diploma in secretarial duties, and is proficient in Microsoft Office. Her previous roles include administrative assistant roles at Fast Home Company in Dubai and secretary/receptionist roles at Emerger Limited Company in Cameroon. She is seeking a new role to leverage her skills and experience.
Guia pratico de enfermagem
Material muito bom de enfermagem sobreGuia pratico de enfermagem.
Confira e deixe a sua opinião.
O Instituto Brasileiro Sou Enfermagem é uma Organização Social sem fins lucrativos e que estar de portas abertas para ajudar. Junte-se à nossa família. Chame seus amigos e venham participar.
RIWC Mike Thompson presentation
Barclays UK is committed to making careers accessible to everybody through apprenticeships and diversity initiatives. Apprenticeships and diversity are important to Barclays for their societal impact, ability to retain talent, and challenge norms. The company focuses on the present and future through programs like their Reach Network, which supports colleagues with disabilities, and their Able to Enable internship program, which had a London pilot in November 2016 and aims to be scalable in 2017.
RIWC_Adrian Went presentation
Hovercraft can access locations inaccessible to boats such as shallow water, rapids, marshland, and ice without needing infrastructure. Hovercraft planes over water surfaces at speeds from 10-20 knots, leaving flora and fauna untouched. More than 180 hovercrafts in 41 countries are used for primary or secondary disaster relief roles such as airport rescue, tidal mud and ice rescue, oil spill response, logistics, medical evacuation, and flood rescue at a sixth of the cost of a helicopter.
My home (2)
The document summarizes a girl's home. It has two floors and consists of a living room, five bedrooms, two bathrooms, a kitchen, balcony, and hall. The living room contains two armchairs, a sofa, coffee table, dining table and chairs, carpet, and TV. The author has her own bedroom where she does lessons and there is a nice garden with flowers, trees, and a swimming pool that she likes to care for. The kitchen has a table, cupboard, sink, fridge, and gas cooker and is a favorite place for the family to have meals and chat.
Recommended
Survival Techniques
The document provides tips and guidelines for the creative process in communication arts, including using your brain over computer tools for initial sketching, doing thorough research before starting a design, sketching multiple concept ideas, getting feedback from fresh eyes before finalizing, and using appropriate file formats for the intended purpose. Key steps are thorough preparation through research and concept sketches, getting feedback, and delivering final work in a clean, organized manner while properly archiving past work.
DAPHNE AKEH admin CV
This document is a resume for Daphne Ake, an administrative assistant with over 5 years of experience. She has a BA in history, a diploma in secretarial duties, and is proficient in Microsoft Office. Her previous roles include administrative assistant roles at Fast Home Company in Dubai and secretary/receptionist roles at Emerger Limited Company in Cameroon. She is seeking a new role to leverage her skills and experience.
Guia pratico de enfermagem
Material muito bom de enfermagem sobreGuia pratico de enfermagem.
Confira e deixe a sua opinião.
O Instituto Brasileiro Sou Enfermagem é uma Organização Social sem fins lucrativos e que estar de portas abertas para ajudar. Junte-se à nossa família. Chame seus amigos e venham participar.
RIWC Mike Thompson presentation
Barclays UK is committed to making careers accessible to everybody through apprenticeships and diversity initiatives. Apprenticeships and diversity are important to Barclays for their societal impact, ability to retain talent, and challenge norms. The company focuses on the present and future through programs like their Reach Network, which supports colleagues with disabilities, and their Able to Enable internship program, which had a London pilot in November 2016 and aims to be scalable in 2017.
RIWC_Adrian Went presentation
Hovercraft can access locations inaccessible to boats such as shallow water, rapids, marshland, and ice without needing infrastructure. Hovercraft planes over water surfaces at speeds from 10-20 knots, leaving flora and fauna untouched. More than 180 hovercrafts in 41 countries are used for primary or secondary disaster relief roles such as airport rescue, tidal mud and ice rescue, oil spill response, logistics, medical evacuation, and flood rescue at a sixth of the cost of a helicopter.
My home (2)
The document summarizes a girl's home. It has two floors and consists of a living room, five bedrooms, two bathrooms, a kitchen, balcony, and hall. The living room contains two armchairs, a sofa, coffee table, dining table and chairs, carpet, and TV. The author has her own bedroom where she does lessons and there is a nice garden with flowers, trees, and a swimming pool that she likes to care for. The kitchen has a table, cupboard, sink, fridge, and gas cooker and is a favorite place for the family to have meals and chat.
