Optimization of edm for mrr of inconel 600 using taguchi methodsushil Choudhary
Electrical discharge machining (EDM) process is convert electrical energy into heat energy between the work piece and tool electrode in the presence of dielectric fluid like, EDM oil, to process conductive difficult-to-machine materials. EDM process is has been applicable in the machining of hard, brittle and all kinds of electric conductive materials. This process widely used for produces die making, mould making, complex shapes, deep holes and other geometrical shapes as per desire. Inconel 600 super alloy materials widely used in various types of industries such as: aerospace, aircraft, nuclear, food processing, pulp manufacturing, automobiles industry etc. In this study, investigations on the effect of process parameters on machining of Inconel 600 super alloy material. Tungsten carbide material used as tool electrode and EDM oil used as dielectric fluid. The effects of input process parameters such as pulse-on-time, peak current and gap voltage on performance measure material removal rate was investigated using Taguchi method. MRR is lineally increases with the increase in peak current during the EDM process. MRR is increases with the increase in gap voltage. Initially MRR increases with increase in pulse on time then decreases with the increase of pulse on time.
LSG-1800CCD/LSG-1700CCD goniospectroradiometer is an automatic goniophotometer instrument for luminous intensity distribution measurement with facility for rotating the light source.
Optimization of edm for mrr of inconel 600 using taguchi methodsushil Choudhary
Electrical discharge machining (EDM) process is convert electrical energy into heat energy between the work piece and tool electrode in the presence of dielectric fluid like, EDM oil, to process conductive difficult-to-machine materials. EDM process is has been applicable in the machining of hard, brittle and all kinds of electric conductive materials. This process widely used for produces die making, mould making, complex shapes, deep holes and other geometrical shapes as per desire. Inconel 600 super alloy materials widely used in various types of industries such as: aerospace, aircraft, nuclear, food processing, pulp manufacturing, automobiles industry etc. In this study, investigations on the effect of process parameters on machining of Inconel 600 super alloy material. Tungsten carbide material used as tool electrode and EDM oil used as dielectric fluid. The effects of input process parameters such as pulse-on-time, peak current and gap voltage on performance measure material removal rate was investigated using Taguchi method. MRR is lineally increases with the increase in peak current during the EDM process. MRR is increases with the increase in gap voltage. Initially MRR increases with increase in pulse on time then decreases with the increase of pulse on time.
LSG-1800CCD/LSG-1700CCD goniospectroradiometer is an automatic goniophotometer instrument for luminous intensity distribution measurement with facility for rotating the light source.
Solar energy is one of the most promising renewable sources that is currently being used worldwide to contribute for meeting rising demands. In this paper solar irradiance measurement will experimentally carried out in two different regions in Egypt; Cairo and Luxor cities. This paper proposes a simple solar lux measurement using a light dependent resistor (LDR) with an arduino kit. This technique is based on two approaches which are coarse and fine maximum sun lux determination. This is based on the predetermined 260 vertical slop of the LDR. Coarse tuning determines one of the reach sun lux quarter (900) of horizontal quad. The fine tuning allocates the optimized 100 in which; the maximum sun lux can be obtained. The optimal values of sun lux were found between the (90o–180o) quarter. This study confirms that the narrow ten degrees (95o-105o) are the optimized static sun lux extraction for the two site field measurements. This novel technique can be used for locating the angle of best installations for the solar cell at which maximum solar energy can be extracted.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A Study on Stochastic Thermal Characterization of Electronic PackagesIJERA Editor
Insofar as the electronics can be found now in several applications of multiple domains, we have tried to
highlight in this study that, those systems must be based on unquestionable reliability and meet the needs of the
external environment. Starting from the unit "°c / w" concerning the thermal resistance from the gap between
junction temperature and a reference temperature, we have tried to compare the thermal performance of
electronic packages taking into consideration the thermal management. Our approach is based on the Monte
Carlo simulation and the stochastic characterization of the QFN. From the norm of normalization, we have
obtained standardized data sheets allowing accurate comparisons of the thermal performance of electronic
packages as produced by different manufacturers. Our numerical model through simulation, prototyping
concerning the design involves the JEDEC recommendations, which we consider a very interesting alternative.
Through the deterministic analysis, we conducted an analysis from the Matlab program parameters, which
control the Ansys software, the results were processed by statistical techniques to evaluate the times of the
thermal resistance of the QFN. That is why we must consider the electronic package (encapsulating the
integrated circuit), through the printed circuit board (PCB) to ensure the junction temperature maintenance and
avoid the dissipation of the heat. Also our process was based on the union of the finite element method to the
Monte Carlo simulation and stochastic characterization of the QFN.
