Ship unloading hoppers for grains, coal, minerals, biomass and other dry bulk products. Load trucks, conveyors, rail or other transport from any grab.
www.buttimerbulk.com
Specializing in mixing equipment for civil, environmental and paving contractors. At Rapid International, USA we strive to provide every client with the best experience when buying or renting our equipment. The specialized, fully self-contained and portable, continuous mixing plants support the industry in the following areas: Roller Compacted Concrete (RCC), Cement Treated Base (CTB), Cement Soil, and Contaminated Soil Stabilization (CSS). Our focus is to partner with our customers in order for them to deliver superior quality materials aligned with their specific needs and goals. We have the expertise, knowledge, machinery, tools, and industry connections to make your next job, and our ongoing relationship, a total success.
Ted Warren offers an example of RCC dam construction in his poster display featuring 7 projects he has been involved with.
he can be contacted at damted2000@yahoo.com for further information and assistance in providing RCC expertise
This document summarizes configurations for various TAKRAF IPCC systems and current installations. It describes several semi-mobile and fully mobile crushing plants supplied by TAKRAF to clients in Australia, Canada, Chile, Senegal and Kazakhstan. Specifics of the plants include crushers, conveyors, transfer points and material capacities. It also provides an overview of TAKRAF's history and portfolio of mining equipment and conveying solutions.
The document describes Loesche's Compact Cement Grinding (CCG) plant, a new small-scale cement production system. The CCG uses proven Loesche vertical roller mill technology in a compact modular form, allowing cement production in small and remote markets. Key advantages of the CCG include its flexibility to produce different cement types, ability to start production within a year, and potential to relocate the entire plant. Loesche offers full support services for the CCG from planning and installation to operation and maintenance.
This document provides information about Bulk Solids Handling company Saxlund. It discusses several of their bulk material handling machines and components including:
- Sliding Frame technology for discharging materials from flat bottom silos in a first-in, first-out manner at rates up to 130m3/hr.
- Push Floor technology for discharging non-free flowing materials from bunkers at rates up to 500m3/hr using reciprocating pusher frames.
- TubeFeeder technology for continuous reclaim of materials from bunkers and stockpiles at rates up to 400m3/hr using an open screw inside a perforated rotating tube.
- Hydraulic Rotor and other technologies
The document discusses the benefits of recycling crushing including preserving natural resources, reducing environmental impacts, and potential cost savings. Recycling crushing is becoming more common due to tighter regulations, higher dumping costs, and potential to use recycled materials in construction. Recycling crushing can be an economical option when transporting demolition waste long distances or in dense urban areas where space for dumping is limited. The document provides examples of materials that can be recycled through crushing like concrete, asphalt, bricks, and slag, and their potential end uses.
Tarmac has invested heavily in dry silo mortar production over the past two decades in response to growing demand. Their Cross Green facility in Leeds underwent a £9 million expansion from 2001-2003 to include a new dry silo mortar plant and high-output concrete plant. The dry silo mortar plant uses a fluidized bed dryer to remove moisture from sand before adding binders and pigments to produce dry mortar mixes in bulk. The expansion improved rail access and storage capacity to support efficient production and delivery of dry mortar, concrete, and other building materials to customers.
Specializing in mixing equipment for civil, environmental and paving contractors. At Rapid International, USA we strive to provide every client with the best experience when buying or renting our equipment. The specialized, fully self-contained and portable, continuous mixing plants support the industry in the following areas: Roller Compacted Concrete (RCC), Cement Treated Base (CTB), Cement Soil, and Contaminated Soil Stabilization (CSS). Our focus is to partner with our customers in order for them to deliver superior quality materials aligned with their specific needs and goals. We have the expertise, knowledge, machinery, tools, and industry connections to make your next job, and our ongoing relationship, a total success.
Ted Warren offers an example of RCC dam construction in his poster display featuring 7 projects he has been involved with.
he can be contacted at damted2000@yahoo.com for further information and assistance in providing RCC expertise
This document summarizes configurations for various TAKRAF IPCC systems and current installations. It describes several semi-mobile and fully mobile crushing plants supplied by TAKRAF to clients in Australia, Canada, Chile, Senegal and Kazakhstan. Specifics of the plants include crushers, conveyors, transfer points and material capacities. It also provides an overview of TAKRAF's history and portfolio of mining equipment and conveying solutions.
The document describes Loesche's Compact Cement Grinding (CCG) plant, a new small-scale cement production system. The CCG uses proven Loesche vertical roller mill technology in a compact modular form, allowing cement production in small and remote markets. Key advantages of the CCG include its flexibility to produce different cement types, ability to start production within a year, and potential to relocate the entire plant. Loesche offers full support services for the CCG from planning and installation to operation and maintenance.
