The document describes a new line of low voltage circuit breakers called SACE FORMULA. It was created by ABB SACE to be simple and functional. SACE FORMULA combines ABB SACE's quality and reliability with simplicity in installation, sizing, fitting of accessories, and use. It comes in three frame sizes from 125A to 630A and offers various pole configurations. The circuit breakers have reduced depths, simplified ordering through limited product codes, and an easy installation system.
The document describes ABB SACE's new Emax line of low voltage air circuit breakers. It provides an overview of the different models in the Emax family that range from 800A to 6300A and details their construction characteristics, electronic trip units, compliance with standards, and intended applications. The new circuit breakers offer improved performance, flexibility, customization, and connectivity options through their re-engineered releases and protection trip units with intuitive interfaces and Bluetooth connectivity.
Power Cable Accessories upto 42k v (for terminations & joints tender)Eric Bin
Shenzhen Chuangyin Co., Ltd. is a leading company in China for manufacturing of Premoulded terminations, underground cable joints, separable connectors, and equipment bushings for GIS/RMU. Products designed as European standard and American standard, which are suitable for all our clients requirements. For more details, please send mail to sales01@chuangy.com (Marketing manager. Mr. Eric Bin)
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Nexans Euromold 600 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV and 24kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 600 series separable connectors include Nexans Euromold bolted tee connectors and Nexans Euromold bushings (oil and air insulated) for electrical equipment up to 24kV - 1250A. Nexans Euromold 600 series connectors are specified to terminate and connect polymeric (XLPE or EPR) screened (copper tape and wire) cables to ANSI-style Interface Type D (800amp) bushings with either copper or aluminium 5/8" bolted connection.
This document provides information on 3M's Cold Shrink QT-III indoor and outdoor cable terminations and kits. It discusses the benefits of 3M's cold shrink technology including faster, simpler installation with built-in stress control and sealing compounds. It also notes 3M offers flexibility to include specific hardware and provides take-offs and terminating solutions to keep projects on time and budget. The bulk of the document consists of tables listing various single core and three core indoor and outdoor termination kits specifying cable insulation sizes, voltage ratings, and conductor size ranges.
CHUANGYIN split core is widely applied in many globally utilities, and government projects. Any questions please contact sales01@chuangy.com Mr. Eric Bin
This document provides an overview of Thomas & Betts' Elastimold underground cable accessories product line. It lists the voltage and current ratings for various separable connectors, cable joints, and terminations. It also covers applicable industry standards and notes that the products are designed for ambient temperatures from -40°C to +65°C in all underground applications including direct burial and submersion.
Underground Cable Accessories
Elastimold® offers the industry's most complete package for managing underground cable connections.
Broad Product Range..
Elastimold accessories, available from 5kV to 138kV, connect, ground, splice, terminate and protect underground cable.
Elastimold Innovation
Elastimold’s long, innovative history includes pioneering such products as extended and repair elbows, jacket seal elbows, and shrink-fit joints.
The document describes ABB SACE's new Emax line of low voltage air circuit breakers. It provides an overview of the different models in the Emax family that range from 800A to 6300A and details their construction characteristics, electronic trip units, compliance with standards, and intended applications. The new circuit breakers offer improved performance, flexibility, customization, and connectivity options through their re-engineered releases and protection trip units with intuitive interfaces and Bluetooth connectivity.
Power Cable Accessories upto 42k v (for terminations & joints tender)Eric Bin
Shenzhen Chuangyin Co., Ltd. is a leading company in China for manufacturing of Premoulded terminations, underground cable joints, separable connectors, and equipment bushings for GIS/RMU. Products designed as European standard and American standard, which are suitable for all our clients requirements. For more details, please send mail to sales01@chuangy.com (Marketing manager. Mr. Eric Bin)
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Nexans Euromold 600 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV and 24kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 600 series separable connectors include Nexans Euromold bolted tee connectors and Nexans Euromold bushings (oil and air insulated) for electrical equipment up to 24kV - 1250A. Nexans Euromold 600 series connectors are specified to terminate and connect polymeric (XLPE or EPR) screened (copper tape and wire) cables to ANSI-style Interface Type D (800amp) bushings with either copper or aluminium 5/8" bolted connection.
This document provides information on 3M's Cold Shrink QT-III indoor and outdoor cable terminations and kits. It discusses the benefits of 3M's cold shrink technology including faster, simpler installation with built-in stress control and sealing compounds. It also notes 3M offers flexibility to include specific hardware and provides take-offs and terminating solutions to keep projects on time and budget. The bulk of the document consists of tables listing various single core and three core indoor and outdoor termination kits specifying cable insulation sizes, voltage ratings, and conductor size ranges.
