Centralized decentralized discrete control systems
•Download as PPTX, PDF•
3 likes•1,795 views
A distributed control system (DCS) is a decentralized and customizable system with a hierarchy of controllers connected by communication channels. It is designed with redundancy to control critical processes. DCS systems are more expensive than PLC or SCADA systems but maintain a constant stream of data for high-speed machine control of continuous industrial processes.
Report
Share
Report
Share
Recommended
Scada Classification By-Rahul Mehra
This Presentation is about SCADA System, in this ppt classification of SCADA System is included briefly.
Micro grid
The document discusses security issues and solutions for microgrids. It begins with introducing smart grids and the advantages they provide. It then explains the need for microgrids as smaller-scale local power networks. The document outlines the common architecture of microgrids and discusses how information and communication technologies enable smart functions but also create vulnerabilities. It examines specific security issues like denial of service attacks, encryption needs, and replay attacks. The document concludes that smart grids provide benefits but cybersecurity must continually be improved to address vulnerabilities.
Wide Area Monitoring System WAMS & Applications
Wide area monitoring systems (WAMS) are essentially based on the new data acquisition technology of phasor measurement and allow monitoring transmission system conditions over large areas in view of detecting and further counteracting grid instabilities.
Smart Grid Domains and Zones
The document discusses smart grid domains and zones. It defines smart grid as an electricity network that uses digital communications to detect and react to local usage changes. The smart grid is described as having several domains including generation, transmission, distribution and consumer. Within each domain are zones such as field, station and operations that facilitate information flow. The smart grid aims to allow generators of all sizes, empower consumers and reduce environmental impact through innovative monitoring and control technologies.
Distribution System Automation
Distribution Automation: Control functions– Communication system –Consumer Information Service– Geographical Information Systems. SCADA –block diagram –functions. Energy Management: Supply Side Management–Demand Side Management–Technologies Implementation, Dispersed Generation
Hardware in loop simulation
The document discusses hardware-in-the-loop (HIL) simulation.
(1) HIL simulation is a technique used in control system development that adds a real electronic control unit (ECU) component to a real-time simulation.
(2) HIL simulation is used because directly connecting an ECU to a real plant for testing is not always possible due to time and complexity constraints in plant fabrication and controller design.
(3) The HIL simulation procedure involves first simulating a model and PID controller software-only, then configuring the PID controller hardware-only, and finally testing the hardware PID controller on the simulated process using HIL simulation with both software and hardware.
QoS in WSN thesis
This document is a project report submitted by four students for their Bachelor of Engineering degree. It examines quality of service improvement in wireless sensor networks. Specifically, it studies cluster-based routing protocols like LEACH and proposes modifications to LEACH called MODLEACH that introduces efficient cluster head replacement and dual transmitting power levels. Thresholding techniques are also incorporated into MODLEACH to further boost performance based on metrics like throughput, network lifetime and cluster head formations. The report analyzes and compares the performance of LEACH, MODLEACH, MODLEACH with hard thresholds and MODLEACH with soft thresholds through simulation and implementation in Qualnet and Matlab.
Architecture and security in Vanet PPT
This document discusses Vehicular Ad-Hoc Networks (VANETs) which allow vehicles to communicate with each other to share safety and traffic information. It outlines the architecture of VANETs including vehicle-to-vehicle and vehicle-to-infrastructure communication. The document also discusses security issues in VANETs such as bogus information attacks, identity disclosure, and denial-of-service attacks. It proposes the use of authentication, message integrity, privacy, traceability and availability to address these security requirements. The document assumes that roadways are divided into regions managed by trusted roadside infrastructure units.
Recommended
Scada Classification By-Rahul Mehra
This Presentation is about SCADA System, in this ppt classification of SCADA System is included briefly.
Micro grid
The document discusses security issues and solutions for microgrids. It begins with introducing smart grids and the advantages they provide. It then explains the need for microgrids as smaller-scale local power networks. The document outlines the common architecture of microgrids and discusses how information and communication technologies enable smart functions but also create vulnerabilities. It examines specific security issues like denial of service attacks, encryption needs, and replay attacks. The document concludes that smart grids provide benefits but cybersecurity must continually be improved to address vulnerabilities.
