A logic gate is a basic building block of digital circuits that performs a logical operation on one or more binary inputs (binary meaning a value of either 0 or 1) to produce a single binary output. There are several types of logic gates, each with its own specific function, but the most common ones are:
AND gate: This gate produces a 1 output only when all of its inputs are 1.
OR gate: This gate produces a 1 output when at least one of its inputs is 1.
NOT gate: This gate produces an output that is the opposite of its input.
XOR gate: This gate produces a 1 output when its inputs are different.
NAND gate: This gate produces a 0 output only when all of its inputs are 1.
NOR gate: This gate produces a 0 output when at least one of its inputs is 1.
Logic gates can be combined to form more complex circuits, which can perform arithmetic, store information, or control the behavior of a system.
This document discusses digital logic gates. It begins by defining a gate as a digital circuit with one or more inputs and one output. The three basic gates are described as the NOT, OR, and AND gates. Additional universal gates, the NAND and NOR gates, are introduced. Truth tables are provided to explain the output of each gate for all possible input combinations. The document also discusses how to derive different gate functions using NAND and NOR gates alone through De Morgan's theorems.
1. The document discusses combinational logic circuits and describes various types including half adders, full adders, decoders, encoders, multiplexers, and comparators.
2. It provides truth tables and logic expressions to define the functions of these circuits. Diagrams of logic gate implementations are also shown.
3. Examples of specific combinational circuits are analyzed in detail like a 4-bit magnitude comparator, priority encoders, decoders, and a BCD to decimal decoder. Their applications in digital systems are also mentioned.
Logic Gates & Related Device. This contains some basic fundamentals about Logic Gates. I hope, this will be helpful to those interested in Digital Electronics.
The document discusses basic and derived logic gates. It begins by introducing Boolean algebra and defining logic 0 and 1. It then explains the three basic logic gates - OR, AND, and NOT - through truth tables and circuit diagrams. The OR gate's output is 1 if any input is 1. The AND gate's output is 1 only if all inputs are 1. The NOT gate inverts the input. Complex logic circuits can be described algebraically using these basic gates and Boolean operations.
This document provides an overview of digital electronics and electronic principles. It covers topics such as number systems, binary codes, Boolean algebra, logic gates, and applications of digital circuits. Number systems and conversions between binary, decimal, octal, and hexadecimal are examined. Boolean algebra and logic gates like AND, OR, NOT, NAND, and NOR are described along with their truth tables. Combinational logic circuits including adders, multiplexers, and decoders are discussed. Sequential logic and memory elements like latches and flip-flops are also introduced. The document provides fundamental information on digital electronics and serves as an introduction to the key concepts and components in the field.
Computer Organization And Architecture lab manualNitesh Dubey
The document discusses the implementation of various logic gates and flip-flops. It describes half adders and full adders can be implemented using XOR and AND gates. Binary to gray code and gray to binary code conversions are also explained. Circuit diagrams for 3-8 line decoder, 4x1 and 8x1 multiplexer are provided along with their truth tables. Finally, the working of common flip-flops like SR, JK, D and T are explained through their excitation tables.
This document provides an introduction to programming programmable logic controllers (PLCs) using ladder diagrams, functional block diagrams, and statement list languages. It describes the basic techniques for developing ladder and function block programs representing logic functions like AND, OR, XOR, NAND and NOR. Specific topics covered include ladder diagram conventions, logic gates and truth tables, and latching circuits to hold an output energized even after the input ceases. Examples are provided of drawing ladder diagrams for logic functions and latching circuits to control devices like motors.
Logic gates are basic building blocks of digital circuits that control information flow and perform logical operations. The main logic gates are AND, OR, NOT, NAND, NOR, XOR, and XNOR. NAND and NOR gates are considered universal gates as they can be used to implement all other gate functions. Logic gates are represented by symbols and their operations defined by truth tables.
This document discusses digital logic gates. It begins by defining a gate as a digital circuit with one or more inputs and one output. The three basic gates are described as the NOT, OR, and AND gates. Additional universal gates, the NAND and NOR gates, are introduced. Truth tables are provided to explain the output of each gate for all possible input combinations. The document also discusses how to derive different gate functions using NAND and NOR gates alone through De Morgan's theorems.
1. The document discusses combinational logic circuits and describes various types including half adders, full adders, decoders, encoders, multiplexers, and comparators.
2. It provides truth tables and logic expressions to define the functions of these circuits. Diagrams of logic gate implementations are also shown.
3. Examples of specific combinational circuits are analyzed in detail like a 4-bit magnitude comparator, priority encoders, decoders, and a BCD to decimal decoder. Their applications in digital systems are also mentioned.
