RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...AKBAR TRADING
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
How to write a Welding Procedure Specification (ISO 15614-1Tiago Pereira
Some key aspects of writing welding procedure specifications. A good learning point for people who have no experience in the field, and a good reference for seasoned engineers
Cembre A06-M Copper Cable Lugs 1.5-2.5sqmm - designed to be crimped onto the copper conductor to enable low voltage (LV) cable termination via the crimped lug.
Cembre A06-M - M3, M3.5, M4, M5, M6, M8 stud hole diameters (mm). Recommended crimping tools Cembre HN1.
Cembre 1.5-2.5sqmm LV Copper Cable Lugs - A06M
Cembre Copper Tube Crimping Lugs for Copper Conductors -Specification (CE Approved & UL Listed)
Cembre copper cable lugs are specified to crimp stranded copper conductors to BS6360 Class 2 and Class 5 flexible copper cables, suitable for 600/1000v, 3.3kV and 11kV dry indoor cable termination when installed using suitably calibrated Cembre crimping tool and die sets.
BS4579 Part 3 Standard - Specification for Compression Joints
Cembre cable lugs are short circuit tested and approved to BS4579-3 : 1976 Specification for performance of mechanical and compression joints in electric cable and wire connectors. BS4579 published in August 1976 was replaced by BS EN 61238 - 1 : 2003
Cembre A-M series cable lugs are manufactured from electrolytic copper tube - the dimensions of Cembre copper tube cable crimp lugs are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. Cembre cable lugs are annealed to guarantee optimum ductility which is an absolute necessity for electrical cable connectors which will have to withstand the severe deformation arising when compressed by mechanical or hydraulic crimping tools. Annealing prevents cracking or breaking between the cable lug barrel and palm. Cembre lugs feature an inspection hole to facilitate the insertion of the cable conductor - whist the lug barrel length has been designed to allow easy and accurate positioning of the die sets during the cable crimping operation.
Cembre Copper & Aluminium Cable Crimps, Splices & Connectors - blade terminals, pin terminals, fork terminals, ring terminals, insulated terminals (LSF), narrow palm cable lugs, single hole and two hole cable lugs, transformer lugs, bi-metallic lugs, water-blocked lugs, high voltage lugs and cable splices 11-33kV. Cembre Stainless Steel Cable Glands
Also - Cembre Cable Crimping Tools & Cembre Cable Cutting Tools
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...AKBAR TRADING
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
How to write a Welding Procedure Specification (ISO 15614-1Tiago Pereira
Some key aspects of writing welding procedure specifications. A good learning point for people who have no experience in the field, and a good reference for seasoned engineers
Cembre A06-M Copper Cable Lugs 1.5-2.5sqmm - designed to be crimped onto the copper conductor to enable low voltage (LV) cable termination via the crimped lug.
Cembre A06-M - M3, M3.5, M4, M5, M6, M8 stud hole diameters (mm). Recommended crimping tools Cembre HN1.
Cembre 1.5-2.5sqmm LV Copper Cable Lugs - A06M
Cembre Copper Tube Crimping Lugs for Copper Conductors -Specification (CE Approved & UL Listed)
Cembre copper cable lugs are specified to crimp stranded copper conductors to BS6360 Class 2 and Class 5 flexible copper cables, suitable for 600/1000v, 3.3kV and 11kV dry indoor cable termination when installed using suitably calibrated Cembre crimping tool and die sets.
BS4579 Part 3 Standard - Specification for Compression Joints
Cembre cable lugs are short circuit tested and approved to BS4579-3 : 1976 Specification for performance of mechanical and compression joints in electric cable and wire connectors. BS4579 published in August 1976 was replaced by BS EN 61238 - 1 : 2003
Cembre A-M series cable lugs are manufactured from electrolytic copper tube - the dimensions of Cembre copper tube cable crimp lugs are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. Cembre cable lugs are annealed to guarantee optimum ductility which is an absolute necessity for electrical cable connectors which will have to withstand the severe deformation arising when compressed by mechanical or hydraulic crimping tools. Annealing prevents cracking or breaking between the cable lug barrel and palm. Cembre lugs feature an inspection hole to facilitate the insertion of the cable conductor - whist the lug barrel length has been designed to allow easy and accurate positioning of the die sets during the cable crimping operation.
