For more course tutorials visit
www.tutorialrank.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information
For more course tutorials visit
www.tutorialrank.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You
Open-Source Security Management and Vulnerability Impact AssessmentPriyanka Aash
Re-usage of Open Source Software (OSS) has increased in commercial software development by orders of magnitude. This presentation will show how OSS vulnerabilities can be managed at large scale (about 10,000 OSS usages in our case), and how to address sins from the past. At last a concept will be shown which automates the analysis of the exploitability potential of an insecure OSS component.
(Source: RSA USA 2016-San Francisco)
AUTOMATED PENETRATION TESTING: AN OVERVIEWcscpconf
The using of information technology resources is rapidly increasing in organizations,
businesses, and even governments, that led to arise various attacks, and vulnerabilities in the
field. All resources make it a must to do frequently a penetration test (PT) for the environment
and see what can the attacker gain and what is the current environment's vulnerabilities. This
paper reviews some of the automated penetration testing techniques and presents its
enhancement over the traditional manual approaches. To the best of our knowledge, it is the
first research that takes into consideration the concept of penetration testing and the standards
in the area.This research tackles the comparison between the manual and automated
penetration testing, the main tools used in penetration testing. Additionally, compares between
some methodologies used to build an automated penetration testing platform.
Five Common Mistakes made when Conducting a Software FMECAAnn Marie Neufelder
The software FMECA is a powerful tool for identifying software failure modes but there are 5 common mistakes that can derail the effectiveness of the analysis.
Derek Milroy, IS Security Architect at U.S. Cellular Corporation, defined “vulnerability management” and how it affects today’s organizations during his presentation at the 2014 Chief Information Security Officer (CISO) Leadership Forum in Chicago on Nov. 19. In his presentation, “Enterprise Vulnerability Management/Security Incident Response,” Milroy noted vulnerability management has different meanings to different organizations, but an organization that utilizes vulnerability management processes can effectively safeguard its data.
According to Milroy, an organization should develop its own vulnerability management baselines to monitor its security levels. By doing so, Milroy said an organization can launch and control vulnerability management systems successfully. In addition, Milroy pointed out that vulnerability management problems occasionally will arise, but a well-prepared organization will be equipped to handle such issues: “Problems are going to happen … You have to work with your people. This can translate to any tool that you’re putting in place. Make sure your people have plans for what happens when it goes wrong, because it’s going to [happen] every single time.”
Milroy also noted that having actionable vulnerability management data is important for organizations of all sizes. If an organization evaluates its vulnerability management processes regularly, Milroy said, it can collect data and use this information to improve its security: “The simplest rule of thumb for vulnerability management, click the report, hand the report to someone. Don’t ever do that. There is no such thing as a report from a tool that you can just click and hand to someone until you first tune it and pare it down.”
- See more at: http://www.argylejournal.com/chief-information-security-officer/enterprise-vulnerability-managementsecurity-incident-response-derek-milroy-is-security-architect-u-s-cellular-corporation/#sthash.Buh6CzLS.dpuf
Penetration testing services also described as pen testing or ethical hacking is the method of testing a network, website, or mobile application to find security weaknesses which could be exploited by a hacker.Penetration testing can be automated with software apps or executed manually. The principal goal of penetration testing is to discover security vulnerabilities.
https://www.smore.com/8hv31-penetration-testing-services
Software Failure Modes Effects Analysis is a method of identifying what can go wrong with the software. Software testing generally focuses on the positive test cases. The SFMEA focuses on analyzing what can go wrong.
Many companies and agencies conduct IT audits to test and assess the.docxtienboileau
Many companies and agencies conduct IT audits to test and assess the rigor of IT security controls in order to mitigate risks to IT networks. Such audits meet compliance mandates by regulatory organizations. Federal IT systems follow Federal Information System Management Act (FISMA) guidelines and report security compliance to US-CERT, the United States Computer Emergency Readiness Team, which handles defense and response to cyberattacks as part of the Department of Homeland Security. In addition, the Control Objective for Information Technology (COBIT) is a set of IT security guidelines that provides a framework for IT security for IT systems in the commercial sector.
These audits are comprehensive and rigorous, and negative findings can lead to significant fines and other penalties. Therefore, industry and federal entities conduct internal self-audits in preparation for actual external IT audits, and compile security assessment reports.
In this project, you will develop a 12-page written
security assessment report
and
executive briefing (slide presentation)
for a company and submit the report to the leadership of that company.
There are six steps to complete the project. Most steps in this project should take no more than two hours to complete, and the project as a whole should take no more than three weeks to complete. Begin with the workplace scenario, and then continue to Step 1.
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram:
[diagram and report]
Include the following areas in this portion of the SAR:
Security requirements and goals for the preliminary security baseline activity.
Typical attacks to enterprise networks and their descriptions. Include Trojans, viruses, worms, denial of service, session hijacking, and social engineering. Include the impacts these attacks have on an organization.
Network infrastructure and diagram, including configuration and connections. Describe the security posture with respect to these components and the security employed: LAN, MAN, WAN, enterprise. Use these questions to guide you:
What are the security risks and concerns?
What are ways to get real-time understanding of the security posture at any time?
How regularly should the security of the enterprise network be tested, and what type of tests should be used?
What are the processes in play, or to be established to respond to an incident?
Workforce skill is a critical success factor in any.
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline
Cst 630 Education is Power/newtonhelp.comamaranthbeg73
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You
Open-Source Security Management and Vulnerability Impact AssessmentPriyanka Aash
Re-usage of Open Source Software (OSS) has increased in commercial software development by orders of magnitude. This presentation will show how OSS vulnerabilities can be managed at large scale (about 10,000 OSS usages in our case), and how to address sins from the past. At last a concept will be shown which automates the analysis of the exploitability potential of an insecure OSS component.
(Source: RSA USA 2016-San Francisco)
AUTOMATED PENETRATION TESTING: AN OVERVIEWcscpconf
The using of information technology resources is rapidly increasing in organizations,
businesses, and even governments, that led to arise various attacks, and vulnerabilities in the
field. All resources make it a must to do frequently a penetration test (PT) for the environment
and see what can the attacker gain and what is the current environment's vulnerabilities. This
paper reviews some of the automated penetration testing techniques and presents its
enhancement over the traditional manual approaches. To the best of our knowledge, it is the
first research that takes into consideration the concept of penetration testing and the standards
in the area.This research tackles the comparison between the manual and automated
penetration testing, the main tools used in penetration testing. Additionally, compares between
some methodologies used to build an automated penetration testing platform.
Five Common Mistakes made when Conducting a Software FMECAAnn Marie Neufelder
The software FMECA is a powerful tool for identifying software failure modes but there are 5 common mistakes that can derail the effectiveness of the analysis.
