Study of corrosion control effect of H2S scavengers in drilling fluidsMutiu K. Amosa, Ph.D.
Selected environmentally benign iron compounds (synthetic magnetite and ferrous gluconate) have been evaluated as corrosion inhibitors for oil-well steel (N-80) in 50 mg/l sulphide concentration at various pH ranging from 5.5 to 11.5 and at High Temperature, High Pressure (HTHP) conditions by the weight loss method. The test temperatures were 150 °F, 275 °F and 350 °F respectively for pressures of 3 000 psi, 5 000 psi and 6 000 psi. The ferrous complex was found to be a better corrosion inhibitor compared to the synthetic magnetite. It exhibited up to 99.2% inhibition efficiency (IE) when the dose of the scavenger was doubled (i.e. when the sulphide to scavenger ratio was 1:2) irrespective of other factors such as pH, temperature and pressure. Whereas, the synthetic magnetite’s optimum inhibition efficiency (IE) was observed to be up to 75.1% only when the ratio of the sulphide to scavenger was 1:4 at the lowest pH of the experiment (pH 5.5) which is not desirable for a drilling mud. As the pH increases, the inhibition efficiency of the magnetite decreases and found to be lowest at the alkaline pH of 11.5.
Done by: Sukari group
School name; Omar Bin Khattab secondary school for boys.
The project aimed to study how the investigated triazole derivative controls the corrosion of mild steel in sulfuric acid solutions. The corrosion rates in absence and presence of different concentrations of inhibitor will be measured using weight loss and potentiodynamic polarization techniques. Also, the effect of inhibitor on surface morphology of carbon steel will be investigated using scanning electron microscope.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Adsorption of cr (vi) from aqueous environment using neem leaves powdereSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Study of corrosion control effect of H2S scavengers in drilling fluidsMutiu K. Amosa, Ph.D.
Selected environmentally benign iron compounds (synthetic magnetite and ferrous gluconate) have been evaluated as corrosion inhibitors for oil-well steel (N-80) in 50 mg/l sulphide concentration at various pH ranging from 5.5 to 11.5 and at High Temperature, High Pressure (HTHP) conditions by the weight loss method. The test temperatures were 150 °F, 275 °F and 350 °F respectively for pressures of 3 000 psi, 5 000 psi and 6 000 psi. The ferrous complex was found to be a better corrosion inhibitor compared to the synthetic magnetite. It exhibited up to 99.2% inhibition efficiency (IE) when the dose of the scavenger was doubled (i.e. when the sulphide to scavenger ratio was 1:2) irrespective of other factors such as pH, temperature and pressure. Whereas, the synthetic magnetite’s optimum inhibition efficiency (IE) was observed to be up to 75.1% only when the ratio of the sulphide to scavenger was 1:4 at the lowest pH of the experiment (pH 5.5) which is not desirable for a drilling mud. As the pH increases, the inhibition efficiency of the magnetite decreases and found to be lowest at the alkaline pH of 11.5.
Done by: Sukari group
School name; Omar Bin Khattab secondary school for boys.
The project aimed to study how the investigated triazole derivative controls the corrosion of mild steel in sulfuric acid solutions. The corrosion rates in absence and presence of different concentrations of inhibitor will be measured using weight loss and potentiodynamic polarization techniques. Also, the effect of inhibitor on surface morphology of carbon steel will be investigated using scanning electron microscope.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Adsorption of cr (vi) from aqueous environment using neem leaves powdereSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Ginger extract as corrosion inhibitor from natural resources was studied to prevent corrosion of mild steel in acid media. Ginger rhizome was extracted to produce green corrosion inhibitor (G-1) while ginger powder bought at supermarket was also extracted to form a green corrosion inhibitor (G-2). Effectiveness of inhibitor in preventing corrosion process of mild steel was studied in 1.0 M of hydrochloric acid
2. evaluation of remediation in heavy metal tolerance and removal by comamona...Darshan Rudakiya
Comamonas acidovorans has vital role in degradation of natural as well as complex organic compounds. Comamonas acidovorans MTCC 3364 is mainly used for bioconversion of different steroids but now it is a novel approach on bioremediation. In heavy metals hexavalent chromium, mercury and lead is very toxic and carcinogenic for human health. Organism can tolerate heavy metals like hexavalent chromium, mercury, lead and aluminium with high efficiency. Removal of hexavalent chromium is major problem to textile as well as different industries. Comamonas acidovorans MTCC 3364 removed 99% of the hexavalent chromium from the medium and it can tolerate up to 600 ppm of chromium and 200 ppm of mercury in solidified medium. This organism shows high tolerance against salt i.e. it can tolerate up to 10% of salt. Chromium removal was also observed by using biosorption studies and MIC method. This bacteria increases pH during removal of chromium and makes chromium oxide which is trivalent chromium; it is a non-toxic compound. High salt tolerance, heavy metal tolerance and removal of hexavalent chromium make applicability in the treatment of waste water technology and treatment of industrial effluent which contain high amount of salt and heavy metals.
