You need to analyze the features of three videoconferencing systems and provide an overview of each system. After you complete the overview of the systems, you'll recommend a system which best meets the business functionality and security requirements. You will also prepare a set of high level executive briefing slides to give the CEO and CIO an overview of your study. Your study and recommendation will be critical to the company's success.
Cybersecurity professionals are frequently required to assess the security, risk applications, and systems for business communications before they can be added to an organization's network. CISOs need to assess risks posed to the organization and develop new security measures or adjust current measures to address these risks appropriately. These evaluations involve comparing competing applications or systems against the organization's baseline to determine the best balance between business needs and the security and risk appetite of the organization.
Videoconferencing and collaboration systems vary in cost, configuration, functionality, use, and collaboration capability. These systems are trusted to facilitate sensitive and proprietary discussions through their use of encrypted communication channels. Yet these systems have vulnerabilities and are prone to threats and attacks ranging from phishing, credential compromise, and even malware insertion. Therefore, analysis of possible threats, attacks, and vulnerabilities inherent in these systems is critical in developing defense and protection strategies for voice and video data at all endpoints and during transit.
In this project, you will create a proposal for a secure videoconferencing system, which will include an executive summary, briefing/slide presentation, and lab report. The details can be found in the final step of the project.
There are six steps to the project, and the project as a whole should take about two weeks to complete. Begin with the workplace scenario and then continue to Step 1.
Deliverables
Proposal for Secure Videoconferencing, Slides to Support Executive Briefing, Lab Report
Step 1: Develop Functional Requirements for Videoconferencing
The first step in your proposal for a secure videoconferencing system is to develop a set of functional requirements for videoconferencing that you believe the media company will need based on its geographic dispersion and business needs.
In developing those requirements, research three videoconferencing solutions such as Skype, GotoMeeting, Polycom, and Cisco Webex and explain their capabilities, advantages, and disadvantages. Identify costs as well as implementation and support requirements.
The functional requirements and the three possible solutions will be a section of your Proposal for Secure Videoconferencing. In the next step, you will review the challenges of implementing those solutions.
Step 2: Discuss Implementation Challenges
In the previous step, you outlined the requirements ...
Businesses involved in mergers and acquisitions must exercise due di.docxdewhirstichabod
Businesses involved in mergers and acquisitions must exercise due diligence in ensuring that the technology environment of the future organization is robust and adequately protects their information assets and intellectual property.. Such an effort requires time and open sharing to understand the physical locations, computing environment, and any gaps to address. Lack of information sharing can lead to a problematic systems integration and hamper the building of a cohesive enterprise security posture for the merged organization.
Often the urgency of companies undergoing a merger and acquisition (M&A) impedes comprehensive due diligence, especially in cybersecurity. This creates greater challenges for the cybersecurity engineering architect, who typically leads the cybersecurity assessment effort and creates the roadmap for the new enterprise security solution for the future organization. However, the business interest and urgency in completing the merger can also represent an opportunity for CISOs to leverage additional resources and executive attention on strategic security matters.
In this project, you will create a report on system security issues during an M&A. The details of your report, which will also include an executive briefing and summary, can be found in the final step of the project.
There are nine steps to the project. The project as a whole should take two weeks to complete. Begin with the workplace scenario and then continue to Step 1.
Deliverable
Cybersecurity for a Successful Acquisition, Slides to Support Executive Briefing
Step 1: Conduct a Policy Gap Analysis
As you begin Step 1 of your system security report on cybersecurity for mergers and acquisitions, keep in mind that the networks of companies going through an M&A can be subject to cyberattack. As you work through this step and the others, keep these questions in mind:
Are companies going through an M&A prone to more attacks or more focused attacks?
If so, what is the appropriate course of action?
Should the M&A activities be kept confidential?
Now, look at the existing security policies in regard to the acquisition of the media streaming company. You have to explain to the executives that before any systems are integrated, their security policies will need to be reviewed.
Conduct a policy gap analysis to ensure the target company's security policies follow relevant industry standards as well as local, state, and national laws and regulations. In other words, you need to make sure the new company will not inherit any statutory or regulatory noncompliance from either of the two original companies. This step would also identify what, if any, laws and regulations the target company is subject to. If those are different from the laws and regulations the acquiring company is subject to, then this document should answer the following questions:
How would you identify the differences?
How would you learn about the relevant laws and regulations?
How would .
Many companies and agencies conduct IT audits to test and assess the.docxtienboileau
Many companies and agencies conduct IT audits to test and assess the rigor of IT security controls in order to mitigate risks to IT networks. Such audits meet compliance mandates by regulatory organizations. Federal IT systems follow Federal Information System Management Act (FISMA) guidelines and report security compliance to US-CERT, the United States Computer Emergency Readiness Team, which handles defense and response to cyberattacks as part of the Department of Homeland Security. In addition, the Control Objective for Information Technology (COBIT) is a set of IT security guidelines that provides a framework for IT security for IT systems in the commercial sector.