Cembre Copper & Aluminium Cable Crimps, Splices & Connectors - blade terminals, pin terminals, fork terminals, ring terminals, insulated terminals (LSF), narrow palm cable lugs, single hole and two hole cable lugs, transformer lugs, bi-metallic lugs, water-blocked lugs, high voltage lugs and cable splices 11-33kV. Cembre Stainless Steel Cable Glands
Also - Cembre Cable Crimping Tools & Cembre Cable Cutting Tools
Welding Procedure Specification and Welder approval based on
AWS D.1.1: Structural Steel Welding Code
ASME IX: Welding and Brazing Qualifications
API 1104: Welding of Pipelines
Copper and its alloys as the second (following silver) most electrical conductive metal, due to significantly lower cost is the preferred choice for applications demanding high electrical conductivity. Copper is basic material in variety of high conductivity products including: power transmission cables, communication cables, bus bars, electrical machinery, electrical contacts and connectors as well as a conductive material in a wide range of electronic components. In order to fulfill high electrical proprieties requirements for these applications, copper processing technologies are designed in a more advanced manner than in the case of copper-based construction materials. Basic requirements for copper products intended for electrical purposes include increased chemical purity and tailored microstructure, which have a direct impact on copper electrical properties. On the other hand the design of processing route should provide minimum production costs and number of technological steps.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
Welding Procedure Specification and Welder approval based on
AWS D.1.1: Structural Steel Welding Code
ASME IX: Welding and Brazing Qualifications
API 1104: Welding of Pipelines
Copper and its alloys as the second (following silver) most electrical conductive metal, due to significantly lower cost is the preferred choice for applications demanding high electrical conductivity. Copper is basic material in variety of high conductivity products including: power transmission cables, communication cables, bus bars, electrical machinery, electrical contacts and connectors as well as a conductive material in a wide range of electronic components. In order to fulfill high electrical proprieties requirements for these applications, copper processing technologies are designed in a more advanced manner than in the case of copper-based construction materials. Basic requirements for copper products intended for electrical purposes include increased chemical purity and tailored microstructure, which have a direct impact on copper electrical properties. On the other hand the design of processing route should provide minimum production costs and number of technological steps.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 9.5mm-15.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Barrier Cable Glands (ATEX Certified) for Hazardous Areas
Zone 1, Zone 2, Zone 21, Zone 22 (Flameproof Exd) Cable Termination
CMP PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) barrier gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas - suitable with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.
CMP PX2K barrier cable glands are ATEX certified for use with equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound barrier glands for cable terminations within ATEX hazardous areas areas are supplied with a "universal" reversible armour clamp to suit all types of armoured cable termination - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas.
CMP PXSS2K barrier cable glands are Class I Division 2 ABCD approved for use with non-armoured marine and tray cable (type TC) providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket - the PXSS2K barrier glands are IP68 rated.
CMP PX2K and PXSS2K barrier cable glands provide mechanical cable retention - a combined detachable spacer and compound tube allows the cable to be easily disconnected from the equipment for maintenance. This feature also facilitates remote make off procedures when the barrier termination is to be conducted in confined spaces.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 40 (M40) 1.1/4" NPT Entry Thread Standard, 1.1/2" NPT Optional
Cable Gland Suits Cable Diameters 27.9mm-40.4mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 6.1mm-11.5mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 20 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional
Cable Gland Suits Cable Diameters 12.5mm-20.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 63 (M63) 2.1/2" NPT Entry Thread Standard, 3" NPT Optional
Cable Gland Suits Cable Diameters 54.6mm-65.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 75S (M75) 2.1/2" NPT Entry Thread Standard, 3" NPT Optional
Cable Gland Suits Cable Diameters 59.0mm-72.1mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Explosion proof barrier glands provide a flameproof compound seal, outer sheath seal and universal armour clamp for steel wire armoured (SWA) and galvanised steel braided (GSWB) cable termination. A barrier gland is an Ex d cable gland incorporating a compound filled chamber sealing around the individual cores of the cable to maintain the flameproof integrity of the electrical equipment. A barrier gland must be used where the standard method of cable glanding (elastomeric seals) an Ex cable entry is considered unlikely to maintain the integrity of flameproof electrical equipment and contain an explosion within the electrical enclosures due either to cable construction or degree of explosion risk.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 90 (M90) 3" NPT Entry Thread Standard, 3.1/2" NPT Optional
Cable Gland Suits Cable Diameters 76.2mm-90.4mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 32 (M32) 1" NPT Entry Thread Standard, 1.1/4" NPT Optional
Cable Gland Suits Cable Diameters 23.7mm-33.9mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 25S (M25) 3/4" NPT Entry Thread Standard, 1" NPT Optional
Cable Gland Suits Cable Diameters 14.0mm-22.0mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas)
Cable Gland Size 50 (M50) 2" NPT Entry Thread Standard, 2.1/2" NPT Optional
Cable Gland Suits Cable Diameters 40.4mm-53.1mm
CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access.
Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA)
Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath
CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.
Similar to AXIS Cable glands| AKBAR TRADING EST- SAUDI ARABIA| mail@akbartrading.com (20)
Abb Combiflex Lugs 1.5, Abb Combiflex Lugs 2.5 | AKBAR TRADING EST. JUBAILAKBAR TRADING
Contact sockets, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-A
1MRK 002 136-D
50 g
90 g
Contact pins, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-G
1MRK 002 136-H
60 g
120 g
A cold applied tape which remains plastic over a wide temperature range. It is
non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis,
salts and micro-organisms and highly impermeable to water, water vapour and
gases. For the protection of buried or exposed pipes, rods, cables, valves and
metal fittings from corrosion. Waterproofing of cables and thermal insulation.
