Ceramic foam filter
•
0 likes•268 views
Qingdao Boffin-Toda Advanced Ceramics Co., Ltd is a Chinese company that specializes in manufacturing and selling ceramic foam filters for foundries. They allocate profits to research and development to improve production technologies and develop new product lines. Their main products include silicon carbide, alumina, and zirconia ceramic foam filters in various sizes and shapes that can filter molten iron, non-ferrous metals, and steel alloys at high temperatures. They also produce mullite-based honeycomb ceramic filters and ceramic pouring cups for foundries.
Report
Share
Report
Share
Download to read offline
Recommended
Metal Foaming of Aluminium Alloys
This document summarizes the production and properties of aluminum foam. It discusses two main production methods - direct foaming of molten aluminum alloy by gas injection and foaming of solid precursors containing blowing agents. Direct foaming is already commercially used while precursor foaming offers control over foam structure. The document also outlines fundamental research needs on foam stability and structure-property relationships. Key properties of aluminum foam discussed are its low density, high stiffness, energy absorption, and strength-to-weight ratio making it suitable for lightweight construction.
Foundry Lectures
This document provides information about the Foundry Engineering course taught by Dr. Ather Ibrahim. It lists recommended textbooks and covers topics like traditional manufacturing processes, casting processes, casting methods, solidification, fluidity, and factors that affect metal flow in molds. The key concepts covered are the casting process, types of foundries and castings, advantages and limitations of casting, and how properties of molten metal and the mold material impact solidification and fluidity.
Introduction to Steel Coating Technologies_BCDeCooman_2016
Coating technologies provide sheet steel with superior corrosion resistance at low cost without impacting recyclability. Widespread use in manufacturing is due to a switch from uncoated to coated sheet in automotive and building industries. Coatings include metallic and organic types applied via hot or cold rolling and provide favorable application characteristics like excellent adhesion and formability.
Why Centrifugal Cast FeSi Anodes are Better than Die Cast or Sand Cast Anodes
Centrifugal casting produces stronger, more corrosion-resistant anodes compared to die cast or sand cast anodes. Centrifugal casting spins molten metal at high speeds onto a mold, creating a dense, homogenous structure without imperfections from gates or cores. This uniform cooling and dense structure makes centrifugally cast anodes physically stronger, less prone to breaking during installation or corroding during operation, and able to pass more stringent quality tests. Overall, centrifugally cast anodes have improved performance and reduced lifetime costs compared to other casting methods.
Recycling of iron & steel
Iron and steel constitute over 90% of all metal production and a similar fraction of the scrap metals market. Steel mills consume about three quarters of the scrap, and iron and steel foundries consume the remainder to produce ferrous castings.
Economic Facts of Iron & Steel Recycling
•Almost 40% of the world’s steel production is made from scrap.
•Every ton of recycled steel can help saving 1.4 ton of iron ore.
•Conversely, a steel can land-filled will take 100 years to vanish.
•Steel is the most recycled material on earth! In Luxembourg, 2,292 tons of steel packaging have been collected in 2013.
•Recycling one tonne of steel saves 1,100 kg of iron ore, 630 kg of coal, and 55 kg of limestone.
•CO2 emissions are reduced by 58% through the use of ferrous scrap.
•Recycling one tonne of steel saves 642 kWh of energy, 1.8 barrels (287 litres) of oil, 10.9 million Btu's of energy and 2.3 cubic metres of landfill space.
•Recycling steel uses 75% less energy compared to creating steel from raw materials - enough to power 18 million homes.
•Steel recycling uses 74% less energy, 90% less virgin materials and 40% less water; it also produces 76% fewer water pollutants, 86% fewer air pollutants and 97% less mining waste.
•Steel automobile frames contain at least 25% recycled steel and a typical electrical appliance will usually be made of 75% recycled steel. Steel cans consist of at least 25% recycled steel.
Ferrous iron and steel scrap
Explaining the Types & Details of the Ferrous Iron & Steel SCRAP widely traded across the world today.
Casting Process
Sand casting, investment casting, and die casting were discussed as the main casting methods. Key topics included mold filling and solidification, phase change and shrinkage during solidification, heat transfer considerations, and pattern design guidelines. Variations such as continuous casting and 3D printing of tooling were also mentioned. Environmental issues associated with casting operations like energy usage, emissions, and waste disposal were reviewed.
03 specification hot dip galvanising
This document provides specifications for hot dip zinc galvanization of steel. It outlines the general requirements including applicable codes, quality of zinc, surface preparation, and galvanizing process. It also specifies coating requirements such as the minimum mass of zinc coating for different steel thicknesses and types, as well as requirements for uniformity and freedom from defects. Testing methods are described for visual inspection, adhesion, uniformity, and mass of zinc coating. Criteria for conforming lots and scales of sampling are also provided.
Recommended
Metal Foaming of Aluminium Alloys
This document summarizes the production and properties of aluminum foam. It discusses two main production methods - direct foaming of molten aluminum alloy by gas injection and foaming of solid precursors containing blowing agents. Direct foaming is already commercially used while precursor foaming offers control over foam structure. The document also outlines fundamental research needs on foam stability and structure-property relationships. Key properties of aluminum foam discussed are its low density, high stiffness, energy absorption, and strength-to-weight ratio making it suitable for lightweight construction.
Foundry Lectures
This document provides information about the Foundry Engineering course taught by Dr. Ather Ibrahim. It lists recommended textbooks and covers topics like traditional manufacturing processes, casting processes, casting methods, solidification, fluidity, and factors that affect metal flow in molds. The key concepts covered are the casting process, types of foundries and castings, advantages and limitations of casting, and how properties of molten metal and the mold material impact solidification and fluidity.