RIWC Colin Allen_Question Time
The document discusses human rights for deaf people and recognition of sign language. It notes that the World Federation of the Deaf works with the UN and other organizations to realize deaf people's human rights. The UN Convention on the Rights of Persons with Disabilities mentions sign language eight times in five articles related to definitions, accessibility, freedom of expression, education, and participation in cultural activities.
PROFAE - Enfermagem - CADERNO 07
Material muito bom sobre PROFAE - Enfermagem - CADERNO 07.
Confira e deixe a sua opinião.
O Instituto Brasileiro Sou Enfermagem é uma Organização Social sem fins lucrativos e que estar de portas abertas para ajudar. Junte-se à nossa família. Chame seus amigos e venham participar.
#SouEnfermagem
Anatomia e Fisiologia Humana
O documento apresenta um resumo da história da anatomia humana, desde os primeiros estudos realizados por médicos gregos até as descobertas de Vesálio e outros cientistas nos séculos posteriores. Destaca os avanços no estudo sistemático da anatomia a partir da dissecação humana e a importância das ilustrações anatômicas de Vesálio para revolucionar o ensino da área. No século XVII houve muitas descobertas importantes sobre sistemas como circulatório, respiratório e glândulas.
RIWC From Inclusive Education to Inclusive Employment. Dr Scott Thompson Oct5
This document discusses the ongoing journeys of inclusive education and inclusive employment. It outlines the progression from mainstreaming/integration to authentic inclusion in education, and from sheltered workshops to supported employment and customized employment in the field of work. The document explores some issues that arose with different models over time. It also considers how authentic inclusive education and supported/customized employment can learn from one another, such as schools accounting for how inclusion was practiced and the potential impacts of inclusive employment on schools. The document suggests customized employment may be particularly suitable for rural settings.
Disturbios puerperais
Apresentação sobre os distúrbios puerperais.
INFECÇÃO PUERPERAL
HEMORRAGIA PÓS-PARTO
DISTÚRBIOS DA LACTAÇÃO
DISTÚRBIOS PSICOLÓGICOS
PROFAE - Enfermagem - CADERNO 04
Material muito bom sobre PROFAE - Enfermagem - CADERNO 04.
Confira e deixe a sua opinião.
O Instituto Brasileiro Sou Enfermagem é uma Organização Social sem fins lucrativos e que estar de portas abertas para ajudar. Junte-se à nossa família. Chame seus amigos e venham participar.
#SouEnfermagem
Designing Your Career @ amUX Atlanta
Treat your career like a design project. A brief overview of a coaching framework and career design workshop that enables managers and employees alike.
Thinking and working visually for software testers - Nordic Testing Days
This document outlines an agenda for a workshop on visual thinking and working for software testers. The workshop introduces various visual thinking techniques like sketchnoting, mind maps, and modeling to help capture and structure information, develop ideas, and support the testing process. Attendees will learn about these techniques through exercises drawing everyday objects, sketchnoting videos, mind mapping themselves, and visually modeling test coverage and context. The goal is for testers to experience how visual thinking can benefit testing without needing artistic skills. References are also provided for further learning on visual techniques and their application to testing.
G325 a2 q1 a revision part1
This document provides guidance for students on answering an exam question about developing skills for media production from AS to A2. It emphasizes using specific examples to show progression over time in areas like digital technology, creativity, research and planning. The examiner advises practicing writing essays on each skill area and using technical terminology. Students are told to focus on evaluation and reflection rather than just description. Examples of high-scoring student responses are provided to illustrate evaluating the importance and impact of skills.
Lecture 3A – Creation
THE OBJECTIVES OF LECTURE AND ASSESSMENT TASK 3A are:
• To create as many ideas as possible, focusing on breadth of ideas, not necessarily depth.
• To analyze, organize and filter the ideas
• To select the best possible options for an effective design solution
• To illustrate the best ideas in form of sketches
• To prepare for an individual and/or group critique
• To implement the feedback
Lecture 3A – Creation
This document summarizes Lecture 3 of a design course. It is divided into three parts: creation, prototyping, and production. The creation section discusses techniques for generating ideas like brainstorming, selecting the best solution, and illustrating concepts as sketches. Students are then asked to complete an individual assignment by sharing sketches of at least two design ideas with five sketches each for instructor critique. The prototyping and production sections will cover transforming concepts into works and taking the design to audiences.
Assg02 cts august 2018 official v2
This document provides the brief for Assignment 2 which asks students to create a 3D visual pun sculpture larger than 10"x10"x10". Students will work in groups to select an idea using ideation strategies learned in class. They must record their ideation process in an idea journal and upload scans of it along with photos of their final sculpture to their e-portfolio. The sculpture should be brought to class for presentation and can be humorous, allegorical, metaphorical, or a visual oxymoron. Proper recording of the ideation process and elaboration of ideas in the final sculpture will be assessed.
