In Bricketstown townland a number of agricultural features were exposed including a limekiln, land divisions, hearth and stakeholes, a platform with medieval waste and evidence of ridge and furrow cultivation. The main features of the sites included early land divisions (ditches), a work surface with residues from various industrial activities, a hearth surrounded by stakeholes/hearth furniture, later land divisions (ditches) that enclosed ridges and furrows and a kiln. The archaeological evidence from the site is generally indicative of activity associated with agriculture, incorporating a kiln, furrows, boundaries and drainage ditches.
The moated site comprised a rectangular moated area with an inside bank, a sub-rectangular building, and extensive evidence for activity outside the moat including numerous field boundaries, drains, furrows, working areas, a pottery kiln and a possible bisque firing kiln.
This document provides an architectural survey of nine sites along the proposed N7 Castletown to Nenagh road scheme in Ireland. It describes the methodology used, which included field inspections and historical research. Each site is then documented with descriptions, photographs, sketches, and historical map extracts. The sites include a former smithy, entrance gates and avenue, several vernacular farm complexes, the remains of a country house and associated buildings, sections of an old road and bridge, and a standing ruin. Recommendations are provided to mitigate impacts to cultural heritage.
The site consisted of a sub-circular enclosure with a diameter of approximately 36 m; it was initially identified as a crop mark on an aerial photograph, with no trace at ground level. Three sides of the enclosure were formed by two ditches (recorded as the ‘east ditch’ and the ‘west ditch’). The fourth side was characterised by large pits/postholes and slot trenches which probably continued the line of the enclosure, despite the absence of a ditch. The enclosure surrounded a Bronze Age settlement site, with a sub-circular post and stake-built structure excavated near the centre of the enclosed area and an ancillary structure to the west. This report details the results of excavation at the site and the descriptions are broken down into context complexes: the enclosure, the internal structure, the ancillary building, other internal features and external features.
The Harristown Little kiln appeared to be a typical key-hole shaped kiln. Two similar kilns were excavated as part of this project, both in Bricketstown townland (licence nos. 00E0476 and 00E0626). The radiocarbon date from this kiln (cal AD 1460-1660) was very close to the date of use at Bricketstown 00E0476 (cal AD 1450-1650). Channels were cut into the bases of both the Bricketstown kilns and these acted as wind tunnels which distributed air evenly through the kiln as it was burning but these were not present at Harristown Little.
This report comprises the Final Report of excavations undertaken by Eachtra Archaeological Projects along the line of the proposed Castledermot Sewerage Scheme in 2004. Kildare County Council proposed to upgrade the sewerage system in Castledermot village running from the Lerr River to the south along Abbey St. and Main St. to Skenagun to the north. The present town contains extensive archaeological remains, both upstanding and subsurface, of the earlier Medieval town (KD040-002). Therefore in 2002, an archaeological assessment of the proposed line of the sewerage trench was carried out (Byrne 2000). This was followed by a programme of test excavations (Lynch 2002). The results of this work led to a decision to archaeologically resolve the line of the proposed pipe trench in advance of commencement of construction works. Eachtra Archaeological Projects excavated the line of the proposed trench between June and December 2004 under excavation licence number 04E0750. While the excavated trench was narrow, it offered a lengthy cross-section of the Medieval and Post-Medieval town. The excavation revealed a number of facets of the town during these periods including the Medieval town walls and a cemetery. Following archaeological resolution of the trench, it was backfilled to be opened at a future date for the insertion of the sewerage pipes.
A group of over a hundred pits, postholes and stakeholes were located on the hilltop at Stagpark. The features dated from the Early Bronze Age to the Middle Iron Age which would suggest that the hilltop was occupied over a long period of time. Four pits containing burnt fills were recorded in Area A and Area C. The pits were similar in terms of morphology, size and date. The two sets of pits were located within 1m of each other and c. 40m apart. Almost identical Early Bronze Age dates were returned for two of the pits. The pits may have functioned as cremation pits, although minute traces of burnt bone was recorded in only one of the fills. They may also have been utilised for a domestic purpose. One of the two large pits (C.1001) in Area B was dated to the Early Bronze Age. It is difficult to interpret the function of these pits as they are exceptionally large. Stakeholes recorded on the upper sides of pit C.1001, these may have formed a frame or covering for the pit.
The recovery of two sherds of Late Bronze Age coarse ware from a pit, in the vicinity of the hearth-pit C.22, in the northwest section of Area A, would indicate that this area was utilised during the Late Bronze Age. A cluster of three pits and eight stakeholes were located to the southeast of the hearth.
Four of the stakeholes in particular could have formed a shelter around the hearth open to the west.
Although no dating evidence was obtained from the features in the vicinity of the large pits C.66 and C.90 it is possible that they are associated with the Late Bronze Age activity surrounding the hearth C.22.
A Middle Iron Age date was returned from the later re-cut of the large pit C.110. An L-shaped alignment, consisting of three pits, 13 stakeholes and three postholes, extended to the north and east of the pit. The alignment measured c. 6m north-south by 13m east-west. It could be associated with the Middle Iron Age pit C.110, the Early Bronze Age cremation pits or the Late Bronze Age features.
A number of fulachta fiadh were recorded downslope to the north and south of the site. Three burnt mounds were recorded (CO019-019, -020 and -021) within 500m of the site, while four other burnt mounds were excavated as part of this road project; Stagpark 1 (04E1119) was 600m to the south, Stagpark 2 (04E1121) was 200m away to the north and Mitchelstown 2 (04E1071) was 1.5km to the north. The fulachta fiadh are located on heavier clay subsoil. Radiocarbon dates obtained from some of the burnt mounds would suggest that these sites were utilized during the Early Bronze Age.
The site, possibly located on the margins of prehistoric settlement, forms an interesting contrast to a Middle Bronze Age settlement site excavated at Mitchelstown 1 (04E1072). The remains of at least three circular houses were excavated at Mitchelstown 1. The site was located on a limestone ridge on the northern bank of the Gradoge River. The opposing site on the southern bank of the Gradoge River was subsequently occupied by the Anglo Normans in the thirteenth century. The material evidence recorded on site was scant. No associated pits and stakeholes were associated with the structures. It is possible that these features were located outside the route corridor.
Two distinct features were recorded on the western and eastern side of the route of the N8 during topsoil striping prior to the construction of the temporary realignment of the R614. Site A a Bronze Age / Iron Age ring ditch was located to the west of the N8 and Site B an Early Bronze Age enclosure was located to the east in Ballybrowney Lower.
Site A has been identified as a ring-ditch with an internal diameter of 4.25m. Cremated human bone was recorded in the fills of the ring ditch. It is likely to be associated with the large Bronze Age/Iron Age site on the route of the N8 to the north-east which was excavated by E. Cotter in 2003. The site included four enclosures, three circular houses and a medieval corn-drying kiln. The site was truncated by several levelled field boundaries, probably 18th in origin (Cotter 2004, 38).
Site B was a continuation of an Early Bronze Age enclosure partially excavated by E.Cotter in 2003. As it was not going to be disturbed it was not excavated but recorded, planned and covered.
Three phases of archaeological activity were recorded on the site. The earliest phase is a Neolithic house and associated features within Area ІІ. An Early Bronze Age pit was located in Area І some 70m south of the house site. The final phase of activity related to Post-Medieval agricultural practices and included a back-filled ditch within Area ІІ.
The moated site comprised a rectangular moated area with an inside bank, a sub-rectangular building, and extensive evidence for activity outside the moat including numerous field boundaries, drains, furrows, working areas, a pottery kiln and a possible bisque firing kiln.
This document provides an architectural survey of nine sites along the proposed N7 Castletown to Nenagh road scheme in Ireland. It describes the methodology used, which included field inspections and historical research. Each site is then documented with descriptions, photographs, sketches, and historical map extracts. The sites include a former smithy, entrance gates and avenue, several vernacular farm complexes, the remains of a country house and associated buildings, sections of an old road and bridge, and a standing ruin. Recommendations are provided to mitigate impacts to cultural heritage.
The site consisted of a sub-circular enclosure with a diameter of approximately 36 m; it was initially identified as a crop mark on an aerial photograph, with no trace at ground level. Three sides of the enclosure were formed by two ditches (recorded as the ‘east ditch’ and the ‘west ditch’). The fourth side was characterised by large pits/postholes and slot trenches which probably continued the line of the enclosure, despite the absence of a ditch. The enclosure surrounded a Bronze Age settlement site, with a sub-circular post and stake-built structure excavated near the centre of the enclosed area and an ancillary structure to the west. This report details the results of excavation at the site and the descriptions are broken down into context complexes: the enclosure, the internal structure, the ancillary building, other internal features and external features.
The Harristown Little kiln appeared to be a typical key-hole shaped kiln. Two similar kilns were excavated as part of this project, both in Bricketstown townland (licence nos. 00E0476 and 00E0626). The radiocarbon date from this kiln (cal AD 1460-1660) was very close to the date of use at Bricketstown 00E0476 (cal AD 1450-1650). Channels were cut into the bases of both the Bricketstown kilns and these acted as wind tunnels which distributed air evenly through the kiln as it was burning but these were not present at Harristown Little.
This report comprises the Final Report of excavations undertaken by Eachtra Archaeological Projects along the line of the proposed Castledermot Sewerage Scheme in 2004. Kildare County Council proposed to upgrade the sewerage system in Castledermot village running from the Lerr River to the south along Abbey St. and Main St. to Skenagun to the north. The present town contains extensive archaeological remains, both upstanding and subsurface, of the earlier Medieval town (KD040-002). Therefore in 2002, an archaeological assessment of the proposed line of the sewerage trench was carried out (Byrne 2000). This was followed by a programme of test excavations (Lynch 2002). The results of this work led to a decision to archaeologically resolve the line of the proposed pipe trench in advance of commencement of construction works. Eachtra Archaeological Projects excavated the line of the proposed trench between June and December 2004 under excavation licence number 04E0750. While the excavated trench was narrow, it offered a lengthy cross-section of the Medieval and Post-Medieval town. The excavation revealed a number of facets of the town during these periods including the Medieval town walls and a cemetery. Following archaeological resolution of the trench, it was backfilled to be opened at a future date for the insertion of the sewerage pipes.
A group of over a hundred pits, postholes and stakeholes were located on the hilltop at Stagpark. The features dated from the Early Bronze Age to the Middle Iron Age which would suggest that the hilltop was occupied over a long period of time. Four pits containing burnt fills were recorded in Area A and Area C. The pits were similar in terms of morphology, size and date. The two sets of pits were located within 1m of each other and c. 40m apart. Almost identical Early Bronze Age dates were returned for two of the pits. The pits may have functioned as cremation pits, although minute traces of burnt bone was recorded in only one of the fills. They may also have been utilised for a domestic purpose. One of the two large pits (C.1001) in Area B was dated to the Early Bronze Age. It is difficult to interpret the function of these pits as they are exceptionally large. Stakeholes recorded on the upper sides of pit C.1001, these may have formed a frame or covering for the pit.
The recovery of two sherds of Late Bronze Age coarse ware from a pit, in the vicinity of the hearth-pit C.22, in the northwest section of Area A, would indicate that this area was utilised during the Late Bronze Age. A cluster of three pits and eight stakeholes were located to the southeast of the hearth.
Four of the stakeholes in particular could have formed a shelter around the hearth open to the west.
Although no dating evidence was obtained from the features in the vicinity of the large pits C.66 and C.90 it is possible that they are associated with the Late Bronze Age activity surrounding the hearth C.22.
A Middle Iron Age date was returned from the later re-cut of the large pit C.110. An L-shaped alignment, consisting of three pits, 13 stakeholes and three postholes, extended to the north and east of the pit. The alignment measured c. 6m north-south by 13m east-west. It could be associated with the Middle Iron Age pit C.110, the Early Bronze Age cremation pits or the Late Bronze Age features.
A number of fulachta fiadh were recorded downslope to the north and south of the site. Three burnt mounds were recorded (CO019-019, -020 and -021) within 500m of the site, while four other burnt mounds were excavated as part of this road project; Stagpark 1 (04E1119) was 600m to the south, Stagpark 2 (04E1121) was 200m away to the north and Mitchelstown 2 (04E1071) was 1.5km to the north. The fulachta fiadh are located on heavier clay subsoil. Radiocarbon dates obtained from some of the burnt mounds would suggest that these sites were utilized during the Early Bronze Age.
The site, possibly located on the margins of prehistoric settlement, forms an interesting contrast to a Middle Bronze Age settlement site excavated at Mitchelstown 1 (04E1072). The remains of at least three circular houses were excavated at Mitchelstown 1. The site was located on a limestone ridge on the northern bank of the Gradoge River. The opposing site on the southern bank of the Gradoge River was subsequently occupied by the Anglo Normans in the thirteenth century. The material evidence recorded on site was scant. No associated pits and stakeholes were associated with the structures. It is possible that these features were located outside the route corridor.
Two distinct features were recorded on the western and eastern side of the route of the N8 during topsoil striping prior to the construction of the temporary realignment of the R614. Site A a Bronze Age / Iron Age ring ditch was located to the west of the N8 and Site B an Early Bronze Age enclosure was located to the east in Ballybrowney Lower.
Site A has been identified as a ring-ditch with an internal diameter of 4.25m. Cremated human bone was recorded in the fills of the ring ditch. It is likely to be associated with the large Bronze Age/Iron Age site on the route of the N8 to the north-east which was excavated by E. Cotter in 2003. The site included four enclosures, three circular houses and a medieval corn-drying kiln. The site was truncated by several levelled field boundaries, probably 18th in origin (Cotter 2004, 38).
Site B was a continuation of an Early Bronze Age enclosure partially excavated by E.Cotter in 2003. As it was not going to be disturbed it was not excavated but recorded, planned and covered.
Three phases of archaeological activity were recorded on the site. The earliest phase is a Neolithic house and associated features within Area ІІ. An Early Bronze Age pit was located in Area І some 70m south of the house site. The final phase of activity related to Post-Medieval agricultural practices and included a back-filled ditch within Area ІІ.
Most of the archaeological features recorded during this excavation were pits, 26 in total, two walls and a well were also excavated.
Most of the contexts were dated according to the artefacts retrieved from their fills. Therefore, pits with exclusively or almost exclusively medieval pottery were classified as medieval, whereas pits with medieval and post-medieval finds were classified as post-medieval. However, as most of the excavated features were backfilled, it is possible that some of the cut features that contained deposits, with inclusions of post-medieval artefacts, were actually open and in use in the medieval period.
The remains uncovered can be divided into medieval, post-medieval and modern. The pits were in general sub-circular and oval in plan, and, with the exception of pit C.98, were on average 2.06 m in length by 1.36 m in width by 0.61 m in depth. The fills of the pits were a mix of dark grey brown silty clay with occasional inclusions of animal bone and pottery. A total of 26 pits, two walls and a well were recorded.
The site occurs within an area where a cluster of Bronze Age fulachta fiadh sites have been identified.
