This document provides information about HBD Clean Surface Coated Panels produced by Beijing Hocreboard Building Materials Co.Ltd. It details the company contact information, production facilities, product specifications, advantages, installation methods, and important notes for storage and handling. The core product is a fiber cement board with a clean surface coating that offers properties like fire resistance, moisture resistance, insulation, and durability.
Economical eco friendly light-weight building blocks using waste paper - pape...Prakash Kumar Sekar
The major component in any construction activity is the cost of the material. In developing countries, the untapped or unused resources are needed to be identified for its potential use in the construction sectors. The one such resource is waste paper. Paper pulp added with cement and sand hardens and forms a light weight construction material called Papercrete, which satisfies many of the engineering properties needed for construction. Papercrete has advantages like low-cost, economical and it is eco-friendly. In this research, papercrete blocks are created and their engineering properties are studied. It is to be noted that under compression papercrete fails slowly in a ductile manner but there was no earlier reliable research findings relating compressive stress with compressive strain which is covered in this paper.
A ceramic is an inorganic compound, non-metallic, solid material comprising metal, non-metal or metalloid atoms primarily held in ionic and covalent bonds. This article gives an overview of ceramic materials from the point of view of materials science.
The crystallinity of ceramic materials ranges from highly oriented to semi-crystalline, vitrified, and often completely amorphous (e.g., glasses). Most often, fired ceramics are either vitrified or semi-vitrified as is the case with earthenware, stoneware, and porcelain. Varying crystallinity and electron consumption in the ionic and covalent bonds cause most ceramic materials to be good thermal and electrical insulators (extensively researched in ceramic engineering). With such a large range of possible options for the composition/structure of a ceramic (e.g. nearly all of the elements, nearly all types of bonding, and all levels of crystallinity), the breadth of the subject is vast, and identifiable attributes (e.g. hardness, toughness, electrical conductivity, etc.) are hard to specify for the group as a whole. General properties such as high melting temperature, high hardness, poor conductivity, high moduli of elasticity, chemical resistance and low ductility are the norm,[1] with known exceptions to each of these rules (e.g. piezoelectric ceramics, glass transition temperature, superconductive ceramics, etc.). Many composites, such as fiberglass and carbon fiber, while containing ceramic materials, are not considered to be part of the ceramic family.[2]
Polymeric tapes: What are the differences of PVC – Bitumen and PE – Butyl Rub...DEKOTEC GmbH
Since the 1950ies cold-applied polymeric tapes from DEKOTEC GmbH prevent worldwide buried pipelines against external corrosion. Polymeric tapes can consist of different materials: Mostly Polyvinyl Chloride (PVC) or Polyethylene (PE) carrier foils. See in the presentation which material is suitable and how it is used in pipelines corrosion prevention tapes!
Development of unfired bricks using industrial waste Sandeep Jain
A research project aimed at production of an unfired, non-structural, binder brick with 100% waste material, using fly ash, pond ash, coal cinder, & paper sludge along with lime and gypsum system to alleviate resources like coal, diesel, preservation of top soil, prevention of harmful emissions simultaneously managing the industrial waste.
Project Guide: Dr Shashank Bishnoi, Civil Engineering Department, IIT Delhi
Quality of construction material and durability of homebuiltify
Quality is an important factor in construction process. It depends upon the material used in construction process which ultimately affects the durability of home.
Done by Rock group, Ahmed bin Hanbal Independent secondary school for boys
Concrete is a composite material composed mainly of water, aggregate , and cement
We searched on the internet for a substance that prevent water to go inside the concrete and damage it or make some huge gaps.
Effect of varying temperatures on the quality of concrete with 5% addition of...McKevin Ramduma
The high rate of building collapse in Nigeria has been a source of concern to
professionals and stakeholders in the building construction industry. Research has
shown that 100% of buildings collapsed in Nigeria were made from reinforced
concrete (Lekan, 2011). Cement which is a main binder in concrete production is
expensive particularly in developing countries like Nigeria, therefore increasing the
demand to explore pozzolanic potentials of clay. In the local construction industry,
shabby construction practices such as mixing concrete on the bare ground or the
deliberate addition of clay to concrete has effect on the properties of such concrete.