This document provides information about Bulk Solids Handling company Saxlund. It discusses several of their bulk material handling machines and components including:
- Sliding Frame technology for discharging materials from flat bottom silos in a first-in, first-out manner at rates up to 130m3/hr.
- Push Floor technology for discharging non-free flowing materials from bunkers at rates up to 500m3/hr using reciprocating pusher frames.
- TubeFeeder technology for continuous reclaim of materials from bunkers and stockpiles at rates up to 400m3/hr using an open screw inside a perforated rotating tube.
- Hydraulic Rotor and other technologies
The document discusses the benefits of recycling crushing including preserving natural resources, reducing environmental impacts, and potential cost savings. Recycling crushing is becoming more common due to tighter regulations, higher dumping costs, and potential to use recycled materials in construction. Recycling crushing can be an economical option when transporting demolition waste long distances or in dense urban areas where space for dumping is limited. The document provides examples of materials that can be recycled through crushing like concrete, asphalt, bricks, and slag, and their potential end uses.
Tarmac has invested heavily in dry silo mortar production over the past two decades in response to growing demand. Their Cross Green facility in Leeds underwent a £9 million expansion from 2001-2003 to include a new dry silo mortar plant and high-output concrete plant. The dry silo mortar plant uses a fluidized bed dryer to remove moisture from sand before adding binders and pigments to produce dry mortar mixes in bulk. The expansion improved rail access and storage capacity to support efficient production and delivery of dry mortar, concrete, and other building materials to customers.
This document describes the key equipment used in bituminous road construction, including boilers, sprayers/distributors, hot mix plants, cold mix plants, dumpers, mechanical pavers/finishers, and rollers. Boilers are used to heat bitumen to a temperature where it can be easily applied. Sprayers/distributors are then used to apply the heated bitumen consistently across the specified area of the road. Hot mix plants mix aggregates, bitumen, and other materials to produce hot asphalt concrete, while cold mix plants perform the same function without heating. Dumpers transport construction materials like aggregates. Mechanical pavers/finishers apply and partially compact the asphalt concrete, while roll
Vertical Roller Grinding Mill has been used in the cement industry for 20 years and has replaced ball mills. It has advantages including improved grinding efficiency, ventilation drying ability, lower energy consumption, and combining breaking, grinding, drying, separating and conveying into one unit. Vertical Roller Grinding Mill is now dominant in the cement industry due to solving issues like wear part life, roller vibration, and reliability of hydraulic and lubrication systems through technological advances.
Every engineering structure and especially every bridge faces unavoidable constraints among those a limited weight admissible on the bridge deck which has to be respected during its lifetime. This constraint is then translated by a limited road thickness (without waterproofing) defined by the design of the structure since its conception. Depending on pathologies found during the life time of the structure (flow, excessive constraints…), the operator can also be
asked to search for limits of overloads including maintenance works of the road.
Ultratech RMC summer training covered concrete testing methods like slump test and bulk density test. The working of an RMC plant and concrete mix design were explained. Tests performed included sieve analysis, air entrainment, aggregate impact, moisture content, and flakiness. The working procedure and flow chart showed the process from storage of aggregates to pumping concrete on site. Design mix calculations followed IS and IRC standards to select water-cement ratio and determine cement and aggregate contents. Transportation of concrete over long distances and limited workability time were identified as challenges.
RoadstaB technology is an innovative technology from Russia in road construction for Highway bases, State road bases, Dirt road without protective layer, village roads without protective layer. This is the only available technology in India, which is meant for crucial climate, withstands in saturated conditions. Best part of this technology is that the base additive is in liquid form, facilitates to create a homogeneous mix with water.
The document summarizes a complex ground engineering project for the redevelopment of Crossrail's Paddington New Yard site adjacent to Paddington Station in London. Bachy Soletanche was contracted to install different pile types including 162 secant piles, 106 batching plant piles, 122 derailment piles, 77 low headroom piles, 74 SolThread piles, and 51 restricted access mini-piles. An innovative piling technique called SolThread was used, which requires less concrete and transport than conventional piles due to its threaded design. The SolThread piles increased capacity by 40% and formed the basis of facilities including a concrete plant, bus depot, and rail infrastructure at the site.
Ready mix concrete is concrete that is batched at a central plant and delivered in transit mixers, rather than being mixed on the construction site. The first ready mix concrete plant was established in the 1930s. Ready mix concrete production involves precise processes of storing and dosing cement, sand, gravel, and water before mixing in the plant and transporting in transit mixers. Transmixers are specially designed vehicles that transport fresh concrete without compromising its characteristics, and have carrying capacities ranging from 4 to 12 cubic meters. Order fulfillment for ready mix concrete is challenging due to the perishable nature of concrete and need to synchronize multiple truck deliveries according to traffic and site conditions.
