BioAnalysis exams1
•
0 likes•20 views
This document is a scanned receipt from a grocery store listing the items purchased which include milk, eggs, bread, bananas, and ground beef. The subtotal for the items is $34.87 and tax is $2.99 for a total of $37.86. The customer paid with cash and received $2.14 in change.
Report
Share
Report
Share
Download to read offline
Recommended
R35 vol 2 Recopilación de artículos sobre la guerra civil en El Salvador 115p
The document appears to be a scanned copy of a legal contract for the sale of a residential property located in California. The contract details the purchase price of the property, the down payment, terms for the remaining balance, contingencies for inspections and appraisal, and closing date. The contract is signed by both the buyer and seller agreeing to the terms of the sale.
Tocci chapter 13 applications of programmable logic devices extended
The document discusses the family tree of digital systems, including standard logic, ASICs, microprocessors, DSPs, and different types of programmable logic devices like PLDs, CPLDs, and FPGAs. It covers the architectures of early PLDs like PROM, PAL, and FPLA, which have programmable AND and OR gates, as well as the different programming technologies for modern PLDs like SRAM, flash memory, EPROM, and antifuse.
Tocci chapter 12 memory devices
The document discusses various types of memory devices and technologies. It covers topics like memory terminology, ROM, EPROM, EEPROM, and flash memory. Key points include that ROM is read-only memory that can be mask-programmed or one-time programmable, while EPROM, EEPROM and flash memory use floating-gate MOS transistors and can be electrically erased and reprogrammed in bulk or individually.
Tocci ch 9 msi logic circuits
This document covers MSI (medium-scale integration) logic circuits. It discusses decoders, multiplexers, encoders, and other digital logic components. Decoders take binary inputs and activate one of multiple outputs. Multiplexers select one of several inputs to output based on a digital select code. Encoders convert coded inputs to binary outputs. The document provides circuit diagrams and explanations of common MSI components like decoders, multiplexers, priority encoders, and code converters. It also discusses applications such as seven-segment displays, LCDs, and digital systems.
Tocci ch 7 counters and registers modified x
This document discusses various types of counters and registers, including asynchronous (ripple) counters, synchronous (parallel) counters, decade counters, BCD counters, shift registers, ring counters, and Johnson counters. It provides details on their structure, operation, and applications. Key topics covered include propagation delay in ripple counters, the advantages of synchronous counters, designing counters with different mod numbers, decoding counter states, and using counters for functions like stepper motor control.
Tocci ch 6 digital arithmetic operations and circuits
The document discusses digital arithmetic operations and circuits, including binary addition, representing signed numbers, addition and subtraction in the two's complement system, multiplication and division of binary numbers, BCD addition, hexadecimal arithmetic, and arithmetic circuits. It describes how an ALU performs arithmetic operations by accepting data from memory and executing instructions from the control unit, using adders, registers, and control signals to perform addition and subtraction.
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
This document contains lecture slides on logic gates and Boolean algebra. It covers topics like De Morgan's theorem, sum of products and product of sums, logic gate representations including NAND and NOR gates, flip flops including JK and D flip flops. Circuit diagrams and truth tables are provided for latching circuits and different types of flip flops. The document is copyrighted and appears to be from a course on logic gates and Boolean algebra taught by Muhammad A M Islam.
A15 sedra ch 15 memory circuits
The document discusses latches and flip-flops, basic memory circuits. It describes the latch, SR flip-flop, CMOS enabled SR flip-flop, and CMOS SRAM memory cell. It also discusses a one-transistor dynamic RAM cell. The document focuses on the circuit designs and operations of various basic memory components.
Recommended
R35 vol 2 Recopilación de artículos sobre la guerra civil en El Salvador 115p
The document appears to be a scanned copy of a legal contract for the sale of a residential property located in California. The contract details the purchase price of the property, the down payment, terms for the remaining balance, contingencies for inspections and appraisal, and closing date. The contract is signed by both the buyer and seller agreeing to the terms of the sale.
