A wireless sensor network mostly relies on multi-hop transmissions to deliver a data packet. It is of essential importance to measure the quality of multi-hop paths and such information shall be utilized in designing efficient routing strategies. Existing metrics like ETF, ETX mainly focus on quantifying the link performance in between the nodes while overlooking the forwarding capabilities inside the sensor nodes. By combining the QoF measurements within a node and over a link, we are able to comprehensively measure the intact path quality in designing efficient multihop routing protocols. We propose QoF, Quality of Forwarding, a new metric which explores the performance in the gray zone inside a node left unattended in previous studies. We implement QoF and build a modified Collection Tree Protocol.
Impact of energy and link quality indicator with link quality estimators in w...graphhoc
The Link Quality Indicator (LQI) and Residual Energy have a fundamental impact on the network
performance in Wireless Sensor Networks (WSNs) and affects as well in the life time of nodes. This paper
will provide a comparative of Link Quality Estimator, the Link Quality Estimator with Link Quality
Indicator and Link Quality Estimator with Residual Energy. In this paper we develop a Collect Tree
Protocol (CTP) and compare the performance of LQI and Residual Energy, and show their effect on the
packet delivery ratio and throughput, covering the characteristics of low-power links, and their
performance to the best of our knowledge, we believe that our efforts would have implementations on
embedded application.
Developing QoS by Priority Routing for Real Time Data in Internet of Things (...IJCNCJournal
In networks, many application protocols such as CoAP, REST, XMPP ,AMQP have been proposed for IoT communication which includes p2p or S2S. In MANET Network convergence does the way for improvements in Internet of Things (IoT) communication with high potential for a wide range of applications. Each protocol focuses on some aspects of communication in the IoT. Hence, these application protocols have indicated of how IoT has integrated to enhanced and developed of a new service that require to guarantees
the wide range offered by the quality of services. In this paper, we will introduce a smart pathway that can be bridge the gap between IoT services with its real data traffic. Therefore, we enhanced the MANET routing protocol for computing two or more paths to pass the more that one high priority real traffic data via these paths to improve the gloomy picture of this protocol in the context of IoT. In particular, the good services
with high timely delivery of urgent data such as real time data environmental monitoring. After surveying the published and available protocol interoperability given for urban sensing. In this research, we have proposed a novel solution to integrate MANET overlays, and collaboratively formed over MANET, to boost urban data in IoT. Overlays are used to dynamic differentiate and fasten the delivery of high priority real application time data over low-latency MANET paths by integrating with the original specifications. Our experimental results showed the effectiveness on the network such as the overhead and network congestion. In addition, the initial
results of the light-weight improved the routing protocol over the baseline protocols in terms of the delay of reciveing the packets between nodes which lead to increase the throughput by reducing loss packets.
DETERMINING THE NETWORK THROUGHPUT AND FLOW RATE USING GSR AND AAL2Rijujournal
In multi-radio wireless mesh networks, one node is eligible to transmit packets over multiple channels to different destination nodes simultaneously. This feature of multi-radio wireless mesh network makes high throughput for the network and increase the chance for multi path routing. This is because the multiple channel availability for transmission decreases the probability of the most elegant problem called as interference problem which is either of interflow and intraflow type. For avoiding the problem like interference and maintaining the constant network performance or increasing the performance the WMN need to consider the packet aggregation and packet forwarding. Packet aggregation is process of collecting several packets ready for transmission and sending them to the intended recipient through the channel, while the packet forwarding holds the hop-by-hop routing. But choosing the correct path among different available multiple paths is most the important factor in the both case for a routing algorithm. Hence the most challenging factor is to determine a forwarding strategy which will provide the schedule for each node for transmission within the channel. In this research work we have tried to implement two forwarding strategies for the multi path multi radio WMN as the approximate solution for the above said problem. We have implemented Global State Routing (GSR) which will consider the packet forwarding concept and Aggregation Aware Layer 2 Routing (AAL2R) which considers the both concept i.e. both packet forwarding and packet aggregation. After the successful implementation the network performance has been measured by means of simulation study.
Fuzzy Optimized Metric for Adaptive Network RoutingCSCJournals
Network routing algorithms used today calculate least cost (shortest) paths between nodes. The cost of a path is the sum of the cost of all links on that path. The use of a single metric for adaptive routing is insufficient to reflect the actual state of the link. In general, there is a limitation on the accuracy of the link state information obtained by the routing protocol. Hence it becomes useful if two or more metrics can be associated to produce a single metric that can describe the state of the link more accurately. In this paper, a fuzzy inference rule base is implemented to generate the fuzzy cost of each candidate path to be used in routing the incoming calls. This fuzzy cost is based on the crisp values of the different metrics; a fuzzy membership function is defined. The parameters of these membership functions reflect dynamically the requirement of the incoming traffic service as well as the current state of the links in the path. And this paper investigates how three metrics, the mean link bandwidth, queue utilization and the mean link delay, can be related using a simple fuzzy logic algorithm to produce a optimized cost of the link for a certain interval that is more „precise‟ than either of the single metric, to solve routing problem .
Transfer reliability and congestion control strategies in opportunistic netwo...IEEEFINALYEARPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.co¬m-Visit Our Website: www.finalyearprojects.org
Impact of energy and link quality indicator with link quality estimators in w...graphhoc
The Link Quality Indicator (LQI) and Residual Energy have a fundamental impact on the network
performance in Wireless Sensor Networks (WSNs) and affects as well in the life time of nodes. This paper
will provide a comparative of Link Quality Estimator, the Link Quality Estimator with Link Quality
Indicator and Link Quality Estimator with Residual Energy. In this paper we develop a Collect Tree
Protocol (CTP) and compare the performance of LQI and Residual Energy, and show their effect on the
packet delivery ratio and throughput, covering the characteristics of low-power links, and their
performance to the best of our knowledge, we believe that our efforts would have implementations on
embedded application.
Developing QoS by Priority Routing for Real Time Data in Internet of Things (...IJCNCJournal
In networks, many application protocols such as CoAP, REST, XMPP ,AMQP have been proposed for IoT communication which includes p2p or S2S. In MANET Network convergence does the way for improvements in Internet of Things (IoT) communication with high potential for a wide range of applications. Each protocol focuses on some aspects of communication in the IoT. Hence, these application protocols have indicated of how IoT has integrated to enhanced and developed of a new service that require to guarantees
the wide range offered by the quality of services. In this paper, we will introduce a smart pathway that can be bridge the gap between IoT services with its real data traffic. Therefore, we enhanced the MANET routing protocol for computing two or more paths to pass the more that one high priority real traffic data via these paths to improve the gloomy picture of this protocol in the context of IoT. In particular, the good services
with high timely delivery of urgent data such as real time data environmental monitoring. After surveying the published and available protocol interoperability given for urban sensing. In this research, we have proposed a novel solution to integrate MANET overlays, and collaboratively formed over MANET, to boost urban data in IoT. Overlays are used to dynamic differentiate and fasten the delivery of high priority real application time data over low-latency MANET paths by integrating with the original specifications. Our experimental results showed the effectiveness on the network such as the overhead and network congestion. In addition, the initial
results of the light-weight improved the routing protocol over the baseline protocols in terms of the delay of reciveing the packets between nodes which lead to increase the throughput by reducing loss packets.
DETERMINING THE NETWORK THROUGHPUT AND FLOW RATE USING GSR AND AAL2Rijujournal
In multi-radio wireless mesh networks, one node is eligible to transmit packets over multiple channels to different destination nodes simultaneously. This feature of multi-radio wireless mesh network makes high throughput for the network and increase the chance for multi path routing. This is because the multiple channel availability for transmission decreases the probability of the most elegant problem called as interference problem which is either of interflow and intraflow type. For avoiding the problem like interference and maintaining the constant network performance or increasing the performance the WMN need to consider the packet aggregation and packet forwarding. Packet aggregation is process of collecting several packets ready for transmission and sending them to the intended recipient through the channel, while the packet forwarding holds the hop-by-hop routing. But choosing the correct path among different available multiple paths is most the important factor in the both case for a routing algorithm. Hence the most challenging factor is to determine a forwarding strategy which will provide the schedule for each node for transmission within the channel. In this research work we have tried to implement two forwarding strategies for the multi path multi radio WMN as the approximate solution for the above said problem. We have implemented Global State Routing (GSR) which will consider the packet forwarding concept and Aggregation Aware Layer 2 Routing (AAL2R) which considers the both concept i.e. both packet forwarding and packet aggregation. After the successful implementation the network performance has been measured by means of simulation study.