Three burnt mounds were recorded (CO019-019, -020 and -021) within 500m of the site, while two other burnt mounds were excavated as part of this road project; Stagpark 2 (04E1121) was 800m away to the north and Mitchelstown 2 (04E1071) was 2km to the north. The intense use of this small area for the purposes of heating stones and water has produced a date range that suggests occupation on a long-term, if perhaps intermittent basis from at least the Early Bronze Age. The lower heavier wetter ground in the area was used for sites such as these. With the exception of the burnt mound at Mitchelstown 2, which was located on the northern bank of the Gradoge River, the remaining burnt mounds are not located adjacent to any known or contemporary water sources. The underlying subsoil is however a heavy clay which holds water very effectively being almost impermeable. The archaeological evidence indicates that contemporary Early Bronze Age occupation occurred on the higher drier ground, at Stagpark 1 (04E1120) 600m to the north. An extensive occupation site, dating to the Middle Bronze Age, was located on a limestone ridge on the northern bank of the Gradoge River at Mitchelstown 1 (04E1072) 2.8km to the north.
A small group of two pits dating to the Middle Neolithic and a burnt mound where hot stone technology was used was identified at Fermoy. This burnt mound technology could have been utilised in a variety of processes from cooking and bathing to fulling, felting, boat building and many other industrial processes. The challenge of these sites is to determine which activity took place on each or indeed whether they were multifunctional. It can be suggested that the site was used for the manufacture of cloth by the processes of fulling or dying.
The site at Mitchelstown 1 was discovered during archaeological investigations along the route of the Mitchelstown Relief Road. The site comprised three houses constructed in at least two phases, one of the houses having been cut by the other two. The houses were approximately 10m in diameter and were roughly D-shaped in plan, with entrances centrally located on the straight side, facing east. One of the houses showed clear evidence of having had an internal division in the form of a slot trench running between two structural postholes. The slot trench could have held a wattle wall separating the entrance area (approximately one-third of the floor area) from the remainder of the house.
Little evidence was found of the material culture or economy of the inhabitants of the Mitchelstown houses. No pottery was recovered from the site and the few lithics were undiagnostic.
The number of cereal grains recovered from the soil samples was too small to allow any interpretation of the economy or diet of the population. A striking aspect of the environmental material however was the large number of seeds of the Dock family. These are usually considered to be weed seeds brought into houses inadvertently along with cereals. However, that is unlikely here, given the paucity of cereal grains on the site, and it may be that Dock seeds were deliberately gathered as a food source. Parallels for this have been found in Britain and Denmark where Dock seeds have been found in the gut contents of bog bodies.
The Mitchelstown houses have numerous parallels among the growing numbers of Middle Bronze Age houses now being discovered in recent Irish excavations and add to the expanding settlement pattern of the period.
Tom Berkley completed a work experience placement from May 6th to June 13th at Darrian Cars. Over the four week period, he assisted with various tasks related to building and repairing racing vehicles. Some of the key activities included applying fiberglass to chassis molds, preparing and painting suspension components, assembling gearboxes, installing piping and wiring, and fabricating roll cages and other metal structures. By gaining hands-on experience with multiple aspects of motorsports engineering, Tom was able to enhance his skills and knowledge of the vehicle manufacturing process.
This document provides information about the USB2817 integrated circuit, including its pin descriptions and functions. It describes the purpose of pins such as AD, DA, DI, DO, and CNT for analog to digital conversion and digital to analog functions. It also explains the chip's ID register for identification purposes and provides programming information for configuration registers to control aspects like conversion timing and power management.
1. This document discusses the environmental management system at Kaiyodai University from 2005 to 2006. It describes the implementation of the EMS according to international standards.
2. Key metrics and results are presented such as reductions in CO2 emissions, water usage, and waste. The EMS led to improved monitoring and management of environmental impacts.
3. The EMS underwent continual improvements and expansion over the two year period. More areas and facilities were incorporated into the system. Staff training and awareness activities helped strengthen the environmental program.
This document appears to be a slide presentation covering various topics related to international business. It discusses the merger between Zealand and Ghent Sea Port and the advantages of this for the cross-border region. It also covers international sales practices using the example of chocolate sales. Additional topics discussed include diversity and defining a unique selling proposition, blending technology and tradition when doing business in India, and managing political risk in international operations. The document provides an overview of these topics and excerpts from various speakers and case studies.
This document is a technical memorandum regarding the structural design of Modules A and C of the El Vigia Medical Surgical Hospital. It includes calculations for the beams and slabs of Modules A and C according to Panamanian design standards. The calculations were completed by Dr. Tania Croston for the owner, Caja del Seguro Social, and contractor, Constructora Nova. Diagrams and details of the reinforcing steel are provided for the beams and slabs.
This technical report summarizes the structural design of the foundations, columns, and shear walls for Modules A, B, and C of the Hospital Médico Quirúrgico - El Vigía. The design considers the load requirements specified in the Panamanian structural design code [REP_04]. Finite element models were created for each module using ETABS v9.0.7. Foundations were designed based on soil resistance determined by a geotechnical report. The structural system utilizes concrete columns, deep beams, and shear walls with post-tensioned slabs, except for level 300 of Module B which will have a two-way reinforced slab. Lateral forces will be resisted by the shear walls and bracing
Zimbrick GMC West, a Wisconsin GMC dealership Madison has turned to for their automotive needs since 1965, is proud to provide fleet and light duty upfitting services for the 2011 GMC Sierra 1500. Please call (608) 271-1601 for more information.
This document provides an overview of the main workflow features in Vegas Pro software. It introduces the main window components like the timeline, track list, transport controls. It describes how to create projects, import and work with media files, capture video, use the device explorer, work with events and tracks. It also covers nesting projects and playing back/previewing projects.
This document is a social clubs activity report for the 1st semester of the 2005/2006 academic year from a guidance counselor. It summarizes the activities held each month from September to January, including the dates and descriptions of activities. It also provides the outcomes and conclusions of the semester's work. The report is presented to school administration and staff to inform them of the social club's accomplishments in the first half of the year.
This document is an English-Vietnamese dictionary of shipbuilding and register technical terms. It contains over 70 pages with definitions and illustrations of various ship types, components, and equipment. The document is divided into three sections: 1) Types of Ships, 2) Details of Ship Structures, and 3) Ship Equipment. Section 1 defines different categories of cargo ships, tankers, passenger vessels, and other vessel types. Section 2 describes structural elements such as the hull, deck, superstructure, and other integral parts. Section 3 covers equipment found on ships such as those used on the bridge and engine room.
Zimbrick GMC West, a GMC dealership Wisconsin has turned to for their automotive needs since 1965, is proud to provide fleet and upfitting services for the 2011 GMC Canyon. Please call (608) 271-1601 for more information.
Eachtra Archaeological Projects were engaged to monitor works within previously untested or unresolved locations along the route of the new N8 Rathcormac/Fermoy Bypass, between June 2004 and February 2005. Three previously unknown archaeological sites were discovered in the course of monitoring internal works. One such site was at Ballyoran Bog, where remains of Giant Irish Deer and a possible brushwood trackway were excavated. The skeletal remains of the Giant Irish Deer are a rare occurrence on archaeological sites, but one of the most interesting aspects of the excavation was the discovery that later inhabitants of the area were aware that deer remains were present in the bog, as tool marks on antler fragments demonstrate. Excavation and post-excavation analysis of the brushwood platform/trackway has revealed that the occupiers of this site exploited the immediate environs of the bog for construction materials. The discovery of the possible trackway is significant, given that the majority of those sites recorded in Ireland are located in the Midlands. In conclusion, the site at Ballyoran bog is important on a provincial, as well as a national scale.
National Human Rights Institutions In The EUThomas Müller
This report examines national human rights institutions (NHRIs) in EU member states. It discusses how NHRIs play an important role in protecting fundamental rights at the domestic level. The report also explores how NHRIs can strengthen the overall human rights architecture in Europe by cooperating more and ensuring coherent structures and mandates at the national level. The key opinions expressed are that NHRIs should go beyond minimum Paris Principles standards, have strong visibility while maintaining transparency, increase European cooperation, and establish coherent national-level architectures.
Archaeological Report - IDA Arklow Business & Technology Park, Ballynattin, C...John Tierney
The site was excavated under licence no. 04E0712. It was divided into ten areas of excavation: Areas 1-6, Area 6W, Area 7, Area 10 and Area 12.The earliest evidence for human activity was an Early Neolithic radiocarbon date obtained from the fill of a ditch in Area 6. However, there is no evidence for associated Early Neolithic activity. Most of the archaeological features excavated at Ballynattin were Bronze Age. Bronze Age pits were found in Area 6W, there was a spread of Bronze Age material in Area 3 and three partial Bronze Age structures were found in Areas 6 and 7. These were truncated and approximately only one third of each structure survived for excavation. A furnace excavated in Area 2 may also be Bronze Age in date; it has no associated radiocarbon dates but a saddle quern and flints were found within the furnace fill. The remaining features excavated at the site were primarily post-medieval, including a hearth excavated in Area 4, drains and ditches (Areas 1, 4 and 5) and a 19th century cobbled surface (Area 5).
This document provides instructions for installing osCommerce 2.2 Milestone 2, including uploading files, creating a database, running the installation wizard, and basic post-installation steps. It also outlines the administration interface and provides guidance on configuring store settings, catalog management, modules, and other administrative functions. Common errors are addressed along with tips and solutions.
2014-2018 Paint Creek Trail Recreation Master PlanKristen Myers
The Paint Creek Trailways Commission adopted its 2014-2018 Recreation Master Plan on January 21, 2014. The plan was sent to the five Trail communities (Rochester, Rochester Hills, Oakland Township, Orion Township, and Lake Orion), as well as regional planning agencies for approval. The plan will guide the development and management of the Paint Creek Trail over the next five years.
This report details the results of an archaeological excavation carried out at Kiltotan Collinstown 14, Co. Westmeath. The excavation uncovered two parallel post-medieval ditches and two burnt pits that were possibly medieval iron smelting furnaces. Analysis of artefacts, ecofacts and radiocarbon dating provided insights into the medieval and post-medieval activity on the site. The excavated features at this site are similar to others in the surrounding area and add to the understanding of settlement patterns in this rich archaeological landscape over multiple periods.
This report details an archaeological excavation of an isolated hearth feature located in Bricketstown, Co. Wexford during construction of the N25 road. The hearth consisted of a charcoal-rich spread overlying three deposits within an irregular oval cut that had been heavily truncated by previous groundworks. Radiocarbon dating placed the hearth in the Iron Age period between 500 BC-500 AD. It was one of few Iron Age sites identified in County Wexford to date.
Most of the archaeological features recorded during this excavation were pits, 26 in total, two walls and a well were also excavated.
Most of the contexts were dated according to the artefacts retrieved from their fills. Therefore, pits with exclusively or almost exclusively medieval pottery were classified as medieval, whereas pits with medieval and post-medieval finds were classified as post-medieval. However, as most of the excavated features were backfilled, it is possible that some of the cut features that contained deposits, with inclusions of post-medieval artefacts, were actually open and in use in the medieval period.
The remains uncovered can be divided into medieval, post-medieval and modern. The pits were in general sub-circular and oval in plan, and, with the exception of pit C.98, were on average 2.06 m in length by 1.36 m in width by 0.61 m in depth. The fills of the pits were a mix of dark grey brown silty clay with occasional inclusions of animal bone and pottery. A total of 26 pits, two walls and a well were recorded.
The site occurs within an area where a cluster of Bronze Age fulachta fiadh sites have been identified.
Three burnt mounds were recorded (CO019-019, -020 and -021) within 500m of the site, while two other burnt mounds were excavated as part of this road project; Stagpark 2 (04E1121) was 800m away to the north and Mitchelstown 2 (04E1071) was 2km to the north. The intense use of this small area for the purposes of heating stones and water has produced a date range that suggests occupation on a long-term, if perhaps intermittent basis from at least the Early Bronze Age. The lower heavier wetter ground in the area was used for sites such as these. With the exception of the burnt mound at Mitchelstown 2, which was located on the northern bank of the Gradoge River, the remaining burnt mounds are not located adjacent to any known or contemporary water sources. The underlying subsoil is however a heavy clay which holds water very effectively being almost impermeable. The archaeological evidence indicates that contemporary Early Bronze Age occupation occurred on the higher drier ground, at Stagpark 1 (04E1120) 600m to the north. An extensive occupation site, dating to the Middle Bronze Age, was located on a limestone ridge on the northern bank of the Gradoge River at Mitchelstown 1 (04E1072) 2.8km to the north.
A small group of two pits dating to the Middle Neolithic and a burnt mound where hot stone technology was used was identified at Fermoy. This burnt mound technology could have been utilised in a variety of processes from cooking and bathing to fulling, felting, boat building and many other industrial processes. The challenge of these sites is to determine which activity took place on each or indeed whether they were multifunctional. It can be suggested that the site was used for the manufacture of cloth by the processes of fulling or dying.
The site at Mitchelstown 1 was discovered during archaeological investigations along the route of the Mitchelstown Relief Road. The site comprised three houses constructed in at least two phases, one of the houses having been cut by the other two. The houses were approximately 10m in diameter and were roughly D-shaped in plan, with entrances centrally located on the straight side, facing east. One of the houses showed clear evidence of having had an internal division in the form of a slot trench running between two structural postholes. The slot trench could have held a wattle wall separating the entrance area (approximately one-third of the floor area) from the remainder of the house.
Little evidence was found of the material culture or economy of the inhabitants of the Mitchelstown houses. No pottery was recovered from the site and the few lithics were undiagnostic.
The number of cereal grains recovered from the soil samples was too small to allow any interpretation of the economy or diet of the population. A striking aspect of the environmental material however was the large number of seeds of the Dock family. These are usually considered to be weed seeds brought into houses inadvertently along with cereals. However, that is unlikely here, given the paucity of cereal grains on the site, and it may be that Dock seeds were deliberately gathered as a food source. Parallels for this have been found in Britain and Denmark where Dock seeds have been found in the gut contents of bog bodies.
The Mitchelstown houses have numerous parallels among the growing numbers of Middle Bronze Age houses now being discovered in recent Irish excavations and add to the expanding settlement pattern of the period.
Tom Berkley completed a work experience placement from May 6th to June 13th at Darrian Cars. Over the four week period, he assisted with various tasks related to building and repairing racing vehicles. Some of the key activities included applying fiberglass to chassis molds, preparing and painting suspension components, assembling gearboxes, installing piping and wiring, and fabricating roll cages and other metal structures. By gaining hands-on experience with multiple aspects of motorsports engineering, Tom was able to enhance his skills and knowledge of the vehicle manufacturing process.
This document provides information about the USB2817 integrated circuit, including its pin descriptions and functions. It describes the purpose of pins such as AD, DA, DI, DO, and CNT for analog to digital conversion and digital to analog functions. It also explains the chip's ID register for identification purposes and provides programming information for configuration registers to control aspects like conversion timing and power management.
1. This document discusses the environmental management system at Kaiyodai University from 2005 to 2006. It describes the implementation of the EMS according to international standards.
2. Key metrics and results are presented such as reductions in CO2 emissions, water usage, and waste. The EMS led to improved monitoring and management of environmental impacts.
