a natural process that converts a refined metal into a more chemically stable form such as oxide, hydroxide, carbonate or sulfide. It is the gradual destruction of materials (usually a metal) by chemical and/or electrochemical reaction with their environment.
1. The document discusses corrosion of metals, including definitions, types (chemical and electrochemical), and causes.
2. Chemical or dry corrosion is caused by direct chemical attack from gases like oxygen, leading to oxidation. Electrochemical or wet corrosion occurs via formation of anodic and cathodic areas when a metal is in contact with an electrolyte.
3. Factors like the nature of oxide layers formed and Pilling-Bedworth ratio determine if oxidation causes a protective or non-protective layer. Hydrogen can also cause embrittlement or decarburization of steel.
Corrosion is the degradation of materials due to reaction with the environment. It affects metals, non-metals, and living tissues, causing damage like material loss and increased costs. Proper material selection, design modifications, environmental control, and protective coatings or cathodic protection can prevent a majority of corrosion damage and reduce annual economic losses estimated to be 3-5% of global GDP.
14 Types of Corrosion explained in an awesome manner
Update 26 June 2019: I have enabled the Download option and now everyone can download the "Types of corrosions" PPT and reuse the slides :) I wish I have done this earlier.
Follow my blogs at https://www.geekdashboard.com/
The document discusses different types of corrosion and how to calculate corrosion rates. It describes 10 common types of corrosion including general attack, localized pitting and crevice corrosion, galvanic corrosion, stress corrosion cracking, and high temperature corrosion. It also explains that corrosion rates depend on factors like weight loss, metal density, surface area, and time, and can be determined using electrochemical measurements and Faraday's law.
Corrosion of Metals and Prevention of CorrosionHiba Hibs
about corrosion of metals like copper , iron , silver with diagrams and also methods to prevent corrosion like alloying , chrome plating , galvanization etc.
The document discusses various types of corrosion that can occur in dental materials including crevice corrosion, galvanic corrosion, pitting corrosion, stress corrosion, and concentration cell corrosion. It also discusses tarnish, which is the dulling or discoloration of metal surfaces through chemical film formation. Factors that can lead to corrosion and tarnish of dental restorations include dietary and oral hygiene habits, bacterial activity, and presence of acids, chlorides, and other chemicals in the oral environment. Protection against corrosion involves use of alloys with noble metals, polishing of surfaces, and application of protective coatings.
1. The document discusses corrosion of metals, including definitions, types (chemical and electrochemical), and causes.
2. Chemical or dry corrosion is caused by direct chemical attack from gases like oxygen, leading to oxidation. Electrochemical or wet corrosion occurs via formation of anodic and cathodic areas when a metal is in contact with an electrolyte.
3. Factors like the nature of oxide layers formed and Pilling-Bedworth ratio determine if oxidation causes a protective or non-protective layer. Hydrogen can also cause embrittlement or decarburization of steel.
Corrosion is the degradation of materials due to reaction with the environment. It affects metals, non-metals, and living tissues, causing damage like material loss and increased costs. Proper material selection, design modifications, environmental control, and protective coatings or cathodic protection can prevent a majority of corrosion damage and reduce annual economic losses estimated to be 3-5% of global GDP.
14 Types of Corrosion explained in an awesome manner
Update 26 June 2019: I have enabled the Download option and now everyone can download the "Types of corrosions" PPT and reuse the slides :) I wish I have done this earlier.
Follow my blogs at https://www.geekdashboard.com/
The document discusses different types of corrosion and how to calculate corrosion rates. It describes 10 common types of corrosion including general attack, localized pitting and crevice corrosion, galvanic corrosion, stress corrosion cracking, and high temperature corrosion. It also explains that corrosion rates depend on factors like weight loss, metal density, surface area, and time, and can be determined using electrochemical measurements and Faraday's law.
Corrosion of Metals and Prevention of CorrosionHiba Hibs
about corrosion of metals like copper , iron , silver with diagrams and also methods to prevent corrosion like alloying , chrome plating , galvanization etc.
The document discusses various types of corrosion that can occur in dental materials including crevice corrosion, galvanic corrosion, pitting corrosion, stress corrosion, and concentration cell corrosion. It also discusses tarnish, which is the dulling or discoloration of metal surfaces through chemical film formation. Factors that can lead to corrosion and tarnish of dental restorations include dietary and oral hygiene habits, bacterial activity, and presence of acids, chlorides, and other chemicals in the oral environment. Protection against corrosion involves use of alloys with noble metals, polishing of surfaces, and application of protective coatings.
Corrosion occurs when a metal loses electrons and forms positive metal ions, reacting with oxygen and water. For iron, this forms rust. Corrosion happens faster in the presence of salt, pollutants, and heat, as they help carry electrons away from the metal. Common prevention methods include barriers like painting or greasing, sacrificial protection using more reactive metals, cathodic protection with batteries, and coating metals like galvanizing or electroplating.
This document discusses corrosion and how it affects metals. It defines corrosion as the slow process of decay of metals due to chemical or electrochemical reaction with their environment. This causes the formation of compounds like oxides on the metal surface. Corrosion occurs through both dry chemical reactions and wet electrochemical reactions that set up galvanic cells. The rate of corrosion is affected by factors like the metal's position in the galvanic series, purity, environment, and characteristics of the corrosion products formed. Common types of corrosion discussed are rusting of iron and methods to prevent or reduce corrosion like coatings, cathodic protection, and modifying the environment.
This document discusses corrosion, providing definitions and theories of corrosion. It describes dry corrosion theory involving direct reaction with gases like oxygen. Wet or galvanic corrosion theory involves formation of an electrochemical cell with oxidation at the anode and reduction at the cathode. The main types of corrosion discussed are uniform, pitting, intergranular, stress, crevice, and galvanic. Prevention methods covered include material selection, design considerations, environmental modification, and cathodic and anodic protection.
Corrosion is the destruction of metals through reaction with the environment. It can occur in dry or wet environments and causes economic and safety issues. There are two main types of corrosion: general/uniform corrosion, which occurs at the same rate over the entire surface, and localized corrosion, which affects only certain areas. Methods of preventing corrosion include proper material selection, protective coatings like paint and plating, cathodic protection, and design considerations. Non-ferrous metals are metals that do not contain much iron and include aluminum, copper, zinc, and others which are used due to properties like corrosion resistance.
The document discusses corrosion, which is defined as the deterioration of materials through chemical or electrochemical reactions with the environment. It observes the appearance of five pure metals - iron, silver, copper, lead, and aluminum - and their corroded appearances. The main agents that cause corrosion are listed as acids, alkalies, salts, water, and oxygen. Some methods for preventing corrosion mentioned are galvanization, using electrolytes, and applying sacrificial coatings of more reactive metals.
