(http://www.zealcalibrator.com) We are successfully emerged as leading manufacturer & exporter of Electronic Test & Measuring Instruments. Well recognized for precision and accuracy, these find extensive usage in Electrical, Electronic Industries, Calibration as well as Testing laboratories. Our experience of 15 years also allows us to successfully handling demands of Calibrators, Panel Meters, Power Sources and Testers. Other than this, we also offer Repairing & Calibration Services for Electronic Test and measuring Instruments.
The general principle of the FM continuous wave radar level gauge is that the radar emits electromagnetic waves on the top of the tank, and the electromagnetic waves are received by the radar after being reflected by the medium. The frequency difference δf between the received signal and the transmitted signal is proportional to the distance R from the surface of the medium: R=C (speed)*δf (frequency difference)/2/K (frequency modulation slope). Because the speed of light C and the frequency modulation slope K are known, the frequency difference δf can be estimated to obtain the distance R from the radar installation position to the material surface, and then through the known total height of the tank, subtract the spatial distance from the radar to the material surface (referred to as Empty height) to get the height of the material level.
This document provides instructions for operating a digital clamp meter. It includes specifications for the meter such as its display, accuracy, measurement functions, and safety information. The key functions of the meter are described, including how to make current, voltage, resistance, diode, continuity, and non-contact voltage measurements. Battery replacement instructions and safety warnings are also provided.
Hướng dẫn sử dụng Testo 755-1
https://testostore.vn/san-pham/may-do-dong-dien-testo-755-1/
https://testostore.vn/danh-muc/do-dien/may-kiem-tra-dong-dien-dien-ap/
The document describes an electromagnetic flow meter manufactured by BCST Group. It discusses the meter's simple structure with no moving parts, its ability to measure flow without interrupting the fluid, and its high accuracy that is not affected by fluid parameters. It also provides details on the meter's display, data logging and communication capabilities, and lists its technical specifications.
This document is a catalog from Shenzhen Yehai Technology Development Co., Ltd that describes their products. It includes:
- Information about Yehai Technology, which is a major testing and measurement instrument manufacturer in China with advanced manufacturing facilities and quality assurance.
- An overview of their product lines, which include process calibrators, multimeters, thermometers, clamp meters, insulation testers, and environmental meters for industries like electronics, power, food/chem, and more.
- Specifications and descriptions of their loop calibrators, RTD calibrators, multifunction calibrators, process meters, and other digital instruments. It also lists patents held for some of their products.
Cette présentation présente à l'étudiant les concepts de l'e-réputation, son impact sur son image et l'intérêt pour celui-ci de gérer sa présence sur le web.
(http://www.zealcalibrator.com) We are successfully emerged as leading manufacturer & exporter of Electronic Test & Measuring Instruments. Well recognized for precision and accuracy, these find extensive usage in Electrical, Electronic Industries, Calibration as well as Testing laboratories. Our experience of 15 years also allows us to successfully handling demands of Calibrators, Panel Meters, Power Sources and Testers. Other than this, we also offer Repairing & Calibration Services for Electronic Test and measuring Instruments.
The general principle of the FM continuous wave radar level gauge is that the radar emits electromagnetic waves on the top of the tank, and the electromagnetic waves are received by the radar after being reflected by the medium. The frequency difference δf between the received signal and the transmitted signal is proportional to the distance R from the surface of the medium: R=C (speed)*δf (frequency difference)/2/K (frequency modulation slope). Because the speed of light C and the frequency modulation slope K are known, the frequency difference δf can be estimated to obtain the distance R from the radar installation position to the material surface, and then through the known total height of the tank, subtract the spatial distance from the radar to the material surface (referred to as Empty height) to get the height of the material level.
This document provides instructions for operating a digital clamp meter. It includes specifications for the meter such as its display, accuracy, measurement functions, and safety information. The key functions of the meter are described, including how to make current, voltage, resistance, diode, continuity, and non-contact voltage measurements. Battery replacement instructions and safety warnings are also provided.
Hướng dẫn sử dụng Testo 755-1
https://testostore.vn/san-pham/may-do-dong-dien-testo-755-1/
https://testostore.vn/danh-muc/do-dien/may-kiem-tra-dong-dien-dien-ap/
The document describes an electromagnetic flow meter manufactured by BCST Group. It discusses the meter's simple structure with no moving parts, its ability to measure flow without interrupting the fluid, and its high accuracy that is not affected by fluid parameters. It also provides details on the meter's display, data logging and communication capabilities, and lists its technical specifications.
This document is a catalog from Shenzhen Yehai Technology Development Co., Ltd that describes their products. It includes:
- Information about Yehai Technology, which is a major testing and measurement instrument manufacturer in China with advanced manufacturing facilities and quality assurance.
- An overview of their product lines, which include process calibrators, multimeters, thermometers, clamp meters, insulation testers, and environmental meters for industries like electronics, power, food/chem, and more.
- Specifications and descriptions of their loop calibrators, RTD calibrators, multifunction calibrators, process meters, and other digital instruments. It also lists patents held for some of their products.
Cette présentation présente à l'étudiant les concepts de l'e-réputation, son impact sur son image et l'intérêt pour celui-ci de gérer sa présence sur le web.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow and levels of neurotransmitters and endorphins which elevate and stabilize mood.
Petit complément à l'atelier comment gérer les avis clients et sa e-réputation. Trucs, astuces, outils à développer pour améliorer sa visibilité, sa veille et sa e-réputation.
Este documento discute la división de grupos y la participación de sus miembros. Explica que dividir grupos grandes en subgrupos más pequeños puede aumentar la participación al darle a cada persona más tiempo para hablar. También describe estructuras de grupo "tontas" e "inteligentes" y diferentes tipos de interacción entre los miembros de un grupo, como la adición y multiplicación de ideas. Finalmente, presenta varias técnicas aplicables a grupos de trabajo, como la escucha inteligente, tormenta de ideas y los seis sombreros.