These audits are comprehensive and rigorous, and negative findings can lead to significant fines and other penalties. Therefore, industry and federal entities conduct internal self-audits in preparation for actual external IT audits, and compile security assessment reports.
In this project, you will develop a 12-page written
security assessment report
and
executive briefing (slide presentation)
for a company and submit the report to the leadership of that company.
There are six steps to complete the project. Most steps in this project should take no more than two hours to complete, and the project as a whole should take no more than three weeks to complete. Begin with the workplace scenario, and then continue to Step 1.
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram:
[diagram and report]
Include the following areas in this portion of the SAR:
Security requirements and goals for the preliminary security baseline activity.
Typical attacks to enterprise networks and their descriptions. Include Trojans, viruses, worms, denial of service, session hijacking, and social engineering. Include the impacts these attacks have on an organization.
Network infrastructure and diagram, including configuration and connections. Describe the security posture with respect to these components and the security employed: LAN, MAN, WAN, enterprise. Use these questions to guide you:
What are the security risks and concerns?
What are ways to get real-time understanding of the security posture at any time?
How regularly should the security of the enterprise network be tested, and what type of tests should be used?
What are the processes in play, or to be established to respond to an incident?
Workforce skill is a critical success factor in any.
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information
Businesses involved in mergers and acquisitions must exercise due di.docxdewhirstichabod
Businesses involved in mergers and acquisitions must exercise due diligence in ensuring that the technology environment of the future organization is robust and adequately protects their information assets and intellectual property.. Such an effort requires time and open sharing to understand the physical locations, computing environment, and any gaps to address. Lack of information sharing can lead to a problematic systems integration and hamper the building of a cohesive enterprise security posture for the merged organization.
Often the urgency of companies undergoing a merger and acquisition (M&A) impedes comprehensive due diligence, especially in cybersecurity. This creates greater challenges for the cybersecurity engineering architect, who typically leads the cybersecurity assessment effort and creates the roadmap for the new enterprise security solution for the future organization. However, the business interest and urgency in completing the merger can also represent an opportunity for CISOs to leverage additional resources and executive attention on strategic security matters.
In this project, you will create a report on system security issues during an M&A. The details of your report, which will also include an executive briefing and summary, can be found in the final step of the project.
There are nine steps to the project. The project as a whole should take two weeks to complete. Begin with the workplace scenario and then continue to Step 1.
Deliverable
Cybersecurity for a Successful Acquisition, Slides to Support Executive Briefing
Step 1: Conduct a Policy Gap Analysis
As you begin Step 1 of your system security report on cybersecurity for mergers and acquisitions, keep in mind that the networks of companies going through an M&A can be subject to cyberattack. As you work through this step and the others, keep these questions in mind:
Are companies going through an M&A prone to more attacks or more focused attacks?
If so, what is the appropriate course of action?
Should the M&A activities be kept confidential?
Now, look at the existing security policies in regard to the acquisition of the media streaming company. You have to explain to the executives that before any systems are integrated, their security policies will need to be reviewed.
Conduct a policy gap analysis to ensure the target company's security policies follow relevant industry standards as well as local, state, and national laws and regulations. In other words, you need to make sure the new company will not inherit any statutory or regulatory noncompliance from either of the two original companies. This step would also identify what, if any, laws and regulations the target company is subject to. If those are different from the laws and regulations the acquiring company is subject to, then this document should answer the following questions:
How would you identify the differences?
How would you learn about the relevant laws and regulations?
How would .
Many companies and agencies conduct IT audits to test and assess the.docxtienboileau
Many companies and agencies conduct IT audits to test and assess the rigor of IT security controls in order to mitigate risks to IT networks. Such audits meet compliance mandates by regulatory organizations. Federal IT systems follow Federal Information System Management Act (FISMA) guidelines and report security compliance to US-CERT, the United States Computer Emergency Readiness Team, which handles defense and response to cyberattacks as part of the Department of Homeland Security. In addition, the Control Objective for Information Technology (COBIT) is a set of IT security guidelines that provides a framework for IT security for IT systems in the commercial sector.
These audits are comprehensive and rigorous, and negative findings can lead to significant fines and other penalties. Therefore, industry and federal entities conduct internal self-audits in preparation for actual external IT audits, and compile security assessment reports.
In this project, you will develop a 12-page written
security assessment report
and
executive briefing (slide presentation)
for a company and submit the report to the leadership of that company.
There are six steps to complete the project. Most steps in this project should take no more than two hours to complete, and the project as a whole should take no more than three weeks to complete. Begin with the workplace scenario, and then continue to Step 1.
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram:
[diagram and report]
Include the following areas in this portion of the SAR:
Security requirements and goals for the preliminary security baseline activity.
Typical attacks to enterprise networks and their descriptions. Include Trojans, viruses, worms, denial of service, session hijacking, and social engineering. Include the impacts these attacks have on an organization.