Corrosion is the electrochemical deterioration of metals as they return to their natural state. For corrosion to occur, four conditions must be present: an anode, cathode, electrolyte, and metal path. Corrosion starts on the metal surface as a powdery deposit and then progresses inward. Common types of corrosion include uniform corrosion of unprotected metals, pitting corrosion which forms tiny pits (common on aluminum and magnesium), and galvanic corrosion which occurs when dissimilar metals are in contact.
The document discusses different types of corrosion that can occur in metals. It describes wet/aqueous corrosion which occurs in the presence of water and can include uniform, galvanic, crevice, pitting, and other forms of corrosion. It also discusses dry/high temperature corrosion which mainly includes oxidation and corrosion in sulfur environments. The document provides detailed explanations and examples of each type of corrosion.
This ppt explains basics of corrosion, its significance, Mechanism of electrochemical and chemical corrosion, Cathodic protection, Anodic protection, Sacrificial protection, Galvanization, Concentration Corrosion, Pitting Corrosion and also describe about the prevention and control of corrosion with respect to protective coatings and modification in design.
This document discusses various methods for protecting metals from corrosion. It first defines corrosion as the deterioration of materials through chemical interaction with the environment. It then explains that oxygen, humidity, and chemical salts are common causes of corrosion. The document goes on to describe several protection methods, including barrier protection using paints, oils, or electroplating; sacrificial protection using more reactive metals; and cathodic protection of underground pipes using more electropositive anodes.
Corrosion is the decay of metals due to environmental factors like oxygen, moisture, and other gases. It can cause economic losses and safety issues like reduced machine lifespan and structural failures. There are two main types of corrosion - dry corrosion through direct chemical reactions and wet corrosion through electrochemical processes. Some factors that influence corrosion rates are the metal's position in the galvanic series, surface properties, environmental conditions, and purity. Common corrosion control methods include cathodic protection, protective coatings, and preventing exposure to corrosive substances.
Atmospheric corrosion is a major cause of degradation and failure of metals exposed to outdoor and indoor environments. It accounts for significant economic losses as corroded metals must be replaced. While atmospheres are typically classified as industrial, marine, rural, or indoor, most real-world environments involve mixtures of conditions. Atmospheric corrosion occurs via localized corrosion cells and is influenced by factors like pollution, humidity, and proximity to salt or chemical sources. Proper material selection and protection methods are needed to prevent atmospheric corrosion in various environmental conditions.
ENGINEERING CHEMISTRY: Module 2-corrosion & its control - metal finishingrashmi m rashmi
Corrosion is the destruction of metals through chemical or electrochemical reaction with the environment. There are different types of corrosion including dry corrosion from gases, wet corrosion in liquids, galvanic corrosion between dissimilar metals, and differential aeration corrosion where parts of the same metal experience different oxygen levels. Corrosion occurs via an electrochemical process where a metal acts as the anode and undergoes oxidation, while another acts as the cathode and undergoes reduction. Factors that affect the corrosion rate include the metal type, corrosion product properties, potential differences, and environmental conditions such as temperature, pH, and conductivity. Corrosion can be controlled through methods like anodizing which forms a protective oxide layer, and phosphating
This document discusses tarnish and corrosion of dental restorations. It defines tarnish as surface discoloration or slight alteration, while corrosion is the actual deterioration of metal through reaction with the environment. The oral environment is conducive to corrosion due to its warmth, moisture, and wide pH fluctuations from foods and acids. The two main types of corrosion are chemical/dry corrosion and electrochemical/wet corrosion, the latter requiring an electrolyte like saliva. Galvanic corrosion can occur between dissimilar metals in contact. Stress, surface heterogeneity, and concentration cells also contribute to corrosion of dental materials.
Corrosion: Definition and significance of corrosion, mechanism of chemical (dry) and
electrochemical (wet) corrosion, galvanic corrosion, concentration corrosion and pitting
corrosion. Protection from corrosion; protective coatings-galvanization and tinning, cathodic
protection, sacrificial anode modifications in design.
The document discusses different types of corrosion including uniform, nonuniform, stain, pitting, point, undersurface, selective, intergranular, transgranular, and extraction corrosion. It also discusses rust protection methods such as controlling the corroding medium, material selection, surface treatments like coatings, and cathodic protection. Surface treatments aim to isolate, enrich, or form inhibitor layers on the metal surface to protect against corrosion.
in this presentation you will learn about corrosion about it amazing things we dont know and what are the advantages of alloys and other amazing facts.
The document discusses corrosion and its theories. It defines corrosion as the gradual deterioration of a metal through a chemical or electrochemical reaction with its environment. There are three main theories of corrosion discussed: acid theory, dry/chemical corrosion, and electrochemical/wet corrosion. Electrochemical corrosion involves the formation of an anode and cathode on a metal surface when it is exposed to an electrolyte. Metal ions are released at the anode through oxidation and electrons flow to the cathode. The document also discusses types of corrosion like galvanic corrosion and factors that influence corrosion.
Dry corrosion occurs through direct chemical reaction between atmospheric gases like carbon dioxide and sulfur dioxide with metal surfaces in the absence of moisture. There are three main types of dry corrosion: 1) Oxidation corrosion, which occurs through direct reaction of oxygen with metals at ordinary temperatures in the absence of moisture. 2) Liquid metal corrosion, which occurs when a liquid metal flows over a solid metal at high temperatures. 3) Corrosion by other gases, where certain gases chemically react with metals to form protective or non-protective surface layers. The extent of dry corrosion depends on the environment and the nature and properties of the oxide film formed on the metal surface.
Corrosion is one of the leading causes of premature spring failure. There are two main failure mechanisms: fatigue and embrittlement. Corrosion can significantly reduce a spring's fatigue life by facilitating crack initiation and propagation. The frequency of cyclic loading also affects corrosion fatigue behavior, with lower frequencies reducing fatigue strength. To prevent corrosion-related failures, material selection, fabrication processes, and protective coatings must be optimized based on the application environment. Proper diagnosis of corrosion mechanisms helps improve mitigation strategies.
This document discusses corrosion engineering and provides details on various corrosion topics. It begins with an introduction to corrosion and defines it as the deterioration of metal through chemical or electrochemical reactions with the environment. Some key points covered include:
- Corrosion costs the US economy $300 billion per year. Common examples of corrosion are rusting of iron when exposed to air and the formation of a green or blue film on copper in moist air.