COFCO Engineering & Technology (Zhengzhou) Co., Ltd., a leader in the #wheat_flour_milling industry, We understand every detail of the customer's needs. Providing with an optimized solutions and helping customers to achieve business success is the goal we pursue.
Contact us: www.cofcoge.com info@grainzdicn.com
Bétonpact® - Rapid setting, high performanceEurovia_Group
Betonpact is a roller-compacted concrete developed by Eurovia that can be used for industrial surfaces and roads. It uses conventional road construction equipment for manufacturing, transporting, and laying down a layer between 150-280mm thick. Betonpact offers high mechanical strength, rapid drying time allowing re-opening to traffic, freeze-thaw resistance, and can be used for heavy load areas like ports, factories, and high traffic roads.
Loesche Technology - Always a Step Ahead: Loesche Mills for Cement Raw MaterialLOESCHE
Cement raw material has been almost exclusively ground in roller mills (vertical air-swept grinding mills) since the second half of the 20th Century. Loesche was and is the pioneer of this technology. Hundreds of Loesche mills have been used in the cement industry across the world to the present day. They operate with two, three, four and six rollers.
Concrete Batching Plants are used for manufacturing high-quality concrete in a variety of construction applications, like buildings, roads, bridges, airports, and many others, and integrates materials storing, weighing, and mixing processes.
It is a machine that combines various ingredients like aggregates, sand, water, cement, and additives. These components are first weighed individually and then combined to prepared ready-mix concrete
The document discusses different types and uses of asphalt binders. It describes how asphalt binder is produced from petroleum crude oil through refining processes like solvent deasphalting and residuum oil supercritical extraction. These processes break down the crude oil into components that are blended to produce asphalt binders of desired properties. The asphalt binders are then used to manufacture hot mix asphalt for paving roads through batch and continuous mix drum plants. Other asphalt products discussed include cutback asphalts and emulsions, along with their compositions and uses.
This document provides an overview of equipment used for road construction, including: hydraulic excavators for digging and material handling; motor graders for creating smooth, flat surfaces; wheel loaders for loading and material handling; rollers and compactors for compacting soil and materials; and asphalt pavers for laying new asphalt surfaces. The document also defines what a road is and distinguishes between roads and streets. It emphasizes choosing the right equipment for each job in road construction to maximize productivity and efficiency.
Ready mix concrete is a pre-mixed concrete that is manufactured in a factory according to a set recipe or customer specifications. It is delivered to worksites by truck mixers or agitator trucks. Truck mixers mix the ingredients en route to the site, while agitator trucks only transport pre-mixed concrete without additional mixing. The benefits of ready mix concrete include speedy construction, lower labor costs, controlled water-cement ratios, and use in congested sites with limited space. However, longer transport times can impact concrete setting and additional traffic may be generated.
Dry Granulated BF Sand: A Groundbreaking and Sustainable InnovationLOESCHE
"Dry granulated BF sand: A groundbreaking and sustainable Innovation – Production process, product grinding and building materials investigations".
- Presentation by Thomas Fenzl, Primetal Technologies Austria, during the 14th Global Slag Conference, Exhibition & Awards.
26 - 27 March 2019, Aachen, Germany
vilas nikam - concrete technilogy A power point presentation on rmcNIKAMVN
This power point presentation summarizes the key aspects of ready mix concrete (RMC). It discusses the limitations of conventional concrete preparation methods that led to the development of RMC. The key components of an RMC plant include cement silos, aggregate batchers, water tanks, admixture tanks, crushing plants, conveyor belts, control rooms, generators, transit mixers, and testing laboratories. The RMC production process involves order receipt, mixing according to a design, transporting in transit mixers, testing, and delivery. RMC is used in congested worksites, underwater projects, roads, and high-rise buildings. Potential issues include plant equipment problems and traffic delays during transport. Advantages are efficient production and reduced
Cart-Away dry material concrete loaders are used to fill concrete mixing trailers. This manual is specifically for systems that use a touchscreen operating system to control the functions.
This batching system can load u cart, shortstop, concrete titan and other types of mixing trailers. The plan can also be used to load small ready mixed concrete trucks.
Cart-Away Auger Wet Concrete Batching System - 4 minute cycle loadingBruce A. Christensen
The auger style concrete loading systems are used mainly for pre-cast concrete companies. But many older U-cart locations still use the Cart-Away auger batching systems.