CHUANGYIN split core is widely applied in many globally utilities, and government projects. Any questions please contact sales01@chuangy.com Mr. Eric Bin
This document provides an overview of Thomas & Betts' Elastimold underground cable accessories product line. It lists the voltage and current ratings for various separable connectors, cable joints, and terminations. It also covers applicable industry standards and notes that the products are designed for ambient temperatures from -40°C to +65°C in all underground applications including direct burial and submersion.
Underground Cable Accessories
Elastimold® offers the industry's most complete package for managing underground cable connections.
Broad Product Range..
Elastimold accessories, available from 5kV to 138kV, connect, ground, splice, terminate and protect underground cable.
Elastimold Innovation
Elastimold’s long, innovative history includes pioneering such products as extended and repair elbows, jacket seal elbows, and shrink-fit joints.
Nexans Euromold HV high voltage bushings are suitable for use in oil-insulated high voltage electrical equipment up to 33kV- this includes oil-insulated HV bushings for high voltage transformers, motors, switchgear and capacitors. Nexans Euromold bushings are epoxy insulated in accordance with CENELEC EN 50181. Nexans Euromold plug-in bushings 750S1, 775S1, 775T1 meet the requirements of ANSI/IEEE 386 with 800amp and 1250amp current ratings. Nexans HV bushings are suitable for 5/8" threading systems.
Nexans Euromold Oil-Insulated Epoxy HV High Voltage Bushings
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/33 (36kV)
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
The document discusses proper part number selection for Eaton's Cooper Power series 200A and 600A connector products used for terminating XLPE or EPR insulated underground electrical cables. It outlines using the cable conductor size to select the compression connector and using the cable insulation diameter to select an elbow housing that maintains a tight seal. An example is provided to demonstrate selecting the correct 200A loadbreak elbow part number for an AEIC standard 15kV cable with a 1/0 compact stranded conductor and 133% insulation with an outer jacket diameter of 1.07".
1. The document discusses Südkabel's range of accessories for XLPE-insulated high and extra-high voltage cables, including compact terminations, outdoor terminations, and joints.
2. Südkabel offers a variety of compact termination types for different voltage applications that are maintenance-free, quick to install, and can accommodate different cable designs.
3. Outdoor terminations can be filled with liquid insulation or use dry, gas-filled designs. They meet relevant test standards and are available with composite or porcelain insulators.
Elastimold® Shrink-Fit Cable Joints are pre-molded cable splice accessories that use a removable plastic core for easy installation without heat, force, or ripcords. They feature an EPDM rubber housing that provides durability for direct burial applications. The joints are available in four sizes to accommodate a wide range of cable diameters and include options for neutral connections, shielding, and jacket restoration.
12
24
36
42
630
630
630
630
1250
1250
1250
1250
35
35
35
35
300
300
240
240
The document provides information on Euromold, a manufacturer of medium voltage cable accessories. Euromold offers a complete range of underground cable connectors and joints from 12-42kV, including premoulded EPDM rubber connectors and epoxy bushings. All products meet international standards and Euromold has certifications for quality management and electrical testing. The document also provides product details, ordering instructions, and diagrams for various separable connectors from the Interface C product line.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
The document discusses new oil-free and gas-free cable terminations that are more environmentally friendly and faster to install than traditional terminations. They are available for voltages from 52 kV to 170 kV and conductor cross-sections up to 2500 mm2. The terminations do not use liquid or gas insulation, making them explosion-resistant and leak-proof over their lifetime. They are available in flexible and self-supporting designs to suit different applications.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
This document provides information about surge arresters for protecting electrical equipment from high voltage surges. It describes the components, design, and technical specifications of the 156SA series of metal oxide varistor surge arresters for voltages up to 24 kV. Application, dimensions, ordering instructions are also included.
This document provides information on 3M's Cold Shrink QT-III Silicone Rubber Three-Conductor Cable Termination Kit, including a product description, kit contents, features, applications, environmental performance, and termination type selection tables. The kit is designed to terminate medium voltage 3-conductor shielded power cables without ground wires for indoor or outdoor applications in the 5, 8, 15, 25/28, and 35kV classes. The kit contains silicone rubber components that are resistant to heat, UV radiation, ozone, and retain hydrophobicity. Tables provide guidance on selecting the appropriate termination kit based on voltage class, cable insulation size, and installation environment.
This document provides information on 3M medium voltage terminations for JCN and CN cable ranging from 5 kV to 35 kV. It lists various indoor and outdoor termination kits for both 3M's Cold Shrink QT-III and QT-II terminations. The kits contain silicone rubber terminations of different sizes to accommodate different conductor and cable sizes. They are designed for terminating jacketed concentric neutral and concentric neutral power cables.