Logic Gates & Related Device. This contains some basic fundamentals about Logic Gates. I hope, this will be helpful to those interested in Digital Electronics.
The document discusses basic and derived logic gates. It begins by introducing Boolean algebra and defining logic 0 and 1. It then explains the three basic logic gates - OR, AND, and NOT - through truth tables and circuit diagrams. The OR gate's output is 1 if any input is 1. The AND gate's output is 1 only if all inputs are 1. The NOT gate inverts the input. Complex logic circuits can be described algebraically using these basic gates and Boolean operations.
This document provides an overview of digital electronics and electronic principles. It covers topics such as number systems, binary codes, Boolean algebra, logic gates, and applications of digital circuits. Number systems and conversions between binary, decimal, octal, and hexadecimal are examined. Boolean algebra and logic gates like AND, OR, NOT, NAND, and NOR are described along with their truth tables. Combinational logic circuits including adders, multiplexers, and decoders are discussed. Sequential logic and memory elements like latches and flip-flops are also introduced. The document provides fundamental information on digital electronics and serves as an introduction to the key concepts and components in the field.
Computer Organization And Architecture lab manualNitesh Dubey
The document discusses the implementation of various logic gates and flip-flops. It describes half adders and full adders can be implemented using XOR and AND gates. Binary to gray code and gray to binary code conversions are also explained. Circuit diagrams for 3-8 line decoder, 4x1 and 8x1 multiplexer are provided along with their truth tables. Finally, the working of common flip-flops like SR, JK, D and T are explained through their excitation tables.
This document provides an introduction to programming programmable logic controllers (PLCs) using ladder diagrams, functional block diagrams, and statement list languages. It describes the basic techniques for developing ladder and function block programs representing logic functions like AND, OR, XOR, NAND and NOR. Specific topics covered include ladder diagram conventions, logic gates and truth tables, and latching circuits to hold an output energized even after the input ceases. Examples are provided of drawing ladder diagrams for logic functions and latching circuits to control devices like motors.
Logic gates are basic building blocks of digital circuits that control information flow and perform logical operations. The main logic gates are AND, OR, NOT, NAND, NOR, XOR, and XNOR. NAND and NOR gates are considered universal gates as they can be used to implement all other gate functions. Logic gates are represented by symbols and their operations defined by truth tables.
This document provides information about logic gates. It discusses the history of logic gates and binary systems. It then defines common logic gates like OR, AND, NOT, NAND, and NOR gates. For each gate, it provides the symbolic representation, truth table, and examples of how the gate works. It also discusses applications of each gate type in contexts like industrial plants, microwave ovens, car safety systems, freezers, and home security systems. The document is authored by six group members and contains detailed information about the key concepts and components of logic gates.
Logic gates process true and false signals to perform logic functions. The key logic gates are NOT, AND, NAND, OR, NOR, EX-OR, and EX-NOR. Gates have standardized symbols and can be combined to create more complex logic functions. NAND and NOR gates are particularly useful because any other gate can be created by combining NAND or NOR gates.
This document discusses encoders and provides examples of 4-to-2 and 8-to-3 line encoders. It defines an encoder as a combinational circuit that performs the reverse operation of a decoder, with a maximum of 2n input lines and n output lines. Truth tables and logic circuits are given for 4-to-2 and 8-to-3 line encoders. Uses of encoders include converting decimal to binary numbers to perform binary operations like addition and subtraction in digital systems.
This document describes basic logic gates and their functions. It explains that an AND gate outputs 1 only when all inputs are 1, while an OR gate outputs 1 if any input is 1. A NOT gate inverts the input, and a NAND gate outputs 1 when any input is 0. A NOR gate only outputs 1 when all inputs are 0, and an XOR gate outputs 1 when the inputs are different.
The document discusses various types of logic gates. It describes AND, OR, NOT, NAND, NOR, XOR gates and provides their graphical symbols, algebraic functions, and truth tables. It also discusses half adders and full adders. A half adder produces sum and carry bits from two inputs. A full adder forms the arithmetic sum of three input bits to produce a sum and carry output.
1. A register transfer language describes the micro-operation transfers between registers in symbolic notation. It specifies the registers, micro-operations, and control that initiates the sequences.
2. A register is a group of flip-flops that store binary information. Common registers include the program counter, instruction register, and processor registers.
3. Information transfer between registers is represented symbolically, such as "R2 ← R1" denoting a transfer from register R1 to R2 under a control condition like P=1.
