Burns#1
•
1 like•463 views
This document discusses different types of burns, including first, second, and third degree burns. It explains that first degree burns only affect the outer layers of skin and cause redness, while second degree burns go deeper and cause blistering. Third degree burns penetrate all layers of skin and damage tissues below. The document provides guidance on first aid for burns, including immediate cooling of the affected area with water and loosely wrapping burns to prevent infection until medical help arrives. Chemical burns specifically require flushing with water for at least 20 minutes.
Report
Share
Report
Share
Download to read offline
Recommended
First ai d 4 burn
This document provides information on first aid for burn injuries. It describes the causes and degrees of burns, as well as how to assess the severity. For minor burns, it recommends cooling the affected area with water or other cold liquids for 10 minutes. For more severe burns, it says to protect the burned area and seek immediate medical help. First aid involves removing constricting clothing and jewelry near the burn, cleaning and dressing the wound but not applying any creams or ointments. Special precautions are outlined for burns in the mouth, eyes, and those caused by electricity.
Burns; Types, Management, Treatment and Causes
In this presentation, i talked about different types of burns, how to deal with each, and medicines available on the market for treatment of burns.
Also i talked about chemical burns that are caused by households present in every house.
New Microsoft PowerPoint Presentation
This document provides information on classifying and treating different types of burns. It describes:
1) Four degrees of burns from first to fourth based on depth of skin damage. First degree burns only affect the outer layer while fourth degree burns damage bones and tendons.
2) Causes of different types of burns including thermal, electrical, chemical, and radiation.
3) First aid steps for chemical burns which is to remove the chemical, rinse the area, loosely bandage it, and take over-the-counter pain relievers. For electrical burns, the steps are to not touch the electrified person, turn off the power source if possible, and remove the person safely using a dry object.
Treatment for burns
The document summarizes the three degrees of burns - first, second, and third - and provides treatment guidelines. First-degree burns only affect the outer layer of skin and can be treated with cooling and bandaging. Second-degree burns go deeper and cause blistering; minor cases can also be treated with cooling and bandaging but larger or more sensitive areas require medical attention. Third-degree burns are the most severe, affecting all layers of skin and possibly deeper tissues; they require emergency medical treatment and care to prevent shock.
Burn injury
This document discusses burn injuries, including the different degrees of burns and treatment for minor burns. First-degree burns affect only the outer layer of skin, while second-degree burns affect both the outer and underlying skin layers and cause blistering. Third-degree burns extend deeper and cause charred skin. Treatment for minor burns includes cooling the burn with cool water for 10-15 minutes, covering it with a sterile bandage, and taking over-the-counter pain relievers. Ice or home remedies should not be applied directly to burns.
Burn burn to human body
BURN BURN BURN
in this ppt you can find all the detail related to burn of human body
causes of burning
types of burning
classification of burning
symptoms to identify the degree of burn
prevention of burn
home made prevention for burning
Burns
Burns are injuries to the skin caused by heat, electricity, chemicals, light or friction. They can range from minor first degree burns involving only the outer layer of skin to more severe third degree burns destroying both the outer and inner layers of skin. Treatment depends on the severity of the burn but may include cooling the burn, applying antibiotic ointment, wrapping it to prevent infection, and for more serious burns, fluid replacement, skin grafts or other procedures in a hospital setting. Complications can include shock, infection, organ dysfunction and respiratory distress if not properly treated.
First Aid for Burns,Electric shocks,broken arms, drowning..........etc By Hos...
first aid for difference situation for any moments. First Aid for Burns,Electric shocks,broken arms, drowning
Recommended
First ai d 4 burn
This document provides information on first aid for burn injuries. It describes the causes and degrees of burns, as well as how to assess the severity. For minor burns, it recommends cooling the affected area with water or other cold liquids for 10 minutes. For more severe burns, it says to protect the burned area and seek immediate medical help. First aid involves removing constricting clothing and jewelry near the burn, cleaning and dressing the wound but not applying any creams or ointments. Special precautions are outlined for burns in the mouth, eyes, and those caused by electricity.
Burns; Types, Management, Treatment and Causes
In this presentation, i talked about different types of burns, how to deal with each, and medicines available on the market for treatment of burns.
Also i talked about chemical burns that are caused by households present in every house.
New Microsoft PowerPoint Presentation
This document provides information on classifying and treating different types of burns. It describes:
1) Four degrees of burns from first to fourth based on depth of skin damage. First degree burns only affect the outer layer while fourth degree burns damage bones and tendons.
2) Causes of different types of burns including thermal, electrical, chemical, and radiation.
3) First aid steps for chemical burns which is to remove the chemical, rinse the area, loosely bandage it, and take over-the-counter pain relievers. For electrical burns, the steps are to not touch the electrified person, turn off the power source if possible, and remove the person safely using a dry object.
Treatment for burns
The document summarizes the three degrees of burns - first, second, and third - and provides treatment guidelines. First-degree burns only affect the outer layer of skin and can be treated with cooling and bandaging. Second-degree burns go deeper and cause blistering; minor cases can also be treated with cooling and bandaging but larger or more sensitive areas require medical attention. Third-degree burns are the most severe, affecting all layers of skin and possibly deeper tissues; they require emergency medical treatment and care to prevent shock.
Burn injury
This document discusses burn injuries, including the different degrees of burns and treatment for minor burns. First-degree burns affect only the outer layer of skin, while second-degree burns affect both the outer and underlying skin layers and cause blistering. Third-degree burns extend deeper and cause charred skin. Treatment for minor burns includes cooling the burn with cool water for 10-15 minutes, covering it with a sterile bandage, and taking over-the-counter pain relievers. Ice or home remedies should not be applied directly to burns.
Burn burn to human body
BURN BURN BURN
in this ppt you can find all the detail related to burn of human body
causes of burning
types of burning
classification of burning
symptoms to identify the degree of burn
prevention of burn
home made prevention for burning
Burns
Burns are injuries to the skin caused by heat, electricity, chemicals, light or friction. They can range from minor first degree burns involving only the outer layer of skin to more severe third degree burns destroying both the outer and inner layers of skin. Treatment depends on the severity of the burn but may include cooling the burn, applying antibiotic ointment, wrapping it to prevent infection, and for more serious burns, fluid replacement, skin grafts or other procedures in a hospital setting. Complications can include shock, infection, organ dysfunction and respiratory distress if not properly treated.