Partex identification catalogue 2017 | AKBAR TRADING EST. AKBAR TRADING
PARTEX ensure that all of products meet the same consistent high quality standard, They subject them to a series of exacting tests, both in-house and at
independent test laboratories. This ensures they meet the requirements of the releavnt International Standards, such as BS EN and UL certiication.
In our UK test laboratory they have equipment that enables us to perform mechanical force tests up to 30KN which means that they can test to destruction
our full range of cable terminations, and cable management products.
We are able to provide test reports and calibration certiicates upon request.
We can also perform a moisture content inspection on our range of Nylon products to ensure they are perfectly conditioned, strong, lexible and durable.
In line with our ISO9001 certiication we operate a strict stock rotation system to ensure that all products reach you in perfect condition.
To meet the requirements of our ISO14001 environmental standard, we strive to minimise our impact upon the environment at all stages of our business
activities.
Partex lugs and_connectors_catalogue | AKBAR TRADING EST. AKBAR TRADING
All copper tube terminals have bell mouth entry for ease of cable insertion.
All terminals have inspection holes to check cable is properly inserted before crimping.
Copper tube splices, four hole transformer fixing, long palm, right angle, blank terminals, copper pins, dissimilar copper splices and flag terminals also available on request.
Sizes above 400mm² available on request.
Other Stud sizes available on request.
MATERIAL: High conductivity copper to BS2871
PURITY: > 99.9%
COATING: Bright electro-tin plating to BS 1872
SCHNEIDER CIRCUIT BREAKER
Schneider Electric range of products in Circuit Breakers and Switches: Compact NS < 630A,Compact NS,Compact NSF/NSJ,Compact NG160,Compact
Thermal Magnetic Circuit Breaker, Miniature, Multi 9 C60N Series, 120 VAC
SCHNEIDER ELECTRIC SAUDI ARABIA
SCHNEIDER - STOCK - SAUDI ARABIA- AKBAR TRADINGI c60n circuit_breakers_schnei...AKBAR TRADING
Acti9 iC60N MCBs 2 Pole
iC60N curve B, C, D circuit breakers are multi-standard circuit breakers which combine circuit protection against short-circuit currents and circuit protection against overload currents
เบรกเกอร์,قاطع الدائرة الكهربائية, 电气断路器 , Leistungsschalter
AKBAR TRADING EST| Thomas & Betts Cable Tie TyrapAKBAR TRADING
1.1
8
Premium cable ties with steel locking barb
Characteristics
The single most distinguishing feature of the Ty-Rap
®
cable ties
from Thomas & Betts is the stainless steel locking barb, firmly
anchored inside the tie head (Fig. 1).
It is made from corrosion-proof, antimagnetic steel (Marine
Grade Type 316).
This guarantees a strong and durable locking of the tie even
under the most adverse conditions - humidity, heat, cold, etc.
and is also proof against vibration and external shock.
When applying ties with Thomas & Betts tooling, the excess
end of the tie is automatically cut off and the slight over cut
retracts into the tie, so that there is no risk of injury from
protruding sharp edges. (Fig. 3)
The low-profile design of the head allows secure tying in tight
spaces.
The edges of the head are also rounded off to offer maximum
protection from injury.
The transition from the strap to the head is gradual. This
protects the material against breaking at this most critical
point.
TY523MX - THOMAS & BETTS - Cable Tie, Ty Rap® Self Lock, Nylon| AKBAR TRADING...AKBAR TRADING
Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com. J3. J. Ty-Rap. ®/Ty-Fast. ®. T&B's Ty-Rap® Cable Ties
Thomas & Betts Key Products:
Ty-Rap Cable Ties
Ty-Met Cable Management Products
Cable Conduits
Cable Accessories
Akbar trading splicing_kit_raychem_te_connectivityAKBAR TRADING
RSTI-58 Separable Connection
CRSM Heat-shrinkable
Category 2 Catalog
HVBT Busbar Insulation Tape
RSTI-6952 Separable Connection
low voltage medium voltage high voltage termination
ALL RAYCHEM PRODUCTS ARE APPROVED BY SAUDI ARAMCO / SEC / SABIC / ROYAL COMMISSION.
Akbar trading splicing_kit_loadbreak_elbow_raychem_te_connectivityAKBAR TRADING
ENERGY /// HIGH VOLTAGE CABLE ACCESSORIES UP TO 245 KV
RAYCHEM
HIGH VOLTAGE
CABLE ACCESSORIES
UP TO 245 KV
Heat-Shrinkable Terminations (IHVT-H/ OHVT-H/ LHVT-H)
10
Heat-Shrinkable Terminations for DC Filter Cables (FCEV)
14
Outdoor Terminations Composite (OHVT-C)
17
Outdoor Terminations Porcelain (OHVT-P)
22
Outdoor Terminations Dry-type (OHVT-D)
27
Add-On Kits for Outdoor Terminations
Heat-Shrinkable Joints (EHVS-H)
46
One Piece Joints (EHVS-S)
48
Three Piece Joints (EHVS-T)
51
Fibre-Optic Add-On Kit for HV Cable Joints
How to Use AI to Write a High-Quality Article that Ranksminatamang0021
In the world of content creation, many AI bloggers have drifted away from their original vision, resulting in low-quality articles that search engines overlook. Don't let that happen to you! Join us to discover how to leverage AI tools effectively to craft high-quality content that not only captures your audience's attention but also ranks well on search engines.