This document describes the key equipment used in bituminous road construction, including boilers, sprayers/distributors, hot mix plants, cold mix plants, dumpers, mechanical pavers/finishers, and rollers. Boilers are used to heat bitumen to a temperature where it can be easily applied. Sprayers/distributors are then used to apply the heated bitumen consistently across the specified area of the road. Hot mix plants mix aggregates, bitumen, and other materials to produce hot asphalt concrete, while cold mix plants perform the same function without heating. Dumpers transport construction materials like aggregates. Mechanical pavers/finishers apply and partially compact the asphalt concrete, while roll
Vertical Roller Grinding Mill has been used in the cement industry for 20 years and has replaced ball mills. It has advantages including improved grinding efficiency, ventilation drying ability, lower energy consumption, and combining breaking, grinding, drying, separating and conveying into one unit. Vertical Roller Grinding Mill is now dominant in the cement industry due to solving issues like wear part life, roller vibration, and reliability of hydraulic and lubrication systems through technological advances.
Every engineering structure and especially every bridge faces unavoidable constraints among those a limited weight admissible on the bridge deck which has to be respected during its lifetime. This constraint is then translated by a limited road thickness (without waterproofing) defined by the design of the structure since its conception. Depending on pathologies found during the life time of the structure (flow, excessive constraints…), the operator can also be
asked to search for limits of overloads including maintenance works of the road.
Ultratech RMC summer training covered concrete testing methods like slump test and bulk density test. The working of an RMC plant and concrete mix design were explained. Tests performed included sieve analysis, air entrainment, aggregate impact, moisture content, and flakiness. The working procedure and flow chart showed the process from storage of aggregates to pumping concrete on site. Design mix calculations followed IS and IRC standards to select water-cement ratio and determine cement and aggregate contents. Transportation of concrete over long distances and limited workability time were identified as challenges.
RoadstaB technology is an innovative technology from Russia in road construction for Highway bases, State road bases, Dirt road without protective layer, village roads without protective layer. This is the only available technology in India, which is meant for crucial climate, withstands in saturated conditions. Best part of this technology is that the base additive is in liquid form, facilitates to create a homogeneous mix with water.
The document summarizes a complex ground engineering project for the redevelopment of Crossrail's Paddington New Yard site adjacent to Paddington Station in London. Bachy Soletanche was contracted to install different pile types including 162 secant piles, 106 batching plant piles, 122 derailment piles, 77 low headroom piles, 74 SolThread piles, and 51 restricted access mini-piles. An innovative piling technique called SolThread was used, which requires less concrete and transport than conventional piles due to its threaded design. The SolThread piles increased capacity by 40% and formed the basis of facilities including a concrete plant, bus depot, and rail infrastructure at the site.
Ready mix concrete is concrete that is batched at a central plant and delivered in transit mixers, rather than being mixed on the construction site. The first ready mix concrete plant was established in the 1930s. Ready mix concrete production involves precise processes of storing and dosing cement, sand, gravel, and water before mixing in the plant and transporting in transit mixers. Transmixers are specially designed vehicles that transport fresh concrete without compromising its characteristics, and have carrying capacities ranging from 4 to 12 cubic meters. Order fulfillment for ready mix concrete is challenging due to the perishable nature of concrete and need to synchronize multiple truck deliveries according to traffic and site conditions.
COFCO Engineering & Technology (Zhengzhou) Co., Ltd., a leader in the #wheat_flour_milling industry, We understand every detail of the customer's needs. Providing with an optimized solutions and helping customers to achieve business success is the goal we pursue.
Contact us: www.cofcoge.com info@grainzdicn.com
Bétonpact® - Rapid setting, high performanceEurovia_Group
Betonpact is a roller-compacted concrete developed by Eurovia that can be used for industrial surfaces and roads. It uses conventional road construction equipment for manufacturing, transporting, and laying down a layer between 150-280mm thick. Betonpact offers high mechanical strength, rapid drying time allowing re-opening to traffic, freeze-thaw resistance, and can be used for heavy load areas like ports, factories, and high traffic roads.
Loesche Technology - Always a Step Ahead: Loesche Mills for Cement Raw MaterialLOESCHE
Cement raw material has been almost exclusively ground in roller mills (vertical air-swept grinding mills) since the second half of the 20th Century. Loesche was and is the pioneer of this technology. Hundreds of Loesche mills have been used in the cement industry across the world to the present day. They operate with two, three, four and six rollers.
Concrete Batching Plants are used for manufacturing high-quality concrete in a variety of construction applications, like buildings, roads, bridges, airports, and many others, and integrates materials storing, weighing, and mixing processes.
It is a machine that combines various ingredients like aggregates, sand, water, cement, and additives. These components are first weighed individually and then combined to prepared ready-mix concrete
The document discusses different types and uses of asphalt binders. It describes how asphalt binder is produced from petroleum crude oil through refining processes like solvent deasphalting and residuum oil supercritical extraction. These processes break down the crude oil into components that are blended to produce asphalt binders of desired properties. The asphalt binders are then used to manufacture hot mix asphalt for paving roads through batch and continuous mix drum plants. Other asphalt products discussed include cutback asphalts and emulsions, along with their compositions and uses.