Network infrastructure and diagram, including configuration and connections. Describe the security posture with respect to these components and the security employed: LAN, MAN, WAN, enterprise. Use these questions to guide you:
What are the security risks and concerns?
What are ways to get real-time understanding of the security posture at any time?
How regularly should the security of the enterprise network be tested, and what type of tests should be used?
What are the processes in play, or to be established to respond to an incident?
Workforce skill is a critical success factor in any.
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information
AppSec How-To: Achieving Security in DevOpsCheckmarx
How do you integrate security within a Continuous Deployment (CD) environment, where every 5 minutes a feature, an enhancement, or a bug fix needs to be released? Find out in this Checkmarx How-To Paper.
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool
For more course tutorials visit
www.tutorialrank.com
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
For more course tutorials visit
www.tutorialrank.com
CYB 610 Project 1 Information Systems and Identity Management
CYB 610 Project 2 Operating Systems Vulnerabilities (Windows and Linux)
CYB 610 Project 3 Assessing Information System Vulnerabilities and Risk
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more course tutorials visit
www.tutorialrank.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems
member is a security software architect in a cloud service provider .docxwkyra78
member is a security software architect in a cloud service provider company, assigned to a project to provide the client with data integrity and confidentiality protections for data in transit that will be using applications in the cloud. Your client is an HR company that is moving HR applications and HR data into a community cloud, sharing tenancy with other clients. Your company has set up a software as a service, SAS, offering for its client base.
The data that the HR company will be pushing to and from the cloud will contain sensitive employee information, such as personally identifiable information, PII. You will have to address sensitive data and transit issues of the client data using the HR applications stored in the cloud, and provide a life cycle management report that includes solutions to the cloud computing architect of your company.
Software Development Life Cycle
Technology development and implementation usually follow a software development life cycle (SDLC) methodology. This approach ensures accuracy of information for analysis and decision making, as well as appropriate resources for effective technology management.
You and your team members will use components of the SDLC methodology to develop a
life cycle management report
for the cloud computing architect of a company. This is a group exercise, representing the kind of collaboration often required in the cybersecurity technology community.
There are 11 steps to lead you through this project. Similar steps are typically used in organizational SDLC projects. Most steps should take no more than two hours to complete, and the entire project should take no more than three weeks to complete. Begin with the workplace scenario, and then continue with Step 1: “Initiating the Project.”
Life Cycle Management Report:
A 10- to 15-page double-spaced Word document on data protection techniques for a cloud-based service with citations in APA format. The page count does not include figures or tables. There is no penalty for using additional pages if you need them. Include a minimum of six references. Include a reference list with the report.
As the cloud security architect, you must understand the security development life cycle process. Review the following resources to learn about the security development life cycle process:
security development life cycle
software development methodologies
Click the following links to learn more about critical infrastructure sectors:
Critical Infrastructure Sectors
. Read their descriptions and consider which sector you support in your role.
Process Control Systems: Cybersecurity and Defense
To be completed by a designated team member:
You will begin your Life Cycle Management Report now.
Choose a fictional or actual organization. Describe the mission of the organization and the business need to move to a cloud environment.
Identify the scope of the security architecture and include a topology. To narrow your scope, focus on is.
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline
Cst 630 Education is Power/newtonhelp.comamaranthbeg73
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more course tutorials visit
www.newtonhelp.com
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
Click the following link to learn more about security management: Security Management.
In the next step, you will explore a scenario on suspicious behavior, and your report will provide another section of your CIR.
Step 2: Track Suspicious Behavior
You've completed your wireless and BYOD security plan. Now it's time to take a look at another workplace situation.
You have been notified of an employee exhibiting suspicious behavior. You decide to track the employee's movements by using various tools and techniques. You know the location and time stamps associated with the employee's mobile device.
How would you track the location of the company asset?
Explain how identity theft could occur and how MAC spoofing could
If overload does not get you, underload might. People are not ever b.docxwalthamcoretta
If overload does not get you, underload might. People are not ever bored to death by their jobs, but there is good evidence that they can be “bored to sickness.” Researchers at the Institute for Social Research of the University of Michigan found that boring jobs are hardest on health.
Give an example of a time where you were UNDERloaded. How did you feel? What did you do about it? In that situation, which would have been preferable, being underloaded, or overloaded?
.
If we sensed and attended equally to each stimulus in the world, the.docxwalthamcoretta
If we sensed and attended equally to each stimulus in the world, the amount of information would be overwhelming. What sensory and perceptual processes help us lessen the din?
4.
What senses, outside of hearing, would likely be impaired if a
person were somehow missing all of the apparatus of the ear
(including the outer, middle, and inner ear)?
Answer
each question in at least 50 words.
Cite your references.
.
More Related Content
Similar to You need to analyze the features of three videoconferencing systems
AppSec How-To: Achieving Security in DevOpsCheckmarx
How do you integrate security within a Continuous Deployment (CD) environment, where every 5 minutes a feature, an enhancement, or a bug fix needs to be released? Find out in this Checkmarx How-To Paper.