Wide Area Monitoring System WAMS & Applications
Wide area monitoring systems (WAMS) are essentially based on the new data acquisition technology of phasor measurement and allow monitoring transmission system conditions over large areas in view of detecting and further counteracting grid instabilities.
Smart Grid Domains and Zones
The document discusses smart grid domains and zones. It defines smart grid as an electricity network that uses digital communications to detect and react to local usage changes. The smart grid is described as having several domains including generation, transmission, distribution and consumer. Within each domain are zones such as field, station and operations that facilitate information flow. The smart grid aims to allow generators of all sizes, empower consumers and reduce environmental impact through innovative monitoring and control technologies.
Distribution System Automation
Distribution Automation: Control functions– Communication system –Consumer Information Service– Geographical Information Systems. SCADA –block diagram –functions. Energy Management: Supply Side Management–Demand Side Management–Technologies Implementation, Dispersed Generation
Hardware in loop simulation
The document discusses hardware-in-the-loop (HIL) simulation.
(1) HIL simulation is a technique used in control system development that adds a real electronic control unit (ECU) component to a real-time simulation.
(2) HIL simulation is used because directly connecting an ECU to a real plant for testing is not always possible due to time and complexity constraints in plant fabrication and controller design.
(3) The HIL simulation procedure involves first simulating a model and PID controller software-only, then configuring the PID controller hardware-only, and finally testing the hardware PID controller on the simulated process using HIL simulation with both software and hardware.
QoS in WSN thesis
This document is a project report submitted by four students for their Bachelor of Engineering degree. It examines quality of service improvement in wireless sensor networks. Specifically, it studies cluster-based routing protocols like LEACH and proposes modifications to LEACH called MODLEACH that introduces efficient cluster head replacement and dual transmitting power levels. Thresholding techniques are also incorporated into MODLEACH to further boost performance based on metrics like throughput, network lifetime and cluster head formations. The report analyzes and compares the performance of LEACH, MODLEACH, MODLEACH with hard thresholds and MODLEACH with soft thresholds through simulation and implementation in Qualnet and Matlab.
Architecture and security in Vanet PPT
This document discusses Vehicular Ad-Hoc Networks (VANETs) which allow vehicles to communicate with each other to share safety and traffic information. It outlines the architecture of VANETs including vehicle-to-vehicle and vehicle-to-infrastructure communication. The document also discusses security issues in VANETs such as bogus information attacks, identity disclosure, and denial-of-service attacks. It proposes the use of authentication, message integrity, privacy, traceability and availability to address these security requirements. The document assumes that roadways are divided into regions managed by trusted roadside infrastructure units.
Scada and power system automation
The document discusses supervisory control and data acquisition (SCADA) systems. It defines SCADA and provides a brief history. It describes common SCADA components like remote terminal units (RTU), programmable logic controllers (PLC), human-machine interfaces, and data acquisition servers. It discusses the system components, future trends moving to networked systems, and applications in power system automation including intelligent electronic devices and automation processes. It concludes that India is moving towards greater power grid automation for increased efficiency and standardization.
Wireless WANs
Wireless WANs use cellular networks and satellites to transmit data over vast distances. They provide connectivity inside and outside buildings using technologies like CDMA, GSM, and GPRS. Key components include small, mobile user devices, radio network interface cards, cell towers as base stations, and satellites in orbit that receive and transmit signals. Wireless WANs come in cellular-based and space-based varieties, with cellular systems using cell towers and data gateways and satellite systems using orbiting satellites and ground-based antennas and base stations. Modulation techniques for wireless transmission include FDMA, TDMA, and CDMA.
Hub vs-switch
A hub is a networking device that connects multiple computers to a single network using Ethernet, Firewire, or USB connections. It operates at the physical layer of the OSI model and broadcasts all incoming data to all ports, which can cause collisions. A switch is a networking device that connects network segments and operates at the data link layer. It stores MAC addresses in a lookup table to route data only to necessary ports, preventing collisions. Switches allow full duplex communication and the implementation of features like VLANs, spanning trees, and more advanced routing capabilities compared to hubs.