Derek Milroy, IS Security Architect at U.S. Cellular Corporation, defined “vulnerability management” and how it affects today’s organizations during his presentation at the 2014 Chief Information Security Officer (CISO) Leadership Forum in Chicago on Nov. 19. In his presentation, “Enterprise Vulnerability Management/Security Incident Response,” Milroy noted vulnerability management has different meanings to different organizations, but an organization that utilizes vulnerability management processes can effectively safeguard its data.
According to Milroy, an organization should develop its own vulnerability management baselines to monitor its security levels. By doing so, Milroy said an organization can launch and control vulnerability management systems successfully. In addition, Milroy pointed out that vulnerability management problems occasionally will arise, but a well-prepared organization will be equipped to handle such issues: “Problems are going to happen … You have to work with your people. This can translate to any tool that you’re putting in place. Make sure your people have plans for what happens when it goes wrong, because it’s going to [happen] every single time.”
Milroy also noted that having actionable vulnerability management data is important for organizations of all sizes. If an organization evaluates its vulnerability management processes regularly, Milroy said, it can collect data and use this information to improve its security: “The simplest rule of thumb for vulnerability management, click the report, hand the report to someone. Don’t ever do that. There is no such thing as a report from a tool that you can just click and hand to someone until you first tune it and pare it down.”
- See more at: http://www.argylejournal.com/chief-information-security-officer/enterprise-vulnerability-managementsecurity-incident-response-derek-milroy-is-security-architect-u-s-cellular-corporation/#sthash.Buh6CzLS.dpuf
Penetration testing services also described as pen testing or ethical hacking is the method of testing a network, website, or mobile application to find security weaknesses which could be exploited by a hacker.Penetration testing can be automated with software apps or executed manually. The principal goal of penetration testing is to discover security vulnerabilities.
https://www.smore.com/8hv31-penetration-testing-services
Software Failure Modes Effects Analysis is a method of identifying what can go wrong with the software. Software testing generally focuses on the positive test cases. The SFMEA focuses on analyzing what can go wrong.
Many companies and agencies conduct IT audits to test and assess the.docxtienboileau
Many companies and agencies conduct IT audits to test and assess the rigor of IT security controls in order to mitigate risks to IT networks. Such audits meet compliance mandates by regulatory organizations. Federal IT systems follow Federal Information System Management Act (FISMA) guidelines and report security compliance to US-CERT, the United States Computer Emergency Readiness Team, which handles defense and response to cyberattacks as part of the Department of Homeland Security. In addition, the Control Objective for Information Technology (COBIT) is a set of IT security guidelines that provides a framework for IT security for IT systems in the commercial sector.
These audits are comprehensive and rigorous, and negative findings can lead to significant fines and other penalties. Therefore, industry and federal entities conduct internal self-audits in preparation for actual external IT audits, and compile security assessment reports.
In this project, you will develop a 12-page written
security assessment report
and
executive briefing (slide presentation)
for a company and submit the report to the leadership of that company.
There are six steps to complete the project. Most steps in this project should take no more than two hours to complete, and the project as a whole should take no more than three weeks to complete. Begin with the workplace scenario, and then continue to Step 1.
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram:
[diagram and report]
Include the following areas in this portion of the SAR:
Security requirements and goals for the preliminary security baseline activity.
Typical attacks to enterprise networks and their descriptions. Include Trojans, viruses, worms, denial of service, session hijacking, and social engineering. Include the impacts these attacks have on an organization.
Network infrastructure and diagram, including configuration and connections. Describe the security posture with respect to these components and the security employed: LAN, MAN, WAN, enterprise. Use these questions to guide you:
What are the security risks and concerns?
What are ways to get real-time understanding of the security posture at any time?
How regularly should the security of the enterprise network be tested, and what type of tests should be used?
What are the processes in play, or to be established to respond to an incident?
Workforce skill is a critical success factor in any.
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline
Cst 630 Education is Power/newtonhelp.comamaranthbeg73
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
Project 1CST630 Project ChecklistStudent Name DateNote This chedavieec5f
Project 1CST630 Project ChecklistStudent Name: Date:Note: This checklist is designed based on the required project deliverables in the project steps and instructions in the classroom to help students and professors effectively write papers and evaluate assignment submissions respectively. Currently, it supplements the course grading rubric and it's use is optional. The Department welcomes any recommendation(s) for improvement.Project 1: Requires the Following THREE PiecesAreas to Improve1. Security Assessment Report (SAR)(12 pages minimum, double-spaced)2. Executive Briefing Slides (3 to 5 slides) 3. Lab Experience Report with ScreenshotsSpecific Details1. Security Assessment Report (12 pages)Conduct a Security Analysis Baseline (3 of 12 ages)Security requirements and goals for the preliminary security baseline activity.Typical attacks to enterprise networks and their descriptions. Include Trojans, viruses, worms, denial of service, session hijacking, and social engineering.Include the impacts these attacks have on an organization.Network infrastructure and diagram, including configuration and connections Describe the security posture with respect to LAN, MAN, WAN, enterprise.Network infrastructure and diagram, including configuration and connections and endpoints. What are the security risks and concerns?What are ways to get real-time understanding of the security posture at any time?How regularly should the security of the enterprise network be tested, and what type of tests should be used?What are the processes in play, or to be established to respond to an incident?Does the security workforce have the requisite technical skills and command of the necessary toolsets to do the job required?Is there an adequate professional development roadmap in place to maintain and/or improve the skill set as needed?
Describe the ways to detect these malicious code and what tactics bad actors use for evading detection.In the network diagram: include the delineation of open and closed networks, where they co-exist.In the open network and closed network portion, show the connections to the InternetPhysical hardware components. Include routers and switches. What security weaknesses or vulnerabilities are within these devices?Discuss operating systems, servers, network management systems.data in transit vulnerabilities
endpoint access vulnerabilities
external storage vulnerabilities
virtual private network vulnerabilities
media access control vulnerabilities
ethernet vulnerabilities
Possible applications. Current and future mobile applications and possible future Bring Your Own Device policy. Include:
remediation
mitigation
countermeasure
recovery
Provide the methods used to provide the protections and defenses.From the identification of risk factors in the risk model, identify the appropriate security controls from NIST SP 800-53A and determine their applicability to the risks identified.Determine a Network Defense Strategy 2/12 pagesOutline how you would ...
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
Click the following link to learn more about security management: Security Management.
In the next step, you will explore a scenario on suspicious behavior, and your report will provide another section of your CIR.
Step 2: Track Suspicious Behavior
You've completed your wireless and BYOD security plan. Now it's time to take a look at another workplace situation.
You have been notified of an employee exhibiting suspicious behavior. You decide to track the employee's movements by using various tools and techniques. You know the location and time stamps associated with the employee's mobile device.
How would you track the location of the company asset?