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool
For more course tutorials visit
www.tutorialrank.com
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
For more course tutorials visit
www.tutorialrank.com
CYB 610 Project 1 Information Systems and Identity Management
CYB 610 Project 2 Operating Systems Vulnerabilities (Windows and Linux)
CYB 610 Project 3 Assessing Information System Vulnerabilities and Risk
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more course tutorials visit
www.tutorialrank.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems
member is a security software architect in a cloud service provider .docxwkyra78
member is a security software architect in a cloud service provider company, assigned to a project to provide the client with data integrity and confidentiality protections for data in transit that will be using applications in the cloud. Your client is an HR company that is moving HR applications and HR data into a community cloud, sharing tenancy with other clients. Your company has set up a software as a service, SAS, offering for its client base.
The data that the HR company will be pushing to and from the cloud will contain sensitive employee information, such as personally identifiable information, PII. You will have to address sensitive data and transit issues of the client data using the HR applications stored in the cloud, and provide a life cycle management report that includes solutions to the cloud computing architect of your company.
Software Development Life Cycle
Technology development and implementation usually follow a software development life cycle (SDLC) methodology. This approach ensures accuracy of information for analysis and decision making, as well as appropriate resources for effective technology management.
You and your team members will use components of the SDLC methodology to develop a
life cycle management report
for the cloud computing architect of a company. This is a group exercise, representing the kind of collaboration often required in the cybersecurity technology community.
There are 11 steps to lead you through this project. Similar steps are typically used in organizational SDLC projects. Most steps should take no more than two hours to complete, and the entire project should take no more than three weeks to complete. Begin with the workplace scenario, and then continue with Step 1: “Initiating the Project.”
Life Cycle Management Report:
A 10- to 15-page double-spaced Word document on data protection techniques for a cloud-based service with citations in APA format. The page count does not include figures or tables. There is no penalty for using additional pages if you need them. Include a minimum of six references. Include a reference list with the report.
As the cloud security architect, you must understand the security development life cycle process. Review the following resources to learn about the security development life cycle process:
security development life cycle
software development methodologies
Click the following links to learn more about critical infrastructure sectors:
Critical Infrastructure Sectors
. Read their descriptions and consider which sector you support in your role.
Process Control Systems: Cybersecurity and Defense
To be completed by a designated team member:
You will begin your Life Cycle Management Report now.
Choose a fictional or actual organization. Describe the mission of the organization and the business need to move to a cloud environment.
Identify the scope of the security architecture and include a topology. To narrow your scope, focus on is.
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline
Cst 630 Education is Power/newtonhelp.comamaranthbeg73
For more course tutorials visit
www.newtonhelp.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more course tutorials visit
www.newtonhelp.com
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
Project 2
Step 1: Develop a Wireless and BYOD Security Plan
Since the company you work for has instituted a bring your own device (BYOD) policy, security attitudes have been lax and all sorts of devices, authorized and unauthorized, have been found connected to the company's wireless infrastructure. In this first step, you will develop a wireless and BYOD security plan for the company.
Use the NIST Guidelines for Securing Wireless Local Area Networks (WLANs) Special Publication 800-153 to provide an executive summary to answer other security concerns related to BYOD and wireless. Within your cybersecurity incident report, provide answers to the threat of unauthorized equipment or rogue access points on the company wireless network and the methods to find other rogue access points. Describe how to detect rogue access points and how they can actually connect to the network. Describe how to identify authorized access points within your network.
Within your plan, include how the Cyber Kill Chain framework and approach could be used to improve the incident response times for networks.
Include this at the beginning of your CIR as the basis for all wireless- and BYOD-related problems within the network. Title the section "Wireless and BYOD Security Plan."
Click the following link to learn more about security management: Security Management.
In the next step, you will explore a scenario on suspicious behavior, and your report will provide another section of your CIR.
Step 2: Track Suspicious Behavior
You've completed your wireless and BYOD security plan. Now it's time to take a look at another workplace situation.
You have been notified of an employee exhibiting suspicious behavior. You decide to track the employee's movements by using various tools and techniques. You know the location and time stamps associated with the employee's mobile device.
How would you track the location of the company asset?
Explain how identity theft could occur and how MAC spoofing could
Similar to You need to analyze the features of three videoconferencing systems (20)
If overload does not get you, underload might. People are not ever b.docxwalthamcoretta
If overload does not get you, underload might. People are not ever bored to death by their jobs, but there is good evidence that they can be “bored to sickness.” Researchers at the Institute for Social Research of the University of Michigan found that boring jobs are hardest on health.
Give an example of a time where you were UNDERloaded. How did you feel? What did you do about it? In that situation, which would have been preferable, being underloaded, or overloaded?
.
If we sensed and attended equally to each stimulus in the world, the.docxwalthamcoretta
If we sensed and attended equally to each stimulus in the world, the amount of information would be overwhelming. What sensory and perceptual processes help us lessen the din?