Removal of Chromium (VI) From Aqueous Solutions Using Discarded Solanum Tuber...inventy
Industrial polluting effluents containing heavy metals are of serious environmental concern in India. Chromium is frequently used in industries like electroplating, metal finishing, cooling towers, dyes, paints, anodizing and leather tanning and is found as traces in effluents finding their way to natural water bodies causing hazardous toxicity to the health of humans, animals and aquatic lives directly or indirectly. Many methods for the removal of Chromium such as chemical reduction, precipitation, ion exchange, electrochemical reduction, evaporation, reverse osmosis and adsorption using activated carbon etc. have been reported but all being expensive and complicated to operate. Experimental practices reveal that adsorption by agricultural and horticultural wastes are quite simple, inexpensive and efficient method. Agra is famous for Potato farming, a lot of discarded potato waste from cold storages is thrown along road side drains causing solid waste generated which either creates solid waste disposal problem or otherwise it finds way to Yamuna river resulting high BOD and posing a serious threat to the aquatic environment. For developing countries like India adsorption studies using discarded potato (Solanum tuberosum) waste from cold storages (DPWC) a solid waste as low cost adsorbent for Chromium removal was dual beneficial i.e., an ideal solution to these solid wastes disposal problem of Agra and removal of Chromium from tannery effluents and thereby saving aquatic life from Chromium contamination in Yamuna river. Keeping this in view batch experiments were designed to study the feasibility of discarded potato waste from cold storages to remove chromium (VI) from the aqueous solutions. During the study various affecting parameters, such as pH, adsorbent does, initial concentration, temperature, contact time, adsorbent grain size and start up agitation speed were optimized as 5.0, 10-20 g/l, 50 mg/l, 250C, 135 minutes, average size and 80 rpm respectively on chromium removal efficiency. Various Isotherms such as Langmuir, Freundlich, Tempkin also fitted suitably and various corresponding constants determined from these Isotherms favor and support the adsorption. Thermodynamic constants ∆G, ∆H and ∆S were found to be 0.267 KJ/mole, 0.288 KJ/mole and 0.0013 KJ/mole respectively.
A Study of Newly Schiff Base as Corrosion Inhibitor for Metal Corrosion in Ac...ijtsrd
The Schiff base 2 3,4 dihydroxy 5 nitrophenyl methylidene hydrazine 1 carbothioamide DHNPMHC synthesized by condensation of 3,4 dihydroxcy 5 nitro benzaldehyde and thiosemicarbazide. The structure of Schiff base was characterized by elemental analysis, FT IR and UV – Vis methods. The inhibition efficiency of DHNPMHC towards the corrosion of iron in 0.5M HCl was investigated using weight loss measurement technique. Results showed that DHNPMHC is an effective inhibitor for iron corrosion in 0.5M HCl solution. The inhibition efficiency also increased with concentration of inhibitor increased. The maximum corrosion inhibition e ciency of inhibitor reported at 5 5X10 5M inhibitor concentration is 89.52 . Adsorption of the inhibitor on the iron surface followed Langmuir adsorption isotherm. Sanjay Kumar | Dr. Yogesh Chahar | Dr. V. K. Swami "A Study of Newly Schiff Base as Corrosion Inhibitor for Metal Corrosion in Acidic Medium" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45226.pdf Paper URL: https://www.ijtsrd.com/chemistry/physical-chemistry/45226/a-study-of-newly-schiff-base-as-corrosion-inhibitor-for-metal-corrosion-in-acidic-medium/sanjay-kumar
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Effect of Inhibitor Concentration and Immersion Time on the Corrosion Rate an...AJSERJournal
The effect of inhibitor concentration and immersion time on the corrosion rate and inhibition efficiency of
AISI 1019 steel in seawater environment were investigated by means of weight loss measurement (WLM) at an interval
of 6days for a period of 60 days. AISI 1019 steel were immersed in seawater solution in the absence and presence of
varying inhibitor concentrations of potassium chromate (PC), Sodium Nitrite(SN), Methyl Orange (MO), Methyl Red
(MR), Terminalia Catappa Leaves (TCL) Extract, Carica papaya Leaves (CPL) Extract. The results showed that there is an
increase in inhibition efficiency with increase in inhibitor concentration and decrease in inhibition efficiency with
increase in immersion time. The inorganic inhibitor (potassium chromate), inorganic inhibitor (Sodium Nitrite), the
organic Inhibitor (Methyl Orange), the organic inhibitor (Methyl Red), the green inhibitor (Terminalia Catappa Leaves)
and green inhibitor (Carica Papaya Leaves) produced their best inhibition efficiency of 71.94%, 634%, 68.94%, 68.32%,
627% ,59.79% respectively at a concentration of 10g/L. From the result obtained, the potassium chromate inhibitor has
better inhibitory property than other inhibitors, which revealed that it is best suited for inhibition of corrosion of mild
steel in seawater environment.