This document provides an overview of logic circuits and their components. It introduces basic logic gates like AND, OR, NAND, and NOR gates. It explains how these gates can be combined to build more complex logic circuits and discusses different types of logic circuits like bistables and flip-flops. It also covers integrated circuit logic devices and different scales of integration.
This document provides an overview of programming ONYX fire alarm systems, including:
- Type codes define how devices respond to activation and are categorized as alarm, supervisory, etc.
- Boolean logic uses AND, OR, and NOT gates to define relationships between input and output devices.
- Software equations written in the control panel define these relationships, such as "AND(Detector, PullStation)" to activate strobes.
- Control-by-event (CBE) is used to control specific outputs based on relevant inputs, like alarming only adjacent floors if a detector activates.
This document provides an overview of programming ONYX fire alarm systems, including:
- Type codes define how devices respond to activation and are categorized as alarm, supervisory, etc.
- Boolean logic uses AND, OR, and NOT gates to define relationships between input and output devices.
- Software equations written in the control panel define these relationships, such as "AND(Detector, PullStation)" to activate strobes.
- Control-by-event (CBE) is used to control specific outputs based on relevant inputs, like alarming only adjacent floors if a detector activates.
This document discusses analog control systems used with programmable logic controllers (PLCs) and programmable automation controllers (PACs). It describes how analog signals have continuous values between on and off, unlike discrete signals. It then explains that PLCs and PACs use analog input/output modules to interface with field devices that have continuously varying signals, such as temperature sensors, pressure sensors, motors etc. The document provides details on analog signal processing, including analog to digital conversion using ADCs and digital to analog conversion using DACs. It discusses key specifications for analog I/O modules such as resolution, conversion time and settling time.
The document discusses digital circuits including combinational and sequential circuits. It describes various combinational logic circuits such as half adders, full adders, comparators, multiplexers, encoders, decoders. It also discusses sequential circuits and how they employ memory elements. Arithmetic circuits, binary adders, subtractors, and BCD to 7-segment decoders are explained in detail through diagrams and examples.
Computer and network technology (CNT) lecture 03Susantha Herath
Lesson: Introduction to Logic Gates
This is the 3rd lecture of Computer and Network Technology subject of BCS HEQ certificate level examination. In this lecture we will learn about the building blocks of a computer processor called logic gates. You will learn about seven logic gates namely NOT, AND, OR, NOR, NAND, XOR, and XNOR gates.
Digital logic gates are the basic building blocks of digital circuits. The three main types of logic gates are AND gates, OR gates, and NOT gates. Logic gates have one or more inputs and one output, and the output depends on the combinations of inputs according to truth tables. Common logic gates include AND, OR, NAND, NOR, XOR, and XNOR gates. Logic gates can be combined to perform more complex logical operations and form the basis of digital electronics in computers and other devices.
Design & implementation of 3 bit flash adc in 0.18µm cmosIAEME Publication
This document describes the design and implementation of a 3-bit flash analog-to-digital converter (ADC) using a 0.18um CMOS technology. It includes 7 comparators and a thermometer-to-binary encoder. The ADC architecture consists of a resistive ladder, comparators that compare the input voltage to reference voltages from the ladder, and an encoder that converts the thermometer code from the comparators to a binary code. Simulation results show the ADC operates up to 4GHz and correctly converts the input signal to a 3-bit digital output. A layout is designed with common centroid layout for the comparators to reduce fabrication errors.
This document provides information about operational amplifiers including:
1. It describes the characteristics and components of an operational amplifier, including very high gain, very high input impedance, and very low output impedance.
2. It explains the closed-loop operation of an operational amplifier using negative feedback, and how this stabilizes the circuit and determines the gain based on resistor values.
3. It gives examples of applications including a summing amplifier circuit that adds multiple input voltages together to produce an output voltage equal to the summed input voltages but opposite in polarity.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
This document provides information about logic gates. It discusses the history of logic gates and binary systems. It then defines common logic gates like OR, AND, NOT, NAND, and NOR gates. For each gate, it provides the symbolic representation, truth table, and examples of how the gate works. It also discusses applications of each gate type in contexts like industrial plants, microwave ovens, car safety systems, freezers, and home security systems. The document is authored by six group members and contains detailed information about the key concepts and components of logic gates.
Logic gates process true and false signals to perform logic functions. The key logic gates are NOT, AND, NAND, OR, NOR, EX-OR, and EX-NOR. Gates have standardized symbols and can be combined to create more complex logic functions. NAND and NOR gates are particularly useful because any other gate can be created by combining NAND or NOR gates.