First Aid for Burns,Electric shocks,broken arms, drowning..........etc By Hos...
first aid for difference situation for any moments. First Aid for Burns,Electric shocks,broken arms, drowning
Burns and scalds
This document provides guidance on first aid management for different types of burns and scalds. It describes burns as injuries caused by dry heat and scalds as injuries from moist heat. It classifies burns based on the rule of 9 and depth, and provides instructions for cooling and dressing minor burns. For more severe burns, it advises calling emergency services and treating for shock. Specific guidance is given for helping someone whose clothes are on fire, and managing electrical, chemical, and radiation burns.
What is burn and scalds
Burns and scalds are injuries caused by heat from hot liquids, surfaces, or vapors. They range from minor first-degree burns affecting just the outer skin layer to severe third-degree burns penetrating all skin layers. Treatment depends on burn severity but generally involves cooling the burn, applying antibiotic ointment or sterile dressings, and taking pain medication. More serious burns require medical care to prevent infection and promote proper healing. Sunburn is also a type of burn caused by overexposure to UV rays from the sun and should be treated by hydrating skin and protecting it from further sun exposure.
Burn Safety Training
1. Burns are classified based on the depth of skin damage as superficial, superficial partial-thickness, deep partial-thickness, or full-thickness. 2. Treatment for burns includes cooling the burned area, cleaning with soap and water, and applying antibiotic ointment before dressing. 3. Special considerations depend on the type of burn, such as removing wet clothing for scalds, extinguishing flames, and ensuring safety when treating electrical burns.
Burns And Scalds
Burns and scalds can be caused by either dry heat from fire, hot objects, or electricity which cause burns, or wet heat from hot liquids, steam which cause scalds. Signs include redness, swelling, blisters and charred skin. If someone has a burn or scald, remove any jewellery, apply a sterile dressing or cling film, treat for shock if needed, and seek medical help if serious. Minor burns should be cooled under cold running water for at least 10 minutes.
Burn first aid ppt
1. The document discusses different types and classifications of burns including first, second, and third degree burns.
2. First degree burns affect the outer layer of skin and cause redness and pain but usually heal within 6 days without scarring. Second degree burns involve deeper layers of skin and cause blistering, taking 2-4 weeks to heal and possibly resulting in slight scarring.
3. Third degree burns are the most severe, affecting all layers of skin and sometimes underlying tissues, appearing charred or white. They take extensive time to heal, often with permanent scarring or requiring skin grafts.
Thermal Burns
Thermal burns are common injuries that can range from mild sunburns to severe burns affecting deep skin and tissue layers. They are caused by hot objects, flames, scalds, and radiation. Treatment depends on the severity and depth of the burn, ranging from self-care measures like cooling and pain relief at home, to medical care including cleaning, debriding blisters, intravenous fluids, and even specialized burn center care for very serious burns. Preventive efforts can help reduce the many burn injuries that occur each year.
Is skin peeling dangerous
Your skin is regularly exposed to several environmental elements that can irritate and damage it. Few causes of skin peeling are dry skin, sun burn, skin allergies and infection, skin rashes, ringworm and so on. Skin peeling can be caused due to several major and minor factors.
Burns
The document discusses the classification and treatment of burns. It describes the three layers of skin and classifies burns as first, second, or third degree based on the depth of damage. First degree burns only damage the outer epidermis, while second degree burns pass through the epidermis into the dermis. Third degree burns extend through all layers of skin and into fat, muscle or bone. Treatment depends on the severity and size of the burn, with minor first and second degree burns treated at home through cooling, covering and pain relief, while more severe burns require immediate medical attention.
Burns
There are three types of burns that vary in severity: first, second, and third-degree. First-degree burns only affect the outer layer of skin and cause redness, swelling, and peeling. Second-degree burns are more serious as they extend below the top layer and cause blistering. Third-degree burns are the most severe, damaging all layers of skin and potentially causing nerve damage resulting in an absence of pain. Understanding the different types is important for determining appropriate treatment.
Module5 - Emergency Preparation & Basic First Aid
The document provides information on emergency preparation and first aid for burns. It outlines an emergency action plan including contacting 911 for all fire alarms, establishing evacuation routes by closing doors and using stairwells only. It also describes classifying and treating burns, from minor first degree burns to more serious second and third degree burns which require immediate medical attention.
Burns and its types management
seminar presentation on burns its introduction definition causes and risk factors of burn types of burn classification pathophysiology symptoms complications and diagnostic evaluation
Chapter 3 presentation
The integumentary system consists of the skin, nails, and hair. It protects the body and helps regulate temperature. Specialists who treat conditions of the skin are called dermatologists. Dermatitis is skin inflammation that causes redness and itching. Melanoma is the most dangerous type of skin cancer. Protecting skin from sunlight can prevent damage and disease.
Clinical methods & therapeutics
The document discusses various types of skin conditions including urticaria (hives), skin cracks, burns, and their causes, symptoms, classifications, complications, treatments, and prevention methods. It defines urticaria as raised, itchy bumps on the skin caused by allergens or unknown reasons. Skin cracks are caused by dry, damaged skin that can become infected. Burns are classified by degree of damage (first to fourth) and treated based on severity. The document provides details on diagnosing and managing different skin diseases and injuries.
Can Pets Get Sunburned
This slide is very helpful in terms of providing some valuable information regarding the impact of UV rays through sunlight. It is a fact that like Human, Dog also suffers from skin cancer due to the heavy sunlight. Because UV rays or Cosmic rays present in sunlight do the same. Take a look at this slide and also get know how much you have to be careful and what are the steps you should follow to take the proper care of your Pets.
Burn(dry heat)
This document defines dry heat burns and their local effects. It describes how dry heat such as flames, explosions or radiant heat can cause burns through direct conduction or radiation. The severity of burns depends on factors like temperature and duration of exposure. Burns are classified based on depth, with first degree being erythema and sixth degree being complete charring. They are also classified based on surface area of the body affected. More severe burns impacting larger surface areas can result in fluid loss, shock and even death.