La estudiante Daniela Alvarado Delgado vive en Pavas y está cursando su segundo cuatrimestre. Ella trabaja para Laboratorios Stein y una de sus metas es obtener su título de bachiller lo antes posible. Daniela estudió en el INA y el IPC Operaciones Ofimáticas, por lo que espera desarrollar sus habilidades y sacarle el máximo provecho al curso de Computación Aplicada a los Negocios I.
Este documento describe diferentes técnicas para dividir grupos y mejorar la participación, como Phillips 66 y el cuchicheo. Explica que las "estructuras tontas" pierden energía sin lograr objetivos, mientras que las "estructuras inteligentes" suman fuerzas para beneficiar al grupo. También describe tipos de interacción como nula, psicótica y de adición, y recomienda técnicas como escucha inteligente, tormenta de ideas y los seis sombreros para mejorar la dinámica grupal.
El documento presenta una entrevista con Antoni Abad, presidente de la patronal Cecot y de la Red Española de Business Angels. Abad discute la importancia de recuperar valores como el estudio y el esfuerzo para fomentar el espíritu emprendedor en Cataluña. También destaca áreas como la sanidad, la biología y las nuevas tecnologías donde los business angels suelen invertir e insta a cambiar la percepción negativa sobre el fracaso empresarial.
Este documento resume los principales conceptos de varios capítulos sobre administración estratégica. Explica que la administración estratégica es el arte y la ciencia de formular, implementar y evaluar decisiones multifuncionales para ayudar a una organización a lograr sus objetivos a largo plazo. También describe los procesos de evaluación externa e interna, incluido el análisis de las cinco fuerzas competitivas de Porter, para identificar oportunidades y amenazas. Resalta la importancia de declaraciones claras de misión,
The document announces a Designer's Fair in Chennai, India from February 1-3, 2016 to promote collaboration between overseas designers and the Indian leather industry. The fair will provide overseas designers an opportunity to present their design projects to Indian manufacturers. Designers of various leather and non-leather products are invited to exhibit. The organizers will sponsor airfare and hotel accommodations for selected designers and provide them a complimentary booth. The goal is to connect designers with industry and investment opportunities under India's "Make in India" initiative to foster growth in the leather sector.
The document discusses Betty Neuman's systems model and Imogene King's theory of goal attainment. Neuman developed her model to expand nursing's viewpoint beyond the medical model, while King initially aimed to develop a conceptual framework to advance the nursing profession. The major concepts of Neuman's model include a holistic, systems-based approach focusing on environmental stressors. King's theory centers on a conceptual system of goal attainment through nurse-client interactions and perceptions. Both theories view clients as unique and influenced by internal and external factors but differ in their emphases on holism versus goal orientation. Several studies demonstrate the successful application of Neuman's model and King's theory in various nursing contexts and populations.
Unit 4 production, marketing, financial and human resource management of glob...Ganesha Pandian
This document provides an overview of unit 4 which covers production, marketing, financial and human resource management for global businesses. It discusses topics such as global production strategies, location decisions, scale of operations, make or buy decisions, quality considerations, global supply chain issues, international marketing strategies, investment decisions, exchange rate risk management, strategic orientation, and selection of expatriate managers. The document contains several sub-sections on each of these topics with definitions, explanations, and factors to consider. It also lists two references used to prepare the material.
El documento proporciona una introducción general a los componentes de hardware y software de un ordenador, así como a los periféricos. Explica los componentes internos clave como la placa base, la CPU, la memoria RAM y la fuente de alimentación. También describe los dispositivos de entrada y salida como el teclado, el ratón y la impresora. Además, cubre los periféricos de almacenamiento como el disco duro y las unidades ópticas, y los periféricos de comunicación como el módem, la tarjeta de red y los
Inocencio meléndez julio. el interaprendizaje es el elemento sustantivo del...INOCENCIO MELÉNDEZ JULIO
El interaprendizaje es el elemento central de la educación a distancia, permitiendo superar el aislamiento a través de experiencias como el aprendizaje colaborativo y la conectividad. Estas experiencias fomentan valores como la autorrealización, logro intelectual y autoestima. El aprendizaje colaborativo en grupos pequeños y el uso de internet para la conectividad son métodos efectivos que promueven la motivación e interdependencia entre estudiantes.
An Electromagnetic flow meter that can handle low conductivity fluidsManasMicrosystems
Full Bore Electromagnetic Flow Meter by Manas Micro called SROAT-1000 virtually approaches the ideal flow meter suitable for a wide range of liquid flow measurements even with very low conductivities. The meter offers no resistance to flow hence the pressure drop is almost negligible. The measurement is based on Faraday’s law of electromagnetic induction, which is independent of viscosity, density, pressure & temperature of the flowing medium. The measurement is not affected by solid impurities, as long as the minimum conductivity of 5µs/cm is available. We even offer a special model that can work with a minimum conductivity of 2µs/cm. It is a true volumetric flow measurement. We offer various materials of construction for meter lining & electrodes to cover the majority of corrosive liquids.
Model approved with Weights and Measurement Certificate and Seal
Excellent Linearity & Accuracy
Typically better than ± 0.5% Pulse or frequency output is also available optionally.
Measurement is independent of any density, viscosity, pressure, temperature, solid impurities, and conductivity variations (> 5µs/cm). A special model is available that can handle conductivity variations >2µs/cm.
Features
The use of pulsed DC magnetization and the auto-zero technique offers excellent long-term zero stability.
The measurement is independent of the velocity profile across the diameter of the pipeline.
Measurement results are independent of density, viscosity, pressure, temperature, solid-impurities, and conductivity variations [above 5 µs / cm].
No additional pressure drop across the meter relieves the process designer while sizing his pumping requirements. It is simple to install, as no special precautions for straight pipe lengths are required.