Wireless intelligent networking
Wireless intelligent networking allows service providers to introduce new services quickly through an evolving network architecture. It uses standards like CAMEL and WIN to enable features controlled outside the switch like pre-paid calling. The architecture includes elements like the SCP and IP that contain service logic and resources, interacting with other networks through signaling protocols like SS7.
Telecommunication basics
Telecommunication involves the transmission of information using technology. It has basic elements including a transmitter, transmission medium, and receiver. Telecommunication occurs through various channels and technologies like telephone networks, cellular networks, and the internet. Common concepts include modulation, multiplexing, circuit switching, and packet switching. Modern cellular technologies progression includes 2G, 3G, LTE, and VoLTE networks that provide improved data speeds and services. ADSL uses frequencies on copper telephone lines to provide faster internet speeds than traditional modems.
Introduction to VANET
The document discusses Vehicular Ad-Hoc Networks (VANETs) which allow vehicles to communicate with each other to share safety and traffic information. It outlines the architecture of VANETs including vehicle-to-vehicle and vehicle-to-roadside communications. The document then covers security challenges in VANETs such as threats to availability, authentication, and confidentiality. It also discusses challenges like mobility, volatility, and balancing privacy with authentication and liability. Finally, it lists security requirements for VANETs including message authentication, non-repudiation, availability, and privacy protection.
Enterprise Application Integration
Stay on top of the newest technologies for seamless business operations with Enterprise Application Integration! EAI offers businesses an efficient and cost-effective way to enable end-to-end connectivity between applications, maximize efficiency and enable automation. Find out more about this exciting emerging technology.
Smart grid and hydo electric power power plant
introduction to smart grid, components, types, etc
&
hydo electric power power plant viz. upper sindh power plant kangan ganderbal kmr.
vehicular communications
vehicular communications
ubiquitous system for sustainable mobility
prepared by
SAIKIRAN GUDURI
VAAGDEVI COLLEGE OF ENGINEERING
WARANGAL
ICT for Automotive Industry
This document discusses challenges in circuit testing for the automotive industry and how Agilent has addressed them. It outlines four main challenges: 1) larger boards and faster cycle times, 2) larger ICs with increased functionality, 3) mandatory on-board programming, and 4) worldwide deployment management. The document then explains how Agilent has solved these challenges through technologies like test point accessibility solutions, scalable testing platforms, and features that improve throughput.
Under Water wireless communication
While wireless communication technology today has become part of our daily life, the
idea of wireless undersea communications may still seem far-fetched. However, research has
been active for over a decade on designing the methods for wireless information transmission
underwater. Human knowledge and understanding of the world’s oceans, which constitute
the major part of our planet, rests on our ability to collect information from remote undersea
locations.
The major discoveries of the past decades, such as the remains of Titanic, or the hydrothermal
vents at bottom of deep ocean, were made using cabled submersibles. Although such
systems remain indispensable if high-speed communication link is to exists between the
remote end and the surface, it is natural to wonder what one could accomplish without the
burden (and cost) of heavy cables.
Wireless Application Protocol ppt
WAP (Wireless Application Protocol) is a standard for accessing information on mobile devices like phones. It uses WML (Wireless Markup Language) instead of HTML. WAP has a layered architecture including application, session, security, transaction, and transport layers. It allows access to the internet from mobile devices in a standardized way and is supported by most phone manufacturers and wireless networks.
Fault management presentation
The document discusses fault management and proactive maintenance in telecommunications networks. It covers topics like fault diagnosis, alarm correlation, health checks, and backup plans. The key aspects are:
1) Fault management involves detecting, isolating, and correcting faults to ensure normal network functioning. It analyzes information and abnormalities during operations.
2) Proactive maintenance aims to reduce errors and prepare for situations where faults cannot be easily fixed. This includes health checks to verify system status and software levels, as well as backup plans for major faults.
3) Other sections provide definitions of terms like faults, alarms, and explain concepts such as fault diagnosis, alarm correlation, health checks and their components, and backup verification.