3. The EMS underwent continual improvements and expansion over the two year period. More areas and facilities were incorporated into the system. Staff training and awareness activities helped strengthen the environmental program.
This document appears to be a slide presentation covering various topics related to international business. It discusses the merger between Zealand and Ghent Sea Port and the advantages of this for the cross-border region. It also covers international sales practices using the example of chocolate sales. Additional topics discussed include diversity and defining a unique selling proposition, blending technology and tradition when doing business in India, and managing political risk in international operations. The document provides an overview of these topics and excerpts from various speakers and case studies.
This document is a technical memorandum regarding the structural design of Modules A and C of the El Vigia Medical Surgical Hospital. It includes calculations for the beams and slabs of Modules A and C according to Panamanian design standards. The calculations were completed by Dr. Tania Croston for the owner, Caja del Seguro Social, and contractor, Constructora Nova. Diagrams and details of the reinforcing steel are provided for the beams and slabs.
This technical report summarizes the structural design of the foundations, columns, and shear walls for Modules A, B, and C of the Hospital Médico Quirúrgico - El Vigía. The design considers the load requirements specified in the Panamanian structural design code [REP_04]. Finite element models were created for each module using ETABS v9.0.7. Foundations were designed based on soil resistance determined by a geotechnical report. The structural system utilizes concrete columns, deep beams, and shear walls with post-tensioned slabs, except for level 300 of Module B which will have a two-way reinforced slab. Lateral forces will be resisted by the shear walls and bracing
Zimbrick GMC West, a Wisconsin GMC dealership Madison has turned to for their automotive needs since 1965, is proud to provide fleet and light duty upfitting services for the 2011 GMC Sierra 1500. Please call (608) 271-1601 for more information.
This document provides an overview of the main workflow features in Vegas Pro software. It introduces the main window components like the timeline, track list, transport controls. It describes how to create projects, import and work with media files, capture video, use the device explorer, work with events and tracks. It also covers nesting projects and playing back/previewing projects.
This document is a social clubs activity report for the 1st semester of the 2005/2006 academic year from a guidance counselor. It summarizes the activities held each month from September to January, including the dates and descriptions of activities. It also provides the outcomes and conclusions of the semester's work. The report is presented to school administration and staff to inform them of the social club's accomplishments in the first half of the year.
This document is an English-Vietnamese dictionary of shipbuilding and register technical terms. It contains over 70 pages with definitions and illustrations of various ship types, components, and equipment. The document is divided into three sections: 1) Types of Ships, 2) Details of Ship Structures, and 3) Ship Equipment. Section 1 defines different categories of cargo ships, tankers, passenger vessels, and other vessel types. Section 2 describes structural elements such as the hull, deck, superstructure, and other integral parts. Section 3 covers equipment found on ships such as those used on the bridge and engine room.
Zimbrick GMC West, a GMC dealership Wisconsin has turned to for their automotive needs since 1965, is proud to provide fleet and upfitting services for the 2011 GMC Canyon. Please call (608) 271-1601 for more information.
Eachtra Archaeological Projects were engaged to monitor works within previously untested or unresolved locations along the route of the new N8 Rathcormac/Fermoy Bypass, between June 2004 and February 2005. Three previously unknown archaeological sites were discovered in the course of monitoring internal works. One such site was at Ballyoran Bog, where remains of Giant Irish Deer and a possible brushwood trackway were excavated. The skeletal remains of the Giant Irish Deer are a rare occurrence on archaeological sites, but one of the most interesting aspects of the excavation was the discovery that later inhabitants of the area were aware that deer remains were present in the bog, as tool marks on antler fragments demonstrate. Excavation and post-excavation analysis of the brushwood platform/trackway has revealed that the occupiers of this site exploited the immediate environs of the bog for construction materials. The discovery of the possible trackway is significant, given that the majority of those sites recorded in Ireland are located in the Midlands. In conclusion, the site at Ballyoran bog is important on a provincial, as well as a national scale.
National Human Rights Institutions In The EUThomas Müller
This report examines national human rights institutions (NHRIs) in EU member states. It discusses how NHRIs play an important role in protecting fundamental rights at the domestic level. The report also explores how NHRIs can strengthen the overall human rights architecture in Europe by cooperating more and ensuring coherent structures and mandates at the national level. The key opinions expressed are that NHRIs should go beyond minimum Paris Principles standards, have strong visibility while maintaining transparency, increase European cooperation, and establish coherent national-level architectures.
Archaeological Report - IDA Arklow Business & Technology Park, Ballynattin, C...John Tierney
The site was excavated under licence no. 04E0712. It was divided into ten areas of excavation: Areas 1-6, Area 6W, Area 7, Area 10 and Area 12.The earliest evidence for human activity was an Early Neolithic radiocarbon date obtained from the fill of a ditch in Area 6. However, there is no evidence for associated Early Neolithic activity. Most of the archaeological features excavated at Ballynattin were Bronze Age. Bronze Age pits were found in Area 6W, there was a spread of Bronze Age material in Area 3 and three partial Bronze Age structures were found in Areas 6 and 7. These were truncated and approximately only one third of each structure survived for excavation. A furnace excavated in Area 2 may also be Bronze Age in date; it has no associated radiocarbon dates but a saddle quern and flints were found within the furnace fill. The remaining features excavated at the site were primarily post-medieval, including a hearth excavated in Area 4, drains and ditches (Areas 1, 4 and 5) and a 19th century cobbled surface (Area 5).
This document provides instructions for installing osCommerce 2.2 Milestone 2, including uploading files, creating a database, running the installation wizard, and basic post-installation steps. It also outlines the administration interface and provides guidance on configuring store settings, catalog management, modules, and other administrative functions. Common errors are addressed along with tips and solutions.
2014-2018 Paint Creek Trail Recreation Master PlanKristen Myers
The Paint Creek Trailways Commission adopted its 2014-2018 Recreation Master Plan on January 21, 2014. The plan was sent to the five Trail communities (Rochester, Rochester Hills, Oakland Township, Orion Township, and Lake Orion), as well as regional planning agencies for approval. The plan will guide the development and management of the Paint Creek Trail over the next five years.
This report details the results of an archaeological excavation carried out at Kiltotan Collinstown 14, Co. Westmeath. The excavation uncovered two parallel post-medieval ditches and two burnt pits that were possibly medieval iron smelting furnaces. Analysis of artefacts, ecofacts and radiocarbon dating provided insights into the medieval and post-medieval activity on the site. The excavated features at this site are similar to others in the surrounding area and add to the understanding of settlement patterns in this rich archaeological landscape over multiple periods.
This report details an archaeological excavation of an isolated hearth feature located in Bricketstown, Co. Wexford during construction of the N25 road. The hearth consisted of a charcoal-rich spread overlying three deposits within an irregular oval cut that had been heavily truncated by previous groundworks. Radiocarbon dating placed the hearth in the Iron Age period between 500 BC-500 AD. It was one of few Iron Age sites identified in County Wexford to date.
The recording of three Early Bronze Age pots within a small pit is a very significant find. There are no parallels for the two small pots, one of which was decorated to represent a human face or body. The pit containing the pottery was located on the northern bank of the Gradoge River on the western fringe of the road corridor, it is possible that further archaeological features are located to the west. The pit maybe associated with the burnt mound. The radiocarbon date returned for the pottery would overlap with Early Bronze Age dates returned for Fulachta Fiadh in Stagpark 3 (04E1119), located 2200m to the south, and are almost identical to dates returned for Early Bronze Age activity in Stagpark 1 (04E1120), located 1400m to the south.
There are 16 Bronze Age burials, comprising cist burials, Food Vessel burials, Urn burials and pit burials, recorded within a 13 km radius of the site. The burials are generally located on low-lying ground between 60 m and 100 m OD. Some are located within 500 m of the Funshion River and its tributaries, the Sheep River, the Tooraleagan River and the Gradoge River. Generally, Early Bronze Age burials tend to be concentrated in low-lying areas such as valley floors, while the associated settlement sites are probably located on higher ground along the valleys (Cooney & Grogan 1999, 103). While the majority of graves contain the remains of one individual, multiple burials, either collective or successive, also occurred. The majority of the Cordoned Urns are associated with burials and the simple pit grave is the commonest type (Waddell 2000, 149).
The Mitchelstown pit and pottery group shares some characteristics of Early Bronze Age burial practices in terms of the low-lying location in the river valley, the simple form of the pit itself, and the deposition of the Cordoned Urn. However, many aspects are very different. The creation of a face and human features on Vessels 2 and 3, the positioning of the ears, anatomically incorrect, on both vessels and the inclusion of a spoon are all unusual. In addition, despite the inclusion of a Cordoned Urn - usually a funerary vessel, there was no evidence of burial recorded at the site. The deposition therefore points away from burial and towards other ritual, for instance libation to a deity. It is also possible that this pit does not exist in isolation and other archaeological features, including burials, may be located in the area to the west, beyond the edge of the road corridor.
The site comprised a kiln, a small pit, and a field system, evidenced by three ditches. This is one of three kilns discovered during the road development scheme. It was medieval/post-medieval in date and consisted
of a circular main chamber with the flue projecting to the south-southwest. It was probably a limekiln and there was evidence for several periods of use.
The site situated at Harristown Big consisted of five fire pits, one heat affected area, nine pits, three stakeholes and three areas where archaeological material accumulated in natural hollows. There was a proliferation of burnt waste and evidence for burning in situ. Two of the pits and a stakehole produced fragments of pottery identified crucibles and a small bowl or stand. Radiocarbon dating indicated that activity at the site was Middle or Late Bronze Age. Specialist analysis of the ceramics has facilitated the interpretation of the site as an area where metalworking was carried out.
The site occurs within an area where a cluster of Bronze Age fulachta fiadh sites have been identified.
Three burnt mounds were recorded (CO019-019, -020 and -021) within 500m of the site, while two other burnt mounds were excavated as part of this road project; Stagpark 2 (04E1121) was 800m away to the north and Mitchelstown 2 (04E1071) was 2km to the north. The intense use of this small area for the purposes of heating stones and water has produced a date range that suggests occupation on a long-term, if perhaps intermittent basis from at least the Early Bronze Age. The lower heavier wetter ground in the area was used for sites such as these. With the exception of the burnt mound at Mitchelstown 2, which was located on the northern bank of the Gradoge River, the remaining burnt mounds are not located adjacent to any known or contemporary water sources. The underlying subsoil is however a heavy clay which holds water very effectively being almost impermeable. The archaeological evidence indicates that contemporary Early Bronze Age occupation occurred on the higher drier ground, at Stagpark 1 (04E1120) 600m to the north. An extensive occupation site, dating to the Middle Bronze Age, was located on a limestone ridge on the northern bank of the Gradoge River at Mitchelstown 1 (04E1072) 2.8km to the north.
This report details the results of an archaeological excavation of a disturbed ringfort (GA087-177) in Loughbown, County Galway. The excavation revealed evidence of Iron Age activity pre-dating the construction of the enclosure. Features excavated included a sub-circular structure, a causeway, entrance, internal bank, and a V-shaped external ditch enclosing the site. Radiocarbon dates from charcoal samples spanned the 4th century BC to the 17th century AD. Few artefacts were recovered, including a bracelet, quernstone, and knife blade. The excavation helped further the understanding of the construction and occupation of the site from the Iron Age period through the medieval period.
Archaeological Test Excavation Report E2003 Ballybrowney, N8 RFJohn Tierney
Two main areas of high archaeological significance were identified during the testing of the proposed route option A. These were a sub rectangular enclosure and the upstanding enclosure elements of the ringfort.
The outer bank and ditch of the ringfort are still intact to a large degree and are visible on the surface within the CPO line. The area is heavily overgrown with mature and semi-mature trees and a dense understorey of secondary growth. Despite this, and despite having been truncated by the insertion of a trackway cutting through the outer bank and the construction of a stone revetment and drain on its southern side, the outer enclosing elements of the ringfort are to a large degree extant.
The insertion of a modern trackway in this location would have a severe negative impact on the northern enclosing elements of the ringfort.
Until monitoring of top-soil stripping commenced in 2003 only one archaeological monument was recorded on the site of the current development, Enclosure LI005:037. Following monitoring and subsequent excavation this area now includes records of at least three Late Bronze Age unenclosed flat cremation cemeteries, a ring-ditch in close proximity to one of the smaller cemeteries and the remains of four Fulachta Fiadh.
Eachtra archaeological projects undertook excavation of Stratham’s garage in January and February of 2005 under licence 99E0757, an extension to a pre-existing licence. In total some eighty pits were excavated with a small number of linear features and post-medieval wall foundations, drains and a cobbled surface also present. There was no evidence for a medieval structure in this area of the site and many of the pits were filled with refuse. The excavated area was interpreted as the partial remains of four medieval burgage plots. Recent excavations of the area immediately north and adjacent to this site will hopefully provide material comparable to the results from the Stratham’s Garage site.
This site probably represents evidence of domestic occupation. Based on comparative evidence and the absence of any artefacts it has been assigned a prehistoric date. It may form either a corner from a fence line or may form part of a more complex structure such as a dwelling house. Rectangular houses are
known from the Neolithic through to the Bronze Age, and from the early historic period onwards.
This report details the results of an archaeological excavation at a burnt mound site located at Urraghry townland in County Galway. The excavation uncovered a burnt mound, trough, stake-holes, gully, and paleochannel. Radiocarbon dating of charcoal samples indicated Early Bronze Age activity on the site. Mesolithic stone tools were also found, suggesting earlier occupation. The site contributes to understanding prehistoric settlement patterns in the area, with five Bronze Age sites excavated along this portion of a new road development.
The site consisted of two concentrations of burnt mound material spread over an area of 20 m2 and an off-centre trough that was possibly originally plank-lined.
The document reports on an archaeological excavation at Ballydowny in Killarney, County Kerry. Five cooking pits (fulachta fiadh), a ring ditch containing a cremation burial, two medieval iron working areas, and a prehistoric site with evidence of copper working were uncovered. Radiocarbon dating indicates occupation from the Neolithic period through the Bronze Age, Iron Age, and into the early medieval period. The excavation revealed remnants of iron smelting and smithing, as well as five cooking pits that were likely used for boiling or steaming food. A ring ditch and associated cremation burial were also found, dating to the Bronze Age.
This document provides a geological report on the Mount Bisson rare-earth element claim group in north-central British Columbia. The report describes the property location, regional geology, lithologies present on the property, known mineral occurrences including the Ursa, Laura and Pegmatite 541 rare-earth showings, and exploration work conducted including geophysical surveys, soil and rock sampling. Rare-earth mineralization is hosted in granitic pegmatites and associated skarn zones and occurs as allanite, titanite and other rare-earth minerals. The report concludes that further exploration is warranted to evaluate the potential for economic rare-earth mineralization on the property.
In May 2005, Eachtra Archaeological Projects excavated a fulacht fiadh and an isolated pit in Skehacreggaun td., Mungret. The fulacht fiadh dates to the Middle Bronze Age, within the usual date range for these monument types. The isolated pit is likely to date to the Bronze Age and it contained the only artefact recovered through these archaeological works. The scraper suggests craft and subsistence since prehistoric times.