Ginger extract as corrosion inhibitor from natural resources was studied to prevent corrosion of mild steel in acid media. Ginger rhizome was extracted to produce green corrosion inhibitor (G-1) while ginger powder bought at supermarket was also extracted to form a green corrosion inhibitor (G-2). Effectiveness of inhibitor in preventing corrosion process of mild steel was studied in 1.0 M of hydrochloric acid
2. evaluation of remediation in heavy metal tolerance and removal by comamona...Darshan Rudakiya
Comamonas acidovorans has vital role in degradation of natural as well as complex organic compounds. Comamonas acidovorans MTCC 3364 is mainly used for bioconversion of different steroids but now it is a novel approach on bioremediation. In heavy metals hexavalent chromium, mercury and lead is very toxic and carcinogenic for human health. Organism can tolerate heavy metals like hexavalent chromium, mercury, lead and aluminium with high efficiency. Removal of hexavalent chromium is major problem to textile as well as different industries. Comamonas acidovorans MTCC 3364 removed 99% of the hexavalent chromium from the medium and it can tolerate up to 600 ppm of chromium and 200 ppm of mercury in solidified medium. This organism shows high tolerance against salt i.e. it can tolerate up to 10% of salt. Chromium removal was also observed by using biosorption studies and MIC method. This bacteria increases pH during removal of chromium and makes chromium oxide which is trivalent chromium; it is a non-toxic compound. High salt tolerance, heavy metal tolerance and removal of hexavalent chromium make applicability in the treatment of waste water technology and treatment of industrial effluent which contain high amount of salt and heavy metals.
Removal of Chromium (VI) From Aqueous Solutions Using Discarded Solanum Tuber...inventy
Industrial polluting effluents containing heavy metals are of serious environmental concern in India. Chromium is frequently used in industries like electroplating, metal finishing, cooling towers, dyes, paints, anodizing and leather tanning and is found as traces in effluents finding their way to natural water bodies causing hazardous toxicity to the health of humans, animals and aquatic lives directly or indirectly. Many methods for the removal of Chromium such as chemical reduction, precipitation, ion exchange, electrochemical reduction, evaporation, reverse osmosis and adsorption using activated carbon etc. have been reported but all being expensive and complicated to operate. Experimental practices reveal that adsorption by agricultural and horticultural wastes are quite simple, inexpensive and efficient method. Agra is famous for Potato farming, a lot of discarded potato waste from cold storages is thrown along road side drains causing solid waste generated which either creates solid waste disposal problem or otherwise it finds way to Yamuna river resulting high BOD and posing a serious threat to the aquatic environment. For developing countries like India adsorption studies using discarded potato (Solanum tuberosum) waste from cold storages (DPWC) a solid waste as low cost adsorbent for Chromium removal was dual beneficial i.e., an ideal solution to these solid wastes disposal problem of Agra and removal of Chromium from tannery effluents and thereby saving aquatic life from Chromium contamination in Yamuna river. Keeping this in view batch experiments were designed to study the feasibility of discarded potato waste from cold storages to remove chromium (VI) from the aqueous solutions. During the study various affecting parameters, such as pH, adsorbent does, initial concentration, temperature, contact time, adsorbent grain size and start up agitation speed were optimized as 5.0, 10-20 g/l, 50 mg/l, 250C, 135 minutes, average size and 80 rpm respectively on chromium removal efficiency. Various Isotherms such as Langmuir, Freundlich, Tempkin also fitted suitably and various corresponding constants determined from these Isotherms favor and support the adsorption. Thermodynamic constants ∆G, ∆H and ∆S were found to be 0.267 KJ/mole, 0.288 KJ/mole and 0.0013 KJ/mole respectively.