- An electrochemical cell converts chemical energy of an indirect redox reaction into electrical energy. During corrosion, the metal being corroded acts as the anode and loses electrons/dissolves while another metal acts as the cathode and gains electrons.
- The main types of corrosion
This document defines corrosion as the deterioration of a material due to reaction with its environment, especially oxygen. Corrosion is an electrochemical process that occurs when a metal is exposed to oxygen and an electrolyte like water. Three factors are required for corrosion: a metal, oxygen, and an electrolyte. Corrosion causes deterioration of manufactured products and infrastructure. Understanding and preventing corrosion is important for maintaining machinery and structures. Corrosion occurs through oxidation and reduction reactions and can be localized or generalized. Methods to prevent corrosion include painting, sacrificial anodes, cathodic protection, and passivation.
Corrosion occurs when a metal loses electrons and forms positive metal ions, reacting with oxygen and water. For iron, this forms rust. Corrosion happens faster in the presence of salt, pollutants, and heat, as they help carry electrons away from the metal. Common prevention methods include barriers like painting or greasing, sacrificial protection using more reactive metals, cathodic protection with batteries, and coating metals like galvanizing or electroplating.
This document discusses corrosion and how it affects metals. It defines corrosion as the slow process of decay of metals due to chemical or electrochemical reaction with their environment. This causes the formation of compounds like oxides on the metal surface. Corrosion occurs through both dry chemical reactions and wet electrochemical reactions that set up galvanic cells. The rate of corrosion is affected by factors like the metal's position in the galvanic series, purity, environment, and characteristics of the corrosion products formed. Common types of corrosion discussed are rusting of iron and methods to prevent or reduce corrosion like coatings, cathodic protection, and modifying the environment.
This document discusses corrosion, providing definitions and theories of corrosion. It describes dry corrosion theory involving direct reaction with gases like oxygen. Wet or galvanic corrosion theory involves formation of an electrochemical cell with oxidation at the anode and reduction at the cathode. The main types of corrosion discussed are uniform, pitting, intergranular, stress, crevice, and galvanic. Prevention methods covered include material selection, design considerations, environmental modification, and cathodic and anodic protection.
Corrosion is the destruction of metals through reaction with the environment. It can occur in dry or wet environments and causes economic and safety issues. There are two main types of corrosion: general/uniform corrosion, which occurs at the same rate over the entire surface, and localized corrosion, which affects only certain areas. Methods of preventing corrosion include proper material selection, protective coatings like paint and plating, cathodic protection, and design considerations. Non-ferrous metals are metals that do not contain much iron and include aluminum, copper, zinc, and others which are used due to properties like corrosion resistance.
The document discusses corrosion, which is defined as the deterioration of materials through chemical or electrochemical reactions with the environment. It observes the appearance of five pure metals - iron, silver, copper, lead, and aluminum - and their corroded appearances. The main agents that cause corrosion are listed as acids, alkalies, salts, water, and oxygen. Some methods for preventing corrosion mentioned are galvanization, using electrolytes, and applying sacrificial coatings of more reactive metals.
Corrosion is the electrochemical deterioration of metals as they return to their natural state. For corrosion to occur, four conditions must be present: an anode, cathode, electrolyte, and metal path. Corrosion starts on the metal surface as a powdery deposit and then progresses inward. Common types of corrosion include uniform corrosion of unprotected metals, pitting corrosion which forms tiny pits (common on aluminum and magnesium), and galvanic corrosion which occurs when dissimilar metals are in contact.
The document discusses different types of corrosion that can occur in metals. It describes wet/aqueous corrosion which occurs in the presence of water and can include uniform, galvanic, crevice, pitting, and other forms of corrosion. It also discusses dry/high temperature corrosion which mainly includes oxidation and corrosion in sulfur environments. The document provides detailed explanations and examples of each type of corrosion.
This ppt explains basics of corrosion, its significance, Mechanism of electrochemical and chemical corrosion, Cathodic protection, Anodic protection, Sacrificial protection, Galvanization, Concentration Corrosion, Pitting Corrosion and also describe about the prevention and control of corrosion with respect to protective coatings and modification in design.
This document discusses various methods for protecting metals from corrosion. It first defines corrosion as the deterioration of materials through chemical interaction with the environment. It then explains that oxygen, humidity, and chemical salts are common causes of corrosion. The document goes on to describe several protection methods, including barrier protection using paints, oils, or electroplating; sacrificial protection using more reactive metals; and cathodic protection of underground pipes using more electropositive anodes.
Corrosion is the decay of metals due to environmental factors like oxygen, moisture, and other gases. It can cause economic losses and safety issues like reduced machine lifespan and structural failures. There are two main types of corrosion - dry corrosion through direct chemical reactions and wet corrosion through electrochemical processes. Some factors that influence corrosion rates are the metal's position in the galvanic series, surface properties, environmental conditions, and purity. Common corrosion control methods include cathodic protection, protective coatings, and preventing exposure to corrosive substances.
Atmospheric corrosion is a major cause of degradation and failure of metals exposed to outdoor and indoor environments. It accounts for significant economic losses as corroded metals must be replaced. While atmospheres are typically classified as industrial, marine, rural, or indoor, most real-world environments involve mixtures of conditions. Atmospheric corrosion occurs via localized corrosion cells and is influenced by factors like pollution, humidity, and proximity to salt or chemical sources. Proper material selection and protection methods are needed to prevent atmospheric corrosion in various environmental conditions.
ENGINEERING CHEMISTRY: Module 2-corrosion & its control - metal finishingrashmi m rashmi
Corrosion is the destruction of metals through chemical or electrochemical reaction with the environment. There are different types of corrosion including dry corrosion from gases, wet corrosion in liquids, galvanic corrosion between dissimilar metals, and differential aeration corrosion where parts of the same metal experience different oxygen levels. Corrosion occurs via an electrochemical process where a metal acts as the anode and undergoes oxidation, while another acts as the cathode and undergoes reduction. Factors that affect the corrosion rate include the metal type, corrosion product properties, potential differences, and environmental conditions such as temperature, pH, and conductivity. Corrosion can be controlled through methods like anodizing which forms a protective oxide layer, and phosphating
This document discusses tarnish and corrosion of dental restorations. It defines tarnish as surface discoloration or slight alteration, while corrosion is the actual deterioration of metal through reaction with the environment. The oral environment is conducive to corrosion due to its warmth, moisture, and wide pH fluctuations from foods and acids. The two main types of corrosion are chemical/dry corrosion and electrochemical/wet corrosion, the latter requiring an electrolyte like saliva. Galvanic corrosion can occur between dissimilar metals in contact. Stress, surface heterogeneity, and concentration cells also contribute to corrosion of dental materials.