This document provides an overview of equipment used for road construction, including: hydraulic excavators for digging and material handling; motor graders for creating smooth, flat surfaces; wheel loaders for loading and material handling; rollers and compactors for compacting soil and materials; and asphalt pavers for laying new asphalt surfaces. The document also defines what a road is and distinguishes between roads and streets. It emphasizes choosing the right equipment for each job in road construction to maximize productivity and efficiency.
Ready mix concrete is a pre-mixed concrete that is manufactured in a factory according to a set recipe or customer specifications. It is delivered to worksites by truck mixers or agitator trucks. Truck mixers mix the ingredients en route to the site, while agitator trucks only transport pre-mixed concrete without additional mixing. The benefits of ready mix concrete include speedy construction, lower labor costs, controlled water-cement ratios, and use in congested sites with limited space. However, longer transport times can impact concrete setting and additional traffic may be generated.
Dry Granulated BF Sand: A Groundbreaking and Sustainable InnovationLOESCHE
"Dry granulated BF sand: A groundbreaking and sustainable Innovation – Production process, product grinding and building materials investigations".
- Presentation by Thomas Fenzl, Primetal Technologies Austria, during the 14th Global Slag Conference, Exhibition & Awards.
26 - 27 March 2019, Aachen, Germany
vilas nikam - concrete technilogy A power point presentation on rmcNIKAMVN
This power point presentation summarizes the key aspects of ready mix concrete (RMC). It discusses the limitations of conventional concrete preparation methods that led to the development of RMC. The key components of an RMC plant include cement silos, aggregate batchers, water tanks, admixture tanks, crushing plants, conveyor belts, control rooms, generators, transit mixers, and testing laboratories. The RMC production process involves order receipt, mixing according to a design, transporting in transit mixers, testing, and delivery. RMC is used in congested worksites, underwater projects, roads, and high-rise buildings. Potential issues include plant equipment problems and traffic delays during transport. Advantages are efficient production and reduced
Cart-Away dry material concrete loaders are used to fill concrete mixing trailers. This manual is specifically for systems that use a touchscreen operating system to control the functions.
This batching system can load u cart, shortstop, concrete titan and other types of mixing trailers. The plan can also be used to load small ready mixed concrete trucks.
Cart-Away Auger Wet Concrete Batching System - 4 minute cycle loadingBruce A. Christensen
The auger style concrete loading systems are used mainly for pre-cast concrete companies. But many older U-cart locations still use the Cart-Away auger batching systems.
This document discusses bin and hopper design for solids processing. It addresses key questions in hopper design, including appropriate flow mode, hopper angle, outlet size, and discharge rate. The document outlines different hopper flow modes like mass flow, funnel flow and expanded flow. It also discusses potential problems with hoppers like ratholing, arching, inadequate flow and emptying. The document provides guidance on testing bulk solids properties, calculating hopper stresses, determining appropriate outlet size, and designing hoppers for mass flow.
The document provides information about ready-mix concrete (RMC), including:
1. It discusses the key raw materials used to produce RMC - aggregates (obtained from quarries), cement, fly ash, additives/admixtures, and water. Tests conducted on aggregates and their purposes are outlined.
2. Fly ash is described as a supplementary cementitious material (SCM) that contributes to hardened concrete properties through hydraulic or pozzolanic activity.
3. Additives are chemicals that can improve hardened concrete durability or reduce water content to shorten setting times.
4. The amount of water controls many fresh and hardened concrete properties like workability, strength, permeability, durability
This document discusses storage bins, silos, and hoppers used to store bulk solids. It covers various design considerations for hopper discharge including throttling material flow. Mass flow and core flow hoppers are described. Recommended proportions for hopper dimensions to store a given volume are provided. Caking issues and common causes of silo failure are also summarized. Different types of mechanical feeders used to regulate discharge from hoppers are introduced, including belt, apron, rotary table, and screw feeders. Pneumatic and vibrational methods for discharging material are briefly outlined.
Ready mix concrete is produced at a central batching plant and delivered to construction sites in agitator trucks. This allows for precise mixtures and reduces waste compared to on-site mixing. The key advantages are quality control, reduced labor costs, and faster construction. Some disadvantages include additional transportation costs and the possibility of contamination during delivery. The first ready mix concrete plant was established in Germany in 1903, and commercial delivery began in the United States in 1913. The industry has grown significantly since the 1960s to become widely used around the world today.
The document summarizes the layout and components of the Kota Super Thermal Power Station, a power plant located in Kota, India. It consists of 7 units with a total generation capacity of 1240 MW. The main parts of the plant include the coal handling plant, boiler, superheater, steam turbine, generator, generating transformer, and cooling system. The coal handling plant processes and conveys coal to the furnace. Steam is generated in the boiler and superheated before powering the steam turbine, which drives the generator to produce electricity.