The site at Fermoy Wood has been identified as a early Iron Age burnt mound where hot stone technology was used but there is no definite evidence from this site to indicate the specific purpose of heating stones and water in the area; the technology could have been utilised in a variety of processes from cooking and bathing to fulling, felting, boat building and many other industrial processes. The site is just one of many similar monuments that have been discovered in the general area in recent years and it contributes to the widespread evidence for use of hot stones and water in the area in prehistory. The nearest excavated site to the Fermoy Wood fulacht fiadh was the brushwood platform and trackway and nearby discovery of Giant Irish Deer in Ballyoran Bog (04E1014 extension).
The site at Scartbarry has been identified as a Late Bronze Age burnt mound where hot stone technology was used but there is no definite evidence from this site to indicate the specific purpose of heating stones and water in the area; the technology could have been utilised in a variety of processes from cooking and bathing to fulling, felting, boat building and many other industrial processes. The site is just one of many similar monuments that have been discovered in the general area in recent years and it contributes to the widespread evidence for use of hot stones and water in the area in prehistory.
This document is a research report on underground box structure construction. It discusses challenges like groundwater levels and surrounding structures. It provides examples of retaining walls like diaphragm walls used for underground construction. The report details a site visit to Bond Street station and methods like bottom-up and top-down construction. It then proposes constructing a basement box structure at a specific London property, analyzing the geology, design, construction method, and structural integrity through calculations and drawings.
The Historic Graves Project involves community volunteers conducting archaeological surveys of historic graveyards. Volunteers use GPS cameras and audio recorders to photograph, document, and map over 1,200 headstones across 11 graveyards over two years. For each graveyard, the project creates a folder with a register of graves, a sketch map, contact sheets of photographs, and record sheets. The goal is to explore, protect, and promote awareness of Ireland's historic graveyards.
Public talk by John Tierney on recent work on the O'Daly Bardic School, Dromnea, Sheepshead, Cork and outlining a strategy for community-led heritage projects.
An Introduction to the Ballyhoura Peter Robinson Assisted Emigration ProjectJohn Tierney
This document provides an overview of a genealogical tourism project led by Dr. Paul MacCotter and John Tierney to document the history of families that took part in the Peter Robinson Assisted Emigration from Ireland to Canada in the 1820s-1830s. The project involves surveying graveyards and mapping homestead locations to build an online geolocated database of records. The goal is to help descendants research their ancestry and trace the places their families lived before emigrating. Methods for collecting, organizing, and publishing the historical data online are discussed.
Mendicity Institute Transmission book June-August 1882John Tierney
The document discusses the benefits of meditation for reducing stress and anxiety. Regular meditation practice can help calm the mind and body by lowering heart rate and blood pressure. Studies have shown that meditating for just 10-20 minutes per day can have significant positive impacts on both mental and physical health over time.
From headstone to homestead - crowdsourcing & heritage in IrelandJohn Tierney
This document outlines John Tierney's work with Eachtra Archaeological Projects surveying historic graves and homesteads in Ireland. It provides guidance on conducting graveyard surveys through sketch plans, geotagged photos, and record sheets. It also describes a process for identifying historic homesteads through reconnaissance, geotagged photographs, and publishing findings online and in a shared spreadsheet. The goal is to link Irish emigrant communities both within Ireland through shared heritage sites and records, and with communities abroad where emigrants settled.
Human remains of 48 individuals were discovered and excavated during works associated with the Tuam Town Water Supply Scheme in Toberjarlath townland on the eastern edges of Tuam, County Galway. The burials were located within the bounds of the former Tuam Union Workhouse, which opened in 1846. Eighteen grave pits containing between two and four burials each were uncovered. Analysis showed the individuals were paupers buried in the former workhouse grounds in the 19th century. A section of the workhouse boundary wall and internal ditch were also excavated.
Slides from John Tierney's talk on exploring the heritage of Ardmore in the era of digital research and publication. This talk is part of the www.reyndr.com project being developed by Eachtra in association with a number of community groups.
Community Genealogy in Ireland - Historic GravesJohn Tierney
Community engagement in historic graveyard surveys has a multiplier effect. What started as an archaeological survey of headstones has become community genealogy and local history. This talk was presented to the Irish Genealogical Research Society AGM in May 2013.
The Historic Graves Project is a community collaboration that aims to promote genealogical tourism by pinpointing family names and histories across centuries in graveyards in southeast Cork, Ireland. Volunteers record information from historic graveyards to share online and create puzzles and stories to engage people in learning about the people and families represented in each place through time.
Following the discovery of human remains during archaeological monitoring of engineering trial pits in Sawpit Lane a 1 m wide trench was excavated along Sawpit Lane, Church Lane and The Mall in advance of pipelaying associated with the Tuam Town Water Supply in July 2010. The remains of 15 individuals were recorded and excavated along with a series of ditches and pits. A stone culvert and the remains of a boundary wall were also identified. Two of the skeletons and a bone fragment from the base of one of the ditches returned calibrated radiocarbon dates centring on the seventh century. In addition a smithing hearth cake typical of early iron smithing was recovered from the upper fill of the ditch along with a bone trial motif piece which has sixth/seventh century parallels. The other pits and ditches had fills containing relatively mixed finds and animal bone fragments. The excavated features are located outside the present Temple Jarlath enclosure in the middle of Tuam and close to the site of the early medieval market area and the site of the post-medieval shambles. The pits may have acted as refuse pits for waste and the ditches may have demarcated areas or being used as open drains. The early burial evidence and the early possible enclosing ditch coupled with reports of an early unclassified cross slab suggest that the graveyard and enclosure at Temple Jarlath may be associated with St Jarlath’s original early Christian foundation.
This document provides an archaeological excavation report for Adare Castle in County Limerick, Ireland. It includes:
- A history of Adare Castle from its origins in the medieval period through different periods of occupation.
- A description and maps showing the location of the castle and areas excavated between 2001-2006, including the drawbridge, moat, kitchen, great hall, and two domestic areas.
- Results of the excavations including structures like walls, drains, and pits uncovered, along with artifacts found consisting of pottery, wood, bone, stone, metal, glass and leather objects.
- Environmental evidence from animal bones, plant remains, and shells analyzed to understand life at
Archaeological Report - 50-60 South Main Street, Wexford, Co. WexfordJohn Tierney
Occupation evidence dating to the 13th century and later post medieval activity, in the form of a well and boundary wall, associated with the demolished buildings on Peter Street was excavated. The medieval activity was recorded at the central southern part of the site. The area of excavation measured 11.5m north-south by 12m east-west.
All the pits in the excavation trench were medieval in date and are likely to have served as rubbish dumps. The artefactual material and the faunal remains recovered from the various fills would support this hypothesis. There was no evidence that they were used for industrial practises, though waste material from industrial activity was mixed with domestic refuse. They were located in the area of the medieval house burgage plots. No evidence of medieval structures was recorded. It is likely to exist under the foundations of the existing upstanding structures on South Main Street.
The pottery assemblage from the site was examined by the ceramic specialist Clare McCutcheon. The majority of the pottery consisted of local and Irish wares, comprising of Lenister Cooking ware, Wexford-type coarse ware, ware, fine ware and cooking ware. The English wares consisted of Minety-type, Ham Green and Redcliffe wares. The Wexford-type wares indicate local pottery production, although no medieval pottery kilns have as yet been located in Wexford. The French wares particularly the Saintonge ware, from the southwest of France, jugs, represented the wealthier tastes.
The greatest proportion of archaeological features encountered at Shandon relate to Medieval activity. While nothing dateable was recovered from the sub-rectangular enclosure ditch itself, the discovery of 12th/13th century pottery from features inside and immediately outside the enclosure provides a strong case that the ditch is contemporaneous.
It must be considered a possibility that the enclosure at Shandon is a Medieval moated site. The latter have been defined as “all rectangular enclosures bounded by banks and moats of Medieval date, whether they enclosed a major house or simply a garden or cattle pen” (Barry 1987, 84). While there was no definite evidence of a bank at Shandon, there is a suggestion that one may have existed. Moated sites date to the 13th and 14th century (ibid., 85) and the local pottery found at Shandon overlaps with this date range.
It must also be considered that the Shandon enclosure relates to Hiberno-Norse activity. Prior to the present work, the motif piece was the sole indicator of such activity. However, this find is now further substantiated by the discovery of an 11th century Hiberno-Norse coin (Plate 12). Because of preservation by redesign and avoidance, a large proportion of archaeological features at Shandon were not excavated and consequently it is quite possible that further diagnostic Hiberno-Norse material survives on the site. However, one coin and a trial piece do not a Hiberno-Norse settlement make and it is plausible that the coin was deposited in Anglo-Norman times long after its original period of manufacture and use.
The buildings to the rear of 26 Patrick St. were demolished. The area of the extension to the rear to the hotel measured 20m by 13m. The area of excavation was bounded by a stone wall to the south, by a building site to the north and west and by the Georgian building, 26 Patrick St., due for refurbishment to the east.
Occupation evidence dating to the 13th century and later post medieval activity associated with the demolished extension to 26 Patrick St. was excavated. The medieval activity was recorded at the western side of the site. Post-medieval construction, associated with the red brick foundations of the extension to the rear of the Georgian building which fronts onto Patrick St., had truncated medieval activity at the eastern end. The destroyed earlier medieval activity is evidenced by the occurrence of both medieval and post-medieval pottery in the same strata.
Archaeological excavation of the site at Busherstown revealed a complex multi-period site with six phases of activity. In broad outline they confirmed the use of the area from the Early Neolithic period to the present time. The first period of activity was prehistoric in date and comprised a small assemblage of lithics and a circular structure (Structure A) dated on typological grounds to the Bronze Age. The second phase was dated to the early medieval period, when the area was used for cereal processing, as evidenced by the discovery of at least 17 cereal-drying kilns and a further seven possible kilns. The majority of the kilns were located in a line that extended for a distance of 80 m in a NW-SE direction. The firing chambers of the kiln were for the most part located at the NE. A small number of the kilns were partially enclosed (Structures D and E). The third phase of activity was defined by an enclosure (ditches C.68 and 447) which was probably contemporary with the cereal processing. The continuous use of the area of the enclosure in the medieval period was confirmed when certain areas of the site were enclosed through the construction of deep, wide ditches (ditches C.54 and C.63). The ditches (ditches C.227 and C.78) were re-cut in the later medieval period to function as an annexe to a moated site. A substantial ditch, 5.5 m wide by 1.7 m deep, defined the moated site. Only the southern corner of the moated site was located within the road corridor. However, the entire outline can be clearly seen in aerial photographs of the adjoining field to the north-east. Two structures (C and D) were contemporary with the moated site. The post-medieval period was represented by a large number of furrows crossing the site and material which had been dumped into the top fills of the ditches. The site was levelled in the recent past.
Authors: Ewelina Chrobak, Jacinta Kiely and Tori McMorran
The excavations at Kilsheelan, Co. Tipperary uncovered three areas of pits. The pits in two areas (Areas 2 and 3) were isolated and did not contain notable artefacts or environmental evidence. However, at Area 1 there were several pit clusters and artefacts and radiocarbon dates indicated occupation (probably intermittent rather than permanent) during the Early Neolithic.
Geophysical Survey: Land Adjacent to Archaeological Sites - County Offaly & C...John Tierney
This document provides details of archaeological geophysical surveys conducted at 5 sites - Busherstown 1, Drumbaun 2, Drumroe 1, Killeisk 1, and Park 1 - located along the route of a new road scheme in Counties Offaly and Tipperary, Ireland. Magnetic gradiometer and susceptibility surveys were used to investigate the archaeological remains found during previous excavations. The surveys identified potential archaeological features extending beyond the excavation areas, including ditches, enclosures, and field boundaries, adding to the understanding of activity at these sites. The results provide valuable information to planners but require verification through archaeological excavation.
The excavation of the site at Moneygall 2 comprised a single pit of unknown date. The site is located in Moneygall townland, Cullenwaine parish, Offaly county. Jacinta Kiely directed the excavation and authored the excavation report. The pit was excavated and no datable artifacts or features were uncovered, so the date of the feature remains unknown.
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UPRAHUL
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
2. Archaeological Excavation Report,
N25 Rathsillagh to Harristown Realignment
Bricketstown
Co. Wexford
Kiln, field systems, hearth, work surface
December 2009
Client: Wexford County Council,
c/o Tramore House Road Design Office,
Tramore,
Co. Wexford
Licence No.: 00E0476
Licensee: Daniel Noonan
Contact details:
The Forge,
Innishannon, Co. Cork.
Written by: Daniel Noonan and Penny Johnston Tel.: 021 470 16 16
Fax: 021 470 16 28
E-mail: info@eachtra.ie
Web Site: www.eachtra.ie
3. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Table of Contents
1 Summary ............................................................................................................1
2 Introduction .......................................................................................................1
3 Description of Development ...............................................................................1
4 Background to the excavation area......................................................................1
5 Archaeological & Historical Background............................................................2
5.1 Mesolithic 7000-4000 BC............................................................................2
5.2 Neolithic 4000-2500 BC ..............................................................................2
5.3 Bronze Age 2500-500 BC.............................................................................3
5.4 Iron Age 500 BC-500 AD ............................................................................3
5.5 Early Medieval 500 AD-1169 AD ................................................................4
5.6 Later Medieval 1169 AD-1600 AD...............................................................4
5.7 Post-Medieval (after 1600 AD) .....................................................................5
6 Results of Archaeological Excavation .................................................................6
6.1 Early Land Division - Ditches ......................................................................6
6.2 The Kiln .......................................................................................................7
6.3 Industrial Area - Work Surface ....................................................................11
6.4 Hearth and Stakeholes ................................................................................12
6.5 Later Land Division - Ditches ....................................................................13
6.6 Furrows .......................................................................................................14
7 Artefacts and Industrial Waste........................................................................... 15
8 Environmental Remains .................................................................................... 15
9 Discussion ......................................................................................................... 15
10 Summary ........................................................................................................... 19
11 References ..........................................................................................................20
11.1 Websites ......................................................................................................22
12 Figures ............................................................................................................... 23
13 Plates ................................................................................................................. 36
14 Appendices ........................................................................................................41
14.1 Appendix 1: Context Register ......................................................................41
14.2 Appendix 2: Stratigraphic Matrix ...............................................................48
14.3 Appendix 3: Finds register ...........................................................................49
14.4 Appendix 4: The medieval pottery from Bricketstown, Taghmon ................54
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ iii
4. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Table of contents cont.