Keywords: Electronic package; Finite element method; printed
A Novel Approach for Precise Motion Artefact Detection in Photoplethysmograph...AM Publications
PPG signal is a useful tool for quick and critical diagnosis related to cardiovascular output via wearable or portable devices. Its drawback is unreliable during non-stationary states due to occurrences of frequency overlap of the desired and motion artifact signals. The accelerometer is usually used to reflect the motion artifact when the adaptive noise cancellation technique is implemented to address this obstacle, but it failed to predict the value of real induced noise accurately. In this work, we investigate a new concept that is capable of providing the entire motion artifact separately by recruiting twin photodetectors to formulate the influential signals. The main function of photo-detector (MPD) is to generate the corrupted PPG signal. While the second photo-detector (CPD) that covered up from the light effect, will be used to reflect the corruption effect that exists in both sources simultaneously by counting the generated dark photocurrent (GDPC). To validate the GDPC approach, experiments were executed to analyze the response of two methods during steady and motion state. Results showed resemblance responses for both methods regarding the’ amplitude fluctuations and high positive correlations in the time domain. Furthermore, the FFT peak plots in frequency domain indicated the potential of CPD to reflect all fundamental frequencies caused by motion, unlike the acceleration approach. Therefore, the proposed concept is a sure-fire method to obtain precise measurements at a lower cost.
Accelerometer and EOG Based Wireless Gesture Controlled Robotic ArmIJMER
- This paper deals with the Robotic arm controlled by arm and eye movements, where data
is acquired through the use of accelerometer and EOG amplifier. The hand movements are captured by
the Accelerometer and the eye movements are captured by EOG amplifier. The Robotic arm will pick
and place the object according to the movement of the hand and Robotic arm will move left and right
according to our eye movements. Signals are wirelessly transmitted through RF Encoder and Decoder.
Robotic arm is based on Arduino Duemilanove controller for signal processing, and interfaced with the
Controller serially. This Embedded system will help disabled persons to do work by their own. The
Robotic arm can be used to pick and place hazardous objects.
Data acquisition of wind speed, wind direction and environmental temperature are needed to get the data potential of wind power. The aim of this research is to generate a device of wind speed, wind direction and temperature with the real time condition. With this device, we will obtain an analysis about the potential of wind power electrical generation around the Puger beach, Jember, Indonesia. In this study, parameters investigated were made into three types of measurement variables that measure of wind speed, wind direction, temperature and a data to show real time data..The device which is used to measure wind speed using hall effect sensor as a transducer. With using of the active magnet that spins will be created pwm that will be read by sensor to get the wind speed. As for the shows wind direction, we use a compass sensor CMPS 03 is a digital sensor that outputs in the form of digital bits so that be able to show wind direction from 0° to 360°. The magnitude of angle will be used in analyzing the direction of the wind, the real time clock (RTC) will be used to directly to determine the time and date of recording data. Then the temperature DS1621 sensor to show environmental temperature.
This paper presents an electromagnetically-actuated micropump for microfluidic application. The system comprises two modules; an electromagnetic actuator module and a diffuser module. Fabrication of the diffuser module can be achieved using photolithography process with a master template and a PDMS prepolymer as the structural material. The actuator module consists of two power inductors and two NdFeB permanent magnets placed between the diffuser elements. The choice of this actuation principle merits from low operating voltage (1.5 Vdc) and the flow direction can be controlled by changing the orientation of the magnet vibration. Maximum volumetric flow rate of the fabricated device at zero backpressure is 0.9756 μLs-1 and 0.4659 μLs-1 at the hydrostatic backpressure of 10 mmH2O at 9 Hz of switching speed.
Unconstrained health monitoring and effective position tracking using wireles...eSAT Journals
Abstract
The paper introduces a wireless sensor network platform specifically designed for the protection of workers employed in the building sector. The network configuration makes use of GSM communication which provides a more efficient and long range wireless transmission. The system has been developed to determine two different kinds of information, heart beat rate and latitude and longitude corresponding to the location of each worker. These data provide a periodic update of both health and position inside their working environment by sending SMS to higher officials. The sensor node is embedded on the worker garment by integrating within the fabric which forms a unique structure. This system provides a secure environment for the safety of constructional workers by the real-time monitoring of their working surface.
Keywords—GSM communication; Wireless Sensor Netowrks; Real-time monitoring; safety.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Respiration Monitoring System of Lung Phantom Using Magnetic SensorjournalBEEI
Monitoring vital signs is substantial in healthcare to assist both diagnosis and treatment. This work proposes a means of telemonitoring system at initial stage to observe respiratory pattern on lung phantom. Magnetic sensor module LDC1000 is used to read inductance value of conductive material in relation to distance variation. Therefore, respiration pattern can be observed. In continuous mode, the inspiration inductance value is 8 uH, while expiration is 17 uH, with stoppage is 17 uH. For static measurement, the inspiration inductance value is 7.80 uH, while expiration is 16.46 uH and stoppage is 16.46 uH. Those values could be further referred for vital signs telemonitoring system design based on contactless and portable devices.