Compatible with virtually all corrosive and non-corrosive liquids.
The protection class offered IP 68 for the flow sensor, IP 67 for the transmitter.
Reasonable higher ratio of return on investment to investment.
Applications
Effluent Treatment Plants
Sewage Treatment Plants.
Water Supply Schemes.
Steel & Aluminum.
Sugar Industries & Distilleries.
Pulp & Paper
Chemical / Pharmaceutical.
Petrochemicals / Fertilizers.
Food & Drugs.
High precision-spectroradiometer-integrating-sphere-system-9000b世满 江
The document provides contact and location information for Lisun Electronics Inc., a manufacturer of electrical test instruments. It lists various precision testing devices for properties like light spectrum, color, and electrical parameters. The instruments can test properties of LEDs, lamps, luminaires and other lighting products. It also provides order numbers, specifications and application information for products like spectroradiometers, integrating spheres, power supplies and more.
Lisun Electronics provides a full suite of lighting test instruments including a scientific grade CCD spectroradiometer, integrating spheres, power supplies, and software. The document describes the company's spectroradiometer, optical fibers, power supplies, power meters, AC power sources, integrating spheres, standard lamp sources, and cabinet options for creating a complete LED testing system.
The document provides product information for the Proline Promag 10D electromagnetic flowmeter for measuring conductive liquids like water. Key specifications of the Promag 10D include measurement ranges up to 10 m/s, minimum conductivity of 50 μS/cm, operating temperature up to 60°C, accuracy of ±0.5% of reading, and pressure rating up to 16 bar. The document also provides dimensional drawings, electrical connection diagrams, and price tables for ordering the Promag 10D and additional measurement products.
The pH Conductivity Meters are multi parameter micro processor based highly accurate pH and conductivity meters these type of meters are best when, more than one parameter in the given solution require to be checked and recorded.For More Information Please Logon http://goo.gl/VEvLke
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow and levels of neurotransmitters and endorphins which elevate and stabilize mood.
Petit complément à l'atelier comment gérer les avis clients et sa e-réputation. Trucs, astuces, outils à développer pour améliorer sa visibilité, sa veille et sa e-réputation.
Este documento discute la división de grupos y la participación de sus miembros. Explica que dividir grupos grandes en subgrupos más pequeños puede aumentar la participación al darle a cada persona más tiempo para hablar. También describe estructuras de grupo "tontas" e "inteligentes" y diferentes tipos de interacción entre los miembros de un grupo, como la adición y multiplicación de ideas. Finalmente, presenta varias técnicas aplicables a grupos de trabajo, como la escucha inteligente, tormenta de ideas y los seis sombreros.
La estudiante Daniela Alvarado Delgado vive en Pavas y está cursando su segundo cuatrimestre. Ella trabaja para Laboratorios Stein y una de sus metas es obtener su título de bachiller lo antes posible. Daniela estudió en el INA y el IPC Operaciones Ofimáticas, por lo que espera desarrollar sus habilidades y sacarle el máximo provecho al curso de Computación Aplicada a los Negocios I.
Este documento describe diferentes técnicas para dividir grupos y mejorar la participación, como Phillips 66 y el cuchicheo. Explica que las "estructuras tontas" pierden energía sin lograr objetivos, mientras que las "estructuras inteligentes" suman fuerzas para beneficiar al grupo. También describe tipos de interacción como nula, psicótica y de adición, y recomienda técnicas como escucha inteligente, tormenta de ideas y los seis sombreros para mejorar la dinámica grupal.
El documento presenta una entrevista con Antoni Abad, presidente de la patronal Cecot y de la Red Española de Business Angels. Abad discute la importancia de recuperar valores como el estudio y el esfuerzo para fomentar el espíritu emprendedor en Cataluña. También destaca áreas como la sanidad, la biología y las nuevas tecnologías donde los business angels suelen invertir e insta a cambiar la percepción negativa sobre el fracaso empresarial.
Este documento resume los principales conceptos de varios capítulos sobre administración estratégica. Explica que la administración estratégica es el arte y la ciencia de formular, implementar y evaluar decisiones multifuncionales para ayudar a una organización a lograr sus objetivos a largo plazo. También describe los procesos de evaluación externa e interna, incluido el análisis de las cinco fuerzas competitivas de Porter, para identificar oportunidades y amenazas. Resalta la importancia de declaraciones claras de misión,
The document announces a Designer's Fair in Chennai, India from February 1-3, 2016 to promote collaboration between overseas designers and the Indian leather industry. The fair will provide overseas designers an opportunity to present their design projects to Indian manufacturers. Designers of various leather and non-leather products are invited to exhibit. The organizers will sponsor airfare and hotel accommodations for selected designers and provide them a complimentary booth. The goal is to connect designers with industry and investment opportunities under India's "Make in India" initiative to foster growth in the leather sector.
The document discusses Betty Neuman's systems model and Imogene King's theory of goal attainment. Neuman developed her model to expand nursing's viewpoint beyond the medical model, while King initially aimed to develop a conceptual framework to advance the nursing profession. The major concepts of Neuman's model include a holistic, systems-based approach focusing on environmental stressors. King's theory centers on a conceptual system of goal attainment through nurse-client interactions and perceptions. Both theories view clients as unique and influenced by internal and external factors but differ in their emphases on holism versus goal orientation. Several studies demonstrate the successful application of Neuman's model and King's theory in various nursing contexts and populations.
Unit 4 production, marketing, financial and human resource management of glob...Ganesha Pandian
This document provides an overview of unit 4 which covers production, marketing, financial and human resource management for global businesses. It discusses topics such as global production strategies, location decisions, scale of operations, make or buy decisions, quality considerations, global supply chain issues, international marketing strategies, investment decisions, exchange rate risk management, strategic orientation, and selection of expatriate managers. The document contains several sub-sections on each of these topics with definitions, explanations, and factors to consider. It also lists two references used to prepare the material.