The document discusses Thomson BSA lead and ball screw products. It provides an overview of lead screw applications and features, including descriptions of custom plastic nuts, custom actuators, precision screw products, and complete assemblies. It also covers product details for advanced anti-backlash supernuts, flange mount supernuts, thread mount supernuts, thread mount bronze nuts, and more. Dimensional drawings and specifications are provided.
The document provides product information for heatshrink cable terminations and joints for voltages ranging from 0.6kV to 36kV. It lists various indoor and outdoor termination part numbers corresponding to cable type (XLPE, PILC), cores (single, three), voltage rating and cable cross section range. It also provides information on related accessories like earthing components and ordering guidelines. Coldshrink terminations are introduced as an alternative with advantages like easier installation without open flames. Technical test standards for heatshrink products are listed at the end.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
This document is a catalogue from Nexans Network Solutions Division Euromold. It provides information on various cable accessories produced by Euromold including separable connectors, bushings, and plugs. The document includes specifications, standards, and ordering information for product items like the 158LR elbow connector, 152SR straight connector, and 151SP straight plug. It also provides diagrams to illustrate the products and their applications for connecting cable to equipment or other cables.
This document is a catalogue from Nexans Network Solutions describing their Euromold division and the products they offer. It provides information on:
- Euromold's position as a leading European manufacturer of prefabricated cable accessories for medium voltage energy distribution.
- Their product range including separable connectors, equipment bushings, in-air bushings, and accessories that meet international standards.
- Technical specifications, designs, standards compliance, ordering information and part numbers for their key products - separable tee connectors, equipment bushings, and accessories.
- Testing procedures, quality certifications, and accreditations held by Euromold to ensure product quality and standards compliance.
The document is a 2014 catalogue from Nexans Network Solutions Division Euromold. It provides information on Euromold's medium voltage cable accessories, including:
- Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution, providing a complete range of accessories for underground cables.
- The catalogue describes Euromold's ISO 9001 certification and independent laboratory accreditation, and notes that all products meet international standards.
- It provides specifications, diagrams and ordering information for various separable connectors and equipment bushings, including elbow connectors, tee connectors, and equipment bushings for interfaces up to 36kV and 400A.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Fuji thiet bi dien-cataloguemccbfuji-160413042900Dien Ha The
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji, Catalog,
Catalog Thiết Bị Điện Fuji, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Fuji, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-cataloguemccbfuji-160413042900 dienhathe.orgDien Ha The
This document provides an overview and specifications for Fuji Electric's molded case circuit breakers (MCCBs). It includes:
1) An introduction to Fuji Electric's G-TWIN MCCB series, which conforms to international standards and offers compact, high-performance breakers.
2) A catalog of MCCB products organized by type, including line protection, motor protection, UL489 listed, and distribution breaker models. Specifications like current ratings and breaking capacities are provided.
3) Sections with additional technical details on MCCBs like type number nomenclature, mounting modifications, terminal connections, wire sizes, dimensions, and characteristic curves.
4) Contact information for Fuji Electric
Nexans Euromold HV high voltage bushings are suitable for use in oil-insulated high voltage electrical equipment up to 33kV- this includes oil-insulated HV bushings for high voltage transformers, motors, switchgear and capacitors. Nexans Euromold bushings are epoxy insulated in accordance with CENELEC EN 50181. Nexans Euromold plug-in bushings 750S1, 775S1, 775T1 meet the requirements of ANSI/IEEE 386 with 800amp and 1250amp current ratings. Nexans HV bushings are suitable for 5/8" threading systems.