Corrosion: Definition and significance of corrosion, mechanism of chemical (dry) and
electrochemical (wet) corrosion, galvanic corrosion, concentration corrosion and pitting
corrosion. Protection from corrosion; protective coatings-galvanization and tinning, cathodic
protection, sacrificial anode modifications in design.
The document discusses different types of corrosion including uniform, nonuniform, stain, pitting, point, undersurface, selective, intergranular, transgranular, and extraction corrosion. It also discusses rust protection methods such as controlling the corroding medium, material selection, surface treatments like coatings, and cathodic protection. Surface treatments aim to isolate, enrich, or form inhibitor layers on the metal surface to protect against corrosion.
in this presentation you will learn about corrosion about it amazing things we dont know and what are the advantages of alloys and other amazing facts.
The document discusses corrosion and its theories. It defines corrosion as the gradual deterioration of a metal through a chemical or electrochemical reaction with its environment. There are three main theories of corrosion discussed: acid theory, dry/chemical corrosion, and electrochemical/wet corrosion. Electrochemical corrosion involves the formation of an anode and cathode on a metal surface when it is exposed to an electrolyte. Metal ions are released at the anode through oxidation and electrons flow to the cathode. The document also discusses types of corrosion like galvanic corrosion and factors that influence corrosion.
Dry corrosion occurs through direct chemical reaction between atmospheric gases like carbon dioxide and sulfur dioxide with metal surfaces in the absence of moisture. There are three main types of dry corrosion: 1) Oxidation corrosion, which occurs through direct reaction of oxygen with metals at ordinary temperatures in the absence of moisture. 2) Liquid metal corrosion, which occurs when a liquid metal flows over a solid metal at high temperatures. 3) Corrosion by other gases, where certain gases chemically react with metals to form protective or non-protective surface layers. The extent of dry corrosion depends on the environment and the nature and properties of the oxide film formed on the metal surface.
Corrosion is one of the leading causes of premature spring failure. There are two main failure mechanisms: fatigue and embrittlement. Corrosion can significantly reduce a spring's fatigue life by facilitating crack initiation and propagation. The frequency of cyclic loading also affects corrosion fatigue behavior, with lower frequencies reducing fatigue strength. To prevent corrosion-related failures, material selection, fabrication processes, and protective coatings must be optimized based on the application environment. Proper diagnosis of corrosion mechanisms helps improve mitigation strategies.
This document discusses corrosion engineering and provides details on various corrosion topics. It begins with an introduction to corrosion and defines it as the deterioration of metal through chemical or electrochemical reactions with the environment. Some key points covered include:
- Corrosion costs the US economy $300 billion per year. Common examples of corrosion are rusting of iron when exposed to air and the formation of a green or blue film on copper in moist air.
- An electrochemical cell converts chemical energy of an indirect redox reaction into electrical energy. During corrosion, the metal being corroded acts as the anode and loses electrons/dissolves while another metal acts as the cathode and gains electrons.
- The main types of corrosion
This document defines corrosion as the deterioration of a material due to reaction with its environment, especially oxygen. Corrosion is an electrochemical process that occurs when a metal is exposed to oxygen and an electrolyte like water. Three factors are required for corrosion: a metal, oxygen, and an electrolyte. Corrosion causes deterioration of manufactured products and infrastructure. Understanding and preventing corrosion is important for maintaining machinery and structures. Corrosion occurs through oxidation and reduction reactions and can be localized or generalized. Methods to prevent corrosion include painting, sacrificial anodes, cathodic protection, and passivation.
This topic describes two main categories of corrosion. It also explains the electrochemical corrosion phenomena and the differences between the types of corrosion. This topic also states the corrosion preventive steps.
Corrosion occurs via electrochemical reactions between a material, usually a metal, and its environment. There are several types of corrosion including uniform corrosion, pitting, crevice corrosion, and intergranular corrosion. Corrosion can be prevented through methods like cathodic protection, selecting corrosion-resistant materials, using protective coatings, designing to avoid corrosion-prone situations, and alloying metals to enhance corrosion resistance. Managing corrosion is important as it can lead to infrastructure and equipment failures which are costly to repair and can impact safety.
This pdf is useful for learning all the things about corrosion and the methods of controlling it using different things. It will help people understand the basic chemistry behind the corrosion along with the chemical reactions . galvanic corrosion, electrochemical corrosion, dry corrosion, wet corrosion. it will tell you more about the basic chemistry behind using the anodic and cathodic coatings
Corrosion is the deterioration of materials due to chemical reactions with their environment. It can occur due to factors like humidity, corrosive gases, stress, electrical currents, and bacteria. There are two main types of corrosion: dry/chemical corrosion which involves direct chemical reactions, and wet/electrochemical corrosion which involves the formation of anodic and cathodic areas on a metal surface. Common corrosion prevention methods include using surface coatings, galvanization, alloyed steels, cathodic protection, and new solutions like EonCoat which provides a maintenance-free protective layer.
This document discusses corrosion, its causes, types, and methods of prevention. Corrosion is the degradation of materials through reaction with their environment. Common types include uniform corrosion, galvanic corrosion, and pitting corrosion. Prevention methods include using sacrificial materials, coating surfaces with primers or barrier coatings, cathodic protection like galvanization or impressed current, and regular maintenance. Understanding corrosion allows better material selection and protection to reduce economic losses.
Corrosion of constructional steels in marine and industrial environmentSpringer
The document summarizes corrosion processes of iron and steel. It discusses how iron forms a protective oxide film when exposed to air that inhibits further corrosion. For steel, alloying elements like copper, chromium, and nickel are discussed as improving corrosion resistance by forming a more compact rust scale. Weathering steels are described as developing a tightly adhering rust layer over time from alloying elements like chromium and copper that protects the steel underneath. The document outlines various forms of corrosion and factors affecting corrosion rates of steel in atmospheric environments.
Corrosion of constructional steels in marine and industrial environmentSpringer
The document summarizes corrosion processes of iron and steel. It discusses how iron forms a protective oxide film when exposed to air that inhibits further corrosion. For steel, alloying elements like copper, chromium, and nickel are discussed as improving corrosion resistance by forming a more compact rust scale. Weathering steels are described as developing a tightly adhering rust layer over time from alloying elements like chromium and copper that protects the steel underneath. The document outlines various forms of corrosion and factors affecting corrosion rates of steel in atmospheric environments.