14.5 Appendix 5: Radiocarbon dates ...................................................................56
14.6 Appendix 6: Archaeobotanical Assessment Report on the Charred Plant remains from
Bricketstown .............................................................................................................57
14.7 Appendix 7: Geological Identification of Stone Artefacts from Bricketstown63
14.8 Appendix 8: Industrial residues ...................................................................66
14.9 Appendix 9: Charcoal assessment Bricketstown, Co. Wexford (00E0476) ...75
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ iv
5. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
List of Figures
Figure 1: Discovery map showing the route of the N25 Rathsillagh-Harristown road ..........................23
Figure 2: Ordnance Survey 1st edition showing the route of the N25 Rathsillagh-Harristown road ... 24
Figure 3: RMP sheet showing the route of the N25 Rathsillagh-Harristown road ...............................25
Figure 4: Route of new road with all excavated sites displayed .............................................................26
Figure 5: Plan of excavated area within the context of modern field and road boundaries ....................27
Figure 6: Plan of the excavated area showing the three main areas of archaeological activity (kiln, hearth
and stakeholes, the working surface) and ditches .................................................................................28
Figure 7: Sections through early land division ditches (C.5 and C.8) ...................................................29
Figure 8: Post-excavation plan of the kiln bowl and flue (C.54 and C.19) ............................................30
Figure 9: Mid-excavation plan of the kiln bowl and flue (C.54 and C.19) ...........................................31
Figure 10: Earliest activity at the medieval work surface (C.154 and C.141).........................................32
Figure 11: Work surface truncated by furrows (C.80 and C.81) ..........................................................33
Figure 12: Area with hearth (C.97) and stakeholes ............................................................................34
Figure 13: Section through later land division ditch (C.15) .................................................................35
List of Plates
Plate 1: Pre-excavation of kiln and ditches showing the kiln flue cutting the early ditch .......................36
Plate 2: Stone-lined flue at the base of the kiln bowl .............................................................................36
Plate 3: Lime residues at the base of the kiln bowl.................................................................................37
Plate 4: Layers of burnt clay and charcoal within the kiln flue ..............................................................37
Plate 5: Rake-out banked onto the southeast side of the flue .................................................................38
Plate 6: Re-cut of the kiln bowl.............................................................................................................38
Plate 7: Pre-excavation shot of parallel furrows traversing the site..........................................................39
Plate 8: Millstone fragments recovered during topsoil removal ..............................................................39
Plate 9: Mid excavation of kiln showing splayed flue ............................................................................ 40
Plate 10: Post-excavation of kiln bowl showing baked substratum in kiln ............................................ 40
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ v
6. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
1 Summary
County Wexford
Townland Bricketstown
Parish Kilgarvan
Civil Parish Whitechurchglynn
Barony Bantry
National Grid Co-ordinates 29177 12290
(219800 122947)
Chainage 7010 East-West
400-1200 North-South (Adamstown to Taghmon Road)
Site Type Kiln, ditches, furrows, hearth, stake-holes and a working surface
Excavation Licence Number 00E0476
2 Introduction
Archaeological testing was conducted by Eachtra Archaeological Projects along the proposed route
of the N25 realignment from Rathsillagh to Harristown, Co. Wexford. The proposed routeway was
stripped by machine (under licence 00E0379) and in Bricketstown townland a number of agricultural
features were exposed including a limekiln, land divisions, hearth and stakeholes, a platform with me-
dieval waste and evidence of ridge and furrow cultivation. The site was close to the intersection of the
Adamstown to Taghmon road and the main route, at chainage 7020. Following consultation with the
DoEHLG (then Dúchas) and Wexford County Council a strategy of total excavation under licence
00E0476 was decided upon. The site represented a segment of the proposed road intake and was 180
m long and a maximum of 21 m wide.
3 Description of Development
The N25 is the main southern east to west route, traversing the counties of Cork, Waterford, Kilkenny
and Wexford. It links the port of Rosslare Harbour with Cork City, via New Ross, Waterford City,
Dungarvan and Youghal. A section of the N25 route between the townlands of Rathsillagh and Har-
ristown Little was selected for upgrading, as the old road comprised a single carriageway in either
direction, with several ‘blind’ junctions, and in many cases only a hedge separating farmland from
the road. The new route sought to straighten and level out the N25 and to provide a wider single car-
riageway with hard shoulder in either direction, in keeping with the Barntown scheme completed in
1998 (Fig.1).
4 Background to the excavation area
The 8.5 km route of the new road crosses a series of low, undulating hills, to the south of the old N25
route, and is situated at a height of between 45 m and 80 m above sea level. The landscape here is
characterised by small hills interspersed with many small streams; these eventually flow into the River
Corock to the southwest, into the Slaney to the northwest, as well as feeding into Ballyteige Bay to
the south. From its western beginning in Rathsillagh townland the routeway climbs gently, running
parallel and to the south of the old N25. It then continues through Assagart, Ballyvergin, Shanowle,
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 1
7. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Camaross, Carrowreagh, Dungeer, Bricketstown and through into Harristown Little, eventually exit-
ing in Harristown Big townland and tying into the Barntown improvement which opened in 1998
(Figs. 1-3).
The higher ground was lush pasture, well drained, and gave spectacular views all around. Sites on this
part of the route included prehistoric settlement activity and a series of limekilns. Conversely, the lower
ground in Camaross, Carrowreagh and Dungeer was quite marshy and prone to growth of gorse. Sites
traditionally associated with low-lying ground were found in these townlands, for example a burnt
mound at Dungeer and a moated site at Carrowreagh (Fig. 4).
5 Archaeological & Historical Background
There are thirteen recorded archaeological monument sites within 1 km either side of the development;
one is a church and graveyard site, nine are listed as enclosure sites of between 30 m and 60 m in di-
ameter and three are moated sites (two of which are destroyed). The ecclesiastical site apparently dates
to the medieval period as there is a fragment of a medieval grave cover in the graveyard and the site
was originally surrounded by a circular bank (Moore 1996, 129). The enclosures most likely represent
the raths and ringforts of the early medieval period (Moore 1996, 28). Prior to these excavations, the
known archaeological remains in the locality were all medieval and post-medieval but several prehis-
toric sites were identified during the course of this programme of excavation along the N25 route-way,
including Neolithic material at Harristown Big, Bronze Age sites at Dungeer, Ballyvergin and Har-
ristown Big and Iron Age activity at two sites in Bricketstown.
5.1 Mesolithic 7000-4000 BC
The earliest known human occupation of Ireland dates to the Mesolithic period (c. 7000-4000 BC).
Lithic scatters from the period have been found along the banks of the Barrow river in counties Wex-
ford and Waterford (Green and Zvelebil 1990). Some diagnostic Mesolithic stone artefacts were also
found in Camolin, in north Wexford, and along the eastern coastline between Carnsore and Kilm-
ichael point (Stout 1987, 3). However, most activity is identified in resource-rich locations by riversides
and coastlines and there is no known evidence for Mesolithic activity within the area affected by the
roadtake.
5.2 Neolithic 4000-2500 BC
There is piecemeal evidence for Neolithic occupation in County Wexford. Stout’s (1987) distribution
map of Neolithic remains includes evidence for one single burial site, fifteen find spots for flint and
stone atefacts, two portal tombs and seven other possible megalithic tombs. Work on the Archaeologi-
cal Survey of Ireland reduced the number of other possible megaliths from seven to five (Moore 1996).
Subsequent excavation work has increased the extent of knowledge concerning Neolithic settlement in
the county. Early Neolithic pottery was found by McLoughlin (2004) at Kerlogue (02E0606) and at a
pit and a hearth excavated under licence 00E0630 at Courtlands East (Purcell 2002). Later Neolithic
activity in the county is indicated by Sandhills ware, discovered during an excavation (02E0434) in a
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 2
8. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
pit at St. Vogues (Purcell 2004). An undated excavation at MacMurroughs (1985:59) also uncovered a
number of flints and a ground stone axe, associated with a hearth and pit may also be Neolithic in date
(Cotter 1986). Some evidence for Neolithic activity was found as part of this project at Harristown
Big (00E0424) where Neolithic pottery was discovered at a site where various pits and stakeholes were
excavated. Early Neolithic and possible Middle Neolithic wares were found.
5.3 Bronze Age 2500-500 BC
Some of the earliest Bronze Age finds from Co. Wexford are three chance finds of Beaker gold discs
(only one with a provenance). Other Bronze Age metal finds from the county includes hoards of both
Early and Late Bronze Age artefacts, e.g. at Cahore Point, a cave at Nash, Ballyvadden, Enniscorthy,
Forth Commons and New Ross (Stout 1987, 9-10, 22). At Ballyvadden the Late Bronze Age metal ob-
jects were found within a ceramic container, a unique feature in Irish hoards, but apparently common
on the continent during the period (Stout 1987, 22).
Burnt mounds are the most common Bronze Age site-types found in Ireland and sixty-three such sites
were identified in the Archaeological Inventory for the county (Moore 1996) and since the survey work
several have been excavated in the county; examples were found at Strandfield (McCarthy 2004) and
along the routes of the N30 (Enniscorthy to Clonroche) and the N11 (Arklow to Gorey) roads (www.
nra.ie). Only one burnt mound was excavated during works on the Rathsillagh-Harristown realign-
ment of the N25; this was found at Dungeer 00E0474.
Much of our evidence for Bronze Age activity in Wexford to date has come from burials. There is a
recognised concentration of cist-type burials in Co. Wexford; these are commonly thought to date to
the Early Bronze Age. Stout (1987) identified more than thirty-seven identified but many were not
well documented and Moore (1996) could only pinpoint the locations of only twenty-five cist and
pit burials in total. Several other burials with diagnostic Bronze Age pottery have since been found
during excavation: there was a cordoned urn burial at Ballintubbrid, vase urn burials at Coolnaboy,
Gorey Corporation Lands and Kilmurry, a cist with a tripartite bowl at Knockbrack and a ring ditch
with cremation burials at Ferns Lower (Bennett 2004-5). Another ring-ditch was found at Kerlogue
Sites 4 and 5 and a large round house excavated at Kerlogue Site 2 was probably also of Bronze Age
date (McLoughlin 2004). The excavations from the Rathsillagh-Harristown road scheme included one
Early-Middle Bronze Age site at Ballyvergin where hot-stone technology was used in association with
metalworking. Another metalworking site was found at Harristown Big (00E0425) where a series of
Late Bronze Age metalworking pits and crucibles were found and the Late Bronze Age burnt mound
site at Dungeer (00E0474).
5.4 Iron Age 500 BC-500 AD
In common with much of Ireland there is very little evidence for Iron Age activity in Co. Wexford.
Hillforts and promontory forts have possible construction dates in the Late Bronze Age or Early Iron
Age and there are two hillforts and five promontory forts in the county (Moore 1996). The artefactual
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 3
9. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
evidence for this period in Wexford includes two pins that are of probable Iron Age date and two pos-
sible Iron Age stone heads recovered from Duncormick (Stout 1987, 29-30). Two of the sites excavated
along the route of the Rathsillagh-Harristown road produced Iron Age radiocarbon dates, both were
from Bricketstown and one was a small cremation cemetery (00E0623), the second was a small hearth
(00E0624).
5.5 Early Medieval 500 AD-1169 AD
The beginnings of Christianity are evident in the remains of seventeen early ecclesiastical sites in Co.
Wexford (Moore 1996). One of the earliest excavated examples from Co. Wexford was at St. Vogues,
at Carnsore, where a wooden church preceded a stone building (O’Kelly 1975). One of the closest
known early church sites to the roadtake is located approximately 3 km to the south at the church of
Poulmarl/Taghmon, the monastery founded by St. Munna in the seventh century. The list of abbots
from this site continues to the end of the tenth century and there is a record of a Viking raid in 917 AD
(Moore 1996, 160). By this time the Norse town of Weisford, later to become Wexford, was already
established, having been established by the end of the ninth century (Colfer 1990-1991).
Evidence for settlement in the county during the early medieval period comes from ringforts, typical
monuments of the period. These were circular or subcircular enclosures made from earthen banks that
surrounded areas roughly between 25 and 40 metres in diameter. Excavated examples have demon-
strated that they generally surrounded single farmstead-type settlement sites. One hundred and fifty-
three examples are known from the county (Moore 1996). Of these only two were located within close
proximity to the area of the new Rathsillagh-Harristown road (at Haystown, c. 3 km to the north of
the new road and at Cullenstown c. 2 km to the south). There are also numerous circular enclosure sites
that probably represent ringforts; thirteen of them appear on the RMP Sheet 36 (covering the area of
the new road-take) for Co. Wexford.
5.6 Later Medieval 1169 AD-1600 AD
The Anglo-Normans first landed in Ireland in Co. Wexford in 1169. The county was within their initial
land-grab zone between AD 1169 and AD 1190 (Mitchell & Ryan 1997, 305) and was sub-infeudated
in the early stages of Anglo-Norman activity in Ireland (Colfer 1987). Wexford county was one of the
first twelve counties created by the English Kings in the 12th to 13th centuries, from the original Prov-
inces and lesser Territories of the Irish Tuatha (Howarth 1911, 161). By the thirteenth century much of
the area covered by the Rathsillagh-Harristown road-take was a frontier zone and the archaeological
landscape of these areas is characterised by moated sites: there are ten known sites on RMP Sheet 36
for Co. Wexford, the area covered by the new road, and one moated site at Carrowreagh was found
along the line of the new road. Moated sites were distributed at the peripheries of the colonial organi-
sation centres and probably represent an attempt at secondary colonisation (O’Keeffe 2000, 73-75).
There are almost 130 moated sites known in County Wexford (Moore 1996, 95). However, by the end
of the fourteenth century, much of the Anglo-Norman settlement in Co. Wexford had retreated to a
southeastern stronghold in the baronies of Forth and Bargy, a pattern that Colfer (1987) suggests was
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 4
10. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
reminiscent of the “Pale of county Wexford”. Excavations of medieval sites in the county include the
remains of a medieval house were excavated at Ballyanne (Moran 2000), with pottery indicative of oc-
cupation in the 12th to 14th centuries, and excavations at Ferns, Hook Head, Newtown, Tintern, Tagh-
mon, New Ross and Wexford town all produced medieval archaeological remains (Bennett 2004-5).
Along the route of the Rathsillagh-Harristown road the moated site at Carrowreagh (excavated under
licence no. 00E0476) was the largest medieval site excavated. A spread of medieval occupation material
was also excavated at Bricketwtown (00E0476) and this was rich in the remains of medieval pottery.
It is also possible that the limekilns at Bricketstown (00E0476) and Harristown Little (00E0417) were
in use at the very end of the medieval period.
5.7 Post-Medieval (after 1600 AD)
A few excavations of post-medieval archaeological sites have been carried out in Wexford county, in-
cluding Brideswell Big, Duncannon Fort, and excavations in Wexford and Ennisorthy town (Bennett
2004-5). Some of the excavations from the Rathsillagh to Harristown road scheme were probably used
during this time, in particular the limekilns at Bricketstown (00E0476, 00E0626) and Harristown
Little (00E0417) were probably in use at this period. There is Jacobean house site in Dungeer, one of
the townlands affected by the roadtake. References to the house/castle date to the early seventeenth
century (Moore 1996).
