More and more stack testers are turning to sorbent trap sampling to measure mercury emissions from a variety of industrial sources. New sorbent traps and protocols are also being developed to measure compounds like ammonia and hydrogen chloride. This presentation provides an overview of CleanAir's array of options for stack emission testing using sorbent traps...from purely manual no-frills samplers to a fully automated monitoring system.
MRU SWG 100 Fixed Biogas Analyzer is the rugged industrial analyzer to use with biogas & biomethane plants, landfill, water treatment as well as coal seam gas sites. Request a FREE quote today.
For efficient control of combustion and drying processes
Simultaneous or as individual measurement: the GM35 gas analyzer measures CO2, H2O and CO, or N2O, as well temperature and pressure – and it does this reliably, quickly, and economically. As an in-situ gas analyzer, the GM35 detects these gas components directly in the gas stream without gas sampling. Reliability, precision, and short response time of the GM35 offer a key advantage for efficient control loops in all CO and CO2-generating processes.
MRU SWG 100 Fixed Biogas Analyzer is the rugged industrial analyzer to use with biogas & biomethane plants, landfill, water treatment as well as coal seam gas sites. Request a FREE quote today.
For efficient control of combustion and drying processes
Simultaneous or as individual measurement: the GM35 gas analyzer measures CO2, H2O and CO, or N2O, as well temperature and pressure – and it does this reliably, quickly, and economically. As an in-situ gas analyzer, the GM35 detects these gas components directly in the gas stream without gas sampling. Reliability, precision, and short response time of the GM35 offer a key advantage for efficient control loops in all CO and CO2-generating processes.
Product presentation of (mini) CORI-FLOW instruments and applications of Bronkhorst Cori-Tech B.V., Ruurlo, The Netherlands showing instrument product specs and application examples, including dosing systems.
Changing Best Practices in Flue Gas AnalysisYokogawa1
Zirconium Oxide and Catalytic Bead sensor based analyzers have been the primary means of flue gas analysis for control and safety. The recently published API-556 has highlighted several considerations when using these technologies that were not commonly known throughout the industry. This webinar will explain the theory of operation of tunable diode laser spectrometers and the application thereof to gas fired reformers, boilers, & heaters as a layer of protection during startup and efficiency diagnostic during operation.
During this webinar recording, you will learn:
-What is the purpose of flue gas?
-The evolution of flue gas Analyzers
-Industry standards and recommended practices on the application of different types of instruments
Meet the demanding needs of high-purity water measurements and high-acid cation exchange applications with the Thermo Scientific™ Orion™ 2111XP Sodium Analyzer. This system offers unmatched reliability in analyzing critical sample streams throughout the power/steam generation and industrial water industry. It is an all-in-one system from one of the most trusted names in sodium monitoring.
An overview of diagnostic tools used in RESNET testingBill Spohn
Learn about the variety of tools and test instruments that apply in RESNET standards 310 (pending) and 380. We'll cover the proper procedures as well as pros and cons of various devices.
Heating, ventilation, and air conditioning is the technology of indoor and vehicular environmental comfort. Its goal is to provide thermal comfort and acceptable indoor air quality.
The 542 is a versatile, programmable gas
analyser, based on the principles of
thermal conductivity, capable of measuring
almost any combination of gases; hydrogen, helium, oxygen, carbon dioxide, methane, carbon monoxide, argon, nitrogen and many others.
Air pollution monitoring system using mobile gprs sensors array pptSaurabh Giratkar
ppt This paper contain brief introduction to vehicular pollution, effect of increase in vehicular pollution on environment as well on human health. To monitor this pollution wireless sensor network (WSN) system is proposed. The proposed system consists of a Mobile Data-Acquisition Unit (Mobile-DAQ) and a fixed Internet-Enabled Pollution Monitoring Server (Pollution-Server). The Mobile-DAQ unit integrates a single-chip microcontroller, air pollution sensors array, a General Packet Radio Service Modem (GPRS-Modem), and a Global Positioning System Module (GPS-Module). The Pollution-Server is a high-end personal computer application server with Internet connectivity. The Mobile-DAQ unit gathers air pollutants levels (CO, NO2, and SO2), and packs them in a frame with the GPS physical location, time, and date. The frame is subsequently uploaded to the GPRS-Modem and transmitted to the Pollution-Server via the public mobile network. A database server is attached to the Pollution- Server for storing the pollutants level for further usage by various clients such as environment protection agencies, vehicles registration authorities, and tourist and insurance companies.
Product presentation of (mini) CORI-FLOW instruments and applications of Bronkhorst Cori-Tech B.V., Ruurlo, The Netherlands showing instrument product specs and application examples, including dosing systems.
Changing Best Practices in Flue Gas AnalysisYokogawa1
Zirconium Oxide and Catalytic Bead sensor based analyzers have been the primary means of flue gas analysis for control and safety. The recently published API-556 has highlighted several considerations when using these technologies that were not commonly known throughout the industry. This webinar will explain the theory of operation of tunable diode laser spectrometers and the application thereof to gas fired reformers, boilers, & heaters as a layer of protection during startup and efficiency diagnostic during operation.