The document discusses corrosion and its causes. Corrosion occurs via chemical or electrochemical reactions between a metal and its environment that cause deterioration. It can be caused by oxygen, hydrogen, electrical currents, stress, or bacteria. Corrosion occurs via dry/chemical reactions directly with gases or wet/electrochemical reactions in an electrolyte that form anodes and cathodes. The rate depends on factors like the metal's position in the galvanic series and properties of any surface oxide or corrosion product layer.
Corrosion is the process by which metals return to their natural oxidation states through redox reactions, often with oxygen. It causes deterioration of metal products and structures. There are three main components required for corrosion: a metal, oxygen, and an electrolyte like water. Corrosion occurs through either generalized thinning of the metal surface or localized pitting. It is an electrochemical process where the metal acts as an anode and is oxidized while oxygen is reduced at the cathode. Corrosion can be prevented using methods like painting, sacrificial anodes, cathodic protection, or exploiting natural corrosion products that form protective barriers.
The document provides information on topics related to rusting and corrosion of iron for CXC exams, including:
- Rusting is the oxidation of iron in the presence of oxygen and water to form hydrated iron(III) oxide. Only iron and alloys containing iron rust.
- Methods for preventing rust include using protective coatings like paint and grease, attaching a more reactive sacrificial metal like zinc, and creating rust-resistant alloys like stainless steel.
- Recycling metals has economic, social, and environmental benefits like reducing costs and waste, conserving resources, and decreasing pollution from metal extraction. However, recycling also has expenses and implementation challenges.
The document discusses corrosion, which is the gradual destruction of metals through chemical or electrochemical reaction with the environment. Rusting of iron is a common example. There are two main types of corrosion - direct chemical corrosion which occurs through reaction with gases, and electrochemical corrosion which occurs when a metal is in contact with a conducting liquid. Electrochemical corrosion results from the formation of galvanic cells and the flow of current between anodic and cathodic areas. Methods of controlling corrosion include selecting corrosion-resistant materials, using protective coatings like paints and anodizing, adding corrosion inhibitors, and cathodic protection techniques.
This document discusses various types and theories of corrosion. It begins by introducing corrosion as the chemical reaction between a metal and its environment that causes the metal to deteriorate. It then describes three main theories of corrosion: the acid theory, dry/chemical theory, and galvanic/electrochemical theory. The rest of the document details eight specific types of corrosion including uniform, pitting, intergranular, exfoliation, stress, crevice, galvanic, and erosion corrosion. It provides examples and explanations for each type.
Video lecture is available on YouTube on the link:https://youtu.be/xrBnxxN-RUw
For UG students of All Engineering Branches, Chemistry, Food Science, Polymer Science, Chemical Engg. etc.
Corrosion is the spontaneous reaction between a material like steel and its environment that degrades the material over time. For ships, corrosion poses a major problem as it can compromise the structural integrity of the vessel. There are two main methods to prevent corrosion - cathodic protection, which makes the structure negative to corrosion, and coatings, which act as a barrier between the steel and environment. Effective coatings must adhere well to the steel, be impermeable to water and oxygen, and have a thickness and pigmentation that limits penetration over the life of the coating.
I/II SEM BE, VTU, ENGINEERING CHEMISTRY , Module 2rashmi m rashmi
1. The document discusses various types of corrosion including dry corrosion, wet corrosion, differential metal corrosion, differential aeration corrosion, pitting corrosion, stress corrosion, and water line corrosion.
2. It explains the electrochemical theory of corrosion and factors that affect the rate of corrosion such as the nature of the metal, corrosion product, potential difference, anodic/cathodic areas, pH, temperature, and conductivity.
3. Methods of corrosion control discussed are anodizing, phosphating, galvanization, and tinning which involve coating metals with protective layers to prevent corrosion. Anodizing forms a protective aluminum oxide layer while galvanization coats iron with zinc and tinning coats iron with tin.
There are several types of corrosion that can occur:
1. Uniform and galvanic corrosion which results from direct chemical attack or from dissimilar metals in contact being exposed to an electrolyte.
2. Erosion corrosion caused by abrasive fluid flow removing a metal's protective surface film.
3. Crevice and pitting corrosion which are localized forms of corrosion occurring in cracks, crevices or defects in a metal surface.
4. Intergranular corrosion which attacks grain boundaries in metals or alloys.
5. Other forms include exfoliation, selective leaching, stress corrosion cracking, waterline corrosion affecting ship hulls, soil corrosion depending on soil conditions, and microbiologically influenced corrosion caused by
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
1. Corrosion
Pesala Shalal
What is corrosion ?
Corrosion is when a refined metal is naturally converted to a more stable form such as its oxide,
hydroxide or sulphide state this leads to deterioration of the material. Corrosion is usually defined
as the degradation of metals due to an electrochemical process. The formation of rust on iron,
tarnish on silver, and the blue-green patina that develops on copper are all examples of corrosion.
The total cost of corrosion in the United States is significant, with estimates in excess of half a
trillion dollars a year.
Statue of Liberty: Changing Colors
The Statue of Liberty is a landmark every American recognizes. The Statue of Liberty is easily
identified by its height, stance, and unique blue-green color (Figure 1). When this statue was first
delivered from France, its appearance was not green. It was brown, the color of its copper “skin.”
So how did the Statue of Liberty change colors? The change in appearance was a direct result of
corrosion. The copper that is the primary component of the statue slowly underwent oxidation from
the air. The oxidation-reduction reactions of copper metal in the environment occur in several
steps. Copper metal is oxidized to copper(I) oxide (Cu2O), which is red, and then to copper(II)
oxide, which is black
2Cu(s)+12O2(g)Cu2O(s)(red)Cu2O(s)+12O2(g)2CuO(s)(black)2Cu(s)+12O2(g)Cu2O(s)(red)Cu2
O(s)+12O2(g)2CuO(s)(black)
Coal, which was often high in sulfur, was burned extensively in the early part of the last century.
As a result, sulfur trioxide, carbon dioxide, and water all reacted with the CuO
2CuO(s)+CO2(g)+H2O(l)Cu2CO3(OH)2(s)(green)3CuO(s)+2CO2(g)+H2O(l)Cu2(CO3)2(OH)2(s
)(blue)4CuO(s)+SO3(g)+3H2O(l)Cu4SO4(OH)6(s)(green)2CuO(s)+CO2(g)+H2O(l)Cu2CO3(OH)
2(s)(green)3CuO(s)+2CO2(g)+H2O(l)Cu2(CO3)2(OH)2(s)(blue)4CuO(s)+SO3(g)+3H2O(l)Cu4S
O4(OH)6(s)(green)
2. 2
These three compounds are responsible for the characteristic blue-green patina seen today.