Explain how identity theft could occur and how MAC spoofing could
member is a security software architect in a cloud service provider .docxwkyra78
member is a security software architect in a cloud service provider company, assigned to a project to provide the client with data integrity and confidentiality protections for data in transit that will be using applications in the cloud. Your client is an HR company that is moving HR applications and HR data into a community cloud, sharing tenancy with other clients. Your company has set up a software as a service, SAS, offering for its client base.
The data that the HR company will be pushing to and from the cloud will contain sensitive employee information, such as personally identifiable information, PII. You will have to address sensitive data and transit issues of the client data using the HR applications stored in the cloud, and provide a life cycle management report that includes solutions to the cloud computing architect of your company.
Software Development Life Cycle
Technology development and implementation usually follow a software development life cycle (SDLC) methodology. This approach ensures accuracy of information for analysis and decision making, as well as appropriate resources for effective technology management.
You and your team members will use components of the SDLC methodology to develop a
life cycle management report
for the cloud computing architect of a company. This is a group exercise, representing the kind of collaboration often required in the cybersecurity technology community.
There are 11 steps to lead you through this project. Similar steps are typically used in organizational SDLC projects. Most steps should take no more than two hours to complete, and the entire project should take no more than three weeks to complete. Begin with the workplace scenario, and then continue with Step 1: “Initiating the Project.”
Life Cycle Management Report:
A 10- to 15-page double-spaced Word document on data protection techniques for a cloud-based service with citations in APA format. The page count does not include figures or tables. There is no penalty for using additional pages if you need them. Include a minimum of six references. Include a reference list with the report.
As the cloud security architect, you must understand the security development life cycle process. Review the following resources to learn about the security development life cycle process:
security development life cycle
software development methodologies
Click the following links to learn more about critical infrastructure sectors:
Critical Infrastructure Sectors
. Read their descriptions and consider which sector you support in your role.
Process Control Systems: Cybersecurity and Defense
To be completed by a designated team member:
You will begin your Life Cycle Management Report now.
Choose a fictional or actual organization. Describe the mission of the organization and the business need to move to a cloud environment.
Identify the scope of the security architecture and include a topology. To narrow your scope, focus on is.
For more course tutorials visit
www.newtonhelp.com
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
For more course tutorials visit
www.tutorialrank.com
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
NGOKAN - ATTENTIONPROJECT 3 – ASSESSING INFORMATION SYSTEM VULNE.docxtaitcandie
NGOKAN - ATTENTION
PROJECT 3 – ASSESSING INFORMATION SYSTEM VULNERABILITY AND RISK MITIGATION -
I WILL DO THE LAB, JUST NEED HELP WITH THE SAR and RAR (reports)
Intro video on the deliverables is here
https://youtu.be/rStxKMeGXAI
Please select part of your references from this below.
http://resources.sei.cmu.edu/library/
SEE ATTACHED DOCUMENTS FOR READING AND REFERENCE
The deliverables for this project are as follows:
Security Assessment Report (SAR): This should be an
8-page
double-spaced Word document with citations in APA format. The page count does not include figures, diagrams, tables, or citations.
2.
Risk Assessment Report (RAR): This report should be
a 5-page
double-spaced Word document with citations in APA format. The page count does not include figures, diagrams, tables, or citations.
Please select part of your references from this below.
http://resources.sei.cmu.edu/library/
Pick an organization of your choice (pick from any sector, be creative)
1.
Security Assessment Report (SAR) with the following sections: please pay attention to details of the ENTIRE requirements (use figures, tables and diagrams where applicable)
·
Organizational Background
Describe the background of the organization you have picked
Purpose
Describe purpose of the assessment (refer to the incident of OPM below in the transcript)
Organizational structure
o
Describe the organizational structure, the network system description, and a diagram of the organization.
(Please insert this diagram)
Include LAN, WAN, and systems in diagram format (
use the OPM systems model of LAN side networks)
, the intra-network, and WAN side networks, the Internet. Identify the boundaries that separate the inner networks from the outside networks.
o
include a description of how these platforms are implemented in your organization: common computing platforms, cloud computing, distributed computing, centralized computing, secure programming fundamentals.
(cite reference)
o
What insider threats are a risk to your organization
o
differentiate between the external threats to the system and the insider threats. Identify where these threats can occur in the previously created diagrams.
(cite reference)
o
Define threat intelligence, and explain what kind of threat intelligence is known about the OPM breach. Relate the OPM threat intelligence to your fictitious organization. How likely is it that a similar attack will occur at your organization?
(cite reference)
Scope
Describe the scope of the assessment
Methodology
(cite references)
o
Use a suite of security tools, techniques, and procedures that can be used to assess the security posture of your organization's network in a SAR.
o
identify the security issues in your fictitious organization's networks. You have already used password cracking tools to crack weak and vulnerable passwords.
o
Provide an analysis of the strength of passwords used by the employees in your organization. Are weak passwords a security i ...
Case Project 1-1 Defining and Designing a NetworkThe overview.docxtidwellveronique
Case Project 1-1: Defining and Designing a Network
The overview of this book’s running case project is in the front matter. Please review this information carefully to guide you in completing each chapter’s project as you work through the remaining chapters.
You have been hired as a consultant to design a network for LedGrafix, a video and PC game design company. LedGrafix’s newest game has become a hot seller, and the company anticipates rapid growth. It’s moving into a new facility and will be installing a new network. Because competition is fierce in the game industry, LedGrafix wants the network fully secured, documented, and maintained while providing high availability, scalability, and performance.
Based on your current network technology and information security knowledge, for this project you design a network to meet the specified requirements and create a network diagram detailing your design. After you have created the diagram, you create a hardware and software inventory for the network. In addition to designing the network, you must also provide full documentation. The network should meet the following requirements:
· One location in Phoenix, AZ
· Capable of supporting 62 users in these departments: Accounting and Payroll, 4; Research and Development, 12; Sales and Marketing, 10; Order Processing, Shipping, and Receiving, 14; secretarial and office management staff, 4; upper management (including the president, vice president, and general manager), 10; Customer Relations and Support, 6;Technology Support, 2.
· Full T-1 Internet connection
Tasks
1. Design a network that meets the preceding requirements.
2. Examine the facility diagram your instructor provides. Using whatever drawing application you have available (MS Paint will work, if you have no other options), create a diagram of your network, showing the physical layout of the system.
3. Create a hardware and software inventory. Your instructor has blank forms you can use, or you can create or find your own. Your inventory should include at least the following:
· Operating systems
· Server operating systems
· Office applications
· Antivirus software
· Computers, servers, and peripherals
· Network connectivity equipment, such as hubs, switches, or routers
· Specialized imaging or multimedia devices or software
· Developer tools (you can make up tool names, if necessary)
· Other applications you think are necessary
Case Project 2-1: Conducting Risk Assessment and Analysis
Risk assessment can be as simple as noting an unlocked door or a password written on a note, or it can be a complex process requiring several team members and months to complete. A large enterprise environment probably has multiple locations, diverse activities, and a wide array of resources to evaluate. You don’t need such a complex network, however, for your running case project; the main idea is to learn how to apply your knowledge in a methodical fashion to produce useful and accurate data. Approaching ...