During this webinar recording, you will learn:
-What is the purpose of flue gas?
-The evolution of flue gas Analyzers
-Industry standards and recommended practices on the application of different types of instruments
Meet the demanding needs of high-purity water measurements and high-acid cation exchange applications with the Thermo Scientific™ Orion™ 2111XP Sodium Analyzer. This system offers unmatched reliability in analyzing critical sample streams throughout the power/steam generation and industrial water industry. It is an all-in-one system from one of the most trusted names in sodium monitoring.
An overview of diagnostic tools used in RESNET testingBill Spohn
Learn about the variety of tools and test instruments that apply in RESNET standards 310 (pending) and 380. We'll cover the proper procedures as well as pros and cons of various devices.
Heating, ventilation, and air conditioning is the technology of indoor and vehicular environmental comfort. Its goal is to provide thermal comfort and acceptable indoor air quality.
The 542 is a versatile, programmable gas
analyser, based on the principles of
thermal conductivity, capable of measuring
almost any combination of gases; hydrogen, helium, oxygen, carbon dioxide, methane, carbon monoxide, argon, nitrogen and many others.
Air pollution monitoring system using mobile gprs sensors array pptSaurabh Giratkar
ppt This paper contain brief introduction to vehicular pollution, effect of increase in vehicular pollution on environment as well on human health. To monitor this pollution wireless sensor network (WSN) system is proposed. The proposed system consists of a Mobile Data-Acquisition Unit (Mobile-DAQ) and a fixed Internet-Enabled Pollution Monitoring Server (Pollution-Server). The Mobile-DAQ unit integrates a single-chip microcontroller, air pollution sensors array, a General Packet Radio Service Modem (GPRS-Modem), and a Global Positioning System Module (GPS-Module). The Pollution-Server is a high-end personal computer application server with Internet connectivity. The Mobile-DAQ unit gathers air pollutants levels (CO, NO2, and SO2), and packs them in a frame with the GPS physical location, time, and date. The frame is subsequently uploaded to the GPRS-Modem and transmitted to the Pollution-Server via the public mobile network. A database server is attached to the Pollution- Server for storing the pollutants level for further usage by various clients such as environment protection agencies, vehicles registration authorities, and tourist and insurance companies.
Air Quality Sampling and Monitoring: Stack sampling, instrumentation and methods of analysis of SO2, CO etc, legislation for control of air pollution and automobile
pollution
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
The system is designed to test the performance/Functional testing of the following 27 types of pneumatic valves of AC Brake system of AC Rake for Metro Rail. The system is consisting Brake Pipe, Auxiliary Reservoir, Brake Cylinder Reservoir and Control Reservoir. The system has Dew point sensor, Noise level transmitter. The test stand have a structure composed of Aluminum –Section with pressure gauges construction housing with digital pressure gauges at front of the stand. The right and left side and the rear side of the test stand is provided with detachable covers and doors. All the air reservoirs and pneumatic piping are accommodated inside of the test stand.
The Hone Flashar is a completely automated process stream analyser for measuring flash points.
With a low temperature catalytic detection method to increase reliability as well as exceeding the ASTM method the Flashar is the ideal solution for your Flash point needs.
Easy line EL3000 series ABB CEMS Datasheet-continuous gas analyzersENVIMART
Easy line EL3000 series ABB CEMS Datasheet-continuous gas analyzers - ABB - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The EC900 offers unsurpassed accuracy, reliability and flexibility
under the most demanding on-line operating conditions. Systech Illinois has long been recognised worldwide as a leader in oxygen analysis. Utilising a variety of specially engineered electrochemical fuel cells, the EC900 Oxygen Analysers are designed to monitor oxygen within most industrial gases and atmospheres.
GC-7800 with autosampler is a classical and high automation gas chromatograph instrument which integrates the most advanced chromatography technique and national or international standards with the most extensive applications by the experienced experts of Labthink
GC-7800 with autosampler is a classical and high automation gas chromatograph instrument which integrates the most advanced chromatography technique and national or international standards with the most extensive applications by the experienced experts of Labthink.
Toshniwal - Thermal mass flow meters and controllerSangeethaS99
THERMAL MASS FLOW METERS AND CONTROLLER
The range of Thermal Mass Flow Meters from Bronkhorst address high accuracy in low flow rate scenarios like those seen in laboratory and Pilot plant usages. With a housing designed for laboratory and clean processing conditions, the instruments are truly unique in their capability to measure and control flow ranges between 0,014…0,7 mln/min and 8…1670 ln/min with pressure rating between vacuum and 400 bar – all in one range of instruments.