Substation Automation
The document discusses substation automation, including its basic functions, levels (station and bay), equipment, communication protocols, and advantages. It describes the station computer, GPS receiver, bay control units, protection relays, communication facilities using Ethernet switches, and remote monitoring capabilities. The document also outlines open system architecture following IEC 61850 standards, advanced functions like power quality monitoring, and future integration opportunities. Drawbacks are listed related to legacy systems, skills, expertise, funding, and management philosophy.
Rf module
Introduction to RF Module and its parts and its types.
1) Introduction
2) different modules and ranges
3) RF transmitter
4) RF receiver
5) Transceiver
6) Applications
7) Characterstics
Interconnection issue in microgrid
This document discusses issues related to interconnecting microgrids. It describes how a DC microgrid system utilizes a DC bus to distribute power from photovoltaic units and battery storage to local households. Interconnection can be done directly through switchgear or power electronic interfaces. Key issues that can arise include voltage and frequency fluctuations that occur due to imbalance between supply and demand, power factor correction needs, and harmonics produced by some loads. Unintentional islanding is also a safety concern that must be addressed when connecting microgrids to the main power grid.
CISSP - Chapter 4 - Intranet and extranets
This document provides information on various intranet, extranet, and wide area network (WAN) technologies. It discusses unified threat management (UTM), content distribution networks (CDN), software-defined networking (SDN), metropolitan area networks (MAN), and common WAN concepts and technologies including CSU/DSU, switching, frame relay, X.25, and asynchronous transfer mode (ATM).
Ashrae presentation Managing BMS systems
This document provides an overview of Terry Rodgers' presentation on managing, monitoring, and controlling building systems. The presentation covers various types of monitoring and control systems like DDC, DCS, PLC, and SCADA. It discusses challenges in deploying these systems and differentiating between controls and monitoring. Key aspects of alarm management, filtering, escalation, maintenance, standard operating procedures, and commissioning of monitoring and control systems are summarized. The document encourages participation in ASHRAE and completing an evaluation form.
SCADA Masterclass Presentation on power transmission substations
Step into the world of SCADA systems and discover their vital role in transmission substations. This master class presentation takes you on a journey through the architecture, functionalities, and real-world benefits of SCADA. Learn how it empowers real-time data management, monitoring, and automation, ensuring smoother operations. Dive into crucial cybersecurity insights and explore inspiring case studies showcasing successful SCADA implementations. Together, let's explore the future trends and innovations shaping our power grid's resilience. Join us as we unlock the potential of SCADA to enhance efficiency and security in transmission substations.
Basic Computer Network types and typologies
The document discusses different types of computer networks. A local area network (LAN) connects devices within a single location like a school or office, while a wide area network (WAN) connects LANs over a larger geographical area using public infrastructure like the Internet. A metropolitan area network (MAN) is larger than a LAN but smaller than a WAN, typically encompassing a city. Networks can be configured in different topologies like bus, star, ring, and peer-to-peer. They can also use different architectures like client-server, where a server provides resources to client devices, or peer-to-peer where devices have equal priority and share resources directly.
Distributed load balancing with multiple datacenter analysis
This document discusses distributed load balancing across multiple data centers. It aims to achieve load balancing using a distributed system to increase performance and resource utilization, and to analyze large amounts of data using Hadoop. The key objectives are to distribute dynamic local workloads across nodes in cloud computing to avoid single points of failure, and to efficiently analyze huge amounts of data from data centers.
More Related Content
What's hot
Scada and power system automation
The document discusses supervisory control and data acquisition (SCADA) systems. It defines SCADA and provides a brief history. It describes common SCADA components like remote terminal units (RTU), programmable logic controllers (PLC), human-machine interfaces, and data acquisition servers. It discusses the system components, future trends moving to networked systems, and applications in power system automation including intelligent electronic devices and automation processes. It concludes that India is moving towards greater power grid automation for increased efficiency and standardization.
