1. Chemistry is divided into several branches that study different aspects of matter. These include physical chemistry, organic chemistry, inorganic chemistry, biochemistry, industrial chemistry, nuclear chemistry, environmental chemistry, and analytical chemistry.
2. Matter is anything that has mass and occupies space. It can exist as elements, compounds, or mixtures. Elements are pure substances made of only one type of atom. Compounds are formed by chemical combination of two or more elements in a fixed ratio. Mixtures are physical combinations of elements or compounds without a fixed ratio.
3. Key terms in chemistry include the atomic number, which is the number of protons in an atom, and the atomic mass, which is the average mass of atoms of
Chemistry is the study of matter, its composition, structure, properties, transformations, and the energy involved in transformations. It has many branches including organic, inorganic, physical, analytical, and biochemistry. Chemistry plays a central role in industry, society, and everyday life through applications like materials, foods, fuels, medicines and more. There are also many career opportunities for chemists in fields like industry, teaching, health professions, entrepreneurship, forensics, commerce, and journalism.
Chemistry in our daily life and its importanceAMIR HASSAN
Chemistry in our daily life and its importance
A Short Introduction to Chemistry and its branches.
There are five main branches of Chemistry:
1)Organic Chemistry
2)Inorganic Chemistry
3)Analytical Chemistry
4)Physical Chemistry
5)Biochemistry
Presented By: Amir Hassan Chemistry Department, Government Post Graduate College Mardan KP Pakistan.
This document provides an introduction to basic chemistry concepts. It discusses that chemistry is the study of structure and properties of matter. The document then covers several key chemistry topics including the three states of matter, separating mixtures, metals and non-metals, conductors and insulators, and drugs. It also discusses the roles of chemistry in society and common careers in chemistry. Finally, it outlines important safety rules for the chemistry laboratory and describes common laboratory apparatus.
Physical chemistry is the branch that deals with the relationship between composition, physical properties, and changes in matter. It studies properties like atomic/molecular structure, behavior of gases/liquids/solids, and the effect of temperature/radiation on matter. Organic chemistry studies carbon-containing compounds like hydrocarbons and their derivatives that occur naturally or are synthesized. Inorganic chemistry deals with all elements and their compounds except hydrocarbons and their derivatives. Biochemistry studies the structure, composition, and chemical reactions of substances in living organisms.
Foundation and fundamentals of chemistry pptTejNarayan15
This document provides an introduction to a unit on general and physical chemistry presented by Tej Narayan Chapagain. It discusses several key topics:
- Chemistry is the study of the composition, structure, properties and transformations of matter. Chemists discover and apply principles of chemistry to invent technologies and products.
- Chemistry contributes to understanding natural phenomena and tracing out complex problems and solutions. It has played an important role in fields like clothing, shelter, food, polymers and more.
- Chemistry is considered a central science as it links to other disciplines like biology, physics, geology and others. Nanotechnology has emerged guided by chemical principles.
Alkanes are a family of hydrocarbons whose members contain only single carbon-hydrogen bonds. The document discusses the structure, properties, conformations, and reactions of several alkanes including methane, ethane, propane, butane, and higher alkanes. It also covers topics such as torsional strain, Grignard reagents, halogenation reactions, and IUPAC nomenclature rules for naming alkanes.
Oxidizing agents are substances that accept electrons in redox reactions, becoming reduced. They tend to have high oxidation states and strong electron affinity. Fluorine is the strongest oxidizing agent due to its high electronegativity. Common oxidizing agents include oxygen, chlorine, and ozone.
Reducing agents are substances that donate electrons in redox reactions, becoming oxidized. Metals in the alkali group are good reducing agents as they have low ionization energies and electronegativity. Lithium is the strongest reducing agent due to its small standard reduction potential. Some substances can act as both oxidizing and reducing agents depending on the reaction.
Chemistry is the study of matter, its composition, structure, properties, transformations, and the energy involved in transformations. It has many branches including organic, inorganic, physical, analytical, and biochemistry. Chemistry plays a central role in industry, society, and everyday life through applications like materials, foods, fuels, medicines and more. There are also many career opportunities for chemists in fields like industry, teaching, health professions, entrepreneurship, forensics, commerce, and journalism.
Chemistry in our daily life and its importanceAMIR HASSAN
Chemistry in our daily life and its importance
A Short Introduction to Chemistry and its branches.
There are five main branches of Chemistry:
1)Organic Chemistry
2)Inorganic Chemistry
3)Analytical Chemistry
4)Physical Chemistry
5)Biochemistry
Presented By: Amir Hassan Chemistry Department, Government Post Graduate College Mardan KP Pakistan.
This document provides an introduction to basic chemistry concepts. It discusses that chemistry is the study of structure and properties of matter. The document then covers several key chemistry topics including the three states of matter, separating mixtures, metals and non-metals, conductors and insulators, and drugs. It also discusses the roles of chemistry in society and common careers in chemistry. Finally, it outlines important safety rules for the chemistry laboratory and describes common laboratory apparatus.
Physical chemistry is the branch that deals with the relationship between composition, physical properties, and changes in matter. It studies properties like atomic/molecular structure, behavior of gases/liquids/solids, and the effect of temperature/radiation on matter. Organic chemistry studies carbon-containing compounds like hydrocarbons and their derivatives that occur naturally or are synthesized. Inorganic chemistry deals with all elements and their compounds except hydrocarbons and their derivatives. Biochemistry studies the structure, composition, and chemical reactions of substances in living organisms.
Foundation and fundamentals of chemistry pptTejNarayan15
This document provides an introduction to a unit on general and physical chemistry presented by Tej Narayan Chapagain. It discusses several key topics:
- Chemistry is the study of the composition, structure, properties and transformations of matter. Chemists discover and apply principles of chemistry to invent technologies and products.
- Chemistry contributes to understanding natural phenomena and tracing out complex problems and solutions. It has played an important role in fields like clothing, shelter, food, polymers and more.
- Chemistry is considered a central science as it links to other disciplines like biology, physics, geology and others. Nanotechnology has emerged guided by chemical principles.
Alkanes are a family of hydrocarbons whose members contain only single carbon-hydrogen bonds. The document discusses the structure, properties, conformations, and reactions of several alkanes including methane, ethane, propane, butane, and higher alkanes. It also covers topics such as torsional strain, Grignard reagents, halogenation reactions, and IUPAC nomenclature rules for naming alkanes.
Oxidizing agents are substances that accept electrons in redox reactions, becoming reduced. They tend to have high oxidation states and strong electron affinity. Fluorine is the strongest oxidizing agent due to its high electronegativity. Common oxidizing agents include oxygen, chlorine, and ozone.
Reducing agents are substances that donate electrons in redox reactions, becoming oxidized. Metals in the alkali group are good reducing agents as they have low ionization energies and electronegativity. Lithium is the strongest reducing agent due to its small standard reduction potential. Some substances can act as both oxidizing and reducing agents depending on the reaction.
9th Chemistry Notes - Test Yourself (Malik Xufyan)Malik Xufyan
This document contains practice questions and answers related to 9th grade chemistry notes. It is divided into multiple sections covering topics like branches of chemistry, physical and chemical properties of substances, atomic structure, moles and molar masses. The questions are in a MCQ format testing the understanding of fundamental concepts. For example, one question asks the student to identify the branch of chemistry that deals with atomic energy and its uses in daily life. The answer given is nuclear chemistry.
The attractive force which holds various constituents (atom, ions, etc.) together and stabilizes them by the overall loss of energy is known as chemical bonding. Therefore, it can be understood that chemical compounds are reliant on the strength of the chemical bonds between its constituents; The stronger the bonding between the constituents, the more stable the resulting compound would be.
The document provides an overview of IUPAC nomenclature rules for naming organic compounds. It explains that organic compound names have three parts: a prefix, root, and suffix. The prefix indicates functional groups, the root name comes from the number of carbon atoms in the main chain, and the suffix denotes the type of compound. It provides examples of applying the rules to name alkanes, alkenes, alcohols, carboxylic acids, and cyclic and branched compounds.
Chemistry is involved with various and diverse interactions of matter either around us or simply inside the laboratory. These are described using the language of chemistry which consists of symbols, formulas and equations.
Organic compounds can exist as isomers - compounds with the same molecular formula but different structural formulas or spatial arrangements. There are two main types of isomerism: structural isomerism and stereoisomerism. Structural isomerism includes six sub-types based on differences in carbon chain structure, functional groups, or ring formations. Stereoisomerism involves two sub-types, geometric isomers which differ in spatial arrangements around double bonds, and optical isomers which are non-superimposable mirror images called enantiomers.
Properties of periodic table by Saliha RaisSaliha Rais
The presentation "Properties of Periodic Table" is prepared for grade IX students. The slide show includes a brief description on the properties of elements in the periodic table, that shifts periodically, hence explaining the concept of periodicity. the main topics include Atomic Radii, Ionization energy, Electron affinity and Electronegativity.
I hope You all like it. I hope It is very beneficial for you all. I really thought that you all get enough knowledge from this presentation. This presentation is about materials and their classifications. After you read this presentation you knowledge is not as before.
This document discusses valency and variable valency in chemistry. It defines valency as the combining capacity of an element or radical to form molecules. Some elements like the inert gases have a valency of zero. It then lists the valencies of common elements like hydrogen, carbon, and oxygen. Variable valency is defined as elements that can exhibit more than one valency, such as iron which has valencies of 2 and 3. The document provides examples of how to denote lower and higher valencies using suffixes like -ous and -ic or roman numerals. It concludes by listing several elements that exhibit variable valency like copper, silver, and lead.
This document provides an overview of the topics covered in Chapter 1 of an introductory chemistry textbook. It introduces the five major areas of chemistry and distinguishes between pure and applied chemistry. It also describes the scientific method and emphasizes the importance of experimentation, observation, and collaboration in scientific research. Key areas of chemistry research discussed include energy, medicine, agriculture, the environment, and the study of the universe. Problem solving techniques for both numeric and conceptual chemistry problems are also outlined.
This document discusses synthetic polymers and their production. It begins by introducing addition polymerization, where monomers like ethene join together to form polymers like polyethene. Condensation polymerization is also discussed, where monomers join together while releasing a small molecule, using nylon as an example. Common synthetic polymers are then outlined, including their properties and uses. Polythene, polyvinyl chloride, polystyrene, and polypropylene are discussed. The document concludes by recapping the key topics of monomers, addition polymerization, and condensation polymerization.
This document outlines the key concepts and objectives for a unit on atoms, molecules, and ions. It will cover early atomic theories like Dalton's atomic theory, discoveries leading to the nuclear model of the atom including cathode rays and Rutherford's gold foil experiment. Students will learn about atomic structure including atomic and mass numbers. The periodic table is introduced along with chemical bonds like ionic and covalent bonds. The document also outlines naming ionic and molecular compounds as well as writing chemical formulas.
1. The document discusses the structure of molecules and the types of chemical bonds that form between atoms. It addresses ionic bonding between sodium and chlorine due to electron transfer, covalent bonding between nonmetals by electron sharing, and metallic bonding in metals due to shared free-floating electrons.
2. Several examples of different types of bonds are given, including single, double and triple covalent bonds in molecules like CH4, C2H4, N2 and O2. Dipole-dipole interactions between polar molecules like HCl are also discussed.
3. Factors that determine bond type like electronegativity differences and octet rule satisfaction are covered. The document contrasts properties of ionic
Chemistry Notes For Class 9 Chapter [Chemical Reactivity ]Usman Mustafvi
These are notes of 9th class chemistry Chapter Chemical Reactivity. These notes are very helpful for fbise and all other boards of the Punjab province. there are only short questions and MCQs in the notes.
The document discusses halogens and their medicinal uses. It covers the five halogens found in group 17 of the periodic table (fluorine, chlorine, bromine, iodine, astatine) and their physical properties like density and electronegativity decreasing from fluorine to iodine. Halogens and halogenides have medical importance, with chlorinated lime, iodine solutions, and salts like sodium chloride being used. Hypochlorites are also discussed as unstable compounds containing hypochlorite ion, used for bleaching, disinfection and water treatment when in aqueous solution.
Periodic table and periodic properties discusses the development and features of the periodic table. It describes how early scientists like Dobereiner, Newlands, and Mendeleev organized elements and recognized periodic trends before the modern periodic table. The document then outlines the structure and classifications of the modern periodic table, including periods, groups, blocks, and representative and transition metals. It also explains important periodic properties such as atomic and ionic radii, ionization energy, and effective nuclear charge and how they vary predictably across the table.
The document discusses the periodic table of elements, explaining how the elements are organized according to properties like atomic number and mass and describing important groups of elements including metals, non-metals, noble gases, and families like alkali metals and halogens. It provides details on the development of the periodic table and key aspects of classifying and understanding the elements.
Atoms are the smallest particles that make up all matter. John Dalton's atomic theory states that all matter is made of tiny indivisible particles called atoms. Atoms of different elements have different masses and chemical properties. Two or more atoms can combine to form molecules, which are the smallest units that retain the properties of a substance. Molecules are formed when atoms bond together via chemical bonds and are the smallest particles that can exist independently. Common examples of molecules include water (H2O) and oxygen (O2).
The document discusses the structure of atoms and includes questions and answers about:
- The discovery of electrons, protons, and neutrons by different scientists.
- How anode rays are formed from gas in a discharge tube.
- Evidence from Rutherford's gold foil experiment that atomic mass is concentrated at the center in a nucleus.
- How Rutherford showed atomic nuclei are positively charged using alpha particle bombardment.
- Particles that determine atomic mass.
- Differences between classical and quantum theories of radiation and angular momentum quantization.
This document discusses chemical formulas and compounds. It covers:
- The importance of chemical formulas in showing elemental composition compared to common names.
- How to write formulas for binary compounds and name them.
- Charges of transition metals and how they are represented in names using Roman numerals.
- Writing formulas for compounds containing polyatomic ions by treating them as whole units.
- Naming molecular compounds using prefixes to indicate number of atoms.
- Common acids and how to name salts containing acid anions.
- Oxidation numbers and how to determine them based on element properties and charge balance.
1. The reaction between manganese dioxide (MnO2) and hydrochloric acid (HCl) is represented by the equation: MnO2 + 4HCl → MnCl2 + 2H2O + Cl2.
2. In the reaction, hydrochloric acid (HCl) is oxidized while manganese dioxide (MnO2) is reduced.
3. Manganese dioxide (MnO2) acts as the oxidizing agent by accepting electrons, while hydrochloric acid (HCl) acts as the reducing agent by donating electrons.
This document provides an overview of the fundamentals of chemistry, including its major concepts and branches. It discusses the roles of science and chemistry in daily life, providing facilities like medicines and plastics. The major branches of chemistry covered are physical chemistry, organic chemistry, inorganic chemistry, biochemistry, industrial chemistry, nuclear chemistry, environmental chemistry, and analytical chemistry. Each branch is concisely defined in terms of its focus and applications.
global affair guide course for fresh man students to develope our knowlege ab...TediAbay
Here are some key ways chemistry plays a role in agriculture:
- Fertilizers - As mentioned, chemical fertilizers provide essential nutrients like nitrogen, phosphorus and potassium to help crops grow. Understanding soil chemistry helps determine what nutrients are needed.
- Pesticides - Chemical pesticides are used to kill insects, fungi and other pests that damage crops. Organic and inorganic compounds are developed for this purpose.
- Herbicides - Chemical herbicides selectively kill weeds without harming crops. This allows for more productive farming. The chemistry of herbicide action is studied.
- Plant breeding - Understanding plant biochemistry helps breed new varieties of crops with higher yields, resistance to diseases, and other desirable
9th Chemistry Notes - Test Yourself (Malik Xufyan)Malik Xufyan
This document contains practice questions and answers related to 9th grade chemistry notes. It is divided into multiple sections covering topics like branches of chemistry, physical and chemical properties of substances, atomic structure, moles and molar masses. The questions are in a MCQ format testing the understanding of fundamental concepts. For example, one question asks the student to identify the branch of chemistry that deals with atomic energy and its uses in daily life. The answer given is nuclear chemistry.
The attractive force which holds various constituents (atom, ions, etc.) together and stabilizes them by the overall loss of energy is known as chemical bonding. Therefore, it can be understood that chemical compounds are reliant on the strength of the chemical bonds between its constituents; The stronger the bonding between the constituents, the more stable the resulting compound would be.
The document provides an overview of IUPAC nomenclature rules for naming organic compounds. It explains that organic compound names have three parts: a prefix, root, and suffix. The prefix indicates functional groups, the root name comes from the number of carbon atoms in the main chain, and the suffix denotes the type of compound. It provides examples of applying the rules to name alkanes, alkenes, alcohols, carboxylic acids, and cyclic and branched compounds.