Design Thinking: A Common Sense Process
Design thinking is a process centered around understanding user needs through methods like observation and interviews to define problems and generate innovative solutions. It is an iterative process involving prototyping ideas and testing them with users to refine solutions. Organizations use design thinking to develop more user-centered products and services that better meet customer needs and reduce risks, which can lead to increased profits and differentiation from competitors. The Stanford design thinking process involves the phases of empathizing, defining, ideating, prototyping, and testing to manage projects with a user-focused approach.
Design Thinking Action Lab Conclusions - Take It Home: Apply Design Thinking
Design Thinking Action Lab Conclusions - Take It Home: Apply Design ThinkingDr. Carsten Weerth BSc (University of Glasgow) LLM MA
This document summarizes the conclusions and key learnings from a Design Thinking course. It includes:
1) The student's 3 key takeaways: design thinking is a 5 step process that can be displayed in various ways, empathizing with stakeholders through interviews is important to define problems, and prototyping and testing solutions is necessary.
2) A process map showing the design thinking cycle.
3) An example of applying design thinking to a book project involving multiple authors, outlining the 5 steps from empathizing with stakeholders to testing a project plan.Identity - Example Assignment Brief - BTEC L3 Art and Design Practice - Creat...
This document provides guidance for an assignment brief assessing identity for a creative media or art and design course. It can be used for units A1, A2, or B2, with different expectations for each. The brief asks learners to explore their own identity and develop creative work relating to the theme of "Who am I?" for an exhibition. The document provides details on requirements, inspiration, assessment criteria, and guidance on evidencing skills in informing ideas, problem solving, technical skills, professional practice, and communication through the assignment.
Design process initial ideas - done
Initial ideas are generated through brainstorming and documented through sketches, models, and notes. At this early stage, all ideas are considered valid and useful. Key aspects of initial ideas include visualizing concepts in 2D sketches and 3D models to communicate creative thinking, and relating ideas back to research. A reflective evaluation of initial ideas prepares the designer for the next stage of the design process.
VDIS10011 Restoration Interiors 2 Lecture 4: Concept Development
The document discusses concept development for interior design projects. It explains that a design concept is the underlying idea or framework that guides design decisions. The lecturer outlines several key steps to developing a concept, including defining the design problem, researching the project, brainstorming ideas, and sketching. Verbal and visual aspects of concepts are discussed. Generating ideas through techniques like brainstorming, sketching, and mind mapping is also covered. The concept becomes the roadmap that leads to choices in areas like color, materials, and layout.
VDIS10006 Restoration Interiors 1 Lecture 3: Concept Development
The document discusses concept development for interior design projects. It explains that a design concept is the underlying idea or framework that guides design decisions. The lecturer outlines several key steps to developing a concept, including defining the design problem, researching the project, brainstorming ideas, and sketching. Verbal and visual concepts are discussed as two ways to think about a design concept. The importance of a well-developed concept in directing color choices, layouts, aesthetics and other design elements is emphasized.
If cats were made this way...
I was hired once to review implementation of UCD process in a modern and fast paced publishing company.
It turned out, that a good idea can go wrong, if there’s temptation to subordinate it to managerial comfort - in this case, standardization. Enough to say, the creative process cannot be standardized at all.
My job was to get insight about the situation and find a solution.
After a two week long observation, I came with some conclusion and this presentation. It was just the beginning of fantastic journey with people I love to day.
Intro to user centered design
The document provides an introduction to user-centered design (UCD). It discusses the key phases of the UCD process: research, ideation, prototyping, evaluation, and launch. Research involves understanding user needs and goals. Ideation focuses on generating ideas to solve user problems. Prototyping creates tangible designs to test. Evaluation assesses prototype usability and performance. Launch involves building the final product and measuring real-world usage through analytics and testing. The overall process emphasizes iterative design where learnings are used to continuously refine solutions based on user feedback.
Power of define, ideate power of prototyping
The document provides an overview of the design thinking process, focusing on the Define and Ideate modes. It discusses how defining involves developing a deep understanding of users and problems through activities like interviews, empathy findings, and creating a point of view statement. Ideating involves brainstorming techniques to generate many ideas, with rules like encouraging quantity, deferring judgment, and building on others' ideas. Prototyping is also covered, explaining that prototypes can take many forms and should be used early to explore ideas and test solutions with users through an iterative process. Videos demonstrate examples of prototyping, empathy research, and testing prototypes with users.