Introduction to Steel Coating Technologies_BCDeCooman_2016
Coating technologies provide sheet steel with superior corrosion resistance at low cost without impacting recyclability. Widespread use in manufacturing is due to a switch from uncoated to coated sheet in automotive and building industries. Coatings include metallic and organic types applied via hot or cold rolling and provide favorable application characteristics like excellent adhesion and formability.
Why Centrifugal Cast FeSi Anodes are Better than Die Cast or Sand Cast Anodes
Centrifugal casting produces stronger, more corrosion-resistant anodes compared to die cast or sand cast anodes. Centrifugal casting spins molten metal at high speeds onto a mold, creating a dense, homogenous structure without imperfections from gates or cores. This uniform cooling and dense structure makes centrifugally cast anodes physically stronger, less prone to breaking during installation or corroding during operation, and able to pass more stringent quality tests. Overall, centrifugally cast anodes have improved performance and reduced lifetime costs compared to other casting methods.
Recycling of iron & steel
Iron and steel constitute over 90% of all metal production and a similar fraction of the scrap metals market. Steel mills consume about three quarters of the scrap, and iron and steel foundries consume the remainder to produce ferrous castings.
Economic Facts of Iron & Steel Recycling
•Almost 40% of the world’s steel production is made from scrap.
•Every ton of recycled steel can help saving 1.4 ton of iron ore.
•Conversely, a steel can land-filled will take 100 years to vanish.
•Steel is the most recycled material on earth! In Luxembourg, 2,292 tons of steel packaging have been collected in 2013.
•Recycling one tonne of steel saves 1,100 kg of iron ore, 630 kg of coal, and 55 kg of limestone.
•CO2 emissions are reduced by 58% through the use of ferrous scrap.
•Recycling one tonne of steel saves 642 kWh of energy, 1.8 barrels (287 litres) of oil, 10.9 million Btu's of energy and 2.3 cubic metres of landfill space.
•Recycling steel uses 75% less energy compared to creating steel from raw materials - enough to power 18 million homes.
•Steel recycling uses 74% less energy, 90% less virgin materials and 40% less water; it also produces 76% fewer water pollutants, 86% fewer air pollutants and 97% less mining waste.
•Steel automobile frames contain at least 25% recycled steel and a typical electrical appliance will usually be made of 75% recycled steel. Steel cans consist of at least 25% recycled steel.
Ferrous iron and steel scrap
Explaining the Types & Details of the Ferrous Iron & Steel SCRAP widely traded across the world today.
Casting Process
Sand casting, investment casting, and die casting were discussed as the main casting methods. Key topics included mold filling and solidification, phase change and shrinkage during solidification, heat transfer considerations, and pattern design guidelines. Variations such as continuous casting and 3D printing of tooling were also mentioned. Environmental issues associated with casting operations like energy usage, emissions, and waste disposal were reviewed.
03 specification hot dip galvanising
This document provides specifications for hot dip zinc galvanization of steel. It outlines the general requirements including applicable codes, quality of zinc, surface preparation, and galvanizing process. It also specifies coating requirements such as the minimum mass of zinc coating for different steel thicknesses and types, as well as requirements for uniformity and freedom from defects. Testing methods are described for visual inspection, adhesion, uniformity, and mass of zinc coating. Criteria for conforming lots and scales of sampling are also provided.
Stainless Steel
The document discusses different types of stainless steel, including their compositions and properties. It begins with an overview of crystallography and allotropes, explaining that iron and steel are crystalline and can exist in different forms. It then covers the four main types of stainless steel: ferritic, austenitic, martensitic, and duplex. For each type, the document describes their typical compositions in terms of chromium, nickel, and other elements, as well as their properties such as corrosion resistance, strength, and magnetic permeability.
Insertos consumables rovbon
This document discusses consumable inserts used in welding critical piping systems. The consumable inserts become an integral part of the initial root weld bead, ensuring complete penetration and a smooth transition between the insert and pipe ends. This reduces flow restrictions and eliminates cracking caused by notches or changes in cross-sectional weld area. The document provides information on product types, dimensions, specifications, materials, and quality control for the consumable inserts.
Dynocast CFF Zirconia Catalogue
This document discusses Dynocast, an Indian company that manufactures ceramic foam filters. It produces zirconia, silicon carbide, alumina, and zircon foam filters that can be used for filtering metals like steel, cast iron, and aluminum. The document provides technical specifications for zirconia foam filters and explains their benefits, like high filtration efficiency and mechanical strength. Using ceramic foam filters can reduce rejection rates during metal casting and improve properties of finished castings.
Foam by alia
This document discusses metallic foams, including their production methods, stages of formation, characteristics, and applications. There are several methods for producing metallic foams, including gas injection into melts and particle decomposition. Foam formation occurs in stages of nucleation, growth, and collapse. Metallic foams are lightweight porous materials made from metals like aluminum and titanium. They have properties like energy absorption, heat transfer, acoustic insulation, and strength at low density. Potential applications include automotive parts, heat exchangers, medical implants, and acoustic damping.
Oxide dispersion strengthened stainless steel seminar
This document discusses oxide dispersion strengthened austenitic stainless steel. It begins with an introduction to stainless steels and austenitic stainless steels. It then explains how oxide dispersion strengthening works and the process used to produce these steels. Comparisons are made between the properties of oxide dispersion strengthened steels and non-oxide dispersion strengthened steels. The document also discusses the microstructure, applications, advantages, disadvantages and concludes with references.