Wireless WANs
Wireless WANs use cellular networks and satellites to transmit data over vast distances. They provide connectivity inside and outside buildings using technologies like CDMA, GSM, and GPRS. Key components include small, mobile user devices, radio network interface cards, cell towers as base stations, and satellites in orbit that receive and transmit signals. Wireless WANs come in cellular-based and space-based varieties, with cellular systems using cell towers and data gateways and satellite systems using orbiting satellites and ground-based antennas and base stations. Modulation techniques for wireless transmission include FDMA, TDMA, and CDMA.
Hub vs-switch
A hub is a networking device that connects multiple computers to a single network using Ethernet, Firewire, or USB connections. It operates at the physical layer of the OSI model and broadcasts all incoming data to all ports, which can cause collisions. A switch is a networking device that connects network segments and operates at the data link layer. It stores MAC addresses in a lookup table to route data only to necessary ports, preventing collisions. Switches allow full duplex communication and the implementation of features like VLANs, spanning trees, and more advanced routing capabilities compared to hubs.
Wireless intelligent networking
Wireless intelligent networking allows service providers to introduce new services quickly through an evolving network architecture. It uses standards like CAMEL and WIN to enable features controlled outside the switch like pre-paid calling. The architecture includes elements like the SCP and IP that contain service logic and resources, interacting with other networks through signaling protocols like SS7.
Telecommunication basics
Telecommunication involves the transmission of information using technology. It has basic elements including a transmitter, transmission medium, and receiver. Telecommunication occurs through various channels and technologies like telephone networks, cellular networks, and the internet. Common concepts include modulation, multiplexing, circuit switching, and packet switching. Modern cellular technologies progression includes 2G, 3G, LTE, and VoLTE networks that provide improved data speeds and services. ADSL uses frequencies on copper telephone lines to provide faster internet speeds than traditional modems.
Introduction to VANET
The document discusses Vehicular Ad-Hoc Networks (VANETs) which allow vehicles to communicate with each other to share safety and traffic information. It outlines the architecture of VANETs including vehicle-to-vehicle and vehicle-to-roadside communications. The document then covers security challenges in VANETs such as threats to availability, authentication, and confidentiality. It also discusses challenges like mobility, volatility, and balancing privacy with authentication and liability. Finally, it lists security requirements for VANETs including message authentication, non-repudiation, availability, and privacy protection.
Enterprise Application Integration
Stay on top of the newest technologies for seamless business operations with Enterprise Application Integration! EAI offers businesses an efficient and cost-effective way to enable end-to-end connectivity between applications, maximize efficiency and enable automation. Find out more about this exciting emerging technology.
Smart grid and hydo electric power power plant
introduction to smart grid, components, types, etc
&
hydo electric power power plant viz. upper sindh power plant kangan ganderbal kmr.
vehicular communications
vehicular communications
ubiquitous system for sustainable mobility
prepared by
SAIKIRAN GUDURI
VAAGDEVI COLLEGE OF ENGINEERING
WARANGAL
ICT for Automotive Industry
This document discusses challenges in circuit testing for the automotive industry and how Agilent has addressed them. It outlines four main challenges: 1) larger boards and faster cycle times, 2) larger ICs with increased functionality, 3) mandatory on-board programming, and 4) worldwide deployment management. The document then explains how Agilent has solved these challenges through technologies like test point accessibility solutions, scalable testing platforms, and features that improve throughput.
Under Water wireless communication
While wireless communication technology today has become part of our daily life, the
idea of wireless undersea communications may still seem far-fetched. However, research has
been active for over a decade on designing the methods for wireless information transmission
underwater. Human knowledge and understanding of the world’s oceans, which constitute
the major part of our planet, rests on our ability to collect information from remote undersea
locations.
The major discoveries of the past decades, such as the remains of Titanic, or the hydrothermal
vents at bottom of deep ocean, were made using cabled submersibles. Although such
systems remain indispensable if high-speed communication link is to exists between the
remote end and the surface, it is natural to wonder what one could accomplish without the
burden (and cost) of heavy cables.
Wireless Application Protocol ppt
WAP (Wireless Application Protocol) is a standard for accessing information on mobile devices like phones. It uses WML (Wireless Markup Language) instead of HTML. WAP has a layered architecture including application, session, security, transaction, and transport layers. It allows access to the internet from mobile devices in a standardized way and is supported by most phone manufacturers and wireless networks.