Nexans Euromold Oil-Insulated Epoxy HV High Voltage Bushings
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/33 (36kV)
700 Series Interface E Elastimold Cable Connectors and Bushings connect and terminate HV cables to Interface E bushings on switchgear and transformers. Elastimold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F. Elastimold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables. 700 Series Interface E, Elastimold Bushings * Bushing Voltage Range 33kV-36kV * Bushing Current Rating 800Amps & 1250Amps * Bushing Type 5/8" Bolted Aluminium Insert Elastimold separable elbow connectors are high voltage cable terminations used to connect polymeric (XLPE or EPR insulated) power cables to HV equipment including transformers, switchgear, capacitors and motors. 700 Series Connectors - 750LR Tee Connectors & 775LR Tee Connectors 800-1250Amps 35-630sqmm Slip on cable connectors - quick to install to high voltage switchgear and transformers (oil, air and gas insulated) Touchproof cable terminations - made from conductive EPDM rubber, fully screened HV termination for safety One part cable termination - built-in stress relief, insulation and outer semi-conductive layers Maintenance friendly - readily disconnectable cable connector for high voltage maintenance work Compact cable connectors - space-saving HV cable terminations for SF6 gas insulated switchgear (GIS) EPDM rubber cable connectors - resistant to ozone, corona, chemicals, water and atmospheric pollutants Flexibility - Elastimold cable connectors are disconnectable and re-useable. Re-use of the Elastimold high voltage cable connector permits site re-location of HV electrical equipment without requiring cable re-termination. HV High Voltage Cable Connectors, Specification - Elastimold dead-break separable cable connectors suit all international high voltage bushing interfaces for the termination of HV cable into switchgear, transformers and motors. Elastimold cable connectors terminate high voltage power cables (typically 11kV, 15kV, 24kV, 33kV, 36kV up to 52kV) into SF6 GIS gas insulated switchgear including Schneider, ABB, Areva and Siemens. Elastimold cable connectors meet the requirements of ANSI/IEEE 386 & 404 and CENELEC EN50180 & EN50181 for high voltage "dead-break" cable connection, i..e connectors installed and terminated onto un-energised high voltage power cable. US specification "load-break" cable connectors for high voltage energised cable termination are available. High Voltage Cable Connectors - Elastimold cable connectors (elbow and straight types) are specified to terminate XLPE or EPR insulated high voltage power cables with copper tape or copper wire screens up to 52kV. Elastimold cable connectors are available to suit and terminate lead covered HV cables for hydro-carbon industries (oil, gas, petrochemicals) with ATEX certification for hazardous area Zones 1 and Zones 2.
The document discusses proper part number selection for Eaton's Cooper Power series 200A and 600A connector products used for terminating XLPE or EPR insulated underground electrical cables. It outlines using the cable conductor size to select the compression connector and using the cable insulation diameter to select an elbow housing that maintains a tight seal. An example is provided to demonstrate selecting the correct 200A loadbreak elbow part number for an AEIC standard 15kV cable with a 1/0 compact stranded conductor and 133% insulation with an outer jacket diameter of 1.07".
1. The document discusses Südkabel's range of accessories for XLPE-insulated high and extra-high voltage cables, including compact terminations, outdoor terminations, and joints.
2. Südkabel offers a variety of compact termination types for different voltage applications that are maintenance-free, quick to install, and can accommodate different cable designs.
3. Outdoor terminations can be filled with liquid insulation or use dry, gas-filled designs. They meet relevant test standards and are available with composite or porcelain insulators.
Elastimold® Shrink-Fit Cable Joints are pre-molded cable splice accessories that use a removable plastic core for easy installation without heat, force, or ripcords. They feature an EPDM rubber housing that provides durability for direct burial applications. The joints are available in four sizes to accommodate a wide range of cable diameters and include options for neutral connections, shielding, and jacket restoration.
12
24
36
42
630
630
630
630
1250
1250
1250
1250
35
35
35
35
300
300
240
240
The document provides information on Euromold, a manufacturer of medium voltage cable accessories. Euromold offers a complete range of underground cable connectors and joints from 12-42kV, including premoulded EPDM rubber connectors and epoxy bushings. All products meet international standards and Euromold has certifications for quality management and electrical testing. The document also provides product details, ordering instructions, and diagrams for various separable connectors from the Interface C product line.
400 Series Interface C Compact Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface C bushings on switchgear and transformers.
Nexans Euromold provide high voltage cable accessories to suit the 7 main bushing interfaces : A, B, C (Compact), C (Symmetrical), D, E and F.
Nexans Euromold cable joints, cable terminations, epoxy bushings, angled (elbow) and straight plug-in or bolted separable connectors for connecting, jointing and terminating high voltage cables.
The document discusses new oil-free and gas-free cable terminations that are more environmentally friendly and faster to install than traditional terminations. They are available for voltages from 52 kV to 170 kV and conductor cross-sections up to 2500 mm2. The terminations do not use liquid or gas insulation, making them explosion-resistant and leak-proof over their lifetime. They are available in flexible and self-supporting designs to suit different applications.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
This document provides information about surge arresters for protecting electrical equipment from high voltage surges. It describes the components, design, and technical specifications of the 156SA series of metal oxide varistor surge arresters for voltages up to 24 kV. Application, dimensions, ordering instructions are also included.
This document provides information on 3M's Cold Shrink QT-III Silicone Rubber Three-Conductor Cable Termination Kit, including a product description, kit contents, features, applications, environmental performance, and termination type selection tables. The kit is designed to terminate medium voltage 3-conductor shielded power cables without ground wires for indoor or outdoor applications in the 5, 8, 15, 25/28, and 35kV classes. The kit contains silicone rubber components that are resistant to heat, UV radiation, ozone, and retain hydrophobicity. Tables provide guidance on selecting the appropriate termination kit based on voltage class, cable insulation size, and installation environment.