Tocci chapter 13 applications of programmable logic devices extended
The document discusses the family tree of digital systems, including standard logic, ASICs, microprocessors, DSPs, and different types of programmable logic devices like PLDs, CPLDs, and FPGAs. It covers the architectures of early PLDs like PROM, PAL, and FPLA, which have programmable AND and OR gates, as well as the different programming technologies for modern PLDs like SRAM, flash memory, EPROM, and antifuse.
Tocci chapter 12 memory devices
The document discusses various types of memory devices and technologies. It covers topics like memory terminology, ROM, EPROM, EEPROM, and flash memory. Key points include that ROM is read-only memory that can be mask-programmed or one-time programmable, while EPROM, EEPROM and flash memory use floating-gate MOS transistors and can be electrically erased and reprogrammed in bulk or individually.
Tocci ch 9 msi logic circuits
This document covers MSI (medium-scale integration) logic circuits. It discusses decoders, multiplexers, encoders, and other digital logic components. Decoders take binary inputs and activate one of multiple outputs. Multiplexers select one of several inputs to output based on a digital select code. Encoders convert coded inputs to binary outputs. The document provides circuit diagrams and explanations of common MSI components like decoders, multiplexers, priority encoders, and code converters. It also discusses applications such as seven-segment displays, LCDs, and digital systems.
Tocci ch 7 counters and registers modified x
This document discusses various types of counters and registers, including asynchronous (ripple) counters, synchronous (parallel) counters, decade counters, BCD counters, shift registers, ring counters, and Johnson counters. It provides details on their structure, operation, and applications. Key topics covered include propagation delay in ripple counters, the advantages of synchronous counters, designing counters with different mod numbers, decoding counter states, and using counters for functions like stepper motor control.
Tocci ch 6 digital arithmetic operations and circuits
The document discusses digital arithmetic operations and circuits, including binary addition, representing signed numbers, addition and subtraction in the two's complement system, multiplication and division of binary numbers, BCD addition, hexadecimal arithmetic, and arithmetic circuits. It describes how an ALU performs arithmetic operations by accepting data from memory and executing instructions from the control unit, using adders, registers, and control signals to perform addition and subtraction.
Tocci ch 3 5 boolean algebra, logic gates, combinational circuits, f fs, - re...
This document contains lecture slides on logic gates and Boolean algebra. It covers topics like De Morgan's theorem, sum of products and product of sums, logic gate representations including NAND and NOR gates, flip flops including JK and D flip flops. Circuit diagrams and truth tables are provided for latching circuits and different types of flip flops. The document is copyrighted and appears to be from a course on logic gates and Boolean algebra taught by Muhammad A M Islam.
A15 sedra ch 15 memory circuits
The document discusses latches and flip-flops, basic memory circuits. It describes the latch, SR flip-flop, CMOS enabled SR flip-flop, and CMOS SRAM memory cell. It also discusses a one-transistor dynamic RAM cell. The document focuses on the circuit designs and operations of various basic memory components.
A14 sedra ch 14 advanced mos and bipolar logic circuits
This document discusses advanced logic circuits including pseudo-NMOS logic, pass-transistor logic, dynamic MOS logic, emitter-coupled logic (ECL), and BiCMOS digital circuits. Pseudo-NMOS logic uses one transistor per input instead of two to reduce area and delay. Pass-transistor logic builds logic functions using NMOS or transmission gate switches. Dynamic MOS logic uses precharge and evaluate phases to reduce static power at the cost of increased sensitivity to noise. ECL uses differential pairs for noise immunity and constant current sources. BiCMOS combines CMOS and BJTs to achieve high performance with lower power than ECL.
A13 sedra ch 13 cmos digital logic circuits
This document discusses CMOS digital logic circuits. It covers special characteristics like fan-out, power dissipation, and propagation delay. It then describes the basic CMOS inverter circuit. The inverter uses complementary NMOS and PMOS transistors for the pull-down and pull-up networks. When the input is low, the NMOS transistor is on and the PMOS is off, pulling the output high. When the input is high, the opposite occurs. This allows the output to switch between 0V and the supply voltage with very low static power dissipation.