2. burn
Burns are caused by heat, chemicals, electricity, sunlight or radiation and can range in severity from superficial first-degree burns affecting only the outer layer of skin, to third-degree burns destroying the deepest skin layers and tissues. Common causes of burns include scalds, fires, and flammable liquids and gases. Treatment depends on the degree of burn, with first-degree burns typically treated with cooling and pain relief, while more severe second and third-degree burns may require cleaning, antibiotics, bandaging and even surgery to prevent infection and promote healing. The best approach is to prevent burns by taking safety precautions around sources of heat, chemicals, electricity and fire in both work and home environments.
Burns
First, second, and third degree burns are classified based on the depth of skin damage. A first degree burn damages the outer layer of skin, while a second degree burn extends deeper to damage the layer below. The most severe, a third degree burn, destroys the deepest skin tissues. Different types of burns include flame, scald, inhalation, electrical, lightening, and chemical burns. Signs and symptoms range from pain, blistering, and redness to life-threatening shock. Primary management of burns involves removing the casualty from danger, cooling the burn with water, covering with sterile dressing, and treating for shock as needed.
First aid mx on burn injury
The document provides information on classifying and treating different types of burn injuries. It describes first, second, and third-degree burns based on the depth of skin damage. First-degree burns only affect the outer layer of skin, while second-degree burns extend deeper into the dermis. Third-degree burns are the most severe, damaging all layers of skin. For minor first and second-degree burns covering less than 3 inches, the recommended treatment is to cool the burn with water, cover it loosely with a sterile bandage, and take an over-the-counter pain reliever. More severe burns require immediate emergency medical attention.
Burns
Burns are injuries that damage skin cells and are caused by flames, hot objects, liquids, chemicals, or radiation. Burns are classified as superficial/first degree, partial thickness/second degree, or full thickness/third degree based on the depth of skin damage. Major burns that affect large portions of the body or special areas like the face, hands, or respiratory system are medical emergencies requiring prompt treatment. The first aid for burns involves cooling the area with running water for 20 minutes and seeking immediate medical help for severe burns.
Burns - Assessment and Management
This document provides information on burns, including causes, assessment, treatment and prevention. Burns are injuries caused by heat, chemicals, electricity or radiation. Assessment involves checking the airway, breathing, circulation, disability and exposure. Treatment depends on the severity and depth of the burn, and may include cleaning, dressing and fluid replacement. Deeper burns require specialist care. Prevention strategies include smoke alarms, fire safety education, and safe cooking and electrical practices.
BURNS NEW PPT.pptx
The document discusses burns and scalds, describing them as injuries caused to the skin by heat. It defines different types of burns, including superficial burns affecting just the epidermis and deep burns affecting the epidermis and dermis. Various causes of burns are outlined, including dry heat, electricity, chemicals, radiation, and wet heat or scalds. The extent of burns is also explained using the "rule of nines" where the body is divided into sections accounting for 9% or 18% depending on the area. Signs and symptoms of burns include pain, blistering, swelling and decreased urine output. First aid treatment focuses on reducing heat and preventing infection by cleaning and dressing the wound. More severe burns requiring medical attention
Trauma - Burn Injuries
Download more free first aid PowerPoint presentations here: https://www.firstaidpowerpoint.org
Free Online First Aid Course: https://www.firstaidforfree.com
More Related Content
What's hot
Burns and scalds
This document provides guidance on first aid management for different types of burns and scalds. It describes burns as injuries caused by dry heat and scalds as injuries from moist heat. It classifies burns based on the rule of 9 and depth, and provides instructions for cooling and dressing minor burns. For more severe burns, it advises calling emergency services and treating for shock. Specific guidance is given for helping someone whose clothes are on fire, and managing electrical, chemical, and radiation burns.
What is burn and scalds
Burns and scalds are injuries caused by heat from hot liquids, surfaces, or vapors. They range from minor first-degree burns affecting just the outer skin layer to severe third-degree burns penetrating all skin layers. Treatment depends on burn severity but generally involves cooling the burn, applying antibiotic ointment or sterile dressings, and taking pain medication. More serious burns require medical care to prevent infection and promote proper healing. Sunburn is also a type of burn caused by overexposure to UV rays from the sun and should be treated by hydrating skin and protecting it from further sun exposure.
Burn Safety Training
1. Burns are classified based on the depth of skin damage as superficial, superficial partial-thickness, deep partial-thickness, or full-thickness. 2. Treatment for burns includes cooling the burned area, cleaning with soap and water, and applying antibiotic ointment before dressing. 3. Special considerations depend on the type of burn, such as removing wet clothing for scalds, extinguishing flames, and ensuring safety when treating electrical burns.
Burns And Scalds
Burns and scalds can be caused by either dry heat from fire, hot objects, or electricity which cause burns, or wet heat from hot liquids, steam which cause scalds. Signs include redness, swelling, blisters and charred skin. If someone has a burn or scald, remove any jewellery, apply a sterile dressing or cling film, treat for shock if needed, and seek medical help if serious. Minor burns should be cooled under cold running water for at least 10 minutes.
Burn first aid ppt
1. The document discusses different types and classifications of burns including first, second, and third degree burns.
2. First degree burns affect the outer layer of skin and cause redness and pain but usually heal within 6 days without scarring. Second degree burns involve deeper layers of skin and cause blistering, taking 2-4 weeks to heal and possibly resulting in slight scarring.
3. Third degree burns are the most severe, affecting all layers of skin and sometimes underlying tissues, appearing charred or white. They take extensive time to heal, often with permanent scarring or requiring skin grafts.
Thermal Burns
Thermal burns are common injuries that can range from mild sunburns to severe burns affecting deep skin and tissue layers. They are caused by hot objects, flames, scalds, and radiation. Treatment depends on the severity and depth of the burn, ranging from self-care measures like cooling and pain relief at home, to medical care including cleaning, debriding blisters, intravenous fluids, and even specialized burn center care for very serious burns. Preventive efforts can help reduce the many burn injuries that occur each year.