El documento proporciona una introducción general a los componentes de hardware y software de un ordenador, así como a los periféricos. Explica los componentes internos clave como la placa base, la CPU, la memoria RAM y la fuente de alimentación. También describe los dispositivos de entrada y salida como el teclado, el ratón y la impresora. Además, cubre los periféricos de almacenamiento como el disco duro y las unidades ópticas, y los periféricos de comunicación como el módem, la tarjeta de red y los
Inocencio meléndez julio. el interaprendizaje es el elemento sustantivo del...INOCENCIO MELÉNDEZ JULIO
El interaprendizaje es el elemento central de la educación a distancia, permitiendo superar el aislamiento a través de experiencias como el aprendizaje colaborativo y la conectividad. Estas experiencias fomentan valores como la autorrealización, logro intelectual y autoestima. El aprendizaje colaborativo en grupos pequeños y el uso de internet para la conectividad son métodos efectivos que promueven la motivación e interdependencia entre estudiantes.
An Electromagnetic flow meter that can handle low conductivity fluidsManasMicrosystems
Full Bore Electromagnetic Flow Meter by Manas Micro called SROAT-1000 virtually approaches the ideal flow meter suitable for a wide range of liquid flow measurements even with very low conductivities. The meter offers no resistance to flow hence the pressure drop is almost negligible. The measurement is based on Faraday’s law of electromagnetic induction, which is independent of viscosity, density, pressure & temperature of the flowing medium. The measurement is not affected by solid impurities, as long as the minimum conductivity of 5µs/cm is available. We even offer a special model that can work with a minimum conductivity of 2µs/cm. It is a true volumetric flow measurement. We offer various materials of construction for meter lining & electrodes to cover the majority of corrosive liquids.
Model approved with Weights and Measurement Certificate and Seal
Excellent Linearity & Accuracy
Typically better than ± 0.5% Pulse or frequency output is also available optionally.
Measurement is independent of any density, viscosity, pressure, temperature, solid impurities, and conductivity variations (> 5µs/cm). A special model is available that can handle conductivity variations >2µs/cm.
Features
The use of pulsed DC magnetization and the auto-zero technique offers excellent long-term zero stability.
The measurement is independent of the velocity profile across the diameter of the pipeline.
Measurement results are independent of density, viscosity, pressure, temperature, solid-impurities, and conductivity variations [above 5 µs / cm].
No additional pressure drop across the meter relieves the process designer while sizing his pumping requirements. It is simple to install, as no special precautions for straight pipe lengths are required.
Compatible with virtually all corrosive and non-corrosive liquids.
The protection class offered IP 68 for the flow sensor, IP 67 for the transmitter.
Reasonable higher ratio of return on investment to investment.
Applications
Effluent Treatment Plants
Sewage Treatment Plants.
Water Supply Schemes.
Steel & Aluminum.
Sugar Industries & Distilleries.
Pulp & Paper
Chemical / Pharmaceutical.
Petrochemicals / Fertilizers.
Food & Drugs.
High precision-spectroradiometer-integrating-sphere-system-9000b世满 江
The document provides contact and location information for Lisun Electronics Inc., a manufacturer of electrical test instruments. It lists various precision testing devices for properties like light spectrum, color, and electrical parameters. The instruments can test properties of LEDs, lamps, luminaires and other lighting products. It also provides order numbers, specifications and application information for products like spectroradiometers, integrating spheres, power supplies and more.
Lisun Electronics provides a full suite of lighting test instruments including a scientific grade CCD spectroradiometer, integrating spheres, power supplies, and software. The document describes the company's spectroradiometer, optical fibers, power supplies, power meters, AC power sources, integrating spheres, standard lamp sources, and cabinet options for creating a complete LED testing system.
The document provides product information for the Proline Promag 10D electromagnetic flowmeter for measuring conductive liquids like water. Key specifications of the Promag 10D include measurement ranges up to 10 m/s, minimum conductivity of 50 μS/cm, operating temperature up to 60°C, accuracy of ±0.5% of reading, and pressure rating up to 16 bar. The document also provides dimensional drawings, electrical connection diagrams, and price tables for ordering the Promag 10D and additional measurement products.
The pH Conductivity Meters are multi parameter micro processor based highly accurate pH and conductivity meters these type of meters are best when, more than one parameter in the given solution require to be checked and recorded.For More Information Please Logon http://goo.gl/VEvLke
The Analytical Microprocessor Based Conductivity Meter is highly developed microprocessor based conductivity meter with computer connectivity which makes it ideal for analytical usages in testing and research, laboratories and manufacture plants. This microprocessor based table top conductivity meter is capable of measuring Conductivity, Resistivity, TDS, Salinity and Temperature with an Ion selective electrode with immense accuracy. For More Information Please Logon http://goo.gl/VWoU0I
ZC-102 Transformer comprehensive tester can measures of CT, I-V curve and curve, 5%, 10% error curve according to the polarity of the national standard, DC resistance, and ratio
Catalog Kansai ALN AMP SL series, Beeteco.com
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Water is the most vital utility in any industry, hence Manas has produced an affordable variety of electromagnetic flowmeters for accurate water flow measurement.
Wafer Style electromagnetic Flow Meter, called Jal-Oagh provides the solution to knowing your water use, not only by guesswork but by proper instrumentation with economy and fairly good accuracy.
Sizes available for Wafer Type are DN 50 to DN 200
CNG Flow Meter
How does CNG Flow Meter work?
One of the popular CNG flow meters is a Thermal Mass Flow Meter. Whenever a fluid of a certain temperature is passed over any substance hotter than the fluid, the heat of the hot substance is taken away because of forced convection by the fluid, and the temperature of that substance drops. This fall in temperature is related to the mass flow of the fluid passing over the substance. If one can measure the amount of heat taken away by the flowing fluid one can calculate the mass flow rate.
https://manasmicro.com/mass-flow-meter/
The document provides information on electromagnetic flow meters, including:
- An overview of features, applications, and operating conditions. Electromagnetic flow meters measure conductive fluids through electromagnetic induction and have no moving parts.