A09 sedra ch 9 frequency response
The document discusses the high-frequency response of common-emitter (CE) amplifiers. It first examines the CE amplifier circuit and its mid-band behavior when the capacitors are short circuits. It then explores how each internal capacitor (CB, CC, CE) affects the frequency response as it blocks signal flow at lower frequencies. The document also considers the Miller effect, which multiplies the input capacitance seen at the base due to feedback through the amplifier. Overall, the internal capacitances lower the amplifier's bandwidth as frequency decreases.
5 sedra ch 05 mosfet.ppsx
This document describes the structure and operation of MOS field-effect transistors (MOSFETs). It covers topics such as device structure, current-voltage characteristics, MOSFET circuits at DC, and large-signal equivalent circuit models. Examples are provided to illustrate how to analyze MOSFET circuits and calculate current and voltage values. The document also discusses the physical mechanisms involved in MOSFET operation such as creation of a channel for current flow and derivation of current-voltage relationships.
5 sedra ch 05 mosfet
This document discusses MOS field-effect transistors (MOSFETs) and includes the following topics:
1. It outlines the structure and operation of MOSFET devices, including creating a channel for current flow and deriving the iD-vDS relationship.
2. It covers current-voltage characteristics of MOSFETs such as the iD-vDS, iD-vGS curves and their different operating regions.
3. It provides examples of solving for unknown variables in MOSFET circuits operating in different regions, such as the triode and saturation regions.
5 sedra ch 05 mosfet revision
This document discusses MOS field-effect transistors (MOSFETs) and their operation. It covers MOSFET device structure and physical operation, current-voltage characteristics, MOSFET circuits at DC, applying MOSFETs in amplifier design, small signal operations and models, and other related topics. The document contains diagrams and equations to illustrate MOSFET characteristics and circuit analysis. It provides an overview of the key concepts and applications of MOSFET devices.
Fields Lec 2
This document discusses coordinate systems and vector calculus concepts needed for electromagnetic field theory. It introduces Cartesian, cylindrical, and spherical coordinate systems. It explains that vector integration requires defining appropriate differential elements (length, area, volume) that vary based on the coordinate system. It also introduces concepts of gradient, divergence, and curl - vector operators used to take derivatives of vector fields. The gradient represents the maximum rate of change, divergence measures flux, and curl represents rotational nature. Expressions for these operators are given in the three coordinate systems.
Fields Lec 1
The document discusses the interaction of electromagnetic fields (EMFs) with biological systems. It notes that the topic is studied to assess potential health hazards, enable applications in biology and medicine, and optimize the design of EM devices. The document outlines various effects of EMF exposure at different frequencies, therapeutic and diagnostic EMF applications, and the need to model human exposure and effects through governing equations and human body models. Key areas covered include dosimetry, various human body models, RF applications like keyless entry and MRI, hyperthermia modeling, and diagnostic applications such as endoscopic capsules.
Fields Lec 5&6
1. The document discusses various electromagnetic boundary conditions including:
- Electric and magnetic field boundary conditions between dielectric-dielectric interfaces where the normal component of B and tangential component of E are continuous.
- Conductor-dielectric boundary conditions where the surface charge density is related to the normal electric field component.
2. Faraday's law relates the rate of change of magnetic flux through a loop to the induced electromotive force around the loop. Lenz's law states that the induced current will flow such that it creates a magnetic field opposing the original change in flux.
3. The plane wave solution for electromagnetic waves in free space represents the electric and magnetic fields as propagating sinusoidal functions of space and time with
Fields Lec 4
Electrical stimulation can be used for many applications including vision restoration, epilepsy control, tremor control, cardiac pacing, and more. Magnetic fields are generated by moving electric charges. The Biot-Savart law describes the magnetic field generated by a current element, while Ampere's law relates the magnetic field to the current passing through a closed loop. Materials respond differently to magnetic fields based on properties like diamagnetism, paramagnetism, and ferromagnetism. Ferromagnetic materials have domains that can align with an external magnetic field, allowing the material to retain magnetization.
Fields Lec 3
Here are some examples of FDA-approved therapeutic devices that use direct current (DC) electric fields:
- Bone growth stimulators - Use pulsed electromagnetic fields or capacitively coupled electric fields to promote bone healing of fractures that are not healing on their own.
