AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. Canopus Instruments offers the highly capable AC Voltage and Current Transducers. Order your machine now! Visit: http://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/powerline-transducers-ac-voltage-current-converter-90-270vac-supply/

1. ISO 9001:2008
Certified
POWERLINE TRANSDUCERS
WITH IS0LATION
INPUT: AC VOLTAGE & AC CURRENT
Features
 Input : AC Current,
 AC Voltage
 Output : 0-10V/4-20mA
 Universal Power supply 90-
270VAC, 50Hz/60Hz or 100-
250VDC
 Low Noise & Low drift for
long term stability
 Response Time < 150mSec.
 2kV 3 Port Isolation.
 Performance guaranteed from
0-55°C.
 Dual isolated outputs
Note: Contact factory for other input
signal ranges.
POWERLINE TRANSDUCERS
INPUT : AC VOLTAGE & CURRENT - TYPE: SIM MINI 1.0
Overview
The SIM Mini 1.0 AC Voltage and AC Current Transducers find extensive use in monitoring
Powerline parameters. The SIM µ 2.0 Powerline Transducers interface with AC voltage (e.g.
0-100/300/500 V) & AC Current (CT signals: 0-1A, 0-5A) inputs to provide isolated 0-10V/4-
20mA DC output that is linearly proportional to the RMS value of the 50/60Hz AC input.
The Isolation between I/P & O/P (2KV) allows measurement in the presence of High Common
mode voltages at the input while ensuring safety of the measuring equipment.
The SIM Mini 1.0 modules operate from 90-270Vac power supply.
General Specifications
Isolation 2KV - 3 Port.
Power Supply 90-270VAC,50/60Hz,or 100-
250VDC
Power Consumption 6VA Approx
Enclosure
ABS Plastic,
35 mm DIN Rail Mounted.
IP40 Protection class.
Single Output W -55mm
H - 75mm
D - 110mm
Dual output W -100mm
H - 75mm
D - 110mm
Operating temp. range 0 – 55°C
Storage temp. range 0 – 80°C
Relative Humidity 0– 90% RH Non-Condensing
Max. Altitude 3000 mts above MSL
Technical Specifications
AC Input
Voltage Signal
(From PT)
Input Options:
0- 100VAC,0-300VAC,0-500VAC. Factory Set
AC Input
Current Signal
(From CT)
0-1A AC,0-5A AC,0-8A AC. Factory Set
C.T Burden <0.5VA
Input Impedance For Voltage 1M Ohm
DC Output Signal Output Options:
0- +5VDC, 0- +10VDC, 1-5VDC,
0-20mADC, 4-20mADC.
Factory Set
No of Outputs Two (Max)
Load Resistance For Output Voltage >1 k Ohm
For Output Current < 500 Ohm
Performance Accuracy ±0.5% of Span
Linearity 0.1%
Temperature Drift 0.01% / °C
Response Time < 150mSec
Calibration Zero & Span (Trimpot )
Applications
 AC/DC Drive systems
 PLC Systems
 Data Acquisition Systems

2. Address: #2 & 3, ‘Vishwas’, Karnik Road, Off. Murbad Road, Kalyan (W) 421 301, Maharashtra, INDIA.
Tel: +91-251-2322576 / 2203389 Telfax: +91-251- 2325849.
Email: marketing@canopusinstruments.com Website: www.canopusinstruments.com
Ordering Information:
Mechanical Details:
Single input & Single output Converter Single input & Dual output Converter
About Us
CANOPUS INSTRUMENTS is engaged in the development & manufacturing of industrial automation and process control
instrumentation products. The product areas cover mainly Analog Signal Conditioning Instruments for Process Automation,
Embedded Systems & Ultrasonic Equipment for Non-Destructive Testing Applications.
All the CANOPUS range of products are designed and manufactured with special care, to ensure trouble free
performance in Industrial applications where Electromagnetic Interference (EMI) & Harsh environmental conditions exist.
Today these products come to our customers with the quality assurance and tech-support in H/W & S/W, which has
evolved with our experience of over 25 years, to ensure uninterrupted operation in field conditions. This has enabled us to
successfully create an installed base of tens of thousands units performing satisfactorily in a wide spectrum of Critical Real time
Industrial applications all over India and in other parts of the world.
INNOVATION – QUALITY- RELIABILITY
PIN Details PIN Details
1 ~Input 11 -Output2
2 ~Input 12 NC
3 NC 13 NC
4 +Output1 14 NC
5 -Output1 15 Phase
6 NC 16 NC
7 NC 17 Neutral
8 NC 18 NC
9 NC 19 Earth
10 +Output2 20-38 NC
PIN Details PIN Details
1 NC 11 NC
2 NC 12 NC
3 NC 13 NC
4 ~Input 14 NC
5 NC 15 NC
6 ~Input 16 NC
7 NC 17 NC
8 Phase 18 NC
9 Neutral 19 - Output
10 Earth 20 +Output
Isolation
(I)
Input
Type
Output
Type
Supply
I/P Signal Range
O/P Signal
Range
Isolation
No of O/P
For Dual
I I/P O/P Supply X X 3P XX
I
Iac
Vac
Vdc
Idc
90-270VAC
OR
100-250VDC
FU
0-1A:01
0-5V:05
0-10V:10
4-20mA:42
0-20mA:20
3P
12I
0-5A:05
0-8A:08
0-100V:100
0-300V:300
0-500V:500
Note: 12I extension implies Single Input & Dual Isolated output.