KEEP ALL SECTION AND SUB-SECTION HEADERS AND NUMBERING AS ISTatianaMajor22
KEEP ALL SECTION AND SUB-SECTION HEADERS AND NUMBERING AS IS
Mobile Application Threat Model Report
[name]
[date]
1.0 INTRODUCTION
Inject yourself into the given scenario and respond as the cyber threat analyst at a company wants to implement an initial specific mobile application. Provide an introduction to your company and work on providing mobile application security advice specific for this application to senior management. The advice might also apply to future mobile applications, but advice only relating to your specific first mobile application should be covered. What assumptions are you making? What is included and what is not included?
2.0 PURPOSE
Describe the purpose of your work as it relates to senior management making a decision to follow your recommendations and proceed with this mobile applications technology. What issue(s) is(are) being addressed? What aspects of security are key for the mobile application? Are there any specific laws, regulations, industry norms, etc. that must be followed? Reference and explain them.
3.0 MOBILE APPLICATION ARCHITECTURE
Integrate the Step1 description of the mobile application architecture in the scenario. Identify, describe and explain areas such as
· The purpose and intent of the specific first mobile application.
· Who and/or what systems are users of this application.
· An architecture diagram for your application should be provided and explained.
· A network diagram(s), including the related system(s) and end devices should be included and explained. Be sure to describe key aspects of the network, systems and devices, as related to this specific mobile application scenario only. Refer to and explain key elements, key OSs and key technologies in your diagram(s).
· My preference would be for you to focus most on the mobile architecture and less so on the networking. However, note that the traffic record analyses in the lab will give you guidance for the application architecture network protocols. So, you will be “forced” to consider the type of networking to be used.
· Provide one or two Use Case Scenarios and trace these scenarios in the architecture/network diagram(s) or any additional diagrams. Use Cases are a collection of separate statements of how the, in this case, mobile application would work in different situations (e.g., banking use cases, not necessarily, mobile application oriented, might be depositing a check to your savings account, transferring money from your savings account to your checking account, applying for a loan, etc.). Tracing involves showing the exact steps involved from beginning to end in the specific use case. If you cover one (two) use case(s), you would have one (two) unique and separate tracings (i.e., one (two) different diagrams).
· Identify the specific areas for security concern.
4.0 SECURITY REQUIREMENTS
Integrate the Step 2 requirements for this mobile application. Starting with a high-level statement of the security requ ...
Web Application Penetration Tests - ReportingNetsparker
These slides look into what is most probably the most overlooked stage of the website security assessment; reporting. The reporting stage is the ultimate deliverable from your security engagement.
risk-based approach of managing information systems is a holistic.docxodiliagilby
risk-based approach of managing information systems is a holistic activity that should be fully integrated into every aspect of the organization, from planning and system development lifecycle processes to security controls allocation and continuous monitoring. The selection and specification of security controls support effectiveness, efficiency, and constraints via appropriate laws, directives, policies, standards, and regulations.
The NIST Special Publication 800-37: Guide for Applying the Risk Management Framework to Federal Information Systems provides a disciplined and structured process that integrates information security and risk management activities into the development lifecycle by identifying the following six steps:
• Step 1 – Use an impact analysis to categorize the system and the information it processes, stores, and transmits.
• Step 2 – Select the set of initial or baseline security controls for the system based on the security categorization. Tailor and supplement the set of baseline security controls according to the organizational assessment of the risk and the conditions of the operational environment. Develop a strategy for continuous monitoring to achieve security control effectiveness. Document all the controls in the security plan. Review and approve the security plan.
• Step 3 – Implement the security controls and describe how the security controls are employed within the system and its environment of operation.
• Step 4 – Assess the security controls using the appropriate procedures as documented in the assessment plan. This assessment determines whether the security controls have been implemented correctly and will effectively produce the intended outcome.
• Step 5 – Authorize information system operation if the estimated risk resulting from the operation is acceptable. The assessment considers risk to organizational assets and operations (including mission, functions, image, or reputation), individuals, and other organizations.
• Step 6 – Monitor the security controls on an ongoing basis. Monitoring includes assessing control effectiveness, documenting changes to the system or its environment of operation, conducting security impact analyses of these changes, and reporting the security state of the system to designated officials.
While the risk management framework is adaptable to most scenarios, it defaults to the traditional IT environment and requires customization to successfully address the unique characteristics of cloud-based services and solutions. The CRMF closely follows the original RMF approach. Table E.1 shows the aforementioned six steps listed in the right column, with each step grouped into one of the three main activities in the left column that collectively comprise the risk management process:
Table E.1 The six steps are mapped to each of the three activities comprising the CRMF.
Adopting the approach outlined by these steps enables organizations to systematically identify their common, hybrid ...
You need to analyze the features of three videoconferencing systems walthamcoretta
You need to analyze the features of three videoconferencing systems and provide an overview of each system. After you complete the overview of the systems, you'll recommend a system which best meets the business functionality and security requirements. You will also prepare a set of high level executive briefing slides to give the CEO and CIO an overview of your study. Your study and recommendation will be critical to the company's success.
Cybersecurity professionals are frequently required to assess the security, risk applications, and systems for business communications before they can be added to an organization's network. CISOs need to assess risks posed to the organization and develop new security measures or adjust current measures to address these risks appropriately. These evaluations involve comparing competing applications or systems against the organization's baseline to determine the best balance between business needs and the security and risk appetite of the organization.
Videoconferencing and collaboration systems vary in cost, configuration, functionality, use, and collaboration capability. These systems are trusted to facilitate sensitive and proprietary discussions through their use of encrypted communication channels. Yet these systems have vulnerabilities and are prone to threats and attacks ranging from phishing, credential compromise, and even malware insertion. Therefore, analysis of possible threats, attacks, and vulnerabilities inherent in these systems is critical in developing defense and protection strategies for voice and video data at all endpoints and during transit.
In this project, you will create a proposal for a secure videoconferencing system, which will include an executive summary, briefing/slide presentation, and lab report. The details can be found in the final step of the project.
There are six steps to the project, and the project as a whole should take about two weeks to complete. Begin with the workplace scenario and then continue to Step 1.
Deliverables
Proposal for Secure Videoconferencing, Slides to Support Executive Briefing, Lab Report
Step 1: Develop Functional Requirements for Videoconferencing
The first step in your proposal for a secure videoconferencing system is to develop a set of functional requirements for videoconferencing that you believe the media company will need based on its geographic dispersion and business needs.
In developing those requirements, research three videoconferencing solutions such as Skype, GotoMeeting, Polycom, and Cisco Webex and explain their capabilities, advantages, and disadvantages. Identify costs as well as implementation and support requirements.
The functional requirements and the three possible solutions will be a section of your Proposal for Secure Videoconferencing. In the next step, you will review the challenges of implementing those solutions.