More Related Content
Viewers also liked
RIWC Colin Allen_Question Time
The document discusses human rights for deaf people and recognition of sign language. It notes that the World Federation of the Deaf works with the UN and other organizations to realize deaf people's human rights. The UN Convention on the Rights of Persons with Disabilities mentions sign language eight times in five articles related to definitions, accessibility, freedom of expression, education, and participation in cultural activities.
PROFAE - Enfermagem - CADERNO 07
Material muito bom sobre PROFAE - Enfermagem - CADERNO 07.
Confira e deixe a sua opinião.
O Instituto Brasileiro Sou Enfermagem é uma Organização Social sem fins lucrativos e que estar de portas abertas para ajudar. Junte-se à nossa família. Chame seus amigos e venham participar.
#SouEnfermagem
Anatomia e Fisiologia Humana
O documento apresenta um resumo da história da anatomia humana, desde os primeiros estudos realizados por médicos gregos até as descobertas de Vesálio e outros cientistas nos séculos posteriores. Destaca os avanços no estudo sistemático da anatomia a partir da dissecação humana e a importância das ilustrações anatômicas de Vesálio para revolucionar o ensino da área. No século XVII houve muitas descobertas importantes sobre sistemas como circulatório, respiratório e glândulas.
RIWC From Inclusive Education to Inclusive Employment. Dr Scott Thompson Oct5
This document discusses the ongoing journeys of inclusive education and inclusive employment. It outlines the progression from mainstreaming/integration to authentic inclusion in education, and from sheltered workshops to supported employment and customized employment in the field of work. The document explores some issues that arose with different models over time. It also considers how authentic inclusive education and supported/customized employment can learn from one another, such as schools accounting for how inclusion was practiced and the potential impacts of inclusive employment on schools. The document suggests customized employment may be particularly suitable for rural settings.
Disturbios puerperais
Apresentação sobre os distúrbios puerperais.
INFECÇÃO PUERPERAL
HEMORRAGIA PÓS-PARTO
DISTÚRBIOS DA LACTAÇÃO
DISTÚRBIOS PSICOLÓGICOS
PROFAE - Enfermagem - CADERNO 04
Material muito bom sobre PROFAE - Enfermagem - CADERNO 04.
Confira e deixe a sua opinião.
O Instituto Brasileiro Sou Enfermagem é uma Organização Social sem fins lucrativos e que estar de portas abertas para ajudar. Junte-se à nossa família. Chame seus amigos e venham participar.
#SouEnfermagem
Viewers also liked (7)
RIWC From Inclusive Education to Inclusive Employment. Dr Scott Thompson Oct5
RIWC From Inclusive Education to Inclusive Employment. Dr Scott Thompson Oct5
Similar to Cts assignment 03
Designing Your Career @ amUX Atlanta
Treat your career like a design project. A brief overview of a coaching framework and career design workshop that enables managers and employees alike.
Thinking and working visually for software testers - Nordic Testing Days
This document outlines an agenda for a workshop on visual thinking and working for software testers. The workshop introduces various visual thinking techniques like sketchnoting, mind maps, and modeling to help capture and structure information, develop ideas, and support the testing process. Attendees will learn about these techniques through exercises drawing everyday objects, sketchnoting videos, mind mapping themselves, and visually modeling test coverage and context. The goal is for testers to experience how visual thinking can benefit testing without needing artistic skills. References are also provided for further learning on visual techniques and their application to testing.
G325 a2 q1 a revision part1
This document provides guidance for students on answering an exam question about developing skills for media production from AS to A2. It emphasizes using specific examples to show progression over time in areas like digital technology, creativity, research and planning. The examiner advises practicing writing essays on each skill area and using technical terminology. Students are told to focus on evaluation and reflection rather than just description. Examples of high-scoring student responses are provided to illustrate evaluating the importance and impact of skills.
Lecture 3A – Creation
THE OBJECTIVES OF LECTURE AND ASSESSMENT TASK 3A are:
• To create as many ideas as possible, focusing on breadth of ideas, not necessarily depth.
• To analyze, organize and filter the ideas
• To select the best possible options for an effective design solution
• To illustrate the best ideas in form of sketches
• To prepare for an individual and/or group critique
• To implement the feedback
Lecture 3A – Creation
This document summarizes Lecture 3 of a design course. It is divided into three parts: creation, prototyping, and production. The creation section discusses techniques for generating ideas like brainstorming, selecting the best solution, and illustrating concepts as sketches. Students are then asked to complete an individual assignment by sharing sketches of at least two design ideas with five sketches each for instructor critique. The prototyping and production sections will cover transforming concepts into works and taking the design to audiences.