Fuzzy Optimized Metric for Adaptive Network RoutingCSCJournals
Network routing algorithms used today calculate least cost (shortest) paths between nodes. The cost of a path is the sum of the cost of all links on that path. The use of a single metric for adaptive routing is insufficient to reflect the actual state of the link. In general, there is a limitation on the accuracy of the link state information obtained by the routing protocol. Hence it becomes useful if two or more metrics can be associated to produce a single metric that can describe the state of the link more accurately. In this paper, a fuzzy inference rule base is implemented to generate the fuzzy cost of each candidate path to be used in routing the incoming calls. This fuzzy cost is based on the crisp values of the different metrics; a fuzzy membership function is defined. The parameters of these membership functions reflect dynamically the requirement of the incoming traffic service as well as the current state of the links in the path. And this paper investigates how three metrics, the mean link bandwidth, queue utilization and the mean link delay, can be related using a simple fuzzy logic algorithm to produce a optimized cost of the link for a certain interval that is more „precise‟ than either of the single metric, to solve routing problem .
Transfer reliability and congestion control strategies in opportunistic netwo...IEEEFINALYEARPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09849539085, 09966235788 or mail us - ieeefinalsemprojects@gmail.co¬m-Visit Our Website: www.finalyearprojects.org
Tree Based Proactive Source Routing Protocol for MANETspaperpublications3
bstract: A mobile adhoc network (MANET) is a wireless communication network and the node that does not lie within the direct transmission range of each other depends on the intermediate nodes to forward data. Opportunistic data forwarding has not been widely utilized in mobile adhoc networks (MANETs) and the main reason is the lack of an efficient lightweight proactive routing scheme with strong source routing capability. PSR protocol facilitates opportunistic data forwarding in MANETs. In PSR, each node maintains a breadth-first search spanning tree of the network rooted at it-self. This information is periodically exchanged among neighboring nodes for updated network topology information. Here added a Mobile sink to reduce the overhead in case of number of child node increases and also to reduce the delay.
Routing performance of structured overlay in Distributed Hash Tables (DHT) fo...journalBEEI
This paper presents a routing performance analysis of structured P2P overlay network. Due to the rapid development and hectic life, sharing data wirelessly is essential. P2P allows participating peers move freely by joining and leaving the network at any convenience time. Therefore, it exists constraint when one measuring the network performance. Moreover, the design of structured overlay networks is fragmented and with various design. P2P networks need to have a reliable routing protocol. In order to analyse the routing performance, this work simulates three structured overlay protocols-Chord, Pastry and Kademlia using OMNeT++ with INET and OverSim module. The result shows that Pastry is the best among others with 100% routing efficiency. However, Kademlia leads with 12.76% and 18.78% better than Chord and Pastry in lookup hop count and lookup success latency respectively. Hence, Pastry and Kamelia architectures will have a better choice for implementing structured overlay P2P network.
AN EFFECTIVE CONTROL OF HELLO PROCESS FOR ROUTING PROTOCOL IN MANETSIJCNCJournal
In the mobile ad hoc network (MANET) update of link connectivity is necessary to refresh the neighbor tables in data transfer. A existing hello process periodically exchanges the link connectivity information, which is not adequate for dynamic topology. Here, slow update of neighbour table entries causes link failures which affect performance parameter as packet drop, maximum delay, energy consumption, and reduced throughput. In the dynamic hello technique, new neighbour nodes and lost neighbour nodes are used to compute link change rate (LCR) and hello-interval/refresh rate (r). Exchange of link connectivity information at a fast rate consumes unnecessary bandwidth and energy. In MANET resource wastage can be controlled by avoiding the re-route discovery, frequent error notification, and local repair in the entire network. We are enhancing the existing hello process, which shows significant improvement in performance.
Token Based Packet Loss Control Mechanism for NetworksIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
Centrality-Based Network Coder Placement For Peer-To-Peer Content DistributionIJCNCJournal
Network coding has been shown to achieve optimal multicast throughput, yet at an expensive computation
cost: every node in the network has to code. Interested in minimizing resource consumption of network
coding while maintaining its performance, in this paper, we propose a practical network coder placement
algorithm which achieves comparable content distribution time as network coding, and at the same time,
substantially reduces the number of network coders compared to a full network coding solution in which all
peers have to encode, i.e. become encoders. Our algorithm is derived from two key elements. First, it is
based on the insight that coding at upstream peers eliminates information duplication to downstream peers,
which results in efficient content distribution. Second, our placement strategy exploits centrality
characteristics of the network topology to quickly determine key positions to place encoders. Performance
evaluation using various topology and algorithm parameters confirms the effectiveness of our proposed
method.
THE IMPACT OF NODE MISBEHAVIOR ON THE PERFORMANCE OF ROUTING PROTOCOLS IN MANETIJCNCJournal
MANET is a cooperative wireless network in which mobile nodes are responsible for routing and
forwarding packets from and to other nodes. Noncooperation is a challenge that definitely degrades the
performance of MANET. A misbehaving or selfish node may make use of other nodes in the network, but
decline to share its own resources with them. These selfish nodes may severely affect the performance of
routing protocols in MANET.
In this paper, we compare the performance of four routing protocols under security attack of node
misbehavior in MANET. We investigate AODV and DSR reactive routing protocols and OLSR and GRP
proactive routing protocols using Riverbed Modeler simulator. The performance comparison is carried out
using two types of misbehaving nodes. The metrics used are End-to-End delay, Packet Delivery Ratio, Data
dropped and the Load. The experimental results show that AODV routing protocol performs better than the
other routing protocols with higher packet delivery ratio. Further, OLSR routing protocol outperforms the
other routing protocols with minimum End-to-End delay.
Influence of Clustering on the Performance of MobileAd Hoc Networks (MANETs)Narendra Singh Yadav
Clustering is an important research area for mobile ad hoc networks (MANETs) as it increases the capacity of network, reduces the routing overhead and makes the network more scalable in the presence of both high mobility and a large number of mobile nodes. Routing protocols based on flat topology are not scalable because of their built-in characteristics. However, clustering cause overhead which consumes considerable bandwidth, drain mobile nodes energy quickly, likely cause congestion, collision and data delay in larger networks. This paper uses an implementation of the Dynamic Source Routing (DSR), an flat architecture based and the Cluster Based Routing Protocol (CBRP), a cluster architecture based routing protocol to examine the influence of clustering on the performance of mobile ad hoc networks. This paper evaluates channel utilization and control overhead as a function of number of nodes per sq. km to show the effect of clustering. Simulation results show that in high mobility scenarios, CBRP outperforms DSR. CBRP scales well with increasing number of nodes.
IMPLEMENTATION AND COMPARISION OF DATA LINK QUALITY SCHEME ON ODMRP AND ADMR ...ijngnjournal
An ad hoc network is a collection of wireless mobile nodes dynamically forming a temporary network without the use of any fixed network infrastructure or centralized administration. In order to enable communication within the network, a routing protocol is needed to discover routes between nodes. The primary goal of ad hoc network routing protocols is to establish routes between node pairs so that messages may be delivered reliably and in a timely manner. The objective of any routing protocol is to have packet delivered with least possible cost in terms of receiving power, transmission power, battery energy consumption and distance. All these factors basically effect the establishment of link between the mobile nodes and liability and stability of these links. In this paper, we implement a data link quality scheme on two protocols ODMRP and ADMR and compare them on the bases link quality and link stability.
Flbra fuzzy logic based routing algorithm for indoor wireless sensor networksijcsit
Considering the context of building management systems with wireless sensor networks monitoring
environmental features, this paper presents a proposal of a Fuzzy Logic Based Routing Algorithm (FLBRA)
to determine the cost of each link and the identification of the best routes for packet forwarding. We
describe the parameters (Received Signal Strength Indicator - RSSI, Standard Deviation of the RSSI and
Packet Error Rate - PER) for the cost definition of each path, the sequence of identifying best routes and
the results obtained in simulation. As expected in this proposal, the simulation results showed an increase
in the packet delivery rate compared to RSSI-based forward protocol (RBF).
Spatial ReusabilityAware Routing in Multi-Hop Wireless Networks Using Single ...dbpublications
In Multi-hop wireless routing to successfully achieve high end to end throughput .To search a “best” node path from source node to the destination node .A large number of routing protocols use for minimum total transmission count/time for delivering a single packet, such transmission time minimizing protocols cannot be assured to successfully achieve maximum end to end throughput. Considering spatial reusability of the wireless media, increase the end-to-end throughput in multi-hop wireless network. To support a function in spatial reusability-aware Single path routing (SAAP) protocols, It compare with existing protocols, Results provide desired end to end throughputgain is up to 62.7%. and desired end to end delay.
Cost Effective Routing Protocols Based on Two Hop Neighborhood Information (2...Eswar Publications
Ad hoc networks are collections of mobile nodes communicating with each other using wireless media without any fixed infrastructure. During both route discovery and traversal of route-reply packets from destination to source,
broadcast of packets is required which incurs huge message cost. The present article deals with the message cost
reduction during transmission of route-reply from destination to source. Also the redundancy that is visible within the 2-hop neighborhood of a node is minimized during broadcasting of route-reply. This improves the average lifetime of network nodes by decreasing the possibility of network partition. The scheme of 2NI can be used with any reactive routing protocol in MANETs.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Performance Evaluation of a Layered WSN Using AODV and MCF Protocols in NS-2csandit
In layered networks, reliability is a major concern
as link failures at lower layer will have a
great impact on network reliability. Failure at a l
ower layer may lead to multiple failures at the
upper layers which deteriorate the network performa
nce. In this paper, the scenario of such a
layered wireless sensor network is considered for A
d hoc On-Demand Distance Vector (AODV)
and Multi Commodity Flow (MCF) routing protocols. M
CF is
developed using
polynomial time
approximation algorithms for the failure polynomial
. Both protocols are compared in terms of
different network parameters such as throughput, pa
cket loss and end to end delay. It was
shown that the network reliability is better when M
CF protocol is used. It was also shown that
maximizing the min cut of the layered network maxim
izes reliability in the terms of successful
packet transmission of network. Thetwo routing prot
ocolsare implemented in the scenario of
discrete network event simulator NS-2.