This document discusses encoders and provides examples of 4-to-2 and 8-to-3 line encoders. It defines an encoder as a combinational circuit that performs the reverse operation of a decoder, with a maximum of 2n input lines and n output lines. Truth tables and logic circuits are given for 4-to-2 and 8-to-3 line encoders. Uses of encoders include converting decimal to binary numbers to perform binary operations like addition and subtraction in digital systems.
This document describes basic logic gates and their functions. It explains that an AND gate outputs 1 only when all inputs are 1, while an OR gate outputs 1 if any input is 1. A NOT gate inverts the input, and a NAND gate outputs 1 when any input is 0. A NOR gate only outputs 1 when all inputs are 0, and an XOR gate outputs 1 when the inputs are different.
The document discusses various types of logic gates. It describes AND, OR, NOT, NAND, NOR, XOR gates and provides their graphical symbols, algebraic functions, and truth tables. It also discusses half adders and full adders. A half adder produces sum and carry bits from two inputs. A full adder forms the arithmetic sum of three input bits to produce a sum and carry output.
1. A register transfer language describes the micro-operation transfers between registers in symbolic notation. It specifies the registers, micro-operations, and control that initiates the sequences.
2. A register is a group of flip-flops that store binary information. Common registers include the program counter, instruction register, and processor registers.
3. Information transfer between registers is represented symbolically, such as "R2 ← R1" denoting a transfer from register R1 to R2 under a control condition like P=1.
This document provides an overview of logic circuits and their components. It introduces basic logic gates like AND, OR, NAND, and NOR gates. It explains how these gates can be combined to build more complex logic circuits and discusses different types of logic circuits like bistables and flip-flops. It also covers integrated circuit logic devices and different scales of integration.
This document provides an overview of programming ONYX fire alarm systems, including:
- Type codes define how devices respond to activation and are categorized as alarm, supervisory, etc.
- Boolean logic uses AND, OR, and NOT gates to define relationships between input and output devices.
- Software equations written in the control panel define these relationships, such as "AND(Detector, PullStation)" to activate strobes.
- Control-by-event (CBE) is used to control specific outputs based on relevant inputs, like alarming only adjacent floors if a detector activates.
This document provides an overview of programming ONYX fire alarm systems, including:
- Type codes define how devices respond to activation and are categorized as alarm, supervisory, etc.
- Boolean logic uses AND, OR, and NOT gates to define relationships between input and output devices.
- Software equations written in the control panel define these relationships, such as "AND(Detector, PullStation)" to activate strobes.
- Control-by-event (CBE) is used to control specific outputs based on relevant inputs, like alarming only adjacent floors if a detector activates.
This document discusses analog control systems used with programmable logic controllers (PLCs) and programmable automation controllers (PACs). It describes how analog signals have continuous values between on and off, unlike discrete signals. It then explains that PLCs and PACs use analog input/output modules to interface with field devices that have continuously varying signals, such as temperature sensors, pressure sensors, motors etc. The document provides details on analog signal processing, including analog to digital conversion using ADCs and digital to analog conversion using DACs. It discusses key specifications for analog I/O modules such as resolution, conversion time and settling time.
The document discusses digital circuits including combinational and sequential circuits. It describes various combinational logic circuits such as half adders, full adders, comparators, multiplexers, encoders, decoders. It also discusses sequential circuits and how they employ memory elements. Arithmetic circuits, binary adders, subtractors, and BCD to 7-segment decoders are explained in detail through diagrams and examples.
Computer and network technology (CNT) lecture 03Susantha Herath
Lesson: Introduction to Logic Gates
This is the 3rd lecture of Computer and Network Technology subject of BCS HEQ certificate level examination. In this lecture we will learn about the building blocks of a computer processor called logic gates. You will learn about seven logic gates namely NOT, AND, OR, NOR, NAND, XOR, and XNOR gates.
Digital logic gates are the basic building blocks of digital circuits. The three main types of logic gates are AND gates, OR gates, and NOT gates. Logic gates have one or more inputs and one output, and the output depends on the combinations of inputs according to truth tables. Common logic gates include AND, OR, NAND, NOR, XOR, and XNOR gates. Logic gates can be combined to perform more complex logical operations and form the basis of digital electronics in computers and other devices.
Design & implementation of 3 bit flash adc in 0.18µm cmosIAEME Publication
This document describes the design and implementation of a 3-bit flash analog-to-digital converter (ADC) using a 0.18um CMOS technology. It includes 7 comparators and a thermometer-to-binary encoder. The ADC architecture consists of a resistive ladder, comparators that compare the input voltage to reference voltages from the ladder, and an encoder that converts the thermometer code from the comparators to a binary code. Simulation results show the ADC operates up to 4GHz and correctly converts the input signal to a 3-bit digital output. A layout is designed with common centroid layout for the comparators to reduce fabrication errors.