Step 2: Discuss Implementation Challenges
In the previous step, you outlined the requirements ...
Key AssignmentThe management team as well as your peers are happy .docxsleeperfindley
Key Assignment
The management team as well as your peers are happy with the work performed to this point:
Setting up Intrusion Detection Systems and audit data.
Defining and understanding vulnerabilities
Identifying various attack mechanisms
Creating a policy
The last and final step is to perform a vulnerability assessment against a workstation, server or combination and analyze the findings. Recommend the solutions to remediate any serious issues based on the established company policies.
It is important to know and understand the security posture of the devices attached to the network, as these might often be a step in a more sophisticated and multilevel attack of the infrastructure. An important step in the risk management process is to determine what vulnerabilities exist on these devices. Choose a vulnerability assessment tool and perform a vulnerability assessment against your target(s) in your environment, and report the findings. The information should include:
A description about the tool used to perform the scan.
A list of identified hosts (Obfuscate any specific IP addresses).
The list of serious (on a scale of 1-5 (1 being the highest) report the 1 and 2 issues)
Describe or list any false positive information.
Discuss potential safeguards and remediation actions that could be implemented for each finding to reduce the risk.
At this point the Key Assignment Template is Complete. The following Sections should be completed, and ensure to incorporate any feedback previously received from the instructor and peer reviews:
Title Page
Table of Contents (Updated to reflect correct page numbers)
Intrusion Tools and Techniques
Common Vulnerabilities and Exposures
Attack Methods
Intrusion Detection System Policies
Protective Measures
References
Add the discussion about the scan, the analysis and results and the remediation suggestions to the section titled:
Protective Measures.
.
Similar to Cst 630Education Specialist / snaptutorial.com (20)
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
1. CST 630 Project 1Risk, Threat, and
Vulnerability Management
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis
baseline of the IT systems, which will include a data-flow diagram of
connections and endpoints, and all types of access points, including
wireless. The baseline report will be part of the overall security
assessment report (SAR).
You will get your information from a data-flow diagram and report from
the Microsoft Threat Modeling Tool 2016. The scope should include
network IT security for the whole organization. Click the following to
view the data-flow diagram: [diagram and report]
Include the following areas in this portion of the SAR:
a. Security requirements and goals for the preliminary security
baseline activity.
b. Typical attacks to enterprise networks and their descriptions.
Include Trojans, viruses, worms, denial of service, session
hijacking, and social engineering. Include the impacts these attacks
have on an organization.
c. Network infrastructure and diagram, including configuration and
connections. Describe the security posture with respect to these
components and the security employed: LAN, MAN, WAN,
enterprise. Use these questions to guide you:
2. a. What are the security risks and concerns?
b. What are ways to get real-time understanding of the security
posture at any time?
c. How regularly should the security of the enterprise network
be tested, and what type of tests should be used?
d. What are the processes in play, or to be established to
respond to an incident?
e. Workforce skill is a critical success factor in any security
program, and any security assessment must also review this
component. Lack of a skilled workforce could also be a
security vulnerability. Does the security workforce have the
requisite technical skills and command of the necessary
toolsets to do the job required?
f. Is there an adequate professional development roadmap in
place to maintain and/or improve the skill set as needed?
g. Describe the ways to detect these malicious code and what
tactics bad actors use for evading detection.
d. Public and private access areas, web access points. Include in the
network diagram the delineation of open and closed networks,
where they co-exist. In the open network and closed
network portion, show the connections to the Internet.
e. Physical hardware components. Include routers and switches.
What security weaknesses or vulnerabilities are within these
devices?
f. Operating systems, servers, network management systems.
a. data in transit vulnerabilities
1. endpoint access vulnerabilities
2. external storage vulnerabilities
3. virtual private network vulnerabilities
4. media access control vulnerabilities
5. ethernet vulnerabilities
Possible applications. This network will incorporate a BYOD
(bring your own device) policy in the near future. The IT auditing team
and leadership need to understand current mobile applications and
3. possible future applications and other wireless integrations. You will use
some of this information in Project 2 and also in Project 5.
The overall SAR should detail the security measures needed, or
implementations status of those in progress, to address the identified
vulnerabilities. Include:
a. remediation
b. mitigation
c. countermeasure
d. recovery
Through your research, provide the methods used to provide the
protections and defenses.
From the identification of risk factors in the risk model, identify the
appropriate security controls from NIST SP 800-53A and determine
their applicability to the risks identified.
The baseline should make up at least three of the 12 pages of the overall
report.
When you have completed your security analysis baseline, move on to
the next step, in which you will use testing procedures that will help
determine the company's overall network defense strategy.
Step 2: Determine a Network Defense Strategy
You've completed your initial assessment of the company's security with
your baseline analysis. Now it's time to determine the best defenses for
your network.
Start by reading a publication by the National Institute of Standards and
Technology, NIST-SP-800-115 Technical Guide to Information Security
Testing and Assessment, and outline how you would test violations.
Identify how you will assess the effectiveness of these controls and write
test procedures that could be used to test for effectiveness. Write them in
a manner to allow a future information systems security officer to use
them in preparing for an IT security audit or IT certification and
accreditation. Within this portion of the SAR, explain the different
testing types (black box testing, white box testing).
4. Include these test plans in the SAR. The strategy should take up at least
two of the 12 pages of the overall report.
Click the following link to learn more about cybersecurity for process
control systems: Cybersecurity for Process Control Systems
After you've completed this step, it's time to define the process of
penetration testing. In the next step, you'll develop rules of engagement
(ROE).
Step 3: Plan the Penetration Testing Engagement
Now that you've completed your test plans, it's time to define
your penetration testing process. Include all involved processes, people,
and timeframe. Develop a letter of intent to the organization, and within
the letter, include some formal rules of engagement (ROE). The process
and any documents can be notional or can refer to actual use cases. If
actual use cases are included, cite them using APA format.
This portion should be about two pages of the overall 12-page report.
After you have outlined the steps of a penetration testing process, in the
next step you will perform penetration testing. During the testing, you
will determine if the security components are updated and if the latest
patches are implemented, and if not, determine where the security gaps
are.
Step 4: Conduct a Network Penetration Test
You've defined the penetration testing process, and in this step, you will
scan the network for vulnerabilities. Though you have some preliminary
information about the network, you will perform a black box test to
assess the current security posture. Black box testing is performed with
little or no information about the network and organization.
To complete this step, you will use industry tools to carry out simulated
attacks to test the weaknesses of the network. You will do this within
your lab Workspace. The workspace instructions will provide many of
the details, but in the simulation, you will launch a sandbox type of
virtual machine (VM), report your findings and actual screen captures of
5. the behaviors you see as a result of the tests, and include these in the
SAR.
Your assessments within the lab will be reported in the SAR.