Disclaimer: Some of the prompts mentioned here are the examples of Matt Diggity. Please use it as reference and make your own custom prompts.
Monthly Social Media News Update May 2024Andy Lambert
TL;DR. These are the three themes that stood out to us over the course of last month.
1️⃣ Social media is becoming increasingly significant for brand discovery. Marketers are now understanding the impact of social and budgets are shifting accordingly.
2️⃣ Instagram’s new algorithm and latest guidance will help us maintain organic growth. Instagram continues to evolve, but Reels remains the most crucial tool for growth.
3️⃣ Collaboration will help us unlock growth. Who we work with will define how fast we grow. Meta continues to evolve their Creator Marketplace and now TikTok are beginning to push ‘collabs’ more too.
Videos are more engaging, more memorable, and more popular than any other type of content out there. That’s why it’s estimated that 82% of consumer traffic will come from videos by 2025.
And with videos evolving from landscape to portrait and experts promoting shorter clips, one thing remains constant – our brains LOVE videos.
So is there science behind what makes people absolutely irresistible on camera?
The answer: definitely yes.
In this jam-packed session with Stephanie Garcia, you’ll get your hands on a steal-worthy guide that uncovers the art and science to being irresistible on camera. From body language to words that convert, she’ll show you how to captivate on command so that viewers are excited and ready to take action.
Come learn how YOU can Animate and Illuminate the World with Generative AI's Explosive Power. Come sit in the driver's seat and learn to harness this great technology.
Most small businesses struggle to see marketing results. In this session, we will eliminate any confusion about what to do next, solving your marketing problems so your business can thrive. You’ll learn how to create a foundational marketing OS (operating system) based on neuroscience and backed by real-world results. You’ll be taught how to develop deep customer connections, and how to have your CRM dynamically segment and sell at any stage in the customer’s journey. By the end of the session, you’ll remove confusion and chaos and replace it with clarity and confidence for long-term marketing success.
Key Takeaways:
• Uncover the power of a foundational marketing system that dynamically communicates with prospects and customers on autopilot.
• Harness neuroscience and Tribal Alignment to transform your communication strategies, turning potential clients into fans and those fans into loyal customers.
• Discover the art of automated segmentation, pinpointing your most lucrative customers and identifying the optimal moments for successful conversions.
• Streamline your business with a content production plan that eliminates guesswork, wasted time, and money.
The digital marketing industry is changing faster than ever and those who don’t adapt with the times are losing market share. Where should marketers be focusing their efforts? What strategies are the experts seeing get the best results? Get up-to-speed with the latest industry insights, trends and predictions for the future in this panel discussion with some leading digital marketing experts.
Core Web Vitals SEO Workshop - improve your performance [pdf]Peter Mead
Core Web Vitals to improve your website performance for better SEO results with CWV.
CWV Topics include:
- Understanding the latest Core Web Vitals including the significance of LCP, INP and CLS + their impact on SEO
- Optimisation techniques from our experts on how to improve your CWV on platforms like WordPress and WP Engine
- The impact of user experience and SEO
Mastering Local SEO for Service Businesses in the AI Era is tailored specifically for local service providers like plumbers, dentists, and others seeking to dominate their local search landscape. This session delves into leveraging AI advancements to enhance your online visibility and search rankings through the Content Factory model, designed for creating high-impact, SEO-driven content. Discover the Dollar-a-Day advertising strategy, a cost-effective approach to boost your local SEO efforts and attract more customers with minimal investment. Gain practical insights on optimizing your online presence to meet the specific needs of local service seekers, ensuring your business not only appears but stands out in local searches. This concise, action-oriented workshop is your roadmap to navigating the complexities of digital marketing in the AI age, driving more leads, conversions, and ultimately, success for your local service business.
Key Takeaways:
Embrace AI for Local SEO: Learn to harness the power of AI technologies to optimize your website and content for local search. Understand the pivotal role AI plays in analyzing search trends and consumer behavior, enabling you to tailor your SEO strategies to meet the specific demands of your target local audience. Leverage the Content Factory Model: Discover the step-by-step process of creating SEO-optimized content at scale. This approach ensures a steady stream of high-quality content that engages local customers and boosts your search rankings. Get an action guide on implementing this model, complete with templates and scheduling strategies to maintain a consistent online presence. Maximize ROI with Dollar-a-Day Advertising: Dive into the cost-effective Dollar-a-Day advertising strategy that amplifies your visibility in local searches without breaking the bank. Learn how to strategically allocate your budget across platforms to target potential local customers effectively. The session includes an action guide on setting up, monitoring, and optimizing your ad campaigns to ensure maximum impact with minimal investment.
Financial curveballs sent many American families reeling in 2023. Household budgets were squeezed by rising interest rates, surging prices on everyday goods, and a stagnating housing market. Consumers were feeling strapped. That sentiment, however, appears to be waning. The question is, to what extent?