Surface finishing processes - Electroplating
The presentation takes into account widely used surface finishing processes including electroplating, anodizing, alodining, cadmium plating, zinc plating, phosphating, passivation
Vesuvius Project report - Monolithic refractories
This document provides information about monolithic refractories produced at Vesuvius India Ltd. It discusses the advantages of monolithic refractories over precast refractories. It also categorizes and describes different types of monolithic refractories like low cement castables, conventional castables, ultra low cement castables and no cement castables. Furthermore, it lists the raw materials used and their properties, including various aluminas, alumino silicates, silica based materials, zircon sand and insulating materials. The document aims to give an overview of the manufacturing and applications of monolithic refractories.
Porous materials and metallic foams
This document reviews the deformation processes of porous metals and metallic foams. It discusses that porous metals have large pore volumes, while metallic foams refer to porous metals created through foaming processes. Forming porous metals into shapes allows for control of porosity and morphology, work hardening of the metal matrix, and creation of unusual microstructures. Forming can also improve properties like strength and sound absorption. Porous metals are also able to take on more complicated shapes than solid metals. Overall, forming processes can enhance properties but also reduce porosity, and porous metals may have applications where solid metals cannot be used.
"Stainless Steel"
Stainless steel is an alloy of iron, chromium, and sometimes nickel that is known for its corrosion resistance and strength. It requires a minimum of 10.5-11% chromium content to give it good corrosion resistance through the formation of a passive chromium oxide layer. There are several types of stainless steel including austenitic, ferritic, martensitic, duplex, and precipitation hardening grades, each with different microstructures and properties. Stainless steel finds wide application in industries such as medical, chemical processing, marine, and automotive due to its corrosion resistance.
Manufacturing & Applications of Stainless Steels
All stainless steels contain chromium, with the chromium content exceeding 11% and being present as a solute rather than bonded with other elements. Stainless steel originated about 100 years ago with martensitic types, and advances in steelmaking technology now allow for high-chromium, low-carbon steels to be produced. The main stainless steel types are martensitic, ferritic, and austenitic stainless steels, which differ in their chemical compositions and properties.
Continuous casting of steel
This is the presentation on Continuous casting of steel, types and defects along with electromagnetic stirrer.
Casting vs Forging
This document provides an overview of casting and forging processes. Casting involves heating metal to a molten state and pouring it into a mold to create a desired shape. Forging uses thermal and mechanical energy to change the shape of steel billets or ingots while in a solid state. The document discusses the casting process, including manufacturing molds, and the forging process, including impression die forging and cold forging. Both casting and forging have advantages - casting allows for large sizes and complicated shapes while forging produces stronger, more durable parts.
Steel Making Continuous casting I
Continuous casting is a steelmaking process where liquid steel is solidified into a semi-finished billet, bloom, or slab. In this process, liquid steel flows from a ladle into a water-cooled copper mold. As the steel exits the mold, it begins to solidify on the surface while the core remains liquid. The semi-solid steel strand is then cooled further through water sprays to fully solidify it into the desired cross-section. The continuous casting process allows for higher productivity and quality than traditional ingot casting.
Automotive Anodizing
The document summarizes automotive specifications for aluminum anodizing from various standards organizations. It outlines the general requirements for General Motors, Ford, DaimlerChrysler, Japanese, German, and European standards. All require various testing such as adhesion, thickness, and corrosion resistance testing. It also provides information on documentation required for the Production Part Approval Process (PPAP) such as process studies, control plans, and measurement analysis.
Inclusion formation afs
The document discusses clean steels and the challenges in producing them. It defines clean steels as those with a low frequency of inclusions on average less than 5 microns in diameter. Producing clean steel requires controlling inclusion generation, transporting inclusions to interfaces where they can separate from the steel, and removing inclusions from interfaces. Success depends on understanding and executing these steps during steelmaking, refining, casting, and processing. The major problems are incomplete separation of clustered inclusions and the presence of sporadic larger inclusions due to slag emulsification or refractory materials.
Investigation on the Rate of Solidification and Mould Heating in the Casting ...
Abstract: The quality of casting in the foundry can be measured by the rate at which solidification of the
molten metal takes place, which is consequent upon the rate the mould, is able to dissipate the heat of
solidification to the surroundings. The faster or slower the heat removal process during solidification the
structure of the grains formed by the casting is either finer of coarser. An experimental investigation was
carried out to compare the rate of solidification of commercially pure aluminium in metallic moulds. The rate at
which solidification occurred was compared with the rate at which the mould absorbed and dissipates heat. The
experiments conducted recorded the temperature fields at different casting location and that of the moulds
respectively. The results showed that there is a direct relation of the rate of heat absorption by the mould and
the rate of solidification in metallic moulds.
Keywords – Aluminium, casting, heat, mould, solidification, temperature.
Corrosion various concepts and reasons of corrosion and measures
This document discusses corrosion resistant materials used in pharmaceutical equipment fabrication. It notes that Title 21 CFR regulations require equipment surfaces contacting drugs to not react or absorb in a way that alters safety. Austenitic stainless steels and higher alloys like nickel are generally used for applications requiring high corrosion resistance. Welding must meet ASME and customer specifications. Over time, highly corrosion resistant materials like alloy 316L stainless steel and nickel alloys have replaced standard stainless steel due to better resistance to chemistry and heat treatment issues. Electro-polishing stainless steel improves corrosion resistance and cleanability. Fluoropolymers like Teflon are highlighted as the most functional modern construction material due to their chemical inertness and non-wetting properties
Advanced casting and welding
Casting is a manufacturing process where liquid material is poured into a mold and allowed to solidify. The solidified part is known as a casting. Investment casting, also known as lost-wax casting, involves creating a wax pattern, coating it with refractory material to create a ceramic mold, melting away the wax to leave a cavity, and pouring molten metal into the mold cavity. This allows for very intricate parts to be cast with close tolerances and smooth finishes. Investment casting is commonly used for parts that are difficult to machine from difficult to machine alloys like aluminum, copper, and steels.