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 5
11. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
6 Results of Archaeological Excavation
The site comprised six archaeological parts; early land divisions (ditches), a kiln, a working surface, a
hearth with stakeholes, later land divisions (ditches) and furrows (Fig. 5 and 6). The latest features were
furrows, bound by ditches which acted as field divisions and/or drains. Underlying the furrows two
separate areas of activity were encountered. The first of these consisted of a number of stakeholes and
a hearth, while the second was a working surface. The kiln, which post-dated one of the field bounda-
ries, was also excavated. The context register, with full contextual details, is found in Appendix 1, the
stratigrpahic matrix is in Appendix 2 and the finds register is in Appendix 3.
6.1 Early Land Division - Ditches
Two parallel ditches (C.5 and C.8), orientated roughly northeast-southwest, ran across the northern
end of the site (Fig. 6). The northeastern of the two (C.5) was also the longest, with 56.5 m of the ditch
exposed. It was 1 m wide with a maximum remaining depth of 0.14 m. The northwestern edge of the
ditch sloped gradually to an irregular, but flattish base. The opposite side was almost vertical. This
ditch was filled by two deposits (C.3 and C.10), both were probably a product of natural processes and
their ‘tip lines’ seemed to indicate this infill occurred from the southeastern side (Fig. 7). The basal fill
(C.10) was a redeposited natural while the upper fill (C.3) was darker with more characteristics of a
surface soil. The redeposited natural in C.10 may have slumped from a bank located to the southeast.
At an average distance of 1.5 m to the southeast was the parallel ditch (C.8) which was exposed over
a length of 37 m. This ditch was 1.2 m wide and 0.32 m deep. The ditch cut had moderately sloping
sides, convex on the northwest and concave on the southeast, with a flat base (Fig. 7). Three fills (C.2,
C.6 and C.7) had been deposited in the cut (C.8). The basal fill (C.7) was the thickest of these and
was overlain by redeposited subsoil (C.6) which was similar to the basal fill (C.10) of the other ditch
(C.5). These were redeposited natural sediments and may have been slump from a bank of redeposited
natural that filled the area between the two ditches. The tip lines in both sections (Fig. 7) also suggest
that infilling occurred from the area between the two ditches, again suggesting a bank.
The upper fill of ditch C.8 was C.2, a fill almost identical to C.7, the basal fill. A fragment of pottery
was recovered from C.2 (Find 00E0476:2:1). This was identified as medieval Leinster Cooking Ware
(Appendix 4), which is the same type as the pottery recovered from the work surface situated c. 30
m to the southwest and its deposition here may indicate that the activity at both areas of the site were
more or less contemporaneous. However, this could also indicate material from a medieval context
that was disturbed and redeposited in the ditch fill at a much later date. Two of the fills from C.8 (C.7
and C.2) were very similar to the upper fill of the previous ditch (C.3 in ditch C.5). As the fills within
both ditches are quite similar it is likely that they fell into disuse at approximately the same time. All
the indicators suggest that these two ditches were the remains of one field boundary, also originally in-
corporating a bank. The southeastern ditch (C.8) travelled southwest to a point where it was truncated
by another ditch (C.15) and it did not continue further beyond this. In contrast, the other parallel
ditch (C.5) was truncated by two ditches to the south (C.15 and C.35) but continued beyond them and
beyond the excavated area. This ditch (C.5) was also cut by the flue of the kiln (Plate 1 shows the kiln
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 6
12. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
and nearby ditches before excavation with the kiln flue clearly truncating the ditch).
6.2 The Kiln
The kiln was located towards the northern end of the excavated area (Fig. 6). It consisted of a relatively
large circular bowl cut (C.54) with a flue (C.19) extending to the southwest. It was the flue cut which
truncated the field boundary ditch (C.5) (Plate 1).
The bowl (C.54) measured 2.72 m east-west, 2.87 m north-south. It had almost vertical straight sides
which came to a flat base, producing a sizable pit to a depth of about 0.7 m (Fig. 8). The flue (C.19)
was orientated northeast-southwest and entered the bowl on the southern side where the opening was
cut to a width of 0.84 m. The base of the flue rose steadily from the base of the bowl to just over 4 m
away where it terminated at ground level. As the base became shallower, the sides of the flue cut also
splayed - changing from vertical to gently sloping– and widened to over 2.6 m. In total, the bowl and
flue denoted a structure of approximately 7 m in length.
Once the main cutting of the kiln had been completed it is possible that the builders tested the mer-
its of the location they had chosen and the depth of their kiln. In this instance, a trampled charcoal
spread (C.173) may be explained as the result of use of the kiln before its construction was finished;
it lay at the centre of the base of the bowl and may be associated with the earliest ephemeral burning
deposits within the flue (C.172). Subsequent alterations were made after this phase of burning and the
subsoil was removed from the side of the bowl to the east and west of the flue aperture. This cut (C.171)
created an overhang on the western side of the bowl. The void behind the stone lining around the bowl
(C.136) was filled by a sandy silt (C.170).
The circumference of the base of the bowl was lined with stones (C.136), the only break being at
the flue opening (Plate 2). Within this circle of stones the base was divided into quadrants, each one
filled with stones (C.136) covered in lime residue (Plate 3). The stone-rows within the kiln bowl were
separated from each other by up to 0.2 m and laid in a cruciform pattern, continuing the line of the
flue, and defining quadrants within the bowl. The conduits between each quadrant were coarsely
lintelled (C.142 and C.160) to create a complex air circulation system throughout the kiln. These air
ducts (C.59 and C.57) were filled with debris (C.155, C.156, C.158 and C.161) and materials which
indicated kiln use, such as charcoal and burnt lime. Three of the relatively solid quadrants (or quar-
ter-circles C.136) each had further consolidating deposits laid above them. These (C.94, C.134 and
C.135) were of orange silty sand, were of substantial extent and all had been heat altered. The fourth
quadrant in the northeast had a small deposit (C.117) which consisted of ashy grey sandy silt that was
probably related to the use of the kiln.
Although it is possible the orange deposits (C.94, C.134 and C.135) related to a working platform as
was hypothesised during excavation, it is more likely that these deposits provided mass to which latent
heat transferred and thus aided a prolonged heating process. Furthermore, the fact that a consolidation
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 7
13. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
layer was absent from the quadrant furthest to the rear of the bowl (C.54) may have allowed the air to
funnel through to the back of the kiln, thus balancing the heat distribution throughout.
At the aperture of the flue the stone lining (C.136) gave way to redeposited topsoil (C.148) which had
been packed on each side of the flue. This was covered by lintel stones (C.162) which would have se-
cured the opening but had definitely subsided over time. The remainder of the flue cut (C.19) evidently
had side stones (C.114) but only a few of these remained (Fig. 9). The fact that the capstones (C.162)
had shifted somewhat was evidenced by a patchwork of deposits above the stones; overlying the lintels
were two deposits (C.146 and C.144) of redeposited and scorched naturals and above these were three
further deposits (C.127, C.125 and C.124) of sandy silt, each sealing the flue canal. (The complexity
of this series of deposits is illustrated in the mid-excavation plan Fig. 9).
The flue cut (C.19) to the southwest of the lintels (C.162) was the location of multiple burning epi-
sodes, including several deposits indicative of raking out of ashes and burnt soil. At the southwestern
end of the flue (C.19), as it splayed out at ground level, a charcoal stained spread (C.139) signified these
episodes of ash removal. Approximately half way down the external part of the flue, a hearth spread
(C.138) remained, which consisted of burnt clays and charcoal (Plate 4 and Fig. 9). This comprised
lenses of ashy material which probably represented a sequence of firings with only short time periods
separating each event. It occupied the entire floor of the northern half of the flue. Both the hearth
(C.138) and the rake-out (C.139) were covered by a layer of further raked/disturbed material (C.125).
This red sandy silt (C.125) was heavily oxidised and littered with residue from burning and so was re-
lated to hearths and previous firings. It had been disturbed - probably raked – and banked up against
the southeast side of the flue (Plate 5). This was probably to clear the northwest side of the flue chan-
nel so that the kiln could be used without entirely removing previous hearth material. This remaining
channel was later partially backfilled with two deposits (C.95 and C.111). Both were about 0.1 m thick
and had sparse evidence for burning activity. One (C.95) closed the start of the flue at the southwest,
while the other (C.111) covered the remainder of the hearth (C.138) further down the flue. The largest
of the surviving side stones (C.114) of the flue then collapsed over the latter deposit (C.111). To put the
flue beyond use it was backfilled with a mottled friable material (C.88) which contained occasional
charcoal and covered the entire northwestern side of the flue.
Within the bowl, changes had also occurred during the lifespan of the kiln. A number of fills had col-
lapsed into the chamber, filling it slowly from all sides. Immediately overlying the quadrants (C.136)
and their sand packing (C.94, C.134 and C.135) were four fills (C.112, C.113, C.115 and C.116) (Fig.
9). On the southeastern side, a small deposit (C.112) had been indirectly heat affected. Similarly, a
much larger deposit (C.113) on the eastern side produced evidence of indirect heating. It was also
likely that this fill had been deposited before the final firing of the kiln as small pieces of charcoal were
frequent in its composition. On the western side a fill (C.115) was found to show the same residual
evidence and a small deposit (C.116) to the north was almost identical. These fills (C.112, C.113, C.115
and C.116) were all a product of kiln use and collectively illustrate heat related subsidence from all
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 8
14. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
sides above the kiln. The relatively insubstantial amounts concerned did not block the air flow through
the kiln. Overlying these initial fills was a more substantial crescent-shaped deposit (C.110) which
was thickest over the flue entrance and presumably collapsed from this side, as it was absent from the
northern side. This was a discoloured, charcoal flecked, residual layer from when the kiln was active
and, although substantial, it would not have prevented heat circulation within the kiln.
The kiln appeared to fall into disuse beyond this period and most of the fills within the bowl repre-
sented the destruction of chamber or related material. Overlying the fill within the bowl (C.110), an
un-burnt fill (C.87) was found which only occasionally produced charcoal flecks and scorched natu-
ral. At the same time a greenish grey clay deposit (C.91), containing frequent mortar and moderate
charcoal flecks, was backfilled over the central point of the cruciform flue system and effectively put
this system out of use. Allied to this was clayey silt (C.90) deposited on the southern side. This was a
compacted mottled layer that suggested that kiln material, probably rake-out, was used in the purpose-
ful backfill of the bowl. A less mottled deposit (C.89) was dumped above this and further up the side
of the bowl. On the side nearest the flue, three similar fills (C.84, C.85 and C.86) of brown silt, all
with inclusions of burnt lining (baked natural), were identified high on the edge. These were distinct
deposits and C.85 and C.86 were divided by a much darker silt spread (C.79) to the west. This dark
deposit (C.79) produced some burnt stone but nothing else indicative of heat transfer. There was a
subsequent central backfill of the bowl characterised by a firm sandy silt (C.76) with pebbles as well as
pieces of weathered limestone and charcoal flecks. A further dump of dark silt (C.75) was deposited on
the southern slope of the bowl and contained occasional charcoal and burnt stone. A spread of material
(C.73) was tipped from the east edge and was similar to that which had been tipped from the south
(C.75). Both were probably originally cleared from the flue before being backfilled at a later date. On
the south side a further layer (C.72) was deposited, again indicating deliberate backfilling, but with
less evidence that the soil was previously an active component within the kiln. These were covered by
deposits C.71, an un-sorted, sterile brown pebbly silt that did not indicate any association with use of
the kiln and C.70, a green sandy silt which also seems unlikely to have been connected with any direct
kiln activity. A dark broad fill (C.69) of sandy silt with charcoal flecks covered these layers and most of
the southern and eastern sides of the pit. The deposit was disturbed and so was not burned in situ, but
this fill indicates a period of activity in the late medieval/post-medieval period, as some charcoal in the
deposit returned a radiocarbon date of cal AD 1450-1650 (Beta-219132, see Appendix 5).
The opposite side of the bowl appeared to be backfilled with comparatively few deposits. High on the
north edge, a previously heated sandy silt (C.68) was dumped. At approximately the same time a large
reddish brown deposit (C.67) was tipped from the southern side. Another backfilled deposit (C.66)
was dumped on top from the southwest side; it included layers of broken shale which suggest that
this material originated as subsoil, perhaps removed when the kiln was constructed. A smaller deposit
(C.65) to the south also included shale. An additional grey pebbly crescent shaped deposit (C.64) was
found high on the southwestern edge. It was overlain by a layer (C.62) of black silt with occasional
flecks of charcoal. Following this, natural subsoil (C.60), most likely from the original cutting of the
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 9
15. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
kiln (C.54), was backfilled from the west. Yet another fill (C.56) of black silt that contained evidence of
burning was then tipped in from the west, over which still more natural subsoil (C.55) was deposited.
A small patch of strongly cemented pebbly sand (C.53) was found to have been dumped high on the
southwest edge and this had been covered by a layer (C.52) of yellowish orange clay. An insubstantial
dark silt (C.47) was then deposited on this followed by a further pebbly deposit (C.46). The southern
half of the remaining kiln hollow was then covered with natural subsoil (C.44) which almost certainly
originated from the kiln cut (C.54) as this subsoil had charcoal flecking. On the north side of the kiln
redeposited natural subsoil (C.42) was tipped (backfilled) from the west. Two dark burnt soils (C.41
and C.40) were then dumped on top of this. Both areas of redeposited natural (C.42 and C.44) were
then covered with a broad burnt deposit of sandy silt (C.39) which contained inclusions of charcoal
and possible burnt kiln lining which may have originated from a kiln cleaning episode. Backfilling
continued at the western side of the kiln, and two more burnt brown silt deposits (C.37 and C.36)
were tipped from the western edge. C.36 was then covered with a sequence of pebbles (C.34 and C.32)
and more burnt sandy silts (C.33, C.31, C.28 and C.20). This sequence was sealed beneath a broad
fill of stony redeposited natural subsoil (C.30) which had been dumped in from the southwest. A dark
reddish black sand (C.26) was then deposited on C.30. Across the southern side a final large fill of
brown stony silt (C.23) was dumped. The final fills evident in the kiln bowl (C.54) were less substantial
(C.16, C.17, C.18 and C.20), all produced evidence of burning.
The flue cut (C.19), while put beyond use by a substantial fill (C.88), would still have remained as a
depression. At the end nearest the flue aperture, this depression was backfilled further with brown silty
clay (C.83). Above this and to the southwest, light ashy silt (C.77) was deposited before burnt mottled
silt (C.74) was banked up on the flue aperture. The fills at the northern end of the flue were then cov-
ered with mottled redeposited natural (C.63) which had probably originated from the cutting of the
flue (C.19). At the southwest end of the flue three deposits (C.45, C.43 and C.38) backfilled the west
side. All produced charcoal flecks and probably represented earlier ‘rake-outs’ events which were later
redeposited. A large brownish red deposit (C.61) with inclusions of charcoal was banked up against
the southeastern side of the flue (C.19). Finally, the flue (C.19) was completely levelled out by a deposit
(C.29) of assorted topsoil, natural subsoil and charcoal flecks.