Fire hazards subject concrete structures to high temperature conditions which lead to
uneven expansion of the structure, causing cracks and eventually, failure of the
structure. High temperatures have effect on concrete properties such as appearance,
durability and compressive strength. Though extensive research has been done on the
effect of clay impurities on various properties of concrete, this project aims at
assessing the effect of varying temperatures on the properties of concrete containing
clay addition.
Fifteen 150mm×150mm×150mm samples of concrete cubes of mix ratio 1:2:4,
water/cement ratio of 0.45 and 5% clay addition were cast and cured for 28 days.
After curing, the samples were subjected to varying temperatures (100°C, 200°C,
300°C, 400°C and 500°C) and crushed. The findings from the results of the experiment
revealed that, concrete cube samples subjected to temperatures above 400°C failed to
meet the required 21N/mm2 compressive strength for normal weight concrete used for
structural purposes.
E-catalogue of Aluminum/Steel Composite Panel--KaiteerJane Lee
Brief introduction of Composite panel from Jiangsu Kaiteer New-Type Material Co., Ltd.
www.jskter.cn/ www.kaiteer.en.alibaba.com
contact: Jane Lee
Email: jane_kaiteer@hotmail.com
Phone:+86-18961097480
Economical eco friendly light-weight building blocks using waste paper - pape...Prakash Kumar Sekar
The major component in any construction activity is the cost of the material. In developing countries, the untapped or unused resources are needed to be identified for its potential use in the construction sectors. The one such resource is waste paper. Paper pulp added with cement and sand hardens and forms a light weight construction material called Papercrete, which satisfies many of the engineering properties needed for construction. Papercrete has advantages like low-cost, economical and it is eco-friendly. In this research, papercrete blocks are created and their engineering properties are studied. It is to be noted that under compression papercrete fails slowly in a ductile manner but there was no earlier reliable research findings relating compressive stress with compressive strain which is covered in this paper.
A ceramic is an inorganic compound, non-metallic, solid material comprising metal, non-metal or metalloid atoms primarily held in ionic and covalent bonds. This article gives an overview of ceramic materials from the point of view of materials science.
The crystallinity of ceramic materials ranges from highly oriented to semi-crystalline, vitrified, and often completely amorphous (e.g., glasses). Most often, fired ceramics are either vitrified or semi-vitrified as is the case with earthenware, stoneware, and porcelain. Varying crystallinity and electron consumption in the ionic and covalent bonds cause most ceramic materials to be good thermal and electrical insulators (extensively researched in ceramic engineering). With such a large range of possible options for the composition/structure of a ceramic (e.g. nearly all of the elements, nearly all types of bonding, and all levels of crystallinity), the breadth of the subject is vast, and identifiable attributes (e.g. hardness, toughness, electrical conductivity, etc.) are hard to specify for the group as a whole. General properties such as high melting temperature, high hardness, poor conductivity, high moduli of elasticity, chemical resistance and low ductility are the norm,[1] with known exceptions to each of these rules (e.g. piezoelectric ceramics, glass transition temperature, superconductive ceramics, etc.). Many composites, such as fiberglass and carbon fiber, while containing ceramic materials, are not considered to be part of the ceramic family.[2]
Polymeric tapes: What are the differences of PVC – Bitumen and PE – Butyl Rub...DEKOTEC GmbH
Since the 1950ies cold-applied polymeric tapes from DEKOTEC GmbH prevent worldwide buried pipelines against external corrosion. Polymeric tapes can consist of different materials: Mostly Polyvinyl Chloride (PVC) or Polyethylene (PE) carrier foils. See in the presentation which material is suitable and how it is used in pipelines corrosion prevention tapes!
