Flexible welding cable is designed for secondary side wiring and connecting welding clamps for welding machines. It has a single core structure made of soft wire wrapped in heat-resistant polyester film for insulation and an outer rubber sheath for protection. It is suitable for voltages not exceeding 200V DC or 400V peak and can operate at temperatures up to 65°C. Various models and specifications are provided with conductor cross-sections ranging from 10mm2 to 120mm2.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Get the right information about brass cable gland. Vatsalya Metal, Brass cable gland manufacturers and exporters gives some essential information about cable glands types and how to but it.
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Get the right information about brass cable gland. Vatsalya Metal, Brass cable gland manufacturers and exporters gives some essential information about cable glands types and how to but it.
Cable Glands, Connectors and Accessories Exd/Exe
PX2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland
E1FW Globally Approved, Explosive
Atmosphere Cable Gland
For all types of Steel & Aluminium Wire
Armoured Cables
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service Box
T&D distribute Ellis Patents cable cleats providing safety critical support to vital cable circuits. Cable cleats must withstand peak short circuit forces generated by the actual cable installation - Ellis Patents 3rd party certified cable cleats provide peace of mind containment of low and high voltage cables.
Ellis Patents are global leaders in the innovation and manufacture of nylon, aluminium and stainless steel cable cleats - EP satisfy the operational requirements of the construction, oil, gas, rail, utilities, wind energy and power generation industries.
Holding Power is Ellis Patents guarantee that EP Cable Cleats will contain dangerous short circuit forces - protecting your people, power and plant. Without fail - specify Ellis Patents Cable Cleats.
Alpha cable cleats contain single core power cables in trefoil formation - lightweight, fast to install, strong and robust with unique design providing labour savings. Short circuit withstand test : 31.4kA RMS (72.4kA peak).
Vulcan cable cleats for single, trefoil, quadrafoil and bundled cable installations - suits LV, 11kV-33kV BS6622 and BS7870 Triplex high voltage cables.
Made from stainless steel for non corrosive, high strength and permanent utility cable cleating with compact design.
Ellis Patents are a leading voice in the campaign to have cable cleats reclassified as short-circuit protection devices. A move that would mean cable cleats would be placed on a parallel with fuses and circuit breakers. "This reclassification makes absolute sense. In the event of a cable fault, the forces between cables reach their peak in the first quarter cycle, which is the point that cable cleats earn their crust. In contrast, circuit breakers typically interrupt the fault after 3 or even 5 cycles by which time, if the cable cleats are underspecified, the cables will no longer be secure, but will be putting vital electrical installations and lives at unnecessary risk," says Paul Nolan UK Sales Manager, EP.
EXD Hazardous Area Barrier Glands from Flexicon are manufactured from nickel plated brass with a nylon seal, to an IP rating of IP66, IP67, IP68 (5bar) and IP69K - ATEX certified barrier glands are suitable for use with Flexicon flexible conduit (liquid tight types) in Zone 1, Zone 2, Zone 21 and Zone 22.
EXD flameproof barrier glands are suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, when used with the Flexicon range of liquid-tight flexible conduits.
Hazardous Area Barrier Gland (ATEX) Certified
• High mechanical strength
• Suitable for threaded entries
• Operating temperature of -60oC to +85oC
• Two-part epoxy solid-setting putty, gloves and mixing instructions
ATEX barrier glands for indoor or outdoor use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of cables housed in Liquid Tight flexible conduit systems. ATEX barrier glands are suitable for knockouts or threaded entries. Nickel plated brass compression fitting comprising of body, nut, earthing ferrule, nylon compression seal and compound barrier. The compound barrier seals around the cable conductors for hazardous area cable glanding on conduit systems. The earthing ferrule is manufactured in machined nickel plated brass to facilitate easy assembly and re-use. Also ensures high mechanical strength and electrical continuity.
Flexicon flexible conduits with ATEX flameproof barrier glands (LTP-EXD flameproof barrier glands) are suitable for use with Flexicon LTP, LTPHC, LTPUL, LTPSS and LTPPU conduits.