Is skin peeling dangerous
Your skin is regularly exposed to several environmental elements that can irritate and damage it. Few causes of skin peeling are dry skin, sun burn, skin allergies and infection, skin rashes, ringworm and so on. Skin peeling can be caused due to several major and minor factors.
Burns
The document discusses the classification and treatment of burns. It describes the three layers of skin and classifies burns as first, second, or third degree based on the depth of damage. First degree burns only damage the outer epidermis, while second degree burns pass through the epidermis into the dermis. Third degree burns extend through all layers of skin and into fat, muscle or bone. Treatment depends on the severity and size of the burn, with minor first and second degree burns treated at home through cooling, covering and pain relief, while more severe burns require immediate medical attention.
Burns
There are three types of burns that vary in severity: first, second, and third-degree. First-degree burns only affect the outer layer of skin and cause redness, swelling, and peeling. Second-degree burns are more serious as they extend below the top layer and cause blistering. Third-degree burns are the most severe, damaging all layers of skin and potentially causing nerve damage resulting in an absence of pain. Understanding the different types is important for determining appropriate treatment.
Module5 - Emergency Preparation & Basic First Aid
The document provides information on emergency preparation and first aid for burns. It outlines an emergency action plan including contacting 911 for all fire alarms, establishing evacuation routes by closing doors and using stairwells only. It also describes classifying and treating burns, from minor first degree burns to more serious second and third degree burns which require immediate medical attention.
Burns and its types management
seminar presentation on burns its introduction definition causes and risk factors of burn types of burn classification pathophysiology symptoms complications and diagnostic evaluation
Chapter 3 presentation
The integumentary system consists of the skin, nails, and hair. It protects the body and helps regulate temperature. Specialists who treat conditions of the skin are called dermatologists. Dermatitis is skin inflammation that causes redness and itching. Melanoma is the most dangerous type of skin cancer. Protecting skin from sunlight can prevent damage and disease.
Clinical methods & therapeutics
The document discusses various types of skin conditions including urticaria (hives), skin cracks, burns, and their causes, symptoms, classifications, complications, treatments, and prevention methods. It defines urticaria as raised, itchy bumps on the skin caused by allergens or unknown reasons. Skin cracks are caused by dry, damaged skin that can become infected. Burns are classified by degree of damage (first to fourth) and treated based on severity. The document provides details on diagnosing and managing different skin diseases and injuries.
Can Pets Get Sunburned
This slide is very helpful in terms of providing some valuable information regarding the impact of UV rays through sunlight. It is a fact that like Human, Dog also suffers from skin cancer due to the heavy sunlight. Because UV rays or Cosmic rays present in sunlight do the same. Take a look at this slide and also get know how much you have to be careful and what are the steps you should follow to take the proper care of your Pets.
Burn(dry heat)
This document defines dry heat burns and their local effects. It describes how dry heat such as flames, explosions or radiant heat can cause burns through direct conduction or radiation. The severity of burns depends on factors like temperature and duration of exposure. Burns are classified based on depth, with first degree being erythema and sixth degree being complete charring. They are also classified based on surface area of the body affected. More severe burns impacting larger surface areas can result in fluid loss, shock and even death.
What's hot (15)
Similar to Burns#1
2. burn
Burns are caused by heat, chemicals, electricity, sunlight or radiation and can range in severity from superficial first-degree burns affecting only the outer layer of skin, to third-degree burns destroying the deepest skin layers and tissues. Common causes of burns include scalds, fires, and flammable liquids and gases. Treatment depends on the degree of burn, with first-degree burns typically treated with cooling and pain relief, while more severe second and third-degree burns may require cleaning, antibiotics, bandaging and even surgery to prevent infection and promote healing. The best approach is to prevent burns by taking safety precautions around sources of heat, chemicals, electricity and fire in both work and home environments.
Burns
First, second, and third degree burns are classified based on the depth of skin damage. A first degree burn damages the outer layer of skin, while a second degree burn extends deeper to damage the layer below. The most severe, a third degree burn, destroys the deepest skin tissues. Different types of burns include flame, scald, inhalation, electrical, lightening, and chemical burns. Signs and symptoms range from pain, blistering, and redness to life-threatening shock. Primary management of burns involves removing the casualty from danger, cooling the burn with water, covering with sterile dressing, and treating for shock as needed.
First aid mx on burn injury
The document provides information on classifying and treating different types of burn injuries. It describes first, second, and third-degree burns based on the depth of skin damage. First-degree burns only affect the outer layer of skin, while second-degree burns extend deeper into the dermis. Third-degree burns are the most severe, damaging all layers of skin. For minor first and second-degree burns covering less than 3 inches, the recommended treatment is to cool the burn with water, cover it loosely with a sterile bandage, and take an over-the-counter pain reliever. More severe burns require immediate emergency medical attention.
Burns
Burns are injuries that damage skin cells and are caused by flames, hot objects, liquids, chemicals, or radiation. Burns are classified as superficial/first degree, partial thickness/second degree, or full thickness/third degree based on the depth of skin damage. Major burns that affect large portions of the body or special areas like the face, hands, or respiratory system are medical emergencies requiring prompt treatment. The first aid for burns involves cooling the area with running water for 20 minutes and seeking immediate medical help for severe burns.
Burns - Assessment and Management
This document provides information on burns, including causes, assessment, treatment and prevention. Burns are injuries caused by heat, chemicals, electricity or radiation. Assessment involves checking the airway, breathing, circulation, disability and exposure. Treatment depends on the severity and depth of the burn, and may include cleaning, dressing and fluid replacement. Deeper burns require specialist care. Prevention strategies include smoke alarms, fire safety education, and safe cooking and electrical practices.