4.
What senses, outside of hearing, would likely be impaired if a
person were somehow missing all of the apparatus of the ear
(including the outer, middle, and inner ear)?
Answer
each question in at least 50 words.
Cite your references.
.
If Men Could Menstruate By Gloria Steinem, Ms. Magazine, O.docxwalthamcoretta
If Men Could Menstruate
By Gloria Steinem, Ms. Magazine, October 1978
A white minority of the world has spent centuries conning us into thinking that a white skin makes
people superior—even though the only thing it really does is make them more subject to ultraviolet rays
and to wrinkles. Male human beings have built whole cultures around the idea that penis-envy is
“natural” to women—though having such an unprotected organ might be said to make men vulnerable,
and the power to give birth makes womb-envy at least as logical.
In short, the characteristics of the powerful, whatever they may be, are thought to be better than the
characteristics of the powerless—and logic has nothing to do with it.
What would happen, for instance, if suddenly, magically, men could menstruate and women could not?
The answer is clear—menstruation would become an enviable, boast-worthy, masculine event:
Men would brag about how long and how much.
Boys would mark the onset of menses, that longed-for proof of manhood, with religious ritual and stag
parties.
Congress would fund a National Institute of Dysmenorrhea to help stamp out monthly discomforts.
Sanitary supplies would be federally funded and free. (Of course, some men would still pay for the
prestige of commercial brands such as John Wayne Tampons, Muhammad Ali’s Rope-a-dope Pads,
Joe Namath Jock Shields—“For Those Light Bachelor Days,” and Robert “Baretta” Blake Maxi-Pads.)
Military men, right-wing politicians, and religious fundamentalists would cite menstruation (“men-
struation”) as proof that only men could serve in the Army (“you have to give blood to take blood”),
occupy political office (“can women be aggressive without that steadfast cycle governed by the planet
Mars?”), be priest and ministers (“how could a woman give her blood for our sins?”) or rabbis (“without
the monthly loss of impurities, women remain unclean”).
Male radicals, left-wing politicians, mystics, however, would insist that women are equal, just different,
and that any woman could enter their ranks if she were willing to self-inflict a major wound every month
(“you MUST give blood for the revolution”), recognize the preeminence of menstrual issues, or
subordinate her selfness to all men in their Cycle of Enlightenment. Street guys would brag (“I’m a three
pad man”) or answer praise from a buddy (“Man, you lookin‘ good!”) by giving fives and saying, “Yeah,
man, I’m on the rag!” TV shows would treat the subject at length. (“Happy Days”: Richie and Potsie try
to convince Fonzie that he is still “The Fonz,” though he has missed two periods in a row.) So would
newspapers. (SHARK SCARE THREATENS MENSTRUATING MEN. JUDGE CITES MONTHLY
STRESS IN PARDONING RAPIST.) And movies. (Newman and Redford in “Blood Brothers”!)
Men would convince women that intercourse was more pleasurable at “that time of the month.”
Lesbians would be said to fear blood and therefore life itself—though probably only because.
If machine 2 was purchased on April 1 instead of July 1, what would .docxwalthamcoretta
If machine 2 was purchased on April 1 instead of July 1, what would be the depreciation expense for this machine in 2013? In 2014?
2013
2014
Depreciation Expense
$
:
:
[removed]
$
[removed]
IFRS 10-4
Ratzlaff Company issues €2 million, 10-year, 8% bonds at 97, with interest payable on July 1 and January 1.
Prepare the journal entry to record the sale of these bonds on January 1, 2014.
(Credit account titles are automatically indented when the amount is entered. Do not indent manually.)
Date
Account Titles and Explanation
Debit
Credit
Jan. 1
[removed]
[removed]
[removed]
[removed]
[removed]
[removed]
SHOW LIST OF ACCOUNTS
LINK TO TEXT
Assuming instead that the above bonds sold for 104, prepare the journal entry to record the sale of these bonds on January 1, 2014.
(Credit account titles are automatically indented when the amount is entered. Do not indent manually.)
Date
Account Titles and Explanation
Debit
Credit
Jan. 1
[removed]
[removed]
[removed]
[removed]
[removed]
[removed]
.
If I Had Been the Attorney of Record Then...For this Written Assig.docxwalthamcoretta
If I Had Been the Attorney of Record Then...
For this Written Assignment you will be writing a
3-5-page paper using APA format
, 12-point font and standard margins. You are REQUIRED to use a minimum of 3 (three) outside sources to support your points in your paper. Make sure you include a proper reference page. Be sure to properly cite, and no plagarism
There have been numerous cases in the media where there has been focus not only on the client but also on the lawyer that represents that client.
Select a case from the following – OJ Simpson, Anna Nicole Smith, Casey Anthony, the Central Park jogger, Bensonhurt, Charles Manson, William Kennedy Smith, Rodney King– or select another one of your own choosing
.