- Transcutaneous electrical nerve stimulators (TENS) - Apply electric currents to stimulate nerves for pain relief and muscle rehabilitation.
- Iontophoresis devices - Use low-level electrical currents to drive ionized drug molecules through the skin for local drug delivery.
- Cardioversion/defibrillation devices - Apply controlled electric shocks to the heart to treat irregular heart rhythms like atrial fibrillation or ventricular fibrillation.
Lecture 2 (system overview of c8051 f020) rv01
The document provides an overview of the Silicon Labs C8051F020 microcontroller. It describes the microcontroller's CPU, memory organization, I/O ports, analog and digital peripherals such as ADCs, DACs, and comparators. It also discusses the microcontroller's special function registers used to control and interface with its various peripherals.
Lecture 1 (course overview and 8051 architecture) rv01
This document provides an overview and syllabus for a course on the 8051 microcontroller architecture. The course covers the 8051 architecture, instruction set, programming using assembly and C languages, peripherals, interrupts, timers, serial communication, analog-to-digital converters, and more. The goals are for students to understand the 8051 architecture, develop skills in programming 8051 microcontrollers using different languages, and interface the microcontroller to external components. The course consists of lectures, tutorials, and labs using the Silicon Labs C8051F020 development board.
Lecture 12 (adc) rv01
The document discusses analog to digital converters (ADCs). It describes what an ADC is and how it converts an analog input voltage to a digital output code. It then discusses specifics of the 12-bit ADC0 on the C8051F020 microcontroller, including its input range, output coding, configuration registers, starting conversions, and programming. It provides examples of setting the SAR0 clock frequency, PGA gain, multiplexer channel, and enabling ADC0 to take conversions.
Lecture 11 (dac and comparator) rv01
The document discusses digital-to-analog converters (DACs) and analog comparators. It describes the 12-bit DACs and analog comparators available on the C8051F020 microcontroller. It explains how the DACs can be programmed to output analog voltages through control registers. It also details how the analog comparators work, including their functional block diagram, hysteresis characteristics, and interrupt capabilities.
Lecture 10 (serial communication)
This document provides an overview of serial communication and UART operation. It discusses asynchronous and synchronous serial communication, UART block diagrams, clock requirements, programming UARTs, operation modes, baud rate calculations using timers 1 and 2, and initializing UART0 using timers 1 and 2 to generate baud rates. Equations are provided to calculate the reload values for timers 1 and 2 to generate a desired baud rate given the system clock frequency. Code examples initialize UART0 for 115200 baud communication using timer 1 or timer 2 clock sources.
Lecture 5 (system clock crossbar and gpio) rv012
The document discusses the system clock, watchdog timer, port pins, and crossbar for the C8051F020 microcontroller. It describes initializing the system clock from the internal or external oscillator, configuring the watchdog timer interval and disabling it. It also covers configuring port pin output modes as open-drain or push-pull and digital inputs. Finally, it explains the crossbar's pin assignment priority and registers for configuration.
Lecture 4 (8051 instruction set) rv01
The document summarizes the instruction set of the 8051 microcontroller. It describes the different addressing modes including register, direct, indirect, immediate, relative, absolute, long and indexed addressing. It also explains the various instruction types such as arithmetic, logical, data transfer, boolean and program branching instructions. Examples are provided for different instructions like ADD, MOV, JMP etc. to illustrate how they work and affect processor registers.
Lecture 3 (tool stick platform) rv01
The document describes the ToolStick development platform from Silicon Labs. It consists of a base adapter that provides a USB debug interface and daughter cards with target microcontrollers. The ToolStick platform and Silicon Labs IDE software allow developing and debugging code on the microcontroller. Key features of the ToolStick described include programming and debugging the microcontroller, configuring ports in real-time using the IDE, setting breakpoints, single-stepping code, and viewing variable values while debugging.
Modern control 2
The document discusses concepts related to linear time-invariant systems represented by state-space models. It provides:
1) An overview of desired learning outcomes related to solving state equations and understanding controllability and observability.
2) Details on solving the homogeneous and non-homogeneous state equations, including definitions of zero-state and zero-input responses.