Fault management presentation
The document discusses fault management and proactive maintenance in telecommunications networks. It covers topics like fault diagnosis, alarm correlation, health checks, and backup plans. The key aspects are:
1) Fault management involves detecting, isolating, and correcting faults to ensure normal network functioning. It analyzes information and abnormalities during operations.
2) Proactive maintenance aims to reduce errors and prepare for situations where faults cannot be easily fixed. This includes health checks to verify system status and software levels, as well as backup plans for major faults.
3) Other sections provide definitions of terms like faults, alarms, and explain concepts such as fault diagnosis, alarm correlation, health checks and their components, and backup verification.
Substation Automation
The document discusses substation automation, including its basic functions, levels (station and bay), equipment, communication protocols, and advantages. It describes the station computer, GPS receiver, bay control units, protection relays, communication facilities using Ethernet switches, and remote monitoring capabilities. The document also outlines open system architecture following IEC 61850 standards, advanced functions like power quality monitoring, and future integration opportunities. Drawbacks are listed related to legacy systems, skills, expertise, funding, and management philosophy.
Rf module
Introduction to RF Module and its parts and its types.
1) Introduction
2) different modules and ranges
3) RF transmitter
4) RF receiver
5) Transceiver
6) Applications
7) Characterstics
Interconnection issue in microgrid
This document discusses issues related to interconnecting microgrids. It describes how a DC microgrid system utilizes a DC bus to distribute power from photovoltaic units and battery storage to local households. Interconnection can be done directly through switchgear or power electronic interfaces. Key issues that can arise include voltage and frequency fluctuations that occur due to imbalance between supply and demand, power factor correction needs, and harmonics produced by some loads. Unintentional islanding is also a safety concern that must be addressed when connecting microgrids to the main power grid.
What's hot (17)
Similar to Centralized decentralized discrete control systems
CISSP - Chapter 4 - Intranet and extranets
This document provides information on various intranet, extranet, and wide area network (WAN) technologies. It discusses unified threat management (UTM), content distribution networks (CDN), software-defined networking (SDN), metropolitan area networks (MAN), and common WAN concepts and technologies including CSU/DSU, switching, frame relay, X.25, and asynchronous transfer mode (ATM).
Ashrae presentation Managing BMS systems
This document provides an overview of Terry Rodgers' presentation on managing, monitoring, and controlling building systems. The presentation covers various types of monitoring and control systems like DDC, DCS, PLC, and SCADA. It discusses challenges in deploying these systems and differentiating between controls and monitoring. Key aspects of alarm management, filtering, escalation, maintenance, standard operating procedures, and commissioning of monitoring and control systems are summarized. The document encourages participation in ASHRAE and completing an evaluation form.
SCADA Masterclass Presentation on power transmission substations
Step into the world of SCADA systems and discover their vital role in transmission substations. This master class presentation takes you on a journey through the architecture, functionalities, and real-world benefits of SCADA. Learn how it empowers real-time data management, monitoring, and automation, ensuring smoother operations. Dive into crucial cybersecurity insights and explore inspiring case studies showcasing successful SCADA implementations. Together, let's explore the future trends and innovations shaping our power grid's resilience. Join us as we unlock the potential of SCADA to enhance efficiency and security in transmission substations.
Basic Computer Network types and typologies
The document discusses different types of computer networks. A local area network (LAN) connects devices within a single location like a school or office, while a wide area network (WAN) connects LANs over a larger geographical area using public infrastructure like the Internet. A metropolitan area network (MAN) is larger than a LAN but smaller than a WAN, typically encompassing a city. Networks can be configured in different topologies like bus, star, ring, and peer-to-peer. They can also use different architectures like client-server, where a server provides resources to client devices, or peer-to-peer where devices have equal priority and share resources directly.
Distributed load balancing with multiple datacenter analysis
This document discusses distributed load balancing across multiple data centers. It aims to achieve load balancing using a distributed system to increase performance and resource utilization, and to analyze large amounts of data using Hadoop. The key objectives are to distribute dynamic local workloads across nodes in cloud computing to avoid single points of failure, and to efficiently analyze huge amounts of data from data centers.