You are going to discuss the case, the venue of the case (state or federal and discuss how the case may have been different had it been in the alternate court system), discuss the media and access and analyze the role that the lawyers – both the representing lawyer and the opposing lawyer – had in the case and how they handled the case. Finally, assume that you have been the lawyer in the case and walk through how you would have handled this case from the first phone call with the client to the final outcome. Access how the result may have been different or similar.
.
If the Quabbin Reservoir Watershed is 100 km2, the average preci.docxwalthamcoretta
If the Quabbin Reservoir Watershed is 100 km
2
, the average precipitation in New England is 130 cm/year, and the volume of the Reservoir is 1.5 x 10
12
liters, what is the residence time of water in the Reservoir with respect to rain? Please show your calculation and explain all your assumptions. (5 points)
.
Identifytwo barriers that influence your critical thinking.Inc.docxwalthamcoretta
Identify
two barriers that influence your critical thinking.
Include
barriers listed in Thinking: An Interdisciplinary Approach to Critical and Creative Thought, Ch. 2 *
Write
at least 100 words for each barrier, describing them and how you can overcome them. Total word count will be at least 200 words.
Format
your assignment consistent with APA guidelines.
Reference
at least the textbook both in the reference page and in-text citations.
Submit
your assignment to the Assignment Files tab.
.
If using the Ballard Integrated Managed Services, Inc. (BIMS) case s.docxwalthamcoretta
If using the Ballard Integrated Managed Services, Inc. (BIMS) case study overview:
Resource:
University of Phoenix Material: Ballard Integrated Managed Services, Inc., Part 2.
Read
the University of Phoenix Material: Ballard Integrated Managed Services, Inc., Part 2. Your team acts as a consultant group that analyzes and interprets this second set of data. The intent is to increase senior management’s understanding of the sources of employee dissatisfaction and to create a model that predicts employee resignation.
Combine
your Week Two Learning Team assignment and Week Three findings with Week Five findings and make a recommendation to BIMS.
Prepare
a 1,050- to 1,750-word written report along with a 7- to 9-slide Microsoft
®
PowerPoint
®
presentation for the senior management team to present your findings (see Exhibit D for the data set of the second survey).
.
Identifying OpportunitiesSelect a company which is described in re.docxwalthamcoretta
Identifying Opportunities
Select a company which is described in reputable business news sources such as Forbes, Wall Street Journal, Fortune, or others. Visit the company website(s) to identify additional information about the company. Describe how the company is using the Web.
On the basis of your collected information, examine important business processes and strategies that the company uses. Suggest information systems that might give competitive advantages to the particular businesses.
Your paper should be at least three double spaced pages in length, excluding the title page and the reference pages, and formatted in APA style. You must have more than two scholarly sources, including the textbook.
.
Identifying and responding effectively to grant proposals is more an.docxwalthamcoretta
Identifying and responding effectively to grant proposals is more an art than a science. Most grants require applicants to complete a request for proposal (RFP), though there are a number of methods to respond to an RFP and the information requested through the RFP is not necessarily universal, meaning grants typically ask for varying information. With that background, discuss the overall concept of an RFP and the typical components of an RFP, along with strategies/techniques an organization should follow to respond effectively to an RFP. How can an agency be assured that they have effectively responded to an RFP?
.
Identify the research problem.Identify the research purpose.Summ.docxwalthamcoretta
Identify the research problem.
Identify the research purpose.
Summarize the review of literature.
Identify the nursing framework.
Identify the research questions and hypotheses.
Identify the variables.
Identify and discuss the appropriateness of the design.
Discuss the validity of the research.
Discuss the efficacy of the study. Did it resolve the question?
Discuss the legal and ethical issues of the study. Include the use of human subjects and their protection.
Describe any cultural aspects of the study.
Describe the sample.
Describe the procedures.
Summarize the results.
Describe how the results of the research may impact future nursing practice.
.
Identify two analytical tools used to process data collection..docxwalthamcoretta
Identify two analytical tools used to process data collection. How are they processed through organizational information systems?
When responding to your peers, compare their analytical tools to your own. What are some of the pros and cons of the tools that your classmates selected?
.
Identify two different examples (one positive and one negative) of.docxwalthamcoretta
Identify
two different examples (one positive and one negative) of social media that has impacted (or interacted with) global criminal justice systems.
Create
a 12- to 15- slide presentation in which you address the following:
Describe the impact/interaction the form of social media had upon the criminal justice system.
Explain the effects of the positive impact/interaction and suggest additional ways in which the criminal justice system can use this form of social media.
Explain the effects of the negative impact/interaction and suggest ways in which the criminal justice system can use this form of social media more effectively.
Using one of the social media forms that your team selected, develop a plan to use that social media form in a way that would have an impact on global policing, courts, and corrections systems.
Format
your presentation consistent with APA guidelines.
.