3) The condition for a system to be completely state controllable, which is that the controllability matrix must be of full rank.
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support will integrate with emerging technologies such as augmented reality (AR) and virtual reality (VR) to enhance service delivery. AR-enabled smart glasses or VR environments will provide immersive support experiences, allowing customers to visualize solutions, receive step-by-step guidance, and interact with virtual support agents in real-time. These technologies will bridge the gap between physical and digital experiences, offering innovative ways to resolve issues, demonstrate products, and deliver personalized training and support.
https://www.leewayhertz.com/ai-in-customer-support/#How-does-AI-work-in-customer-support
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
More Related Content
More from cairo university
A14 sedra ch 14 advanced mos and bipolar logic circuits
This document discusses advanced logic circuits including pseudo-NMOS logic, pass-transistor logic, dynamic MOS logic, emitter-coupled logic (ECL), and BiCMOS digital circuits. Pseudo-NMOS logic uses one transistor per input instead of two to reduce area and delay. Pass-transistor logic builds logic functions using NMOS or transmission gate switches. Dynamic MOS logic uses precharge and evaluate phases to reduce static power at the cost of increased sensitivity to noise. ECL uses differential pairs for noise immunity and constant current sources. BiCMOS combines CMOS and BJTs to achieve high performance with lower power than ECL.
A13 sedra ch 13 cmos digital logic circuits
This document discusses CMOS digital logic circuits. It covers special characteristics like fan-out, power dissipation, and propagation delay. It then describes the basic CMOS inverter circuit. The inverter uses complementary NMOS and PMOS transistors for the pull-down and pull-up networks. When the input is low, the NMOS transistor is on and the PMOS is off, pulling the output high. When the input is high, the opposite occurs. This allows the output to switch between 0V and the supply voltage with very low static power dissipation.
A09 sedra ch 9 frequency response
The document discusses the high-frequency response of common-emitter (CE) amplifiers. It first examines the CE amplifier circuit and its mid-band behavior when the capacitors are short circuits. It then explores how each internal capacitor (CB, CC, CE) affects the frequency response as it blocks signal flow at lower frequencies. The document also considers the Miller effect, which multiplies the input capacitance seen at the base due to feedback through the amplifier. Overall, the internal capacitances lower the amplifier's bandwidth as frequency decreases.
5 sedra ch 05 mosfet.ppsx
This document describes the structure and operation of MOS field-effect transistors (MOSFETs). It covers topics such as device structure, current-voltage characteristics, MOSFET circuits at DC, and large-signal equivalent circuit models. Examples are provided to illustrate how to analyze MOSFET circuits and calculate current and voltage values. The document also discusses the physical mechanisms involved in MOSFET operation such as creation of a channel for current flow and derivation of current-voltage relationships.
5 sedra ch 05 mosfet
This document discusses MOS field-effect transistors (MOSFETs) and includes the following topics:
1. It outlines the structure and operation of MOSFET devices, including creating a channel for current flow and deriving the iD-vDS relationship.
2. It covers current-voltage characteristics of MOSFETs such as the iD-vDS, iD-vGS curves and their different operating regions.
3. It provides examples of solving for unknown variables in MOSFET circuits operating in different regions, such as the triode and saturation regions.
5 sedra ch 05 mosfet revision
This document discusses MOS field-effect transistors (MOSFETs) and their operation. It covers MOSFET device structure and physical operation, current-voltage characteristics, MOSFET circuits at DC, applying MOSFETs in amplifier design, small signal operations and models, and other related topics. The document contains diagrams and equations to illustrate MOSFET characteristics and circuit analysis. It provides an overview of the key concepts and applications of MOSFET devices.
Fields Lec 2
This document discusses coordinate systems and vector calculus concepts needed for electromagnetic field theory. It introduces Cartesian, cylindrical, and spherical coordinate systems. It explains that vector integration requires defining appropriate differential elements (length, area, volume) that vary based on the coordinate system. It also introduces concepts of gradient, divergence, and curl - vector operators used to take derivatives of vector fields. The gradient represents the maximum rate of change, divergence measures flux, and curl represents rotational nature. Expressions for these operators are given in the three coordinate systems.