Fortunately, formation of the patina created a protective layer on the surface, preventing further
corrosion of the copper skin. The formation of the protective layer is a form of passivation, which
is discussed further in a later chapter.
Figure 1. (a) The Statue of Liberty is covered with a copper skin, and was originally brown, as shown in
this painting. (b) Exposure to the elements has resulted in the formation of the blue-green patina seen today.
Perhaps the most familiar example of corrosion is the formation of rust on iron. Iron will rust when
it is exposed to oxygen and water. The main steps in the rusting of iron appear to involve the
following (Figure 2). Once exposed to the atmosphere, iron rapidly oxidizes.
anode:Fe(s)⟶Fe2+(aq)+2e−E∘Fe2+/Fe=−0.44Vanode:Fe(s)⟶Fe2+(aq)+2
e−EFe2+/Fe∘=−0.44V
The electrons reduce oxygen in the air in acidic solutions.
cathode:O2(g)+4H+(aq)+4e−⟶2H2O(l)E∘O2/O2=+1.23Vcathode:O2(g)+4
H+(aq)+4e−⟶2H2O(l)EO2/O2∘=+1.23V
overall:2Fe(s)+O2(g)+4H+(aq)⟶2Fe2+(aq)+2H2O(l)E∘cell=+1.67Voveral
l:2Fe(s)+O2(g)+4H+(aq)⟶2Fe2+(aq)+2H2O(l)Ecell∘=+1.67V
3. 3
What we call rust is hydrated iron(III) oxide, which forms when iron(II) ions react further with
oxygen.
4Fe2+(aq)+O2(g)+(4+2x)H2O(l)⟶2Fe2O3⋅xH2O(s)+8H+(aq)4Fe2+(aq)
+O2(g)+(4+2x)H2O(l)⟶2Fe2O3⋅xH2O(s)+8H+(aq)
The number of water molecules is variable, so it is represented by x. Unlike the patina on copper,
the formation of rust does not create a protective layer and so corrosion of the iron continues as the
rust flakes off and exposes fresh iron to the atmosphere.
Figure 2. Once the paint is scratched on a painted iron surface, corrosion occurs and rust begins to
form. The speed of the spontaneous reaction is increased in the presence of electrolytes, such as the
sodium chloride used on roads to melt ice and snow or in salt water.
One way to keep iron from corroding is to keep it painted. The layer of paint prevents the water
and oxygen necessary for rust formation from coming into contact with the iron. As long as the
paint remains intact, the iron is protected from corrosion.
Other strategies include alloying the iron with other metals. For example, stainless steel is mostly
iron with a bit of chromium. The chromium tends to collect near the surface, where it forms an
oxide layer that protects the iron.
Zinc-plated or galvanized iron uses a different strategy. Zinc is more easily oxidized than iron
because zinc has a lower reduction potential. Since zinc has a lower reduction potential, it is a
more active metal. Thus, even if the zinc coating is scratched, the zinc will still oxidize before the
iron. This suggests that this approach should work with other active metals.
4. 4
Another important way to protect metal is to make it the cathode in a galvanic cell. This
is cathodic protection and can be used for metals other than just iron. For example, the rusting of
underground iron storage tanks and pipes can be prevented or greatly reduced by connecting them
to a more active metal such as zinc or magnesium (Figure 3). This is also used to protect the metal
parts in water heaters. The more active metals (lower reduction potential) are called sacrificial
anodes because as they get used up as they corrode (oxidize) at the anode. The metal being
protected serves as the cathode, and so does not oxidize (corrode). When the anodes are properly
monitored and periodically replaced, the useful lifetime of the iron storage tank can be greatly
extended.
Figure 3. One way to protect an underground iron storage tank is through cathodic protection.
Using an active metal like zinc or magnesium for the anode effectively makes the storage tank the
cathode, preventing it from corroding (oxidizing)
CORROSION TYPES
UNIFORM CORROSION
Uniform corrosion is considered an even attack across the surface of a material and is the most
common type of corrosion. It is also the most benign as the extent of the attack is relatively easily
5. 5
judged, and the resulting impact on material performance is fairly easily evaluated due to an ability
to consistently reproduce and test the phenomenon. This type of corrosion typically occurs over
relatively large areas of a material’s surface.
PITTING CORROSION
Pitting is one of the most destructive types of corrosion, as it can be hard to predict, detect and
characterize. Pitting is a localized form of corrosion, in which either a local anodic point, or more
commonly a cathodic point, forms a small corrosion cell with the surrounding normal surface. Once
a pit has initiated, it grows into a “hole” or “cavity” that takes on one of a variety of different shapes.
Pits typically penetrate from the surface downward in a vertical direction. Pitting corrosion can be
caused by a local break or damage to the protective oxide film or a protective coating; it can also be
caused by non-uniformities in the metal structure itself. Pitting is dangerous because it can lead to
failure of the structure with a relatively low overall loss of metal.
CREVICE CORROSION
Crevice corrosion is also a localized form of corrosion and usually results from a stagnant
microenvironment in which there is a difference in the concentration of ions between two areas of a
metal. Crevice corrosion occurs in shielded areas such as those under washers, bolt heads, gaskets,
etc. where oxygen is restricted. These smaller areas allow for a corrosive agent to enter but do not
allow enough circulation within, depleting the oxygen content, which prevents re-passivation. As a
stagnant solution builds, pH shifts away from neutral. This growing imbalance between the crevice
(microenvironment) and the external surface (bulk environment) contributes to higher rates of
corrosion. Crevice corrosion can often occur at lower temperatures than pitting. Proper joint design
helps to minimize crevice corrosion.
6. 6
INTERGRANULAR CORROSION
An examination of the microstructure of a metal reveals the grains that form during solidification of
the alloy, as well as the grain boundaries between them. Intergranular corrosion can be caused by
impurities present at these grain boundaries or by the depletion or enrichment of an alloying
element at the grain boundaries. Intergranular corrosion occurs along or adjacent to these grains,
seriously affecting the mechanical properties of the metal while the bulk of the metal remain intact.
An example of intergranular corrosion is carbide precipitation, a chemical reaction that can occur
when a metal is subjected to very high temperatures (e.g., 800°F - 1650°F) and/or localized hot work
such as welding. In stainless steels, during these reactions, carbon “consumes” the chromium,
forming carbides and causing the level of chromium remaining in the alloy to drop below the 11%
needed to sustain the spontaneously-forming passive oxide layer. 304L and 316L are enhanced
chemistries of 304 and 316 stainless that contain lower levels of carbon, and would provide the best
corrosion resistance to carbide precipitation.