- Descriptions of key components like sensors, converters, and wiring. Sensors produce a voltage signal from fluid flow within a pipeline. Converters power the sensors and process output signals.
- Specifications covering performance metrics, materials, pressures, temperatures, outputs, and more. Accuracy is ±0.5% above 0.8m/s. Outputs include current, frequency, pulse, and alarms.
- Guidelines for selecting nominal diameter and flow rates to match pipeline and fluid characteristics. Flow
AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. Canopus Instruments offers the highly capable AC Voltage and Current Transducers. Order your machine now!
Visit:
http://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/powerline-transducers-ac-voltage-current-converter-90-270vac-supply/
AWgage-150 measures sheet resistance in ohms per square or milliohms per square. If specific resistivity is known, the thickness of the deposited film layer can be computed from the sheet resistance. The choice of measurement data is easily get in the software. AWgage-150 can accommodate 150mm (6″) wafers as well as the standard 2″, 3″,4″, 5″ wafers without any hardware change.
Allwin21 AWgage-150 Features:
30 years proven Eddy Sheet Resistance Measurement technologies.
Non-contact Sheet Resistance Measurement technologies.
1mΩ/square to 19,990 Ω/square measurement range capability
Touch Screen Monitor and PC w/ Advanced Allwin21 control software.
Wafer carriage travel programmed with internal encoder step motor , without encoder disk.
Consistent wafer-to-wafer process cycle repeatability.
Small footprint and energy efficiency.
Made in U.S.A.
Specifications:
Test Sights: Single center-point, 5-point, or 9-point.5-9
Highly Conductive or Metal Sheet Resistance:
1 to 1,999 mΩ/square
1 to 1,999 Ω/square
Or
10 to 19,990 Ω/square
Highly Conductive or Metal Film ThicknessMinimum: 100 ÅngströmMaximum: Proportional to resistivity. Maximum for a resistivity of 2.7 mW-cm is 270 kÅ (27 mm
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Datasheet DO5000 Series - Portable Digital Micro OhmmeterPT. Siwali Swantika
This document describes the D05000 series of digital microhmmeters. It has several key features including 4-terminal measurement to eliminate lead resistance errors, measurement ranges from 3 milliohms to 30 kilohms, resolutions as low as 100 nanohms, temperature compensation, data logging and statistical analysis capabilities, programmable test currents, and limit detection. The series includes mains and battery powered models with different current ranges suitable for various applications.
To meet EU ErP requirements, IEC60969 Self-ballasted Lamps for General Lighting Services Performance requirements and Energy Star about Lamp Start, Run-up Time and Flicker Test.
Thyristor controllers and solid state relay concept & applicationsVidyadharK
Basic Concept, Applications, Specifications of Thyristor Power Controllers, Solid State Relays
For more details visit us at http://www.savikenterprises.in
Similar to Cheemi e catalogue for hall effect sensors (20)
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
1. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Cheemi is specialized in development and commercialization of monitoring & measuring solution
innovation, with more than 100 workers, 5200 ㎡ non-dust workshop, 12 years experience in
current measurement, ISO, CE & RoSH certificated, one and half hours reach Shanghai port. This is
how we keep good quality and competitive prices for global valued customers.
Cheemi provides the most effective and reliable sensor solutions which involve
Open & Closed Loop Hall Effect Current & Voltage Sensors, Current Transmitter, Leakage
Transducer; completely replace LEM hall sensors with excellent quality and performance.
Hall Proximity Sensors, Inductive sensors, Photoelectric Proximity Sensors;
Equivalent to OMRON Proximity Sensors.
Temperature sensors: PT100 series sensor, Temperature Transmitter, Thermocouples/RTD
Current Transformers and Potential Transformers
For more information, please visit our website: www.cheemi-tech.com
2. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
1.Open Loop Hall Effect Current Sensor
Principle
Hall Effect Open Loop Current Sensor is a current measurement device which develops on base of the hall effect
principle, wherein a Hall-effect device
(HED) produces an output voltage linearly
related to the amplitude and phase of a
magnetic field applied to it.
Advantages
Easy installation
Can be customized
No insertion losses
Low power consumption
Wide current measuring range
High immunity to external interference
2.Closed Loop Hall Effect Current Sensor
Principle
Hall Effect Close Loop Current Sensor develops on the principles of the Magnetoresistive or Hall effects, and the
null balance or zero magnetic flux method.
Primary current Ip provides the magnetic flux which will be balanced by a complementary flux produced by driving
a current through the secondary winding, so the positive and negative magnetic field reaches balance to detect the
current.
In other words, the secondary current, IS,
creates a flux equal in amplitude, but opposite
in direction, to the flux created by the primary
current.This current can be expressed as a
voltage by passing it through a resistor.
Advantages
High accuracy
Very good linearity
Easy installation
Can be customized
Low temperature drift Optimized response time, no insertion losses
Low power consumption High immunity to external interference
3. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
3.Hall Effect Voltage Sensor
Principle
The principles of Hall Voltage Sensor is the same as the closed loop hall current sensor, but need to convert the
voltage of the primary terminal to current through the resistor R1.So the hall voltage sensor is also used to test
current signal, and the output compensation current/offset current can accurately reflect the changes of primary
voltage signal. To select the right R1 value, please choose different sensors based on the test voltage and power.
Advantages
High accuracy
Very good linearity
Easy installation
Can be customized
Low temperature drift
High immunity to external
interference
4.Current Transmitter/Transducer
Principle
Current transmitter is a current measurement device which develops on base of the hall effect principle. It can
accurately measure various types of DC, AC voltage, which is widely used in the electrical power supply,
communication power and other fields.