Chemistry is involved with various and diverse interactions of matter either around us or simply inside the laboratory. These are described using the language of chemistry which consists of symbols, formulas and equations.
Organic compounds can exist as isomers - compounds with the same molecular formula but different structural formulas or spatial arrangements. There are two main types of isomerism: structural isomerism and stereoisomerism. Structural isomerism includes six sub-types based on differences in carbon chain structure, functional groups, or ring formations. Stereoisomerism involves two sub-types, geometric isomers which differ in spatial arrangements around double bonds, and optical isomers which are non-superimposable mirror images called enantiomers.
Properties of periodic table by Saliha RaisSaliha Rais
The presentation "Properties of Periodic Table" is prepared for grade IX students. The slide show includes a brief description on the properties of elements in the periodic table, that shifts periodically, hence explaining the concept of periodicity. the main topics include Atomic Radii, Ionization energy, Electron affinity and Electronegativity.
I hope You all like it. I hope It is very beneficial for you all. I really thought that you all get enough knowledge from this presentation. This presentation is about materials and their classifications. After you read this presentation you knowledge is not as before.
This document discusses valency and variable valency in chemistry. It defines valency as the combining capacity of an element or radical to form molecules. Some elements like the inert gases have a valency of zero. It then lists the valencies of common elements like hydrogen, carbon, and oxygen. Variable valency is defined as elements that can exhibit more than one valency, such as iron which has valencies of 2 and 3. The document provides examples of how to denote lower and higher valencies using suffixes like -ous and -ic or roman numerals. It concludes by listing several elements that exhibit variable valency like copper, silver, and lead.
This document provides an overview of the topics covered in Chapter 1 of an introductory chemistry textbook. It introduces the five major areas of chemistry and distinguishes between pure and applied chemistry. It also describes the scientific method and emphasizes the importance of experimentation, observation, and collaboration in scientific research. Key areas of chemistry research discussed include energy, medicine, agriculture, the environment, and the study of the universe. Problem solving techniques for both numeric and conceptual chemistry problems are also outlined.
This document discusses synthetic polymers and their production. It begins by introducing addition polymerization, where monomers like ethene join together to form polymers like polyethene. Condensation polymerization is also discussed, where monomers join together while releasing a small molecule, using nylon as an example. Common synthetic polymers are then outlined, including their properties and uses. Polythene, polyvinyl chloride, polystyrene, and polypropylene are discussed. The document concludes by recapping the key topics of monomers, addition polymerization, and condensation polymerization.
This document outlines the key concepts and objectives for a unit on atoms, molecules, and ions. It will cover early atomic theories like Dalton's atomic theory, discoveries leading to the nuclear model of the atom including cathode rays and Rutherford's gold foil experiment. Students will learn about atomic structure including atomic and mass numbers. The periodic table is introduced along with chemical bonds like ionic and covalent bonds. The document also outlines naming ionic and molecular compounds as well as writing chemical formulas.
1. The document discusses the structure of molecules and the types of chemical bonds that form between atoms. It addresses ionic bonding between sodium and chlorine due to electron transfer, covalent bonding between nonmetals by electron sharing, and metallic bonding in metals due to shared free-floating electrons.
2. Several examples of different types of bonds are given, including single, double and triple covalent bonds in molecules like CH4, C2H4, N2 and O2. Dipole-dipole interactions between polar molecules like HCl are also discussed.
3. Factors that determine bond type like electronegativity differences and octet rule satisfaction are covered. The document contrasts properties of ionic
Chemistry Notes For Class 9 Chapter [Chemical Reactivity ]Usman Mustafvi
These are notes of 9th class chemistry Chapter Chemical Reactivity. These notes are very helpful for fbise and all other boards of the Punjab province. there are only short questions and MCQs in the notes.
The document discusses halogens and their medicinal uses. It covers the five halogens found in group 17 of the periodic table (fluorine, chlorine, bromine, iodine, astatine) and their physical properties like density and electronegativity decreasing from fluorine to iodine. Halogens and halogenides have medical importance, with chlorinated lime, iodine solutions, and salts like sodium chloride being used. Hypochlorites are also discussed as unstable compounds containing hypochlorite ion, used for bleaching, disinfection and water treatment when in aqueous solution.
Periodic table and periodic properties discusses the development and features of the periodic table. It describes how early scientists like Dobereiner, Newlands, and Mendeleev organized elements and recognized periodic trends before the modern periodic table. The document then outlines the structure and classifications of the modern periodic table, including periods, groups, blocks, and representative and transition metals. It also explains important periodic properties such as atomic and ionic radii, ionization energy, and effective nuclear charge and how they vary predictably across the table.
The document discusses the periodic table of elements, explaining how the elements are organized according to properties like atomic number and mass and describing important groups of elements including metals, non-metals, noble gases, and families like alkali metals and halogens. It provides details on the development of the periodic table and key aspects of classifying and understanding the elements.
Atoms are the smallest particles that make up all matter. John Dalton's atomic theory states that all matter is made of tiny indivisible particles called atoms. Atoms of different elements have different masses and chemical properties. Two or more atoms can combine to form molecules, which are the smallest units that retain the properties of a substance. Molecules are formed when atoms bond together via chemical bonds and are the smallest particles that can exist independently. Common examples of molecules include water (H2O) and oxygen (O2).
The document discusses the structure of atoms and includes questions and answers about:
- The discovery of electrons, protons, and neutrons by different scientists.
- How anode rays are formed from gas in a discharge tube.
- Evidence from Rutherford's gold foil experiment that atomic mass is concentrated at the center in a nucleus.
- How Rutherford showed atomic nuclei are positively charged using alpha particle bombardment.
- Particles that determine atomic mass.
- Differences between classical and quantum theories of radiation and angular momentum quantization.
This document discusses chemical formulas and compounds. It covers:
- The importance of chemical formulas in showing elemental composition compared to common names.
- How to write formulas for binary compounds and name them.
- Charges of transition metals and how they are represented in names using Roman numerals.
- Writing formulas for compounds containing polyatomic ions by treating them as whole units.
- Naming molecular compounds using prefixes to indicate number of atoms.
- Common acids and how to name salts containing acid anions.
- Oxidation numbers and how to determine them based on element properties and charge balance.
1. The reaction between manganese dioxide (MnO2) and hydrochloric acid (HCl) is represented by the equation: MnO2 + 4HCl → MnCl2 + 2H2O + Cl2.
2. In the reaction, hydrochloric acid (HCl) is oxidized while manganese dioxide (MnO2) is reduced.
3. Manganese dioxide (MnO2) acts as the oxidizing agent by accepting electrons, while hydrochloric acid (HCl) acts as the reducing agent by donating electrons.
This document provides an overview of the fundamentals of chemistry, including its major concepts and branches. It discusses the roles of science and chemistry in daily life, providing facilities like medicines and plastics. The major branches of chemistry covered are physical chemistry, organic chemistry, inorganic chemistry, biochemistry, industrial chemistry, nuclear chemistry, environmental chemistry, and analytical chemistry. Each branch is concisely defined in terms of its focus and applications.
global affair guide course for fresh man students to develope our knowlege ab...TediAbay
Here are some key ways chemistry plays a role in agriculture:
- Fertilizers - As mentioned, chemical fertilizers provide essential nutrients like nitrogen, phosphorus and potassium to help crops grow. Understanding soil chemistry helps determine what nutrients are needed.
- Pesticides - Chemical pesticides are used to kill insects, fungi and other pests that damage crops. Organic and inorganic compounds are developed for this purpose.
- Herbicides - Chemical herbicides selectively kill weeds without harming crops. This allows for more productive farming. The chemistry of herbicide action is studied.
- Plant breeding - Understanding plant biochemistry helps breed new varieties of crops with higher yields, resistance to diseases, and other desirable
This document provides an overview of basic chemistry concepts. It begins by classifying matter as either mixtures or pure substances, with pure substances further divided into elements and compounds. Elements contain only one type of atom, while compounds contain two or more different types of atoms combined in fixed ratios. The three common states of matter - solids, liquids, and gases - are described based on how tightly or loosely the particles are packed. Key concepts like the mole, molar mass, empirical and molecular formulas are also introduced. Measurement units commonly used in chemistry like grams, meters, and moles are defined according to the International System of Units.
This document provides an overview of basic chemistry concepts. It begins by classifying matter as either mixtures or pure substances, with pure substances further divided into elements and compounds. Elements contain only one type of atom, while compounds contain two or more different types of atoms combined in fixed ratios. The three common states of matter - solids, liquids, and gases - are described based on how tightly or loosely the particles are packed. Key concepts like the mole, molar mass, empirical and molecular formulas are also introduced. Measurement units commonly used in chemistry like grams, meters, and moles are defined according to the International System of Units.
This document provides an introduction to the fundamentals of chemistry. It defines chemistry as the branch of science studying matter, its composition, properties, and changes. It then discusses the key branches of chemistry and provides an overview of some basic chemical concepts including atoms, elements, molecules, and ions. Atoms are the smallest particle of an element that retains the properties of that element. Elements are substances that cannot be broken down further by chemical means and are composed of only one type of atom. The document lays the groundwork for understanding more advanced chemical topics.
Chemistry has been divided into several branches to facilitate study. These include physical chemistry, which deals with physical properties of matter; organic chemistry, which studies hydrocarbons and their derivatives; and inorganic chemistry, which examines substances not considered organic. Other branches mentioned are biochemistry, studying compounds like carbohydrates and proteins; industrial chemistry, concerning industrial production; nuclear chemistry, regarding atomic structure; environmental chemistry, building sustainable environments; and analytical chemistry, determining molecular formulas.
Chemistry is the study of the composition, properties, and behavior of matter. It is concerned with atoms and their interactions, including chemical bonds and interactions between atoms or groups of atoms with various forms of energy. Chemistry is part of everyday life and can be seen in foods, air, household products, emotions, and all objects. It is used to determine the makeup of molecular structures and is key to many everyday products from batteries to food flavors.
Chemistry is the study of matter and its interactions. It plays a vital role in daily life through uses in healthcare, industry, and technology. Key discoveries include Lavoisier establishing modern chemistry and Kekulé proposing carbon's ability to form four bonds, allowing for complex molecule structures. Career options include analytical chemist, chemical engineer, and research scientist.
This document discusses the main branches of chemistry. It defines chemistry as the study of substances and their structures, properties, transformations and energy changes during transformations. The five main branches are organic chemistry, inorganic chemistry, analytical chemistry, physical chemistry, and biochemistry. Each branch is defined and examples of their sub-branches and applications are provided.
Chemistry is defined as the study of matter and the changes it undergoes. It involves understanding elements and compounds, which are the basic units of matter. Stoichiometry, the calculation of quantities in chemical reactions, allows us to understand what happens in equations. The main branches of chemistry covered are thermochemistry, organic chemistry, and nuclear chemistry. Thermochemistry studies energy changes in reactions and phase changes. Organic chemistry examines carbon-based compounds important for living things. Nuclear chemistry focuses on radioactive elements and processes like fission and fusion.
Chemistry plays a central role in science and daily life. It deals with the composition, structure, and properties of matter. Chemical principles are important in diverse areas like weather patterns, functioning of the brain, and computer operation. Chemical industries contribute significantly to the national economy by manufacturing fertilizers, drugs, polymers, and other products that improve quality of life. With a better understanding of chemical principles, new materials with specific properties can be designed and synthesized. Chemistry also helps tackle environmental issues like ozone depletion and pollution. Understanding biochemical processes and synthesizing new materials present intellectual challenges for future chemists.
This document provides an overview of Module One of a chemistry course which covers the composition, structure, and behavior of matter. It defines key concepts such as matter, mass, the microscopic and submicroscopic levels of matter, and differences in the arrangement of atoms that lead to differences in properties and behaviors of substances. It also discusses using models to understand matter at the molecular level and distinguishes between pure substances and mixtures.
This document provides an overview of chemistry for 9th class students. It discusses the fundamentals of chemistry, including the definition of chemistry as the study of matter and energy. It then outlines the main branches of chemistry: physical chemistry deals with physical properties and changes; organic chemistry focuses on carbon compounds; inorganic chemistry covers non-carbon compounds; and nuclear chemistry involves radioactivity and nuclear processes. The document also defines key chemistry concepts like matter, substances, mixtures, elements, compounds, and provides examples to illustrate these terms.
There are several main branches of chemistry including analytical chemistry, organic chemistry, inorganic chemistry, physical chemistry, biochemistry, nuclear chemistry, and materials chemistry. Analytical chemistry involves the separation, identification, and quantification of chemical components. Organic chemistry is the study of carbon-containing compounds. Inorganic chemistry covers non-organic compounds including minerals, salts, and water. Physical chemistry examines the physical and theoretical properties of chemical systems. Biochemistry studies chemistry in living organisms. Nuclear chemistry deals with radioactive elements and processes. Materials chemistry prepares and analyzes functional substances.
The document discusses different branches of chemistry. It defines organic chemistry as dealing with carbon-based compounds, inorganic chemistry as studying elements and compounds not containing carbon, physical chemistry as examining the theoretical basis of chemical behavior, biochemistry as concerning the composition and changes in living organisms, and analytical chemistry as focusing on the composition of substances. The branches are interrelated and work together to advance scientific understanding.
How can I get started with learning basic chemistry?
Start by exploring the structure of atoms, understanding chemical bonds, and familiarizing yourself with the Periodic Table.
Chemistry is often referred to as the central science, and for a good reason. It serves as the foundation for understanding the world around us. Whether you are a student, a scientist, or simply a curious individual, grasping the basics of chemistry is essential.
9th Chemistry Ch 1 Federal board, 03-6-2020.pptsaqibnaveed9
This document provides an overview of fundamentals of chemistry including definitions of key terms. It discusses what chemistry is, the major branches of chemistry, and defines concepts like elements, compounds, mixtures, atomic number, mass number, empirical formula, molecular formula, molecular mass, and formula mass. Examples are provided to explain how to calculate protons, neutrons, relative atomic mass, and masses of different compounds. The document is intended as a lecture on basic chemistry concepts for a 9th grade class.
Explore chemistry's diverse facets! From Organic to Physical Chemistry, each branch unlocks unique insights. Need support? Opt for Chemistry Assignment Help, ensuring success in your academic journey. Dive into the world of elements with confidence!
Similar to Chemistry 9Th Book, PUNJAB TEXT BOOK (20)
Chemistry Short Question Notes 9th Exercise full BookSumama Shakir
This document contains questions and answers related to chemical equilibrium. It begins with multiple choice questions and their answers. It then provides short answer questions on topics like the definition of reactants and products, examples of reactants and products in a chemical reaction, characteristics of reversible and irreversible reactions, and the definition of chemical equilibrium. Longer questions cover additional topics such as how dynamic equilibrium is established, what determines the direction of a reaction, and characteristics of reactions that reach equilibrium.
Chemistry Short Question Notes 9th Exercise full BookSumama Shakir
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like depression and anxiety.
Chemistry 10th in English medium,This book is by Punjab Curriculum and Textbo...Sumama Shakir
Chemistry 10th in English medium
Chemistry 10th Class Book (English Medium) Free Download the book Chemistry Class 10 english medium students. This book is by Punjab Curriculum
The document discusses the production and properties of nitric acid and hydrochloric acid. It describes the main industrial processes for manufacturing each acid, including the Ostwald process for nitric acid production and electrolysis of sodium chloride to produce chlorine for hydrochloric acid synthesis. Key safety considerations for acid storage are outlined, emphasizing the need for corrosion-resistant materials and segregation of different acid types.
Nitric acid is a strong oxidizing agent that is colorless and highly corrosive. It is produced industrially via the Ostwald process, which involves the oxidation of ammonia to nitric oxide using a platinum catalyst and air, followed by the oxidation of nitric oxide to nitrogen dioxide and its absorption in water to form nitric acid. Nitric acid has a variety of uses including as a fertilizer component and nitrating agent for explosives. Hydrochloric acid is also a strong corrosive acid that is produced from chlorination byproducts or by reacting metallic chlorides with sulfuric acid. It is used in a variety of industrial processes.
This document discusses nitric acid and hydrochloric acid (HCl). It describes the preparation and uses of nitric acid, including in fertilizers, plastics, dyes, and explosives. The disadvantages of nitric acid are that it is highly corrosive and can damage lungs if inhaled or the throat and stomach if swallowed. The document then introduces HCl as a clear, colorless, and corrosive acid found in gastric acid. Methods of producing HCl include burning elements, reactions of organic byproducts and metallic chlorides with sulfuric acid, waste incineration, and decomposition of hydrated heavy metals.