STRESS CORROSION CRACKING (SCC)
Stress corrosion cracking (SCC) is a result of the combination of tensile stress and a corrosive
environment, often at elevated temperatures. Stress corrosion may result from external stress such
as actual tensile loads on the metal or expansion/contraction due to rapid temperature changes. It
may also result from residual stress imparted during the manufacturing process such as from cold
forming, welding, machining, grinding, etc. In stress corrosion, the majority of the surface usually
remains intact; however, fine cracks appear in the microstructure, making the corrosion hard to
detect. The cracks typically have a
brittle appearance and form and
spread in a direction
perpendicular to the location of
the stress. Selecting proper
materials for a given environment
(including temperature and
management of external loads)
can mitigate the potential for
catastrophic failure due to SCC.
GALVANIC CORROSION
Galvanic corrosion is the
degradation of one metal near a
joint or juncture that occurs when
two electrochemically dissimilar
metals are in electrical contact in an electrolytic environment; for example, when copper is in
contact with steel in a saltwater environment. However, even when these three conditions are
satisfied, there are many other factors that affect the potential for, and the amount of, corrosion,
such as temperature and surface finish of the metals. Large engineered systems employing many
types of metal in their construction, including various fastener types and materials, are susceptible
to galvanic corrosion if care is not exercised during the design phase. Choosing metals that are as
close together as practicable on the galvanic series helps reduce the risk of galvanic corrosion.
7. 7
How Corrosion Occurs
Corrosion is an electrochemical reaction that appears in several forms, such as chemical corrosion
and atmospheric corrosion, the latter of which is the most common form. When acidic substances
(including water) come in contact with metals, such as iron and/or steel, rust begins to form. Rust
is the result of corroding steel after the iron (Fe) particles have been exposed to oxygen and
moisture (e.g., humidity, vapor, immersion). When steel is exposed to water, the iron particles are
lost to the water’s acidic electrolytes. The iron particles then become oxidized, which results in the
formation of Fe⁺⁺. When Fe⁺⁺ is formed, two electrons are released and flow through the steel to
another area of the steel known as the cathodic area.
Oxygen causes these electrons to rise up and form hydroxyl ions (OH). The hydroxyl ions react
with the FE⁺⁺ to form hydrous iron oxide (FeOH), better known as rust. Where the affected iron
particles were, has now become a corrosion pit, and where they are now, is called the corrosion
product (rust).
Corrosion can happen at any rate, depending on the environment that the metal is in. However,
since atmospheric corrosion is so widespread, it is recommended to take effective precautionary
measures when it comes to corrosion prevention.
This is a corroded tank.
8. 8
Removing and Treating Rust
Depending on the situation and application, you may be able to treat the area that has corroded. If
the affected area is small and treatable, you may require some tools and products to remove it.
Begin by removing the rust from the metal using a tools such as a grinding wheel or needle
gun. Be careful not to cause any additional damage to the metal.
For large corroded areas, you may want to consider a permanent protective coating, such as CSL’s
SI-COAT Anti Corrosion Protective Coating. You will also want to take this time to look at the
application as a whole for other premature signs of corrosion.
How Can I Prevent Corrosion?
One of the best ways to prevent corrosion is to apply an Anti-Corrosion Protective Coating. A
protective coating protects its substrate by preventing contact between the substrate and harsh
environments (atmospheric, chemical, etc.). Here at CSL Silicones Inc, we offer two kinds of anti-
corrosion protective coatings (one is an environmentally responsible Low VOC option!) that are
easily applied using only one coat. The Si-COAT® 579 AC protective coating is cost-effective and
offers long-lasting protection to virtually any substrate.
The coatings are environmentally responsible, have superior temperature resistance (can withstand
temperatures between -76°F and 392°F), will not chalk or fade, have a low film build, require only
a single-coat of application, and have outstanding UV resistance. The 180% elasticity makes the
coating highly flexible, which allows for thermal expansion and contraction of the substrate to
which it is applied.
9. 9
Left: A tank experiencing corrosion.
Right: The same tank following an application of Si-
COAT 579 Anti-Corrosion Protective Coating.
Si-COAT Anti-Corrosion Protective Coatings can be applied to a wide range of applications,
such as structural steel, bridges, machinery and equipment, areas with heavy corrosion, tank
exteriors, metal roofs, cladding, and more.
Si-COAT AC protective coatings are ideally applied to where the necessary coverage is essential
and maximum protection, adhesion, elasticity, and longevity are required.
Difference Between Corrosion and Rusting
Corrosion Rusting
Corrosion is the process of deterioration of metals and
non-metals by oxidation.
Rusting is oxidation of iron (or steel) in
presence of air and moisture.
Corrosion can occur on both metals and non-metals. It
may occur on skin and wood as well.
Rusting occurs on metals only such as iron
and steel.
Corrosion includes rusting. Rusting is a type of corrosion.
It requires exposure of air or chemicals on surface. It requires air and moisture both.
It may require corrosive chemicals such as HCl,
H2SO4 and other strong acids and bases.
It doesn’t require any chemicals.
The compound (or a layer) formed by corrosion can of
different colors such as blue, green etc.
Rusting forms rust which is red orange in
color.
10. 10
What is Rancidity?
Generally, students get confused between corrosion and rancidity. Rancidity is different from
corrosion although it is also an oxidation reaction. Rancidity is oxidation of fats and oils present in
food materials due to which smell and taste of the food material changes.
We can prevent it by adding antioxidants and keeping food in airtight containers.
What Is The Criteria For Selecting Corrosion-Resistant Alloys?
Corrosion resistance is the ability to prevent environmental deterioration by chemical or electro-
chemical reaction. Desirable characteristics of corrosion-resistant alloys, therefore, include high
resistance to overall reactions within the specific environment.
Some of the attractive properties that a metal may feature include:
• Minimized dissolution of the metal in aggressive solutions.
• High resistance to local attack, whether deep penetration in local pitting, networks of local
cracks associated with stress corrosion cracking, or intra-granular corrosion.
• Resistance to enhanced corrosion due to the presence of applied or residual stress or the
application of fluctuating stress.
• Resistance to enhanced corrosion at the interface under load of two contacting and slipping
surfaces.
• Resistance to accelerated local corrosion where mating surfaces of assemblies meet the
corrosive environment.
• Resistance to selective dissolution of a more active constituent of an alloy, leaving behind a
weak deposit of the other material – for example the dezincification of brass.