Assg02 cts august 2018 official v2
This document provides the brief for Assignment 2 which asks students to create a 3D visual pun sculpture larger than 10"x10"x10". Students will work in groups to select an idea using ideation strategies learned in class. They must record their ideation process in an idea journal and upload scans of it along with photos of their final sculpture to their e-portfolio. The sculpture should be brought to class for presentation and can be humorous, allegorical, metaphorical, or a visual oxymoron. Proper recording of the ideation process and elaboration of ideas in the final sculpture will be assessed.
Design Thinking: A Common Sense Process
Design thinking is a process centered around understanding user needs through methods like observation and interviews to define problems and generate innovative solutions. It is an iterative process involving prototyping ideas and testing them with users to refine solutions. Organizations use design thinking to develop more user-centered products and services that better meet customer needs and reduce risks, which can lead to increased profits and differentiation from competitors. The Stanford design thinking process involves the phases of empathizing, defining, ideating, prototyping, and testing to manage projects with a user-focused approach.
Design Thinking Action Lab Conclusions - Take It Home: Apply Design Thinking
Design Thinking Action Lab Conclusions - Take It Home: Apply Design ThinkingDr. Carsten Weerth BSc (University of Glasgow) LLM MA
This document summarizes the conclusions and key learnings from a Design Thinking course. It includes:
1) The student's 3 key takeaways: design thinking is a 5 step process that can be displayed in various ways, empathizing with stakeholders through interviews is important to define problems, and prototyping and testing solutions is necessary.
2) A process map showing the design thinking cycle.
3) An example of applying design thinking to a book project involving multiple authors, outlining the 5 steps from empathizing with stakeholders to testing a project plan.Identity - Example Assignment Brief - BTEC L3 Art and Design Practice - Creat...
This document provides guidance for an assignment brief assessing identity for a creative media or art and design course. It can be used for units A1, A2, or B2, with different expectations for each. The brief asks learners to explore their own identity and develop creative work relating to the theme of "Who am I?" for an exhibition. The document provides details on requirements, inspiration, assessment criteria, and guidance on evidencing skills in informing ideas, problem solving, technical skills, professional practice, and communication through the assignment.
Design process initial ideas - done
Initial ideas are generated through brainstorming and documented through sketches, models, and notes. At this early stage, all ideas are considered valid and useful. Key aspects of initial ideas include visualizing concepts in 2D sketches and 3D models to communicate creative thinking, and relating ideas back to research. A reflective evaluation of initial ideas prepares the designer for the next stage of the design process.
VDIS10011 Restoration Interiors 2 Lecture 4: Concept Development
The document discusses concept development for interior design projects. It explains that a design concept is the underlying idea or framework that guides design decisions. The lecturer outlines several key steps to developing a concept, including defining the design problem, researching the project, brainstorming ideas, and sketching. Verbal and visual aspects of concepts are discussed. Generating ideas through techniques like brainstorming, sketching, and mind mapping is also covered. The concept becomes the roadmap that leads to choices in areas like color, materials, and layout.
VDIS10006 Restoration Interiors 1 Lecture 3: Concept Development
The document discusses concept development for interior design projects. It explains that a design concept is the underlying idea or framework that guides design decisions. The lecturer outlines several key steps to developing a concept, including defining the design problem, researching the project, brainstorming ideas, and sketching. Verbal and visual concepts are discussed as two ways to think about a design concept. The importance of a well-developed concept in directing color choices, layouts, aesthetics and other design elements is emphasized.
If cats were made this way...
I was hired once to review implementation of UCD process in a modern and fast paced publishing company.
It turned out, that a good idea can go wrong, if there’s temptation to subordinate it to managerial comfort - in this case, standardization. Enough to say, the creative process cannot be standardized at all.
My job was to get insight about the situation and find a solution.
After a two week long observation, I came with some conclusion and this presentation. It was just the beginning of fantastic journey with people I love to day.
Intro to user centered design
The document provides an introduction to user-centered design (UCD). It discusses the key phases of the UCD process: research, ideation, prototyping, evaluation, and launch. Research involves understanding user needs and goals. Ideation focuses on generating ideas to solve user problems. Prototyping creates tangible designs to test. Evaluation assesses prototype usability and performance. Launch involves building the final product and measuring real-world usage through analytics and testing. The overall process emphasizes iterative design where learnings are used to continuously refine solutions based on user feedback.
Power of define, ideate power of prototyping
The document provides an overview of the design thinking process, focusing on the Define and Ideate modes. It discusses how defining involves developing a deep understanding of users and problems through activities like interviews, empathy findings, and creating a point of view statement. Ideating involves brainstorming techniques to generate many ideas, with rules like encouraging quantity, deferring judgment, and building on others' ideas. Prototyping is also covered, explaining that prototypes can take many forms and should be used early to explore ideas and test solutions with users through an iterative process. Videos demonstrate examples of prototyping, empathy research, and testing prototypes with users.