Episode 39 : Hopper Design
Problem:
1 -experiments with shear box jenike on a particulate catalyst to give the family
yield locus as in 1. given that the bulk density is 1000 kg/m3 particulates and wall friction angle is 15
a-from design chart silo cone, do design a mass flow hopper for the material.
b-if the average size is 100 um, calculate the discharge flow rate passing through the discharge opening
2 - For the above materials using stainless steel is required to store 1000 tons of particulate in it. Coefficient of friction at the wall is given as 0.45 for each value and the formula that you use the appropriate justify the design.
a - draw the dimensions of the silo you and draw a vertical stress profile and the wall of the silo whole time say powerful particle
b- specify the maximum vertical stress and the wall of the silo you
c - if you use several different approaches in the design you provide appropriate recommendations to your employer for work before the end of the casting device fabrication started.
d - if problems such as the formation of the entrance are available after a certain time interval suggest measures - flow improvement measures to be taken to your employer
SAJJAD KHUDHUR ABBAS
Ceo , Founder & Head of SHacademy
Chemical Engineering , Al-Muthanna University, Iraq
Oil & Gas Safety and Health Professional – OSHACADEMY
Trainer of Trainers (TOT) - Canadian Center of Human
Development
Cement concrete mix design involves determining the proportions of cement, water, fine aggregate, and coarse aggregate to produce concrete with specified properties like strength, workability, and durability at lowest cost. The key factors influencing mix design include the required compressive strength, type and grade of cement, maximum size of coarse aggregates, grading of aggregates, water-cement ratio, workability, and durability. The water-cement ratio is especially important as it affects the strength, permeability, and workability of the hardened concrete.
Study: The Future of VR, AR and Self-Driving CarsLinkedIn
We asked LinkedIn members worldwide about their levels of interest in the latest wave of technology: whether they’re using wearables, and whether they intend to buy self-driving cars and VR headsets as they become available. We asked them too about their attitudes to technology and to the growing role of Artificial Intelligence (AI) in the devices that they use. The answers were fascinating – and in many cases, surprising.
This SlideShare explores the full results of this study, including detailed market-by-market breakdowns of intention levels for each technology – and how attitudes change with age, location and seniority level. If you’re marketing a tech brand – or planning to use VR and wearables to reach a professional audience – then these are insights you won’t want to miss.
Containment berms provide an easy way for facilities to meet EPA and SPCC regulations for containing potential spills of liquids such as fuel, oil, chemicals, and frac water. The berms are made of flexible materials and can be quickly unrolled and installed under equipment to contain any leaks or spills until cleanup. The document describes different types of containment berms like foam, L-bracket, and stanchion berms that provide containment capacities ranging from 110% to 7,500 gallons. It also lists compatible liquids and common applications like equipment installation, tank containment, and oil field jobs.
This document describes a transport solution for dozers and drilling machines between sites. The key features are its ability to transport heavy loads up to 120 tonnes at speeds up to 30 km/h, compact design allowing tight turns, and an advanced brake system for safe downhill travel. It has a hydraulic system to adjust the trailer bed angle and integrated controls to safely operate all functions from the cab.
The Hübner Group is an important supplier to the automotive and capital goods industries in Brazil. It operates foundries, machining facilities, and assembly plants located in Brazil. The company was founded in 1980 and has grown through acquisitions and continuous improvement projects. It focuses on supplying gray and ductile iron, aluminum, copper, and brass alloy parts. The Hübner Group prides itself on quality, technology, lean processes, and customer service to differentiate its manufacturing capabilities.
Archer's modular drilling rig (MDR) solution offers operational flexibility and cost efficiency unmatched in the modular offshore drilling rig market. The MDR package can be tailored for specific well requirements and provides an alternative to mobile offshore drilling units and traditional platform rigs. Archer currently owns and operates two MDR units, the Archer Emerald and Archer Topaz. The MDR utilizes an innovative modular design with a minimum crew of 16 and light module weights. Key features include a patented self-erecting mast system, 400 short ton pull capability, and efficient rig-up/down times.
The document provides information about AMECO Group, a company that designs, manufactures, and services bulk handling machines. It discusses their products such as reclaimers, stackers, shiploaders, and rotary scrapers. It also outlines their services including engineering, manufacturing, spare parts, maintenance, and training. The document emphasizes their custom designs, reliability, and focus on safety and customer experience.