Hot and cold rolled steel
The document discusses hot rolled steel and cold rolled steel production processes. Hot rolled steel involves rolling above 1700 degrees Fahrenheit, resulting in a blue-gray finish and malleability. Common hot rolled steel products include I-beams, sheets, bars, and rails. Cold rolled steel uses lower temperatures close to room temperature, producing a smoother gray finish and more precise dimensions than hot rolled steel. Common cold rolled steel products include bars, strips, and rods. Both processes produce steel for uses like automotive, construction, appliances, and more.
Van gang dẻo hitachi
Within 18 months of completion or 12 months of use, Hitachi Valve will repair or replace defective products free of charge if the failure is due to design or manufacturing issues. Exceptions include improper use, damage from foreign objects, unauthorized repairs, natural disasters, or other causes beyond Hitachi Valve's control. Malleable iron is suitable for valves due to its high yield point to tensile strength ratio, stable properties over a wide temperature range, and good castability and machinability. Graphite gaskets and packing provide maintenance-free sealing for valves.
Copper Mould
SINOM GROUP CO., LTD. is one of the largest manufacturer of copper mould tube in China. Based on customers requirement, we design, manufacture and install the square copper mould tube, round copper mould tube, beam blank, rectangular copper mould tube, diamond type, non-standard type etc.
High pressure die casting
- Metal die casting involves filling molten metal into a mold under high pressure, giving castings superior metallurgical properties, high rigidity, and strength over sand castings. This process can be used to cast aluminum, zinc, and alloy metals in sizes ranging from ounces to over 100 pounds.
- The automotive industry is the largest market for aluminum castings, with cast products making up over 50% of the aluminum in cars. High pressure die casting is used to produce aluminum die castings and components from high quality alloys.
- Two new technical reports are proposed to promote quality and efficiency in the die casting field by classifying casting defects and detailing mechanical properties of aluminum foundry alloys.
More Related Content
What's hot
Stainless Steel
The document discusses different types of stainless steel, including their compositions and properties. It begins with an overview of crystallography and allotropes, explaining that iron and steel are crystalline and can exist in different forms. It then covers the four main types of stainless steel: ferritic, austenitic, martensitic, and duplex. For each type, the document describes their typical compositions in terms of chromium, nickel, and other elements, as well as their properties such as corrosion resistance, strength, and magnetic permeability.
Insertos consumables rovbon
This document discusses consumable inserts used in welding critical piping systems. The consumable inserts become an integral part of the initial root weld bead, ensuring complete penetration and a smooth transition between the insert and pipe ends. This reduces flow restrictions and eliminates cracking caused by notches or changes in cross-sectional weld area. The document provides information on product types, dimensions, specifications, materials, and quality control for the consumable inserts.
Dynocast CFF Zirconia Catalogue
This document discusses Dynocast, an Indian company that manufactures ceramic foam filters. It produces zirconia, silicon carbide, alumina, and zircon foam filters that can be used for filtering metals like steel, cast iron, and aluminum. The document provides technical specifications for zirconia foam filters and explains their benefits, like high filtration efficiency and mechanical strength. Using ceramic foam filters can reduce rejection rates during metal casting and improve properties of finished castings.
Foam by alia
This document discusses metallic foams, including their production methods, stages of formation, characteristics, and applications. There are several methods for producing metallic foams, including gas injection into melts and particle decomposition. Foam formation occurs in stages of nucleation, growth, and collapse. Metallic foams are lightweight porous materials made from metals like aluminum and titanium. They have properties like energy absorption, heat transfer, acoustic insulation, and strength at low density. Potential applications include automotive parts, heat exchangers, medical implants, and acoustic damping.
Oxide dispersion strengthened stainless steel seminar
This document discusses oxide dispersion strengthened austenitic stainless steel. It begins with an introduction to stainless steels and austenitic stainless steels. It then explains how oxide dispersion strengthening works and the process used to produce these steels. Comparisons are made between the properties of oxide dispersion strengthened steels and non-oxide dispersion strengthened steels. The document also discusses the microstructure, applications, advantages, disadvantages and concludes with references.
Surface finishing processes - Electroplating
The presentation takes into account widely used surface finishing processes including electroplating, anodizing, alodining, cadmium plating, zinc plating, phosphating, passivation
Vesuvius Project report - Monolithic refractories
This document provides information about monolithic refractories produced at Vesuvius India Ltd. It discusses the advantages of monolithic refractories over precast refractories. It also categorizes and describes different types of monolithic refractories like low cement castables, conventional castables, ultra low cement castables and no cement castables. Furthermore, it lists the raw materials used and their properties, including various aluminas, alumino silicates, silica based materials, zircon sand and insulating materials. The document aims to give an overview of the manufacturing and applications of monolithic refractories.
Porous materials and metallic foams
This document reviews the deformation processes of porous metals and metallic foams. It discusses that porous metals have large pore volumes, while metallic foams refer to porous metals created through foaming processes. Forming porous metals into shapes allows for control of porosity and morphology, work hardening of the metal matrix, and creation of unusual microstructures. Forming can also improve properties like strength and sound absorption. Porous metals are also able to take on more complicated shapes than solid metals. Overall, forming processes can enhance properties but also reduce porosity, and porous metals may have applications where solid metals cannot be used.