Craig and Derricott Isolators
Isolation Equipment and Switch Disconnectors
Moulded Plastic Isolators & Switch Disconnectors IP65 20A-63A
Mild Steel Isolators & Switch Disconnectors IP65 20A-63A
Stainless Steel Isolators & Switch Disconnectors IP65 20A-63A
Die Cast Isolators & Switch Disconnectors IP65 20A-63A
Sheet Steel Isolators & Switch Disconnectors IP41 32A-630A
Sheet Steel Isolators & Switch Disconnectors IP65 32A-1000A
ATEX Zone 22 Isolators& Switch Disconnectors Cat 3D
Fire Rated Isolators & Switch Disconnectors 20A-125A
Isolation Equipment and Switch Disconnectors
Craig & Derricott Section 12 London Underground Isolators
Craig & Derricott Stainless Steel Water Utility Isolators
Lucy Lighting Street Lighting Trojan Isolators
Switch Disconnectors (Isolators) provide the means to safely disconnect or isolate an item of electrical equipment from the power supply - primarily designed to provide a means of local isolation when an elecrical item may need maintenance or repair. Switch Disconnectors also i) provide an effective clearance between the supply and the electrical load appropriate to the voltage applied, ii) provide a means of "locking off" (padlocking), iii) provide true indication of contact state, iv) provide a safe electrical disconnection from the power supply even under fault conditions.
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Cable Glands, Connectors and Accessories Exd/Exe
PX2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland
E1FW Globally Approved, Explosive
Atmosphere Cable Gland
For all types of Steel & Aluminium Wire
Armoured Cables
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service Box
T&D distribute Ellis Patents cable cleats providing safety critical support to vital cable circuits. Cable cleats must withstand peak short circuit forces generated by the actual cable installation - Ellis Patents 3rd party certified cable cleats provide peace of mind containment of low and high voltage cables.
Ellis Patents are global leaders in the innovation and manufacture of nylon, aluminium and stainless steel cable cleats - EP satisfy the operational requirements of the construction, oil, gas, rail, utilities, wind energy and power generation industries.
Holding Power is Ellis Patents guarantee that EP Cable Cleats will contain dangerous short circuit forces - protecting your people, power and plant. Without fail - specify Ellis Patents Cable Cleats.
Alpha cable cleats contain single core power cables in trefoil formation - lightweight, fast to install, strong and robust with unique design providing labour savings. Short circuit withstand test : 31.4kA RMS (72.4kA peak).
Vulcan cable cleats for single, trefoil, quadrafoil and bundled cable installations - suits LV, 11kV-33kV BS6622 and BS7870 Triplex high voltage cables.
Made from stainless steel for non corrosive, high strength and permanent utility cable cleating with compact design.
Ellis Patents are a leading voice in the campaign to have cable cleats reclassified as short-circuit protection devices. A move that would mean cable cleats would be placed on a parallel with fuses and circuit breakers. "This reclassification makes absolute sense. In the event of a cable fault, the forces between cables reach their peak in the first quarter cycle, which is the point that cable cleats earn their crust. In contrast, circuit breakers typically interrupt the fault after 3 or even 5 cycles by which time, if the cable cleats are underspecified, the cables will no longer be secure, but will be putting vital electrical installations and lives at unnecessary risk," says Paul Nolan UK Sales Manager, EP.
EXD Hazardous Area Barrier Glands from Flexicon are manufactured from nickel plated brass with a nylon seal, to an IP rating of IP66, IP67, IP68 (5bar) and IP69K - ATEX certified barrier glands are suitable for use with Flexicon flexible conduit (liquid tight types) in Zone 1, Zone 2, Zone 21 and Zone 22.
EXD flameproof barrier glands are suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, when used with the Flexicon range of liquid-tight flexible conduits.
Hazardous Area Barrier Gland (ATEX) Certified
• High mechanical strength
• Suitable for threaded entries
• Operating temperature of -60oC to +85oC
• Two-part epoxy solid-setting putty, gloves and mixing instructions
ATEX barrier glands for indoor or outdoor use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of cables housed in Liquid Tight flexible conduit systems. ATEX barrier glands are suitable for knockouts or threaded entries. Nickel plated brass compression fitting comprising of body, nut, earthing ferrule, nylon compression seal and compound barrier. The compound barrier seals around the cable conductors for hazardous area cable glanding on conduit systems. The earthing ferrule is manufactured in machined nickel plated brass to facilitate easy assembly and re-use. Also ensures high mechanical strength and electrical continuity.