Advantages
Easy installation
Can be customized
No insertion losses
Low power consumption
Wide current measuring range
High immunity to external interference
5.DC Leakage Current Transducer
Principle
DC Leakage Current Sensor develops based on magnetic modulation closed loop principle, to measure tiny
current (mA level). DC leakage current measuring range can reach 0~±200mA.
4. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Advantages
High accuracy
Very good linearity
Wide current measuring range
Can be customized
Optimized response time
Low power
consumption
High immunity to external interference
6.Naming rules PART NUMBER CODING
13. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Proximity Sensor Series
Hall Proximity Sensor:H-JK/JB/JZ----C Series
Introduction
Principle:H-JK series hall proximity switch is a new type of
automatic switching device based on the principle of hall effect.
This product adopts the round tube shaped waterproof design,
Application: It reaches IEC144 standard and widely used in
light industry, chemical industry, textile, printing, machinery,
metallurgy, telecommunications, transportation, automatic
control, computer and other fields.
It is divided into three categories according to the working
state :
JK - normally open type,
JB - normally closed type,
JZ - self - lock type.
Features:
High response frequency, strong anti-interference
ability
High precision - repeat positioning.
Multi-function for protection with working status
indicator.
Can be directly interface with the programming
controller (PLC).
High reliability, long lifespan.
Case Type Model
Supply
Voltage
(DC:V)
Working
Distance
(mm)
Positioning
Accuracy
(mm)
Response
Frequency
(KHz)
Working
Temperatur
e
Output
Mode
M6
JK5002C DC5-24 5-7 0.02 100 Ⅰ/ Ⅱ NPN
JK8002C DC5-24 8-11 0.02 100 Ⅰ/ Ⅱ NPN
M8
JK5002C DC5-24 5-7 0.02 100 Ⅰ/ Ⅱ NPN/PNP
JK8002C DC5-24 8-11 0.02 100 Ⅰ/ Ⅱ NPN/PNP
M10
JK5002C DC5-24 5-7 0.02 100 Ⅰ/ Ⅱ NPN/PNP
JK8002C DC5-24 8-11 0.02 100 Ⅰ/ Ⅱ NPN/PNP
M12
JK5002C DC5-24 5-7 0.02 100 Ⅰ/ Ⅱ NPN/PNP
JK8002C DC5-24 8-11 0.02 100 Ⅰ/ Ⅱ NPN/PNP
Hall Proximity Sensor:H-JK/JB/JZ----D Series
M12
JK5002D DC5-30 5-7 0.02 100 Ⅰ/ Ⅱ NPN/PNP
JK8002D DC5-30 8-11 0.02 100 Ⅰ/ Ⅱ NPN/PNP
JK5020D DC5-30 5-7 0.02 50 Ⅰ/ Ⅱ NPN/PNP
JK8020D DC5-30 8-11 0.02 50 Ⅰ/ Ⅱ NPN/PNP
14. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
JK5050D DC5-30 5-7 0.02 50 Ⅰ/ Ⅱ NPN/PNP
JK8050D DC5-30 8-11 0.02 50 Ⅰ/ Ⅱ NPN/PNP
JK5100D DC5-30 5-7 0.02 50 Ⅰ/ Ⅱ NPN/PNP
JK8100D DC5-30 8-11 0.02 50 Ⅰ/ Ⅱ NPN/PNP
1)The supporting magnet steel adopts the S surface of Φ8×4 Ndfeb magnets(surface magnetic induction intensity is
0.3T) ;other magnet is also available, but the working distance will change.
2) Series of JK/JB/JZ are using three-core sheath cable with length of 50cm. If there isn’t clear requirement for the output
polarity,please refer to the way of NPN.
3) Working Temperature(℃): Ⅰ: -40~+125; Ⅱ: -25~+85;
4)Both the configuration parameters and the cable length can be customized.
5)Please state the full part number on the order,such as JK8002CⅡ.
Inductive Proximity Sensor: LJK/LJB Series DC Cylinder-shaped Sensor
Introduction
Principle: Inductive Proximity Switches are developed based
on a coil and high frequency oscillator that creates a field in
the close surroundings of the sensing surface. The presence of
metal in the operating area causes a change in the oscillation
amplitude. This change is identified by a threshold circuit,
which changes the output of the sensor.
Standard Detected Object: Inductive proximity sensors detect
the presence, movement and position of metallic objects.
The operating distance of the sensor depends on the coil’s size
as well as the target’s shape, size and material.
It is divided into two categories according to the working
state :
JK - normal open type,
JB - normal closed type
Features:
Contactless detection of metal objects, to avoid
damage to the sensor itself and the target.
No contact output, high reliability, stable operation
and long service life
High repeatability positioning accuracy and excellent
measurement accuracy
Small sensor, flexible installation.