"Stainless Steel"
Stainless steel is an alloy of iron, chromium, and sometimes nickel that is known for its corrosion resistance and strength. It requires a minimum of 10.5-11% chromium content to give it good corrosion resistance through the formation of a passive chromium oxide layer. There are several types of stainless steel including austenitic, ferritic, martensitic, duplex, and precipitation hardening grades, each with different microstructures and properties. Stainless steel finds wide application in industries such as medical, chemical processing, marine, and automotive due to its corrosion resistance.
Manufacturing & Applications of Stainless Steels
All stainless steels contain chromium, with the chromium content exceeding 11% and being present as a solute rather than bonded with other elements. Stainless steel originated about 100 years ago with martensitic types, and advances in steelmaking technology now allow for high-chromium, low-carbon steels to be produced. The main stainless steel types are martensitic, ferritic, and austenitic stainless steels, which differ in their chemical compositions and properties.
Continuous casting of steel
This is the presentation on Continuous casting of steel, types and defects along with electromagnetic stirrer.
Casting vs Forging
This document provides an overview of casting and forging processes. Casting involves heating metal to a molten state and pouring it into a mold to create a desired shape. Forging uses thermal and mechanical energy to change the shape of steel billets or ingots while in a solid state. The document discusses the casting process, including manufacturing molds, and the forging process, including impression die forging and cold forging. Both casting and forging have advantages - casting allows for large sizes and complicated shapes while forging produces stronger, more durable parts.
Steel Making Continuous casting I
Continuous casting is a steelmaking process where liquid steel is solidified into a semi-finished billet, bloom, or slab. In this process, liquid steel flows from a ladle into a water-cooled copper mold. As the steel exits the mold, it begins to solidify on the surface while the core remains liquid. The semi-solid steel strand is then cooled further through water sprays to fully solidify it into the desired cross-section. The continuous casting process allows for higher productivity and quality than traditional ingot casting.
Automotive Anodizing
The document summarizes automotive specifications for aluminum anodizing from various standards organizations. It outlines the general requirements for General Motors, Ford, DaimlerChrysler, Japanese, German, and European standards. All require various testing such as adhesion, thickness, and corrosion resistance testing. It also provides information on documentation required for the Production Part Approval Process (PPAP) such as process studies, control plans, and measurement analysis.
Inclusion formation afs
The document discusses clean steels and the challenges in producing them. It defines clean steels as those with a low frequency of inclusions on average less than 5 microns in diameter. Producing clean steel requires controlling inclusion generation, transporting inclusions to interfaces where they can separate from the steel, and removing inclusions from interfaces. Success depends on understanding and executing these steps during steelmaking, refining, casting, and processing. The major problems are incomplete separation of clustered inclusions and the presence of sporadic larger inclusions due to slag emulsification or refractory materials.
Investigation on the Rate of Solidification and Mould Heating in the Casting ...
Abstract: The quality of casting in the foundry can be measured by the rate at which solidification of the
molten metal takes place, which is consequent upon the rate the mould, is able to dissipate the heat of
solidification to the surroundings. The faster or slower the heat removal process during solidification the
structure of the grains formed by the casting is either finer of coarser. An experimental investigation was
carried out to compare the rate of solidification of commercially pure aluminium in metallic moulds. The rate at
which solidification occurred was compared with the rate at which the mould absorbed and dissipates heat. The
experiments conducted recorded the temperature fields at different casting location and that of the moulds
respectively. The results showed that there is a direct relation of the rate of heat absorption by the mould and
the rate of solidification in metallic moulds.
Keywords – Aluminium, casting, heat, mould, solidification, temperature.
Corrosion various concepts and reasons of corrosion and measures
This document discusses corrosion resistant materials used in pharmaceutical equipment fabrication. It notes that Title 21 CFR regulations require equipment surfaces contacting drugs to not react or absorb in a way that alters safety. Austenitic stainless steels and higher alloys like nickel are generally used for applications requiring high corrosion resistance. Welding must meet ASME and customer specifications. Over time, highly corrosion resistant materials like alloy 316L stainless steel and nickel alloys have replaced standard stainless steel due to better resistance to chemistry and heat treatment issues. Electro-polishing stainless steel improves corrosion resistance and cleanability. Fluoropolymers like Teflon are highlighted as the most functional modern construction material due to their chemical inertness and non-wetting properties
Advanced casting and welding
Casting is a manufacturing process where liquid material is poured into a mold and allowed to solidify. The solidified part is known as a casting. Investment casting, also known as lost-wax casting, involves creating a wax pattern, coating it with refractory material to create a ceramic mold, melting away the wax to leave a cavity, and pouring molten metal into the mold cavity. This allows for very intricate parts to be cast with close tolerances and smooth finishes. Investment casting is commonly used for parts that are difficult to machine from difficult to machine alloys like aluminum, copper, and steels.
Hot and cold rolled steel
The document discusses hot rolled steel and cold rolled steel production processes. Hot rolled steel involves rolling above 1700 degrees Fahrenheit, resulting in a blue-gray finish and malleability. Common hot rolled steel products include I-beams, sheets, bars, and rails. Cold rolled steel uses lower temperatures close to room temperature, producing a smoother gray finish and more precise dimensions than hot rolled steel. Common cold rolled steel products include bars, strips, and rods. Both processes produce steel for uses like automotive, construction, appliances, and more.