To take the pulse of consumers’ feelings about their financial well-being ahead of a highly anticipated election, ThinkNow conducted a nationally representative quantitative survey. The survey highlights consumers’ hopes and anxieties as we move into 2024. Let's unpack the key findings to gain insights about where we stand.
AI-Powered Personalization: Principles, Use Cases, and Its Impact on CROVWO
In today’s era of AI, personalization is more than just a trend—it’s a fundamental strategy that unlocks numerous opportunities.
When done effectively, personalization builds trust, loyalty, and satisfaction among your users—key factors for business success. However, relying solely on AI capabilities isn’t enough. You need to anchor your approach in solid principles, understand your users’ context, and master the art of persuasion.
Join us as Sarjak Patel and Naitry Saggu from 3rd Eye Consulting unveil a transformative framework. This approach seamlessly integrates your unique context, consumer insights, and conversion goals, paving the way for unparalleled success in personalization.
The Secret to Engaging Modern Consumers: Journey Mapping and Personalization
In today's digital landscape, understanding the customer's journey and delivering personalized experiences are paramount. This masterclass delves into the art of consumer journey mapping, a powerful technique that visualizes the entire customer experience across touchpoints. Attendees will learn how to create detailed journey maps, identify pain points, and uncover opportunities for optimization. The presentation also explores personalization strategies that leverage data and technology to tailor content, products, and experiences to individual customers. From real-time personalization to predictive analytics, attendees will gain insights into cutting-edge approaches that drive engagement and loyalty.
Key Takeaways:
Current consumer landscape; Steps to mapping an effective consumer journey; Understanding the value of personalization; Integrating mapping and personalization for success; Brands that are getting It right!; Best Practices; Future Trends
The session includes a brief history of the evolution of search before diving into the roles technology, content, and links play in developing a powerful SEO strategy in a world of Generative AI and social search. Discover how to optimize for TikTok searches, Google's Gemini, and Search Generative Experience while developing a powerful arsenal of tools and templates to help maximize the effectiveness of your SEO initiatives.
Key Takeaways:
Understand how search engines work
Be able to find out where your users search
Know what is required for each discipline of SEO
Feel confident creating an SEO Plan
Confidently measure SEO performance
[Google March 2024 Update] How To Thrive: Content, Link Building & SEOSearch Engine Journal
March 2024 disrupted the SEO industry. Websites were deindexed, and manual penalties were delivered—all to produce more helpful, more trustworthy search results.
How did your website fare?
Watch us as we delve into the seismic shifts brought about by Google's March 2024 updates and explore strategies to not just survive, but thrive in this dynamic digital landscape.
You’ll learn:
- How to create content that is valuable to users (not just search engines) using E-E-A-T.
- How to build links that can boost rankings and withstand algorithm updates.
- Best practices for content creation and link building so you can thrive during algorithm updates.
With Vince Ramos, we'll examine the implications of the latest algorithm changes on content creation, link building, and SEO practices, and offer actionable insights from businesses like yours that have remained steadfast amidst the volatility.
Using real-life case studies, we’ll also show you the effectiveness of manual link building techniques and person-first content strategies.
Whether you're a seasoned SEO professional, a budding content creator, or anyone in between, this webinar will help you weather the changes in Google's algorithms and capitalize on them for sustained success.
Check out this webinar and unlock the secrets to thriving in the new Google era.
It's another new era of digital and marketers are faced with making big bets on their digital strategy. If you are looking at modernizing your tech stack to support your digital evolution, there are a few can't miss (often overlooked) areas that should be part of every conversation. We'll cover setting your vision, avoiding siloes, adding a democratized approach to data strategy, localization, creating critical governance requirements and more. Attendees will walk away with actions they can take into initiatives they are running today and consider for the future.
3. 2
AxisoffersawiderangeofIndustrialCableGlandsforindoorandoutdooruse.
The Cable glands meet the performance requirements of BS 6121 : Part I / BS EN 50262 and are manufactured in
brassto BS2874 standard.
EntrythreadsareavailableinMetric,PG,NPT&Imperialsizes.
Axis, by translating its Technological expertise, Manufacturing Process and Product Application to innovative
solutionsensurescompletecustomersatisfaction
4. 3
Axis glands are being used worldwide and are supported by a wide network of distributors and wholesalers. Owing to
our good track record of reliable supplies our customer base has spanned major sectors like Industrial, Power and Oil
fields,justtonameafew.
Axishasbeendedicatedtoprovideitscustomers,solutions,addingvaluetotheirbusinessandalsodevelopproducts
aspertheirspecificrequirements,fromshorttolargeproductionrun.
This catalogue has been compiled and logically structured enabling the original equipment manufacturers, electrical
contractors,distributors,wholesalersandretailerstofindproductinformationeasilyandefficiently.
5. Brass indoor and outdoor cable gland highly suitable for all types of
unarmoured cables, plastic or rubber sheathed cables. This gland provides
a seal on outer sheath.
Recommended to use PVC shroud for additional ingress protection.