Note: You will use the tools in Workspace for this step. If you need help
outside the classroom, you can register for the CLAB 699 Cyber
Computing Lab Assistance (go to the Discussions List for registration
information). Lab assistants are available to help.
Click here to access the instructions for Navigating the Workspace and
the Lab Setup.
Click here to access the Project 1 Workspace Exercise Instructions.
Explore the tutorials and user guides to learn more about the tools you
will use. Then, enter Workspace.
After finding the security issues within the network, define which
control families from the NIST 800-53 are violated by these issues.
Explain in the SAR why each is a violation, support your arguments
with a copy of your evidence, and then provide suggestions on
improving the security posture of these violations.
This section should make up at least four of the 12 pages in the overall
report.
After you've completed the penetration testing, move to the next step,
where you will compile a risk management cost benefit analysis.
Step 5: Complete a Risk Management Cost Benefit Analysis
You've completed the penetration testing, and now it's time to complete
your SAR with a risk management cost benefit analysis. Within this
analysis, think about the cost of violations and other areas if you do not
add the controls. Then add in the cost for implementing your controls.
When you have finished with the cost benefit analysis, which should be
at least one page of your overall report, move to the final step, which is
the completed SAR. As part of the final assignment, remember that you
will need to create a slide presentation as part of the executive briefing,
and submit that along with the SAR.
6. Step 6: Compile the SAR, Executive Briefing, and Lab Report
You have completed comprehensive testing in preparation for this audit,
provided recommended remediation, and developed a set of
recommendations. Now you are ready to submit your SAR and
executive briefing.
The requirements for Project 1 are as follows:
1. Executive briefing: A three- to five-slide visual presentation for
business executives and board members.
2. Security assessment report (SAR): Your report should be 12 pages
minimum, double-spaced with citations in APA format. The page
count does not include figures, diagrams, tables or citations.
3. Lab report: A document sharing your lab experience and providing
screenshots to demonstrate that you performed the lab. Attach it to
the SAR as an artifact.
Submit all three components to the assignment folder.
********************************
CST 630 Project 2 Incident Response
For more classes visit
www.snaptutorial.com
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device
(BYOD) policy, security attitudes have been lax and all sorts of devices,
authorized and unauthorized, have been found connected to the
7. company's wireless infrastructure. In this first step, you will develop a
wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks
(WLANs) Special Publication 800-153 to provide an executive summary
to answer other security concerns related to BYOD and wireless. Within
your cybersecurity incident report, provide answers to the threat of
unauthorized equipment or rogue access points on the company wireless
network and the methods to find other rogue access points. Describe
how to detect rogue access points and how they can actually connect to
the network. Describe how to identify authorized access points within
your network.
Within your plan, include how the Cyber Kill Chain framework and
approach could be used to improve the incident response times for
networks.
Include this at the beginning of your CIR as the basis for all wireless-
and BYOD-related problems within the network. Title the section
"Wireless and BYOD Security Plan."
Click the following link to learn more about security
management: Security Management.
In the next step, you will explore a scenario on suspicious behavior, and
your report will provide another section of your CIR.
Step 2: Track Suspicious Behavior
You've completed your wireless and BYOD security plan. Now it's time
to take a look at another workplace situation.
You have been notified of an employee exhibiting suspicious behavior.
You decide to track the employee's movements by using various tools
and techniques. You know the location and time stamps associated with
the employee's mobile device.
How would you track the location of the company asset?
Explain how identity theft could occur and how MAC spoofing could
take place in the workplace. How would you protect against both
identity theft and MAC spoofing? Address if it is feasible to determine if
MAC spoofing and identity theft has taken place in the workplace.
8. Include a whitelist of approved devices for this network. Examples may
include authorized access points, firewalls, and other similar devices.
Are there any legal issues, problems, or concerns with your actions?
What should be conducted before starting this investigation? Were your
actions authorized, was the notification valid, or are there any other
concerns? Include your responses as part of the CIR with the title
"Tracking Suspicious Behavior."
In the next step, you will explore another workplace scenario, and your
responses will help you formulate a continuous improvement plan,
which will become another part of your CIR.
Step 3: Develop a Continuous Improvement Plan
Now that you've completed the section on tracking suspicious behavior
for your CIR, you are confronted with another situation in the
workplace.
You receive a memo for continuous improvement in the wireless
network of your company, and you are asked to provide a report on the
wireless network used in your company. You have been monitoring the
activities on the WPA2. Provide for your leadership a description
of wired equivalent privacy and also Wi-Fi protected access networks,
for education purposes. Include the pros and cons of each type of
wireless network, as well as WPA2.
Since WPA2 uses encryption to provide secure communications, define
the scheme for using preshared keys for encryption. Is this FIPS 140-
2 compliant, and if not, what is necessary to attain this? Include this for
leadership. Include a list of other wireless protocols, such as Bluetooth,
and provide a comparative analysis of four protocols including the pros,
cons, and suitability for your company.
Include your responses as part of the CIR with the title "Continuous
Improvement Plan."
In the next step, you will look at yet another workplace scenario, and
you will use that incident to show management how remote
configuration management works.
9. Step 4: Develop Remote Configuration Management
You've completed the continuous improvement plan portion of the CIR.
Now, it's time to show how your company has implemented remote
configuration management.
Start your incident report with a description of remote configuration
management and how it is used in maintaining the security posture of
your company's network. Then, consider the following scenario:
An undocumented device is found on the company network. You have
determined that the owner of the device should be removed from the
network. Implement this and explain how you would remove the
employee's device. How would you show proof that the device was
removed?
Include your responses as part of the CIR with the title "Remote
Configuration Management."
In the next step, you will illustrate how you investigate possible
employee misconduct.
Step 5: Investigate Employee Misconduct
In this portion of your CIR report, you will show how you would
investigate possible employee misconduct. You have been given a report
that an employee has recorded logins during unofficial duty hours. The
employee has set up access through an ad-hoc wireless network. Provide
a definition of ad hoc wireless networks and identify the threats and
vulnerabilities to a company. How could this network contribute to the
company infrastructure and how would you protect against those
threats? Use notional information or actual case data and discuss.
Address self-configuring dynamic networks on open access architecture
and the threats and vulnerabilities associated with them, as well as the
possible protections that should be implemented. From your position as
an incident manager, how would you detect an employee connecting to a
self-configuring network or an ad hoc network? Provide this information
in the report. How would signal hiding be a countermeasure for wireless
networks? What are the countermeasures for signal hiding? How is the
10. service set identifier (SSID) used by cybersecurity professionals on
wireless networks? Are these always broadcast, and if not, why not?
How would you validate that the user is working outside of business
hours?
Include your responses as part of the CIR with the title "Employee
Misconduct."
In the next step, you will use lab tools to analyze wireless traffic.
Step 6: Analyze Wireless Traffic
You've completed several steps that you will use to present your CIR. In
this step, as part of a virtual lab, you will analyze wireless traffic.