Nitric acid and hydrochloric acid are strong acids that are highly soluble in water. Nitric acid is produced commercially via the Ostwald process, which involves catalytic oxidation of ammonia to produce nitric oxide, which is then oxidized to nitrogen dioxide and absorbed in water to form nitric acid. Hydrochloric acid is produced via electrolysis of sodium chloride to produce chlorine, which is then combined with hydrogen to form hydrochloric acid. Both acids are colorless liquids with pungent odors that are widely used in industry, such as in fertilizer production and cleaning applications. Proper storage of the acids requires acid resistant containers and secondary containment to mitigate hazards.
Nitric acid Preparation & Uses Raw materials, Flow sheet diagram unit operat...Sumama Shakir
Nitric acid and hydrochloric acid are strong acids with various industrial uses. Nitric acid is produced through the Ostwald process involving ammonia oxidation over a platinum catalyst. It is used to make explosives, fertilizers, and other chemicals. Proper storage of nitric and hydrochloric acids is important due to their corrosive nature and potential for dangerous reactions. They should be kept in acid-resistant containers in a well-ventilated chemical storage area.
Nitric acid is a colorless liquid that is strongly acidic and corrosive. It is produced industrially through the Ostwald process, which involves a three-step oxidation of ammonia using air over a platinum catalyst. Nitric acid is used to produce fertilizers, explosives like TNT, and other chemicals. It is also used in metal purification and to make aqua regia for dissolving noble metals. Proper precautions must be taken when handling nitric acid due to its corrosive nature and potential to cause burns or lung damage.
This document provides an overview of databases and database management systems (DBMS). It defines what a database is (a systematic collection of data) and some common database applications like banking, universities, online shopping, and more. It describes what a DBMS is and its purpose of interacting with users and the database for storage, analysis, and access control. The document outlines database languages like SQL and database structure involving tables, rows, and columns. It discusses database components like schemas, tables, columns and rows. Finally, it compares key differences between DBMS and file systems, noting that DBMS allows flexible querying across related data tables while preventing redundancy and restricting unauthorized access.
This document discusses computer security, privacy, and ecommerce. It defines computer security as protecting systems from damage or unauthorized access. Common cyber attacks like malware, phishing, and denial-of-service attacks are described along with methods to prevent them like anti-malware software and extra bandwidth. The document also defines computer privacy as an individual's right to choose what information is shared, and discusses maintaining privacy through separate user accounts and encrypted files. Ecommerce is defined as the buying and selling of goods online, and the main types including business-to-business, business-to-consumer, and consumer-to-consumer are outlined. The advantages and disadvantages of ecommerce are briefly discussed.
computer and society impact of Computer in society Sumama Shakir
This document discusses computer and society, the impact of computers, and computer ethics. It begins by noting how computers are now ubiquitous and impact daily life and communication. It then outlines several major applications of computers in fields like management, banking, industry, engineering, medicine, and transportation. Both positive impacts like efficiency and data storage, and negative impacts like costs and data loss are discussed. The document also covers computer ethics, including issues around intellectual property, privacy, and how technology shapes society. Specific ethical concerns are outlined, like plagiarism, hacking, and phishing scams. Finally, the document provides tips to avoid phishing scams and promote responsible computer use.
Computer and their Uses types of computer Sumama Shakir
The document discusses different types of computers and their uses. It describes how computers are now ubiquitous in many devices like cars, home appliances and workplaces. It then defines computers and their basic components like hardware, software, data and users. The document categorizes computers based on their use, power, price and type. It explains different types of computers like desktops, laptops, tablets, smartphones used by individuals. It also discusses computers used in organizations like servers, mainframes and supercomputers. Finally, it describes the essential computer hardware components like processors, memory, input/output devices and storage devices.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UPRAHUL
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
2. All rights (Copy right etc.) are reserved with the publisher.
Approved by the Federal Ministry of Education (Curriculum Wing), Islamabad, according to the
National Curriculum 2006 under the National Textbook and Learning Materials Policy 2007.
N.O.C. F.2-2/2010-Chem. Dated 2-12-2010. This book has also been published by Punjab
Textbook Board under a print licence arrangement for free distribution in all Government
School in Punjab. No part of this book can be copied in any form especially guides, help books
etc., without the written permission of the publisher.
The Caravan Book HouseThe Caravan Book HouseThe Caravan Book House
Kachehri Road, Lahore
Prepared by:
Dr. Jaleel Tariq
Dr. Irshad Ahmad Chatha
Authors:
Unit 1 Fundamentals of Chemistry 1
Unit 2 Structure of Atoms 27
Unit 3 Periodic Table and Periodicity of Properties 44
Unit 4 Structure of Molecules 58
Unit 5 Physical States of Matter 75
Unit 6 Solutions 96
Unit 7 Electrochemistry 113
Unit 8 Chemical Reactivity 138
CONTENTS
Designed by: Sakhawat Hussain
3. Chapter1
Major Concepts
1.1 Branches of Chemistry
1.2 Basic Definitions
1.3 Chemical species
1.4 Avogadro' s Number and Mole
1.5 Chemical Calculations
Students Learning Outcomes
Students will be able to:
• Identify and provide examples of different branches of chemistry.
• Differentiate among branches of chemistry.
• Distinguish between matter and a substance.
• Define ions, molecular ions, formula units and free radicals.
• Define atomic number, atomic mass, atomic mass unit.
• Differentiate among elements, compounds and mixtures.
• Define relative atomic mass based on C-12 scale.
• Differentiate between empirical and molecular formula.
• Distinguish between atoms and ions.
• Differentiate between molecules and molecular ions.
• Distinguish between ion and free radicals.
• Classify the chemical species from given examples.
• Identify the representative particles of elements and compounds.
• Relate gram atomic mass, gram molecular mass and gram formula mass to
mole.
• Describe how Avogadro's number is related to a mole of any substance.
• Distinguish among the terms gram atomic mass, gram molecular mass and
gram formula mass.
• Change atomic mass, molecular mass and formula mass into gram atomic
mass, gram molecular mass and gram formula mass.
Fundamentals of Chemistry
Time allocation
Teaching periods 12
Assessment periods 03
Weightage 10%
4. Unit 1: Fundamentals of ChemistryChemistry - IX
Introduction
The knowledge that provides understanding of this world and how it works, is
science. The branch of science which deals with the composition, structure, properties
and reactionsofmatteriscalledchemistry.Itdealswitheveryaspectof our life.
The development of science and technology has provided us a lot of facilities in
daily life. Imagine the role and importance of petrochemical products, medicines and
drugs, soap, detergents, paper, plastics, paints and pigments, insecticides, pesticides
which all are fruit of the efforts of chemists. The development of chemical industry has
also generated toxic wastes, contaminated water and polluted air around us. On the other
hand, chemistry also provides knowledge and techniques to improve our health and
environmentandtoexploreandtoconservethenaturalresources.
In this chapter, we will study about different branches of chemistry, basic
definitionsandconceptsof chemistry.
1.1 BRANCHES OF CHEMISTRY
It is a fact that we live in the world of chemicals. We all depend upon different
living organisms which require water, oxygen or carbon dioxide for their survival.
Today chemistry has a wide scope in all aspects of life and is serving the humanity
day and night. Chemistry is divided into following main branches: physical
chemistry, organic chemistry, inorganic chemistry, biochemistry, industrial chemistry,
nuclear chemistry, environmental chemistry and analytical chemistry.
1.1.1 Physical Chemistry
Physical Chemistry is defined as the branch of chemistry that deals with the
relationship between the composition and physical properties of matter along with the
changes in them. The properties such as structure of atoms or formation of molecules
behavior of gases, liquids and solids and the study of the effect of temperature or
radiationon matterarestudiedunderthisbranch.
1.1.2 Organic Chemistry
Organic Chemistry is the study of covalent compounds of carbon and hydrogen
(hydrocarbons) and their derivatives. Organic compounds occur naturally and are also
synthesized in the laboratories. Organic chemists determine the structure and properties
of these naturally occurring as well as synthesized compounds. Scope of this branch
coverspetroleum,petrochemicalsandpharmaceuticalindustries.
1.1.3 Inorganic Chemistry
Inorganic chemistry deals with the study of all elements and their compounds
except those of compounds of carbon and hydrogen (hydrocarbons) and their
derivatives. It has applications in every aspect of the chemical industry such as glass,
cement,ceramicsandmetallurgy (extractionofmetalsfromores).
2
5. 1.1.4 Biochemistry
It is the branch of chemistry in which we study the structure, composition, and
chemical reactions of substances found in living organisms. It covers all chemical
processes taking place in living organisms, such as synthesis and metabolism of
biomolecules like carbohydrates, proteins and fats. Biochemistry emerged as a separate
discipline when scientists began to study how living things obtain energy from food or
how the fundamental biological changes occur during a disease. Examples of
applications of biochemistry are in the fields of medicine, food science and agriculture,
etc.
1.1.5 Industrial Chemistry
The branch of chemistry that deals with the manufacturing of chemical
compounds on commercial scale, is called industrial chemistry. It deals with the
manufacturing of basic chemicals such as oxygen, chlorine, ammonia, caustic soda,
nitric acid and sulphuric acid. These chemicals provide the raw materials for many other
industriessuchasfertilizers,soap, textiles,agriculturalproducts,paintsandpaper,etc.
1.1.6 Nuclear Chemistry
Nuclear Chemistry is the branch of chemistry that deals with the radioactivity,
nuclear processes and properties. The main concern of this branch is with the atomic
energy and its uses in daily life. It also includes the study of the chemical effects resulting
from the absorption of radiation within animals, plants and other materials. It has vast
applications in medical treatment (radiotherapy), preservation of food and generation of
electricalpowerthroughnuclearreactors,etc.
1.1.7 EnvironmentalChemistry
It is the branch of chemistry in which we study about components of the
environment and the effects of human activities on the environment. Environmental
chemistry is related to other branches like biology, geology, ecology, soil and water. The
knowledge of chemical processes taking place in environment is necessary for its
improvementandprotectionagainstpollution.
1.1.8 AnalyticalChemistry
Analytical chemistry is the branch of chemistry that deals with separation and
analysis of a sample to identify its components. The separation is carried out prior to
qualitative and quantitative analysis. Qualitative analysis provides the identity of a
substance (composition of chemical species). On the other hand, quantitative analysis
determines the amount of each component present in the sample. Hence, in this branch
different techniques and instruments used for analysis are studied. The scope of this
branchcoversfood, water,environmentalandclinicalanalysis.
3 Unit 1: Fundamentals of ChemistryChemistry - IX
6. Test yourself
1.1
1.2 BASIC DEFINITIONS
Matter is simply defined as anything that has mass and occupies space. Our
bodies as well as all the things around us are examples of matter. In chemistry, we study
alltypesof mattersthatcanexistinanyofthreephysicalstates:solid,liquidor gas.
A piece of matter in pure form is termed as a substance. Every substance has a
fixed composition and specific properties or characteristics. Whereas, impure matter is
calledamixture;whichcanbehomogeneousor heterogeneousinitscomposition.
We know that every substance has physical as well as chemical properties. The
properties those are associated with the physical state of the substance are called
physical properties like colour, smell, taste, hardness, shape of crystal, solubility,
melting or boiling points, etc. For example, when ice is heated, it melts to form water.
When water is further heated, it boils to give steam. In this entire process only the
physicalstatesof waterchangewhereasitschemicalcompositionremainsthesame.
The chemical properties depend upon the composition of the substance. When a
substance undergoes a chemical change, its composition changes and a new substances
are formed. For example, decomposition of water is a chemical change as it produces
hydrogen and oxygen gases.All materials are either a substance or a mixture. Figure 1.1
shows simpleclassificationof thematterintodifferentforms.
4 Unit 1: Fundamentals of ChemistryChemistry - IX
i . In which branch of chemistry behaviour of gases and liquids is
studied?
ii. Define biochemistry?
iii. Which branch of chemistry deals with preparation of paints and
paper?
iv. In which branch of chemistry the metabolic processes of
carbohydrates and proteins are studied?
v. Which branch of chemistry deals with atomic energy and its uses
in daily life?
vi. Which branch of chemistry deals with the structure and
properties of naturally occurring molecules?
Mixture Substance
MATTER
Mixture Substance
MATTER
Homogeneous
mixture
Hetrogeneous
mixture
Homogeneous
mixture
Heterogeneous
mixture
CompoundsElements CompoundsElements
Fig. 1.1. Classification of matter
7. ‘s crust
5 Unit 1: Fundamentals of ChemistryChemistry - IX
1.2.1 Elements,Compounds and Mixtures
1.2.1.1 Elements
In the early ages, only nine elements (carbon, gold, silver, tin, mercury, lead,
copper, iron and sulphur) were known.At that time, it was considered that elements were
the substances that could not be broken down into simpler units by ordinary chemical
processes. Until the end of nineteenth century, sixty-three elements had been discovered.
Now 118 elements have been discovered, out of which 92 are naturally occurring
elements. Modern definition of element is that it is a substance made up of same type of
atoms, having same atomic number and cannot be decomposed into simple substances
by ordinary chemical means. It means that each element is made up of unique type of
atomsthathaveveryspecificproperties.
Elements occur in nature in free or combined form. All the naturally occurring
elements found in the world have different percentages in the earth's crust, oceans and
atmosphere. Table 1.1. shows natural occurrence in percentage by weight of some major
elements around us. It shows concentrations of these major elements found in the three
mainsystems of our environment.
Table 1.1 Natural Occurrences by Weight % of Some Major Elements
Elements may be solids, liquids or gases. Majority of the elements exist as solids
e.g. sodium, copper, zinc, gold, etc. There are very few elements which occur in liquid
state e.g. mercury and bromine. A few elements exist as gases e.g. nitrogen, oxygen,
chlorineandhydrogen.
On the basis of their properties, elements are divided into metals, non-metals and
metalloids.About80percentof theelementsaremetals.
8. 6 Unit 1: Fundamentals of ChemistryChemistry - IX
Elements are represented by symbols, which are abbreviations for the name of
elements. A symbol is taken from the name of that element in English, Latin, Greek or
German. If it is one letter, it will be capital as H for Hydrogen, N for Nitrogen and C for
Carbon etc. In case of two letters symbol, only first letter is capital e.g. Ca for Calcium,
Nafor SodiumandClfor Chlorine.
The unique property of an element is valency. It is combining capacity of an
element with other elements. It depends upon the number of electrons in the outermost
shell.
In simple covalent compounds, valency is the number of hydrogen atoms which
combine with one atom of that element or the number of bonds formed by one atom of
thatelemente.g.inthefollowingcompounds.
Thevalencyofchlorine,oxygen,nitrogenandcarbonis 1,2,3 and4,respectively.
In simple ionic compounds valency is the number of electrons gained or lost by
an atom of an element to complete its octet. Elements having less than four electrons in
their valence shell; prefer to lose the electrons to complete their octet. For example,
atoms of Na, Mg and Al have 1, 2 and 3 electrons in their valence shells respectively.
They lose these electrons to have valency of 1, 2 and 3, respectively. On the other hand,
elements having five or more than five electrons in their valence shells, gain electrons to
complete their octet. For example, N, O and Cl have 5, 6 and 7 electrons in their valence
shells respectively. They gain 3, 2 and 1 electrons respectively to complete their octet.
Hence, they show valency of 3, 2 and 1, respectively. A radical is a group of atoms that
have some charge. Valencies of some common elements and radicals are shown in Table
1.2.
Major part of a living body is made up of water i.e. 65% to 80% by
mass.
Six elements constitute about 99% of our body mass; namely:
Oxygen 65 %, Carbon 18%, Hydrogen 10 %, Nitrogen 3%,
Calcium1.5% and Phosphorus 1.5%.
Potassium, Sulphur, Magnesium and Sodium constitute 0.8% of
our body mass. Whereas Copper, Zinc, Fluorine, Chlorine, Iron,
Cobaltand Manganeseconstituteonly0.2% ofour bodymass.
Do you know?
9. 7 Unit 1: Fundamentals of ChemistryChemistry - IX
Table 1.2 Some Elements and Radicals with their Symbols and Common
Valencies
Some elements show more than one valency, i.e. they have variable valency. For
example, in ferrous sulphate (FeSO ) the valency of iron is 2. In ferric sulphate4
(Fe (SO ) ), the valency of iron is 3. Generally, the Latin or Greek name for the element2 4 3
(e.g., Ferrum) is modified to end in 'ous' for the lower valency (e.g. Ferrous) and to end in
'ic' forthehighervalency(e.g.Ferric).
1.2.1.2 Compound
Compound is a substance made up of two or more elements chemically combined
together in a fixed ratio by mass.As a result of this combination, elements lose their own
properties and produce new substances (compounds) that have entirely different
properties. Compounds can't be broken down into its constituent elements by simple
physical methods. For example, carbon dioxide is formed when elements of carbon and
oxygen combine chemically in a fixed ratio of 12:32 or 3:8 by mass. Similarly, water is a
compound formed by a chemical combination between hydrogen and oxygen in a fixed
ratioof 1:8by mass.