This document provides information about Bulk Solids Handling company Saxlund. It discusses several of their bulk material handling machines and components including:
- Sliding Frames for discharging non-free flowing materials from silos in a first-in, first-out manner
- Push Floors for discharging materials from bunkers/silos through reciprocating pusher frames
- TubeFeeders for continuous reclaim of materials from bunkers/silos through a rotating perforated tube
- Hydraulic Rotors for creating mass flow discharge from circular silos
- Chain Conveyors and Screw Conveyors for transporting bulk materials within processing systems
- Solids Pumps for pumping
Ultra tech end user training 10 6-11-spillcontainment onlyMario Cruz
UltraTech International, Inc. provides spill containment, stormwater management, and environmental compliance products. They have over 400 products and 60 patents, developing approximately 20 new products per year. UltraTech entered the stormwater management market in 1997 and now has the largest product offering. Their products are used across many industries, including construction, mining, oil and gas, transportation, and more. Common applications include secondary containment, spill response, and meeting EPA regulations.
The Roy Hill Railway uses various technologies in its locomotives, ore cars, and track infrastructure to optimize operations and maintenance:
1) Locomotives use distributed power, remote control, and monitoring systems to increase efficiency and safety. Data is sent via WIMAX to experts for real-time diagnostics and problem-solving.
2) The communication-based signalling system uses in-cab displays, GPS, and electronic authorities to manage train movements.
3) Ore cars have auto-braking and low-friction bogies to improve performance. Wayside detectors monitor brake and wheel wear performance.
4) Track infrastructure utilizes rail profile, corrosion, and ground monitoring to maintain quality and predict
This document provides an overview of coal handling systems used in coal power plants. It discusses key components like stockpiles, stacker/reclaimers, belt feeders, conveyors, and the control systems used. Stockpiles provide surge capacity and are formed using stackers and reclaimed using reclaimers. Belt feeders carry coal from crushers to conveyors. Safety interlocks and procedures are described for operating components like feeders, conveyors, and stacker/reclaimers to handle coal safely and effectively throughout the coal handling process.
Program Development of Cement Industry at Jamshoro, SindhRana Ahtisham
Cement manufacturing Process. Details of Machinery, Production Rate. Case Study of Zeal Pak Cement Industry at Hyderabad, Sindh. Special zoninf for cement industry
Turning Grain Dust to Gold
Ann Crowley presented on solutions for weighing and automating processes in grain handling facilities. Belt scales, truck scales, railroad track scales, and overhead bins help weigh grain efficiently. Dust collection systems and "grain socks" control dust. Automated vehicle ticketing systems with traffic lights and printers improve traffic flow. Micro-ingredient balances precisely weigh small amounts. The TP-4200NT balance enables low-cost grain testing. Rice Lake provides global sales and support to optimize operations and turn grain dust into gold.
Dragline machine at dhudhichua project ,singrauliTauhid Mohammad
A dragline excavator is a piece of heavy equipment used in civil engineering and surface mining.
Draglines fall into two broad categories: those that are based on standard, lifting cranes, and the heavy units which have to be built on-site.
Design and fabrication_automatic_conveyor_pptDuraimuruganM27
This document describes the design and fabrication of an automatic conveyor system. The system uses an 8051 microcontroller and IR sensors to detect objects and avoid unnecessary motion of the conveyor. It is intended to reduce power consumption and prevent wasted motion. The conveyor uses a belt driven by pulleys and motors. Design calculations are shown for components like the motor, belt, and bearings. A cost estimate of 4000 rupees is provided. Literature on conveyor design improvements and applications is reviewed. The conclusion states that the automatic control can reduce consumption and wasted motion to increase equipment lifetime.
Blastechnik designs and manufactures blastrooms and industrial spray painting booths to increase production output while minimizing costs. They have a 20,000 square meter manufacturing facility in Johor, Malaysia and specialize in application-specific blastrooms for industries like shipbuilding, wind power, and automotive manufacturing. Their patented TruGlide floor allows for efficient abrasive recovery.
PowerLogistics Asia 2013- "Using HLV ships in Offshore Wind Farm Project Inst...PowerLift Events
Introduction to projects performed using HLV ships as transport & installation vessels in Offshore Wind Farm projects.
Introduction of new design concept of future deep-sea foundations for Offshore Wind Farm projects, installed by HLV ships.
The companies of Altra Industrial Motion offer many critical drivetrain products utilized in mine and quarry conveyor applications including complete braking and control systems, backstop and holdback clutches, gearing, couplings, and belted drives
J.S. Daniel paper for roads and bridges construction methods & resourcesJ.S. Daniel
The document discusses various types of roads, bridges, and construction methods. It describes different types of roads including highways, freeways, and motorways. It also discusses different types of junctions like interchanges, intersections, flyovers, and underpasses. The document then describes the typical structure of a road including components like the platform, shoulder, median strip, carriageway, and ditch. It also discusses road profiles, materials used in construction, and road furniture. Finally, it provides information on bridge types, construction methods, and a sample schedule for a typical bridge construction project.
CoreMet is a newly established mineral processing company with over 20 years of experience in metallurgical testing, plant optimization, and modular plant design, construction, and operation. The company offers consulting services, metallurgical test work, modular processing plants, plant optimization, and a focus on dry processing, fines processing, and zero effluent technologies based on their technical experience and capabilities.
