This document contains configuration steps for switches, routers, and servers. It configures VLANs, trunk ports, STP, routing protocols, NAT, DHCP, Active Directory, and more. Key steps include: 1. Configuring VLANs 30 and 40 on switch 1 with associated access ports. 2. Configuring a trunk port on switch 1 and IP addresses for the VLAN subinterfaces on router CASA. 3. Configuring OSPF routing on routers Meknes 1, Meknes 2 and CASA. 4. Configuring NAT translation and ACLs on router Meknes 1 to translate private to public IP addresses. 5. Configuring DHCP scope, options and DNS

1. Partie pratique :
23- a : no ip domain-lookup
B: banner motd *hello
c.line vty 0 4
password ISTA
login local
24-
Sw1 vlan 30 rpm
Sw1 vlan 40 stg
25-
Int fa0/1
Switchport mode access
Switchport access vlan 30
Int fa0/2
Switchport mode access
Switchport access vlan 40
26-
Int fa0/3
Switchport mode trunk
27-casa int g0/0
No shutdown
Int g0/0.30
Encapsulation dot 1q 30
Ip add 172.30.10.1 255.255.0.0
Casa int g0/0.40
Encapsulation dot 1q 40
Ip add 172.30.20.1 255.255.0.0

2. 28-
Sw2 spanning-tree vlan 1 root primary
Sw3 spaning-tree vlan 1 root secondary
29-
Fes username meknes 1 password eff 2021-v2
Int s0/0/1
Encapsulation ppp
Ppp authentication chap
Ppp chap hostname fes
Ppp chap password eff2021-v2
Meknes 1 username fes password eff2021-v2
Int s0/0/1
Encapsulation ppp
Ppp authentication chap
Ppp chap hostname meknes 1
Ppp chap password eff 2021-v2
30-
Sw2 Int range fa0/1-2
Channel-group 1 mode passive
Sw3 int range fa0/1-2
Channel-group 1 mode active
31-
Meknes 1 int g0/0
Standby 1 ip 192.168.20.1
Standby 1 priority 150

3. Standby 1 preempt
Meknes 2 int g0/0
Standby 1 192.168.20.1
Standby 1 preempt
32-
Meknes ip dhcp pool TRI
Network 192.168.20.0 255.255.255.0
Default-router 192.168.20.1
Dns-server 8.8.8.8
Ip dhcp excluded-adresse 192.168.20.1 192.168.20.20
33-
Meknes 1 Router ospf 10
Router-id 7.7.7.7
Network 70.0.0.0 0.0.0.3 area 0
Network 192.168.20.0 0.0.0.255 area 0
Meknes 2 router ospf 10
Router-id 6.6.6.6
Network 192.168.20.0 0.0.0.255 area 0
34-
Casa router ospf 10
Area 0 athentication message-digest
Int s0/0/0
Ip ospf message-digest-key 123 md5 eff2021-v2
35-
a- Meknes 1 access-list 1 permit 172.30.0.0 0.0.255.255

4. Ip nat inside source list 1 int s0/0/0 overload
Int s0/0/1
ip nat inside
int s0/0/0
ip nat outside
b- Meknes 1 ip nat inside source static 192.168.20.9 75.14.15.20
Int s0/0/0
Ip nat outside
int g0/0
ip nat inside
49-
Type slave
file/slave…
masters (172.20.10.3;172.20.10.2)
50-
Host pc01
Hardware Ethernet aa:
Fixed-adresse 172
51-
Path
Read-list
Write-list
@comptables@commerciaux
Administration sous windows
36-
rename-computer …-force reboot
37-
new-NetIPAddress –..IP-Aadress 172.20.10.3…. default gateway 172.20.10.1
38-
Set-dnsclientserveraddress interfacealias …. Serveradress
39-
installWindows-feature-…dhcpServer includeMnagementTools
40-
DHCP add securitygroupes
41-
Add-DhcpServerInDC - 172.16.0.21
42-

5. a. Add-DhcpServer4Scope…. –StartRange 172.20.10.20 EndRange
172.20.10.80-Subnetmask 255.255.255.0 –State active
b. Set-DhcpServerv4OptionValue172.20.10.1 –ScopeId172.20.10.0..
c. …DnsDomain .. 172.20.10.2
43-
AdDomainServices
44-
Install-AdDsForest
45-
Install-ADDSDomainController…..DomainName ..InstallationMediaPath
46-
NewADGroup …..subjects