[PPT] _ Unit 3 _ Experiment.pptx
The document discusses various methods and tools used in the experiment phase of design thinking, including ideation, user experience design, prototyping, and idea refinement. It provides details on specific ideation tools like SCAMPER, analogy inspiration, and deconstructing and reconstructing. It also covers mapping the user experience journey and creating low and high fidelity prototypes. The overall purpose of the experiment phase and these methods is to generate ideas and make them tangible through prototyping to get user feedback and refine concepts.
Introduction to Design Thinking
This document outlines a presentation on design and the design process. It includes:
- An agenda covering design, UI/UX, and a 5-step design process
- Exercises walking through each step of the process using a hypothetical synthesizer redesign as an example
- Recaps summarizing the key points about kickoff, research, design brief, ideation, evaluation, and presentation.
Intro to Design (Lecture)
In the fall of 2018, I was asked to present a guest lecture to first year students enrolled in the Business Technology Management program at Ryerson University.
Open Source Thinking Tools in Digital Product Design- VIBE WIRE
This is the core presentation for the Workshop I ran at Vibewire on 13th August 2013.
Additional resources and some artifacts generated on the night have been included in the uploaded version here.
If you're interested in Thinking tools, Open Source, Design thinking, and or Running your own 'Design Studio' then you should definitely take a look.
Rapid Prototyping in UX Design
Prototyping is a great way of developing, communicating and validating design ideas and requirements in a quick and cost-effective manner, when devising a user experience.
This presentation discusses what prototypes are, why they are useful, the various tools that can be used and some basic principles to adopt.
This presentation was delivered by Stephen Denning as part of the User Vision Breakfast Briefing series in 2012.
Similar to Cts assignment 03 (20)
Thinking and working visually for software testers - Nordic Testing Days
Thinking and working visually for software testers - Nordic Testing Days
Design Thinking Action Lab Conclusions - Take It Home: Apply Design Thinking
Design Thinking Action Lab Conclusions - Take It Home: Apply Design Thinking
Identity - Example Assignment Brief - BTEC L3 Art and Design Practice - Creat...
Identity - Example Assignment Brief - BTEC L3 Art and Design Practice - Creat...
VDIS10011 Restoration Interiors 2 Lecture 4: Concept Development
VDIS10011 Restoration Interiors 2 Lecture 4: Concept Development
VDIS10006 Restoration Interiors 1 Lecture 3: Concept Development
VDIS10006 Restoration Interiors 1 Lecture 3: Concept Development
Open Source Thinking Tools in Digital Product Design- VIBE WIRE
Open Source Thinking Tools in Digital Product Design- VIBE WIRE
More from Lam Yu
Group presentation compiled and updated 2
The document discusses several construction estimating software programs, including CostX, Buildsoft, Autodesk Quantity Take-Off, Cubicost by Glodon, and WinQS. For each software, the document provides information on the company, key functions, and potential limitations. It also includes details on the measuring and estimating capabilities of the different programs.
Lamyu column 6 f (1)
1. The document calculates the dead loads and live loads on column 6F at the ground and roof levels of a building. At the ground level, the total dead load is 233.03kN and the total live load is 143.96kN. At the roof level, the total dead load is 34.86kN and the total live load is 9.64kN.
2. It then calculates the ultimate load on the column, which is the sum of the total dead loads multiplied by 1.4 and the total live loads multiplied by 1.6. The ultimate load is calculated to be 443.42kN.
Lamyu column 1 e
This document contains calculations for the dead and live loads on column 1E of a building structure at ground and roof levels. At ground level, the total dead load is 108.52kN and total live load is 12.84kN. At roof level, total dead load is 15.54kN and total live load is 4.28kN. The ultimate load on the column is calculated to be 201.08kN by applying load factors of 1.4 for dead loads and 1.6 for live loads.
Lamyu 4
1) The document analyzes several two-way slabs and calculates their dead and live loads. It then determines the ultimate loads and reaction forces for beams E/3-5 and E/5-5a.
2) The total dead loads on beam E/3-5 is 22.89 kN/m and on beam E/5-5a is 29.31 kN/m. The total live loads are 5.75 kN/m and 9.32 kN/m respectively.
3) The ultimate loads are 41.25 kN/m and 55.95 kN/m respectively. The reaction forces are calculated to be Ra = 135.86kN
Lamyu 3
1) The document analyzes three slabs and determines they are all two-way slabs based on ratios of lengths.