This document provides information on 3M medium voltage terminations for JCN and CN cable ranging from 5 kV to 35 kV. It lists various indoor and outdoor termination kits for both 3M's Cold Shrink QT-III and QT-II terminations. The kits contain silicone rubber terminations of different sizes to accommodate different conductor and cable sizes. They are designed for terminating jacketed concentric neutral and concentric neutral power cables.
The document discusses Thomson BSA lead and ball screw products. It provides an overview of lead screw applications and features, including descriptions of custom plastic nuts, custom actuators, precision screw products, and complete assemblies. It also covers product details for advanced anti-backlash supernuts, flange mount supernuts, thread mount supernuts, thread mount bronze nuts, and more. Dimensional drawings and specifications are provided.
The document provides product information for heatshrink cable terminations and joints for voltages ranging from 0.6kV to 36kV. It lists various indoor and outdoor termination part numbers corresponding to cable type (XLPE, PILC), cores (single, three), voltage rating and cable cross section range. It also provides information on related accessories like earthing components and ordering guidelines. Coldshrink terminations are introduced as an alternative with advantages like easier installation without open flames. Technical test standards for heatshrink products are listed at the end.
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
This document is a catalogue from Nexans Network Solutions Division Euromold. It provides information on various cable accessories produced by Euromold including separable connectors, bushings, and plugs. The document includes specifications, standards, and ordering information for product items like the 158LR elbow connector, 152SR straight connector, and 151SP straight plug. It also provides diagrams to illustrate the products and their applications for connecting cable to equipment or other cables.
This document is a catalogue from Nexans Network Solutions describing their Euromold division and the products they offer. It provides information on:
- Euromold's position as a leading European manufacturer of prefabricated cable accessories for medium voltage energy distribution.
- Their product range including separable connectors, equipment bushings, in-air bushings, and accessories that meet international standards.
- Technical specifications, designs, standards compliance, ordering information and part numbers for their key products - separable tee connectors, equipment bushings, and accessories.
- Testing procedures, quality certifications, and accreditations held by Euromold to ensure product quality and standards compliance.
The document is a 2014 catalogue from Nexans Network Solutions Division Euromold. It provides information on Euromold's medium voltage cable accessories, including:
- Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution, providing a complete range of accessories for underground cables.
- The catalogue describes Euromold's ISO 9001 certification and independent laboratory accreditation, and notes that all products meet international standards.
- It provides specifications, diagrams and ordering information for various separable connectors and equipment bushings, including elbow connectors, tee connectors, and equipment bushings for interfaces up to 36kV and 400A.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Fuji thiet bi dien-cataloguemccbfuji-160413042900Dien Ha The
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji, Catalog,
Catalog Thiết Bị Điện Fuji, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Fuji, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-cataloguemccbfuji-160413042900 dienhathe.orgDien Ha The
This document provides an overview and specifications for Fuji Electric's molded case circuit breakers (MCCBs). It includes:
1) An introduction to Fuji Electric's G-TWIN MCCB series, which conforms to international standards and offers compact, high-performance breakers.
2) A catalog of MCCB products organized by type, including line protection, motor protection, UL489 listed, and distribution breaker models. Specifications like current ratings and breaking capacities are provided.
3) Sections with additional technical details on MCCBs like type number nomenclature, mounting modifications, terminal connections, wire sizes, dimensions, and characteristic curves.
4) Contact information for Fuji Electric
Fuji thiet bi dien-catalogue-mccb-fuji
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
Fuji thiet bi dien-catalogue-mccb-fuji dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Fuji thiet bi dien-cataloguemccbfuji-160413042900Thuan Kieu
Fuji thiet bi dien-cataloguemccbfuji-160413042900
Catalog Fuji,
Catalog Thiết Bị Điện Fuji,
Catalog Điện Công Nghiệp Fuji,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Fuji tại https://dienhathe.com
Để nhận báo giá sản phẩm Fuji vui lòng gọi: 0907.764.966
This document provides an overview and specifications for ABB's OS switch fuses ranging from 16 to 1250 amps. It describes the key features of the switch fuses including their compact design that saves space, easy installation in various orientations, and high performance ratings. The document also provides details on accessories, manual and motorized operation options, and fuse compatibility for the different switch fuse models.
This document provides information on the Type KON-17 outdoor current transformer. It is used in 12 and 17.5 kV circuits for measuring and protective applications. The transformer features a toroidal core with primary and secondary windings cast in epoxy resin for insulation and protection. It has a weight of approximately 44 lbs and can be mounted in upright, cantilever, or upside-down positions on poles or structures. Test reports and specifications ensure the transformer meets applicable standards.