Identify three (3) Websites that you plan to use for your research o.docxwalthamcoretta
Identify three (3) Websites that you plan to use for your research on a paper to convince. When evaluating, think of yourself as an investigative reporter who is checking the claims of a politician who used the sources in his or her proposed bill. Identify the Website and its URL. Evaluate each Website regarding the following:
Targeted audience
Updating of information
Use of professional peer reviews
Information’s accuracy, relevance, and thoroughness
.
Identify the four basic financial statements.Describe the purpos.docxwalthamcoretta
Identify the four basic financial statements.
Describe the purpose of each of the four financial statements.
Discuss how the financial statements would be useful to internal users such as managers and employees.
Discuss how the financial statements would be useful to external users such as investors and creditors.
APA FORMAT 500-700 WORDS
.
Identify Funding OpportunityAfter you have completed your public h.docxwalthamcoretta
Identify Funding Opportunity
After you have completed your public health needs assessment matrix template, you will create a presentation that addresses the following:
Identify your chosen public health intervention that relates to your MPH coursework.
Explain how (using the MAPP Model) you completed the matrix template to identify your chosen public health intervention.
Explain why the intervention is an important initiative.
Identify whom the intervention will assist (target audience).
Explain the general requirements of the FOA.
Describe, at a high-level, your intended approach, in response to your chosen public health intervention, if awarded this grant.
.
Identify at least two (2) factors that have led to the explosive gro.docxwalthamcoretta
Identify at least two (2) factors that have led to the explosive growth of digital crime over the past a few decades. Next, describe the most common forms of digital crime, and give your opinion as to why those forms you described are so common. Provide a rationale for your response.
From the e-Activity, list three (3) types of digital crime, and name the main federal agencies which have primary responsibility to enforce digital crime laws. Next, recommend one (1) way for the federal agencies in question to improve the overall public response to computer crimes. Include the role of an individual citizen in the fight against digital crime in your discussion.
.
Identify two (2) classical Greek and or Roman figures or qualities.docxwalthamcoretta
Identify two (2) classical Greek and / or Roman figures or qualities in any work by Michelangelo or by Raphael. Discuss the primary reasons why popes and other patrons might allow such trappings of ancient pagan culture within a Christian society, even in sacred contexts. Provide a rationale for your response. Describe any modern structure or sculpture or work of art where you can identify either ancient pagan images or features, or a mix of elements from different cultures and periods.
.
Identify the subject and the verb1. Te angry student dropped the c.docxwalthamcoretta
Identify the subject and the verb
1. Te angry student dropped the class.
2. My brother is buying a Volkswagen Rabbit.
3.The students seemed sleepy
4.Jane3 had never visited the Art institute
5. Maria left the room
6.Her aunt and uncle are nice people
7. The child is playing in the rain
8. Tom drank the beer quickly
9 Henry and Susan like disco music
10 My siamese cats are hiding in the closet.
11 The thief was chased down the alley
12 Did the plane arrive on time?
13 The student have been listening to the lecture
14 Mark has always lived in Chicago
15 Can you play the guitar
16 Sonia has been a student for 30 years
17 We would like a case of coca-cola
18 will the Chicago cubs win the pennenant
19 Juan and Tony may wash the car
20 My brother should have studied for the test
.
Identify and describe a historical event in which the deindividuatio.docxwalthamcoretta
Identify and describe a historical event in which the deindividuation phenomenon occurred.
Explain the process of deindividuation (e.g., how it works, what changes happen within the individual to allow for unusual behavior).
Discuss how deindividuation might also occur outside the presence of a crowd, such as in other settings in which a person feels anonymous.
.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
2024.06.01 Introducing a competency framework for languag learning materials ...
You need to analyze the features of three videoconferencing systems
1. You need to analyze the features of three videoconferencing
systems and provide an overview of each system. After you
complete the overview of the systems, you'll recommend a
system which best meets the business functionality and security
requirements. You will also prepare a set of high level
executive briefing slides to give the CEO and CIO an overview
of your study. Your study and recommendation will be critical
to the company's success.
Cybersecurity professionals are frequently required to assess the
security, risk applications, and systems for business
communications before they can be added to an organization's
network. CISOs need to assess risks posed to the organization
and develop new security measures or adjust current measures
to address these risks appropriately. These evaluations involve
comparing competing applications or systems against the
organization's baseline to determine the best balance between
business needs and the security and risk appetite of the
organization.
Videoconferencing and collaboration systems vary in cost,
configuration, functionality, use, and collaboration capability.
These systems are trusted to facilitate sensitive and proprietary
discussions through their use of encrypted communication
channels. Yet these systems have vulnerabilities and are prone
to threats and attacks ranging from phishing, credential
compromise, and even malware insertion. Therefore, analysis of
possible threats, attacks, and vulnerabilities inherent in these
systems is critical in developing defense and protection
strategies for voice and video data at all endpoints and during
transit.
In this project, you will create a proposal for a secure
videoconferencing system, which will include an executive
summary, briefing/slide presentation, and lab report. The details
2. can be found in the final step of the project.