DETERMINING THE NETWORK THROUGHPUT AND FLOW RATE USING GSR AND AAL2Rijujournal
In multi-radio wireless mesh networks, one node is eligible to transmit packets over multiple channels to
different destination nodes simultaneously. This feature of multi-radio wireless mesh network makes high
throughput for the network and increase the chance for multi path routing. This is because the multiple
channel availability for transmission decreases the probability of the most elegant problem called as
interference problem which is either of interflow and intraflow type. For avoiding the problem like
interference and maintaining the constant network performance or increasing the performance the WMN
need to consider the packet aggregation and packet forwarding. Packet aggregation is process of collecting
several packets ready for transmission and sending them to the intended recipient through the channel,
while the packet forwarding holds the hop-by-hop routing. But choosing the correct path among different
available multiple paths is most the important factor in the both case for a routing algorithm. Hence the
most challenging factor is to determine a forwarding strategy which will provide the schedule for each
node for transmission within the channel. In this research work we have tried to implement two forwarding
strategies for the multi path multi radio WMN as the approximate solution for the above said problem. We
have implemented Global State Routing (GSR) which will consider the packet forwarding concept and
Aggregation Aware Layer 2 Routing (AAL2R) which considers the both concept i.e. both packet forwarding
and packet aggregation. After the successful implementation the network performance has been measured
by means of simulation study.
DETERMINING THE NETWORK THROUGHPUT AND FLOW RATE USING GSR AND AAL2Rijujournal
In multi-radio wireless mesh networks, one node is eligible to transmit packets over multiple channels to
different destination nodes simultaneously. This feature of multi-radio wireless mesh network makes high
throughput for the network and increase the chance for multi path routing. This is because the multiple
channel availability for transmission decreases the probability of the most elegant problem called as
interference problem which is either of interflow and intraflow type. For avoiding the problem like
interference and maintaining the constant network performance or increasing the performance the WMN
need to consider the packet aggregation and packet forwarding. Packet aggregation is process of collecting
several packets ready for transmission and sending them to the intended recipient through the channel,
while the packet forwarding holds the hop-by-hop routing. But choosing the correct path among different
available multiple paths is most the important factor in the both case for a routing algorithm. Hence the
most challenging factor is to determine a forwarding strategy which will provide the schedule for each
node for transmission within the channel. In this research work we have tried to implement two forwarding
strategies for the multi path multi radio WMN as the approximate solution for the above said problem. We
have implemented Global State Routing (GSR) which will consider the packet forwarding concept and
Aggregation Aware Layer 2 Routing (AAL2R) which considers the both concept i.e. both packet forwarding
and packet aggregation. After the successful implementation the network performance has been measured
by means of simulation study.
Tree Based Proactive Source Routing Protocol for MANETspaperpublications3
bstract: A mobile adhoc network (MANET) is a wireless communication network and the node that does not lie within the direct transmission range of each other depends on the intermediate nodes to forward data. Opportunistic data forwarding has not been widely utilized in mobile adhoc networks (MANETs) and the main reason is the lack of an efficient lightweight proactive routing scheme with strong source routing capability. PSR protocol facilitates opportunistic data forwarding in MANETs. In PSR, each node maintains a breadth-first search spanning tree of the network rooted at it-self. This information is periodically exchanged among neighboring nodes for updated network topology information. Here added a Mobile sink to reduce the overhead in case of number of child node increases and also to reduce the delay.
Routing performance of structured overlay in Distributed Hash Tables (DHT) fo...journalBEEI
This paper presents a routing performance analysis of structured P2P overlay network. Due to the rapid development and hectic life, sharing data wirelessly is essential. P2P allows participating peers move freely by joining and leaving the network at any convenience time. Therefore, it exists constraint when one measuring the network performance. Moreover, the design of structured overlay networks is fragmented and with various design. P2P networks need to have a reliable routing protocol. In order to analyse the routing performance, this work simulates three structured overlay protocols-Chord, Pastry and Kademlia using OMNeT++ with INET and OverSim module. The result shows that Pastry is the best among others with 100% routing efficiency. However, Kademlia leads with 12.76% and 18.78% better than Chord and Pastry in lookup hop count and lookup success latency respectively. Hence, Pastry and Kamelia architectures will have a better choice for implementing structured overlay P2P network.
AN EFFECTIVE CONTROL OF HELLO PROCESS FOR ROUTING PROTOCOL IN MANETSIJCNCJournal
In the mobile ad hoc network (MANET) update of link connectivity is necessary to refresh the neighbor tables in data transfer. A existing hello process periodically exchanges the link connectivity information, which is not adequate for dynamic topology. Here, slow update of neighbour table entries causes link failures which affect performance parameter as packet drop, maximum delay, energy consumption, and reduced throughput. In the dynamic hello technique, new neighbour nodes and lost neighbour nodes are used to compute link change rate (LCR) and hello-interval/refresh rate (r). Exchange of link connectivity information at a fast rate consumes unnecessary bandwidth and energy. In MANET resource wastage can be controlled by avoiding the re-route discovery, frequent error notification, and local repair in the entire network. We are enhancing the existing hello process, which shows significant improvement in performance.
Token Based Packet Loss Control Mechanism for NetworksIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
Centrality-Based Network Coder Placement For Peer-To-Peer Content DistributionIJCNCJournal
Network coding has been shown to achieve optimal multicast throughput, yet at an expensive computation
cost: every node in the network has to code. Interested in minimizing resource consumption of network
coding while maintaining its performance, in this paper, we propose a practical network coder placement
algorithm which achieves comparable content distribution time as network coding, and at the same time,
substantially reduces the number of network coders compared to a full network coding solution in which all
peers have to encode, i.e. become encoders. Our algorithm is derived from two key elements. First, it is
based on the insight that coding at upstream peers eliminates information duplication to downstream peers,
which results in efficient content distribution. Second, our placement strategy exploits centrality
characteristics of the network topology to quickly determine key positions to place encoders. Performance
evaluation using various topology and algorithm parameters confirms the effectiveness of our proposed
method.
THE IMPACT OF NODE MISBEHAVIOR ON THE PERFORMANCE OF ROUTING PROTOCOLS IN MANETIJCNCJournal
MANET is a cooperative wireless network in which mobile nodes are responsible for routing and
forwarding packets from and to other nodes. Noncooperation is a challenge that definitely degrades the
performance of MANET. A misbehaving or selfish node may make use of other nodes in the network, but
decline to share its own resources with them. These selfish nodes may severely affect the performance of
routing protocols in MANET.
In this paper, we compare the performance of four routing protocols under security attack of node
misbehavior in MANET. We investigate AODV and DSR reactive routing protocols and OLSR and GRP
proactive routing protocols using Riverbed Modeler simulator. The performance comparison is carried out
using two types of misbehaving nodes. The metrics used are End-to-End delay, Packet Delivery Ratio, Data
dropped and the Load. The experimental results show that AODV routing protocol performs better than the
other routing protocols with higher packet delivery ratio. Further, OLSR routing protocol outperforms the
other routing protocols with minimum End-to-End delay.
Influence of Clustering on the Performance of MobileAd Hoc Networks (MANETs)Narendra Singh Yadav
Clustering is an important research area for mobile ad hoc networks (MANETs) as it increases the capacity of network, reduces the routing overhead and makes the network more scalable in the presence of both high mobility and a large number of mobile nodes. Routing protocols based on flat topology are not scalable because of their built-in characteristics. However, clustering cause overhead which consumes considerable bandwidth, drain mobile nodes energy quickly, likely cause congestion, collision and data delay in larger networks. This paper uses an implementation of the Dynamic Source Routing (DSR), an flat architecture based and the Cluster Based Routing Protocol (CBRP), a cluster architecture based routing protocol to examine the influence of clustering on the performance of mobile ad hoc networks. This paper evaluates channel utilization and control overhead as a function of number of nodes per sq. km to show the effect of clustering. Simulation results show that in high mobility scenarios, CBRP outperforms DSR. CBRP scales well with increasing number of nodes.