The bowl section of the kiln (C.54), once filled, was cut into at some later date. This was a sub-circu-
lar pit (C.12), approximately 2 m in diameter with moderate concave sides, with the exception of the
northern side which was almost vertical (Plate 6). It was dug to a depth of 0.44 m and the base was
irregular. The sides of the cut were not oxidised and they were not burned in situ. The primary fill
(C.11) of the pit only represented previous backfills of the kiln bowl which had been cut through and
then redeposited. The uppermost fill (C.9) was brown sandy silt with occasional flecks of burnt natural
and charcoal, but again not indicative of a function for the pit (C.12). This late pit cut may suggest
that the site was intended to be reopened and that this task had commenced and was then abandoned
before completion.
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 10
16. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Eighteen samples from the kiln were examined for plant remains and for the extraction of material
from the heavy residues left after flotation. Limited quantities of charred macroplant fragments were
discovered in the samples (see Appendix 6) and these may have been used as fuel or tinder in the kiln.
Weathered limestone (identified by R. Unitt) was found in three contexts associated with the kiln bowl
(C.136, C.155 and C.156) and this may have been a raw material for kiln use if lime was prepared. Any
residual lime from use as a limekiln would have quickly dissolved in water and would not necessarily
leave a trace (R. Unitt, pers. comm.).
6.3 Industrial Area - Work Surface
Approximately 30 m to the south of the kiln an area of intense archaeological activity was interpreted
as a work surface (Fig.6). This was recorded as twelve layers of archaeological deposits. These layers
were partially truncated by furrows (C.80 and C.81).
The earliest activity encountered was represented by two cuts; C.154 and C.141 (Fig. 10). The eastern
of the two (C.154) was a relatively shallow stakehole, which tapered and inclined towards the south.
This was filled by an orangey red clay deposit (C.153 – similar to C.140 detailed below). The other
feature (C.141) was a sub-circular pit with a cut that had a steep side at the west, while elsewhere the
sides sloped gently to a blunt rounded base. The first deposit in the sequence (C.143) partially filled
this pit cut (C.141), although most of it was found to the east of the stakehole (C.154). This spread was
not found over the stakehole and it is possible that the timber stake was still in place when charcoal
spread was deposited. The charcoal spread (C.143) comprised black clay with stones and frequent char-
coal, probably hearth material removed from the pit cut (C.141). A thick fill (C.140) of orangey red
clay filled the remainder of the pit and also sealed the charcoal spread and the stakehole. This material
(C.140) contained no finds but was probably hearth related material from elsewhere.
A large layer (C.92) of redeposited natural overlay this, and extended in all directions beyond the previ-
ous contexts. It contained numerous pottery fragments (Finds 00E0476:92:1-35) and after refitting by
the pottery specialist these were identified as thirty sherds of Leinster Cooking Ware (Appendix 4). A
piece of iron slag, a possible furnace bottom, was also found in this deposit. This layer formed a surface
of unknown function.
Three small lenses of burnt clay (C.137) were deposited on top of this surface; the burnt clay produced
no finds and was not in situ. Overlying this was an elongated (east-west) charcoal spread (C.93) which
contained many pottery fragments (00E0476:93:1-39), refitted to form thirty-four sherds of Leinster
Cooking Ware (Appendix 4). The deposit appeared to have been scattered here as it was very thin with
poorly defined edges. Another large layer (C.82) covered the charcoal and more or less mirrored the
extent of the previous layer. It comprised dark brown clay with moderate amounts of charcoal and
burnt clay and large amounts of Leinster Cooking Ware (00E0476:82:1-88), which were refitted to
produce seventy-eight sherds (Appendix 4). A further large layer of dark brown silty clay with moder-
ate charcoal inclusions (C.48) was deposited directly on the surface (Fig. 11) and it also produced sev-
eral pottery fragments (00E0476:1-18), possibly residual from the lower layer (C.82). Also above C.82,
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 11
17. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
in the northeast, was a crescent shaped deposit (C.78) that consisted of black silty clay with frequent
charcoal. This was probably hearth material raked to the side of a hearth (C.51), which was defined by
an area of burnt clay and edged by the crescent shaped deposit (C.78) at its southeastern extent.
This hearth (C.51) was on the interface with the topsoil and so had been partially truncated by agricul-
tural activity. Millstone fragments (Appendix 7) were recovered from this location during monitoring
of topsoil removal within the development site (Finds no. 00E0476:1:18-19). These finds suggest the
possibility that the hearth was associated with processing cereals (heat is often required to harden grain
and facilitate grinding). Indeterminate fragments of grains and grasses were retrieved from a sample
of the hearth (Appendix 6). It is also possible that the millstones were part of general waste that was
dumped at this part of the site, representing domestic (pottery) and industrial (slag) activities.
The surfaces and layers at this part of the site may have been deliberately laid work surfaces that were
constructed by moving waste and debris from other areas of activity, or perhaps the remains signify a
sequence of dumping, rather than deliberate deposition, in one area. Either way, the hearth laid at the
very highest level of these layers may have been for work or for waste disposal purposes.
6.4 Hearth and Stakeholes
Between the kiln and the working area there was another small area of archaeological activity that
comprised numerous stakeholes and a circular pit (Fig. 12). The pit (C.97) contained two fills (C.96
and C.59), with the basal fill (C.96) identified as redeposited natural subsoil which contained no arte-
facts or archaeobotanical material (Appendix 6) and there was no evidence to indicate its origin. Both
fills contained moderate amounts of broken slate and the upper fill (C.59) resembled hearth material.
As a consequence the pit has been interpreted as a hearth.
A stake had been inserted into the northern part of this hearth (C.59). The sub-circular stakehole
(C.123) tapered to a point and inclined to the northeast. This stakehole (C.123) was filled with reddish
brown gravel (C.122).
Immediately north of the hearth five stakeholes (C.101, C.129, C.131, C.133 and C.103) were found
clustered together (Fig. 12). Three of these (C.101, C.131 and C.133) were circular, one oval (C.103)
and one sub-circular (C.129). All were roughly the same depth (c. 0.1 m) except for the central stakehole
(C.133) which was shallower (0.05 m) and set completely vertical. The others (C.101, C.129, C.131,
and C.103) were generally inclined towards a central point (east, southwest, southwest and northeast
respectively). These contained separate but similar fills (C.100, C.102, C.128, C.130 and C.132) of
reddish brown silty clay with inclusions of fine pebbles and charcoal. No artefacts were recovered.
Approximately 0.6 m north of the latter group, an isolated sub-circular stakehole (C.99), which was
‘U-shaped’ and set vertically, contained a fill (C.98) identical to those identified in the other stake-
holes.
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 12
18. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Three further stakeholes (C.105, C.107 and C.109) were located to the south of the hearth (C.59).
The western-most of these (C.105) was a circular stakehole of similar depth to those elsewhere; it leant
slightly away from the hearth (to the southwest). This was filled by C.104, the same reddish brown
silty clay encountered in stakeholes to the north of the hearth. Directly south of the hearth, an ovate
stakehole (C.107) orientated southwest-northeast was excavated. This was shallow (0.05 m) but filled
with the similar brown silty clay (C.106). The stake here would have inclined to the southeast. Finally,
the third stakehole (C.109) south of the hearth was sub-circular and inclined to the southwest. This
was filled with light brown silty clay (C.108) with only very occasional charcoal inclusions.
This isolated area of archaeology must be interpreted as a hearth with associated spit or cooking
furniture. Although there were no connections between any of the stakeholes they were probably all
broadly contemporary. The stakes were generally aligned north/northwest to south/southeast across
the hearth, some clustered together at the north. This was the only area of the site where cereal grains
were relatively frequent (mostly identified as oats and barley, see Appendix 6) and it is an area that may
have been used for cooking or processing grain. However, there was no evidence for the date of this
activity at the site and it is difficult to relate it to either the kiln to the north or the medieval deposits
to the south.
6.5 Later Land Division - Ditches
Two ditches (C.15 and C.35) traversed the site and these encompassed and were aligned with the later
furrows. These ditches ran parallel to one another and were orientated east-west (Fig. 6). They both
truncated earlier ditches (C.5 and C.8).
The northern of the two ditches (C.15), contained three fills; C.4, C.13 and C.14 (Fig. 13). Both sides
of the ditch cut (C.15) were stepped, but the northern side was slightly steeper. The primary fill (C.14)
consisted of burnt clay with high instances of charcoal. It appeared that wood and scrub had been
burned in places intermittently along the base of the ditch. This was in turn covered by a fill (C.13)
of orange silty clay which was probably redeposited natural subsoil and it may represent the collapse,
or purposeful backfill, of a field bank. One fragment of Leinster Cooking Ware (Find 00E0476:13:1,
identified in Appendix 4) was also incorporated into the fill. A sherd was also recovered from the ear-
lier ditch (C.8). Disturbance and truncation probably led to the redeposition of earlier pottery into the
fills of both ditches. The upper fill (C.4) of the ditch was brown silty clay, formed primarily through
natural silting of the ditch, perhaps accelerated by agricultural activity in the vicinity, evidenced by the
presence of furrows to the south (see below).
Another ditch (C.35) ran parallel to the south. It was approximately half as wide and only half as deep
as C.15 and it had moderate concave sides sloping to a flat base. The basal fill (C.27) was brownish
orange silty clay, comparable to the middle fill of the northern ditch (C.13). It also had inclusions of
charcoal, again suggesting intermittent burning activity. The ditch was finally filled with a dark brown
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 13
19. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
deposit (C.24) comparable to the upper fill of ditch C.15. Although the ditch cuts (C.15 and C.35)
were quite different, the fills indicate similar formation processes, and they were probably back-filled
simultaneously. The redeposited fills C.13 and C.27 suggest a bank had been built between the ditches
from the up-cast of the cuts.
These ditches signify the enclosing of land which contained the evidence for ridge and furrow agricul-
ture.
6.6 Furrows
Approximately 25 furrows traversed the site and survived in various degrees of preservation (Plate 7).
They were all roughly parallel to one another and were orientated north-northwest – south-southeast
(Fig. 6). These were recorded diligently where it was suspected that the line of the furrow truncated
earlier activity. As these were homogeneous, the furrows at locations with no underlying archaeology
will not be discussed here.
Only two furrows (C.80 and C.81) passed over archaeology (the working area C.48). Both were of a
shallow depth and were filled with brown silty clay (C.49 and C.50 respectively). These fills contained
charcoal and pottery (Finds 00E0476: 49:1-5 and 00E0476:50:1-20), after refitting these were identi-
fied by the pottery specialist as twenty-three sherds of Leinster Cooking Ware (Appendix 4) which
were probably disturbed from the underlying layer (C.48).
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 14
20. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
7 Artefacts and Industrial Waste
The most common artefacts retrieved from this site were fragments of ceramic pottery which were ex-
amined by Clare McCutcheon (Appendix 4). These were primarily retrieved from contexts that made
up the work surface. After refitting were two hundred and two sherds of Leinster Cooking Ware were
identified, with four vessel noted: two cooking jars, a lamp and a platter or slab that was probably used
as a serving dish. These were all domestic wares.
Industrial waste from the site was analysed by Effie Photos-Jones (Appendix 8). This comprised one
lump of slag that was found in the layers that made up the work surface and it was identified as slag
that formed after roasting, possibly in preparation for a smelt.
Fragments from millstone (Plate 8) were recovered during topsoil monitoring at the site and these were
the subject of a visual examination by the geologist Richard Unitt (Appendix 7). It was identified as
Red-brown, clast supported, immature conglomerate and the granular stone was probably deliberately
chosen as a raw material for the millstone since its rough texture created a good grinding surface (R.
Unitt pers. comm.). This stone is described in Appendix 7.
These finds are catalogued in the Finds Register in Appendix 3. The pottery and slag were retrieved
from the work surface and the millstone fragments were retrieved from topsoil during monitoring.
8 Environmental Remains
Charcoal was only found in two of the samples from the site and this was assessed by Mary Dillon in
advance of radiocarbon dating (Appendix 9). Martha Tierney examined forty-five samples for plant
remains from the site but no charred seeds were found in any of the samples (see Appendix 6).
9 Discussion
The main features of the sites included early land divisions (ditches), a work surface with residues from
various industrial activities, a hearth surrounded by stakeholes/hearth furniture, later land divisions
(ditches) that enclosed ridges and furrows and a kiln. The archaeological evidence from the site is gen-
erally indicative of activity associated with agriculture, incorporating a kiln, furrows, boundaries and
drainage ditches. The hearth and a work/industrial surface to the south of the site do not appear to be
related and their purpose or function remains puzzling.
The most complex sequence of archaeological deposits at the site was excavated at the kiln, which can
be summarised as follows: a bowl and flue cut, with the flue splayed at its entrance (see Plate 9). The
base of the flue was inclined, with the highest point at the flue entrance and the lowest at the point
where it met the base of the bowl. Stone-lined air conduits in a cruciform pattern were found at the
base of the bowl and they continued from the line of the flue and allowed the efficient distribution
of heat within the kiln. There was evidence for successive firings and rake-outs from the bowl. At the
end of its use the kiln flue was apparently deliberately blocked, although there was some evidence to
suggests that there may have been attempts to recut the bowl. However, this was not successful and
kiln was abandoned.
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 15
21. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
This site was initially interpreted as a grain drying kiln and appears in a gazetteer of excavated grain
drying kilns (Monk and Kelleher 2005, 109). It now appears that this classification is mistaken. The
absence of large quantities grain or plant remains in any of the kiln deposits (Appendix 6) is one argu-
ment against the interpretation of the site as a grain drying kiln. In addition, the series of kilns exca-
vated during this project were significantly bigger than the usual size of excavated keyhole shape grain
drying kilns; chamber diameters ranged from 0.32 m to 1.6 m in most surveyed examples (Monk and
Kelleher 2005, 81), while the chamber at this site was c. 2.8 m in diameter, in line with the sizes noted
for the few excavated examples of late medieval/early post-medieval limekilns known from Ireland (see
comparative table below).
Table of comparative details for excavated examples of Irish limekilns
Site County Orientation Total length Bowl Length Bowl Width Bowl Depth Flue length Flue width
Ballymount Great 97E0316 Dublin 1.2 0.71
(Conway 1998)
Laurence’s Street, Drogheda Louth 3.4 3.4
98E0544
(Murphy 2000)
Custom House 97E0028 ext Galway NW-SE 3.5 3.5 >1
(Delaney 2000)
Nicholas Street Site F Dublin N-S Bowl and 1.88 1.8 1.55 No flue N/A
(Walsh 1997) stokehole found
c.2.2 m
Danecastle, Carrick-on-Bannow Wexford NNW-SSE Not fully 3.48 1.64 5.04 4.35-1.35
04E0855 excavated
(Ó Drisceoil 2004-5)
Bohercrow road, Murgasty Tipperary E-W 8.5 c. 3.5? 3.48 1.2 c. 5?