• Resistance to the combined action of different corrosion sources.
Methods of corrosion prevention
1. BARRIER COATINGS
One of the easiest and cheapest ways to prevent corrosion is to use barrier
coatings like paint, plastic, or powder. Powders, including epoxy, nylon, and
urethane, are heated to the metal surface to create a thin film. Plastic and waxes
are often sprayed onto metal surfaces. Paint acts as a coating to protect the
metal surface from the electrochemical charge that comes from corrosive
11. 11
compounds. Today’s paint systems are actually a combination of different
paint layers that serve different functions. The primer coat acts as an inhibitor,
the intermediate coat adds to the paint’s overall thickness, and the finish coat
provides resistance to environmental factors.
The biggest drawback with coatings is that they often need to be stripped and
reapplied. Coatings that aren’t applied properly can quickly fail and lead to
increased levels of corrosion. Coatings may also contain volatile organic
compounds, which can make them vulnerable to corrosion.
Failing Barrier Coating
2. HOT-DIP GALVANIZATION
This corrosion prevention method involves dipping steel into molten zinc. The
iron in the steel reacts with the zinc to create a tightly bonded alloy coating
which serves as protection. The process has been around for more than 250
years and has been used for corrosion protection of things like artistic
sculptures and playground equipment. Compared to other corrosion prevention
12. 12
methods, galvanization is known for lower initial costs, sustainability, and
versatility.
Unfortunately, galvanization can’t be done on-site, meaning companies have to
pull equipment out of work to be treated. Some equipment may simply be too
large for the process, forcing companies to abandon the idea altogether. In
addition, if the process isn’t done properly, the zinc can chip or peel. And high
exposure to environmental elements can speed up the process of zinc wear,
leading to increased maintenance check-ups. Lastly, the zinc fumes that release
from the galvanizing process are toxic.
3. ALLOYED STEEL (STAINLESS)
Alloyed steel is one of the most effective corrosion prevention methods
around, combining the properties of various metals to provide added strength
and resistance to the resulting product. Corrosion-resistant nickel, for example,
combined with oxidation-resistant chromium results in an alloy that can be
used in oxidized and reduced chemical environments. Different alloys provide
resistance to different conditions, giving companies greater flexibility.
Despite its effectiveness, alloyed steel is very expensive. Companies with
limited financial resources will likely have to turn to other
methods. Monitoring surface conditions are critical, as cracks or scratches can
result in an increase in corrosion. Companies also need to make sure the agents
used in maintenance don’t include corrosion properties.
13. 13
Pipeline using Cathodic Protection
4. CATHODIC PROTECTION
Cathodic protection protects against galvanic corrosion, which occurs
when two different metals are put together and exposed to a corrosive
electrolyte. To prevent this, the active sites on the metal surface need
to be converted to passive sites by providing electrons from another
source, typically with galvanic anodes attached on or near the surface.
Metals used for anodes include aluminum, magnesium, or zinc.
While cathodic protection is highly effective, anodes need to be
checked often which can drive up costs of maintenance. They also
increase the weight on the attached structure and aren’t always
effective in high-resistivity environments. Finally, anodes lead to
increased water flow on ships and other underwater equipment.
14. 14
What Are the Dangers of Corrosion?
Things that are corrosive can destroy (or at least damage) metal. But that’s not all. Eventually,
corrosives can cause damage to not only metal but the human digestive tract, respiratory tract,
eyes, and skin. The effects of corrosion can threaten our very lives.
The Dangers of Corrosion
When materials interact with the environment around them, deterioration caused by corrosion can
occur. In commercial applications, this usually pertains to damage to steel, iron, or metal from
road, rail, and bridge maintenance, warehouse cylinders and tanks, utilities, and pipework. Once
corrosion starts, structural failure is almost certainly inevitable. The main dangers and effects of
corrosion are as follows:
• High risk of employee injury or injury to the general public
• Loss of industrial equipment’s time availability
• When appearance is affected, corrosion can reduce the overall value of a building or
location
• Pipe blockages or mechanical damage to pumps, valves, etc.
• Damage to surroundings or danger to individuals because of leaking gases or liquids
• Contamination of fluids in pipes or vessels
Aside from industrial dangers, corrosion affects our lives as we travel to school, work, and for
leisure. Endangering public safety and resulting in significant repair costs are the effects of
corrosion on bridges, parking structures, buildings, electrical towers, highways, etc. Should these
collapse, because of a weak, corroded section, disaster could result.
15. 15
The Economic Impact and Effects of Corrosion
Annually, the United States economy is impacted by corrosion to the tune of literally hundreds of
billions of dollars. Practically speaking, however, if corrosion-resistant materials and coatings were
used more frequently in technical practices, a good one-third of those costs could be reduced.
In our daily lives, the effects of corrosion are both indirect and direct. Indirectly, corrosion is
passed on to customers through services, goods, suppliers, and producers. Directly, our very
possessions can suffer the effects of corrosion. At home, metal tools, outdoor furniture, charcoal
grills, and body panels on our automobiles corrode on a regular basis. There are precautions and
preventative methods for nearly all of these inconveniences. Certain corrosion deterrents are
already built into many of our household products such as dryers, washers, ranges, furnaces, water
heaters, and more.
CONCLUSION
In aqueous environments, metals may be exposed to not only uniform corrosion, but also to various
types of local corrosion including pitting, crevice, intergranular, stress, and galvanic corrosion. In
areas where corrosion is a concern, stainless steel products offer value and protection against these
threats. Stainless’ favorable chemical composition makes it resistant to many common corrosives
while remaining significantly more affordable than specialty alloys such as titanium and Inconel®
alloys.
Stainless steel is a highly alloyed, low-carbon steel with a high (at least 11%) chromium content.
When exposed to an oxygenated environment, the chromium reacts to form a passive oxide layer
on the metal’s surface, slowing further oxidation and providing a self-healing quality, which helps
resist uniform and local corrosion. Nickel helps to stabilize the microstructure, increasing SCC
resistance. Manganese, in moderate quantities and in association with nickel, will perform many
functions attributable to nickel and helps prevent pitting. The addition of molybdenum (the
additional element in Type 316 SS that increases its performance with respect to Type 304 SS),
helps increase resistance to pitting and crevice corrosion. Reduced levels of carbon, such as those
found in 304L and 316L will help prevent intergranular corrosion. Lastly, nitrogen, although not a
major element of stainless steel’s composition, increases pitting resistance. Choosing stainless steel
can help greatly reduce the risk of corrosion and yield long-term savings by avoiding the costs
associated with reinstallation of inferior products.