A1/A2
BS 6121 : Part I : 1989
IP66
Brass
Plain Brass or Nickel Plated
Thermoplastic Elastomer
Unarmoured
Displacement Type
Outer Sheath
Type
Design Specification
Ingress protection
Gland Material
Finish
Seal Material
Cable Type
Sealing Technique
Sealing Area
TECHNICAL DATA
04
INDUSTRIALCABLEGLANDS
A1/A2 Industrial Cable Gland
E
B
D
A
C
AAG0016B
AAG0020SSB
AAG0020SB
AAG0020LB
AAG0025SB
AAG0025LB
AAG0032LB
AAG0040LB
AAG0050SB
AAG0050LB
AAG0063SB
AAG0063LB
AAG0075SB
AAG0075LB
AAG0090LB
AAG0100LB
E- CODE
21.30
23.60
23.60
26.85
30.50
35.50
41.30
47.00
55.00
59.95
64.75
69.85
78.75
84.60
102.60
119.10
Across Flat
'E’ Max
6. TECHNICAL DATA
BW KNURLING TYPE
BS 6121 : Part I : 1989
IP3X
Brass
Plain Brass or Nickel Plated
Steel Wire Armour
Two Part Armour Lock
Type
Design Specification
Ingress Protection
Gland Material
Finish
Cable Type
Armour Clamping
05
INDUSTRIALCABLEGLANDS
Brass indoor glands most suitable for single wire armoured, plastic or
rubber sheathed cable.
Earth tags to be use for earth continuity.
Recommended to use with shroud for additional ingress protection.
BW Industrial Cable Gland
B
E
D
A
C
21.00
21.00
23.40
33.50
40.10
50.30
56.65
62.70
76.20
92.70
Across Flat
'E’ Max
MOHD. BIN AHMED AKBAR TRADING EST.
(Electrical, Automation & Instrumentation)
Al Sahaba Street | P.O Box 30073 | Jubail 31951 | Kingdom of Saudi Arabia
Tel: 00966 (0) 13 3635225, 13 3618081 | Fax: 00966 (0) 13 363 3883 |
mail@akbartrading.com | www.akbartrading.com
7. TECHNICAL DATA
BWL
BS 6121 : Part I : 1989
IP3X
Brass
Plain Brass or Nickel Plated
Steel Wire Armour
Three Part Armour Lock
Type
Design Specification
Ingress Protection
Gland Material
Finish
Cable Type
Armour Clamping
4
06
Brass indoor glands most suitable for single wire armoured, plastic or rubber sheathed cable.
Lockring provided for additional grip to the armour.
Earth tags to be use for earth continuity.
BWL glands are also supplied with integral earth facilities.
Recommended to use with shroud for additional ingress protection.
BWL Heavy Duty Industrial Cable Gland
B
E
D
A
C
BWL0016B
BWL0020SB
BWL0020LB
BWL0025SB
BWL0025LB
BWL0032LB
BWL0040SB
BWL0040LB
BWL0050SB
BWL0050LB
BWL0063SB
BWL0063LB
BWL0075SB
BWL0075LB
BWL0090B
E- CODE
21.30
23.60
25.40
31.10
34.00
40.40
44.90
48.70
57.40
61.00
70.10
74.80
84.30
90.10
105.30
Across Flat
'E’ Max
INDUSTRIALCABLEGLANDS
8. TECHNICAL DATA
Type
Design Specification
Ingress Protection
Finish
Gland Material
Seal Material
Cable Type
Armour Clamping
Sealing Technique
Sealing Area
CW
BS 6121 : Part I : 1989
IP 66
Thermoplastic Elastomer
Plain Brass or Nickel Plated
Steel Wire Armour
Three Part (With Lock Nut)
Compression Type
Outer Sheath
Brass
07
Brass indoor and outdoor gland most popularly used with single wire armoured, plastic or
rubber sheathed cable. Terminates and secured cable armouring and outer seal grips
sheath of cable thus ensuring mechanical strength and earth continuity.
Earth tags to be use for earth continuity.
CW brass glands are also supplied with integral earth facilities.
Recommended to use PVC shroud for additional ingress protection.
CW Industrial Cable Gland
B
D
E
C
A
CWG0016B
CWG0020SB
CWG0020LB
CWG0025SB
CWG0025LB
CWG0032LB
CWG0040SB
CWG0040LB
CWG0050SB
CWG0050LB
CWG0063SB
CWG0063LB
CWG0075SB
CWG0075LB
CWG0090LB
E- CODE
24.20
24.00
27.17
32.75
34.30
42.90
49.30
50.80
61.70
63.75
73.90
78.50
87.40
96.00
105.30
Across Flat
'E’ Max
INDUSTRIALCABLEGLANDS
9. TECHNICAL DATA
CZ
BS 6121 : Part 1 : 1989
IP 66
Brass
Plain Brass or Nickel Plated
Thermoplastic Elastomer
Steel Tape Armour
Three Part (With Lock Nut)
Compression Type
Outer Sheath
Type
Design Specification
Ingress protection
Gland Material
Finish
Seal Material
Cable Type
Armour Clamping
Sealing Technique
Sealing Area
4
08
Brass gland suitable for steel tape armoured, plastic or rubber sheathed cables.