10. 8 Unit 1: Fundamentals of ChemistryChemistry - IX
Compounds can be classified as ionic or covalent. Ionic compounds do not exist
in independent molecular form. They form a three dimensional crystal lattice, in which
each ion is surrounded by oppositely charged ions. These oppositely charged ions attract
each other very strongly, as a result ionic compounds have high melting and boiling
points.Thesecompoundsarerepresentedbyformulaunitse.g.NaCl,KBr,CuSO .4
The covalent compounds mostly exist in molecular form. A molecule is a true
representative of the covalent compound and its formula is called molecular formula
e.g.H O, HC1, H SO ,Ch .2 2 4 4
Table 1.3 Some Common Compounds with their Formulae
1.2.1.3 Mixture
When two or more elements or compounds mix up physically without any fixed
ratio, they form a mixture. On mixing up, the component substances retain their own
chemical identities and properties. The mixture can be separated into parent components
by physical methods such as distillation, filtration, evaporation, crystallisation or
magnetization. Mixtures that have uniform composition throughout are called
homogeneous mixtures e.g. air, gasoline, ice cream. Whereas, heterogeneous mixtures
arethoseinwhichcompositionis notuniform throughoute.g.soil,rockandwood.
Always use:
Standard symbols of elements
Chemical formulae of compounds
Proper abbreviations of scientific terms
Standard values and SI units for constants
Remember
11. Do you know?
9 Unit 1: Fundamentals of ChemistryChemistry - IX
Table 1.4 Difference between a Compound and a Mixture
1.2.1 AtomicNumberand Mass Number
The atomic number of an element is equal to the number of protons present in
the nucleus of its atoms. It is represented by symbol ‘Z’.As all atoms of an element have
thesamenumberofprotons intheirnuclei,theyhavethesameatomicnumber.
Air is a mixture of nitrogen, oxygen, carbon dioxide, noble gases and
water vapours.
Soil is a mixture of sand, clay, mineral salts, water and air.
Milk is a mixture of water, sugar, fat, proteins, mineral salts and vitamins.
Brass is a mixture of copper and zinc metals.
It is formed by a chemical combination of
atoms of the elements.
i Mixture is formed by the simple mixing
up of the substances.
The constituents lose their identity and
form a new substance having entirely
different properties from them.
ii. Mixture shows the properties of the
constituents.
Compounds always have fixed
composition by mass.
iii. Mixtures do not have fixed composition.
The components cannot be separated by
physical means.
iv. The components can be separated by
simple physical methods.
Every compound is represented by a
chemical formula.
v. It consists of two or more components
and does not have any chemical
formula.
Compounds have homogeneous
composition.
vi. They may be homogeneous or
heterogeneous in composition
Compounds have sharp and fixed melting
points
vii. Mixtures do not have sharp and fixed
melting points.
Compound Mixture
Test yourself
1.2
i. Can you identify mixture, element or compound out of the
following:
Coca cola, petroleum, sugar, table salt, blood, gun powder, urine,
aluminium, silicon, tin, lime and ice cream.
ii. How can you justify that air is a homogenous mixture. Identify
substances present in it.
iii. Name the elements represented by the following symbols:
Hg, Au, Fe, Ni, Co, W, Sn, Na, Ba, Br, Bi.
iv. Name a solid, a liquid and a gaseous element that exists at the
room temperature.
v. Which elements do the following compounds contain?
Sugar, common salt, lime water and chalk.
12. 10 Unit 1: Fundamentals of ChemistryChemistry - IX
Hence, each element has a specific atomic number termed as its identification
number. For example, all hydrogen atoms have 1 proton, their atomic number is Z=l.All
atoms in carbon have 6 protons, their atomic number is Z=6. Similarly, in oxygen all
atoms have 8 protons having atomic number Z=8 and sulphur having 16 protons shows
atomicnumberZ=16.
The mass number is the sum of number of protons and neutrons present in the
nucleusofan atom.Itis representedbysymbol 'A'.
Itis calculatedasA=Z+n wherenisthenumberof neutrons.
Each proton and neutron has lamu mass. For example, hydrogen atom has one
proton and no neutron in its nucleus, its mass number A=l+0 =1. Carbon atom has 6
protons and 6 neutrons, hence its mass number A=12. Atomic numbers and mass
numbersofafewelementsaregiveninTable1.5
Example1.1
How manyprotons andneutrons arethereinan atom havingA=238and Z =92.
Solution:
First of all, develop data from the given statement of the example and then solve it with
thehelpofdata.
Data
A=238
Z=92
Number ofprotons ?
Number ofneutrons?
Number ofprotons =Z =92
Table 1.5 Some Elements along with their Atomic and Mass Numbers
13. 11 Unit 1: Fundamentals of ChemistryChemistry - IX
Numberof Neutrons =A-Z
=238 –92
=146
1.2.3 RelativeAtomicMass andAtomicMass Unit
As we know that the mass of an atom is too small to be determined practically.
However, certain instruments enable us to determine the ratio of the atomic masses of
various elements to that of carbon-12 atoms. This ratio is known as the relative atomic
mass of the element. The relative atomic mass of an element is the average mass of the
th
atoms of that element as compared to 1/12 (one-twelfth) the mass of an atom of carbon-
12 isotope (an element having different mass number but same atomic number). Based
th
on carbon-12 standard, the mass of an atom of carbon is 12 units and l/2 of it comes to be
1 unit. When we compare atomic masses of other elements with atomic mass of carbon-
12 atom, they are expressed as relative atomic masses of those elements. The unit for
relative atomic masses is called atomic mass unit, with symbol 'amu'. One atomic mass
th th
unit is 1/12 the mass of one atom of carbon-12 . When this atomic mass unit is
expressedingrams,itis:
For example:
1.2.4 Howto writea ChemicalFormula
Compounds are represented by chemical
formulae as elements are represented by
symbols. Chemical formulae of compounds are
written keeping the following steps in
consideration.
i. Symbols of two elements are written
side by side, in the order of positive ion
firstandnegativeionlater.
ii. The valency of each ion is written
on the right top corner of its
+ 2+
symbol,e.g.Na ,Ca ,CI andO2 .
Test yourself
1.3
It represents
the name of the
substance e.g.
H O (water).2
It tells the
name of the
elements
as present
in the
compound.
It indicates
the mass of the
compound in amus
or grams.
It is in fact
one molecule or
formula unit of
the compound.
It also
represents
one mole of
the molecules
in the balanced
chemical
equation.
Significance
of
chemical
formula
i) How many amu 1 g ofa substancehas?
ii) Is atomicmass unitaSI unitofanatomicmass?
iii) Whatistherelationshipbetweenatomicnumber andatomicmass?
iv) Definerelativeatomicmass.
v) Whyatomicmass ofanatomisdefinedas relativeatomicmass?
14. 12 Unit 1: Fundamentals of ChemistryChemistry - IX
iii. This valency of each ion is brought to the lower right corner of other ion by 'cross-
exchange'method,e.g.
Theyarewrittenas:
iv. If the valencies are same, they are offset and are not written in the chemical
formula. But if they are different, they are indicated as such at the same position,
e.g. in case of sodium chloride both the valencies are offset and formula is written
as NaCl,whereas,calciumchlorideisrepresentedby formulaCaCl .2
v. If an ion is a combination of two or more atoms which is called radical, bearing a
2 3
net charge on it, e.g. SO (sulphate) and PO (phosphate), then the net charge4 4
represents the valency of the radical. The chemical formula of such compounds is
written as explained in (iii) and (iv); writing the negative radical within the
parenthesis. For example, chemical formula of aluminium sulphate is written as
Al (SO ) andthatofcalciumphosphateas Ca (PO ) .2 4 3 3 4 2
1.2.4.1 Empiricalformula
Chemical formulae are of two types. The simplest type of formula is empirical
formula. It is the simplest whole number ratio of atoms present in a compound. The
empirical formula of a compound is determined by knowing the percentage composition
of acompound.However,herewewillexplainitwithsimpleexamples.
The covalent compound silica (sand) has simplest ratio of 1:2 of silicon and
oxygen respectively. Therefore, its empirical formula is SiO . Similarly, glucose has2
simplest ratio 1:2:1 of carbon, hydrogen and oxygen, respectively. Hence, its empirical
formulais CH O.2
As discussed earlier, the ionic compounds exist in three dimensional network
forms. Each ion is surrounded by oppositely charged ions in such a way to form
electrically neutral compound. Therefore, the simplest unit taken as a representative of
an ionic compound is called formula unit. It is defined as the simplest whole number
ratio of ions, as present in the ionic compound. In other words, ionic compounds have
+
only empirical formulae. For example, formula unit of common salt consists of one Na
and one CI ion and its empirical formula is NaCl. Similarly, formula unit of potassium
bromideis KBr,whichis alsoitsempiricalformula.
1.2.4.2 MolecularFormula
15. 13 Unit 1: Fundamentals of ChemistryChemistry - IX
Molecules are formed by the combination of atoms. These molecules are
represented by molecular formulae that show actual number of atoms of each element
present in a molecule of that compound. Molecular formula is derived from empirical
formulaby thefollowingrelationship:
Molecular formula = (Empirical formula)n
Where n is 1,2,3 and so on.
For example, molecular formula of benzene is C H which is derived from the6 6
empiricalformulaCH wherethevalueof nis6.
The molecular formula of a compound may be same or a multiple of the empirical
formula. A few compounds having different empirical and molecular formulae are
shown inTable1.6.
Table 1.6 Some Compounds with their Empirical and Molecular Formulae
Some compounds may have same empirical and molecular formula e.g. water (H 0),2
hydrochloricacid(HC1), etc.
1.2.5 MolecularMass and FormulaMass
The sum of atomic masses of all the atoms present in one molecule of a molecular
substance, is its molecular mass. For example, molecular mass of chlorine (Cl ) is 71.02
amu,ofwater(H O) is 18 amuandthatof carbonoxide(CO )is 44 amu.2 2
Example1.2
Calculatethemolecularmass ofNitricacid,HNO .3
Solution
Atomicmass of H = 1 amu
Atomicmass of N = 14 amu
Atomicmass of O =16 amu
Molecularformula = HNO3
Molecularmass = 1(At.massofH) +1(At.massofN) + 3(At.massofO)
= 1 + 14 + 3(16)
= 1 + 14 + 48
= 63amu
Some ionic compounds that form three dimensional solid crystals, are represented
by their formula units. Formula mass in such cases is the sum of atomic masses of all the
atoms present in one formula unit of a substance. For example, formula mass of sodium
chlorideis 58.5 amuandthatofCaCO is 100 amu.3
16. 14 Unit 1: Fundamentals of ChemistryChemistry - IX
Example1.3
Calculatetheformula mass ofPotassium sulphateK SO2 4
Solution
Atomicmass of K = 39 amu
Atomicmass of S = 32 amu
Atomicmass of O = 16 amu
Formulaunit = K SO2 4
Formulamass of K SO = 2(39) + 1(32) + 4(16)2 4
= 78 + 32 + 64
= 174amu
1.3 CHEMICALSPECIES
1.3.1 Ions (Cations andAnions), MolecularIons and FreeRadicals
Ion is an atom or group of atoms having a charge on it. The charge may be positive
or negative. There are two types of ions i.e. cations and anions. An atom or group of
atoms having positive charge on it is called cation. The cations are formed when atoms
lose electrons from their outermost shells. For example, Na+, K+ are cations. The
followingequationsshow theformationof cationsfromatoms.
An atom or a group of atoms that has a negative charge on it, is called anion.Anion
2
is formed by the gain or addition of electrons to an atom. For example, Cl and O .
Followingexamplesshow theformationofananionbyadditionofelectronstoanatom.
Table 1.7 Difference between Atoms and Ions
Test yourself
1.4
i. Whatistherelationshipbetweenempiricalformulaandformula unit?
ii. How can you differentiate between molecular formula and empirical
formula?
iii. Identify the following formulae as formulas or unit molecular formulae:
H O , CH , C H O ,C H O ,BaCO , KBr2 2 4 6 12 6 12 22 1 3
iv. Whatisempiricalformula ofaceticacid(CH COOH)?3
Findoutitsmolecularmass.
v. Calculatetheformula masses of:
Na S0 , ZnSO andCuCO .2 4 4 3
17. 15 Unit 1: Fundamentals of ChemistryChemistry - IX
1.3.1.1 MolecularIon
When a molecule loses or gains an electron, it forms a molecular ion. Hence,
molecular ion or radical is a species having positive or negative charge on it. Like other
ions they can be cationic molecular ions (if they carry positive charge) or anionic
molecular ions (if they carry negative charge). Cationic molecular ions are more
+ + +
abundant than anionic molecular ions. For example, CH , He , N2 . When gases are4
bombarded with high energy electrons in a discharge tube, they ionize to give molecular
ions.Table1.8 shows somedifferencesbetweenmoleculeandmolecularion.
Table 1.8 Difference between Molecule and Molecular Ion
1.3.1.2 FreeRadicals
Free radicals are atoms or group of atoms possessing odd number of (unpaired)
electrons. It is represented by putting a dot over the symbol of an element e.g. H , CI ,
H C . Free radicals are generated by the homolytic (equal) breakage of the bond between3
two atoms when they absorb heat or light energy. A free radical is extremely reactive
species as it has the tendency to complete its octet. Table 1.9 shows some of the
differencesbetweenions andfreeradicals.
18. Do you know?
16 Unit 1: Fundamentals of ChemistryChemistry - IX
Table 1.9 Difference between Ions and Free Radicals
1.3.2 Types of Molecules
Amolecule is formed by the chemical combinations of atoms. It is the smallest unit
of a substance. It shows all the properties of the substance and can exist independently.
There are different types of molecules depending upon the number and types of atoms
combining.Afewtypesarediscussed here.
A molecule consisting of only one atom is called monoatomic molecule. For
example, the inert gases helium, neon and argon all exist independently in atomic form
andtheyarecalledmonoatomicmolecules.
If a molecule consists of two atoms, it is called diatomic molecule. For example:
hydrogen(H ),oxygen(O ),chlorine(Cl )andhydrogenchloride(HCl).2 2 2
If it consists of three atoms, it is called triatomic molecule. For example :H O and2
CO . If a molecule consists of many atoms, it is called polyatomic. For example: methane2
(CH ),sulphuricacid(H2SO )andglucose(C H O ).4 4 6 12 6
A Molecule containing same type of atoms, is called homoatomic molecule. For
example: hydrogen (H ), ozone (O ), sulphur (S ) and phosphorus (P ) are the examples2 3 8 4
of molecules formed by the same type of atoms. When a molecule consists of different
kindsofatoms, itiscalledheteroatomicmolecule.For example:CO ,H O andNH .2 2 3
Most of the universe exists in the
form of plasma, the fourth state of
matter. Both the cationic and
anionic molecular ions are present
init.
sunlight
sunlight
19. 18 Unit 1: Fundamentals of ChemistryChemistry - IX
23
mass of a substance. Avogadro's Number is a collection of 6.02 10 particles. It is
23
represented by symbol 'N '. Hence, the 6.02 10 number of atoms, molecules orA
formula units is called Avogadro's number that is equivalent to one 'mole' of respective
23
substance. In simple words, 6.02 10 particles are equal to one mole as twelve eggs are
equaltoonedozen.
To understand the relationship between the Avogadro's
number and the mole of a substance let us consider a few
examples.
i.
23
6.02 10 atoms of carbon are equivalent to one mole of
carbon.
ii.
23 2
6.02 10 molecules of H O are equivalent to one mole of
water.
iii.
23
6.02 10 formula units of NaCl are equivalent to one mole
of sodiumchloride.
23 23
Thus, 6.02 10 atoms of elements or 6.02 10 molecules
23
of molecular substance or 6.02 10 formula units of ionic
compoundsareequivalentto1mole.
For further explanation about number of atoms in molecular
compounds or number of ions in ionic compounds let us discuss
twoexamples:
i. One molecule of water is made up of 2 atoms of hydrogen
23
and 1 atom of oxygen, hence 2 6.02 10 atoms of
23
hydrogen and 6.02 10 atoms of oxygen constitute one
moleofwater.
ii. One formula unit of sodium chloride consists of one sodium ion and one chloride
23 23
ion. So there are 6.02 10 number of Na ions and 6.02 10 CI ions in one mole
23
of sodium chloride.Thus, the total number of ions in 1 mole of NaCl is 12.04l0 or
24
1.20410 .