Network Load Balancing.pptx
Load balancing distributes network or application traffic across multiple servers to optimize resource utilization and minimize response times. It involves monitoring the servers and directing incoming traffic to the server best able to handle it. Common algorithms include least connections, which sends traffic to the server with the fewest active connections, and round robin, which distributes traffic evenly in a circular fashion. Factors like network address translation requirements, server processing speeds, memory limitations, and application dependencies must be considered when selecting a load balancing method.
Wireless Water Monitoring System
The document discusses wireless water monitoring systems. It describes how wireless systems can provide cost-effective remote monitoring of water levels, flows and other parameters without the need for wiring. Wireless systems use radio transmitters and receivers to transmit data from sensors to control rooms or the cloud. The document outlines the architecture of wireless systems and their applications in industries such as oil and gas, manufacturing and utilities to monitor assets like tanks, pumps and pipelines from remote locations.
VL2: A scalable and flexible Data Center Network
This Data Center Network Architecture introduces a virtual layer 2.5 in the protocol stack of hosts and uses a directory service to achieve efficient forwarding. It uses separate location/identifier IPs
Networks1
This document discusses various topics related to computer networks including transmission media, different types of network installations, types of networks like LAN, MAN, and WAN. It also covers network security tools, client-server and peer-to-peer network configurations, and common network applications like email, FTP, and the world wide web. The key purposes of networks are to enable sharing of information and hardware resources between connected systems.
Element Management Subsystem
The document discusses different element management systems (EMS) used to manage network elements. It describes what an EMS is and its key functions like service provisioning, assurance, operations support, and automation. It then summarizes Nortel and Redback Networks' EMS architectures, features, and capabilities. Nortel's EMS focuses on managing VoIP media gateways while Redback's provides fault management, service provisioning, inventory management, and real-time statistics through an intuitive GUI. Both EMS systems are designed to scale with network growth and complexity.
Introduction to Distributed Systems
A distributed system is a collection of independent computers that appears as a single coherent system to users. Distributed systems allow for resource sharing, increased availability, reliability, fault tolerance, and scalability by utilizing multiple computers. However, distributed systems present challenges around coordination between nodes, fault tolerance, and consistency when nodes or network connections fail.
08. networking-part-2
This document provides an overview of key concepts in IT infrastructure architecture related to networking. It discusses the presentation and application layers, protocols like SSL/TLS, HTTP, and email protocols. It also covers infrastructure services like DHCP, DNS, NTP, and IPAM systems. Additionally, it summarizes network virtualization techniques like VLANs, VXLANs, virtual NICs, and virtual switches. Finally, it discusses software defined networking, network function virtualization, layered network topologies, spine-leaf architectures, network teaming, and the spanning tree protocol.
CNE CHP1.pdf
This document provides an overview of a computer network course, including its outcomes, chapters, and key concepts. The first chapter covers fundamentals of computer networks, including definitions of networks and computer networks, and the need for and applications of computer networks. It also discusses advantages of computer networks and classifications based on geographical area and transmission technology. Network computing models like peer-to-peer, client-server, and distributed systems are defined along with their characteristics. The roles and functions of network operating systems are outlined.
Software-Defined Networking Layers presentation
Software-Defined Networking Layers as Proposed by the Comprehensive Survey done on the topic:
Kreutz, D., Ramos, F. M., Verissimo, P. E., Rothenberg, C. E., Azodolmolky, S., & Uhlig, S. (2015). Software-defined networking: A comprehensive survey.Proceedings of the IEEE,103(1), 14-76.
The 8 layers are simply presented to be easily understood by the attendees.
WLAN Architecture - Considerations
Some enterprise WLAN history, Explaining the three working planes of a WLAN, Centralized architecture, pros and cons, Distributed architecture, pros and cons,Summary and an extra slide on redundancy.
Cloud Technology Brief 2013 Q1 - Thailand
Introduction to Cloud Technology slide was prepared for Linux/Unix class lecture at Department of Computer Engineering, Chulalongkorn University in Jan 2013.