IMPLEMENTATION AND COMPARISION OF DATA LINK QUALITY SCHEME ON ODMRP AND ADMR ...ijngnjournal
An ad hoc network is a collection of wireless mobile nodes dynamically forming a temporary network without the use of any fixed network infrastructure or centralized administration. In order to enable communication within the network, a routing protocol is needed to discover routes between nodes. The primary goal of ad hoc network routing protocols is to establish routes between node pairs so that messages may be delivered reliably and in a timely manner. The objective of any routing protocol is to have packet delivered with least possible cost in terms of receiving power, transmission power, battery energy consumption and distance. All these factors basically effect the establishment of link between the mobile nodes and liability and stability of these links. In this paper, we implement a data link quality scheme on two protocols ODMRP and ADMR and compare them on the bases link quality and link stability.
Flbra fuzzy logic based routing algorithm for indoor wireless sensor networksijcsit
Considering the context of building management systems with wireless sensor networks monitoring
environmental features, this paper presents a proposal of a Fuzzy Logic Based Routing Algorithm (FLBRA)
to determine the cost of each link and the identification of the best routes for packet forwarding. We
describe the parameters (Received Signal Strength Indicator - RSSI, Standard Deviation of the RSSI and
Packet Error Rate - PER) for the cost definition of each path, the sequence of identifying best routes and
the results obtained in simulation. As expected in this proposal, the simulation results showed an increase
in the packet delivery rate compared to RSSI-based forward protocol (RBF).
Spatial ReusabilityAware Routing in Multi-Hop Wireless Networks Using Single ...dbpublications
In Multi-hop wireless routing to successfully achieve high end to end throughput .To search a “best” node path from source node to the destination node .A large number of routing protocols use for minimum total transmission count/time for delivering a single packet, such transmission time minimizing protocols cannot be assured to successfully achieve maximum end to end throughput. Considering spatial reusability of the wireless media, increase the end-to-end throughput in multi-hop wireless network. To support a function in spatial reusability-aware Single path routing (SAAP) protocols, It compare with existing protocols, Results provide desired end to end throughputgain is up to 62.7%. and desired end to end delay.
Cost Effective Routing Protocols Based on Two Hop Neighborhood Information (2...Eswar Publications
Ad hoc networks are collections of mobile nodes communicating with each other using wireless media without any fixed infrastructure. During both route discovery and traversal of route-reply packets from destination to source,
broadcast of packets is required which incurs huge message cost. The present article deals with the message cost
reduction during transmission of route-reply from destination to source. Also the redundancy that is visible within the 2-hop neighborhood of a node is minimized during broadcasting of route-reply. This improves the average lifetime of network nodes by decreasing the possibility of network partition. The scheme of 2NI can be used with any reactive routing protocol in MANETs.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Performance Evaluation of a Layered WSN Using AODV and MCF Protocols in NS-2csandit
In layered networks, reliability is a major concern
as link failures at lower layer will have a
great impact on network reliability. Failure at a l
ower layer may lead to multiple failures at the
upper layers which deteriorate the network performa
nce. In this paper, the scenario of such a
layered wireless sensor network is considered for A
d hoc On-Demand Distance Vector (AODV)
and Multi Commodity Flow (MCF) routing protocols. M
CF is
developed using
polynomial time
approximation algorithms for the failure polynomial
. Both protocols are compared in terms of
different network parameters such as throughput, pa
cket loss and end to end delay. It was
shown that the network reliability is better when M
CF protocol is used. It was also shown that
maximizing the min cut of the layered network maxim
izes reliability in the terms of successful
packet transmission of network. Thetwo routing prot
ocolsare implemented in the scenario of
discrete network event simulator NS-2.
DETERMINING THE NETWORK THROUGHPUT AND FLOW RATE USING GSR AND AAL2Rijujournal
In multi-radio wireless mesh networks, one node is eligible to transmit packets over multiple channels to
different destination nodes simultaneously. This feature of multi-radio wireless mesh network makes high
throughput for the network and increase the chance for multi path routing. This is because the multiple
channel availability for transmission decreases the probability of the most elegant problem called as
interference problem which is either of interflow and intraflow type. For avoiding the problem like
interference and maintaining the constant network performance or increasing the performance the WMN
need to consider the packet aggregation and packet forwarding. Packet aggregation is process of collecting
several packets ready for transmission and sending them to the intended recipient through the channel,
while the packet forwarding holds the hop-by-hop routing. But choosing the correct path among different
available multiple paths is most the important factor in the both case for a routing algorithm. Hence the
most challenging factor is to determine a forwarding strategy which will provide the schedule for each
node for transmission within the channel. In this research work we have tried to implement two forwarding
strategies for the multi path multi radio WMN as the approximate solution for the above said problem. We
have implemented Global State Routing (GSR) which will consider the packet forwarding concept and
Aggregation Aware Layer 2 Routing (AAL2R) which considers the both concept i.e. both packet forwarding
and packet aggregation. After the successful implementation the network performance has been measured
by means of simulation study.
DETERMINING THE NETWORK THROUGHPUT AND FLOW RATE USING GSR AND AAL2Rijujournal
In multi-radio wireless mesh networks, one node is eligible to transmit packets over multiple channels to
different destination nodes simultaneously. This feature of multi-radio wireless mesh network makes high
throughput for the network and increase the chance for multi path routing. This is because the multiple
channel availability for transmission decreases the probability of the most elegant problem called as
interference problem which is either of interflow and intraflow type. For avoiding the problem like
interference and maintaining the constant network performance or increasing the performance the WMN
need to consider the packet aggregation and packet forwarding. Packet aggregation is process of collecting
several packets ready for transmission and sending them to the intended recipient through the channel,
while the packet forwarding holds the hop-by-hop routing. But choosing the correct path among different
available multiple paths is most the important factor in the both case for a routing algorithm. Hence the
most challenging factor is to determine a forwarding strategy which will provide the schedule for each
node for transmission within the channel. In this research work we have tried to implement two forwarding
strategies for the multi path multi radio WMN as the approximate solution for the above said problem. We
have implemented Global State Routing (GSR) which will consider the packet forwarding concept and
Aggregation Aware Layer 2 Routing (AAL2R) which considers the both concept i.e. both packet forwarding
and packet aggregation. After the successful implementation the network performance has been measured
by means of simulation study.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A Novel Path Tracing Scheme In All-Optical Networks Using Benes NetworkCSCJournals
A novel path tracing scheme is described in this paper which is known as Prime number encoding scheme using Benes network. In this scheme every data packet consist a label which is default 1 and every node consist of a prime number tag, as this data packet pass through the network label will be multiplied with the tag of the node. Prime number multiplication is done with encoder. At the receiver end factorization is done which gives the information of travelled path. In this scheme optical cross connects (OXC) is replaced with the Benes network which gives the better result than OXC. System having Benes network gives less attenuation than OXC and complexity of the system also decreases.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
The Impact of Signal Strength over Routing Protocols in Wireless NetworksDr. Amarjeet Singh
In ad hoc routing protocols the source node
may need an intermediate nodes to transmit the packets into
the destination if the destination is not within transmission
range of the source. This paper studies the impact of signal
strength of nodes over ad hoc routing protocols and explains
an important effect of signal strength on ad hoc routing
protocols in four different directions including the routes and
the nodes. As a result the study give an important
improvement in ad hoc routing protocols when using signal
strength compared to other ad hoc routing protocols without
considering signal strength.
Beaglebone Black Webcam Server For SecurityIJTET Journal
Web server security using BeagleBone Black is based on ARM Cortex-A8 processor and Linux operating system
is designed and implemented. In this project the server side consists of BeagleBone Black with angstrom OS and interfaced
with webcam. The client can access the web server by proper authentication. The web server displays the web page forms
like home, video, upload, settings and about. The home web page describes the functions of Web Pages. The video Web page
displays the saved videos in the server and client can view or download the videos. The upload web page is used by the client
to upload the files to server. The settings web page is used to change the username, password and date if needed. The about web page provides the description of the project
Biometrics Authentication Using Raspberry PiIJTET Journal
Biometric authentication is one of the most popular and accurate technology. Nowadays, it is used in many real time
applications. However, recognizing fingerprints in Linux based embedded computers (raspberry pi) is still a very complex problem.
This entire work is done on the Linux based embedded computer called raspberry pi , in which database creation and management
using postgresql, web page creation using PHP language, fingerprint reader access, authentication and recognition using python were
entirely done on raspberry pi This paper discusses on the standardized authentication model which is capable of extracting the
fingerprints of individual and store that in database . Then I use the final fingerprint to match with others in fingerprints present in the
database (postgresql) to show the capability of this model.
Conceal Traffic Pattern Discovery from Revealing Form of Ad Hoc NetworksIJTET Journal
Number of techniques has been planned supported packet secret writing to safeguard the
communication in MANETs. STARS functioning supported stastical characteristics of captured raw traffic.
STARS discover the relationships of offer to destination communication. To forestall STAR attack associate
offer hidding technique is introduced.The pattern aims to derive the source/destination probability distribution.
that's the probability for each node to entire traffic captured with link details message source/destination and
conjointly the end-to-end link probability distribution that's the probability for each strive of nodes to be
associate end-to-end communication strive. thence construct point-to-point traffic originate and then derive the
end-to-end traffic with a set of traffic filtering rules; thus actual traffic protected against revelation attack.