FEATURES
Rangeability in digital mode up to 1:150
High accuracy (standard 0,5% Rd plus 0,1% FS)
Pressure ratings 64 / 100 bar
Highly resistant to mechanical shocks and pressure fluctuations
Large range of Input/output options to choose from
Extremely fast and dynamic response
User configurable control characteristics
Applications
Analytical/environmental equipment
Gas flow monitoring in food, chemical and petrochemical industries
Gas consumption measurement in gas distribution systems for internal accounting purposes
Detection of gas leakage through objects
Semiconductor manufacturing
Surface treatment installations
Gas Chromatography is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes.
Eta constant temperature and humidity test chamberMark Tung
ETA Constant Temperature and Humidity Test Chamber is used to test the performance of materials in various environments. It provides a
simulated environment for testing the heat resistance, cold resistance, dry resistance and humidity resistance of materials. Suitable for
electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metals, food, chemistry, building materials,
medical, aerospace products, scientific research and other industries
opus automazione S.p.A manufactures standard and customized test benches, which satisfy the test specifications requirements of the most important carmakers.
opus has been producing for twenty years test benches for a wide range of products and other kind of test benches for example exhaust gases analysis both diesel and petrol engines.
A standard test benches overview is shown in this catalogue.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Le nuove frontiere dell'AI nell'RPA con UiPath Autopilot™UiPathCommunity
In questo evento online gratuito, organizzato dalla Community Italiana di UiPath, potrai esplorare le nuove funzionalità di Autopilot, il tool che integra l'Intelligenza Artificiale nei processi di sviluppo e utilizzo delle Automazioni.
📕 Vedremo insieme alcuni esempi dell'utilizzo di Autopilot in diversi tool della Suite UiPath:
Autopilot per Studio Web
Autopilot per Studio
Autopilot per Apps
Clipboard AI
GenAI applicata alla Document Understanding
👨🏫👨💻 Speakers:
Stefano Negro, UiPath MVPx3, RPA Tech Lead @ BSP Consultant
Flavio Martinelli, UiPath MVP 2023, Technical Account Manager @UiPath
Andrei Tasca, RPA Solutions Team Lead @NTT Data
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
31. Quick-Change Trap Holders
Traps exchanged in seconds
without need for tools
Trap Head
accepts a
variety of trap
sizes and
includes our
patented
quick-change
system
32. EPA 30B Sampling Probes
Separate
heated trap
head
Custom-length
sheath
33. EPA 30B Sampling Probes
Sample Line
(Umbilical)
(Heated and unheated
options available)
Custom-length
sheath
Separate
heated trap
head
34. Besides EthPeA p3r0oBb eS aamndp slianmgp Plirnogb es
console, a gas conditioning system
is needed to dry the gas prior to
metering.
CleanAir offers several options…
35. EPA 30B Sampling Probes
…from the simplicity of glass jar
condensers…
43. Fully
automated gas
sampler with
mass flow
controllers and
high-capacity
diaphragm
pumps
FRONT
VIEW
44. Fully
automated gas
sampler with
mass flow
controllers and
high-capacity
diaphragm
pumps
FRONT
VIEW
Gas sampler can be used as a
stand-alone unit using just about
any gas conditioning system…or
45. Combine with
our OPTIONAL
MET-80P gas
conditioning
system with
refrigerated
moisture
condenser
FRONT
VIEW
46. SIDE
VIEW
NEMA 4 containers allow
hardware to be placed in
all types of weather
conditions
47. SIDE
VIEW
All interconnects accessed
from outside using
weather-proof fittings and
plugs
48. SIDE
VIEW
Optional AC keeps
electronics safe regardless
of ambient temperatures
50. REAR
VIEW
Acid gas
scrubbers to
protect
autosampler
and ensure dry
gas sample
51. MET-80P Portable
Sorbent Trap Sampler
SPECIFICATIONS
Sample Pumps: KNF Diaphragm, 24 VDC, 12
lpm
Dual mass flow meters, 0-2 l/min
NI CompactRIO Programmable Automation
Controller
CleanAir METRICTM software
Heated Sample Line Power Output
Connection: 3 pin 120V Receptacle
Sample Probe Power Output Connection: 3
pin 120 V Receptacle
Sample Inlet Connections: 1/4" Stainless
Steel Push-on
Temperature Controllers: Solid State relays
for probe and heated sample line
Thermocouple Connections: K-Type
weather-tight
Cabinets: Water/air-tight, high-impact
copolymer resin
AC (A): 460 Btu/hr, 14 lb
AC (B): 1,300 Btu/hr 21 lb
External Dimensions (h x w x d):
(A) 14.5" x 24" x 36 “ (B) 22” x 24” x 36”
Weight: 2 x 100 lb (2 x 45 kg) w/o AC units
52. For more information on CleanAir’s sorbent trap testing
and monitoring products, contact CleanAir today.
800-991-3300
contact@cleanair.com
Thanks!
Editor's Notes
The quick-change trap holders allow the traps to be inserted into the probe by just pushing them into the ends. There are no ferrules or nuts to worry about to engage the trap and make a leak-free connection. Consequently, the traps are installed literally in a matter of seconds and without the need for tools. This becomes an important factor particularly when the sample ports are located outside or in cold (or hot) stack annuluses.