This document provides information about operational amplifiers including:
1. It describes the characteristics and components of an operational amplifier, including very high gain, very high input impedance, and very low output impedance.
2. It explains the closed-loop operation of an operational amplifier using negative feedback, and how this stabilizes the circuit and determines the gain based on resistor values.
3. It gives examples of applications including a summing amplifier circuit that adds multiple input voltages together to produce an output voltage equal to the summed input voltages but opposite in polarity.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
2. Introduction
Logic symbols used to represent logic gates are
in accordance with ANSI / IEEE standard 91-
1984
This standard has been adopted by private
industry and the military for use in internal
documentation as well as published literature
Because integrated circuit (ICs) are used in all
applications, the logic function of a device is
generally of greater importance to the technician
or technologist than the details of the component
level circuit operation within the IC package
3. The Inverter
The inverter (NOT circuit) performs the
operation called inversion or
complementation
The inverter changes one logic level to the
opposite level
Standard logic symbols for the inverter are
shown in Figure 3-1. Part(a) shows the
distinctive shape symbols, and part(b)
shows the rectangular outline symbols
4.
5. The Negation Indicators
The negation indicator is a “bubble” (o) that indicates
inversion or complementation when it appears on the
input or output of any logic element, as shown in Figure
3-1(a) for the inverter
Generally, inputs are on the left of a logic symbol and the
output is on the right
When appearing on the input, the bubble means that a 0
is the active or asserted input state, and the input is
called an active-LOW input
When appearing on the output, the bubble means that a
0 is the active or asserted output state, and the output is
called an active-LOW output
6. The Polarity Indicators
The polarity or level indicator is a “triangle”
( ) that indicates inversion when it
appears on the input or output of a logic
element, as shown in Figure 3-1(b)
7. Inverter Truth Table
When a HIGH level is applied to an inverter
input, a LOW level will appear on its output
When a LOW level is applied to its input, a HIGH
will appear on its output
This operation is summarized in Table 3-1,
which shows the output for each possible input
in terms of levels and corresponding bits
A table such as this is called a truth table
8.
9. Inverter Operation
Figure 3-2 shows the output of an inverter
for a pulse input, where t1 and t2 indicate
the corresponding points on the input and
output pulse waveforms
When the input is LOW, the output is
HIGH; when the input is HIGH, the output
is LOW, thereby producing an inverted
output pulse
10. Timing Diagrams
The time relationship of the output pulse to
the input pulse in Figure 3-2 can be shown
with a simple timing diagram by aligning
the two pulses so that the occurrences of
the pulse edges appear in the proper time
relationship
Timing diagrams are specially useful for
illustrating the time relationship of digital
waveforms with multiple pulses
11. Logic Expression for an Inverter
The operation of an inverter (NOT circuit) can be
expressed as follows: If the input variable is
called A and the output variable is called X, then
The complement of a variable is designed by a
bar over the letter
This expression states that the output is the
complement of the input, so if A = 0, then X = 1,
and if A = 1, then X = 0
12. Figure 3-6 illustrates this
The complemented variable A can be read
as “A bar” or “not A”
13. Application Example
Figure 3-7 shows a circuit for producing
the 1’s complement of an 8-bit binary
numbers
The bits of the binary number are applied
to the inverter inputs and the 1’s
complement of the number appears on the
outputs
14.
15. The AND Gate
The AND gate is one of the basic gates
that can be combined to form any logic
function
The term gate is used to describe a circuit
that performs a basic logic operation
The AND gate is composed of two or more
inputs and a single output, as indicated by
the standard logic symbols shown in
Figure 3-8
16.
17. Operation of an AND Gate
An AND gate produces a HIGH output only
when all of the inputs are HIGH
When any of the inputs is LOW, the output is
LOW
Therefore, the basic purpose of an AND gate is
to determine when certain conditions are
simultaneously true
The inputs of the 2-input AND gate in Figure 3-8
are labeled A and B, and the output is labeled X
For a 2-input AND gate, output X is HIGH if
inputs A and B are HIGH; X is LOW if either A or
B is LOW, or it both A and B are LOW
18. Figure 3-9 illustrates a 2-input AND gate
with all four possibilities of input
combinations and the resulting output for
each
19. AND Gate Truth Table
The logical operation of a gate can be
expressed with a truth table that lists all input
combinations with the corresponding outputs, as
illustrated in Table 3-2 for a 2-input AND gate
The truth table can be expanded to any number
of inputs
For any AND gate, regardless of the number of
inputs, the output is HIGH only when all inputs
are HIGH
20.