Fields Lec 1
The document discusses the interaction of electromagnetic fields (EMFs) with biological systems. It notes that the topic is studied to assess potential health hazards, enable applications in biology and medicine, and optimize the design of EM devices. The document outlines various effects of EMF exposure at different frequencies, therapeutic and diagnostic EMF applications, and the need to model human exposure and effects through governing equations and human body models. Key areas covered include dosimetry, various human body models, RF applications like keyless entry and MRI, hyperthermia modeling, and diagnostic applications such as endoscopic capsules.
Fields Lec 5&6
1. The document discusses various electromagnetic boundary conditions including:
- Electric and magnetic field boundary conditions between dielectric-dielectric interfaces where the normal component of B and tangential component of E are continuous.
- Conductor-dielectric boundary conditions where the surface charge density is related to the normal electric field component.
2. Faraday's law relates the rate of change of magnetic flux through a loop to the induced electromotive force around the loop. Lenz's law states that the induced current will flow such that it creates a magnetic field opposing the original change in flux.
3. The plane wave solution for electromagnetic waves in free space represents the electric and magnetic fields as propagating sinusoidal functions of space and time with
Fields Lec 4
Electrical stimulation can be used for many applications including vision restoration, epilepsy control, tremor control, cardiac pacing, and more. Magnetic fields are generated by moving electric charges. The Biot-Savart law describes the magnetic field generated by a current element, while Ampere's law relates the magnetic field to the current passing through a closed loop. Materials respond differently to magnetic fields based on properties like diamagnetism, paramagnetism, and ferromagnetism. Ferromagnetic materials have domains that can align with an external magnetic field, allowing the material to retain magnetization.
Fields Lec 3
Here are some examples of FDA-approved therapeutic devices that use direct current (DC) electric fields:
- Bone growth stimulators - Use pulsed electromagnetic fields or capacitively coupled electric fields to promote bone healing of fractures that are not healing on their own.
- Transcutaneous electrical nerve stimulators (TENS) - Apply electric currents to stimulate nerves for pain relief and muscle rehabilitation.
- Iontophoresis devices - Use low-level electrical currents to drive ionized drug molecules through the skin for local drug delivery.
- Cardioversion/defibrillation devices - Apply controlled electric shocks to the heart to treat irregular heart rhythms like atrial fibrillation or ventricular fibrillation.
Lecture 2 (system overview of c8051 f020) rv01
The document provides an overview of the Silicon Labs C8051F020 microcontroller. It describes the microcontroller's CPU, memory organization, I/O ports, analog and digital peripherals such as ADCs, DACs, and comparators. It also discusses the microcontroller's special function registers used to control and interface with its various peripherals.
Lecture 1 (course overview and 8051 architecture) rv01
This document provides an overview and syllabus for a course on the 8051 microcontroller architecture. The course covers the 8051 architecture, instruction set, programming using assembly and C languages, peripherals, interrupts, timers, serial communication, analog-to-digital converters, and more. The goals are for students to understand the 8051 architecture, develop skills in programming 8051 microcontrollers using different languages, and interface the microcontroller to external components. The course consists of lectures, tutorials, and labs using the Silicon Labs C8051F020 development board.
Lecture 12 (adc) rv01
The document discusses analog to digital converters (ADCs). It describes what an ADC is and how it converts an analog input voltage to a digital output code. It then discusses specifics of the 12-bit ADC0 on the C8051F020 microcontroller, including its input range, output coding, configuration registers, starting conversions, and programming. It provides examples of setting the SAR0 clock frequency, PGA gain, multiplexer channel, and enabling ADC0 to take conversions.
Lecture 11 (dac and comparator) rv01
The document discusses digital-to-analog converters (DACs) and analog comparators. It describes the 12-bit DACs and analog comparators available on the C8051F020 microcontroller. It explains how the DACs can be programmed to output analog voltages through control registers. It also details how the analog comparators work, including their functional block diagram, hysteresis characteristics, and interrupt capabilities.
