Comparison of Non-real-time and Real-time Simulators with Relays-in-the-Loop for Adaptive Overcurrent Protection

•

1 like•319 views

By Emilio C. Piesciorovsky, Kansas State College of Engineering and Noel N. Schulz, Tennessee tech Learn more at www.opal-rt.com

Engineering

Towards cloud-based real-time HIL for wide-area special control and protection system testing Presented by: Jean Belanger, President and CTO of OPAL-RT TECHNOLOGIES Abstract: High penetration of inverter-based Distributed Energy Resources (DERs), widespread installation of FACTS and HVDC interconnection systems, and the decommissioning of thermal and nuclear plants are significantly reducing inertia in large-scale power systems. Fast power-electronics based control and protection schemes act to stabilize these systems, but they are sensitive to harmonics, transients, and system imbalances. It has been shown that simplified positive-sequence RMS models alone are insufficient for Transient Stability Assessment (TSA) of large-scale, low-inertia power grids. Therefore, utilities and regulators such as NERC, as well as professional associations such as CIGRE and IEEE, have begun investigating detailed EMT simulation to assess the transient stability of large-scale, low-inertia power grids that include power-electronic plant controllers. However, detailed EMT simulation of large-scale power grids for 20 to 30 second time-frames and hundreds of contingencies presents a number of computational and analytic challenges including excessive simulation time, large-scale grid data management and the unavailability of detailed and validated models of power-electronic plant controllers. Furthermore, these plant controllers, if they are provided by OEMs, are in the form of blackbox, pre-compiled DLLs, which are implemented for specific simulation tools, without any interoperability standard. This presentation will describe OPAL-RT solutions to achieve very large-scale, detailed grid EMT simulation in real-time for Hardware-in-the-Loop (HIL) / Software-in-the-Loop (SIL) control and protection testing, as well as quasi-real-time simulation for fast TSA evaluation of large-scale, low-inertia power systems. With these solutions, blackboxcontrol and protection systems can be implemented natively in the EMT simulation tool, HYPERSIM. PSCAD DLLs can also be co-simulated with HYPERSIM using a software interface based on the CIGRE model-interoperability guidelines. Such advances will accelerate connection studies and can be used to implement cloud-native tools to help operators assess system stability with hundreds of contingencies in 5-to 10-minute time-frames. This performance can be achieved for grids having several thousand busses with a 50-microsecond time-step using a few hundred processors. As HYPERSIM runs under Windows or LINUX, powerful cloud-based applications can be implemented for TSA and to test wide area control and protection systems using SIL or HIL with real control and protection software and hardware. Communication system emulators, such as eXata can also be used to analyze cyber-attacks and countermeasures as well as to evaluate the effect of communication failures and delays on system performance. Learn more at www.opal-rt.com

RT15 Berkeley | ARTEMiS-SSN Features for Micro-grid / Renewable Energy Sourc...

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Requirements on Power Amplifiers and HIL Real-Time Processors...

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Real-Time Simulation of A Modular Multilevel Converter Based ...

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Power HIL Simulator (SimP) A prototype to develop a high band...

OPAL-RT TECHNOLOGIES

RT15 Berkeley | NI / OPAL-RT Power Electronics HIL Teaching Laboratory - Nati...

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Multi-Terminal Power Hardware-in-the-Loop Test-Bench for Powe...

OPAL-RT TECHNOLOGIES

RT15 Berkeley | End-to-End Simulation Solution for Smart Grids Applications -...

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Power Grid Simulation and Beyond at PNNL

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Optimized Power Flow Control in Microgrids - Sandia Laboratory

OPAL-RT TECHNOLOGIES

Viewers also liked

RT15 Berkeley | ePHASORsim: Real-time transient stability simulation tool - O...

OPAL-RT TECHNOLOGIES

OPAL-RT | Setup and Performance of a Combined Hardware-in-loop and Software-i...

OPAL-RT TECHNOLOGIES

OPAL-RT and RTDS Technologies Co-Simulation

OPAL-RT TECHNOLOGIES

RT15 Berkeley | OPAL-RT Solutions for Microgrid Applications

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Real-time simulation as a prime tool for Cybersecurity - OPAL-RTOPAL-RT TECHNOLOGIES

Webinar | HIL Testing of Electric Transportation

OPAL-RT TECHNOLOGIES

RT15 Berkeley | Introduction to FPGA Power Electronic & Electric Machine real...