21. The total number of possible combinations of
binary inputs to a gate is determined by the
following formula:
where N is the number of possible input
combinations and n is the number of input
variables. To illustrate,
For two input variables: N = 22 = 4 combinations
For three input variables: N = 23 = 8 combinations
For four input variables: N = 24 = 16 combinations
22. Pulse Operation
In most applications, the inputs to a gate
are not stationary levels but are voltage
waveforms that change frequently
between HIGH and LOW logic levels
Let’s examine the pulsed operation of an
AND gate by looking at the inputs with
respect to each other in order to determine
the output level at any given time shown in
Figure 3-10
23. In Figure 3-10, the inputs are both HIGH (1)
during the time interval, t1, making the output
HIGH (1) during this interval
During time interval t2, input A is LOW (0) and
input B is HIGH (1), so the output is LOW (0)
During time interval t3, both inputs are HIGH (1)
again, and therefore the output is HIGH (1)
During time interval t4, input A is HIGH (1) and
input B is LOW (0), resulting in a LOW (0) output
Finally, during time interval t5, input A is LOW
(0), input B is LOW (0), and the output is
therefore LOW (0)
24.
25. Logic Expressions for an AND Gate
The logical AND function of two variables is represented
mathematically either by placing a dot between the two
variables, as A · B, or by simply writing the adjacent
letters without the dot, as AB
Boolean multiplication follows the same basic rules
governing binary multiplication
26. The operation of a 2-input AND gate can
be expressed in equation form as follows:
If one input variable is A, the other input
variable is B, and the output variable is X,
then the Boolean expression is
27. Figure 3-14(a) shows the gate with the
input and output variables indicated
To extend the AND expression to more
than two input variables, simply use a new
letter for each input variable
Parts (b) and (c) of Figure 3-14 show AND
gates with three and four input variables,
respectively
28.
29. You can evaluate an AND gate operation
by using the Boolean expressions for the
output
For example, each variable on the inputs
can be either a 1 or a 0; so for the 2-input
AND gate, make substitutions in the
equation for the output, X = AB, as shown
in Table 3-4
30.
31. Application Examples
A common application of the AND gate is to
enable (that is, to allow) the passage of a signal
(pulse waveform) from one point to another at
certain times and to inhibit (prevent) the
passage at other times
A simple example of this particular use of an
AND gate is shown in Figure 3-15 where the
AND gate controls the passage of a signal
(waveform A) to a digital counter
The purpose of this circuit is to measure the
frequency of waveform A
32.
33. The enable pulse has a width of precisely 1s.
When the enable pulse is HIGH, waveform A
passes through the gate to the counter, and
when the enable pulse is LOW, the signal is
prevented from passing through (inhibited)
During the 1 second (1s) interval of the enable
pulse, a certain number of pulses in waveform A
pass through the AND gate to the counter
The number of pulses passing through during
the 1s interval is equal to the frequency of
waveform A
34. For example, Figure 3-15 shows six
pulses in one second, which is a
frequency of 6Hz
If 1000 pulses pass through the gate in the
1s interval of the enable pulse, there are
1000 pulses/s, or a frequency of 1000Hz
35. A Seat Belt Alarm System
In Figure 3-16, an AND gate is used in a simple
automobile seat belt alarm system to detect when the
ignition switch is on and the seat belt is unbuckled
If the ignition switch is on, a HIGH is produced on input A
of the AND gate
If the seat belt is not properly buckled, a HIGH is
produced on input B of the AND gate
Also, when the ignition switch is turned on, a timer is
started that produces a HIGH on input C for 30s
If all three conditions exist – that is, if the ignitions is on
and the seat belt is unbuckled and the timer is running –
the output of the AND gate is HIGH, and an audible
alarm is energized to remind the driver
36.
37.
38. The OR Gate
The OR gate is another of the basic gates
from which all logic functions are
constructed
An OR gate has two or more inputs and
one output, as illustrated by the standard
logic symbols in Figure 3-17, where OR
gates with two inputs are illustrated
39.
40. Operation of an OR Gate
An OR gate produces a HIGH on the output
when any of the inputs is HIGH
The output is LOW only when all of the inputs
are LOW
An OR gate determines when one or more of its
inputs are HIGH and produces a HIGH on its
output to indicate this condition
The inputs of the 2-input OR gate in Figure 3-17
are labeled A and B, and the output is labeled X
For a 2-input OR gate, output X is HIGH if either
input A or input B is HIGH, or if both A and B are
HIGH; X is LOW if both A and B are LOW
41. Figure 3-18 illustrates the equation for a 2-
input OR gate for all four possible input
combinations
42. OR Gate Truth Table
The operation of a 2-input OR gate is
described in Table 3-5
This truth table can be expanded for any
number of inputs; but regardless of the
number of inputs, the output is HIGH when
one or more of the inputs are HIGH
43.