Through this protective mechanism efficiency of traffic enlarged by ninety fifth from attacked traffic. For a lot of
sweetening to avoid overall attacks second shortest path is chosen.
Node Failure Prevention by Using Energy Efficient Routing In Wireless Sensor ...IJTET Journal
The most necessary issue that has to be solved in coming up with an information transmission rule for
wireless unplanned networks is a way to save unplanned node energy whereas meeting the wants of applications
users because the unplanned nodes are battery restricted. Whereas satisfying the energy saving demand, it’s
conjointly necessary to realize the standard of service. Just in case of emergency work, it's necessary to deliver the
information on time. Achieving quality of service in is additionally necessary. So as to realize this demand, Power -
efficient Energy-Aware routing protocol for wireless unplanned networks is planned that saves the energy by
expeditiously choosing the energy economical path within the routing method. When supply finds route to
destination, it calculates α for every route. The worth α is predicated on largest minimum residual energy of the trail
and hop count of the trail. If a route has higher α, then that path is chosen for routing the information. The worth of α
are higher, if the most important of minimum residual energy of the trail is higher and also the range of hop count is
lower. Once the trail is chosen, knowledge is transferred on the trail. So as to extend the energy potency any
transmission power of the nodes is additionally adjusted supported the situation of their neighbour. If the neighbours
of a node are closely placed thereto node, then transmission vary of the node is diminished. Thus it's enough for the
node to own the transmission power to achieve the neighbour at intervals that vary. As a result transmission power
of the node is cut back that later on reduces the energy consumption of the node. Our planned work is simulated
through Network machine (NS-2). Existing AODV and Man-Min energy routing protocol conjointly simulated
through NS-2 for performance comparison. Packet Delivery quantitative relation, Energy Consumption and end-toend
delay.
Prevention of Malicious Nodes and Attacks in Manets Using Trust worthy MethodIJTET Journal
In Manet the first demand is co-operative communication among nodes. The malicious nodes might cause security issues like grey hole and cooperative attacks. To resolve these attack issue planning Dynamic supply routing mechanism, that is referred as cooperative bait detection theme (CBDS) that integrate the advantage of each proactive and reactive defence design is used. In region attacks, a node transmits a malicious broadcast informing that it's the shortest path to the destination, with the goal of intercepting messages. During this case, a malicious node (so-called region node) will attract all packets by victimisation solid Route Reply (RREP) packet to incorrectly claim that “fake” shortest route to the destination then discard these packets while not forwarding them to the destination. In grey hole attacks, the malicious node isn't abs initio recognized in and of itself since it turns malicious solely at a later time, preventing a trust-based security resolution from detective work its presence within the network. It then by selection discards/forwards the info packets once packets undergo it. During this we have a tendency to focus is on detective work grey hole/collaborative region attacks employing a dynamic supply routing (DSR)-based routing technique.
Effective Pipeline Monitoring Technology in Wireless Sensor NetworksIJTET Journal
Wireless detector nodes are a promising technology to play three-dimensional applications. Even it
will sight correct lead to could on top of ground and underground. In solid underground watching system makes
some challenges are there to propagating the signals. The detector node is moving entire the underground
pipeline and sending information to relay node that's placed within the on top of ground. If any relay node is
unsuccessful during this condition suggests that it'll not sending the info. In this watching system can specially
designed as a heterogeneous networks. Every high power relay nodes most covers minimum 2 low power relay
node. If any relay node is unsuccessful within the network, the constellation can modification mechanically
supported the heterogeneous network. The high power relay node is change the unsuccessful node and sending
the condition of pipeline. The benefits are thought-about to be extremely distributed, improved packet delivery
Raspberry Pi Based Client-Server Synchronization Using GPRSIJTET Journal
A low cost Internet-based attendance record embedded system for students which uses wireless technology to
transfer data between the client and server is designed. The proposed system consist of a Raspberry Pi which acts as a
client which stores the details of the students in the database by using user login system using web. When the user logs
into the database the data is sent through GPRS to the server machine which maintains the records of the employees and
the attendance is updated in the server database. The GPRS module provides a bidirectional real-time data transfer
between the client and server. This system can be implemented to any real time application so as to retrieve information
from a data source of the client system and send a file to the remote server through GPRS. The main aim is to avoid the
limitations in Ethernet connection and design a low cost and efficient attendance record system where the data is
transferred in a secure way from the client database and updated in the server database using GPRS technology
ECG Steganography and Hash Function Based Privacy Protection of Patients Medi...IJTET Journal
Data hiding can hide sensitive information into signals for covert communication. Most data hiding
techniques will distort the signal in order to insert additional messages. The distortion is often small; the irreversibility is
not admissible to some sensitive techniques. Most of the applications, lossless data hiding is desired to extract the
embedded data and the original host signal. The project proposes the enhancement of protection system for secret data
communication through encrypted data concealment in ECG signals of the patient. The proposed encryption technique
used to encrypt the confidential data into unreadable form and not only enhances the safety of secret carrier information by
making the information inaccessible to any intruder having a random method. For that we use twelve square ciphering
techniques. The technique is used make the communication between the sender and the receiver to be authenticated is hash
function. To evaluate the effectiveness of ECG wave at the proposed technique, distortion measurement techniques of two
are used, the percentage residue difference (PWD) and wavelets weighted PRD. Proposed technique provides high security protection for patient data with low distortion is proven in this proposed system.
An Efficient Decoding Algorithm for Concatenated Turbo-Crc CodesIJTET Journal
In this paper, a hybrid turbo decoding algorithm is used, in which the outer code, Cyclic Redundancy Check code is
not used for detection of errors as usual but for error correction and improvement. This algorithm effectively combines the iterative
decoding algorithm with Rate-Compatible Insertion Convolution Turbo Decoding, where the CRC code and the turbo code are
regarded as an integrated whole in the Decoding process. Altogether we propose an effective error detecting method based on
normalized Euclidean distance to compensate for the loss of error detection capability which should have been provided by CRC
code. Simulation results show that with the proposed approach, 0.5-2dB performance gain can be achieved for the code blocks
with short information length
Improved Trans-Z-source Inverter for Automobile ApplicationIJTET Journal
In this paper a new technology is proposed with a replacement of conventional voltage source/current
source inverter with Improved Trans-Z-source inverter in automobile applications. The improved Trans-Z-source
inverter has a high boost inversion capability and continues input current. Also this new inverter can suppress the
resonant current at the startup; this resonant current in the startup may lead the device to permanent damage. In
improved Trans-Z-source inverter a couple inductor is needed, instead of this coupled inductor a transformer is used.
By using a transformer with sufficient turns ratio the size can be reduced. The turn’s ratio of the transformer decides
the input voltage of the inverter. In this paper operating principle, comparison with conventional inverters, working
with automobiles simulation results, THD analysis, Hardware implementation using ATMEGA 328 P are included.
Wind Energy Conversion System Using PMSG with T-Source Three Phase Matrix Con...IJTET Journal
This paper presents an analysis of a PMSG wind power system using T-Sourcethree phase matrix converter. PMSG using T-Source three phase matrix converterhas advantages that it can provide any desired AC output voltage regardless of DC input with regulation in shoot-through time. In this control system T-Source capacitor voltage can be kept stable with variations in the shoot-through time, maximum power from the wind turbine to be delivered. Inaddition, of a new future, the converter employs a safe-commutation strategy toconduct along a continuous current flow, which results in theelimination of voltage spikes on switches without the need for a snubber circuit. With the use of matrix converter the surely need forrectifier circuit and passive components to store energy arereduced. The MATLAB/Simulinkmodel of the overall system is carried out and theoretical wind energy conversion output load voltage calculations are madeand feasibility of the new topology has been verified and that theconverter can produce an output voltage and output current. This proposed method has greater efficiency and lower cost.
Optimizing Data Confidentiality using Integrated Multi Query ServicesIJTET Journal
Query services have experienced terribly massive growth within past few years for that reason large usage of services need to balance outsourcing data management to Cloud service providers that provide query services to the client for data owners, therefore data owner needs data confidentiality as well as query privacy to be guaranteed attributable to disloyal behavior of cloud service provider consequently enhancing data confidentiality must not be compromise the query processed performance. It is not significant to provide slow query services as the result of security along with privacy assurance. We propose the random space perturbation data perturbation method to provide secure with kNN(k-nearest-neighbor) range query services for protecting data in the cloud and Frequency Structured R-Tree (FSR-Tree) efficient range query. Our schemes enhance data confidentiality without compromising the FSR-TREE query processing performance that also increases the user experience.
Foliage Measurement Using Image Processing TechniquesIJTET Journal
Automatic detection of fruit and leaf diseases is essential to automatically detect the symptoms of diseases as early as they appear on the growing stage. This system helps to detect the diseases on fruit during farming , right from plan and easily monitoring the diseases of grapes leaf and apple fruit. By using this system we can avoid the economical loss due to various diseases in agriculture production. K-means clustering technique is used for segmentation. The features are extracted from the segmented image and artificial neural network is used for training the image database and classified their performance to the respective disease categories. The experimental results express that what type of disease can be affected in the fruit and leaf .