1.5.2 Mole(Chemist secretunit)
23
A mole is defined as the amount(mass) of a substance that contains 6.02 l0
number of particles (atoms, molecules or formula units). It establishes a link between
mass of a substance and number of particles as shown in summary of molar calculations.
Itis abbreviatedas 'mol'.
You know that a substance may be an element or compound (molecular or ionic).
Mass of a substance is either one of the following: atomic mass, molecular mass or
formula mass. These masses are expressed in atomic mass units (amu). But when these
masses areexpressedingrams,theyarecalledas molarmasses.
Scientists have agreed thatAvogadro's number of particles are present in one molar
mass of a substance. Thus, quantitative definition of mole is the atomic mass, molecular
mass or formula mass ofasubstanceexpressed ingrams iscalledmole.
AmaedoAvogadro
(1776-1856) was an
Italian scholar. He is
famous for molecular
theory commonly
known as Avogadro's
law. In tribute to him,
the number of particles
(atoms, molecules,
ions) in mole of a
23
substance 6.02 10 is
k n o w n a s t h e
Avogadro's constant.
20. 19 Unit 1: Fundamentals of ChemistryChemistry - IX
For example:
Atomicmass of carbonexpressedas 12 g =1molofcarbon
Molecularmass of H O expressedas 18 g =1molofwater2
Molecularmass of H SO expressedas 98 g =1molofH SO2 4 2 4
Formulamass of NaClexpressedas 58.5 g =1molofNaCl
Thus, therelationship betweenmoleand mass canbeexpressedas:
Or,
Mass ofsubstance(g) = numberof molesx molarmass
A detailed relationship between a substance and a mole through molar mass and
numberof particlesispresentedhere.
Summaryshowing arelationshipbetweenasubstanceandamole.
SUBSTANCE
Elem
ent
Compound
Atomic
mass
(amu)
mole
(Expressed in g)
(Contains)
(is equivalent to)
23
6.02 x 10
atoms
gram
atomic mass
Molecular
mass (amu)
mole
(Expressed in g)
(Contains)
(is equivalent to)
gram
molecular mass
23
6.02 x 10
molecules
Formula
mass
(amu)
mole
(Expressed in g)
(Contains)
(is equivalent to)
gram
formula mass
23
6.02 x 10
formula units
the
21. of the
20 Unit 1: Fundamentals of ChemistryChemistry - IX
Example1.4
Calculatethegram molecule(number ofmoles)in40gofH PO .3 4
Solution
Therefore,40gramswillcontain0.408 grammolecule(mol)of H PO .3 4
1.6 CHEMICALCALCULATIONS
In chemical calculations, we calculate number of moles and number of particles of a
given mass of a substance or vice versa.These calculations are based upon mole concept.
Letus haveafewexamplesof thesecalculations.
Calculating the number of moles and number of particles from known mass of a
substance.
Firstcalculatethenumberof molesfromgivenmassbyusing equation
Then calculate number of particles from the calculated number of moles with the
helpof followingequation:
1.6.1 Mole-MassCalculations
In these calculations, we calculate the number of moles of a substance from the
known massofthesubstancewiththehelpof followingequation:
When we rearrange the equation to calculate mass of a substance from the number of
molesof asubstanceweget,
Test yourself
1.6
i. Which term is used to represent the mass of 1 mole of molecules of a
substance?
ii. How many atoms are present in one gram atomic mass of a
substance?
iii. Explaintherelationshipbetweenmass andmoleofasubstance.
iv. Findoutthemass of3moles ofoxygenatoms.
v. How many moleculesofwaterarepresentinhalfmoleofwater?
22. 21 Unit 1: Fundamentals of ChemistryChemistry - IX
Example1.5
You have a piece of coal (carbon) weighing 9.0 gram. Calculate the number of moles of
coalinthegivenmass.
Solution
Themass is convertedtothenumberof molesby theequation:
So, 9.0gofcoalis equivalentto0.75mol.
1.6.2 Mole-ParticleCalculations
In these calculations, we can calculate the number of moles of a substance from the given
numberof particles.(Theseparticlesaretheatoms,moleculesorformulaunits).
On rearrangingaboveequationweget,
Summary of MolarCalculations:
Example1.6
Calculate the number of moles, number of molecules and number of atoms present
in6 grams ofwater.
Mass of Substances Number of Particles
mole NA
known mass
molar mass
Mole
mole molar mass
number of particles
NA
Never calculate the number of particles from mass of the substance or vice versa.
Always makecalculationsthroughmoles.
For calculations of the number of atoms in molecular compounds and the number
of ions in ionic compounds; first calculate the number of molecules or formula
unitsandthencalculatethenumberofatomsor ions.
Remember
23. known number of molecules
mol
22 Unit 1: Fundamentals of ChemistryChemistry - IX
Solution
23
Thenumberofmoleculescontainedin6gramsofwaterare1.98 x 10
As weknow 1moleculeof waterconsists of 3 atoms,therefore:
Example1.7
23
There are 3.01 10 molecules of CO present in a container. Calculate the number of2
moles anditsmass.
Solution
Wecancalculatethenumberof moleculesofCO byputtingthevaluesinequation2
Thenby puttingthisvalueinthisequationweget
Test yourself
1.7
i. How many atoms of sodium are present in 3 moles of sodium and what is
themass ofit?
ii. How many atoms arein1amu and1g ofhydrogen(H)?
iii. How many atoms arepresentin16g ofO and 8g ofS?
iv. Is themass of1 moleofO and 1 moleofSsame?
v. Whatdoyoumean by1 atomofCand1gram atom ofC?
vi. If 16 g of oxygen contains 1 mole of oxygen atoms calculate the mass of
oneatom ofoxygeningrams.
vii. How many times is 1 mole of oxygen atom heavier than 1 mole of
hydrogenatom?
viii. Why does 10 g nitrogen gas contain the same number of molecules as 10 g
ofcarbon monoxide?
24. THEMOLECULARITYOFTHEPHYSICALWORLD.
The nature of the physical world as perceived through men's senses
has been investigated in depth. The biggest lesson we learnt in 20th century
is that Chemistry has become central science. It leads to the discovery of
every chemical reaction in any living and non-living thing based on
formation of "molecules". A reaction in the smallest living organism or in
the most developed species like man, always takes place through the process
ofmoleculeformation.Henceitprovidesbasis of"molecularity"ofthephysicalworld.
CORPUSCULAR NATURE OFMATTER.
In 1924 de Broglie put forward the theory of dual nature of matter i.e. matter has both the
properties of particles as well as waves. He explained the background of two ideas. He advocated
that these two systems could not remain detached from each other. By mathematical evidences,
he proved that every moving object is attached with waves and every wave has corpuscular
natureas well.Itformulatedabasis tounderstand corpuscular natureofmatter.
THE WORKS OF DIFFERENT SCIENTISTS AT THE SAME TIME HANDICAP OR
PROMOTE THEGROWTH OFSCIENCE.
Over the course of human history, people have developed many interconnected and
validated ideas about the physical, biological, psychological and social worlds. Those ideas
have enabled successive generations to achieve an increasingly comprehensive and reliable
understanding of the human species and its environment. The means used to develop these ideas
are particular ways of observing, thinking, experimenting and validating. These ways represent
a fundamental aspect of the nature of science and reflect how science tends to differ from other
modes of knowing. It is the union of science, mathematics and technology that forms the scientific
endeavor and that makes it so successful. Although, each of these human enterprises has a
characterand historyofitsown, eachisdependenton and reinforcestheothers.
MOLE -AQUANTITY
Acomputer counting with a speed of 10 million atoms a second would take 2 billion years to
countonemoleofatoms.
If one mole of marbles were spread over the surface of the Earth, our planet would be
coveredbya3milesthicklayerofmarbles.
A glass of water, which contains about 10 moles of water, has more water molecules than
thegrains ofsand intheSahara desert.
Key Points
23 Unit 1: Fundamentals of ChemistryChemistry - IX
Chemistry is study of composition and properties of matter. It has different
branches.
Substancesareclassifiedintoelementsandcompounds.
Elementsconsistofonlyonetypeofatoms.
Compounds are formed by chemical combination of atoms of the elements in a
fixedratio.
Mixtures are formed by mixing up elements or compounds in any ratio. They are
classifiedashomogeneousandheterogeneousmixtures.
25. 24 Unit 1: Fundamentals of ChemistryChemistry - IX
Each atom of an element has a specific atomic number (Z) and a mass number or
atomicmass(A).
AtomicmassofanatomismeasuredrelativetoastandardmassofC-12.
Relative atomic mass of an element is the mass of an element compared with 1/12
massofanatomofC-12isotope.
24
Atomicmassunitis1/12ofthemassofoneatomofC-12, lamu= 1.66l0 g
Empirical formula is the simplest type of chemical formula, which shows the
relativenumberofatomsofeachelementinacompound.
Molecular formula gives the actual number of atoms of each element in a
molecule.
Formula mass is the sum of atomic masses of all the atoms in one formula unit of a
substance.
An atom or group of atoms having a charge on it is called an ion. If it has positive
chargeitis calledacationandifithasnegativechargeitis calledananion.
There are different types of molecules: monoatomic, polyatomic, homoatomic
andheteroatomic.
ThenumberofparticlesinonemoleofasubstanceiscalledAvogadro's
23
number.Thevalueofthisnumberis 6.0210 Itis representedasN .A
23
The amount of a substance having 6.02 10 particles is called a mole. The
quantitative definition of mole is atomic mass, molecular mass or formula mass
expressedingrams.
EXERCISE
Multiple Choice Questions
Put a ( ) on the correct answer
1.
2.
3.
4.
5.
6.
Industrial chemistrydealswith themanufacturing ofcompounds:
(a)inthelaboratory (b)onmicroscale
(c)on commercialscale (d)oneconomicscale
Which one of the following compounds can be separated by physical
means?
(a)mixture (b)element (c)compound (d) radical
Themost abundant elementoccurringintheoceans is:
(a)oxygen (b) hydrogen (c)nitrogen (d)silicon
Which one of the following elements is found in most abundance in the
Earth'scrust?
(a)oxygen (b) aluminium (c)silicon (d)iron
Thethirdabundant gas found intheEarth'satmosphereis:
(a)carbonmonoxide (b)oxygen. (c)nitrogen (d) argon
One amu (atomic mass unit) is equivalent to:
26. 25 Unit 1: Fundamentals of ChemistryChemistry - IX
7.
8.
9.
10.
11.
12.
13.
Whichoneofthefollowingmoleculeisnot tri-atomic?
(a)H (b)O (c)H O (d)CO2 3 2 2
Themass ofonemoleculeof wateris:
(a)18 amu (b)18g (c)18mg (d)18 kg
Themolarmass ofH SO is:2 4
(a)98g (b)98amu (c)9.8g (d)9.8amu
Which one of the following is a molecular mass of O in amu?2
Howmany numberof molesareequivalentto 8 grams of Co ?2
(a)0.15 (b)0.18 (c)0.21 (d)0.24
In which oneofthefollowingpairshas thesamenumberof ions?
(a) 1moleof NaCland1moleofMgCl2
(b) 1/2moleof NaCland1/2moleofMgCl2
(c) 1/2moleof NaCland1/3moleofMgCl2
(d) 1/3moleof NaCland1/2moleofMgCl2
Whichoneofthefollowingpairshas thesamemass?
(a) 1moleof CO and1 moleofN2
(b) 1moleof CO and1 moleofCO2
(c) 1moleof O and1 moleofN2 2
(d) 1moleof O and1 moleofCo2 2
Short answer questions.
1. Defineindustrialchemistryandanalyticalchemistry.
2. How canyoudifferentiatebetweenorganicandinorganicchemistry?
3. Givethescopeofbiochemistry.
4. How doeshomogeneousmixturedifferfromheterogeneousmixture?
5. Whatis therelativeatomicmass?How is itrelatedtogram?
6. Defineempiricalformulawithanexample.
7. Statethreereasons why doyouthinkairisamixtureandwateracompound?
8. Explain why are hydrogen and oxygen considered elements whereas water as a
compound.
9. Whatis thesignificanceofthesymbolofanelement?
10. Statethereasons:softdrinkisamixtureandwateris acompound.
11. Classifythefollowingintoelement,compoundormixture:
i.HeandH ii.CO andCo iii.Waterandmilk2
iv.Gold andbrass v.Ironandsteel
12. Defineatomicmass unit.Whyis itneeded?
27. 26 Unit 1: Fundamentals of ChemistryChemistry - IX
13. State the nature and name of the substance formed by combining the
following:
i. Zinc+ Copper ii.Water+ Sugar
iii. Aluminium+ Sulphur iv.Iron+ Chromium+ Nickel
14. Differentiate between molecular mass and formula mass, which of the
followingshavemolecularformula?
H O, NaCl,KI, H SO2 2 4
15. Whichonehasmoreatoms:10 gofAl or10g ofFe?
16. Whichonehasmoremolecules:9 g ofwateror9 gofsugar (C H O )?12 22 11
17. Whichonehasmoreformulaunits:1 gofNaClor1 g ofKC1?
18. Differentiatebetweenhomoatomicandheteroatomicmoleculeswithexamples.
19. In which one of the followings the number of hydrogen atoms is more? 2 moles
of HC1 or 1 mole of NH (Hint: 1 mole of a substance contains as much number3
ofmolesofatomsasarein1moleculeofasubstance
1. Defineelementandclassifytheelementswithexamples.
2. List five characteristics by which compounds can be distinguished from
mixtures.
3. Differentiatebetweenthefollowingwithexamples:
i. Moleculeandgrammolecule ii.Atomandgramatom
iii.Molecularmass andmolarmass iv.Chemicalformulaand
gramformula
4. Moleis SI unitfortheamountofasubstance.Defineitwithexamples?
1. Sulphuric acid is the king of chemicals. If you need 5 moles of sulphuric acid for
areaction,how manygramsofitwillyou weigh?
2.
2+
Calcium carbonate is insoluble in water. If you have 40 g of it; how many Ca
2
andCO ions arepresentinit?3
3.
23
If you have 6.02 x 10 ions of aluminium; how many sulphate ions will be
requiredtoprepareAl (SO ) ?2 4 3
4. Calculatethenumberofmoleculesinthefollowingcompounds:
a. 16g ofH CO b.20g ofHNO c.30 g ofC H O2 3 3 6 12 6
5. Calculatethenumberofions inthefollowingcompounds:
a. 10g ofAlCl b.30g ofBaCl c.58 g ofH SO3 2 2 4(aq)
6.
16
Whatwillbethemassof2.05l0 moleculesofH SO2 4
7. How manyatomsarerequiredtoprepare60 g ofHNO ?3
8.
+
How manyions ofNa andCl willbepresentin30g ofNaCl?
9. How manymoleculesofHC1 willberequiredtohave10 gramsofit?
10. How many grams of Mg will have the same number of atoms as 6 grams of C
have?
Long Answer Questions.
Numericals
28. Chapter 2
Major Concepts
2.1 Theories and Experiments related
to Atomic Structure
2.2 Electronic Configuration
2.3 Isotopes
Students Learning Outcomes
Students will be able to:
• Describe the contributions that Rutherford made to the development of the
AtomicTheory.
• Explainhow Bohr's atomictheorydiffered.
• Describe the structure of atom including the location of the proton, electron
andneutron.
• Defineisotopes.
• Compareistopesof anatom.
• Discuss thepropertiesoftheisotopesofH, C,CI,U.
• Draw the structure of different isotopes from mass number and atomic
number.
• Statetheimportanceanduses of isotopesinvariousfieldsoflife.
• Describethepresenceofsubshells Ishell.
• Distinguishbetweenshellsandsubshells.
• Writetheelectronicconfigurationoffirst18elementsinthePeriodicTable.
Introduction
Ancient Greek philosopher Democritus suggested that matter is composed of
tiny indivisible particles called atoms. The name atom was derived from the Latin
th
word 'Atomos' meaning indivisible. In the beginning of 19 century John Dalton put
forward Atomic Theory. According to it 'all matter is made up of very small
th
indivisible particles called atoms'. Till the end of 19 century it was considered that
th
atom cannot be subdivided. However, in the beginning of 20 century experiments
performed by Goldstein, J. J. Thomson, Rutherford, Bohr and other scientist
revealed that atom is made up of subatomic particles like electron, proton and
neutron.Propertiesof thesesubatomicparticleswillbediscussed inthischapter.
2.1 THEORIES AND EXPERIMENTS RELATED TO STRUCTURE OF
Structure of Atoms
Time allocation
Teaching periods 16
Assessment periods 03
Weightage 10%
29. (+)
Anode
Beam of electronsBeam of electronsBeam of electrons
to vacuum pump
Battery
ATOM
According to Dalton, an atom is an indivisible, hard,
dense sphere. Atoms of the same element are alike. They
combine in different ways to form compounds. In the light of
Dalton's atomic theory, scientists performed a series of
experiments. But in the late 1800's and early 1900's, scientists
discoverednewsubatomicparticles.