BURNS NEW PPT.pptx
The document discusses burns and scalds, describing them as injuries caused to the skin by heat. It defines different types of burns, including superficial burns affecting just the epidermis and deep burns affecting the epidermis and dermis. Various causes of burns are outlined, including dry heat, electricity, chemicals, radiation, and wet heat or scalds. The extent of burns is also explained using the "rule of nines" where the body is divided into sections accounting for 9% or 18% depending on the area. Signs and symptoms of burns include pain, blistering, swelling and decreased urine output. First aid treatment focuses on reducing heat and preventing infection by cleaning and dressing the wound. More severe burns requiring medical attention
Trauma - Burn Injuries
Download more free first aid PowerPoint presentations here: https://www.firstaidpowerpoint.org
Free Online First Aid Course: https://www.firstaidforfree.com
About Burns And it`s Managements
This document provides information about different types of burns, including classification, causes, symptoms, and treatment. It discusses first, second, and third-degree burns. It also describes different kinds of burns such as scald burns, flame burns, chemical burns, electrical burns, and radiation burns. The document emphasizes the importance of first aid treatment for burns, including cooling the affected area, applying antibiotic ointment, and seeking immediate medical help for serious burns.
Burn
First degree burns affect only the epidermis and cause redness, dryness, and mild pain. Second degree burns affect both the epidermis and portions of the dermis, causing severe pain, blistering, and healing within 7-14 days. Third degree burns affect both skin layers and may be painless, appearing white, brown or red and healing slowly. For first aid, flush burns with cool water, apply moisturizer and pain relief, and seek medical help for large or worsening burns. Proper burn treatment focuses on cooling the skin and preventing infection.
Burns and freezing
This document discusses burns and frostbite, including:
1) It defines burns as damaged tissue caused by heat, chemicals, electricity, sunlight, or radiation and describes first, second, and third degree burns.
2) It provides first aid instructions for heat burns, chemical burns, and electrical burns, such as running cool water over the affected area, stopping contact with the chemical, and not interfering if electrical current cannot be stopped.
3) It also discusses frostbite, describing prevention, signs of first, second and third degree frostbite, and first aid steps like sheltering the victim and avoiding refreezing or rubbing affected areas.
ppt burns.pptx
This document discusses different types of burns, including thermal burns caused by fire, heat, or chemicals; electrical burns; and radiation burns. It describes burn severity based on depth and percentage of total body surface area affected. First aid procedures are outlined, such as cooling the burn with water and covering it loosely with a sterile bandage. Hospitalization, pain management, and wound care are also discussed. Surgical techniques like dermabrasion are mentioned as part of longer-term treatment.
BURNS.pptx
Burns are injuries to the skin caused by heat, electricity, chemicals, light or friction. They can range from minor first degree burns involving only the outer layer of skin to severe third degree burns destroying both the outer and inner layers of skin. Treatment depends on the severity of the burn but may include cooling the burn, applying antibiotic ointment, wrapping it loosely, taking pain medications, fluid replacement and potentially skin grafts for severe burns. Complications can include infection, shock, organ dysfunction and scarring if not properly treated.
First Aid for Burns.pptx
Burns are soft tissue injuries caused by different agents like heat, electricity or chemicals.
Burns can affect the different layers of the skin depending on the severity.
Burns are classified into first burns, second degree burns and third degree burns.
FIRST DEGREE BURN:
Involve only the top layer of skin.
Cause skin to become red and dry, usually painful and the area may swell.
Usually heal within a week without permanent scarring.
SECOND DEGREE BURNS:
Deeper than first degree burns involving several layers of skin.
Skin is red and has blisters that may open and seep clear fluid making the skin appear wet.
The burned skin may appear mottled.
Usually painful and the area swollen.
The burn heals within a few weeks. Scarring may occur.
THIRD DEGREE BURN:
Destroys all layers of skin and any or all of the underlying structures – fat, muscle, bones, etc.
Look brown or black (charred) with the tissues underneath sometimes appearing white.
Can be extremely painful or relatively painless if the burn destroys the nerve endings.
Third degree burns are life threatening and urgent medical attention is required.
FIRST AID CARE FOR BURN:
Place the burn area under running water or immerse it water for at least 10 minutes.
Use dry, sterile dressings/loose bandage.
Prevents infection.
FIRST AID CARE FOR BURN:
Do not apply ice or ice water directly to any burn.
Do not touch a burn with anything except a clean covering.
Do not put butter, grease, toothpaste or oil. They increase the risk of infection.
Do not remove pieces of clothing that stick to a burn.
Don’t break blisters.
Do not use any ointment on a severe burn.
Do not assume the burn injury is minor. Even a small burn can be serious depending on its location and the age of the victim.
BURNS - very basic presentation for idea
Burns are injuries to the skin or tissue caused by heat, radiation, electricity, chemicals, or friction. The severity depends on the depth and extent of the burn. There are four degrees of burns: first degree affects the outer epidermis and is painful; second degree also involves the dermis and causes blistering; third degree destroys all skin layers and requires skin grafting; fourth degree burns the deepest layers including muscle and is often fatal. Treatment depends on the degree but may include cleaning, antibiotics, skin grafting, and surgery.
Burns first aid
This document provides information on first aid for different types of burns. It describes first, second, and third degree burns based on depth of skin damage. For minor first and second degree burns, it recommends cooling the burned area with cold water, not breaking blisters, and seeking medical help for more serious burns or if signs of infection appear. For chemical or electrical burns, it stresses immediately flushing the affected area with water for 15-20 minutes and seeking prompt medical care for eye injuries or extensive skin exposure.
LS 2 5 The Integumentary System
The document discusses the structure and functions of the skin and its appendages. It describes the layers of the skin - epidermis and dermis - and structures within them like hair follicles, sebaceous glands, sweat glands. Common skin conditions like cuts, burns, psoriasis, acne, and their treatment are explained. Skin cancers and their relationship to sun exposure is also mentioned.
burns ppt.
A burn is an injury to the skin or flesh caused by heat, electricity, chemicals, friction or radiation. There are three degrees of burns: first-degree burns damage the outer layer of skin, second-degree burns damage the outer and inner layers, and third-degree burns damage the deepest skin layers and tissues below. Burns can cause swelling, blistering, scarring, shock and even death if severe, and increase risk of infection by damaging the skin's protective barrier. Treatment depends on the degree of the burn, with first and second usually healing without grafts but third often requiring skin grafts.