The document provides information on ABB's AX contactor range, including:
1) Key features such as simplified selection, faster installation, proven reliability, and tested component combinations.
2) Technical specifications for IEC and UL/CSA rated motor currents from 0.06 kW to 1000 kW and voltages from 120V to 690V.
3) Details on the contactor range from AX06 to AX80, including AC-3 rated operational power from 3kW to 18.5kW at 400V.
Catalog MCCB & ACB Fuji Electric dòng G-TWIN Mới Nhất 2019CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến Quý khách hàng Catalog MCCB & ACB Fuji Electric Mới Nhất (2019) gồm
MCCB (Molded case circuit breakers ) dòng G-TWIN
ACB (Air circuit breakers) dòng DH
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
MCCB Fuji - Molded Case Circuit Breakers Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
This document provides technical data for ABB's OT series of switch-disconnectors ranging from 16A to 3150A, including information on:
- Rated voltage, insulation, breaking capacity, and short circuit ratings
- Rated operational and breaking currents for AC and DC applications
- Power loss and mechanical endurance specifications
- Dimensional and connection details
The switch-disconnectors can be used in motor control centers, switchboards, and industrial equipment. The technical data follows IEC standards and allows selection of the appropriate switch-disconnector for an application based on required ratings.
1VGA671004 - UniGear ZVC Standard Product.pptNafir Anas
This document provides information on the UniGear ZVC standard product air insulated switchgear from ABB. It includes specifications on its certifications, internal arc containment, current ratings, electrical characteristics, dimensions, basic structure, contactor and fuse components. Comparisons are made between the UniGear ZVC and circuit breaker technologies, showing the ZVC requires less floor space and lower cable costs due to its fault current limiting fuses. Project savings are possible using the UniGear ZVC solution.
This document provides specifications for the KYN10-HV switchgear from Rockwill Electric Co., Ltd. It is a 36/40.5kV metal-clad withdrawable switchgear that can be used for power distribution in power plants, substations, factories and other industrial applications. It meets the IEC62271-200 standard and can be used with vacuum circuit breakers from Siemens, Rockwill, and others. The switchgear is equipped to allow front-end maintenance and has a rated current of 630-3150A and can withstand short circuit currents of 63/80/100kA. Dimensions and weights are provided for the units. Ordering and technical support contact information is included
RK Engineering AF contactors_overload relays catalog_1SXU100109C0201.pdfRK Engineering
The document provides information about motor ratings and currents for various motor powers and voltages. It includes tables with standardized current values according to IEC 60947-4-1 Annex G and UL 60947-4-1A. It also discusses ABB's AF range of contactors and overload relays, their benefits over conventional alternatives, and their applications in various industries.
This document provides information on DC switch-disconnectors for photovoltaic installations, including their main features, ratings, and applications. The switches are designed according to UL98B, UL508i, and IEC/EN 60947 standards and are available in ratings from 16 to 630 amps and 1000-1500 volts. They provide load break switching capability and various mounting and interlocking options for use in solar inverters, combiner boxes, and battery chargers to safely isolate circuits during maintenance.
This document provides information on DC switch-disconnectors for photovoltaic installations, including their main features, ratings, and applications. The switches are designed according to UL98B, UL508i, and IEC/EN 60947 standards and are available in ratings from 16 to 630 amps and 1000-1500 volts. They provide load break switching capability and various mounting and interlocking options for use in solar inverters, combiner boxes, and battery chargers to safely isolate circuits during maintenance.
Avnet Electronics Marketing presents power devices for solar inverters from STMicroelectronics. Presentation includes: ST 600 vs. SiC diodes, Power MOSFET families, MDmesh series. Choosing the ideal switches for solar inverters and more.
Similar to Catalogue thiet bi dien abb mccb abb (20)
This document provides a quick start guide for the FED-C Series AC drive. It includes information on safety, wiring, the operating panel, quick setup, standard parameters, troubleshooting, and revision history. The guide contains basic instructions to get started with installation and configuration of the AC drive.
Fed e-quick-start-manual-bientanfuji-dienhathe.comDien Ha The
This quick start guide provides instructions for setting up and operating an inverter. It begins with an overview of product information, including nameplate details and specifications. It then covers wiring, including diagrams for 3-phase and single-phase power supply types. Terminal functions are described for the main circuit and control circuit. The guide presents a timing diagram for the control logic and acceleration/deceleration profiles. It concludes with a step-by-step setup process, including getting familiar with the keypad, setting motor parameters, checking rotation direction, and setting function codes for features like the startup frequency and DC injection braking.