In 1886, Goldstein discovered positively charged
particles called protons. In 1897, J.J. Thomson found in an
atom, the negatively charged particles known as electrons. It
was established that electrons and protons are fundamental
particles of matter. Based upon these observations Thomson
put forth his “plum pudding” theory. He postulated that
atoms were solid structures of positively charge with tiny
negativeparticlesstuckinside.Itis likeplumsinthepudding.
Cathode raysand DiscoveryofElectron
In 1895 Sir William Crooks performed experiments
by passing electric current through gases in a discharge tube at
verylowpressure.
He took a glass tube fitted with two metallic electrode,
which were connected to a high voltage battery. The pressure
4
inside the tube was kept 10 atm. When high voltage current
was passed through the gas, shiny rays were emitted from the
cathode which travel towards the anode as shown in figure
2.1. These rays were given the name of “cathode rays” as
thesewereoriginatedfromthecathode.
Unit 2: Structure of AtomsChemistry - IX 28
J.J. Thomson (1856-
1940) was a British
physicist. He was
awarded the 1906 Noble
Prize in Physics for the
discovery of electron
and for his work on the
conduction of electricity
in gases
Sir William Crooks
(1832-1919) was a
British chemist and
physicist. He was
pioneer of vacuum
tubes. He worked on
spectroscopy.
30. +
+
+
--
() perforated cathode (+) anode
-
Canal Rays Battery
to vacuum pump
The cathode rays were studied in detail and their properties were determined,
whicharegivenbelow:
i. Theserays travelinstraightlinesperpendiculartothecathodesurface.
ii. Theycancastasharpshadow ofanopaqueobjectifplacedintheirpath.
iii. They are deflected towards positive plate in an electric field showing that
theyarenegativelycharged.
iv. Theyraisetemperatureof thebody on whichtheyfall.
v. JJ.Thomsondiscoveredtheircharge/mass(e/m)ratio.
vi. Lightis producedwhentheserays hitthewallsofthedischargetube.
vii. It was found that the same type of rays were emitted no matter which gas
andwhichcathodewas usedinthedischargetube.
All these properties suggested that the nature of cathode rays is independent of
the nature of the gas present in the discharge tube or material of the cathode. The fact that
they cast the shadow of an opaque object suggested that these are not rays but they are
fast moving material particles. They were given the name electrons. Since all the
materials produce same type of particles, it means all the materials contain electrons.As
we know materials are composed of atoms, hence the electrons are fundamental particles
of atoms.
Discoveryof Proton
In 1886 Goldstein observed that in addition to cathode rays, other rays were also
present in the discharge tube. These rays were traveling in opposite direction to cathode
rays. He used a discharge tube having perforated cathode as shown in figure 2.2. He
found that these rays passed through holes present in the cathode and produced a glow on
thewallsof thedischargetube.Hecalledtheseraysas"canalrays".
Thepropertiesoftheserayswereasfollowing:
i. Theseraystravelinstraightlinesinadirectionoppositetothecathoderays.
Unit 2: Structure of AtomsChemistry - IX 29
Fig 2.2 Discharge tube used for the production of canal rays.
31. ii. Their deflection in electric and magnetic field proved that these are
positivelycharged.
iii. The nature of canal rays depends upon the nature of gas, present in the
dischargetube.
iv. These rays do not originate from the anode. In fact these rays are produced
when the cathode rays or electrons collide with the residual gas molecules
presentinthedischargetubeandionizethemasfollows:
v. Mass of these particles was found equal to that of a proton or simple multiple
of it.Themassofaprotonis1840 timesmorethanthatof anelectron.
Thus, these rays are made up of positively charged particles. The mass and
charge of these particles depend upon the nature of the gas in the discharge tube. Hence,
different gases produce different types of positive rays having particles of different
masses and different charges. Keep in mind that positive particles produced by a gas will
be of the same type i.e. positive rays produced by the lightest gas hydrogen contain
protons.
Discoveryof Neutron
Rutherford observed that atomic mass of the element could not be explained on
the basis of the masses of electron and proton only. He predicted in 1920 that some
neutral particle having mass equal to that of proton must be present in an atom. Thus
scientists were in search of such a neutral particle. Eventually in 1932 Chadwick
discovered neutron, when he bombarded alpha particles on a beryllium target. He
observed that highly penetrating radiations were produced. These radiations were called
neutron.
Propertiesof neutronareas following:
i. Neutrons carryno chargei.e.theyareneutral.
ii. Theyarehighlypenetrating.
iii. Mass oftheseparticleswas nearlyequaltothemass ofaproton.
Unit 2: Structure of AtomsChemistry - IX 30
Test yourself
2.1
i. Do youknowanyelementhavingnoneutrons initsatoms?
ii. Who discoveredanelectron,aprotonand a neutron?
iii. How does electron differfrom aneutron?
iv. Explain, how anode rays are formed from the gas present in the
dischargetube?
32. large deflection
repelled
back
small
deflection
majorityofparticles
passundeflected
2.1.1 Rutherford'sAtomicModel
Rutherford performed 'Gold Foil' experiment to understand how negative and
positive charges could coexist in an atom. He bombarded alpha particles on a 0.00004
cm thick gold foil. Alpha particles are emitted by radioactive elements like radium and
2+
polonium. These are actually helium nuclei (He ). They can penetrate through matter to
someextent.
He observed the effects of -particles on a photographic plate or a screen coated
with zinc sulphide as shown in figure 2.3. He proved that the 'plum-pudding' model of the
atomwas notcorrect.
Observationsmadeby Rutherfordwereasfollows:
i. Almostalltheparticlespassed throughthefoilun-deflected.
ii. Out of 20000 particles, only a few were deflected at fairly large angles and
veryfewbouncedbackon hittingthegoldfoil.
Results oftheexperiment
Keeping in view the experiment, Rutherford proposed planetary model for an
atomandconcludedfollowingresults:
Unit 2: Structure of AtomsChemistry - IX 31
Fig 2.3 Scattering of alpha particles by the atoms of gold foil.
33. i. Since most of the particles passed through the foil un-
deflected, therefore most of the volume occupied by an
atomisempty.
ii. The deflection of a few particles proved that there is a
'center of positive charges' in an atom, which is called
'nucleus' of anatom.
iii. The complete rebounce of a few particles show that the
nucleusis verydenseandhard.
iv. Since a few particles were deflected, it shows that the
size of the nucleus is very small as compared to the total
volumeofanatom.
v. Theelectronsrevolvearoundthenucleus.
vi. An atom as a whole is neutral, therefore the number of
electronsinanatomis equaltothenumberofprotons.
vii. Except electrons, all other fundamental particles that lie
withinthenucleus,areknown asnucleons.
Defectsin Rutherford's Model
Although Rutherford's experiment proved that the 'plum-pudding' model of an
atomwas notcorrect,yetithadfollowingdefects:
i. According to classical theory of radiation, electrons being the charged particles
should release or emit energy continuously and they should ultimately fall into
thenucleus.
ii. If the electrons emit energy continuously, they should form a continuous
spectrumbutinfact,linespectrumwas observed.
Although the scientists had objections on the atomic model presented by
Rutherford, yet it cultivated thought provoking ideas among them. They initiated the
questtoanswerthefollowingquestions:
i. How cananatomcollapseorwhy areatomsstable?
ii. Whydoes anatomgivelinespectrum?
iii. Scientists considered there must be another model of atom. It indicated that
Rutherford's modelwas notperfect.
Unit 2: Structure of AtomsChemistry - IX 32
Rutherford was a British-
New Zealand chemist. He
performed a series of
experiments using a -
particles. He won the 1908
Noble Prize in Chemistry.
In 1911, he proposed the
nuclear model of the atom
and performed the first
experiment to split atom.
Because of his great
contributions, he is
considered the father of
nuclear science.
34. 2.1.2Bohr'sAtomicTheory
Keeping in view the defects in Rutherford's Atomic
Model, Neil Bohr presented another model of atom in 1913.
The Quantum Theory of Max Planck was used as foundation
for this model.According to Bohr's model, revolving electron
in an atom does not absorb or emit energy continuously. The
energy of a revolving electron is 'quantized' as it revolves
only in orbits of fixed energy, called 'energy levels' by him.
TheBohr's atomicmodelisshown infigure2.4.
TheBohr's atomicmodelwas basedupon thefollowingpostulates:
i. The hydrogen atom consists of a tiny nucleus and electrons are revolving
inoneof circularorbitsof radius‘r’aroundthenucleus.
ii. Eachorbithasafixedenergy thatis quantized.
iii. As long as electron remains in a particular orbit, it does not radiate or
absorb energy. The energy is emitted or absorbed only when an electron
jumpsfromoneorbittoanother.
iv. When an electron jumps from lower orbit to higher orbit, it absorbs energy
and when it jumps from higher orbit to lower orbit it radiates energy. This
changeinenergy,EisgivenbyfollowingPlanck'sequation
34
Where,his Planck's constantequalto6.63 10 Js, andv is frequencyoflight.
v. Electroncanrevolveonlyinorbitsof afixedangularmomentmvr,givenas:
Where'n' is thequantumnumberororbitnumberhavingvalues1,2,3 andso on.
Unit 2: Structure of AtomsChemistry - IX 33
Neil Bohr was a
Danish physicist who
joined Rutherford in
1912 for his post
doctoral research. In
1913, Bohr presented
his atomic model based
upon Quantum theory.
He won the 1922 Noble
Prize for Physics for
his work on the
structure of an atom.
Fig 2.4 Bohr's atomic model showing orbits.
35. Test yourself
2.2
Summary of differencesbetweentwo theories:
2.2 ELECTRONIC CONFIGURATION
Before discussing electronic configuration let us first understand the concept of
shellsandsubshells.
We have learnt about the structure of atom i.e. it consists of a tiny nucleus lying in
the center and electrons revolving around the nucleus. Now we will discuss how the
electrons revolve around the nucleus? The electrons revolve around the nucleus in
different energy levels or shells according to their respective energies (potential energy).
Theconceptofpotentialenergyof anelectronshallbediscussed inhigherclasses.
Energy levels are represented by 'n' values 1, 2, 3 and so on. They are designated
by the alphabets K, L, M and so on. A shell closer to the nucleus is of minimum energy.
Since K shell is closest to the nucleus, the energy of shells increases from K shell
onwards. Suchas:
Unit 2: Structure of AtomsChemistry - IX 34
Do you know?
Quantum means fixed energy. It is the smallest amount of energy
that can be emitted or absorbed as electromagnetic radiation.
Quanta ispluralofquantum.
In 1918 Noble prize in physics was awarded to German physicist
MaxPlanck(1858-1947) forhisworkonthequantum theory.
Rutherford's Atomic Theory Bohr's Atomic Theory
It was based upon classical theory.
Electrons revolve around the nucleus.
No idea about orbits was introduced.
Atoms should produce continuous
spectrum.
Atoms should collapse.
i.
ii.
iii.
iv.
v.
It was based upon quantum theory.
Electrons revolve around the nucleus in
orbits of fixed energy.
Orbits had angular momentum.
Atoms should produce line spectrum.
Atoms should exist.
i. How was it proved that the whole mass of an atom is located at
itscentre?
ii. How was itshown thatatomicnucleiarepositivelycharged?
iii. Nametheparticleswhichdeterminethemass ofanatom.
iv. What is the classical theory of radiation? How does it differ
from quantum theory?
v. How canyouprovethatangularmomentum isquantized?
st
Hint: Letangular momentum (mvr) of1 orbitis mvr =nh/2
Byputtingthevaluesofh and
36. Test yourself
2.2
Summary of differencesbetweentwo theories:
2.2 ELECTRONIC CONFIGURATION
Before discussing electronic configuration let us first understand the concept of
shellsandsubshells.
We have learnt about the structure of atom i.e. it consists of a tiny nucleus lying in
the center and electrons revolving around the nucleus. Now we will discuss how the
electrons revolve around the nucleus? The electrons revolve around the nucleus in
different energy levels or shells according to their respective energies (potential energy).
Theconceptofpotentialenergyof anelectronshallbediscussed inhigherclasses.
Energy levels are represented by 'n' values 1, 2, 3 and so on. They are designated
by the alphabets K, L, M and so on. A shell closer to the nucleus is of minimum energy.
Since K shell is closest to the nucleus, the energy of shells increases from K shell
onwards. Suchas:
Unit 2: Structure of AtomsChemistry - IX 34
Do you know?
Quantum means fixed energy. It is the smallest amount of energy
that can be emitted or absorbed as electromagnetic radiation.
Quanta ispluralofquantum.
In 1918 Noble prize in physics was awarded to German physicist
MaxPlanck(1858-1947) forhisworkonthequantum theory.
Rutherford's Atomic Theory Bohr's Atomic Theory
It was based upon classical theory.
Electrons revolve around the nucleus.
No idea about orbits was introduced.
Atoms should produce continuous
spectrum.
Atoms should collapse.
i.
ii.
iii.
iv.
v.
It was based upon quantum theory.
Electrons revolve around the nucleus in
orbits of fixed energy.
Orbits had angular momentum.
Atoms should produce line spectrum.
Atoms should exist.
i. How was it proved that the whole mass of an atom is located at
itscentre?
ii. How was itshown thatatomicnucleiarepositivelycharged?
iii. Nametheparticleswhichdeterminethemass ofanatom.
iv. What is the classical theory of radiation? How does it differ
from quantum theory?
v. How canyouprovethatangularmomentum isquantized?
st
Hint: Letangular momentum (mvr) of1 orbitis mvr =nh/2
Byputtingthevaluesofh and
37. N shellcanaccommodate32electrons.
As we know there is a slight difference between the energies of the subshells
within a shell, therefore, filling of electrons in subshells of a shell is such as that V
subshell is filled first and then its p subshell and then other subshells are filled. The
maximumcapacityofsubshells toaccommodateelectronsis:
‘s’subshellcanaccommodate2 electrons.
‘p’subshellcanaccommodate6electrons.
Let us write the electronic configuration of the elements and their ions with the
helpof afewexamples.Keepinmind,weshould know threethings:
i. Thenumberofelectronsinanatom.
ii. Thesequenceofshellsandsubshells accordingtotheenergylevels.
iii. The maximum number of electrons that can be placed in different shells and
subshells.
Example2.1
Write the electronic configuration of an element having 11
electrons.
Solution:
Keep in mind that all electrons do not have the same energy.
Therefore,theyareaccommodatedindifferent
shells according to increasing energy and capacity of the shell.
First of all, the electrons will go to K shell which has minimum energy. It can
accommodate 2 electrons.After this, electrons will go to Lshell that can accommodate 8
electrons. Thus K and L shells have accommodated 10 electrons. The remaining 1
electron will go to M shell, the outermost shell of maximum energy in this case. The
electronicconfigurationwillbewrittenas:
But it is not necessary to write the subshells. Therefore, it is simply written as 2,8 and 1.
Furtherdistributionof electronsinsubshells willbe:
Example2.2
WritedowntheelectronicconfigurationofCl ion
Solution:
We know that chlorine has 17 electrons and chloride ion (Cl ) has
17 + 1 = 18 electrons. Its electronic configuration will be 2, 8,
8, which is presented in the figure. The further distribution of
electronsinsubshells willbe
Example2.3
Anelementhas 5electrons inMshell.Findoutitsatomicnumber.
Unit 2: Structure of AtomsChemistry - IX 36
1
2
8
K
L
M
M2
8 8
K
L
2
8 5
K
L
M
38. Solution:
When there are 5 electrons in M shell, it means K and Lshell are completely filled
with their maximum capacity of 10 electrons. Hence the electronic configuration of the
elementis:
So thetotalnumberofelectronsis 2 +8+5=15
As we know, the number of electrons in an atom is equal to its atomic number.Therefore,
atomicnumberofthiselementis15.
2.2.2 Theelectronicconfigurationof first18 elements
Thesequenceoffillingof electronsindifferentsubshells is as following:
Where number represents the shell number, while letters (s and p) represent subshells.
The superscript shows the number of electrons in a subshell. The sum of superscripts
number is the total number of electrons in an atom. i.e. atomic number of an element.The
electronicconfigurationof first18 elementsisshown intheTable2.1
Table 2.1 Electronic Configuration of First Eighteen Elements
Unit 2: Structure of AtomsChemistry - IX 37
39. 2.3 ISOTOPES
2.3.1 Definition
Isotopes are defined as the atoms of an element that have same atomic number
but different mass numbers. They have same electronic configuration and number of
protons but they differ in the number of neutrons. Isotopes have similar chemical
properties because these depend upon electronic configuration. But they have different
physical properties because these depend upon mass numbers. Most of the elements
have isotopes. Here we will discuss the isotopes of hydrogen, carbon, chlorine and
uraniumonly.