2) It then calculates the dead and live loads on each slab and beam based on slab and beam sizes and densities.
3) The ultimate loads and reaction forces at supports are determined, with the maximum reaction force being 185.02kN.
4) Bending moment and shear diagrams are drawn to visualize the internal forces.
Lamyu 2
1) The document analyzes a two-way slab and beam structure to determine loadings and reactions.
2) It is determined that two slabs are two-way slabs based on their Lx/Ly ratios being less than 2.
3) Dead loads, live loads, and ultimate loads are calculated for the slabs and beam.
4) Reactions of 77.68 kN and 77.67 kN are calculated at the supports for the beam.
Lamyu 1
This document analyzes a two-way concrete slab and its supporting beams. It determines that three slab sections are two-way slabs based on their length-to-width ratios. It then calculates the dead and live loads on the slabs and beams. The ultimate loads are found by applying load factors to the dead and live loads. Reactions at the supports are calculated as 121.96 kN and 76.85 kN using the method of sections. The shear and bending moment diagrams are drawn.
Estimating final
This document contains information about a construction company called HEX'P Sdn. Bhd. It includes the company profile, vision, mission, organisational structure, awards received, past projects completed, and reasons for choosing them for a construction project. The company aims to be a world-class leader in construction through quality, safety, and implementing latest technology such as a mobile construction management app. It has received several awards and recognition from CIDB Malaysia for achievements in past projects.
Estimating presentation (final)
The document discusses various methods for estimating construction costs. It describes the unit method, square meter method, cubic meter method, approximate quantities method, elemental method, and comparative method. It then selects the square meter method as the most appropriate for providing a cost estimate for a medium-cost housing development based on preliminary sketch drawings within a one day timeframe. The square meter method allows for a quick estimate, can be used early based on preliminary drawings, and does not require extensive expertise to apply.
Supply chain invidividual123123
TU Property Development Group is developing an FF Condominium project near One Utama Shopping Mall on a 10 acre land parcel. The proposed project will include a 28-story condominium building with two floor plans - a larger four-room unit and a smaller four-room unit. The target customers are families and those seeking an affordable housing option near the shopping mall amenities. The developer will use traditional procurement methods and marketing strategies like social media, flyers, signage, and roadshows to promote sales of the condominium units.
Supply chain invidividual
TU Property Development Group is a major Malaysian property developer established in 1967. They have collaborated with other large companies on projects across Malaysia and globally. Their proposed project is the development of FF Condominium, a 28-story residential building next to the popular One Utama Shopping Mall. The target market for FF Condominium are families and individuals in the surrounding area, taking advantage of the strategic location and amenities nearby. TU Property Development Group will utilize various marketing strategies such as social media to promote FF Condominium and achieve their sales target.
Ms (1)
This document provides information about an interior design firm that specializes in Asian-inspired interior design. It includes the company's vision, mission, values, design philosophy focusing on Zen features and Asian elements. It also outlines the company's objectives, organizational structure, job roles, recruitment needs, and strategic plans to promote Asian interior design locally and internationally.
Sc bim
This document provides an overview of Building Information Modelling (BIM) and its various dimensions. It discusses BIM, the BIM cycle, and dimensions such as 3D, 4D, 5D, 6D, and 7D BIM. For each dimension, it provides an introduction, example software, advantages and disadvantages. The goal of BIM is to create and manage information about a building project using a digital 3D model and shared database. Adding additional dimensions such as time (4D) and cost (5D) allows for improved planning, cost estimation, and sustainability analysis over the lifespan of a building project.
Bs1 (1)
The document compares single-phase and three-phase electric power. Single-phase power uses two conductors and a lower voltage of 230V, while three-phase uses three conductors and a higher voltage of 415V. Three-phase power allows for greater power transfer capability and is more efficient. It is better suited for large electric motors and industrial applications, while single-phase is used for lighter loads like lighting and heating.
Final ct aa slides
This document discusses post-tensioning structural elements. It begins by defining pre-stressed and post-tensioned concrete. Pre-stressed concrete involves tensioning tendons before casting, while post-tensioned concrete involves tensioning tendons after casting once the concrete has gained strength. Common post-tensioned elements include slabs, beams, bridges and foundations. The document then compares bonded and unbonded post-tensioning systems and their processes. It concludes by discussing advantages and challenges of post-tensioning as well as examples of post-tensioning in real life projects.
Smart tunnel
The document discusses stormwater management and provides details about the SMART Tunnel in Kuala Lumpur, Malaysia. The SMART Tunnel is a 9.7km dual-purpose tunnel that functions as both a stormwater bypass and motorway. It has unique features like automated flood control gates, ventilation systems, radio broadcasting, air quality monitoring and emergency vehicles to handle its dual usage. The tunnel has helped reduce flooding in Kuala Lumpur and ease traffic congestion.