Terminates and secure cable armouring and outer seal grips sheath of cable
thus ensuring mechanical strength and earth continuity.
CZ brass glands are also supplied with integral earth facilities.
Earth tags to be use for earth continuity.
Recommended to use PVC shroud for additional ingress protection.
CZ Industrial Cable Gland
B
E
C
A
D
CZG0016B
CZG0020SB
CZG0020LB
CZG0025SB
CZG0025LB
CZG0032B
CZG0040SB
CZG0040LB
CZG0050SB
CZG0050LB
CZG0063SB
CZG0063LB
CZG0075SB
CZG0075LB
CZG0090B
E- CODE
24.20
24.00
27.17
32.75
34.30
42.90
49.30
50.80
61.70
63.75
73.90
78.50
87.40
96.00
105.30
Across Flat
'E’ Max
INDUSTRIALCABLEGLANDS
10. TECHNICAL DATA
Type
Design Specification
Ingress Protection
Finish
Gland Material
Seal Material
Cable Type
Armour Clamping
Sealing Technique
Sealing Area (s)
E1W
BS 6121 : Part I : 1989
IP 66
Thermoplastic Elastomer
Plain Brass or Nickel Plated
Steel Wire Armour
Three Part Armour Lock
Compression & Displacement Type
Inner & Outer Sheath
Brass
4
09
Brass indoor and outdoor cable glands highly suitable for single wire armoured,
plastic or rubber sheathed cables. Provides grip to the cable with outer and inner
seals. Used popularly in most climatic conditions weatherproof and waterproof.
Earth tags to be use for earth continuity.
E1W brass glands are also supplied with integral earth facilities.
Recommended to use PVC shroud for additional ingress protection.
E1W Industrial Cable Gland
E1W0016B
E1W0020SB
E1W0020LB
E1W0025SB
E1W0025LB
E1W0032LB
E1W0040SB
E1W0040LB
E1W0050SB
E1W0050LB
E1W0063SB
E1W0063LB
E1W0075SB
E1W0075LB
E1W0090B
E- CODE
24.10
24.10
27.17
32.75
35.85
42.90
49.30
50.80
61.70
63.75
73.90
78.50
87.40
96.00
105.30
Across Flat
'E’ Max
B
D
E
C
A
INDUSTRIALCABLEGLANDS
11. TECHNICAL DATA
E1Z
BS 6121 : Part 1 : 1989
IP 66
Brass
Plain Brass or Nickel Plated
Thermoplastic Elastomer
Steel Tape Armour
Three Part Armour Lock
Compression & Displacement Type
Inner & Outer Sheath
Type
Design Specification
Ingress protection
Gland Material
Finish
Seal Material
Cable Type
Armour Clamping
Sealing Technique
Sealing Area (s)
4
10
Brass indoor and outdoor cable glands suitable for steel tape armoured,
plastic or rubber sheathed cable. Provides grip to the cable with outer and
inner seals. Used in most climatic conditions weatherproof and waterproof.
Earth tags to be use for earth continuity.
E1Z brass glands are also supplied with integral earth facilities.
Recommended to use PVC shroud for additional ingress protection.
E1Z Industrial Cable Gland
E1Z0016B
E1Z0020SB
E1Z0020LB
E1Z0025SB
E1Z0025LB
E1Z0032B
E1Z0040SB
E1Z0040LB
E1Z0050SB
E1Z0050LB
E1Z0063SB
E1Z0063LB
E1Z0075SB
E1Z0075LB
E1Z0090B
E- CODE
24.10
24.10
27.17
32.75
35.85
42.90
49.30
50.80
61.70
63.75
73.90
78.50
87.40
96.00
105.30
Across Flat
'E’ Max
B
D
E
C
A
INDUSTRIALCABLEGLANDS
12. TECHNICAL DATA
CXT
BS 6121 : Part 1 : 1989
IP 66
Brass
Plain Brass or Nickel Plated
Thermoplastic Elastomer
Braided Armoured Type
Displacement Type
Outer Sheath
Type
Design Specification
Ingress protection
Gland Material
Finish
Seal Material
Cable Type
Sealing Technique
Sealing Area
4
11
Brass indoor and outdoor cable gland suitable for braided type, plastic
or rubber sheathed cables.
This gland provides seal on outer sheath.
Recommended to use with PVC shroud for additional ingress protection.
armoured
CXT Industrial Cable Gland
CXT0016B
CXT0020SSB
CXT0020SB
CXT0020B
CXT0025LB
CXT0032LB
CXT0040LB
CXT0050SB
CXT0050LB
E- CODE
21.3
23.6
23.6
26.85
30.5
41.3
47
55
59.95
Across Flat
'E’ Max
E
B
C
A
D
INDUSTRIALCABLEGLANDS
13. 4
12
LOCKNUTS
Locknuts are recommended to use with cable glands to secure it to a gland plate or to equipment.
It is highly recommended to use brass locknut with gland for all the atmospheric conditions.