Harmonic Mitigation Method for the DC-AC Converter in a Single Phase SystemIJTET Journal
This project suggest a sine-wave modulation technique is to achieve a low total harmonic distortion of Buck-Boost converter connected to a changing polarity inverter in a system. The suggested technique improves the harmonic content of the output. In addition, a proportional-resonant Integral controller is used along with harmonic compensation techniques for eliminating the DC component in the system. Also, the performance of the Proposed controller is analyzed when it connecting to the converter. The design of Buck-Boost converter is fed by modulated sine wave Pulse width modulation technique are proposed to mitigate the low order harmonics and to control the output current. So, that the output complies within the standard limit without use of low pass filter.
Comparative Study on NDCT with Different Shell Supporting StructuresIJTET Journal
Natural draft cooling towers are very essential in modern days in thermal and nuclear power stations. These are the hyperbolic shells of revolution in form and are supported on inclined columns. Several types of shell supporting structures such as A,V,X,Y are being used for construction of NDCT’s. Wind loading on NDCT governs critical cases and requires attention. In this paper a comparative study on reinforcement details has been done on NDCT’s with X and Y shell supporting structures. For this purpose 166m cooling tower with X and Y supporting structures being analyzed and design for wind (BS & IS code methods), seismic loads using SAP2000.
Experimental Investigation of Lateral Pressure on Vertical Formwork Systems u...IJTET Journal
The modeling of pressure distribution of fresh concrete poured in vertical formwork are rather dynamic than complex. Many researchers had worked on the pressure distribution modeling of concrete and formulated empirical relationship factors like formwork height, rate of pour, consistency classes of concrete. However, in the current scenario, most of high rise construction uses self compacting concrete(SCC) which is a special concrete which utilizes not only mineral and chemical admixtures but also varied aggregate proportions and hence modeling pressure distribution of SCC over other concrete in vertical formwork systems is necessitated. This research seeks to bridge the gap between the theoretical formulation of pressure distribution with the actual modeled (scaled) vertical formwork systems. The pressure distribution of SCC in the laboratory will be determined using pressure sensors, modeled and analyzed.
A Five – Level Integrated AC – DC ConverterIJTET Journal
This paper presents the implementation of a new five – level integrated AC – DC converter with high input power factor and reduced input current harmonics complied with IEC1000-3-2 harmonic standards for electrical equipments. The proposed topology is a combination of boost input power factor pre – regulator and five – level DC – DC converter. The single – stage PFC (SSPFC) approach used in this topology is an alternative solution to low – power and cost – effective applications.
A Comprehensive Approach for Multi Biometric Recognition Using Sclera Vein an...IJTET Journal
Sclera and finger print vein fusion is a new biometric approach for uniquely identifying humans. First, Sclera vein is identified and refined using image enhancement techniques. Then Y shape feature extraction algorithm is used to obtain Y shape pattern which are then fused with finger vein pattern. Second, Finger vein pattern is obtained using CCD camera by passing infrared light through the finger. The obtained image is then enhanced. A line shape feature extraction algorithm is used to get line patterns from enhanced finger vein image. Finally Sclera vein image pattern and Finger vein image pattern were combined to get the final fused image. The image thus obtained can be used to uniquely identify a person. The proposed multimodal system will produce accurate results as it combines two main traits of an individual. Therefore, it can be used in human identification and authentication systems.
Study of Eccentrically Braced Outrigger Frame under Seismic ExitationIJTET Journal
Outrigger braced structures has efficient structural form consist of a central core, comprising braced frames with
horizontal cantilever ”outrigger” trusses or girders connecting the core to the outer column. When the structure is loaded
horizontally, vertical plane rotation of the core is restrained by the outriggers through tension in windward column and
compression in leeward column. The effective structural depth of the building is greatly increased, thus augmenting the lateral
stiffness of the building and reducing the lateral deflections and moments in core. In effect, the outriggers join the columns to the
core to make the structure behave as a partly composite cantilever. By providing eccentrically braced system in outrigger frame by
varying the size of links and analyzing it. Push over analysis is carried out by varying the link size using computer programs, Sap
2007 to understand their seismic performance. The ductile behavior of eccentrically braced frame is highly desirable for structures
subjected to strong ground motion. Maximum stiffness, strength, ductility and energy dissipation capacity are provided by
eccentrically braced frame. Studies were conducted on the use of outrigger frame for the high steel building subjected to
earthquake load. Braces are designed not to buckle, regardless of the severity of lateral loading on the frame. Thus eccentrically
braced frame ensures safety against collapse.
Enhanced Hashing Approach For Image Forgery Detection With Feature Level FusionIJTET Journal
Image forgery detection and its accuracy are addressed in the proposed work. The image authentication process aims at finding the originality of an image. Due to the advent of many image editing software image tampering has become common. The Enhanced hashing approach is suggested for image authentication. The concept of Hashing has been used for searching images from large databases. It can also be applied to image authentication as it produces different results with respect to the change in image. But the hashing methods used for similarity searches cannot be used for image authentication since they are no sensitive for small changes. Moreover, we need a system that detects only perceptual changes. A new hashing method, namely, enhanced robust hashing is proposed for image authentication, which uses global and local properties of an image. This method is developed for detecting image forgery, including removal, insertion, and replacement of objects, and abnormal color modification, and for locating the forged area. The local models include position and texture information of object regions in the image. The hash mechanism uses secret keys for encryption and decryption. IP tracing is done to track the suspicious nodes.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Comprehensive Path Quality Measurement in Wireless Sensor Networks
1. INTERNATIONAL JOURNAL FOR TRENDS IN ENGINEERING & TECHNOLOGY
VOLUME 5 ISSUE 2 – MAY 2015 - ISSN: 2349 - 9303
78
Comprehensive Path Quality
Measurement in Wireless Sensor Networks
N.Mohanraj1
1
PG Scholar, Department of Computer Science and Engineering,
Paavai Engineering College,
nmohanraj92@gmail.com
G.Mahalakshmi2
2
Associate Professor, Department of Computer Science and
Engineering, Paavai Engineering College,
gmahalakshmi@rediffmail.com
Abstract— A wireless sensor network mostly relies on multi-hop transmissions to deliver a data packet. It is of essential importance
to measure the quality of multi-hop paths and such information shall be utilized in designing efficient routing strategies. Existing
metrics like ETF, ETX mainly focus on quantifying the link performance in between the nodes while overlooking the forwarding
capabilities inside the sensor nodes. By combining the QoF measurements within a node and over a link, we are able to
comprehensively measure the intact path quality in designing efficient multihop routing protocols. We propose QoF, Quality of
Forwarding, a new metric which explores the performance in the gray zone inside a node left unattended in previous studies. We
implement QoF and build a modified Collection Tree Protocol.
Index Terms—Path quality, node quality, quality of forwarding.
————————————————————
1 INTRODUCTION
Wireless Sensor Network (WSN) is typically designed to span
in a large field for data collection. Data delivery is usually
achieved with multi-hop transmission along a sequence of
nodes. Many multi-hop routing protocols have been proposed for
WSN data collection and they usually incorporate special path
estimation metrics to select “good “paths for delivering data packets.
There have been many estimation metrics proposed to measure the
forwarding quality of a multi-hop path. Existing metrics mainly
focus on estimating the packet delivery quality on links in between
the nodes.
The quality of forwarding capacity along a path is estimated by
the aggregate of the forwarding qualities of all the links on the path.
Those link based metrics while reflect the link performance of the
path, however, overlook the forwarding capabilities inside the sensor
nodes, thus resulting in an incomplete measurement of the path
quality. Using the incomplete path indicators will lead to suboptimal
routing decisions and degraded routing performance. Such an effect
has been revealed in our experience in manipulatingGreen Orbs, a
large-scale sensor network with 330 nodes. In current routing
implementation in Green Orbs, we use a modified Collection Tree
Protocol (CTP) that relies on path ETX estimation for routing
selection. During the field test of the system, we observe a portion of
packets drops on some nodes.
They are due to a variety of causes, such as forwarding queue
overflow under high traffic pressure, software bugs in the CTP
implementation, and etc. Those nodes, however, still respond with
ACKs at the radio hardware. The bad fact is that with current path
indicators the inability of packet forwarding within the individual
nodes cannot be shared among the network, yet there is not a metric
to quantify the packet forwarding quality at each node. As a result,
the path estimation not always truly reflects the path quality and the
data delivery performance is severely degraded. The packet drops on
the problematic nodes introduce intrinsic unreliability in data
delivery. As a matter of fact, even a single link itself can hardly
achieve full reliability. ETX over a link measures the expected
number of transmissions for successfully delivering a packet, but
transmitting the packet at the expected number of times does not
guarantee it will be successfully received at the receiver end.