Development of unfired bricks using industrial waste Sandeep Jain
A research project aimed at production of an unfired, non-structural, binder brick with 100% waste material, using fly ash, pond ash, coal cinder, & paper sludge along with lime and gypsum system to alleviate resources like coal, diesel, preservation of top soil, prevention of harmful emissions simultaneously managing the industrial waste.
Project Guide: Dr Shashank Bishnoi, Civil Engineering Department, IIT Delhi
Quality of construction material and durability of homebuiltify
Quality is an important factor in construction process. It depends upon the material used in construction process which ultimately affects the durability of home.
Done by Rock group, Ahmed bin Hanbal Independent secondary school for boys
Concrete is a composite material composed mainly of water, aggregate , and cement
We searched on the internet for a substance that prevent water to go inside the concrete and damage it or make some huge gaps.
Effect of varying temperatures on the quality of concrete with 5% addition of...McKevin Ramduma
The high rate of building collapse in Nigeria has been a source of concern to
professionals and stakeholders in the building construction industry. Research has
shown that 100% of buildings collapsed in Nigeria were made from reinforced
concrete (Lekan, 2011). Cement which is a main binder in concrete production is
expensive particularly in developing countries like Nigeria, therefore increasing the
demand to explore pozzolanic potentials of clay. In the local construction industry,
shabby construction practices such as mixing concrete on the bare ground or the
deliberate addition of clay to concrete has effect on the properties of such concrete.
Fire hazards subject concrete structures to high temperature conditions which lead to
uneven expansion of the structure, causing cracks and eventually, failure of the
structure. High temperatures have effect on concrete properties such as appearance,
durability and compressive strength. Though extensive research has been done on the
effect of clay impurities on various properties of concrete, this project aims at
assessing the effect of varying temperatures on the properties of concrete containing
clay addition.
Fifteen 150mm×150mm×150mm samples of concrete cubes of mix ratio 1:2:4,
water/cement ratio of 0.45 and 5% clay addition were cast and cured for 28 days.
After curing, the samples were subjected to varying temperatures (100°C, 200°C,
300°C, 400°C and 500°C) and crushed. The findings from the results of the experiment
revealed that, concrete cube samples subjected to temperatures above 400°C failed to
meet the required 21N/mm2 compressive strength for normal weight concrete used for
structural purposes.
E-catalogue of Aluminum/Steel Composite Panel--KaiteerJane Lee
Brief introduction of Composite panel from Jiangsu Kaiteer New-Type Material Co., Ltd.
www.jskter.cn/ www.kaiteer.en.alibaba.com
contact: Jane Lee
Email: jane_kaiteer@hotmail.com
Phone:+86-18961097480
Contents various materials that can be used for making false ceiling.
Such as acrylic sheets, pvc tiles, glass and mirror panels, acoustic panels, metal and wooden ceiling planks,cement fiber boards, gypsum boards, pop sheets ,etc.
Also contents different installation techniques of different materials.
Advantages and dis advantages can also be known along with market rates and availability.
Different styles of construction such as batten ceiling, plank ceiling, modular ceiling, designer ceiling,etc.
Comparison between two ceiling materials carrying out all most similar work.
Not to be confused with Oracle Database Vault (a commercial db security product), Data Vault Modeling is a specific data modeling technique for designing highly flexible, scalable, and adaptable data structures for enterprise data warehouse repositories. It is not a replacement for star schema data marts (and should not be used as such). This approach has been used in projects around the world (Europe, Australia, USA) for the last 10 years but is still not widely known or understood. The purpose of this presentation is to provide attendees with a detailed introduction to the technical components of the Data Vault Data Model, what they are for and how to build them. The examples will give attendees the basics for how to build, and design structures when using the Data Vault modeling technique. The target audience is anyone wishing to explore implementing a Data Vault style data model for an Enterprise Data Warehouse, Operational Data Warehouse, or Dynamic Data Integration Store. See more content like this by following my blog http://kentgraziano.com or follow me on twitter @kentgraziano.