First aid application
The document provides information on treating various common first aid situations:
- Bite wounds, puncture wounds, bruises, burns, cuts, electric shocks, nosebleeds, and fractures are discussed. Minor injuries generally require cleaning and dressing wounds, while more serious injuries like major burns or head injuries may require immediate medical attention.
- First aid procedures focus on stopping bleeding, preventing infection, treating for shock, and seeking further help when needed. First aiders should be able to identify when an injury or illness requires attention beyond basic first aid.
SOSFire! IO2 course secondary schools EN
This document discusses fire and burn prevention and treatment. It begins by asking how fires can be prevented and listing common causes. It then provides statistics indicating that 120,000 people are hospitalized annually for burns, with 15,000 requiring treatment at specialized burn centers. The document outlines the various types and depths of burns and appropriate first aid responses. It emphasizes the importance of promptly cooling burns with water for 20 minutes and avoiding infection. The document describes burn center facilities and treatments like wound cleaning, skin grafting, and light therapy to aid healing. It aims to educate about burn prevention, first aid, and clinical management to reduce impacts.
CHAPTER EIGHT CH.docx
This document provides information on first aid procedures for common accidents that can occur at home, including burns, fractures, poisoning, and snake bites. It describes classifying burns based on their depth, immobilizing fractures, removing contaminated clothing during poisoning, and keeping snake bite victims calm and restricting movement until medical help arrives. The document emphasizes seeking prompt medical treatment for serious injuries and not attempting to cut, suck, or apply tourniquets to snake bites.
Similar to Burns#1 (20)
More from Angela DeHart
ISTE Presentation Resource List
Resource list for Noora Aabad's AI presentation. Ethical AI is a shared responsibility. Students, teachers, users, programmers, investors, regulators, and others all play a role in determining the future of AI technology development and use. This session will feature an innovative and interactive approach to a virtual panel, giving both panelists and attendees the opportunity to interact and respond to various AI scenarios and activities. While the moderator and panelists demonstrate and discuss on-screen, attendees also have the opportunity to share their own insights, observations, and questions in a moderated chat.
AldiEliminatingPlasticBage2023.pdf
ALDI is working to make its business more sustainable through reducing plastic usage, increasing recyclability, cutting carbon emissions, reducing food waste, and sourcing products responsibly. Some key initiatives include committing to eliminate all plastic shopping bags by 2023, making over 60% of exclusive packaging reusable/recyclable, offsetting 100% of energy usage with renewable sources, and requiring 53% of coffee to come from sustainable sources. ALDI also donates food to food banks and other charitable causes to support communities.
IbelongInCSsample.pdf
A Mexican scientist discusses his background in biology and palaeontology. He became interested in computer science through secondary school classes and seeing his father work as a programmer. As a palaeontologist, he applies computer science concepts like data science and artificial intelligence to digitize fossils. He emphasizes embracing frustration when learning and believes communication and listening are important for diversity in universities.
CSTA Teacher Standards (2021)
Effective CS teachers demonstrate thorough knowledge of CS concepts and integrate them with computational thinking practices. They understand how CS concepts progress across grade levels. Effective CS teachers advocate for equity and inclusion, examine biases, and use student data to improve equity. They also continuously develop their own skills and collaborate with others. Effective CS teachers design engaging, standards-aligned learning experiences that meet student needs and build self-efficacy in CS through inquiry-based learning and student collaboration.
Starting early: Developing 21st Century Skills for Your Next Step in STEM: Co...
Resources for the STEM Impressionists' presentation: Starting early: Developing 21st Century Skills for Your Next Step in STEM: College/Career!
Focus Resources
The document provides a list of 14 resources related to STEM education and careers. These include the website and social media accounts for the STEM Impressionists Program (SIP), links to SIP members' LinkedIn profiles, extracurricular activities, competitions, scholarships, college application portals, top employability skills, coding resources, funding opportunities, SIP member resumes, STEM-related holidays, information on ethics in technology, and organizations that support women in STEM.
HackSIP2: The Extended Class Poster
The document announces a one-day virtual event hosted by the STEM Impressionists Program on August 14th from 10am to 3pm EST for middle and high school girls. It will feature introductory classes on Scratch programming, machine learning, and intro to Python to encourage participation in STEM fields. Interested students can register for the event at the provided link.
HackSIP2: The Extended Class
The girls had so much fun with Part 1 that we are throwing a part2! Scratch and Python class seminar!
Tanisha Dhami's resume
Tanisha Dhami has extensive experience in STEM fields such as programming, mathematics, and physics competitions and courses. She has a strong academic background graduating near the top of her class from Vidyashilp Academy in 2020 and is currently studying at Mallya Aditi International School. Her resume highlights leadership roles in math clubs, organizing coding competitions, and simulation projects that demonstrate her skills and passion for STEM subjects.
Pallab Layak's resume
Pallab Layak is a recent high school graduate with extensive experience in STEM fields such as mathematics, computer science, and data analytics. He has achieved high scores on standardized tests and placed in several international and national competitions in mathematics. Pallab has taken numerous online courses through platforms like Coursera and Wharton covering topics like machine learning, data analytics, programming, and physics. He has held leadership positions in math and coding clubs and has experience mentoring others and organizing programming.
2020 Noora Aabed
Noora Aabed is a 2022 graduate of Henry Ford Early College in Detroit, Michigan with a 3.95 GPA. She has extensive experience in STEM fields through coding courses and camps, presenting at hackathons and seminars, competing in STEM competitions, and volunteering for various STEM and humanitarian organizations. Her experience includes projects in quantum computing, international ambassadorship, and rotations at Henry Ford Health System. References are available upon request.
STEM Calendar
This document lists various science, technology, engineering, arts, and math (STEAM) related days and weeks that occur throughout the year. Some of the notable events mentioned include Environment Day on June 5th, International Women in Engineering Day on June 23rd, the anniversary of the Moon Landing on July 20th, National Robotics Week from April 4-10th, Earth Day on April 22nd, and National Pluto isn't a Planet Day on June 24th. The document also notes that February is National Inventors Month and the week of February 21st is National Engineering Week.
HackSIP 2 Activity Flyer
This is the list of activities that are going to be presented at the HackSIP2 seminar.