2.3.2 Examples
i) Isotopes of Hydrogen
The naturally occurring hydrogen is combination of its three isotopes, present
indifferentabundances.Thethreeisotopesof hydrogenare named as protium,
deuterium andtritium Each one of them has 1 proton and 1
electron,butnumberofneutronsaredifferentas shown inTable2.2
Theisotopesarerepresentedas:
Unit 2: Structure of AtomsChemistry - IX 38
Test yourself
2.3
protium ( )H1
1
deuterium ( )H2
1
tritium ( )H3
1
i. How many the maximum number of electrons that can be
accommodatedinap-sub shell?
ii. How many subshellsarethereinsecondshell?
iii. Whydoesan electronfirstfill2porbitalandthen3s orbital?
iv. If both K and L shells of an atom are completely filled; how many
totalnumber ofelectrons arepresentinthem?
v. How many electrons canbeaccommodatedinMshell?
vi. Whatistheelectronicconfigurationofa hydrogenatom?
vii. What is atomic number of phosphorus? Write down its electronic
configuration.
viii. If an element has atomic number 13 and atomic mass 27; how many
electrons arethereineachatomoftheelement?
ix. How many electrons will be in M shell of an atom having atomic
number 15,
x. Whatismaximum capacityofa shell?
40. p=6
n=6
p=6
n=7
p=6
n=8
carbon ( C)14
6carbon ( C)13
6carbon ( C)12
6
ii) Isotopes of Carbon
12 13
There are two stable isotopes of carbon C and C and one radioactive isotope
14 12 13 14
C. The isotope C is present in abundance of 98.9 %, while C and C are both present
only 1.1 % in nature. All of them have the same number of protons and electrons but
differinnumberof neutrons.Theyarerepresentedas follows:
iii) Isotopes of Chlorine
Therearetwoisotopesofchlorine,
iv) Isotopes of Uranium
Therearethreeisotopesofuraniumi.e.
innaturenearly99%.
The difference in their number of electrons, protons and neutrons is shown
below:
Table 2.2 Atomic Number, Mass Number, Number of Protons and Neutrons of
H, C, CI and U
APPLICATION OF ISOTOPES
In science and many different technological fields isotopes have vast
applications. The biggest application is in the field of medicine. They are
appliedindiagnosis, radiotherapyandtreatmentofmany diseases likecancer.
Unit 2: Structure of AtomsChemistry - IX 39
41. 2.3.3 Uses
With the advancement of the scientific knowledge, the isotopes have found many
applications in our lives. Following are the major fields in which isotopes have vast
applications:
i. Radiotherapy (TreatmentofCancer)
For the treatment of skin cancer, isotopes like P-32 and Sr-90 are used because
they emit less penetrating beta radiations. For cancer, Co-60, affecting within the body, is
used becauseitemitsstronglypenetratinggammarays.
ii. TracerforDiagnosis and Medicine
The radioactive isotopes are used as tracers in medicine to diagnose the presence
of tumor in the human body. Isotopes of Iodine-131 are used for diagnosis of goiter in
thyroidgland.Similarlytechnetiumisused tomonitorthebonegrowth.
iii. Archaeologicaland GeologicalUses
The radioactive isotopes are used to estimate the age of fossils like dead plants
and animals and stones, etc. The age determination of very old objects based on the half-
lives of the radioactive isotope is called radioactive-isotope dating.An important method
of age determination of old carbon containing objects (fossils) by measuring the
radioactivityofC-14inthemiscalledradio-carbon datingor simplycarbon dating.
iv. ChemicalReactionand StructureDetermination
The radioisotopes are used in a chemical reaction to follow a radioactive element
during the reaction and ultimately to determine the structure. For example: C-14 is used
to label CO . As CO is used by the plants for photosynthesis to form glucose, its2 2
movementisdetectedthroughthevariousintermediatesteps up toglucose.
v. Applications inPowerGeneration
Radioactive isotopes are used to generate electricity by carrying out controlled
nuclear fission reactions in nuclear reactors. For example, when U-235 is bombarded
with slow moving neutrons, the uranium nucleus breaks up to produce Barium-139 and
Krypton-94 andthreeneutrons.
Alarge amount of energy is released which is used to convert water into steam in
boilers.The steam then drives the turbines to generate electricity.This is the peaceful use
of atomicenergyfordevelopmentof anation.
Unit 2: Structure of AtomsChemistry - IX 40
42. TESTING PREVAILING THEORIES BRINGS ABOUT CHANGE IN
THEM
Science is a process for producing knowledge. The process
depends both on making careful observations of phenomenae and inventing
theories for making sense out of those observations. Change in knowledge is
inevitable because new observations may challenge prevailing theories. No
matter how well one theory explains a set of observations, it is possible that another theory may
fit just as well or better, or may fit a still wider range of observations. In science, the testing and
improving and occasional discarding of theories, whether new or old, go on all the time.
Scientists assume that even if there is no way to secure complete and absolute truth, increasingly
accurateapproximationscanbemade toaccountfortheworld andhow itworks.
Key Points
Cathode rays were discovered in last decade of nineteen century. The properties
ofcathoderaysweredeterminedandtheyledtothediscoveryofelectron.
Canal rays were discovered in 1886 by Goldstein . The properties of canal rays
resultedinthediscoveryofprotonintheatom.
Neutronintheatomwas discoveredin1932byChadwick.
First of all structure of an atom was presented by Rutherford in 1911. He
proposed that an atom contains nucleus at the center and electrons revolve around
thisnucleus.
Bohr presented an improved model of an atom in 1913 based upon four
postulates. He introduced the concept of circular orbit, in which electrons
revolve. As long as electron remains in a particular orbit, it does not radiate
energy.Releaseandgainofenergyis becauseofchangeoforbit.
Theconceptofshellsandsubshells isexplained.
Ashellconsists ofsubshells.
Isotopes are defined as the atoms of elements that have the same atomic number
butdifferentatomicmass.
Hydrogen, carbon and uranium have three isotopes each, whereas chlorine has
twoisotopes.
Unit 2: Structure of AtomsChemistry - IX 41
Test yourself
2.4
i. Why do the isotopes of an element have different atomic masses?
ii. How many neutrons are present in C-12 and C-13?
iii. Which of the isotopes of hydrogen contains greater number of
neutrons?
iv. Give one example each of the use of radioactive isotope in medicine
and radiotherapy.
v. How is the goiter in thyroid gland detected?
vi. Define nuclear fission reaction.
vii. When U-235 breaks up, it produces a large amount of energy. How is
this energy used?
viii. How many neutrons are produced in the fission reaction of U-235?
ix. U-235fission produces two atoms of which elements?
43. EXERCISE
Multiple Choice Questions
Put a ( ) on the correct answer
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Whichoneofthefollowingresults inthediscoveryof proton
(a)cathoderays (b) canalrays (c)X-rays (d) alpharays.
Whichoneofthefollowingisthemost penetrating.
(a)protons (b)electrons (c)neutrons (d)alphaparticles
Theconceptof orbitwas used by
(a)J. J.Thomson(b)Rutherford (c)Bohr (d) Planck
Whichoneofthefollowingshellconsists of threesubshells.
(a)O shell (b)N shell (c)Lshell (d)M shell
Whichradioisotopeisused forthediagnosis of tumorinthebody?
(a)cobalt-60 (b)iodine-131 (c)strontium-90 (d) phosphorus-30
When U-235 breaks up, itproduces:
(a)electrons (b)neutrons (c)protons (d)nothing
Thep subshell has:
(a)oneorbital (b)twoorbitals (c)threeorbitals(d)fourorbitals
Deuteriumis used tomake:
(a)lightwater (b)heavywater (c)softwater(d)hardwater
TheisotopeC-12 ispresentinabundance of:
(a)96.9 % (b)97.6% (c)99.7% (d) noneof these
Who discoveredtheproton:
(a)Goldstein (b) J. J.Thomson(c)NeilBohr (d)RutherfordShort
Unit 2: Structure of AtomsChemistry - IX 42
Short answer questions.
1. Whatis thenatureofchargeoncathoderays?
2. Givefivecharacteristicsofcathoderays.
3. Theatomicsymbolofaphosphorus ionisgivenas^P3~
(a) How manyprotons, electronsandneutronsarethereintheion?
(b) Whatis nameoftheion?
(c) Draw theelectronicconfigurationoftheion.
(d) Name the noble gas which has the same electronic configuration as the
phosphorus ionhas.
4. Differentiatebetweenshellandsubshellwithexamplesofeach.
5. An element has an atomic number 17. How many electrons are present in K, L and
M shellsoftheatom?
44. 6.
3+
Write down the electronic configuration ofAl . How many electrons are present in
itsoutermostshell?
7. Magnesiumhaselectronicconfiguration2,8,2,
(a) How manyelectronsareintheoutermostshell?
(b) Inwhichsubshelloftheoutermostshellelectronsarepresent?
(c) Whymagnesiumtendstoloseelectrons?
8. What will be the nature of charge on an atom when it loses an electron or when it
gainsanelectron?
9. For whatpurpose U-235 is used?
10. Apatienthas goiter.How willitbedetected?
11. Givethreepropertiesofpositiverays.
12. WhatarethedefectsofRutherford's atomicmodel?
13. As long as electron remains in an orbit, it does not emit or absorb energy.When does
itemitorabsorbenergy?
1. How arecathoderaysproduced?Whatareitsfivemajorcharacteristics?
2. How was itprovedthatelectronsarefundamentalparticlesofanatom?
3. Draw a labeled diagram to show the presence of protons in the discharge tube and
explainhow canalrayswereproduced.
4. How Rutherford discovered that atom has a nucleus located at the centre of the
atom?
5. One of the postulates of Bohr's atomic model is that angular momentum of a
moving electron is quantized. Explain its meaning and calculate the angular
momentumofthirdorbit(i.e.n=3)
6. How didBohr provethatanatommustexist?
7. What do you mean by electronic configuration? What are basic requirements while
writingelectronicconfigurationofanelement(atom)?
8.
+ 2+ 3+
Describe the electronic configuration of Na , Mg and Al ions. Do they have the
samenumberofelectronsintheoutermostshell?
9. Givetheapplicationsofisotopesinthefieldofradiotherapyandmedicines.
10. Whatis anisotope?Describetheisotopesofhydrogenwithdiagrams.
Unit 2: Structure of AtomsChemistry - IX 43
Long Answer Questions.
45. Chapter3
Major Concepts
3.1 Periodic Table
3.2 Periodic Properties
Students Learning Outcomes
Students will be able to:
• Distinguishbetweenperiodandgroup inthePeriodictable.
• StatethePeriodiclaw.
• Classify elements (into two categories: groups and periods) according to the
configurationof theiroutermostelectrons.
• Determinethedemarcationoftheperiodictableintos-blockand/?-block.
• Explaintheshapeoftheperiodictable.
• Determinethelocationof familiesof theperiodictable.
• Recognize the similarity in the physical and chemical properties of elements
inthesamefamilyoftheelements.
• Identify the relationship between electronic configuration and position of
elementsintheperiodictable.
• Explainhow shieldingeffectinfluencesperiodictrends.
• Describe how electronegativities change within a group and within a period
intheperiodictable.
Introduction
In nineteenth century, chemists devoted much of their efforts in attempts to
arrange elements in a systematic manner. These efforts resulted in discovery of periodic
law. On the basis of this law, the elements known at that time, were arranged in the form
of a table which is known as periodic table. One of the significant features of the table
was that it predicted the properties of those elements which were not even discovered at
that time.The vertical columns of that table were called groups and horizontal lines were
called periods. That orderly arrangement of elements generally coincided with their
Periodic Table and
Periodicity of Properties
Time allocation
Teaching periods 12
Assessment periods 02
Weightage 10%
46. increasing atomic number. The periodic table contains huge amount of information for
scientists.
3.1 PERIODIC TABLE
With the discovery of the periodic table the study of individual properties of the
known elements is reduced to study of a few groups. We will describe various attempts
whichweremadetoclassifytheelementsintoatabularform.
Dobereiner's Triads
A German chemist Dobereiner observed relationship between atomic masses of several
groups of three elements called triads. In these groups, the central or middle element had
atomic mass average of the other two elements. One triad group example is that of
calcium (40), strontium(88) and barium (137). The atomic mass of strontium is the
average of the atomic masses of calcium and barium. Only a few elements could be
arrangedinthisway.Thisclassificationdidnotgetwideacceptance.
Newlands Octaves
After successful determination of correct atomic masses of
elements by Cannizzaro in 1860, attempts were again
initiated to organize elements. In 1864 British chemist
Newlands put forward his observations in the form of 'law of
octaves'. He noted that there was a repetition in chemical
properties of every eighth element if they were arranged by
their increasing atomic masses. He compared it with musical
notes. His work could not get much recognition as no space
was left for undiscovered element.The noble gases were also
notknown atthattime.
Mendeleev'sPeriodicTable
Russian chemist, Mendeleev arranged the known elements
(only 63) in order of increasing atomic masses, in horizontal
rows called periods. So that elements with similar properties
wereinthesameverticalcolumns.
This arrangement of elements was called Periodic Table. He
put forward the results of his work in the form of periodic
law, which is stated as "properties of the elements are periodic functions of their atomic
masses"
Although, Mendeleev periodic table was the first ever attempt to arrange the elements,
yet it has a few demerits in it. His failure to explain the position of isotopes and wrong
order of the atomic masses of some elements suggested that atomic mass of an element
cannotserveas thebasis for thearrangementof elements.
Chemistry - IX 45 Unit 3: Periodic Table and Periodicity of Properties
Mendeleev (1834-1907)
was a Russian chemist
and inventor. He was the
creator of first version of
p e r i o d i c t a b l e o f
elements. With help of
the table, he predicted
t h e p ro p e r t i e s o f
elements yet to be
discovered.
47. PeriodicLaw
In 1913 H. Moseley discovered a new property of the elements i.e. atomic number. He
observed that atomic number instead of atomic mass should determine the position of
element in the periodic table and accordingly the periodic law was amended as
"properties of the elements are periodic function of their atomic numbers". Atomic
number of an element is equal to the number of electrons in a neutral atom. So atomic
numberprovidesthebasis ofelectronicconfigurationsaswell.
ModernPeriodicTable
Atomic number of an element is more fundamental property than atomic mass in
two respects, (a) It increases regularly from element to element, (b) It is fixed for every
element. So the discovery of atomic number of an element in 1913 led to change in
Mendeleev'speriodiclawwhichwas basedon atomicmass.
The modern periodic table is based upon the arrangement of elements according
to increasing atomic number. When the elements are arranged according to increasing
atomic number from left to right in a horizontal row, properties of elements were found
repeating after regular intervals such that elements of similar properties and similar
configurationareplacedinthesamegroup.
It was observed that after every eighth element, ninth element had similar
properties to the first element. For example, sodium (Z=ll) had similar properties to
lithium (Z=3). After atomic number 18, every nineteenth element was showing similar
behaviour. So the long rows of elements were cut into rows of eight and eighteen
elements and placed one above the other so that a table of vertical and horizontal rows
was obtained.
Chemistry - IX 46 Unit 3: Periodic Table and Periodicity of Properties
Do you know?
Test yourself
3.1
Atomic number is a more fundamental property than atomic mass
because atomic number of every element is fixed and it increases
regularly by 1 from element to element. No two elements can have the
same atomicnumber.
I. What was the contribution of Dobereiner towards classification
ofelements?
ii. How Newlandsarranged theelements?
iii. Whointroducedthename PeriodicTable?
iv. WhytheimprovementinMendeleev'speriodictablewas made?
v. StateMendeleev'speriodiclaw.
vi. Whyand how elementsarearranged ina period?
48. Long formofPeriodicTable
The significance of atomic number in the arrangement of elements in the modern
periodic table lies in the fact that as electronic configuration is based upon atomic
number, so the arrangement of elements according to increasing atomic number shows
the periodicity (repetition of properties after regular intervals) in the electronic
configuration of the elements that leads to periodicity in their properties. Hence, the
arrangement of elements based on their electronic configuration created a long form of
periodictableasshown infigure3.1.
The horizontal rows of elements in the periodic table are called periods. The
elements in a period have continuously increasing atomic number i.e. continuously
changing electronic configuration along a period.As a result properties of elements in a
period are continuously changing. The number of valence electrons decides the position
of an element in a period. For example, elements which have 1 electron in their valence
shell occupies the left most position in the respective periods, such as alkali metals.
Similarly, the elements having 8 electrons in their valence shells such as noble gases
alwaysoccupytherightmostpositionintherespectiveperiods.