Sizes available from 16mm to 90mm
(Imperial and PG sizes also available)
EARTH TAGS
Earth tags are installed between the cable gland and equipment to provide earth continuity as
specified in BS 6121 Part 5, 1993
Sizes available from 16mm to 90mm
PVC SHROUD
The shroud are recommended to use with all cable glands to provide additional ingress protection and
to minimize the risk of dirt or any foreign substance gathering around gland body.
PVC Shrouds are denoted by gland reference number and are compatible with each glands size.
GLAND ACCESSORIES
GLAND KIT
Axis provides ready to use gland kit which
consists of all the basic components
required to terminate the cable to the
equipments.
See kit details below.
Kit Details
Size
20 - 25
32 - 90
Component / Kit
Glands, Locknuts, Earthtags, PVC Shrouds and Screws - 2 Ea.
Gland, Locknut, Earthtag, PVC Shroud and Screw - 1 Ea.
Note: For A1/A2 Glands Earth Tag not required.
INDUSTRIALCABLEGLANDS
15. WIPING GLAND
Material : Brass
Finish : Natural
4
14
Dimention in mm
A B C D E F G H J R
Dia over metal
sheath of cable
(mm)
Gland
Size
X
Y
Z
E - Code
AWGX
AWGY
AWGZ
12 to 51
25 to 78
25 to 94
137
155
195
90
95
140
60
89
108
19
32
32
90
114
190
90
123
100
66
95
-
66
86
-
12
14
14
12
14
-
6 HOLES ØJ
B
E
F
G
E
F
H
R
4 HOLES ØJ
Gland Size X & Y
A
B
10
12.5
25
ØC3
ØD
Gland Size Z
C
25
A
4
11
12.5
Ø
ØD
INDUSTRIALCABLEGLANDS
16. FITTINGS FOR WIPING GLANDS
Insulating Plates
Insulating Bush
Material : Thermoplastic Elastomer or Cork
Material : Neoprene
ØA
ØC
ØB
D
E
Armour Clamp
Material : M.S Strip
Finish : Electro Zinc Plated
A
25
ØC
ØA
6 HOLES ØG
ØH
B
D
C
E
ØH
ØG
4
15
Gland
Size
Insulating
Plate
Insulating
Bush
X
Y
Z
PX
PY
PZ
A
B
B
Dimention in mm
A B C D E
Insulating
Bush
A
B
15
18
11.2
14
22
28
28
28
10
10
Dimention in mm
A B C
Gland
Size
X
Y
Z
140
175
190
108
145
160
73
103
123
E - Code
AACX
AACY
AACZ
Dimension in mm
A B C D E G H
Insulating
Plate
PX
PY
PZ
-
-
190
90
114
-
66
86
-
90
123
-
66
95
-
14
16
16
60
90
108
E - Code
APX50002
APY50001
APZ50003
INDUSTRIALCABLEGLANDS
17. CONDUIT FITTINGS
Male - Female Bushes
Material:Brass as per BS 2874
Finish:Brass as natural.
Sizes:Metric : 20mm to 50mm
(Short and Long patterns)
Adaptors
Material:Brass as per BS 2874
Finish:Brass as natural or Nickel plated.
Sizes:Metric : 12mm to 50mm
Imperial: 1/2” to 2”
Also available with swivel type fittings.
Flexible Conduit PVC Coated
As per BS 731
Material:G. I. Strip
Coating:Temperature resistant PVC
IP Rating:IP 65 or IP 50 with standard fittings
Working Temperatures : Min : -20 C Max : +70 C° °
Colour:Black
Sizes: Metric : 12mm to 50mm
Imperial : 1/2” to 2”
Flexible Conduit Nylon Coated
As per BS 731
Material:G. I. Strip
Coating:Nylon
IP Rating:IP 65 or IP 50 with standard fittings
Working Temperatures : Min : -30 C Max : +110 C° °
Colour:Black
Sizes: Metric : 12mm to 50mm
Imperial : 1/2” to 2”
4
16
INDUSTRIALCABLEGLANDS
18. INGRESS PROTECTION INDEX
50mm
12.5mm
2.5mm
1mm
Protected against solid
objects larger than
50 mm diameter
Protected against solid
objects larger than
12.5 mm diameter
Protected against solid
objects larger than
2.5 mm diameter
Protected against solid
objects larger than
1 mm diameter
Protected against dust
Completely protected
against dust (Dust-tight)
1
2
3
4
5
6
Protection Against Solids.1st Digit :
Protected against drops of
water falling vertically
Protected against drops of
water falling at up to 15
from the vertical
°
Protected against rain
at up to 60 from
the vertical
°
Protected against splashing
of water from all directions
Protected against jets of
water from all directions
Protected against projections
of water from all directions
Protected against the
effect of immersion
Protected against the
effects of submersion
1
2
3
4
5
7
6
8
2nd Digit : Protection Against Solids.
15cm
1m
4
17
IP
X
0
No Test
No Protection
IP
X
0
No Test
No Protection
INDUSTRIALCABLEGLANDS