Bảng giá LS 2019 - Bảng giá mới sẽ áp dụng từ ngày 20.0.2019
Để cập nhật các bảng giá mới lĩnh vực thiết bị điện Công
Nghiệp.Quý khách vui lòng vào link bên dưới
https://www.dienhathe.com/download/bang-gia-dien-cong-nghiep/?filter_nam=2019&filter_tai-lieu=bang-gia
Mitsubishi graphic operation terminal got2000 series parts library bookDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter fr-a700-instruction-manualbasic-160425031653Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series gt2103 new product releaseDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series got mobile function quic...Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series drive control interactiv...Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage ws-v series mccb and elcbDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi graphic operation terminal got2000 series (concise)Dien Ha The
- Monitor the GOT screen from a remote location.
- Switch screens and operate touch switches.
Control:
- Monitor and operate the GOT from a remote location.
- Switch screens, operate touch switches, change settings, and more.
Number of
simultaneous
connections
1 client
Multiple clients✽1
Screen
switching
Not possible
Possible✽2
Client OS
Windows, Linux, macOS, Android, iOS
Windows, Linux, macOS, Android, iOS
Client software
- Web browser
- Viewer software
- Web browser
- VNC client software✽3
Mitsubishi low voltage ws-v series comparison of previous and new modelsDien Ha The
1. The document compares previous and new models of molded-case circuit breakers and earth-leakage circuit breakers.
2. It outlines differences in dimensions, performance, and specifications between previous W & WS series models and new WS-V series models. Key changes include changes in tripping methods, operating characteristics, dimensions, rated currents, and breaking capacities.
3. Replacement models are identified for previous models, along with any drilling dimension or front plate cutout changes between models. Some models were added or had specifications adjusted.
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage miniature circuit breakers din seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi low voltage mccb and elcb(ws-v series) y0720-version 1-mitsuDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter freqrol-f700 pj seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter catalog-mitsubishi-inverter-option-160426021125Dien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...Herman Kienhuis
Presentation by Herman Kienhuis (Curiosity VC) on developments in AI, the venture capital investment landscape and Curiosity VC's approach to investing, at the alumni event of Amsterdam Business School (University of Amsterdam) on June 13, 2024 in Amsterdam.
Cover Story - China's Investment Leader - Dr. Alyce SUmsthrill
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
AI Transformation Playbook: Thinking AI-First for Your BusinessArijit Dutta
I dive into how businesses can stay competitive by integrating AI into their core processes. From identifying the right approach to building collaborative teams and recognizing common pitfalls, this guide has got you covered. AI transformation is a journey, and this playbook is here to help you navigate it successfully.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART INDIA MATKA KALYAN SATTA MATKA 420 INDIAN MATKA SATTA KING MATKA FIX JODI FIX FIX FIX SATTA NAMBAR MATKA INDIA SATTA BATTA
Call8328958814 satta matka Kalyan result satta guessing➑➌➋➑➒➎➑➑➊➍
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
Tired of chasing down expiring contracts and drowning in paperwork? Mastering contract management can significantly enhance your business efficiency and productivity. This guide unveils expert secrets to streamline your contract management process. Learn how to save time, minimize risk, and achieve effortless contract management.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
1. SACE FORMULA.
New low voltage moulded-case
circuit-breakers.
brochure_FORMULA.indd 1 21/07/2009 10.30.55
www.dienhathe.xyz
www.dienhathe.vn
2. 2
New SACE FORMULA.
Quality For You.
How simple and functional can a range of moulded-case circuit-breakers be? It
was answering this question, which would appear very elementary, that the idea for
a new family of circuit-breakers was conceived at ABB SACE. The result is SACE
FORMULA, the perfect synthesis between ABB SACE’s great quality and reliability
and all-round simplicity: installation, sizing and fitting with accessories.
SACE FORMULA is the expression of all ABB SACE’s long experience of several
decades in all its effectiveness: SACE FORMULA was born basic, but is able to
amaze with its extreme versatility of use.
brochure_FORMULA.indd 2 21/07/2009 10.30.59
www.dienhathe.xyz
www.dienhathe.vn
3. 3
The main strong points of the new moulded-case circuit-breakers are:
- just a few but essential versions of the circuit-breakers, easy to select and order;
- availability of circuit-breakers of all polarities, dedicated to the various
different applications;
- possibility of using the accessories most often requested;
- circuit-breaker depths even further reduced;
- a new installation system making assembly of the circuit-breakers easier.
SACE FORMULA. Simplicity and Quality in a Single Product.
brochure_FORMULA.indd 3 21/07/2009 10.31.02
www.dienhathe.xyz
www.dienhathe.vn
4. 4
New SACE FORMULA.
Simplicity for you.