Van gang dẻo hitachi
Within 18 months of completion or 12 months of use, Hitachi Valve will repair or replace defective products free of charge if the failure is due to design or manufacturing issues. Exceptions include improper use, damage from foreign objects, unauthorized repairs, natural disasters, or other causes beyond Hitachi Valve's control. Malleable iron is suitable for valves due to its high yield point to tensile strength ratio, stable properties over a wide temperature range, and good castability and machinability. Graphite gaskets and packing provide maintenance-free sealing for valves.
What's hot (20)
Oxide dispersion strengthened stainless steel seminar
Oxide dispersion strengthened stainless steel seminar
Investigation on the Rate of Solidification and Mould Heating in the Casting ...
Investigation on the Rate of Solidification and Mould Heating in the Casting ...
Corrosion various concepts and reasons of corrosion and measures
Corrosion various concepts and reasons of corrosion and measures
Similar to Ceramic foam filter
Copper Mould
SINOM GROUP CO., LTD. is one of the largest manufacturer of copper mould tube in China. Based on customers requirement, we design, manufacture and install the square copper mould tube, round copper mould tube, beam blank, rectangular copper mould tube, diamond type, non-standard type etc.
High pressure die casting
- Metal die casting involves filling molten metal into a mold under high pressure, giving castings superior metallurgical properties, high rigidity, and strength over sand castings. This process can be used to cast aluminum, zinc, and alloy metals in sizes ranging from ounces to over 100 pounds.
- The automotive industry is the largest market for aluminum castings, with cast products making up over 50% of the aluminum in cars. High pressure die casting is used to produce aluminum die castings and components from high quality alloys.
- Two new technical reports are proposed to promote quality and efficiency in the die casting field by classifying casting defects and detailing mechanical properties of aluminum foundry alloys.
Scl Ppt
Satinder Chemicals SCL is a reliable import and export company dealing in chemicals and industrial products for over two decades. It provides a wide range of high quality products and customized solutions to its customers. The document lists and describes various industrial products and materials that SCL imports and exports, including refractory materials, ferroalloys, saw blades, grits, electrodes, and fume extraction systems.
DXD钢材手册.pdf
Shandong Dingxinda Company is a leading Chinese manufacturer of galvanized and color coated metals with annual production capacities of over 6 million tons. The company produces a wide variety of coated steel products including galvanized steel pipe, plate, and color coated plate to international standards. Dingxinda is committed to developing high-quality, high-end brand products and solutions for domestic and international markets.
The properties and benefits of spray formed steels
This presentation is about spray formed steels, which are superior materials compared to conventionally produced high-alloyed, high grade steels.
Cr alloy steel shot & bearing steel grit ( duoleng)
This document provides information about a company that produces Cr alloy steel shot and bearing angular steel grit. It discusses the company's production processes, quality control measures, product applications, and customer references. The company uses centrifugation and special heat treatments to produce spherical Cr alloy steel shot and angular bearing steel grit that is fully rounded, homogeneous, high in density and hardness, and has excellent wear resistance. Both products are suitable for surface cleaning, peening and descaling applications. The company has over 50 international customers and supplies 90% of the domestic granite market with its bearing grit.
List of Raw Materials
View or download Europerf's List of Raw Materials, including mild steel, commercial steel, drawing steel, and forming steel
Raw materials and coatings - basic training
For construction professionals and sales personnel.
The material will take you through the basics of raw materials and coatings as well as describes how to use them in different applications. After studying the material you will:
* Know the basics of raw materials and coatings
* Know the newest products in coatings
* Get introduced to how different coatings and steel grades are used in construction applications
* Know some technical performance of the coatings
* Get a deeper overview of the two newest coating options
* Get some important tips maintenance-wise
Read more about steel coatings:
ruukki.com/colourcoatedsteels
ruukki.com/metalcoatedsteels
Marketing Strategy for a Steel Manufacturing Company
Welsh Consultants publishes its White Paper outlining what could be an actionable Marketing Strategy for a Steel Manufacturing Compan
STUDIES ON ALUMINIUM-SILICON EUTECTIC ALLOY CASTING AND DESIGN APPROACH OF IT...
LM-6 alloy, an eutectic alloy of Aluminium and Silicon is widely used in automobile industries and aircraft industries due to its high strength to weight ratio, high wear resistance, corrosion resistance etc. In this project work, to improve the mechanical properties of LM-6 alloy such as tensile strength, hardness and percentage elongation, modification treatment is carried out along with grain refinement, fluxing and degassing. Modification is a treatment of metal in molten condition which leads to the formation of fine grain structure improves the mechanical properties of the metal.
Case study for material selection (Automobile Silencer)
This document discusses material selection for automobile silencers and catalytic converters. It provides details on the manufacturing process, technical aspects, and criteria for selecting materials for silencers. Common materials used include steel, stainless steel, cast iron, and alloys for their mechanical properties, corrosion resistance, and ability to withstand high exhaust temperatures. The document also discusses the material requirements and alternatives for catalytic converters, focusing on a ferrite alloy and stainless steel sheet that is pre-oxidized to provide a surface for catalyst adhesion.
Bearing Steel Grit & Cr Alloy Steel Shot( DUOLENG) 2015
This document provides information about a company that produces bearing steel grit and chromium alloy steel shot. It discusses the company's history, certifications, production processes, quality control procedures, applications, and customer references. Contact information is also provided. The key points are that the company has been producing these abrasive materials since 1988, uses unique production methods, and their products have been used successfully in a variety of industries by over 50 countries.
Metallurgy metal finishing
This document contains summaries of various metallurgy and metal finishing projects that could be started as small businesses. It describes projects involving silver plating, diesel engine cylinder blocks, gold plating metallic frames, hard chromium plating, alloy steel casting, soldering wire, galvanized steel wire, pressure die casting, mild steel ingots, heat treatment services, spheroidal graphite iron castings, mild steel welding electrodes, phosphor bronze bearing sleeves, aluminum castings, sintered bush, and casting for auto locks.