Flexicon flexible conduits with ATEX flameproof barrier glands (LTP-EXD flameproof barrier glands) are suitable for use with Flexicon LTP, LTPHC, LTPUL, LTPSS and LTPPU conduits.
Craig and Derricott Isolators
Isolation Equipment and Switch Disconnectors
Moulded Plastic Isolators & Switch Disconnectors IP65 20A-63A
Mild Steel Isolators & Switch Disconnectors IP65 20A-63A
Stainless Steel Isolators & Switch Disconnectors IP65 20A-63A
Die Cast Isolators & Switch Disconnectors IP65 20A-63A
Sheet Steel Isolators & Switch Disconnectors IP41 32A-630A
Sheet Steel Isolators & Switch Disconnectors IP65 32A-1000A
ATEX Zone 22 Isolators& Switch Disconnectors Cat 3D
Fire Rated Isolators & Switch Disconnectors 20A-125A
Isolation Equipment and Switch Disconnectors
Craig & Derricott Section 12 London Underground Isolators
Craig & Derricott Stainless Steel Water Utility Isolators
Lucy Lighting Street Lighting Trojan Isolators
Switch Disconnectors (Isolators) provide the means to safely disconnect or isolate an item of electrical equipment from the power supply - primarily designed to provide a means of local isolation when an elecrical item may need maintenance or repair. Switch Disconnectors also i) provide an effective clearance between the supply and the electrical load appropriate to the voltage applied, ii) provide a means of "locking off" (padlocking), iii) provide true indication of contact state, iv) provide a safe electrical disconnection from the power supply even under fault conditions.
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
This webinar will explain concept of International ACH, how it works, rationale for choosing it and how it differs from US domestic ACH. It will also discuss what International Payments Framework Association (IPFA) is and how it addresses International ACH issues. Instructor will cover the relevance of customer benefits and value proposition regarding International ACH and why it may be preferred over wire transfers.For More Details:
Email: david@grcts.com
Tel: +1-248-233-2049
Web: www.grcts.com
Batra Henlay Cables provides superior quality copper flexible wires, control instrumentation, telecommunication cables moreover high defined coaxial cables in various forms of insulation to the power, telecommunication, and energy industries.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Nuhas is the first and only cable producer in the Middle East to have been certified by DNV, Norway as capable of manufacturing power, control and instrumentation cables for shipboard, high speed/light craft and off-shore cables.
Nuhas is the first and only cable producer in the Middle East to have been certified by DNV, Norway as capable of manufacturing power, control and instrumentation cables for shipboard, high speed/light craft and off-shore cables.
Our range of World-class HV, MV and LV Cables includes Single & Multi Core Armoured and Un-armoured
Cables, Specialty, Control, Instrumentation and also LSF, FRLS, LSOH & Custom Cables to meet the
requirements of a broad spectrum of applications
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...AKBAR TRADING
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
3.0 Project 2_ Developing My Brand Identity Kit.pptx
Rubber insulated cable
1. Flexible Welding Cable
70mm2 Super Flexible Welding Cable
Application:
Apply to the secondary side wiring and connecting welding clamp dedicated cables,the exchange does not
exceed the rated voltage 200 V DC and pulse of 400 V peak.Single core structure,a multi-unit complex
cutter made of soft wire.Conductive wire core heat-resistant polyester film used outside insulation wrap
packages,with the outermost layer of insulation made of rubber sheathing as a protective layer.
Flexible Welding Cable Service Condition
Welding Cables are suitable for the secondary side voltage exchange does not exceed 200 V and 400 V
peak pulsating DC welding machine with secondary side wiring and connecting welding clamp
purposes.Cable allows long-term temperature:≤+65
Flexible Welding Cable Model:
Model Name
H01N2-DWelder natural rubber sheathing cables
YHF Chloroprene or elastomer sheathe cable welder
Flexible Welding Cable Specificaions:
3. Power supply applications not
exceeding 600 Volts
Features:
Good flexibility
Abrasion resistant
Good color retention
RoHS Compliant
Application: Power supply applications not exceeding 600 Volt AC.