The new SACE FORMULA family consists of three new A1,
A2 and A3 frames which reach up to 125A, 250A and 630A
respectively.
brochure_FORMULA.indd 4 21/07/2009 10.31.05
www.dienhathe.xyz
www.dienhathe.vn
5. 5
125A
250A
630A
A1/1p
A2/1p
A1/2p
A2/2p
A1/3p
A2/3p
A3/3p
A1/4p
A2/4p
A3/4p
The three frames are available in the fixed version, with front
terminals.
The protection trip unit has fixed thermal and magnetic
threshold values for putting the circuit-breaker into service
more rapidly. This way selection becomes simple and precise.
Just a few sales codes which simplify selection and make
ordering easier. Installation is also simplified, and thanks
to easy and rapid fixing operations and set-up, the circuit-
breaker is ready for use immediately.
SACE FORMULA. The Easy and Precise Choice.
brochure_FORMULA.indd 5 21/07/2009 10.31.14
www.dienhathe.xyz
www.dienhathe.vn
6. 6
New SACE FORMULA.
Great Versatility for You.
Quality is great versatility. As well as
proposing all three frames in the three-
pole and four-pole version, for the first
time ABB SACE proposes single-pole
and two-pole versions up to 250A,
opening the door to the most varied
application fields.
The single-pole and two-pole circuit-breakers are used in
applications with single-phase loads where high currents are
required, or in direct current systems where the short-circuit
currents to be interrupted are particularly high, for example in
the lighting, air conditioning and residential fields.
SACE FORMULA.
Winners in All Applications.
brochure_FORMULA.indd 6 21/07/2009 10.31.16
www.dienhathe.xyz
www.dienhathe.vn
7. 7
New SACE FORMULA.
Easy Installation System for You.
Quality is the rapid installation system.
With FORMULA Link, the simplicity of
the SACE FORMULA family shows up in
all its strength.
The connection between the supply side circuit-breaker and
FORMULA Link is made using special incoming connections kit,
whereas the connection between the load side circuit-breakers
and FORMULA Link is made using the outgoing connection kits.
Installation and putting into service are simple and rapid.
Three different frames of FORMULA Link are available:
SACE FORMULA.
Small Space, Great Quality.
- 250A FORMULA Link;
- 400A FORMULA Link;
- 630/800A FORMULA Link.
All the versions of the moulded-case circuit-breakers can be
installed in the FORMULA Link: SACE FORMULA A1 and A2 in
the single-pole, two-pole and three-pole versions, and SACE
FORMULA A3 in the three-pole version.
brochure_FORMULA.indd 7 21/07/2009 10.31.16
www.dienhathe.xyz
www.dienhathe.vn
8. 8
New SACE FORMULA.
Lowest depth for you.
Quality is compact overall dimensions.
The SACE FORMULA A1 and A2 depth
of just 60 mm is the lowest on the
market up to 250A. Simplicity is this,
too.
Reducing the dimensions without giving up anything on
performances and reliability further helps installation,
increasing the work space inside the switchboards.
Compactness of dimensions is a great advantage, especially
for OEMs, panel builders and installers.
SACE FORMULA.
Small Space, Great Quality.
brochure_FORMULA.indd 8 21/07/2009 10.31.26
www.dienhathe.xyz
www.dienhathe.vn
9. 9
New SACE FORMULA.
Standard Accessory Fitting for You.
The range of standardised accessories
up to 250A is simple but complete: from
the opening and undervoltage coils to
the auxiliary contacts, from the different
connection terminals to the rotary
handles, down to the different types of
key locks and padlocks.
And what to say about the snap-on fixing system for the
internal accessories? It is easy and fast to carry out. The
accessories are like the circuit-breakers: just a few sales
codes which simplify selection and make ordering easier.
SACE FORMULA.
Easy to Select
and even Easier to Order.
brochure_FORMULA.indd 9 21/07/2009 10.31.27
www.dienhathe.xyz
www.dienhathe.vn
10. 10
New SACE FORMULA.
Care of the Environment for You.
Quality is attention to the environment.
ABB SACE has always taken the
ecological footprint of its products into
account during each single stage of their
life: from production to disposal.
ABB SACE’s commitment in this direction is the reduction
in the dimensions of the circuit-breakers: apart from limiting
the use of raw materials during the initial construction stage,
the material which will have to be recycled in future is also
considerably less.
This is why the new SACE FORMULA moulded-case
circuit-breakers have been designed, developed and
produced in accordance with the International EPD system
(Environmental Product Declaration). A concrete example of
SACE FORMULA.
The Environment First
and Foremost.
brochure_FORMULA.indd 10 21/07/2009 10.31.30
www.dienhathe.xyz
www.dienhathe.vn