A presentation covering various aspects of Real Estate and construction.
From choice and selection of materials to innovate use and selection of form work technologies. Such as plastic form work and Hybrid solutions. Also innovations in dry wall panels selection.
http://www.greenarchworld.com/
Concrete Canvas Cement Blanket Nuolian brand, structural name textile-reinforced concrete, it is one of the new inventions in the field of concrete structures which uses three-dimensional special textile structurefilled with dry concrete and additional polypropylene filaments which made it waterproof and flexible. The main advantages of cement blanket are easy to use, rapid dehydrating, low labour cost and easy transportation to remote areas.
Sangobuild stone-coated metal roof tiles are made with zinc-aluminum (Galvalume) steel which is tested to last 6-9 times longer than galvanized steel. And the tiles are coated with acrylic glue and natural sintered stone chips. So our stone-coated metal roof tiles have 50 years warranty and at least 20 years no color fading.
WhatsApp/Mob +86 189 6912 8012
Email: sgb11@sangobuild.cn
spc flooring is new generation flooring ,works better than lvt /wpc /laminate .
spc flooring is 100 % water proof ,durable ,stable ,easy to clean and install
utop spc flooring use 100 % virgin material ,the flooring is 100 % healthy .
Utop spc flooring quality is the best ,we are manufacturer and exporter of spc flooring .
cathy@bestspcfloor.com ,Mobile:+86 17798171469
www.bestspcfloor.com
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
2. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
2
Production Workshop
Production Line
Cutting Machine&Advanced roller coating equipment
Laboratory
3. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
3
Production Size:
Description UV Decorative Fiber Cement Board
Raw Materials Cement,Quartz Sand,Fiber
Standard Size 1220mm×2440mm/1200mm×2400mm
Max Width 1250mm
Max Length 3050mm
Thickness from 4mm-25mm
Density 1.4-1.8g/cm3
Color Any Color and Design
Water Content ≤10
Water Absorption ≤2.7%
Fire Resistance Incombustibility A Class(GB8624-A)
Thermal Conductivity Average≤0.20W/MK
Bending Strength Average 10-25Mpa
Radioactivity Conforming to GB6566-2001 A Class
Certification SGS,Intertek,ISO
Packing Wooden pallet
Trade Terms FOB NINGBO OR SHANGHAI, CNF, CIF
Payment T/T, L/C at sight
Leadtime 15 days after received your deposit
Main Characteristic
1:Excellent fire-proof performance
2:Excellent moisture-proof performance
3:Good heat and sound insulation
4:High strength
5:Stable dimensions
6:Durability and long service life ect
4. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
4
Product Structure
Reinforced Fiber Cement Board, Calcium silicate board are used as basis materials, processed by
special treatment technology technics;with texture of marble, wood,aluminum plastic board or
design of intelligent personality. It can be used and replaced nature marble, MDF,wooden plate,
ceramic facing tile and aluminum plastic plate etc... It is already widely used for exterior wall
facade and interior decorative all, such as tunnel, subway, airport, market place, hospital, office,
kitchen, bathroom,lab etc.....
Product advantage:
HBD CLEAN composite panels are manufactured with low energy and high environment
consciousness. 100% free of asbestos ,formaldehyde, benzene and other poisonous substances
and without radiation. It is fire and water proof, light and hard, thus the products are 100%
environmentally friendly. The proprietary processed pioneered by HBD CLEAN BOARD with
special surface treatment offers an increased scratch resistance and a higher UV resistance,
sealed edges and back coating ensure optimal behavior and durability of the panels.
5. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
5
1. Anti-aging and Weathering Resistant
It is guaranteed that the ultraviolet light resistant durable paint coat will not deform, not fading
within 20 years
2. Heat insulation
The performance of the heat insulation is 7 times better than ordinary mortar wall
6. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
6
3. Sound Absorption and Insulation
Noise is greatly reduces after using our panel
4. Anti-Graffiti
Most graffiti can be removed more than 1000 times by using acetone
5. Light Weight& Stable Dimensions
Exterior wall panel is lighter than mortar wall or nature marble panel, it can reduce the load of
the dwelling. High-Temperature high-pressure streaming method ensures stable dimensions and
non-deformation.
7. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
7
High-temperature High-pressure streaming method
A manufacturing method that features putting the raw sheet of
the building material for exterior decoration in a
high-temperature high-pressure kiln(water vapor of 160-170 ℃
and atmospheric pressure of 6-7 to make it fully harden.
If necessary use a suitable solvent to remove the staining agent,
then wash with containing a suitable wetting agent, and finally with acetone as required to clean
the surface.
9. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
9
Compared with Ceramic Tile
The specification of traditional ceramic is maximally about 800x800mm and the thickness ranges
from 8-12mm. The weight at least 24kg per square meter and increase the burden of a building.
HBD CLEAN BOARD is quite different from tile, it is large, thin, light, colorful and customized.
Specification maximally reached 1220x3600mm, and thickness from 4mm-20mm. The
magnetized surface is brighter and realer than ceramic and HBD CLEAN BOARD adopts special UV
fluorocarbon on the surface, it is not easy to adhere dirt and has self-cleaning function. In
addition, it is radiation-less, heat-resubmitting-impermeable, wearable,easy-installing etc...
Comparison Between HBD CLEAN BOARD with other decorative board
10. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
10
Solid Color Serious
1. The Production Process Of Solid Color Serious
Semi-finished Product
The production process of Semi-finished Product
Finished Product
The Production Process of Solid Color Board
Characteristics:
Pure elegant finished surface,Glossy and wear-resisting,easy-cleaning, pollution resistant,
hardness ≥5H
Use:
Replace aluminum plastic board or aluminum single board; because of indoor and outdoor wall
decoration can replace metal or glass
Remark: We can make any colors according to customers needs.
11. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
11
Marble Texture& Wood Texture Series
1. The production process of Marble Texture and Wood Texture Serious
Semi-finished Product.
The Production Process of Semi-finished Product
Finished Product
The Production Process of Film Transferred Board
Characteristics:
Effect of natural marble or wood, texture clear, color uniform, so it can avoid the chromatism of
natural in decoration for large area.Glossy and wear-resisting, easy-cleaning, pollution
resistance,hardness≥ 5H ,Eco-friendly, fireproof class A;light and radiation less;weight:1/5 of
nature marble;1/10 of nature marble.
Use:
Replace nature marble or stone, replace nature wood,used of indoor and outdoor wall
decoration, such as hotel lobby, lavatory, kitchen, TV background wall, shipping center, airport,
subway station, office.
Remark: We can make any colors and texture according to customers needs.
12. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
12
Installation Methods
Seam Connection
Installation And Construction(Seaming)
Plane Seaming
13. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
13
Angle Seaming
Processing Methods of The Board
Cutting
1.With a stone saw or electric cutting machine(used for sawing stone materials)
2.Pulling and pushing the NT cutter several times on the surface and back of the panel before
breaking it with the decoration surface facing outward. Then grind the surface of the fracture and
make it level.
14. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
14
Hole Drilling and Opening
Use the electric driller to drill the small hole. Use the hole saw to open the hole for installing wire
and pipe directly for drill some small holes first and then saw the hole
Installation Accessories
15. Beijing Hocreboard Building Materials Co.Ltd
Email:info@hocre-board.com Website:www.hocre-board.com
Tel: 86 10 62151268 Fax: 86 10 62151268 Direct Line: 86 15001321220
15
Attentions To Storage And Carrying
Make sure of the leveling handle of the board during installation, carrying and storage. Store at
the hard and flat ground/floor. Don’t carry the board by single person. Handle by 2 persons with
hands and make sure the level or vertical of board.
Case