97E0026
(Cummins 1999)
Bricketstown 00E0476 Wexford NE-SW 7 2.87 2.72 0.7 4 0.84 to
2.6
Bricketstown 00E0626 Wexford NNE-SSW 7 c. 3 c. 3 1.25 4 1 to 2
Harristown Little 00E0417 * Wexford NNE-SSW 3.7 * 2.7 2.7 0.52 1* 1
* indicates truncation, full extent unknown
? indicates that measurements are estimates based on summary measurements given
Other excavated limekilns include Drogheda (Campbell 1987) and Tullyallen 5 (Campbell 2001) in
Co. Louth, Kilkenny Castle (Sweetman 1976) and Callan (Moran 2001) in Co. Kilkenny, two lime
kilns at Mondaniel (03E1094), Co. Cork (Quinn 2006) and one limekiln at 8-9 Lower Abbey St.,
Sligo 98E0216 ext (Hayden 1999).
Additional suggestions that this was a limekiln come from the structural remains at Bricketstown
(00E0476), in particular the air vent at the base of the kiln bowl. This was constructed from stones
and arranged in a cruciform pattern to allow an even distribution of air through the kiln. The constant
distribution of air during lime burning was crucial as this ensured that the procedure occurred evenly
(Bick 1984) and ventilation channels would have promoted good results from the kiln. This facility
was more impressive than the simple earth cut channel found at the base of the other Bricketstown
kiln (00E0626). A kiln similar to the Bricketstown example was found at Dromthacker, Co. Kerry
(Cleary 1998) with cruciform air vents at the base. These vents were earth-cut rather than stone lined
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 16
22. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
flues and although no radiocarbon date was obtained the structure was interpreted as a nineteenth
century limekiln.
The baked substratum found at each of these Wexford kilns indicated extreme heat, and at Brckets-
town (00E0476) there was evidence that the walls of the kiln, cut into the subsoil, had been subject
to extremely high temperatures (see Plate 10 of post-ex of kiln bowl). This is comparable to the results
from another excavation in Co. Wexford; at Danecastle, Carrick-on-Bannow Ó Drisceoil (2004-5)
noted that a limekiln was lined with a mixture of clay and crushed sandstone which had baked rock-
hard in the heat of the kiln. Temperatures inducing such baking must have been far in excess of the
requirements for drying grain and hard-baked subsoil is not usually a noted feature of grain drying
kilns. Temperatures reached during experimental firings of grain drying kilns were never in excess of
65ºC (Monk and Kelleher 2005, 97-100) while the temperatures required for making lime is usually
near the 900ºC mark (Stowell 1963, 10; Hale et al. 2003).
A more recent limekiln was recorded along the route of the Harristown-Rathsillagh realignment,
within the townland of Ballyvergin, which was shown on the 1st edition OS map and was said to have
been in use only 70 years prior to its destruction (Elder 2001). It was located 2 km northwest of the
site at Bricketstown. This kiln appears to have been a successor to the earlier examples excavated at
Harrisown Little and Bricketstown. It’s existence is proof of the availability of suitable raw materials
for lime burning in the general area. The post-medieval example from Ballyvergin was cut into a field
boundary and in this it resembles the other kiln sites (at Bricketstown 00E0626 and 00E0476 and at
Harristown Little 00E0417), which are all associated with ditch complexes that have been interpreted
as relict field boundaries.
Permanent structure limekilns fall into two basic types, draw kilns or flare kilns. The type found at
Bricketstown (00E0476) fits into descriptions of flare kilns. These kilns were operated by placing a
single consignment of stones (such as limestone, marble or chalk) and interspersed with fuel such as
fuel and charcoal. These were loaded from the top of the kiln. These stones contain calcite (calcium
carbonate) which can be heated to produce calcined lime or quicklime (CaCO3 + heat → CaO + CO2).
The heat source came from the hearth which was lit at the base of the kiln. These needed to be big fires
as heating only at low temperatures causes a reversible reaction, and allows the re-absorption of atmos-
pheric carbon dioxide. The process is only reversible if temperatures have exceeded 900ºC, releasing all
the carbon dioxide. Once the fire was lit it required several days of burning before the limestone was
calcined. The end product, quicklime, was retrieved from the bottom of the kiln. The entire procedure
of lime burning was “more an art than a science”, being dependent on the weather (wind strength and
direction) and the quality of both raw materials and fuel supplied (Bick 1984).
Quicklime is an alkaline crystalline solid which is caustic but it has several uses; used in building
work as a bonding agent (an ingredient in mortar), in render, in whitewash, and as fertiliser (Rynne
1999), although its use for the latter purpose in Ireland generally dates to the period around the mid
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 17
23. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
seventeenth century (Ó Drisceoil 2004-5). The date returned from charcoal in this Bricketstown kiln
may overlap with this (cal AD 1450-1650). Rynne (1999, 29) notes that most small limekilns, citing
as example a stone-built kiln with a 2.2 m diameter bowl (Power et al. 1994, 334), were probably used
only intermittently for the production of small quantities of lime to be used for agricultural purposes.
The bowl of this Bricketstown kiln was a similar small size, perhaps indicating that its primary use was
for the production of agricultural lime.
By the late seventeenth century thousands of acres in Ireland had been improved by manuring and
liming, including areas of Co. Wexford, where “all sorts of excellent bread, corn, grain, orchards,
fruits, sweet herbs, meadows, pastures for all sorts of cattle” were the produce of land that was “not
naturally fertile” (Molyneux 1680s, cited in Clarkson and Crawford 2001, 15-16). By the late eight-
eenth century Young (1780) commented that the Irish farmers were accomplished lime burners, and
that this was the primary form of “manure” or fertiliser that they used.
The working surface, situated 30 m south of the kiln, was identified as an earlier, feature based on
the assemblage of medieval pottery (Leinster Cooking Ware, see Appendix 4). Numerous sherds of
Leinster Cooking Ware were also found during excavation of the moated site at Carrowreagh, 1.3 km
northwest, and three contexts associated with this pottery type produced radiocarbon dates from cal
AD 1300-1430. This suggests that the work surface at Bricketstown may have predated use of the kiln
(use dated to between cal AD 1450-1650 (Beta 219132). However, the deposit that the pottery was
taken from resembles a dump of material (slag was also found) and it may simply represent the clearing
away of waste from an earlier settlement or industrial area.
The kiln was associated with several ditches, probably relict field boundaries and it truncated one of
these, indicating that construction of the kiln predated the enclosure of the land and the formation of
some of the boundaries. These marked property boundaries, protected arable fields against wild and
domestic animals, enclosed domestic animals to protect from predators, and provided shelter, etc. (see
Groenman-van Waateringe 1981). Some of the field boundary ditches evidently enclosed the furrows
that ran northwest-southeast across the southern part of the site. All of the limekilns excavated along
the route of the N25 Rathsillagh-Harristown road were associated with ditches that have been inter-
preted as field boundaries. Kilns are often associated with boundaries as they were frequently cut into
banks to provide shelter during firing and to facilitate top loading of the kiln.
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 18
24. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
10 Summary
The site comprised six archaeological parts; early land divisions (ditches), a limekiln, a working surface,
a hearth with stakeholes, later land divisions (ditches) and furrows. The latest features were ridge and
furrows, they were bound by ditches which acted as field divisions and/or drains. Underlying the fur-
rows two separate areas of activity were encountered. The first of these consisted of a number of stake-
holes and a hearth, while the second was a working surface. The kiln, which post-dated one of the field
boundaries, was also excavated. The archaeological excavation at this site indicates continuous agrarian
and quasi-industrial activity in the area from the late medieval period onwards. The division of land,
through the use of ditches and implied banks, both before and after use of the kiln, draws attention to
the sub-division and consolidation of property through time.
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 19
25. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
11 References
Bennett, I. 2004-5. ‘Archaeological Excavations in Co. Wexford’, Journal of the Wexford Historical
Society 20, 184-196.
Bick, D. 1984. ‘Limekiln on the Gloucestershire-Herefordshire border’, Industrial Archaeology Review
VII (1), 85-93.
Campbell, K. 1987 ‘The archaeology of medieval Drogheda’, Archaeology Ireland 2.
Campbell, K. 2001 ‘Tullyallen 5, Co. Meath’, in Bennett, I. (ed.) Excavations 1998. Bray, Wordwell.
Clarkson, L.A. and Crawford, E.M. 2001. Feast and Famine. Food and Nutrition in Ireland 1500-
1920. Oxford, Oxford University Press.
Cleary, R.M. 1998. ‘Dromthacker’, pp. 85-86 in I. Bennett (ed.) Excavations 1997. Bray, Wordwell.
Colfer, B. 1987. ‘Anglo-Norman Settlement in County Wexford’, pp. 65-101 in Whelan, K. (ed.)
Wexford History and Society. Interdisciplinary essays on the history of an Irish county. Dublin,
Geography Publications.
Colfer, B. 1990-1991. ‘Medieval Wexford’, Journal of the Wexford Historical Society 13, 4-29.
Conway, M. 1998. ‘Ballymount Great, Co. Dublin’, in Bennett, I. (ed.) Excavations 1997. No. 079.
Cotter, C. 1986. ‘MacMurroughs, Co. Wexford’, in Cotter, C. (ed.) Excavations 1985. Dublin, Irish
Academic Publication for Organisation of Irish Archaeologists.
Cummins, T. 1999. ‘Bohercrow Road, Murgasty, Co. Tipperary’ in Bennett, I. (ed.) Excavations 1998.
Bray, Wordwell.
Delaney, D. 2000. ‘Custom House, Flood Street/Courthouse Lane, Galway’, in Bennett, I. (ed.)
Excavations 1999. Bray, Wordwell.
Elder, S. 2001. ‘Archaeological Monitoring Report 00E0379’, Unpublished report for Eachtra
Archaeological Projects.
Green, S. W. and Zvelebil, M. 1990. ‘The Mesolithic colonisation and agricultural transition of south-
east Ireland’, Proceedings of the Prehistoric Society 56, 57-88.
Groenman-van Waateringe, W. 1981. ‘Field boundaries in Ireland’, pp. 285-290 in Ó Corráin (ed.)
Irish Antiquity. Dublin, Four Courts Press.
Hale, J., Heinemeier, J., Lancaster, L., Lindroos, A. and Ringbom, A. 2003. ‘Dating ancient mortar’,
American Scientist 91 (2).
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 20
26. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Hayden, A. 1999. ‘8-9 Lower Abbey Street Sligo’, in Bennett, I. (ed.) Excavations 1998. Bray,
Wordwell.
Howarth, O.J.R. 1911. A Geography of Ireland. London, Oxford Geographies.
McCarthy, M. 2004. ‘Strandfield, Co. Wexford’, pp. 520-521 in Bennett, I. (ed.) Excavations 2002.
Bray, Wordwell.
McLoughlin, C. 2004. ‘Kerlogue’, pp.517-518 in Bennet, I. (ed.) Excavations 2002. Bray, Wordwell.
Mitchell, F. and Ryan, M. 1997. Reading the Irish Landscape. Dublin, Town House.
Monk, M. and Kelleher, E. 2005. ‘An assessment of the archaeological evidence fro Irish corn-drying
kilns in the light of the results of archaeological experiments and archaeobotanical studies’,
Journal of Irish Archaeology XIV.
Moore, M. 1996. Archaeological Inventory of County Wexford. The Stationary Office, Dublin.
Moran, J. 2000. ‘Ballyanne, Co. Wexford’, in Bennett, I. (ed.) Excavations 1998. Bray, Wordwell.
Moran, J. 2001. ‘Tinnamoona, Chapel Lane, Callan’, in Bennett, I. (ed.) Excavations 2000. Bray,
Wordwell.
Murphy, D. 2000. ‘Former Drogheda Grammar School, Laurence’s Street, Drogheda’, in I. Bennett
(ed.) Excavations 1999. Bray, Wordwell.
Ó Drisceoil, C. 2004-5. ‘Excavation of a Limerkiln at Danceastle, Carrick-on-Bannow’, Journal of the
Wexford Historical Society 20, 203-208.
O’Keeffe, T. 2000. Medieval Ireland, An Archaeology. Stroud, Tempus.
O’Kelly, M.J. 1975. ‘Archaeological Survey and Excavation of St. Vogue’s Church, Enclosure and
Other Monuments st Carnsore, Co. Wexford’, Unpublished excavation report for the Electricity
Supply Board.
Power, D., Lane, S., Byrne, E., Egan, U., Sleeman, M., Cotter, E. and Monk, J. 2000. Archaeological
Inventory of County Cork Vol. 4 Part 2. Dublin, The Stationery Office.
Purcell, J. 2004. ‘St. Vogue’s’, p.520 in Bennet, I. (ed.) Excavations 2002. Bray, Wordwell.
Purcell, A. 2002. ‘Courtlands East, Co. Wexford’, in Bennett, I. (ed.) Excavations 2000. Bray,
Wordwell.
Quinn, A. 2006. ‘Mondaniel 3 03E1094 Co. Cork’, in Bennett, I. (ed.) Excavations 2003. Bray,
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 21
28. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
12 Figures
Figure 1: Discovery map showing the route of the N25 Rathsillagh-Harristown road
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 23
29. 00E0476
Bricketstown, Co. Wexford
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/
00E0471
00E0474
00E0473
00E0626
00E0424
Legend 00E0623 00E0417
New Road
00E0475
Existing N25
00E0625
New Archaeological Sites 00E0476
00E0624 00E0425
1km
Figure 2: Ordnance Survey 1st edition showing the route of the N25 Rathsillagh-Harristown road
24
ISSUE 4: Eachtra Journal - ISSN 2009-2237
30. 00E0476
Bricketstown, Co. Wexford
DE 18
LIS
TE1531
D
14 21
D 20
13 173131 EL
IS
19 TE
D
67 16
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/
25
00E0471 24
00E0474
23
00E0473
00E0626
00E0424
00E0623 52
00E0417
Legend
New Road 00E0475
Existing N25
D
00E0625 64
New Archaeological Sites EL 00E0476
IS 33 00E0624 00E0425
1km TE 58
D
3232
Figure 3: RMP sheet showing the route of the N25 Rathsillagh-Harristown road
25
ISSUE 4: Eachtra Journal - ISSN 2009-2237
31. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Figure 4: Route of new road with all excavated sites displayed
500m
0m
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 26
32. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Figure 5: Plan of excavated area within the context of modern field and road boundaries
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 27
33. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Figure 6: Plan of the excavated area showing the three main areas of archaeological activity (kiln,
hearth and stakeholes, the working surface) and ditches
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 28
34. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
W 0m E 1.20m
C. 3
C.10
Natural C.5
W 0m E 1.30m
C.2
C.6
C.7
C.8 Natural
0 1m
Figure 7: Sections through early land division ditches (C.5 and C.8)
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 29
35. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Figure 8: Post-excavation plan of the kiln bowl and flue (C.54 and C.19)
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 30
36. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Figure 9: Mid-excavation plan of the kiln bowl and flue (C.54 and C.19)
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 31
37. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
C.143
C.154
C.143
C.141
0 1m
Figure 10: Earliest activity at the medieval work surface (C.154 and C.141)
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 32
38. 00E0476 Bricketstown, Co. Wexford ISSUE 4: Eachtra Journal - ISSN 2009-2237
Figure 11: Work surface truncated by furrows (C.80 and C.81)
Permalink: http://eachtra.ie/index.php/journal/e0476-bricketstown-co-wexford/ 33