Impractical systems, a maximum number of retransmissions are
usually set on a link to prevent sending a packet on a“bad “link
infinitely that exhausts the finite communication resources. The
packet will be eventually dropped by the sender after a maximum
number of transmissions retries. The network is thus rendered
unreliable due to both node unreliability and link unreliability. ETX
of a path is estimated as the summation of ETX values over all links
constituting the path. Using path-ETX for path selection minimizes
the transmission cost and achieves a high throughput. However,ETX
presumes that end-to-end delivery is reliable which; however, the
truth is not always as we see from the above. For data delivery
within the network of inherent unreliability, a metric that better
measures the data productivity is the amount of successful data
delivery to the destination,i.e., data yield. Data yield over the actual
number of data Transmissions, measures both transmission cost as
well as achieved throughput. Existing path-ETX does not capture
such a parameter. There are two paths, both of which have path-
ETXof 20.
Suppose the link layer transmission retries is set to 1.In path 1,
the probability that a packet passes the first link is1
10 þ ð1 _ 1
10Þ _ 1
10 ¼ 0:19. Similarly, the probability that a packet passes the second
link is 0.19. Therefore, the probability that the packet passes the path
(path reliability) is 0:19 _ 0:19 ¼ 0:0361, i.e., 361 packets will be
received if the source sends 10,000 packets. In path 2, however, the
path
Reliability is 1 _ ð1
19 þ ð1 _ 1
19Þ _ 1
A
2. INTERNATIONAL JOURNAL FOR TRENDS IN ENGINEERING & TECHNOLOGY
VOLUME 5 ISSUE 2 – MAY 2015 - ISSN: 2349 - 9303
79
19Þ ¼ 0:1025, i.e., 1,025 packets will be received if the source sends
10,000 packets. This implies that ETX fails to Capture the path
reliability. The situation will be similar if we further consider a
higher number of transmissions retries as well as node unreliability.
Routing based on path-ETX does not give the optimal delivery path
in terms of the data yield per transmission. In this work, we
comprehensively investigate the unreliability in both links and
nodes. We present QoF, a new metric which estimates the chances
for a packet to pass both a link and a node. The link-QoF not only
considers the transmission cost at the sender but also considers the
data delivery ratio at the receiver. The node-QoF estimates the
quality of forwarding within a node, and it plays an important role in
differentiating the problematic nodes. Based on link- QoF/node-QoF,
we aggregate the QoF measure over a path (Path-QoF). The path-
QoF metric estimates the intact path forwarding quality and it
considers both transmission cost and end-to-end data delivery ratio.
The QoF metric measures the data yield over the actual number of
data transmissions. Hence using such a metric can greatly improve
the data yield while having a low transmission overhead. The
contributions of this paper are summarized as follows. First, we
reveal the limitations of existing link based indicators like ETX and
ETF in estimating the intact path forwarding quality. In a practical
system, routing selection based on ETX may lead to severely
degraded data yield. Second, we propose a new metric QoF to
measure the path quality. QoF can be used to estimate the forwarding
quality over a link or within a node. Using QoF, we are able to
characterize both the transmission cost and the data delivery ratio
along a forwarding path. Third, we implement QoF based on Tiny
OS 2.1 and incorporate it into CTP. We evaluate the QoF based
routing performance in a test bed consisting of 50 TelosB nodes. The
results show that using the QoF metric improves the data yield while
reducing the per-successful delivery cost.
2RELATED WORKS
The quality of packet forwarding is a fundamental factor in
sensor networks, which has been studied in a number of works. Such
a factor can be estimated on different dimensions over the
communication in between nodes, for example, received signal
strength (RSS), transmission delay, packet reception ratio (PRR), etc.
Those parameters are measured at different layers across the
communication stacks.
At the physical layer, RSSI and LQI are two most widely used
parameters that describe the communicational quality between
nodes. Both RSSI and LQI reflect the physical quality of the wireless
channel in between the nodes, though as suggested in, the two
parameters are not adequate to represent the quality of packet
forwarding over the link.
At the link layer, many other metrics have been proposed. ETX
measures the expected number of transmissions for successfully
delivering a packet over the link. Specifically, if we denote df as the
probability that a packet is successfully received and dr as the reverse
probability that the link ACK can be successfully received. The ETX
value over a link is then calculated as df _1 dr. Another metric ETF is
designed for links of high asymmetry. ETF suggests that though the
reverse link quality is low, the ACK still has a high probability being
received by the sender. ETOP considers the impact of link positions
to the path quality. It presents an algorithm to find the path with
minimal ETOP value. Designed for wireless mesh networks, ETOP
does not consider the unreliable forwarding quality of sensor nodes.
In addition, it requires that the source determines the entire
forwarding path to the destination, which is not suitable for the
WSNs with unreliable and time-varying links. There are some other
link layer metrics, such as expected transmission time, competence,
LNT, ENT, end-to-end success rate, required number of packets,
EDR, etc. Among the aforementioned link estimation metrics, ETX
is the most widely used one. ETX has worked as the de facto link
quality indicator and has been used for a variety of wireless
protocols. Currently, ETX estimation has been integrated into CTP,
for reliable and efficient data collection in WSNs.
3 MOTIVATION AND BACKGROUND
This work is mainly motivated from the experience in manipulating
a real-world system, Green Orbs, deployed in the wild. During the
experiment, we observe substantial packet loss on a number of nodes
that cannot be characterized by existing path estimation metrics. We
first give a brief description on the system architecture of Green
Orbs. We then present our basic observations on packet loss, which
reveals the grey zone of packet drops within the sensor node. We
take a close look at the packet losses with the work flow of the
packet forwarding in the software implementation on a sensor node.
Fig. 1. Integrating QoF with CTP and Layer structure of QoF implementation.
3.1 GreenOrbs System
Green Orbs is a sensor network system for supporting a variety
of forestry applications, such as canopy closure estimates, fire risk
evaluation, microclimate monitoring, and carbon dioxide
measurement. The latest deployment of Green Orbs system consists
of 330 nodes in the wood-land. It has been in operation since
December 2009. Green Orbs uses the TelosB mote with MSP430
processor and CC2420 transceiver. We develop the program based on
Tiny OS 2.1. Currently, Green Orbs operates with a synchronized
low duty cycling mechanism and employs CTP for data collection. A
maximum of 30 retransmissions are provided to improve link layer
reliability. In order to record the behaviors and performance of
packet forwarding within a sensor node at a fine granularity, we
modified the CTP component, recording all related events as well as
some statistical information. The solid arrows stand for the data flow
and dashed arrows stand for the control flow.
3. INTERNATIONAL JOURNAL FOR TRENDS IN ENGINEERING & TECHNOLOGY
VOLUME 5 ISSUE 2 – MAY 2015 - ISSN: 2349 - 9303
80
Fig. 2. Component graph of GreenOrbs implementation.
3.2 Basic Observations
We present the outdoor test bed results over 330 Nodes that
motivate our work. As used in, we use network yield to measure the
quality of data collection of the network. The network yield
measures the quantity of data received at the sink with respect to the
total data generated by all nodes in the network. The network yield
can be calculated by
Yield = # of data pkts received at the sink during w
# of data pkts sent by all nodes during w
The network yield gives us the good put of the network, reflecting
both forwarding reliability and the throughput.During the
measurement, we vary the network size. The network yield for
different network sizes. We see from theStatistics that there are about
22_40 per cent data lost in the multi-hop data collection when the
network scales from100 to 330. We further look into the lost packets
that packet loss is quite common and a small portion of nodes
experience excessively high packet losses. The packet loss here is
mainly due to two real reason is transmission timeout on the links
(exceeding the retransmission threshold); and the second reason is
local packet drops within the node which are mainly due to
receive/transmit queue overflow, memory routing loops, packet
duplication, and program bugs (e.g., race conditions) etc. We will
take a closer look at the causes of packet loss at individual sensor
nodes.
Fig. 3. The work flow of packet forwarding on a sensor node.
3.3 Anatomy of Packet Loss
3.3.1 Packet loss within a node
To understand the causes of packet loss, we take a close look
into the work flow on a node that forwards a packet. The flow starts
with the node perceiving the physical wave that carries the packet
from the sender. It ends when the node gets an ACK from the next-
hop receiver or the number of retransmissions reaches the limit.
We can see from Fig. 3 that there exists a gray zone in the work flow,
spanning across the network, and application layers. Existing path
estimators only measure the forwarding quality of packets outside
the gray zone. The packet is presumed passing through the gray zone
100 percent successful. According to aforementioned observations,
how-ever, there is a probability for a packet to get lost when it is
processed in the gray zone. Though CTP uses software ACK and
beacon message to measure link quality, it cannot effectively capture
the gray zone and its impact to the entire path. Though the working
flow is for CTP protocol, this can also be applied to routing protocols
with similar steps.
We conduct experiments on a 50-node test bed. We summarize the
occurrence of several causes that lead to packet drops. The receiver
queue overflow is due to the resource constraint on sensor nodes.
The packets duplicate suppression is due to the fact that routing layer
information is not timely updated. Task failure is caused by the OS
mechanism that does not allow the same task to be posted twice if
the former one has not been finished. The send done failure is due to
the mismatch of number of successfully send operations and number
of send done events.