44. Pulsed Operation
In Figure 3-19, inputs A and B are both HIGH (1)
during time interval t1, making the output HIGH
(1)
During time interval t2, input A is LOW (0), but
because input B is HIGH (1), the output is HIGH
(1)
Both inputs are LOW (0) during time interval t3,
so there is a LOW (0) output during this time
During time interval t4, the output is HIGH (1)
because input A is HIGH (1)
45. In this illustration, we have simply applied
the truth table operation of the OR gate to
each of the time intervals during which the
levels are nonchanging
46. Logic Expression for an OR Gate
The logical OR function of two variables is
represented mathematically by a + between the
two variables, for example, A + B
The basic rules for Boolean addition are as
follows:
Boolean addition is the same as the OR function
47. Notice that Boolean addition differs from
binary addition in the case where two 1s
are added. There is no carry in Boolean
addition
The operation of a 2-input OR gate can be
expressed as follows: If one input variable
is A, if the other input variable is B, and if
the output variable is X, then the Boolean
expression is
48. Figure 3-23(a) shows the gate logic
symbol with input and output variables
labeled
To extend the OR expression to more than
two input variables, a new letter is used for
each additional variable
Parts(b) and (c) of Figure 3-23 show OR
gates with three and four input variables,
respectively
49.
50. OR gate operation can be evaluated by
using the Boolean expressions for the
output X by substituting all possible
combinations of 1 and 0 values for the
input variables, as shown in Table 3-6 for
a 2-input OR gate
51.
52. Application Example
A simplified portion of an intrusion detection and alarm
system is shown in Figure 3-24
This system could be used for one room in a home – a
room with two windows and a door
The sensors are magnetic switches that produce a HIGH
output when open and a LOW output when closed
As long as the windows and the door are secured, the
switches are closed and all three of the OR gate inputs
are LOW
When one of the windows or the door is opened, a HIGH
is produced on that input to the OR gate and the gate
output goes HIGH. It then activates and latches an alarm
circuit to warn of the intrusion
53.
54.
55. The NAND Gate
The NAND gate is a popular logic element
because it can be used as a universal gate; that
is NAND gates can be used in combination to
perform the AND, OR, and inverter operations
The term NAND is a contraction of NOT-AND
and implies an AND function with a
complemented (inverted) output
The standard logic symbol for a 2-input NAND
gate and its equivalency to an AND gate
followed by an inverter are shown in Figure 3-
25(a)
56.
57. Operation of a NAND Gate
A NAND gate produces a LOW output only when
all the inputs are HIGH
When any of the inputs is LOW, the output will
be HIGH
For the specific case of a 2-input NAND gate, as
shown in Figure 3-25 with the input labeled A
and B and the output labeled X, the operation
can be stated as follows:
For a 2-input NAND gate, output X is LOW if
input A and B are HIGH; X is HIGH if either A or
B is LOW, or if both A and B are LOW
58. Note that this operation is opposite that of the
AND in terms of the output level
In a NAND gate, the LOW level (0) is the active
or asserted output level, as indicated by the
bubble on the output
Figure 3-26 illustrates the operation of a 2-input
NAND gate for all four input combinations, and
Table 3-7 is the truth table summarizing the
logical operation of the 2-input NAND gate
59.
60.
61. Negative-OR Equivalent Operation
of a NAND Gate
Inherent in a NAND gate’s operation is the fact
that one or more LOW inputs produce a HIGH
output
From this viewpoint, a NAND gate can be used
for an OR operation that requires one or more
LOW inputs to produce a HIGH output
This aspect of NAND operation is referred to as
negative-OR
The term negative in this context means that the
inputs are defined to be in the active or asserted
state when LOW
62. For a 2-input NAND gate performing a negative-
OR operation, output X is HIGH if either input A
or input B is LOW, or if both A and B are LOW
When a NAND gate is used to detect one or
more LOWs on its inputs rather than all HIGHs,
it is performing the negative-OR operation and is
represented by the standard logic symbol shown
in Figure 3-29
63. Logic Expression for a NAND Gate
The Boolean expression for the output of a 2-input
NAND gate is
This expression says that the two input variables, A and
B, are first ANDed and then complemented, as indicated
by the bar over the AND expression
This is description in equation form of the operation of a
NAND gate with two inputs
Evaluating this expression for all possible values of the
two input variables, you get the results shown in Table 3-
8
64.