There are six steps to the project, and the project as a whole
should take about two weeks to complete. Begin with the
workplace scenario and then continue to Step 1.
Deliverables
Proposal for Secure Videoconferencing, Slides to Support
Executive Briefing, Lab Report
Step 1: Develop Functional Requirements for
Videoconferencing
The first step in your proposal for a secure videoconferencing
system is to develop a set of functional requirements for
videoconferencing that you believe the media company will
need based on its geographic dispersion and business needs.
In developing those requirements, research three
videoconferencing solutions such as Skype, GotoMeeting,
Polycom, and Cisco Webex and explain their capabilities,
advantages, and disadvantages. Identify costs as well as
implementation and support requirements.
The functional requirements and the three possible solutions
will be a section of your Proposal for Secure
Videoconferencing. In the next step, you will review the
challenges of implementing those solutions.
Step 2: Discuss Implementation Challenges
In the previous step, you outlined the requirements for secure
videoconferencing for the company and outlined three potential
solutions. Part of your final proposal should also include the
advantages and disadvantages of the implementation options for
3. the three systems you selected. This section of the proposal also
must include the changes the media company will need to make
to implement the systems.
Additionally, explain how system administration or privileged
identity management will operate with these systems. You will
also need to examine how data exfiltration will occur with each
of the new systems.
The changes to the systems and challenges for the
implementation of these potential solutions will be an important
section of your Proposal for Secure Videoconferencing. In the
next step, you will take a closer look at the track records of
each of the potential videoconferencing vendors.
Step 3: Identify Vendor Risks
You've finished outlining the pros and cons of three
videoconferencing systems. Now, it's time to take a close look
at how they serve their clients. This will take some research.
Look at the systems' known vulnerabilities and exploits.
Examine and explain the past history of each vendor with
normal notification timelines, release of patches, or work-
arounds (solutions within the system without using a patch).
Your goal is to know the timeliness of response with each
company in helping customers stay secure.
This step will be a section of your Proposal for Secure
Videoconferencing.
In the next step, you will outline best practices for secure
videoconferencing that will be part of your overall proposal to
management.
Step 4: Develop Best Practices for Secure Videoconferencing
4. The last few steps have been devoted to analyzing potential
videoconferencing solutions. But obtaining a trusted vendor is
just part of the security efforts. Another important step is to
ensure that users and system administrators conduct the
company's videoconferencing in a secure manner. In this step,
outline security best practices for videoconferencing that you
would like users and systems administrators to follow. Discuss
how these best practices will improve security and minimize
risks of data exfiltration as well as snooping.
This "best practices" section will be part of the overall Proposal
for Secure Videoconferencing.
In the next step, you will develop system integrity checks
within a virtual lab environment.
Step 5: Develop System Integrity Checks
As part of the overall proposal, the CISO has asked you to
develop system integrity checks for files shared between users
of the videoconferencing systems. These checks will ensure file
protection and prevent exfiltration of sensitive files.
The lab exercise will show how this is done. In this step, you
will generate a lab report that will be part of your final
assignment. The lab instructions will tell you what the report
needs to contain.
Complete This Lab
Here are some resources that will help you complete the lab:
Accessing the Virtual Lab Environment:
5. Navigating the Workspace and the Lab Setup
.
Review the
Workspace and Lab Machine Environment Tutorial
Lab Instructions:
Yara Lab Exercise
Self-Help Guide:
Workspace: Getting Started and Troubleshooting
Expand side panelCollapse side panel
Project 1: Risk, Threat, and Vulnerability ManagementProject
2: Incident ResponseProject 3: Enterprise Network
SecurityProject 4: Secure Videoconferencing Communications
Start Here
Step 1: Develop Functional Requirements for
Videoconferencing
Step 2: Discuss Implementation Challenges
Step 3: Identify Vendor Risks
Step 4: Develop Best Practices for Secure Videoconferencing
Step 5: Develop System Integrity Checks
Step 6: Submit Your Proposal for Secure Videoconferencing and
All Related Materials
Project 5: Data Loss Prevention (Group Project)
Step 6: Submit Your Proposal for Secure Videoconferencing and
All Related Materials
It's time to prepare your materials on secure videoconferencing
for management. Your task is to recommend a system that best
6. meets the business functionality and security requirements of
the company. As part of that recommendation, you will also
prepare a set of high-level executive briefing slides to give the
CEO and CIO an overview of your study.
The assignments for this project are as follows:
Executive briefing: This is a three- to five-slide visual
presentation for business executives and board members.
Executive summary: This is a one-page summary at the
beginning of your Proposal for Secure Videoconferencing.
Proposal for Secure Videoconferencing: Your report should be a
minimum six-page double-spaced Word document with citations
in APA format. The page count does not include figures,
diagrams, tables or citations.
Lab report: Generated from Workspace.
Submit all four components to the assignment folder.