AWG/ No. of Cores
Normal Diameter of Strand
(AWG)
Normal Over Diameter
(mm)
AMPS
Oapprox. Net Weight
(kg/km)
6 AWG34 9.40 105 199
4 AWG34 10.54 140 284
2 AWG34 12.07 190 426
1 AWG34 13.46 220 521
1/0 AWG34 14.61 260 676
2/0 AWG34 16.00 300 789
3/0 AWG34 17.78 350 979
4/0 AWG34 20.32 405 1249
as a professional power cable manufacturer located in china,we produce many kinds rubber cable,such as
rubber flexible cables,Water Proof Power cable, rubber welding cable,mining cable,flux cored welding
wire,rubber insulated cables,pvc cables,xlpe insulated power cable,our power cable has been exported
many countries,and won the love of customers with high quality products, reasonable prices, we hope to
build long term business relation with different areas customers.
Previous Product: General Rubber Sheath Flexible Cable
Next Product: Flexible EPR Neoprene Rubber Cable
Flat Submersible Pump Cable
Meets the requirement of UL - 83 IEC 60245, DIN VDE 0282 PART 810, BS 6007 & BS 6899
600 volts, 90° C Dry & Wet
Designed for heavy duty use
Temperature range -40° to 90°
ROHS compliance (lead free)
4. Flat submersible 600 V pump cable suitable for use within deep well fresh or salt water submersible
pumps.
Contraction - Rubber AWG Pump Cables
Class C Flexible, bare copper
Insulation : PVC or Rubber
Sheath : PVC or Rubber
Colour Code : Black - Yellow - Red (Without Ground)
Black - Yellow - Red - Green (With Ground)
Specifications:
FLAT SUBMERSIBLE PUMP CABLE 2 & 3 CONDUCTOR W/ GROUND 600 VOLTS
Insulation:
POLYVINYL CHLORIDE & NYLON
Jacket:
POLYVINYL CHLORIDE
Sizes:
14 - 500 MCM, 90°C Dry, 75°C Wet
Applications:
Heavy duty (double jacketed), Flat Submersible pump cable suitable for use within well casings for
wiring deep well fresh or salt water submersible pumps.
Conductor:
Class C, soft drawn, bare copper per ASTM B3 and ASTM B8.
Insulation:
Heat and moisture resistant, polyvinyl chloride meeting the requirements of UL 83 for Type THHN and
THWN wires. The insulation is acceptable for use in locations at 90?C dry or 75?C wet. The insulation
thickness is in accordance with UL 83.
Conductor Jacket:
A nylon jacket is applied directly to the surface of the PVC insulation. Nylon shall meet the requirements
of UL 83. The thickness is in accordance with UL 83.
Ground Conductor:
Class C, soft drawn bare copper per per ASTM B3 and ASTM B8. The conductor is insulated with
PVC/Nylon and the nominal overall diameter shall equal the insulated circuit conductors
FLAT SUBMERSIBLE PUMP CABLE ADVANTAGES
5. Cut, tear and abrasion resistant
Exceptional long term performance
Excellent resistance to oils, acids, chemicals and ozone
Excellent impact and weather resistance
Excellent electrical propertise
FLAT SUBMERSIBLE PUMP CABLE
Flat Jacketed Submersible Pump Cables Without Ground
CONDUCTOR SIZE
(AWG)
NO OF
CONDUCTOR
NOS OF DIA.
OF WIRE
CORE DIA.
(MM)
NOMINAL SHEATH
THICKNESS (MM)
CABLE
DIA.