This presentation constitutes an integral component of a designated course curriculum and is crafted and disseminated for its intended audience. None of the contents within this presentation should be construed as a formal publication on the subject matter. The author has extensively referenced published resources in the preparation of this presentation, and proper citations will be provided in the bibliography upon completion of its development.
The Manitowoc Company held a press briefing on April 11, 2016 to introduce several new cranes and crane models. The briefing highlighted new mobile cranes including the Grove GMK5150L/5150, GMK4100L-1, and GMK5250L. New rough-terrain cranes, the Grove GRT8100 and GRT880, were also introduced. For tower cranes, the briefing featured the new Potain self-erecting HUP 32-27 crane family and updates to the MDT and City crane lines, including the MDT389 and MDT219. A new CabLIFT system was also announced for improving operator access and safety on tower
RPWORLD offers custom injection molding service to help customers develop products ramping up from prototypeing to end-use production. We can deliver your on-demand parts in as fast as 7 days.
Rethinking Kållered │ From Big Box to a Reuse Hub: A Transformation Journey ...SirmaDuztepeliler
"Rethinking Kållered │ From Big Box to a Reuse Hub: A Transformation Journey Toward Sustainability"
The booklet of my master’s thesis at the Department of Architecture and Civil Engineering at Chalmers University of Technology. (Gothenburg, Sweden)
This thesis explores the transformation of the vacated (2023) IKEA store in Kållered, Sweden, into a "Reuse Hub" addressing various user types. The project aims to create a model for circular and sustainable economic practices that promote resource efficiency, waste reduction, and a shift in societal overconsumption patterns.
Reuse, though crucial in the circular economy, is one of the least studied areas. Most materials with reuse potential, especially in the construction sector, are recycled (downcycled), causing a greater loss of resources and energy. My project addresses barriers to reuse, such as difficult access to materials, storage, and logistics issues.
Aims:
• Enhancing Access to Reclaimed Materials: Creating a hub for reclaimed construction materials for both institutional and individual needs.
• Promoting Circular Economy: Showcasing the potential and variety of reusable materials and how they can drive a circular economy.
• Fostering Community Engagement: Developing spaces for social interaction around reuse-focused stores and workshops.
• Raising Awareness: Transforming a former consumerist symbol into a center for circular practices.
Highlights:
• The project emphasizes cross-sector collaboration with producers and wholesalers to repurpose surplus materials before they enter the recycling phase.
• This project can serve as a prototype for reusing many idle commercial buildings in different scales and sizes.
• The findings indicate that transforming large vacant properties can support sustainable practices and present an economically attractive business model with high social returns at the same time.
• It highlights the potential of how sustainable practices in the construction sector can drive societal change.
Best Digital Marketing Strategy Build Your Online Presence 2024.pptxpavankumarpayexelsol
This presentation provides a comprehensive guide to the best digital marketing strategies for 2024, focusing on enhancing your online presence. Key topics include understanding and targeting your audience, building a user-friendly and mobile-responsive website, leveraging the power of social media platforms, optimizing content for search engines, and using email marketing to foster direct engagement. By adopting these strategies, you can increase brand visibility, drive traffic, generate leads, and ultimately boost sales, ensuring your business thrives in the competitive digital landscape.
3. Standard
Models
Model Grab size Dimensions(All in Meters)
A B C D*
ML - 6 1-10 m3 6 2.4 8 5.5
ML - 7 8-20 m3 7 2.9 9.4 6.1
ML - 8 15-28 m3 8 3.2 10.4 6.1
ML - 9 22-40 m3 9 3.4 11.3 6.1
* Based on discharge to trucks and train wagons,
but this dimension is determined by client and
discharge option.
8. Case Studies:
Port of Cork
DML
• To fit Grab size 30m3
• Full Dust Aspiration with Flex Flap
System under Grid & dust Aspiration
• Discharge 700 TPH through two lorry
loading spouts.
9. Case Studies:
Port of Dublin
RML
• Full Dust Aspiration
from Thimble and
two outlet spouts.
• Discharge:
- 500 TPH to two Lorry
Loading Spouts.
- 225 TPH Discharge
onto Port Conveyor.
• Mode of Travel: Unit
is towed by Liebherr
Crane on Rail.
10. Case Studies:
Bunge, Poland
SML
• Ship Unloading Capacity of 800 TPH of
soybean cake
• Dust containment & Retention Systems
• Integration with 50,000 Ton Storage
capacity, Rail & Truck Loading
12. Why Buttimer?
• 30+ years of Bulk
Handling industry
experience
• International presence
• Highly skilled in-house
design team
• In-house fabrication
• Customer development
focused: long-term
orientation