65. The NOR Gate
The NOR gate, like the NAND gate, is a useful
logic element because it can also be used as a
universal gate; that is, NOR gates can be used
in combination to perform the AND, OR, and
inverter operations
The term NOR is a contraction of NOT-OR and
implies an OR function with an inverted
(complemented) output
The standard logic symbol for 2-input NOR gate
and its equivalent OR gate followed by an
inverter are shown in Figure 3-33
66.
67. Operation of a NOR Gate
A NOR gate produces a LOW output when any
of its inputs is HIGH
Only when all of its inputs are LOW is the output
HIGH
For the specific case of a 2-input NOR gate, as
shown in Figure 3-33 with the inputs labeled A
and B and the output labeled X, the operation
can be stated as follows:
For a 2-input NOR gate, output X is LOW if
either input A or input B is HIGH, or if both A and
B are HIGH; X is HIGH if both A and B are LOW
68. In a NOR gate, the LOW output is the
active or asserted output level as indicated
by the bubble on the output
Figure 3-34 illustrates the operation of a 2-
input NOR gate for all four possible input
combinations, and Table 3-9 is the truth
table for a 2-input NOR gate
69.
70. Negative-AND Equivalent
Operation of the NOR Gate
A NOR gate, like the NAND, has another aspect
of its operation that is inherent in the way it
logically functions
From this viewpoint, a NOR gate can be used for
an AND operation that requires all LOW inputs
to produce a HIGH output
This aspect of NOR operation is called negative-
AND
The term negative in this context means that the
inputs are defined to be in the active or asserted
state when LOW
71. For a 2-input NOR gate performing a
negative-AND operation, output X is HIGH
if both inputs A and B are LOW
When a NOR gate is used to detect all
LOWs on its inputs rather than one or
more HIGHs, it is performing the negative-
AND operation and is represented by the
standard symbol in Figure 3-37
72. Logic Expression for a NOR Gate
The Boolean expression for the output of a 2-
input NOR gate can be written as
This equation says that the two input variables
are first ORed and then complemented, as
indicated by the bar over the OR operation
Evaluating this expression, you get the results
shown in Table 3-10
73.
74. The Exclusive-OR Gate
Standard symbols for an exclusive-OR
(XOR for short) gate are shown in Figure
3-41
The XOR gate has only two inputs
75. The output of an exclusive-OR gate is HIGH only
when the two inputs are at opposite logic levels
This operation can be stated as follows with
reference to inputs A and B and output X:
For an exclusive-OR gate is HIGH, or if input A
is HIGH and input B is LOW; X is LOW if A and
B are both HIGH or both LOW
76. The four possible input combinations and
the resulting outputs for an XOR gate are
illustrated in Figure 3-42
The operation of an XOR gate is
summarized in the truth table shown in
Table 3-11
77.
78.
79. The Exclusive-NOR Gate
Standard symbols for an exclusive-NOR (XNOR) gate
ate shown in Figure 3-44
Like the XOR gate, an XNOR has only two inputs
The bubble on the output of the XNOR symbol indicates
that its output is opposite that of the XOR gate
When the two input logic levels are opposite, the output
of the exclusive-NOR gate is LOW
The operation can be stated as follows (A and B are
inputs, X is output):
For an exclusive-NOR gate, output X is LOW if input A is
LOW and input B is HIGH, or it A is HIGH and B is LOW;
X is HIGH if A and B are both HIGH or both LOW
80.
81. The four possible input combinations and
the resulting outputs for an XNOR gate are
shown in Figure 3-45
The operation of an XNOR gate is
summarized in Table 3-12
Notice that the output is HIGH when the
same level is on both inputs
82.
83.
84. Pulsed Operation
Let’s examine the operation of XOR and XNOR gates
under pulsed input conditions
We apply the truth table operation during each distinct
time interval of the pulsed inputs, as illustrated in Figure
3-46 for an XOR gate
You can see that the input waveforms A and B are at
opposite levels during time intervals t2 and t4. Therefore,
the output X is HIGH during these two times
Since both inputs are at the same level, either both
HIGH or both LOW, during time intervals t1 and t3, the
output is LOW during those times as shown in the timing
diagram
85.
86. Application Example
An exclusive-OR gate can be used as a two-bit
adder
An examination of the truth table for an XOR
gate will show you that its output is the binary
sum of the two input bits
In the case where the inputs are both 1s, the
output is sum 0, but you lose the carry of 1
Figure 3-48 illustrates an XOR gate used as a
basic adder
87.
88. Reference
The content of this lecture presentation was
complied from the following reference text
Digital Fundamentals 8th edition
FLOYD
Prentice Hall