A Study of Newly Schiff Base as Corrosion Inhibitor for Metal Corrosion in Ac...ijtsrd
The Schiff base 2 3,4 dihydroxy 5 nitrophenyl methylidene hydrazine 1 carbothioamide DHNPMHC synthesized by condensation of 3,4 dihydroxcy 5 nitro benzaldehyde and thiosemicarbazide. The structure of Schiff base was characterized by elemental analysis, FT IR and UV – Vis methods. The inhibition efficiency of DHNPMHC towards the corrosion of iron in 0.5M HCl was investigated using weight loss measurement technique. Results showed that DHNPMHC is an effective inhibitor for iron corrosion in 0.5M HCl solution. The inhibition efficiency also increased with concentration of inhibitor increased. The maximum corrosion inhibition e ciency of inhibitor reported at 5 5X10 5M inhibitor concentration is 89.52 . Adsorption of the inhibitor on the iron surface followed Langmuir adsorption isotherm. Sanjay Kumar | Dr. Yogesh Chahar | Dr. V. K. Swami "A Study of Newly Schiff Base as Corrosion Inhibitor for Metal Corrosion in Acidic Medium" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45226.pdf Paper URL: https://www.ijtsrd.com/chemistry/physical-chemistry/45226/a-study-of-newly-schiff-base-as-corrosion-inhibitor-for-metal-corrosion-in-acidic-medium/sanjay-kumar
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Effect of Inhibitor Concentration and Immersion Time on the Corrosion Rate an...AJSERJournal
The effect of inhibitor concentration and immersion time on the corrosion rate and inhibition efficiency of
AISI 1019 steel in seawater environment were investigated by means of weight loss measurement (WLM) at an interval
of 6days for a period of 60 days. AISI 1019 steel were immersed in seawater solution in the absence and presence of
varying inhibitor concentrations of potassium chromate (PC), Sodium Nitrite(SN), Methyl Orange (MO), Methyl Red
(MR), Terminalia Catappa Leaves (TCL) Extract, Carica papaya Leaves (CPL) Extract. The results showed that there is an
increase in inhibition efficiency with increase in inhibitor concentration and decrease in inhibition efficiency with
increase in immersion time. The inorganic inhibitor (potassium chromate), inorganic inhibitor (Sodium Nitrite), the
organic Inhibitor (Methyl Orange), the organic inhibitor (Methyl Red), the green inhibitor (Terminalia Catappa Leaves)
and green inhibitor (Carica Papaya Leaves) produced their best inhibition efficiency of 71.94%, 634%, 68.94%, 68.32%,
627% ,59.79% respectively at a concentration of 10g/L. From the result obtained, the potassium chromate inhibitor has
better inhibitory property than other inhibitors, which revealed that it is best suited for inhibition of corrosion of mild
steel in seawater environment.
In this file, you can ref interview materials for corrosion such as, corrosion situational interview, corrosion behavioral interview, corrosion phone interview, corrosion interview thank you letter, corrosion interview tips …
14 Types of Corrosion explained in an awesome manner
Update 26 June 2019: I have enabled the Download option and now everyone can download the "Types of corrosions" PPT and reuse the slides :) I wish I have done this earlier.
Follow my blogs at https://www.geekdashboard.com/
When you design your product, you put a lot of money, energy and consideration into achieving the best possible function, good appearance and high reliability. Corrosion, wear and fatigue resistance may not be the first factors you consider.
However, material selection is crucial to obtain a long service life and to avoid damage such as operation failure – for instance due to inadequate mechanical strength - or unacceptable appearance due to corrosion products.
If you choose the correct materials for your product from the beginning, you can prevent damage deriving from corrosion, wear and mechanical impact. In many cases, you may completely avoid corrosion by choosing a resistant material for its actual application environment.
Corrosion represents one of the most serious noticed in the industrial world especially in petrochemical, petroleum, power plants, etc.
Billions of Dollars are lost yearly due to the affect of corrosion in the world.
General Corrosion
Galvanic Corrosion
Concentration-Cell Corrosion
Intergranular Corrosion
Stress Corrosion Cracking
Pitting
Definitions, Major Causes of Corrosion,Other Causes of Corrosion, Forms Of Corrosion, How Does corrosion Happen ?,The Process of Corrosion (Five facts)
Measurement of Corrosion.
Corrosion Rate.
Comparison between Different metals.
Corrosion Prevention.
Corrosion monitoring.
Side effects of Prevention Methods.
Conclusion.
Surfactant-modified native soil in the treatment of oil field (Nimr) produc...mahfoodhshuely
In this study, we investigated the possibility to use surfactant-modified and unmodified native
sand (Oman) for the treatment of oil field (Nimr) produced water.