Design space for user interface architectures
This document discusses user interface architecture design spaces. It covers control flow, communication, and synchronization issues between modules. Communication can occur through shared state, events, or both. Control flow mechanisms include standard processes, lightweight processes, non-preemptive processes, event handlers, and interrupt service routines. The best mechanism depends on factors like communication costs, security needs, and response time constraints.
Well_Monitoring_System_DataComm_Technology.pdf
This document discusses well monitoring systems using advanced data communication technology. It covers the importance of well monitoring for operational insights, safety, asset integrity and cost efficiency. It also discusses challenges with traditional monitoring methods. The document then provides an overview of data communication components and types, including transmission medium, computer networks, protocols and wireless technologies. It describes a communication system using high-speed data transmission, secure encryption and redundant channels for remote well monitoring and control.
Distributed Control System
A Distributed Control System (DCS) integrates multiple process controllers and PLCs to monitor and control distributed equipment remotely. There are several types of DCS including Smart DCS and SixTrak IPm. When choosing a DCS system, factors like reliability, compatibility, graphical interface, processing speed, cost and ease of use must be considered. DCS systems have advantages like robustness, flexibility and security but also disadvantages like component costs and difficulty of programming and maintenance. Major DCS manufacturers include Honeywell, ABB and Siemens. In Saudi Arabia, DCS systems are used by companies like Saudi Aramco, power plants and factories.
Migrating IBM i Systems to the Cloud: Exploring the Pros and Cons
In today's dynamic IT landscape, businesses running IBM Power Systems are continuously seeking ways to optimize their infrastructure and leverage cutting-edge technologies. Migrating IBM i and AIX workloads to the cloud has emerged as a compelling option for many organizations, offering a host of potential benefits. However, it is crucial to carefully weigh the pros and cons of cloud migration before making a decision.
In this webinar, we'll delve into the intricate world of IBM i cloud migration, equipping you with the knowledge to make an informed choice.
Join us for this webcast to hear about:
• The compelling advantages of migrating to the cloud
• The potential challenges of migration
• Recommended best practices for undertaking a migration
Similar to Centralized decentralized discrete control systems (20)
SCADA Masterclass Presentation on power transmission substations
SCADA Masterclass Presentation on power transmission substations
Distributed load balancing with multiple datacenter analysis
Distributed load balancing with multiple datacenter analysis
Migrating IBM i Systems to the Cloud: Exploring the Pros and Cons
Migrating IBM i Systems to the Cloud: Exploring the Pros and Cons
Recently uploaded
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Recently uploaded (20)
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Centralized decentralized discrete control systems
- 3. What is DCS? • Centralised • Decentralised
- 4. Centralized • Single Master - Slave(s) system • All Stations depend on single central controller to sent and receive information • No direct contact between stations
- 5. Centralized • Disadvantages : • Reliability . • Wiring and installation costs. • The complexity is high for a system handling very large number of variables simultaneously.
- 6. Decentralized • Hierarchical Control Distribution • Central Controller >Local Controller > Stations • Different Local Controllers might not be connected together • Also known as Layered or Hierarchical system
- 7. Decentralized • Advantages : • Lower implementation and upgrading cost • More reliable, flexible • Less complex • Lower cost of interfacing
- 8. Distributed Control System • Customizable Decentralized System • Hierarchy of Controllers are connected by Communication channels • Generally designed with redundancy to handle safety-critical processes
- 10. DCS vs PLC vs SCADA • More Expensive • Control Continues Process • Critical Applications • Process Oriented • Maintains Constant Stream of Data for control • High Speed Machine Control • Data Gathering Oriented • Maintains speed by Storing values and data for use during outrages
- 11. Direct Digital Control Digital Control => Use of Computers Direct Digital Control - A digital computer generates control signals which directly operate the control devices Supervisory Control - A digital computer generates control signals used as reference values for conventional analog controllers
- 12. Distributed Process Control Distributed Process Control System i) Central Control Station ii) Controlling portions
- 13. • Central Control Station - Human Machine Interface Display, Storage, I/O Devices, Control s/w • Controlling Area - Measurement of analog & digital signals - Generation of output to actuators • Communication: By individual channels or shared data highways