OPAL-RT TECHNOLOGIES

Lab-Scale MMC Test Bench

OPAL-RT TECHNOLOGIES

Webinar | HIL-based Wide-area Monitoring, Protection and Control R&D and Testing

OPAL-RT TECHNOLOGIES

Rapid Control Prototyping Solutions

OPAL-RT TECHNOLOGIES

Microgrid Controller HIL Demonstration Platform

OPAL-RT TECHNOLOGIES

Power Grid Cybersecurity

OPAL-RT TECHNOLOGIES

Viewers also liked (12)

RT15 Berkeley | ePHASORsim: Real-time transient stability simulation tool - O...

OPAL-RT | Setup and Performance of a Combined Hardware-in-loop and Software-i...

OPAL-RT and RTDS Technologies Co-Simulation

RT15 Berkeley | OPAL-RT Solutions for Microgrid Applications

RT15 Berkeley | Real-time simulation as a prime tool for Cybersecurity - OPAL-RT

Webinar | HIL Testing of Electric Transportation

RT15 Berkeley | Introduction to FPGA Power Electronic & Electric Machine real...

Lab-Scale MMC Test Bench

Webinar | HIL-based Wide-area Monitoring, Protection and Control R&D and Testing

Rapid Control Prototyping Solutions

Microgrid Controller HIL Demonstration Platform

Power Grid Cybersecurity

Recently uploaded

Democratizing Fuzzing at Scale by Abhishek Arya

abh.arya

Presented at NUS: Fuzzing and Software Security Summer School 2024 This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.

block diagram and signal flow graph representation

Divya Somashekar

Final project report on grocery store management system..pdf

Kamal Acharya

In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services. Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options. In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website. This document will discuss each of the underlying technologies to create and implement an e- commerce website.

Forklift Classes Overview by Intella Parts

Intella Parts

ethical hacking-mobile hacking methods.ppt

Jayaprasanna4

AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf

SamSarthak3

Standard Reomte Control Interface - Neometrix

Neometrix_Engineering_Pvt_Ltd

About Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol. • Remote control: Parallel or serial interface. • Compatible with MAFI CCR system. • Compatible with IDM8000 CCR. • Compatible with Backplane mount serial communication. • Compatible with commercial and Defence aviation CCR system. • Remote control system for accessing CCR and allied system over serial or TCP. • Indigenized local Support/presence in India. • Easy in configuration using DIP switches. Technical Specifications Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol. Key Features Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol. • Remote control: Parallel or serial interface • Compatible with MAFI CCR system • Copatiable with IDM8000 CCR • Compatible with Backplane mount serial communication. • Compatible with commercial and Defence aviation CCR system. • Remote control system for accessing CCR and allied system over serial or TCP. • Indigenized local Support/presence in India. Application • Remote control: Parallel or serial interface. • Compatible with MAFI CCR system. • Compatible with IDM8000 CCR. • Compatible with Backplane mount serial communication. • Compatible with commercial and Defence aviation CCR system. • Remote control system for accessing CCR and allied system over serial or TCP. • Indigenized local Support/presence in India. • Easy in configuration using DIP switches.

CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptx

R&R Consult

CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems! Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected. R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production. An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred. R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance. Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production. It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call! Work done in cooperation with James Malloy and David Moelling from Tetra Engineering. More examples of our work https://www.r-r-consult.dk/en/cases-en/

TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSE

DuvanRamosGarzon1

CME397 Surface Engineering- Professional Elective

karthi keyan

Water Industry Process Automation and Control Monthly - May 2024.pdf

Water Industry Process Automation & Control

Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control. In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.

ethical hacking in wireless-hacking1.ppt

Jayaprasanna4

Top 10 Oil and Gas Projects in Saudi Arabia 2024.pdf

Teleport Manpower Consultant

COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdf

Kamal Acharya

The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.

Cosmetic shop management system project report.pdf

Kamal Acharya

Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry. Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks. Data file handling has been effectively used in the program. The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.

LIGA(E)11111111111111111111111111111111111111111.ppt

ssuser9bd3ba

Halogenation process of chemical process industries

MuhammadTufail242431

WATER CRISIS and its solutions-pptx 1234

AafreenAbuthahir2

MCQ Soil mechanics questions (Soil shear strength).pdf

Osamah Alsalih

Nuclear Power Economics and Structuring 2024

Massimo Talia