14 3 41 x 0.254 3.85 1.15
14.60 x
6.40
12 3 65 x 0.254 4.50 1.15
16.80 x
7.40
10 3 105 x 0.254 5.30 1.15
18.70 x
7.90
8 3 168 x 0.254 6.50 1.40
23.70 x
9.90
6 3 226 x 0.254 8.00 1.40
28.00
x11.40
4 3 420 x 0.254 10.10 2.00
35.50
x14.70
2 3 665 x 0.254 11.30 2.00
39.50
x16.20
1 3 817 x 0.254 13.60 2.20
45.50
x18.30
1/0 3 1045 x 0.254 13.60 2.20
45.50
x18.30
2/0 3 1330 x 0.254 16.60 2.20
51.00
x20.00
3/0 3 1672 x 0.254 18.00 2.40
60.00
x23.50
4/0 3 2116 x 0.254 19.80 2.65
65.00
x25.00
FLAT SUBMERSIBLE PUMP CABLE
Flat Jacketed Submersible Pump Cables WITH Ground
6. CONDUCTOR
SIZE (AWG)
NO OF
CONDUCTOR
Nos & Dia.
of Wire
Ground
Conductor Size
(AWG)
CORE
DIA.
(MM)
NOMINAL SHEATH
THICKNESS (MM)
CABLE
DIA. (MM)
14 3 41 X 0.25414 3.85 1.15 18.00 x6.50
12 3
65 X
0.254
12 4.50 1.15 21.00 x7.60
10 3
105 X
0.254
10 5.30 1.15 24.30 x7.90
8 3
168 X
0.254
10 6.50 1.40
29.70
x9.90
6 3
266 X
0.254
8 8.00 2.00
36.00
x11.80
4 3
420 X
0.254
8 10.10 2.00
45.10
x14.70
2 3
665 X
0.254
6 11.30 2.20
50.10
x16.20
1 3
817 X
0.254
6 13.60 2.20
58.10
x19.00
1/0 3
1045 X
0.254
6 15.60 2.20
58.10
x19.00
2/0 3
1330 X
0.254
6 18.00 2.20
66.50
x21.50
Note :
The number of wires is approximate and wire diameter is nominal; they shall be such as to satisfy the
requirements of conductor resistance as per Class 5 of IEC 60228 / DIN VDE 0295 / IS 8130 / BS 6360
In view of continuous improvements in our design and process, specifications given here in are subject
change without notice.
Previous Product: Submersible Oil Pump Cable
Rubber Welding Cable
rubber flexible cable,
rubber insulated cable,
10mm2 Welding Cable
16mm2 Welding Cable
25mm2 Welding Cable
35mm2 Welding Cable
50mm2 Welding Cable
7. 70mm2 Welding Cable
95mm2 Welding Cable
120mm2 Welding Cable
APPLICATIONS: Designed for connections from electrode holders and clamps to arc welders, bus welding
box or transformer.
INSTALLATION: Recommended for use in shipyards, mines and other areas where cable is subject to
extreme physical abuse.
FEATURES: Flame retardant, oil resistant, resilient, resists compression cuts and abrasion,durable
handling.
SPECIFICATIONS:
Condcutor: annealed rope stranded bare copper conductor
Insulation: Ethylene Propylene Rubber (EPR) type EP, Class 45, 105°C.
Seperation between conductor and jacket: Crepe Paper
Voltage: 600 Volts spark Tested
1. Best price in same quality.
2. Best quality in same price
3. Good after-sales service
Welding Cable
Applications
The cables are suitable for welding machine as secondary earth wire with secondary side to-ground vola
tage not more than 200V AC and impulse voltage peak 400V DC, or for connecting electrode holders.
Continuous operating temperature ≤60°C.
Manufacturing standards
8. ASTM ICEA BS DIN IEC GB AS/NZS etc.
Types, diagrams
Description International type Chinese type
Welding cable with
Rubber compound sheath
H01N2-D
( Common flexible)
H01N2-E
( Extra flexible)
60245 IEC 81 YH
Welding cable with
Polychloroprene compound (PCP)
or other equivalent synthetic elastomer sheath
60245 IEC 82 YHF
Main technical parameter
H01N2-D 60245 IEC 81 (YH) 60245 IEC 82(YHF)
Nom.
Area
2mm
Max. Dia.
of wire
mm
Nom. Cover
Thickness
mm
Average O.D. mm
Maximum DC
Resistance at 20°C
Ω/km
Min. Max. Tinned copper Untinned copper
10
0.21
2.0 7.7 9.7 1.95 1.91
16 2.0 8.8 11.0 1.24 1.21
25 2.0 10.1 12.7 0.795 0.780