The vertical columns in the periodic table are called groups. These groups are
numbered from left to right as 1 to 18. The elements in a group do not have continuously
increasing atomic numbers. Rather the atomic numbers of elements in a group increase
withirregulargaps.
But the elements of a group have similar electronic configuration i.e. same
number of electrons are present in their valence shells. For example, the first group
elements have only 1 electron in their valence shells. Similarly, group 2 elements have 2
electrons in their valence shells. It is the reason due to which elements of a group have
similarchemicalproperties.
SalientFeatures of Long FormofPeriodicTable:
i. Thistableconsists ofsevenhorizontalrows calledperiods.
ii. First period consists of only two elements. Second and third periods consist of
8 elements each. Fourth and fifth periods consist of 18 elements each. Sixth
period has 32 elements while seventh period has 23 elements and is
incomplete.
iii. Elementsofaperiodshow differentproperties.
iv. There are 18 vertical columns in the periodic table numbered 1 to 18 from left
toright,whicharecalledgroups.
v. Theelementsofagroup show similarchemicalproperties.
vi. Elements are classified into four blocks depending upon the type of the
subshellwhichgetsthelastelectron.
Chemistry - IX 47 Unit 3: Periodic Table and Periodicity of Properties
49. Key:
Metals
Non metals
Metalloids
Nobel Gases
Black = Solid
Blue = Liquid
Red = Gas
= SyntheticPurple
Colour of box of elements Colour of symbol of elements
13 14
2
3
4
5
6
7
1
1
1
H
2
8
108 110
3
Li
11
Na
19
K
37
Rb
55
Cs
87
Fr
4
Be
12
Mg
20
Ca
38
Sr
56
Ba
88
Ra
3
21
Sc
39
Y
*
**
4
22
Ti
40
Zr
72
Hf
104
5
23
V
41
Nb
73
Ta
105
6
24
Cr
42
Mo
74
W
106
7
25
Mn
43
Tc
75
Re
107
26
Fe
44
Ru
76
Os
27
Co
45
Rh
77
Ir
109
28
Ni
46
Pd
78
Pt
9
29
Cu
47
Ag
79
Au
111
11
30
Zn
48
Cd
80
Hg
112
5
B
13
Al
31
Ga
49
In
81
Tl
113
6
C
14
Si
32
Ge
50
Sn
82
Pb
114
15
7
N
15
P
33
As
51
Sb
83
Bi
115
16
8
O
16
S
34
Se
52
Te
84
Po
116
17
9
F
17
Cl
35
Br
53
I
85
At
117
18
2
He
10
Ne
18
Ar
36
Kr
54
Xe
86
Rn
118
UupUuqUutUubRgDsMtHsBhSgDbRf
57
La
58
Ce
59
Pr
60
Nd
*
Lanthanides
**
Actinides
89
Ac
90
Th
91
Pa
92
U
61
Pm
62
Sm
63
Eu
64
Gd
93
Np
94
Pu
95
Am
96
Cm
65
Tb
66 67
Ho
68
Er
97
Bk
98
Cf
99
Es
100
Fm
69
Tm
70
Yb
71
Lu
101
Md
102
No
103
Lr
Uus UuoUuh
10 12
Light metals
Heavy metals
Non-metals
Nobel
gases
1.0079
6.94
22.99
39.09
85.47
132.90
223.02
9.01
24.30
40.08
87.62
137.33
226.02
44.95
88.90
138.90
227.03
Dy
140.11
232.04
140.91
231.04
144.24
238.03
144.91
237.05
150.36
244.66
151.96
243.06
157.25
247.07
158.92
247.07
162.5
251.08
164.93
252.08
167.26
257.10
168.93
258.10
173.04
259.10
174.97
262.11
47.87
91.22
178.49
261.11
50.94
92.91
180.95
262.11
51.99
95.94
183.84
263.12
54.94
97.91
186.21
262.12
55.84
101.07
190.2
265
58.93
102.91
192.22
266.14
58.69
106.42
195.08
269
63.55
107.87
196.97
272
65.39
112.41
200.59
277
10.81
26.98
69.72
114.82
204.38
284
12.01
28.08
72.61
118.71
207.2
289
14.01
30.97
74.92
121.76
208.98
288
15.99
32.07
78.96
127.60
208.98
292
18.99
35.45
79.90
126.90
209.99
293
4.00
20.18
39.95
83.80
131.29
222.02
294
Fig. 3.1 Modern Periodic Table or long form of the Periodic Table of Elements.
On the basis of completion of a particular subshell, elements with similar
subshell electronic configuration are referred as a block of elements. There are four
blocks in the periodic table named after the name of the subshell which is in the process
of completion by the electrons. These are s, p, d and f blocks as shown in figure 3.2. For
example, elements of group 1 and 2 have valence electrons in ‘s’ subshell. Therefore,
theyarecalleds-blockelementsas shown infigure3.2.
Elements of group 13 to 18 have their valence electrons in subshell. Therefore,
they are referred as p-block elements.The d-block lies between the s and p blocks.While
f-block lies separately at the bottom. d-block constitutes period 4,5 and 6. Each period
consists of ten groups starting from group 3 to group 12. These are called transition
metals.
Chemistry - IX 48 Unit 3: Periodic Table and Periodicity of Properties
50. 13 14
84 5 6 7 9 11
15 16 17
18
10 12
f- block
d- block
p - block
s-block
1
2
3
3.1.1Periods
First period is called short period. It consists of only two elements, hydrogen and
helium. Second and third periods are called normal periods. Each of them has eight
elements in it. Second period consists of lithium, beryllium, boron, carbon, nitrogen,
oxygen, fluorine and ends at neon, a noble gas. Fourth and fifth periods are called long
periods.Eachoneof themconsists of eighteenelements.
Whereas, sixth and seventh periods are called very long periods. In these periods
after atomic number 57 and 89, two series of fourteen elements each, were
accommodated. Because of space problem, these two series were placed separately
below the normal periodic table to keep it in a manageable and presentable form. Since
the two series start after Lanthanum (Z=57) andActinium (Z=89), so these two series of
elements are named as Lanthanides and Actinides respectively. Table 3.1 shows the
distributionofelementsinperiods.
All the periods except the first period start with an alkali metal and end at a noble
gas. It is to be observed that number of elements in a period is fixed because of maximum
number of electrons which can be accommodated in the particular valence shell of the
elements.
Chemistry - IX 49 Unit 3: Periodic Table and Periodicity of Properties
Do you know?
Alchemy! For thousand years alchemy remained field of interest for the
scientists. They worked with two main objectives; change common metals
into gold and second find cure to diseases and give eternal life to people.
They believed all kinds of matter were same combination of four basic
elements. Substances are different because these elements combine
differently. Changing composition or ratio of any one element, new
substances can be formed. The way of making gold from silver or lead was
never found and secret of eternal life was never discovered. However,
many methods and techniques invented by alchemists are still used in
chemistry.
51. Table 3.1 Different Periods of the Periodic Table
*Since new elements are expected to be discovered, it is an incomplete period
3.1.2 Groups
Group 1 consists of hydrogen, lithium, sodium, potassium, rubidium, cesium
and francium.Although elements of a group do not have continuously increasing atomic
numbers, yet they have similar electronic configuration in their valence shells. That is
the reason elements of a group are also called a family. For example, all the group 1
elements have one electron in their valence shells, they are given the family name of
alkalimetals.
The groups 1 and 2 and 13 to 17 contain the normal elements. In the normal
elements, all the inner shells are completely filled with electrons, only the outermost
shells are incomplete. For example, group 17 elements (halogens) have 7 electrons in
theirvalence(outermost)shell.
The groups 3 to 12 are called transition elements. In these elements 'af' sub-shell
isintheprocess ofcompletion.Table3.2shows thedistributionof elementsingroups.
Table 3.2 Different Groups of the Periodic Table
Chemistry - IX 50 Unit 3: Periodic Table and Periodicity of Properties
52. 3.2 PERIODICITYOFPROPERTIES
3.2.1 AtomicSizeandAtomicRadius
As we know that atoms are very small and don't have defined boundaries that fix
their size. So it is difficult to measure the size of an atom.Therefore, the common method
to determine the size of an atom is to assume that atoms are spheres. When they lie close
toeachother,theytoucheachother.
Half of the distance between the nuclei of the two
bonded atoms is referred as the atomic radius of the atom.
For example, the distance between the nuclei of two
carbon atoms in its elemental form is 154 pm, its means its
half77 pmis radiusofcarbonatomas shown inFigure3.3:
When we move from left to right in a period
although atomic number increases, yet the size of atoms
decreases gradually. It is because with the increase of
Chemistry - IX 51 Unit 3: Periodic Table and Periodicity of Properties
Do you know?
Test yourself
3.3
Fire Works
Beautiful fireworks display are common on celebrations like Pakistan Day
or even on marriages. A technology invented in China is used all over the
world. It is dangerous but careful use of various elements and particularly
metal salts of different composition give beauty and colors to the fireworks.
Elements like magnesium, aluminium are used in powdered form. Salts of
sodium give yellow color, calcium - red; strontium-scarlet; barium-green
and copper-bluish green. Usually nitrates and chlorates are used. Other
chemicals are added to give brilliance and different shades. Because of fire
hazard andrisktolifeand property, onlyskilledprofessionalsuse them.
i. How thepropertiesofelementsrepeatafterregularintervals?
ii. Inwhichpatternmodern periodictablewas arranged?
iii. How many elements are in first period and what are their names and
symbols?
iv. How many elementsareplacedin4thperiod?
v. From whichelementlanthanideseries starts?
vi. From whichperiodactinidesseries starts?
vii. How many elements are in 3rd period, write their names and
symbols?
viii. How many periods areconsiderednormal periods?
ix. Whatdo youmean bya group ina periodictable?
x. Whatisthereason ofarranging elementsina group?
xi. Whatdo youmean byperiodicfunction?
xii. Whytheelementsarecalledsorp blockelements?
xiii. Writedownthenames ofelementsofgroup1withtheirsymbols?
xiv. How many members are in group 17, is there any liquid, what is
itsname ?
Fig. 3.3 The radius of carbon atom.
53. atomic number, the effective nuclear charge increases gradually because of addition of
more and more protons in the nucleus. But on the other hand addition of electrons takes
place in the same valence shell i.e. shells do not increase. There is gradual increase of
effective nuclear charge which increases due to addition of protons. This force pulls
down or contracts the outermost shell towards the nucleus. For example, atomic size in
period2decreasesfromLi(152pm)toNe(69pm).
The size of atoms or their radii increases from top to
bottom in a group. It is because a new shell of electrons is
added up in the successive period, which decreases the
effectivenuclearcharge.
The trend of atomic size of transition elements has
slight variation when we consider this series in a period. The
atomic size of the elements first reduces or atom contracts and
then there is increase in it when we move from left to right in
4thperiod.
3.2.2 ShieldingEffect
The electrons present between the nucleus and the outer most shell of an atom,
reduce the nuclear charge felt by the electrons present in the outer most shell. The
attractions of outer electrons towards nucleus is partially reduced because of presence of
inner electrons.As a result valance electron experiences less nuclear charge than that of
the actual charge, which is called effective nuclear charge (Z ). It means that theeff
electrons present in the inner shells screen or shield the force of attraction of nucleus felt
by the valence shell electrons. This is called shielding effect. With increase of atomic
number, the number of electrons in an atom also increases, that results in increase of
shieldingeffect.
The shielding effect increases down
the group in the periodic table as shown in
the figure 3.4. Because of this it is easy to
take away electron from Potassium (Z=19)
than from Sodium (Z=ll) atoms. Similarly
the shielding effect decreases in a period if
wemovefromlefttoright.
Chemistry - IX 52 Unit 3: Periodic Table and Periodicity of Properties
Atomic
radii (pm)
152
186
227
248
265
1 group
elements
Li
Na
K
Rb
Cs
697173757788113152Atomic radii (pm)
nd
2 period elements
Sodium atom Potassium atom
Fig. 3.4: Shielding effect is more in potassium
atom than that of sodium atom.
54. 496 .
3.2.3 Ionization Energy
The ionization energy is the amount of energy required to remove the most
loosely bound electron from the valence shell of an isolated gaseous atom. The amount
of energy needed to remove successive electrons present in an atom increases. If there is
only 1 electron in the valence shell, the energy required to remove it will be called
first ionization energy. For example, the first ionization energy of sodium atom
1
is+496kJmol .
But when there are more than one electrons in the valence shell, they can be
removed one by one by providing more and more energy. Such as group 2 and 3 elements
have more than one electrons in their shells. Therefore, they will have more than one
ionizationenergyvalues.
If we move from left to right in a period, the value of ionization energy increases.
It is because the size of atoms reduces and valence electrons are held strongly by the
electrostatic force of nucleus. Therefore, elements on left side of the periodic table have
low ionization energies as compared to those on right side of the periodic table as shown
nd
forthe2 period.
As we move down the group more and more
shells lie between the valence shell and the nucleus
of the atom, these additional shells reduce the
electrostatic force felt by the electrons present in the
outermost shell. Resultantly the valence shell
electrons can be taken away easily. Therefore,
ionization energy of elements decreases from top to
bottominagroup.
3.2.4 ElectronAffinity
ElectronAffinity is defined as the amount of
energy released when an electron is added in the
outermost shellofanisolatedgaseous atom.
Chemistry - IX 53 Unit 3: Periodic Table and Periodicity of Properties
Ionization energy increasing in a period
Ionization energy
1
(kJmol )
520
496
419
403
377
1
st
group
Ionizationenergydecreasinginagroup
55. Affinity means attraction. Therefore, electron affinity means tendency of an
atom to accept an electron to form an anion. For example, the electron affinity of fluorine
is 328 kJ mol i.e. one mole atom of fluorine release 328 kJ of energy to form one mole
offluorideions.
Let us discuss the trend of electron affinity in the periodic table. Electron affinity
valuesincreasefromlefttorightintheperiod.
The reason for this increase is, as the size of atoms decreases in a period, the
attraction of the nucleus for the incoming electron increases. That means more is
attractionfortheelectron,moreenergywillbereleased.
In a group electron affinity values
decrease from top to bottom because the size of
atoms increases down the group. With the
increase in size of atom shielding effect increases
that results in poor attraction for the incoming
electron i.e. less energy is released out. For
example, as the size of iodine atom is bigger than
chlorine, its electron affinity is less than iodine, as
givenintheadjacenttable.
3.2.5 Electronegativity
The ability of an atom to attract the shared
pair of electrons towards itself in a molecule, is
called electronegativity. It is an important property especially when covalent type of
bondingofelementsis underconsideration.
The trend of electronegativity is same as of ionization energy and electron
affinity. It increases in a period from left to right because higher Z shortens distanceeff
from the nucleus of the shared pair of electrons. This enhances the power to attract the
sharedpairof electrons.For example,electronegativityvaluesof group 2areas follow:
Chemistry - IX 54 Unit 3: Periodic Table and Periodicity of Properties
Electron affinity increasing in a period
03281410060
Electron affinity
1
(kJmol )
2nd
period elements
29 122
Electron affinity
1
(kJmol )
328
Electronaffinitydecreasinginagroup
349
325
295
56. Test yourself
3.3
It generally decreases down a group
because size of the atom increases.Thus attraction
for the shared pair of electrons weakens. For
example, electronegativity values of group 17
(halogens)arepresentedhere.
Chemistry - IX 55 Unit 3: Periodic Table and Periodicity of Properties
i. Defineatomicradius?
ii. WhatareSIunitsofatomicradius?
iii. Whythesize ofatoms decreases ina period?
iv. Defineionizationenergy.
nd
v. Why the 2 ionization energy of an elements is higher than first
one?
vi. Whatisthetrendofionizationenergyinagroup?
vii. Whytheionizationenergyofsodium isless thanthatofmagnesium?
viii. Whyisitdifficulttoremoveanelectron from halogens?
ix. Whatisshieldingeffect?
x. How does shielding effect decrease the forces of electrostatic
attractionsbetweennucleusandoutermost electrons?
xi. Whydoesthebiggersizeatoms havemoreshieldingeffect?
xii. Why does the trend of electron affinity and electronegativity is same
inaperiod?
xiii. Whichelementhas thehighestelectronegativity?
Electronegativity increasing in a period
3.01.61.0Electronegativity 2.0 2.6 3.4 4.0
Electro
negativity
4.0
Electronegativitydecreasinginagroup
3.2
3.0
2.7
Key Points
In nineteenth century attempts were made to arrange elements in a systematic
manner.
Dobereinerarrangedelementsinagroup ofthreecalledtriads.
Newlandsarrangedelementsingroups ofeightlikemusicalnotes.