13. engg materials
This document discusses various engineering materials including their properties and applications. It covers ferrous materials like cast iron, wrought iron and steel. It also discusses non-ferrous materials such as copper, aluminum and their alloys. Other engineering materials discussed include ceramics and glass. The key mechanical properties of materials like strength, elasticity, plasticity, ductility, fatigue, hardness and creep are explained. Various types of cast iron such as gray cast iron, white cast iron and malleable cast iron along with their properties and applications are described in detail.
Shah Mayur.
Bombay Metal Corporation is an ISO 9001:2008 certified company that represents world-known metal suppliers in India. It is a one-stop shop for ferrous and non-ferrous metals that can supply products as per technical requirements and on demand. The company offers competitive pricing and global supply capabilities for specialty metals like ETP copper, aluminum, and phosphor bronze. It stocks and trades various metals including copper, brass, aluminum, stainless steel, wear resistance steel, and high tensile steel.
Shah Mayur.
Bombay Metal Corporation is an ISO 9001:2008 certified company that represents world-known metal suppliers in India. It is a one-stop shop for ferrous and non-ferrous metals that can supply products as per technical requirements and on demand. The company offers competitive pricing and global supply capabilities for specialty metals like ETP copper, aluminum, and phosphor bronze. It stocks and trades various metals including copper, brass, aluminum, stainless steel, wear resistance steel, and high tensile steel.
Steel Making and Rolling (Metalworking): Process & Applications, Rod and Bar...
The steel industry has taken note of the continued growth in steel imports and a number of projects have been planned and are under implementation.In rolling mills, intermediate steel products are given their final shape and dimension in a series of shaping and finishing operations. Rolling of steel is one of the most important manufacturing processes for steel. It is usually the first step in the processing of steel after it is made and cast either in Ingot or continuous cast product in a steel melting shop.
See more
http://goo.gl/lUUh86
http://goo.gl/fSIHG7
http://goo.gl/4os7IE
http://www.entrepreneurindia.co/
Tags
Business guidance for steel rolling industry, Business Plan for a Startup Business, Business plan for steel rolling mill, Business start-up, Fusion welding processes, Great Opportunity for Startup, Hot rolled steel properties, Hot rolling mill process, Hot Rolling Mill, Hot Rolling mill, Hot Strip Mill, How is Steel Produced, How to Start a Steel Production Business, How to start a successful steel rolling business, How to start steel mill industry, How to Start Steel rolling Industry in India, How to start steel rolling mill, Indian Steel Industry, Industrial steel rolling mill, Modern steel making technology, Most Profitable Steel Business Ideas, New small scale ideas in Steel rolling industry, Opportunity Steel Rolling Mill, Plate Mill, Process & Applications, Process of steelmaking, Profitable small and cottage scale industries, Progress and Prospect of Rolling Technology, Project for startups, Rod and Bar Rolling, Rod and bar rolling, Rolling Metalworking, Rolling Mill for Steel Bars, Rolling process, Setting up and opening your steel rolling Business, Small scale Commercial steel rolling business, Small Scale Steel rolling Projects, Small Start-up Business Project, Start a Rolling Mill Industry, Start steel rolling mill in India, Starting a Steel Business, Starting a Steel rolling Business, Starting Steel Mini Mill, Start-up Business Plan for steel rolling, Startup Project for steel rolling business, Steel and hot rolling Business, Steel Based Profitable Projects, Steel Based Small Scale Industries Projects, Steel business plan, Steel hot rolling process, Steel Industry in India, Steel making and rolling, Steel making Projects, Steel making technology, Steel Making, Steel manufacturing process, Steel mill process, Steel mill, Steel production process, Steel rerolling mill feasibility start up, Steel rolling Industry in India, Steel rolling machine factory, Steel rolling mill industry demand, Steel rolling mill industry overview, Steel rolling mill industry, Steel rolling mill market forecast, Steel rolling mill market growth, Steel rolling mill market, Steel rolling mill size, Steel rolling mill starts production, Steel rolling mill, Steel Rolling Technology, Steelmaking, Steelmaking Processes, Types of rolling mills
Bhartia Group Brochure
This document provides an overview of Bhartia Group, an Indian conglomerate operating in various industries. It details the group's core businesses which include manufacturing additives for foundries, cement, packaged drinking water, coke, HDPE bags, medical gases, mining, trading, retail, farming, and real estate development. The group aims to meet evolving societal and market expectations through diversification and has offices across India and internationally. It primarily manufactures products that support foundry operations such as additives, coatings, inoculants, and ferro alloys.
Report of Pakistan Steel Mill
Steel mills, also known as steelworks, are industrial factories that specialize in the production of steel. They typically smelt down iron and carbon, mixing the two together in a specific ratio to create steel.
Seminar on JIndal Training
Jindal Saw Ltd produces large diameter steel pipes using various manufacturing processes. It produces ductile iron spun pipes (DISP) using centrifugal casting, induction furnaces, magnesium treatment, and annealing. The pipes undergo various tests and treatments like hydrostatic testing, cement lining, curing, zinc coating, and bituminous coating. Pipes are checked for quality before being dispatched. Jindal emphasizes preventative and breakdown maintenance to maintain plant equipment and machinery.