You are given access to precaptured files of wireless traffic on the
company network. This is another way to monitor employee behavior
and detect any malicious behavior, intentional or even unintentional.
Note: You will use the tools in Workspace for this step. If you need help
outside the classroom, you can register for the CLAB 699 Cyber
Computing Lab Assistance (go to the Discussions List for registration
information). Lab assistants are available to help.
Click here to access the instructions for Navigating the Workspace and
the Lab Setup.
Click here to access the Project 2 Workspace Exercise Instructions.
Explore the tutorials and user guides to learn more about the tools you
will use. Then, enter Workspace.
Include your responses from the lab as part of the CIR with the title
"Wireless Traffic Analysis."
Step 7: Prepare the Cybersecurity Incident Report, Executive Briefing,
and Executive Summary
You've completed all of the individual steps for your cybersecurity
incident report. It's time to combine the reports you completed in the
previous steps into a single CIR.
The assignments for this project are as follows:
11. 1. Executive briefing: This is a three- to five-slide visual presentation
for business executives and board members.
2. Executive summary: This is a one-page summary at the beginning
of your CIR.
3. Cybersecurity Incident Report (CIR): Your report should be a
minimum 12-page double-spaced Word document with citations in
APA format. The page count does not include figures, diagrams,
tables or citations.
Submit all three documents to the assignment folder.
Deliverables: Cybersecurity Incident Report (CIR), Slides to Support
Executive Briefing
Learning Competencies: 5.1, 5.3, 5.5., 5.6, 5.7, 5.9
********************************
CST 630 Project 3 Enterprise Network Security
For more classes visit
www.snaptutorial.com
Project 3
Step 1: Conduct a Policy Gap Analysis
As you begin Step 1 of your system security report on cybersecurity for
mergers and acquisitions, keep in mind that the networks of companies
going through an M&A can be subject to cyberattack. As you work
through this step and the others, keep these questions in mind:
Are companies going through an M&A prone to more attacks or
more focused attacks?
12. If so, what is the appropriate course of action?
Should the M&A activities be kept confidential?
Now, look at the existing security policies in regard to the acquisition of
the media streaming company. You have to explain to the executives
that before any systems are integrated, their security policies will need to
be reviewed.
Conduct a policy gap analysis to ensure the target company's security
policies follow relevant industry standards as well as local, state, and
national laws and regulations. In other words, you need to make sure the
new company will not inherit any statutory or regulatory noncompliance
from either of the two original companies. This step would also identify
what, if any, laws and regulations the target company is subject to. If
those are different from the laws and regulations the acquiring company
is subject to, then this document should answer the following questions:
How would you identify the differences?
How would you learn about the relevant laws and regulations?
How would you ensure compliance with those laws and
regulations?
The streaming company that is being acquired has a current customer
base of 150,000 users, who on average pay $14.99 in monthly fees.
Based on the overall income, use PCI Standards DSS 12 requirements,
and the PCI DSS Quick Reference Guide to identify a secure strategy,
and operating system protections to protect the credit card data.
Select at least two appropriate requirements from the PCI Standards
DSS 12 set of requirements and explain how the controls should be
implemented, how they will change the current network, and any costs
associated with implementing the change.
In the next step, you will review the streaming protocols that the
companies are using.
Step 2: Review Protocols for Streaming Services
After reviewing the policies from the company and the policy gap
analysis, the M&A leader asks you about the protocols used by the
streaming company. He wants to know if the protocols used would
13. affect the current state of cybersecurity within the current company
environment. For this section, review the protocols, explain how they
work along with any known vulnerabilities, and how to secure the
company from cyberattacks. Start with researching the commonly
known streaming protocols and the vulnerabilities of those protocols.
Some examples are the Real-Time Streaming Protocol (RTSP), Real-
Time Transport Protocol (RTP) and the Real-Time Transport Control
Protocol (RTCP).
Additionally, the leadership wants to know if any vulnerabilities
identified would or could lead to a no-go on the M&A.
In other words:
1. You need to identify what streaming the companies are doing and
the specific technology they are leveraging.
2. What are the technical vulnerabilities associated with the protocols
involved?
3. Have those been mitigated? And to what extent (i.e., has the risk
been reduced to zero, reduced somewhat, shifted to a third party,
etc.)?
4. What residual risk to the target company's assets and IP remain?
5. Would those risks extend to the current (takeover) company after
the merger?
a. Would that be bad enough to cancel the M&A?
6. If the response to #5 is yes, then, what should the target company
do to further mitigate the risk? How should the takeover company
mitigate the risk?
7. What are the costs associated to the target company (implementing
the appropriate mitigation)? If the takeover firm has to take
additional measures, identify those costs as well.
After assessing and reviewing the streaming protocols, move to the next
step, where you will assess the infrastructure of the merged network.
Step 3: Assess the Merged Network Infrastructure
You’ve just reviewed the streaming services of the companies, and now
you will assess the infrastructure of the new network. The networks of
14. the two companies could be configured differently, or they could use the
same hardware and software, or completely different hardware and
software.
The purpose of this section is to understand what tools the company is
using, the benefits and shortcomings of those tools, and the gaps within
the network. Explain what tactics, techniques, and procedures you would
use to understand the network. You should identify firewalls, DMZ(s),
other network systems, and the status of those devices.
When your assessment of the infrastructure is complete, move to the
next step, where you will assess any existing policies for wireless and
bring your own device (BYOD) within the companies.
Step 4: Review the Wireless and BYOD Policies
Within Project 2, you learned about and discussed wireless networks. An
M&A provides an opportunity for both companies to review their
wireless networks. Within your report, explain the media company's
current stance on wireless devices and BYOD. However, the company
that is being acquired does not have a BYOD policy. Explain to the
managers of the acquisition what needs to be done for the new company
to meet the goals of the BYOD policy.
When the review of the wireless and BYOD policies is complete, move
to the next step: developing a data protection plan.
Step 5: Develop a Data Protection Plan
You’ve completed the review of the wireless and BYOD policies. In this
step, you will develop the recommendations portion of your report in
which you will suggest additional mechanisms for data protection at
different levels of the acquired company’s architecture.
Include the benefits, implementation activities required for protection
and defense measures such as full disk encryption, BitLocker,
and platform identity keys. You also want to convey to your leadership
the importance of system integrity and an overall trusted computing
base, environment, and support. Describe what this would entail and
15. include Trusted Platform Module (TPM) components and drivers. How
are these mechanisms employed in an authentication and authorization
system? Include this in the report and whether the merging company has
this.
In the next step, you will assess any risks with the supply chain of the
acquired company.
Step 6: Review Supply Chain Risk
The data protection plan is ready. In this step, you will take a look at
risks to the supply chain. Acquiring a new company also means
inheriting the risks associated with its supply chain and those firm's
systems and technologies. Include supply chain risks and list the security
measures in place to mitigate those risks. Use the NIST Special
Publication 800-161 Supply Chain Risk Management Practices for
Federal Information Systems and Organizations to explain the areas that
need to be addressed.