Lecture 10 (serial communication)
This document provides an overview of serial communication and UART operation. It discusses asynchronous and synchronous serial communication, UART block diagrams, clock requirements, programming UARTs, operation modes, baud rate calculations using timers 1 and 2, and initializing UART0 using timers 1 and 2 to generate baud rates. Equations are provided to calculate the reload values for timers 1 and 2 to generate a desired baud rate given the system clock frequency. Code examples initialize UART0 for 115200 baud communication using timer 1 or timer 2 clock sources.
Lecture 5 (system clock crossbar and gpio) rv012
The document discusses the system clock, watchdog timer, port pins, and crossbar for the C8051F020 microcontroller. It describes initializing the system clock from the internal or external oscillator, configuring the watchdog timer interval and disabling it. It also covers configuring port pin output modes as open-drain or push-pull and digital inputs. Finally, it explains the crossbar's pin assignment priority and registers for configuration.
Lecture 4 (8051 instruction set) rv01
The document summarizes the instruction set of the 8051 microcontroller. It describes the different addressing modes including register, direct, indirect, immediate, relative, absolute, long and indexed addressing. It also explains the various instruction types such as arithmetic, logical, data transfer, boolean and program branching instructions. Examples are provided for different instructions like ADD, MOV, JMP etc. to illustrate how they work and affect processor registers.
Lecture 3 (tool stick platform) rv01
The document describes the ToolStick development platform from Silicon Labs. It consists of a base adapter that provides a USB debug interface and daughter cards with target microcontrollers. The ToolStick platform and Silicon Labs IDE software allow developing and debugging code on the microcontroller. Key features of the ToolStick described include programming and debugging the microcontroller, configuring ports in real-time using the IDE, setting breakpoints, single-stepping code, and viewing variable values while debugging.
Modern control 2
The document discusses concepts related to linear time-invariant systems represented by state-space models. It provides:
1) An overview of desired learning outcomes related to solving state equations and understanding controllability and observability.
2) Details on solving the homogeneous and non-homogeneous state equations, including definitions of zero-state and zero-input responses.
3) The condition for a system to be completely state controllable, which is that the controllability matrix must be of full rank.
More from cairo university (20)
A14 sedra ch 14 advanced mos and bipolar logic circuits
A14 sedra ch 14 advanced mos and bipolar logic circuits
Lecture 1 (course overview and 8051 architecture) rv01
Lecture 1 (course overview and 8051 architecture) rv01
Recently uploaded
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support will integrate with emerging technologies such as augmented reality (AR) and virtual reality (VR) to enhance service delivery. AR-enabled smart glasses or VR environments will provide immersive support experiences, allowing customers to visualize solutions, receive step-by-step guidance, and interact with virtual support agents in real-time. These technologies will bridge the gap between physical and digital experiences, offering innovative ways to resolve issues, demonstrate products, and deliver personalized training and support.
https://www.leewayhertz.com/ai-in-customer-support/#How-does-AI-work-in-customer-support
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Presentation on Food Delivery Systems
This presentation is about Food Delivery Systems and how they are developed using the Software Development Life Cycle (SDLC) and other methods. It explains the steps involved in creating a food delivery app, from planning and designing to testing and launching. The slide also covers different tools and technologies used to make these systems work efficiently.
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Assistant Engineer (Chemical) Interview Questions.pdf
These are interview questions for the post of Assistant Engineer (Chemical)
Butterfly Valves Manufacturer (LBF Series).pdf
We have designed & manufacture the Lubi Valves LBF series type of Butterfly Valves for General Utility Water applications as well as for HVAC applications.
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Height and depth gauge linear metrology.pdf
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
This study Examines the Effectiveness of Talent Procurement through the Imple...
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
AI in customer support Use cases solutions development and implementation.pdf
AI in customer support Use cases solutions development and implementation.pdf
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Assistant Engineer (Chemical) Interview Questions.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
Call Girls Chennai +91-8824825030 Vip Call Girls Chennai
This study Examines the Effectiveness of Talent Procurement through the Imple...
This study Examines the Effectiveness of Talent Procurement through the Imple...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx
EV BMS WITH CHARGE MONITOR AND FIRE DETECTION.pptx