The above anatomy reveals that overlooking the existence of the
gray zone inside the sensor node is likely to cause mismatch between
the path estimation and the real forwarding capacity of the path.
Thus we shall care-fully estimate such an unreliable factor in the
gray zone and use it as an important indicator to select “good” paths
for data delivery.
We propose node-QoF to measure the instant node forwarding
quality and take it into consideration in building optimized routing
paths.
Fig. 4. Different causes of packet loss on sensor nodes.
3.3.2 Packet Loss over
Another observation is that transmission timeout is common and
accounts for a large portion of packet Drops. For a 100-hour data set
collected from the 330-node net-work, the transmission timeout
4. INTERNATIONAL JOURNAL FOR TRENDS IN ENGINEERING & TECHNOLOGY
VOLUME 5 ISSUE 2 – MAY 2015 - ISSN: 2349 - 9303
81
accounts for 61.08 per cent of all packet drops while the remaining
packet loss is due to intra-node unreliability. This is the result
collected from a network with a relatively high retransmission
threshold of 30 in CTP. For lower values of the retransmission
threshold, the problem will be more severe. As the example
illustrates, ETX based routing will treat both paths equally good
because both paths have a path-ETX of 20. However, in considering
data delivery reliability, path 2 is obviously better than path 1 as it
delivers about two times more Packets. ETX, which works well in
reducing the transmission cost when end-to-end delivery is presumed
highly reliable, may not be necessarily appropriate for improving the
end-to-end reliability of data delivery.
Fig. 5. CDF of node PDR for under high traffic and low traffic.
4 EVALUATION
4.1 Methodology
We use a test bed network consisting of 50 TelosB nodes to
evaluate the efficacy of our design. Each node is attached with a
USB wire to reprogram the node. In our experiments, data are
collected from the network to the sink, the left-bottom node, and
then sent to the base station, which is usually a PC. We integrate QoF
with CTP (CTP-QoF) for evaluating the performance of QoF in
supporting the routing. In the network, we set the power level of the
transmissions to 1 to construct a multi-hop network. We mainly
compare CTP-QoF with the original CTP protocol (CTP-ETX) in
following two cases.
Case I. Streaming application case. In this case, we set the
retransmission threshold to 1 and the transmission frequency per
node to 3 Hz. In such a case, we explore the performance of QoF in
supporting data streaming applications that pursue low latency and
high traffic throughput without reliability guarantee on individual
packets.
Case II. Real world deployment case. In this case, we set the
retransmission threshold to 30 and the transmission frequency per
node to 3 Hz, which is the same with our set-tings in the real-world
deployment. Based on our experience with Green Orbs, we use a
program version before Jan 10th 2010, with some “faulty” nodes that
drop a portion of incoming packets. Some faulty nodes can still
report QoF to its neighbouring nodes while other nodes may keep
silent all the time.
Fig. 6. The picture of test bed.
5 CONCLUSION
Comprehensive and accurate measurement of path quality is an
essential and crucial factor in founding an efficient routing
mechanism for multi hop wireless sensor networks. Existing
approaches for path quality Estimation emphasize link quality in
between in nodes, but overlook the end-to-end data delivery ratio
and the node Unreliability. This paper presents our experience with
Green Orbs, which suggests that the existing metrics fail to make
comprehensive measurement of path quality. Our proposal called
QoF, overcomes this limitation by simultaneously considering node
forwarding quality and link quality based on a generic link model. As
analysed and demonstrated by the experiments, routing decisions
yielded with QoF achieve low traffic cost as well as high end-to-end
delivery ratio.
6 REFERENCES
[1] D. Couto, D. Aguayo, J. Bicket, and R. Morris, “A High-
Throughput Path Metric for Multi-Hop Wireless Routing,” Proc.
ACM MobiCom, 2003.
[2] L. Sang, A. Arora, and H. Zhang, “On Exploiting Asymmetric
Wireless Links Via One-Way Estimation,” Proc. ACM MobiHoc,
2007.
[3] G. Jakllari, S. Eidenbenz, N. Hengartner, S. Krishnamurthy, and
M. Faloutsos, “Link Positions Matter: A Noncommutative Routing
Metric for Wireless Mesh Networks,” Proc. IEEE INFOCOM, 2008.
[4] L. Mo, Y. He, Y. Liu, J. Zhao, S. Tang, X. Li, and G. Dai,
“Canopy Closure Estimates with Green Orbs: Sustainable Sensing in
the Forest,” Proc. Seventh ACM Conf. Embedded Networked Sensor
Systems (SenSys), 2009.
[5] G. Werner-Allen, K. Lorincz, J. Johnson, J. Lees, and M. Welsh,
“Fidelity and Yield in a Volcano Monitoring Sensor Network,” Proc.
USENIX Seventh Symp. Operating Systems Design and
Implementation (USENIX OSDI), 2006.
[6] CTP TEP, http://www.tinyos.net/tinyos-2.x/doc/html/
tep123.html, 2013.
[7] TinyOS, http://www.tinyos.net, 2013.
[8] O. Gnawali, R. Fonseca, K. Jamieson, D. Moss, and P. Levis,
“Collection Tree Protocol,” Proc. Seventh ACM Conf. Embedded
Networked Sensor Systems (SenSys), 2009.
[9] J. Polastre, R. Szewczyk, and D. Culler, “Telos: Enabling Ultra-
Low Power Wireless Research,” Proc. ACM/IEEE Fourth Int’l
Symp. Information Processing in Sensor Networks (IPSN), 2007.
5. INTERNATIONAL JOURNAL FOR TRENDS IN ENGINEERING & TECHNOLOGY
VOLUME 5 ISSUE 2 – MAY 2015 - ISSN: 2349 - 9303
82
[10] K. Srinivasan and P. Levis, “RSSI is under Appreciated,” Proc.
Third Workshop on Embedded Networked Sensors (EmNets), 2006.
[11] S. Lin, G. Zhou, K. Whitehouse, Y. Wu, J. Stankovic, and T. He,
“Towards Stable Network Performance in Wireless Sensor
Networks,” Proc. IEEE 30th Real- Time Systems Symp. (RTSS),
2009.
[12] H. Zhang, L. Sang, and A. Arora, “Comparison of Data-Driven
Link Estimation Methods in Low-Power Wireless Networks,” IEEE
Trans. Mobile Computing, vol. 9, no. 11, pp. 1634-1648, Nov. 2010.
[13] R. Draves, J. Padhye, and B. Zill, “Comparison of Routing
Metrics for Static Multi-Hop Wireless Networks,” ACM SIGCOMM
Computer Comm. Rev., vol. 34, no. 4, pp. 133-144, 2004.
[14] O. Gnawali, M. Yarvis, J. Heidemann, and R. Govindan,
“Interaction of Retransmission, Blacklisting, and Routing Metrics for
Reliability in Sensor Network Routing,” Proc. IEEE First Ann.
Comm. Soc. Conf. Sensor and Ad Hoc Comm. And Networks
(SECON), 2004.
[15] A. Cerpa, J. Wong, M. Potkonjak, and D. Estrin, “Temporal
Properties of Low Power Wireless Links: Modeling and Implications
on Multi-Hop Routing,” Proc. ACM MobiHoc, 2005.
[16] Y. Gu and T. He, “Data Forwarding in Extremely Low Duty-
Cycle Sensor Networks with Unreliable Communication Links,”
Proc. ACM Fifth Int’l Conf. Embedded Networked Sensor Systems
(SenSys), 2007.
[17] S. Biswas and R. Morris, “ExOR: Opportunistic Multi-Hop
Routing for Wireless Networks,” Proc. ACM SIGCOMM, 2005.
[18] S. Chachulski, M. Jennings, S. Katti, and D. Katabi, “Trading
Structure for Randomness in Wireless Opportunistic Routing,” Proc.
ACM SIGCOMM, 2007.
[19] A. Sridharan, B. Krishnamachari, “Explicit and Precise Rate
Control for Wireless Sensor Networks,” Proc. ACM Seventh Conf.
Embedded Networked Sensor Systems (SenSys), 2009.
[20] T. Schmid, R.S. Shea, Z.M. Charbiwala, J. Friedman, Y.H. Cho,
and M.B. Srivastava, “On the Interaction of Clocks, Power, and Syn-
chronization in Duty-Cycled Embedded Sensor Nodes,” ACM Trans.
Sensor Networks , vol. 7 article 24, 2010.
[21] Z. Li, W. Chen, C. Li, M. Li, X.yang Li, and Y. Liu, “Flight:
Clock Calibration Using Fluorescent Lighting,” Proc. ACM
MOBICOM, 2012.
AUTHOR PROFILE
Mohanraj.N is currently pursuing master degree program in
Department of Computer Science and Engineering in Paavai
Engineering College. E-mail: nmohanraj92@gmail.com
Mahalakshmi.Gis working as a Associate Professor in
Department of Computer Science and Engineering in Paavai
Engineering College. E-mail: gmahalakshmi@rediffmail.com