Class #7: Here's the Scoop
Starting With Scratch is a block-based programming course provided by the CodeTigers and STEM Impressionists Program collaboration. Over the course of 10 weeks, students will practice programming on Scratch while simultaneously learning fundamental computer science concepts. Each week will be taught by two student mentors who will walk participants through different lessons that will overtime build their understanding of coding through the Scratch platform. Throughout the course, students will be provided with resources to further their exploration of computer science in addition to preparing them to continue on to other coding platforms such as Python, micro:bit, and HTML/CSS. YouTube class: https://www.youtube.com/watch?
Register for the Coolest Project Competition!
This document lists the details of how to register for Raspberry Pi's International competition. All of the information was obtained from their website. Please double-check the website as the information that is covered in this document may have changed since it was posted. We do not want you to miss out on the competition! (Document posted April 25, 2021).
Class #8: Kites, Cookies, or Samosas
Starting With Scratch is a block-based programming course provided by the CodeTigers and STEM Impressionists Program collaboration. Over the course of 10 weeks, students will practice programming on Scratch while simultaneously learning fundamental computer science concepts. Each week will be taught by two student mentors who will walk participants through different lessons that will overtime build their understanding of coding through the Scratch platform. Throughout the course, students will be provided with resources to further their exploration of computer science in addition to preparing them to continue on to other coding platforms such as Python, micro:bit, and HTML/CSS. YouTube class: https://www.youtube.com/watch?
Class #6: Fun-ctions
Starting With Scratch is a block-based programming course provided by the CodeTigers and STEM Impressionists Program collaboration. Over the course of 10 weeks, students will practice programming on Scratch while simultaneously learning fundamental computer science concepts. Each week will be taught by two student mentors who will walk participants through different lessons that will overtime build their understanding of coding through the Scratch platform. Throughout the course, students will be provided with resources to further their exploration of computer science in addition to preparing them to continue on to other coding platforms such as Python, micro:bit, and HTML/CSS. YouTube class: https://www.youtube.com/watch?
Coolest Project Competition
Coolest Projects online is the world’s leading technology showcase for young people. If you enjoy making things with technology, Coolest Projects online is an amazing opportunity to get creative, have fun, and celebrate what you have made.
Your creation will be showcased in the Coolest Projects online gallery, for people all over the world to see! Coolest Projects online is free, it is open to anyone up to the age of 18, and you can join in wherever you are in the world.
Abia Zahir
Abia Zahir is a 2021 graduate of Annandale High School interested in studying computer science. She has extensive experience in computer science and robotics through numerous online courses and certifications. She has organized and participated in many STEM outreach and competition events. She also has leadership experience through involvement with clubs like NSBE and internships like planning a STEM conference for parents and children. Her resume demonstrates strong qualifications for computer science through academic achievement, projects, and recognition.
Class #3: Sounds
Starting With Scratch is a block-based programming course provided by the CodeTigers and STEM Impressionists Program collaboration. Over the course of 10 weeks, students will practice programming on Scratch while simultaneously learning fundamental computer science concepts. Each week will be taught by two student mentors who will walk participants through different lessons that will overtime build their understanding of coding through the Scratch platform. Throughout the course, students will be provided with resources to further their exploration of computer science in addition to preparing them to continue on to other coding platforms such as Python, micro:bit, and HTML/CSS. YouTube class: https://www.youtube.com/watch?
More from Angela DeHart (20)
Starting early: Developing 21st Century Skills for Your Next Step in STEM: Co...
Starting early: Developing 21st Century Skills for Your Next Step in STEM: Co...
Recently uploaded
一比一原版(trent学位证书)加拿大特伦特大学毕业证如何办理
原版一模一样【微信：741003700 】【(trent学位证书)加拿大特伦特大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(trent学位证书)加拿大特伦特大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(trent学位证书)加拿大特伦特大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(trent学位证书)加拿大特伦特大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(trent学位证书)加拿大特伦特大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(Bristol毕业证)布里斯托大学毕业证如何办理
原件一模一样【微信：95270640】【布里斯托大学毕业证Bristol学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理布里斯托大学毕业证硕士学位证成绩单Bristol学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理布里斯托大学毕业证Bristol学位证硕士学位证成绩单【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理布里斯托大学毕业证硕士学位证成绩单Bristol学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理布里斯托大学毕业证硕士学位证成绩单Bristol学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
best authentic mexico food in houston.pdf
Looking for the best authentic Mexican food in Houston? Discover vibrant flavors and traditional recipes at our renowned Mexican restaurant. We offer a diverse menu featuring classic dishes like tacos, enchiladas, tamales, and guacamole, all made with fresh, locally-sourced ingredients.
一比一原版迪肯大学毕业证(DU毕业证书)学历如何办理
证书双学位定制【微信号:176555708】【迪肯大学毕业证(DU毕业证书)】【微信号:176555708】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Mumbai Call Girls Service | 9833363713 | Housewife Ready 4x7 At Your Doorstep
Mumbai Call Girls Service | 9833363713 | Housewife Ready 4x7 At Your Doorstep
Exploring_Karnali_Region_of_Nepal_(Food, Culture and People).pptx
Largest province in Nepal, Mountain landscape with 47% of an area located above 4000 masl, Characterized by its unique cultural heritage, diverse geography, and traditional farming practices
Traditional Agriculture: Subsistence farming on terraced fields (rice, wheat, millet, bean, potato and barley)
Fruits: Apple, walnut, orange, etc.