Case Type Model Supply Detection Standard Response Working Output Mode
15. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Voltage (V) Distance
(mm)
Detected
Object (Iro
n: mm)
Frequenc
y(KHz)
Temperature
Sensors embedded
in
metal
Sensors not
embedded in metal
ΦM12*60
LJK-M-D2N DC5-30 2±10% 12*12*1 1 Ⅱ NPN/PNP
LJK-M-D2P DC5-30 2±10% 12*12*1 1 Ⅱ NPN/PNP
LJK-M-D2L DC5-30 2±10% 12*12*1 1 Ⅱ
DC
two-wire
LJK-D4N DC5-30 4±10% 15*15*1 1 Ⅱ NPN/PNP
LJK-D4P DC5-30 4±10% 15*15*1 1 Ⅱ NPN/PNP
LJK-D4L DC5-30 4±10% 15*15*1 1 Ⅱ
DC
two-wire
Sensors embedded
in
metal
Sensors not
embedded in metal
ΦM18*60
LJK-M-D4N DC5-30 4±10% 18*18*1 1 Ⅱ NPN/PNP
LJK-M-D4P DC5-30 4±10% 18*18*1 1 Ⅱ NPN/PNP
LJK-M-D4L DC5-30 4±10% 18*18*1 1 Ⅱ
DC
two-wire
LJK-D8N DC10-30 8±10% 30*30*1 1 Ⅱ NPN/PNP
LJK-D8P DC10-30 8±10% 30*30*1 1 Ⅱ NPN/PNP
LJK-D8L DC10-30 8±10% 30*30*1 1 Ⅱ
DC
two-wire
Sensors embedded
in
metal
Sensors not
embedded in metal
ΦM30*60
LJK-M-D10N DC5-30 10±10% 30*30*1 1 Ⅲ NPN/PNP
LJK-M-D10P DC5-30 10±10% 30*30*1 1 Ⅲ NPN/PNP
LJK-M-D10L DC5-30 10±10% 30*30*1 1 Ⅲ
DC
two-wire
LJK-D15N DC5-30 15±10% 45*45*1 1 Ⅲ NPN/PNP
LJK/-D15P DC5-30 10±10% 45*45*1 1 Ⅲ NPN/PNP
LJK-D15L DC5-30 10±10% 45*45*1 1 Ⅲ
DC
two-wire
Structure Parameter
16. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Type Diagram(Unit:mm) Dimension A B C D
Sensors embedded
in metal
M12 M12×1 35 52
M18 M18×1 45 57
M30 M30×1 45 63
Sensors not
embedded in metal
M12 M12×1 35 57 6
M18 M18×1 45 72 10
M30 M30×1 45 72 10
Connection
Remarks:
1)Inductive proximity sensors detect the metallic objects,
2)The detection distance may fluctuate with the different materials of the
detected target.
3)Working Temperature(℃): Ⅰ: -40~+125℃; (not frozen)
Ⅱ: -25~+85℃;(not frozen)
Ⅲ:-10℃~+70℃ (not frozen)
4)Both the configuration parameters and the cable length can be
customized. Standard cable length 1.5M.
5)If no explicit requirement for the output polarity, the proximity sensor
will be supplied based on NPN mode.
6)Please state the full part number on the order, such as LJK-M-D2NⅡ.
Case Type Model
Supply
Voltage
(V)
Detection
Distance
(mm)
Standard
Detected
Object (Iro
n: mm)
Response
Frequency
(KHz)
Working
Temperature
Output Mode
Sensors not
embedded in
metal
M12
LJK-A4G AC90-250 4 18*18*1 1 Ⅲ
AC
two-wire
Sensors not
embedded in
metal M18
LJK-A8G AC90-250 8 30*30*1 1 Ⅲ
AC
two-wire
Inductive Proximity Sensor: L-JK/JB Series AC Cylinder-shaped Sensor
17. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Inductive Proximity Sensor: L-JK/JB Series DC Square-shaped Sensor
Case Type Model
Supply
Voltage (V)
Detection
Distance
(mm)
Standard
Detected
Object (Ir
on: mm)
Response
Frequency
(KHz)
Working
Temperature
Output Mode
L-JK12M5N DC10-30 2/4 12*12*1 1 Ⅱ NPN/PNP
L-JK17M5N DC10-30 4/8 17*17*1 1 Ⅱ NPN/PNP
L-JK12D5L DC10-30 2/4 12*12*1 1 Ⅱ
DC
two-wire
L-JK17D5L DC10-30 4/8 17*17*1 1 Ⅱ
DC
two-wire
Structure parameter
Type Diagram(Unit:mm) Dimension A B C D
Sensors not
embedded in metal
12*12*45
M12 M12×1 35 57 6
M18 M18×1 45 72 10
Connection
NPN
PNP
DC Two-wire
Remarks:
1)Inductive proximity sensors detect the metallic objects,
2)The detection distance may fluctuate with the different
materials of the detected target.
6)Both the configuration parameters and the cable length can be
customized. Standard cable length 1.5M.
7)If no explicit requirement for the output polarity, the
proximity sensor will be supplied based on NPN mode.
6 ) Please state the full part number on the order, such as
LJK-A4GⅢ or L-JK12M5NⅡ.
18. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Magnetic Proximity Sensor/Switch
MJK/MJB/MJKB Series
Introduction
Principle: Magnetic switch is also called the magnetron,
which is a switching element controlled by the magnetic
field signal. Disconnect once non-magnetic.
Magnetic switches are used to detect circuit or the state of
mechanical movement and widely applied in Security Door,
household doors, printers, fax machines, telephones and
other electronic equipment.
Working state :
MJK - Normal Open type,
MJB - Normal Close type,
SPDT MJKB type.
Features:
Small size, light weight, easy installation
Good insulation performance, suitable for all kinds
of complex environment
Long life-span, high reliability and high stability.
Customized service available
Case Type Model
Supply
Voltage
(DC:V)
Max. Power
Max.
Power
Max.
Switching
Current
Min.
Breakdown
Voltage
Max.
Load
Current
M6
MJK/B/KB-
DC5-24
V
10W DC100V 0.5A DC200V 1.0A
M8
DC5-24
V
10W DC100V 0.5A DC200V 1.0A
M10
DC5-24
V
10W DC100V 0.5A DC200V 1.0A
M12
DC5-24
V
10W DC100V 0.5A DC200V 1.0A
M18
DC5-24
V
10W DC100V 0.5A DC200V 1.0A
MJK/B/KB-23
DC5-24
V
10W DC100V 0.5A DC220V 1.0A
MJK/B/KB-30
DC5-24
V
10W DC100V 0.5A DC220V 1.0A
MJK/B/KB-48
DC5-24
V
10W DC100V 0.5A DC220V 1.0A
1) Series of MJK, MJB are using two-core sheath cable, MJKB series apply three-core sheath cable with length of 50cm. If
there isn’t clear requirement for the output polarity,please refer to the way of NPN.
19. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
3) Working Temperature(℃):-25~+85℃;
4)Both the configuration parameters and the cable length can be customized.
5)Please state the full part number on the order,such as MJK-M6.
Temperature Sensors
PT100 series RTD Temperature Sensor
Introduction
Principle: PT100 series thermal resistance
temperature sensor develops based on the principle
that RTD changes with temperature, and presenting a
certain functional relation.
Application: Usually PT100 series RTD Temperature
Sensors are matched with temperature transmitter,
display instrument and computer to directly measure
the temperature of liquid, gas and solid surface
ranging from -200℃~500℃ during the production
process.
Features:
Anti vibration, good stability, high accuracy
High anti-pressure ability
Graduation: PT100、PT1000 optional
Explosion-proof grade: ExiaⅡCT4(intrinsic safety type)
Case Type
Case
Type
Graduat
ion
Measuring
Range(℃)
Accuracy
Class
Tolerance(Δ℃)
Output
Mode
Therm
owell
Materi
al
WZP
Pt20
-200~
+500
1/3DIN ±(0.10+0.0017|t|)
two-wire
system/
three wire
system
Stainles
s steel
A level ±(0.15+0.0002|t|)
B level ±(0.30+0.0005|t|)
2B level ±(0.60+0.0010|t|)
pt100
1/3DIN ±(0.10+0.0017|t|)
A level ±(0.15+0.002|t|)
B level ±(0.30+0.005|t|)
2B level ±(0.60+0.0010|t|)
Pt500
1/3DIN ±(0.10+0.0017|t|)
A level ±(0.15+0.002|t|)
B level ±(0.30+0.005|t|)
2B level ±(0.60+0.0010|t|)
Pt1000
1/3DIN ±(0.10+0.0017|t|)
A level ±(0.15+0.002|t|)
B level ±(0.30+0.005|t|)
2B level ±(0.60+0.0010|t|)
20. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Temperature Transmitter
Introduction
SBWR/Z Series Temperature Transmitter is used with
Industrial thermocouple and RTD.
It applies two-wire transmission mode (two wires as the
common transmission line of power input and signal output )
to convert thermocouple and RTD signals into output signal
4~20mA.
The series products has been widely used in industrial
control field.
Features:
Can be directly installed in the sensor terminal box
Accurate signal can be transmitted far way(Max
1000M)
High long-term stability, maintenance-free
Case Type Model Input Signal
Measuring
Range(℃)
Tolerance
Measuring
Range(V)
Output Mode
Output
Load
(Ω)
SBWZ
Thermocouple
K E J B S T N
RTD: PT20
PT100 PT500
PT1000
-200~1800
0.2%FS
DC24±10% 4~20mA
250
SBWR 0.2%FS 250
Thermocouple/RTD
Introduction
Thermocouple/RTD is usually used with display instrument,
recording instrument and computer to directly measure the
temperature of liquid, gas and solid surface ranging from 0℃~
1800℃ during the production process.
Features:
Simple matching for easy replacement
Pressure spring type temperature sensing element,
high anti-vibration performance
Wide measuring range
High mechanical strength, excellent pressure
resistance.
Case Type Model Input Signal
Measuring
Range
(℃)
Accurac
y Class
Tolerance(Δ℃)
Output
Mode
Output
Load
(Ω)
Model
Thermocouple
K E J B S T N
-200~
1800
A level ±(1.5+0.004|t|)
two-wire
system/
three wire
system
Stainles
s steel
B level ±(2.5+0.0075|t|)
WZPK
RTD
PT20 PT100
PT500 PT1000
1/3DIN ±(0.10+0.0017|t|)
A level ±(0.15+0.002|t|)
B level ±(0.30+0.005|t|)
2B level ±(0.60+0.0010|t|)
21. Cheemi Technology Co., Ltd
Tel: 025-85996365 E-mail: info@cheemi-tech.com www. cheemi-tech.com
Ultra-micro Current Transformer
Introduction:
Current Transformer is also called instrument transformer, including current
transformer and voltage transformer.
It is used to proportionally convert high voltage or large current into standard voltage
(100V) or standard small current (5A or 1A, rated value), to realize the miniaturization
and standardization of the measuring instrument, equipment protection and automatic
control equipment.
Current transformer can also be used to separate the high voltage system to ensure the
safety of the personal and equipment.
Features:
● Small size
● High accuracy
● Good consistency.
● Used for current and power
measurement
Current Transformer
Case Type Model
Rated
Input
Current
Rated
Output
Current
Turns
Ratio
Phase Angle
Error
Linear Range
Mounting
(mm)
CMCT102 5A 2.5mA 2000:1
≤20'
(1A, 100Ω)
0~20A
(100Ω)
Ø5.0
CMCT103C 5A 5mA 1000:1
≤15'
(5A, 50Ω)
0~10A
(50Ω)
PCB
CEMCT131 5A 2.5mA 2000:1
≤20'
(1A, 100Ω)
0~20A
(100Ω)
PCB
CEMCT132 5A 5mA 1000:1
≤15'
(5A,50Ω)
0~15A(50Ω) PCB
CMCT118F 5A 5mA 1000:1
≤15'
(5A,50Ω)
0~30A
(50Ω)
PCB
CMCT118A 5A 2.5mA 2000:1
≤15'
(5A, 50Ω)
0~40A
(50Ω)
PCB
CMCT116A 5A 2mA 2500:1
≤20'
(1A,100Ω)
0~70A
(100Ω)
PCB
CMCT123A 5A 2.5mA 2000:1
≤60'
(10A,50Ω)
0~80A
(50Ω)
PCB
CMCT134 5A 2.5mA 2000:1
≤30'
(5A,50Ω)
0~40A
(50Ω)
PCB
CMCT350B 5A 5mA 1000:1
≤30'
(10A,100Ω)
0~10A
(100Ω)
PCB