Similar to Ceramic foam filter (20)
The properties and benefits of spray formed steels
The properties and benefits of spray formed steels
Cr alloy steel shot & bearing steel grit ( duoleng)
Cr alloy steel shot & bearing steel grit ( duoleng)
Marketing Strategy for a Steel Manufacturing Company
Marketing Strategy for a Steel Manufacturing Company
STUDIES ON ALUMINIUM-SILICON EUTECTIC ALLOY CASTING AND DESIGN APPROACH OF IT...
STUDIES ON ALUMINIUM-SILICON EUTECTIC ALLOY CASTING AND DESIGN APPROACH OF IT...
Case study for material selection (Automobile Silencer)
Case study for material selection (Automobile Silencer)
Bearing Steel Grit & Cr Alloy Steel Shot( DUOLENG) 2015
Bearing Steel Grit & Cr Alloy Steel Shot( DUOLENG) 2015
Steel Making and Rolling (Metalworking): Process & Applications, Rod and Bar...
Steel Making and Rolling (Metalworking): Process & Applications, Rod and Bar...
Recently uploaded
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...
The Strategy Implementation System offers a structured approach to translating stakeholder needs into actionable strategies using high-level and low-level scorecards. It involves stakeholder analysis, strategy decomposition, adoption of strategic frameworks like Balanced Scorecard or OKR, and alignment of goals, initiatives, and KPIs.
Key Components:
- Stakeholder Analysis
- Strategy Decomposition
- Adoption of Business Frameworks
- Goal Setting
- Initiatives and Action Plans
- KPIs and Performance Metrics
- Learning and Adaptation
- Alignment and Cascading of Scorecards
Benefits:
- Systematic strategy formulation and execution.
- Framework flexibility and automation.
- Enhanced alignment and strategic focus across the organization.
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
How MJ Global Leads the Packaging Industry.pdf
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Structural Design Process: Step-by-Step Guide for Buildings
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Recently uploaded (20)
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Structural Design Process: Step-by-Step Guide for Buildings
Structural Design Process: Step-by-Step Guide for Buildings
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdf
Ceramic foam filter
- 1. Who We Are Qingdao Boffin-Toda Advanced Ceramics Co., Ltd., developing business since 2007. We are specialized in manufacture and sale of ceramic foam filters, used in the foundry industry. Manufacture of other refractory is the complementary production to foam filters. A high ratio of created profit is allocated to development of production technologies and production environment, investment into R&D focused on development of the existing product lines and creation of the new products, cooperation with specialized universities and research institutes. Above are the core priorities of our company. Our company has passed the ISO9001:2008 certification, Typical products are as follows: silicon carbide ceramic foam filter, alumina ceramic foam filter, zirconia ceramic foam filter and other refractory which is also used for foundry industry. Our Products Ceramic Foam Filter Filtration of Iron(CFF-S) CFF-S is a range of new generation silicon carbide based ceramic foam filters with a consistent, high level performance in terms of metal flow rate and filtration efficiency. CFF-S filters are intended for filtering grey, ductile iron and nonferrous metals at the temperatures up to 1480 °C. The filters can be placed in the gating system of the mould as well as in combination with exothermic extensions for direct casting. They can also be used for continuous nonferrous metal filtering, e.g. casting of copper bars in CONTIROD or SCR TECHNOLOGY. CFF-S are available in many standard and custom sizes, shapes, and pore sizes. Filtration of Non-ferrous Alloys(CFF-A) CFF-A is alumina based ceramic foam filter which are used for temperatures up to a limit of 1100℃. CFF-A is most suited for the filtration of aluminum, aluminum alloys and other nonferrous for foundry and metallurgical applications. The filters can easily be placed into filtration boxes, holding furnaces, filtering cups, etc. CFF-A are available in many standard and custom sizes, shapes, and pore sizes. Filtration of Steel Alloys(CFF-Z) CFF-Z based on partially stabilized zirconia withstand temperatures up to 1700℃. CFF-Z is used in the filtration of steel grades from carbon to stainless and super alloys. There are many benefits to the steel foundry including fewer reoxidation and subsurface defects and a higher casting yield. CFF-Z is highly thermal shock resistant, a must for the steel foundry. CFF-Z are available in many standard and custom sizes, shapes, and pore sizes.
- 2. Other Refractory Honeycomb ceramic filter(HCF-M) HCF-M is mullite based ceramic material withstand temperatures up to 1500℃. They have a uniform lattice structure, good thermal shock resistance, higher specific surface area, low-pressure drop. For the features above, HCF-M is not only suited for the filtration of grey, ductile iron and nonferrous metals but also for the heat storage bed and catalyst carrier. Ceramic Pouring Cup (CPC) CPC is used for investment casting technology, They are mullite based ceramic material and molding at high pressure. They are fit for casting ferrous as well as nonferrous metals, withstand the most extreme conditions within superalloys casting. Fiber Mesh Filter(MF) MF are produced by heat resistance fiber in special technique and after-treatment. With features of lower cost, convenient using, no impact on element of metal casting, heat resistance, flame resistance, MF is an ideal filtration materials for various molten metal. MF can be used in sand casting, gravity and low pressure die casting. There are three kinds of MF can be used in different applications. Details are as follows: Specification Working Temperature Mesh Size Application Range MF-1 ≤850℃ 1.5x1.5 Nonferrous Metals MF-2 ≤1450℃ 1.5x1.5 2.0x2.0 2.5x2.5 Iron Casting MF-3 ≤1560℃ 2.0x2.0 2.5x2.5 Steel Casting Downloads Contact Us Northern Industrial Park, Chengyang, Qingdao, Shandong, China Boffin-Toda Advanced Ceramics Co., Ltd. Zibo Representative Office Phone: +86 533-6723934 +86 532-82713788 Fax: +86 532-87691287 Website: www.boffin-toda.com