Livestock Rearing: Transhumance system of animal husbandry (goats, sheep, and cattle)
Dietary Staples: Rice, lentils, vegetables, and dairy products
Food Preparation: Often prepared using locally grown ingredients with traditional cooking methods
Religious Practices: Hinduism and Buddhism
Social Customs: Strong community bonds, traditional attire and customs are upheld during festivals
Environmental Connection: Respect for nature and reverence for sacred sites
Historical Context: Farming techniques shaped by the region's rugged terrain, climate, and historical interactions
Cultural Influence: Food preferences, agricultural rituals, and farming practices have been influenced by a blend of indigenous traditions, Hindu and Buddhist beliefs, and trade routes
Enhancing Agricultural Practices: Introducing modern farming techniques without compromising traditional values
Access to Education and Resources: Investing in education and providing access to agricultural inputs
Promoting Sustainable Tourism: Leveraging the region's cultural richness and natural beauty
Intersection of culture, agriculture, and tradition
Embracing sustainable development practices and honoring cultural heritage
Enhance the lives of its people while safeguarding their unique way of life
Traditional Flavors, Modern Techniques.docx
Mint Progressive Indian, located in downtown Seattle, offers a unique dining experience by blending traditional Indian flavors with modern culinary techniques. Our menu features innovative dishes crafted from the freshest ingredients, served in a chic and inviting atmosphere. Perfect for casual meals, romantic dinners, and special events, we pride ourselves on exceptional service and a vibrant dining experience. Join us at Mint Progressive Indian to explore the future of Indian cuisine. Visit Mint Progressive Indian for more information and reservations.
Agriculture Market : Global Trends and Forecast Analysis (2023-2032)
The global agriculture market is anticipated to grow at a substantial CAGR of 9.60% in the upcoming years. The global agriculture industry was estimated to be worth USD 13.5 billion in 2022 and was expected to be worth USD 25.6 billion by 2030.
Why Should Teens Consider Cooking Classes
From mastering essential life skills like meal planning and budgeting to fostering independence and creativity, teens can embark on a culinary journey that prepares them for a healthier, more self-sufficient future. Join the cooking adventure today!
Science Text Book characteristics and library
This ppt contains qualities of a good Science Text Book, need for text book, importance of text book, criteria of a science text book, text book analysis, content analysis, Hunter's score card, library, utilization of library.
Discover the Magic 7 Fruits for Weight Loss You Need to Know About!.pdf
Fruits, a.k.a, nature’s candy are beneficial for tons of reasons. They’re filled with vitamins and nutrients that are not just healthy but delicious too. And, some have officially been identified as fruits for weight loss, which makes them ideal for any and every kind of diet you are currently experimenting with.
Also read: https://rapidleaks.com/lifestyle/food-drink/fruits-weight-loss/
Food smoking- processing & preservation.pptx
Smoking as a preservation and processing method for food, Food preservation, food processing, smoking, meat and meat products, methods of food smoking, application, cold smoking, hot smoking, warm smoking, liquid smoking, food industry and business, offset smokers, upright drum smokers, Vertical water smokers, Propane smokers, Electrical smokers and related health concerns.
一比一原版美国俄克拉荷马城市大学毕业证（ocu学位证）如何办理
原件一模一样【微信：WP101A】【美国俄克拉荷马城市大学毕业证（ocu学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国俄克拉荷马城市大学毕业证（ocu学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国俄克拉荷马城市大学毕业证（ocu学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国俄克拉荷马城市大学毕业证（ocu学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国俄克拉荷马城市大学毕业证（ocu学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版美国俄克拉荷马大学毕业证（ou学位证）如何办理
原件一模一样【微信：WP101A】【美国俄克拉荷马大学毕业证（ou学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国俄克拉荷马大学毕业证（ou学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国俄克拉荷马大学毕业证（ou学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国俄克拉荷马大学毕业证（ou学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国俄克拉荷马大学毕业证（ou学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版美国宾夕法尼亚州立大学毕业证（penstate学位证）如何办理
原件一模一样【微信：WP101A】【美国宾夕法尼亚州立大学毕业证（penstate学位证）成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国宾夕法尼亚州立大学毕业证（penstate学位证）学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国宾夕法尼亚州立大学毕业证（penstate学位证）学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国宾夕法尼亚州立大学毕业证（penstate学位证）学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国宾夕法尼亚州立大学毕业证（penstate学位证）学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (16)
Mumbai Call Girls Service | 9833363713 | Housewife Ready 4x7 At Your Doorstep
Mumbai Call Girls Service | 9833363713 | Housewife Ready 4x7 At Your Doorstep
Exploring_Karnali_Region_of_Nepal_(Food, Culture and People).pptx
Exploring_Karnali_Region_of_Nepal_(Food, Culture and People).pptx
Coffee Presentation Coffee in the CordillerasPDF.pdf
Coffee Presentation Coffee in the CordillerasPDF.pdf
Agriculture Market : Global Trends and Forecast Analysis (2023-2032)
Agriculture Market : Global Trends and Forecast Analysis (2023-2032)
Discover the Magic 7 Fruits for Weight Loss You Need to Know About!.pdf
Discover the Magic 7 Fruits for Weight Loss You Need to Know About!.pdf
Burns#1
- 2. In this slide we will talk about burns. What is a burn? How do doctors classify them? How can u prevent yourself from getting a burn? First aid care, what to do or what not to do when u get a burn? How are they caused? All of these questions will be answered in this power point.
- 3. What is a burn? A burn is a destruction of different layers of the skin, and the structures within the skin such as, sweat glands, oil glands and hair follicles. It can cause the skin to turn red or purple depending on how much damage was done.
- 4. Classification Burns are typically classified as first-degree, second-degree, or third-degree, depending on the depth of the burn and the degree of tissue damage. A first-degree burn, such as mild sunburn, affects only the surface layers of the skin. The burned area is red and tender. A second-degree burn affects deeper layers, causing blisters to form. Swelling also may occur. Many second-degree burns are caused by deep sunburn, contact with hot liquids or hot objects, or brief exposure to flames. A third-degree burn penetrates all of the layers of the skin and affects the tissues underneath. The skin may appear white, very red, or even charred. Most victims have no feeling in the area of a third-degree burn because the burn destroys nerve endings.
- 5. First aid care Burns should be cooled immediately by flushing the burned area with cool water or by applying cool, wet towels until the pain subsides or professional help arrives. Cooling the burned area immediately can help prevent the burn from worsening. Burns can be loosely wrapped in a sterile bandage to help prevent infection and reduce pain until professional medical help is obtained. Chemical burns should be flushed immediately with water for at least 20 minutes or until emergency medical assistance arrives. Have the victim remove any clothing or items such as glasses, goggles, or jewelry that have come in contact with the chemicals.
- 6. Conclusion This power point was about burns. I hope u found it educational and enjoy it!