Bs finallll (1)
This document provides an introduction to sustainable stormwater management. It discusses that stormwater runoff from impervious surfaces can cause water pollution and flooding. Traditional stormwater drainage systems exacerbate these issues by rapidly routing runoff to streams. Sustainable stormwater management techniques like low impact development and best management practices aim to manage stormwater quality and quantity on-site. Examples of sustainable techniques discussed include rain gardens, bio-retention areas, vegetated swales, and dry swales. The document outlines the installation process and design considerations for rain gardens and bio-retention areas.
Site surveying-almost-1
The document provides information on leveling techniques used in surveying, including definitions of key terms, methods for recording leveling data, and how to perform differential leveling. It describes tools used for leveling like the automatic level and staff, and covers the process of establishing elevations and measuring height differences between points. The document serves as a guide for students conducting a leveling fieldwork project as part of their surveying coursework.
Site surveying-2-done-1
This document provides information on traversing and the tools used for traversing surveys. It discusses the components of a traverse including bearing, length of lines, latitude and departure. It also outlines the apparatus used for traversing including theodolites, tripods, rods and plummets. The document covers open and closed traverses, types of traverses such as loop and connecting traverses. It provides details on traverse computation steps such as balancing angles, determining bearings, checking for errors and adjusting for misclosures.
Pile cap
This document discusses pile caps and their construction. It contains several sections:
- An introduction to pile caps, which distribute loads from columns over piles.
- Reasons for using pile caps, such as stabilizing piles and transmitting loads to the ground.
- Advantages of precast pile caps like being made off-site and rapid construction.
- The pile driving process which involves excavation, lifting piles, and hammering them into the ground.
- How pile caps are constructed by cutting piles, forming, reinforcing, and pouring concrete.
- Potential issues like delays from rain and deformities or failures of improperly installed pile caps.
More from Lam Yu (20)
Recently uploaded
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Recently uploaded (20)
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Cts assignment 03
- 1. Creative Thinking Skills DST30204/ARC30104 CTS Assignment 03 Synopsis: After working in some workshops facilitated by your tutors regarding mind-mapping and other exercises, you would have obtained and generated some ideas! There would have been some strategies, which you have used to provide the subject matter to work with. But would this be enough? Can we take this further? Can this be an original idea? How far can you go to innovate? Remember the ‘formula’: Imagination + creativity = innovation! Imagination: your mental abilities to brainstorm and present your ideas! Creativity: the ability to translate the imagination onto surface! Sketching and illustrating them. Innovation: modifying them further and bringing them to life! Synectics is the process of bringing all the process of modifications and hybridization together to form an original idea! However let’s use SCAMPER! The Brief: Use SCAMPER technique to stretch the existing idea and create an original idea! This will involve combinations and the synectic process! Task: Select the best idea from your ideation mind-maps, workshops/exercises and subject this idea to seven processes of SCAMPER. Substitute -‐ Idea 2 Idea 01 Combine -‐ Idea 3 Adapt -‐ Idea 4 Modify, miniaturize, magnify -‐ Idea 5 Put to other uses -‐ Idea 6 Eliminate -‐ Idea 7 Reverse or rearrange -‐ Idea 8 Pick one of the SCAMPER ideas, which best fulfills your goal and objective! Use that final idea to create the final prototype! Bear in mind, that you might subject it to more modifications as you are constructing it! That is okay as along as you indicate this in your IDJ! Criteria (read and understand): • This is primarily an individual assignment. Other arrangements are at the discretion of the respective lecturers. They MUST be consulted! • All ideas MUST be illustrated will good finishing! In the IDJ • Must have good quantity of ideation processes! • The prototype must be constructed well and intelligently with excellent finishing quality! • Presentation of the prototype MUST be accompanied with the visuals in your IDJ or with your IDJ. These are evidence, which supports your final work! Tips: - Refer to the assessment rubric for guide in obtaining your best scores! - Always remember to quantify your ideas! Therefore talking about your ideas will help! - For extra and bonus scores, capture the construction of your final product using time- lapse (optional) - Use any material - No limit to the size and type of the final outcome as long as it is intelligently designed and constructed – take into consideration, transporting it, weather, fragility and etc - Remember, this isn’t an art project! This is an ideation project! CTS is about ideas and innovation! So if you are from another discipline, and if you want to relate to an aspect of your discipline! - Video tutorial is available at: https://youtu.be/sW_ChwWSCRQ This assignment is valued at 10% (20 point score obtainable from the assessment rubric)