After your supply chain review is complete, move to the next step,
where you will create a vulnerability management program.
Step 7: Build a Vulnerability Management Program
After your supply chain review, you conduct an interview with the
company's current cybersecurity team about vulnerability management.
The team members explain to you that they never scanned or had the
time to build a vulnerability management program. So, you need to build
one. Use NIST Special Publication 800-40 Guide to Enterprise Patch
Management Technologies to develop a program to meet the missing
need.
Explain to the managers how to implement this change, why it is
needed, and any costs involved.
The next step is a key one that should not be overlooked -- the need to
educate users from both companies of the changes being made
16. Step 8: Educate Users
You’ve completed your vulnerability management program, but it’s
important to educate all the users of the network about the changes.
During the process of acquiring a company, policies, processes, and
other aspects are often updated. The last step in the process is to inform
the users for the new and old company of the changes. Within your
report, explain to the acquisition managers the requirements for training
the workforce.
When you’ve completed this step, move to the final section of this
project, in which you will prepare and submit your final report.
Step 9: Prepare and Submit Your Report, Executive Briefing, and
Executive Summary
You’re ready now for the final step, in which you will compile and
deliver the Cybersecurity for a Successful Acquisition report for the
company leaders to enable them to understand the required cybersecurity
strategy.
Again, keep in mind that companies undergoing an acquisition or merger
are more prone to cyberattacks. The purpose of this paper is to analyze
the security posture of both companies and to develop a plan to reduce
the possibility of an attack.
The assignments for this project are as follows:
1. Executive briefing: This is a three- to five-slide visual presentation
for business executives and board members.
2. Executive summary: This is a one-page summary at the beginning
of your report.
3. Cybersecurity System Security Report for Successful Acquisition:
Your report should be a minimum 12-page double-spaced Word
document with citations in APA format. The page count does not
include figures, diagrams, tables or citations.
Submit all three components to the assignment folder.
Deliverables: Cybersecurity for a Successful Acquisition, Slides to
Support Executive Briefing
********************************
17. CST 630 Project 4Secure Videoconferencing
Communications
For more classes visit
www.snaptutorial.com
Project 4
Step 1: Develop Functional Requirements for Videoconferencing
The first step in your proposal for a secure videoconferencing system is
to develop a set of functional requirements for videoconferencing that
you believe the media company will nee based on its geographic
dispersion and business needs.
In developing those requirements, research three videoconferencing
solutions such as Skype, GotoMeeting, Polycom, and Cisco Webex and
explain their capabilities, advantages, and disadvantages. Identify costs
as well as implementation and support requirements.
The functional requirements and the three possible solutions will be a
section of your Proposal for Secure Videoconferencing. In the next step,
you will review the challenges of implementing those solutions.
Step 2: Discuss Implementation Challenges
In the previous step, you outlined the requirements for secure
videoconferencing for the company and outlined three potential
solutions. Part of your final proposal should also include the advantages
and disadvantages of the implementation options for the three systems
you selected. This section of the proposal also must include the changes
the media company will need to make to implement the systems.
18. Additionally, explain how system administration or privileged identity
management will operate with these systems. You will also need to
examine how data exfiltration will occur with each of the new systems.
The changes to the systems and challenges for the implementation of
these potential solutions will be an important section of your Proposal
for Secure Videoconferencing. In the next step, you will take a closer
look at the track records of each of the potential videoconferencing
vendors.
Step 3: Identify Vendor Risks
You've finished outlining the pros and cons of three videoconferencing
systems. Now, it'S time to take a close look at how they serve their
clients. This will take some research. Look at the systems' known
vulnerabilities and exploits. Examine and explain the past history of
each vendor with normal notification timelines, release of patches, or
work-arounds (solutions within the system without using a patch). Your
goal is to know the timeliness of response with each company in helping
customers stay secure.
This step will be a section of your Proposal for Secure
Videoconferencing.
In the next step, you will outline best practices for secure
videoconferencing that will be part of your overall proposal to
management
Step 4: Develop Best Practices for Secure Videoconferencing
The last few steps have been devoted to analyzing potential
videoconferencing solutions. But obtaining a trusted vendor is just part
of the security efforts. Another important step is to ensure that users and
system administrators conduct the company's videoconferencing in a
secure manner. In this step, outline security best practices for
videoconferencing that you would like users and systems administrators
to follow. Discuss how these best practices will improve security and
minimize risks of data exfiltration as well as snooping.
19. This "best practices" section will be part of the overall Proposal for
Secure Videoconferencing.
In the next step, you will develop system integrity checks within a
virtual lab environment.
Step 5: Develop System Integrity Checks
As part of the overall proposal, the CISO has asked you to develop
system integrity checks for files shared between users of the
videoconferencing systems. These checks will ensure file protection and
prevent exfiltration of sensitive files.
The lab exercise will show how this is done. In this step, you will
generate a lab report that will be part of your final assignment. The lab
instructions will tell you what the report needs to contain.
Note:
You will use the tools in Workspace for this step. If you need help
outside the classroom, you can register for the CLAB 699 Cyber
Computing Lab Assistance (go to the Discussions List for registration
information). Lab assistants are available to help.
Click here to access the instructions for Navigating the Workspace and
the lab Setup.
Click here to access the Project Workspace Exercise Instructions.
Explore the tutorials and user guides to learn more about the tools you
will use. Then, enter Workspace (http://virtualdesktop.umuc.edu/).
This will be a section of your Proposal for Secure Videoconferencing.
Now, you are ready for the final step, which will be to put all of the
components of the proposal together for management. Remember, your
task is to recommend the best videoconferencing system for the
company. Part of that proposal includes a set of high-level executive
briefing slides.
Step 6: Submit Your Proposal for Secure Videoconferencing and
All Related Materials
20. It’s time to prepare your materials on secure videoconferencing for
management. Your task is to recommend a system that best meets the
business functionality and security requirements of the company. As part
of that recommendation, you will also prepare a set of high-level
executive briefing slides to give the CEO and CIO an overview of your
study.
The assignments for this project are as follows:
1. Executive briefing: This is a three- to five-slide visual presentation
for business executives and board members.
2. Executive summary: This is a one-page summary at the beginning
of your Proposal for Secure Videoconferencing.
3. Proposal for Secure Videoconferencing: Your report should be a
minimum six-page double- spaced Word document with citations
in APA format. The page count does not include figures, diagrams,
tables or citations.
4. Lab report: Generated from Workspace.
Submit all four components to the assignment folder.
********************************
CST 630 Project 5 Data Loss Prevention (21
Pages + 10 slides + lab report)
For more classes visit
www.snaptutorial.com
CST 630 Project 5 Data Loss Prevention (21 Pages + 10 slides + lab
report)