Solar energy is one of the most promising renewable sources that is currently being used worldwide to contribute for meeting rising demands. In this paper solar irradiance measurement will experimentally carried out in two different regions in Egypt; Cairo and Luxor cities. This paper proposes a simple solar lux measurement using a light dependent resistor (LDR) with an arduino kit. This technique is based on two approaches which are coarse and fine maximum sun lux determination. This is based on the predetermined 260 vertical slop of the LDR. Coarse tuning determines one of the reach sun lux quarter (900) of horizontal quad. The fine tuning allocates the optimized 100 in which; the maximum sun lux can be obtained. The optimal values of sun lux were found between the (90o–180o) quarter. This study confirms that the narrow ten degrees (95o-105o) are the optimized static sun lux extraction for the two site field measurements. This novel technique can be used for locating the angle of best installations for the solar cell at which maximum solar energy can be extracted.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
A Study on Stochastic Thermal Characterization of Electronic PackagesIJERA Editor
Insofar as the electronics can be found now in several applications of multiple domains, we have tried to
highlight in this study that, those systems must be based on unquestionable reliability and meet the needs of the
external environment. Starting from the unit "°c / w" concerning the thermal resistance from the gap between
junction temperature and a reference temperature, we have tried to compare the thermal performance of
electronic packages taking into consideration the thermal management. Our approach is based on the Monte
Carlo simulation and the stochastic characterization of the QFN. From the norm of normalization, we have
obtained standardized data sheets allowing accurate comparisons of the thermal performance of electronic
packages as produced by different manufacturers. Our numerical model through simulation, prototyping
concerning the design involves the JEDEC recommendations, which we consider a very interesting alternative.
Through the deterministic analysis, we conducted an analysis from the Matlab program parameters, which
control the Ansys software, the results were processed by statistical techniques to evaluate the times of the
thermal resistance of the QFN. That is why we must consider the electronic package (encapsulating the
integrated circuit), through the printed circuit board (PCB) to ensure the junction temperature maintenance and
avoid the dissipation of the heat. Also our process was based on the union of the finite element method to the
Monte Carlo simulation and stochastic characterization of the QFN.
Keywords: Electronic package; Finite element method; printed
A Novel Approach for Precise Motion Artefact Detection in Photoplethysmograph...AM Publications
PPG signal is a useful tool for quick and critical diagnosis related to cardiovascular output via wearable or portable devices. Its drawback is unreliable during non-stationary states due to occurrences of frequency overlap of the desired and motion artifact signals. The accelerometer is usually used to reflect the motion artifact when the adaptive noise cancellation technique is implemented to address this obstacle, but it failed to predict the value of real induced noise accurately. In this work, we investigate a new concept that is capable of providing the entire motion artifact separately by recruiting twin photodetectors to formulate the influential signals. The main function of photo-detector (MPD) is to generate the corrupted PPG signal. While the second photo-detector (CPD) that covered up from the light effect, will be used to reflect the corruption effect that exists in both sources simultaneously by counting the generated dark photocurrent (GDPC). To validate the GDPC approach, experiments were executed to analyze the response of two methods during steady and motion state. Results showed resemblance responses for both methods regarding the’ amplitude fluctuations and high positive correlations in the time domain. Furthermore, the FFT peak plots in frequency domain indicated the potential of CPD to reflect all fundamental frequencies caused by motion, unlike the acceleration approach. Therefore, the proposed concept is a sure-fire method to obtain precise measurements at a lower cost.
Accelerometer and EOG Based Wireless Gesture Controlled Robotic ArmIJMER
- This paper deals with the Robotic arm controlled by arm and eye movements, where data
is acquired through the use of accelerometer and EOG amplifier. The hand movements are captured by
the Accelerometer and the eye movements are captured by EOG amplifier. The Robotic arm will pick
and place the object according to the movement of the hand and Robotic arm will move left and right
according to our eye movements. Signals are wirelessly transmitted through RF Encoder and Decoder.
Robotic arm is based on Arduino Duemilanove controller for signal processing, and interfaced with the
Controller serially. This Embedded system will help disabled persons to do work by their own. The
Robotic arm can be used to pick and place hazardous objects.
Data acquisition of wind speed, wind direction and environmental temperature are needed to get the data potential of wind power. The aim of this research is to generate a device of wind speed, wind direction and temperature with the real time condition. With this device, we will obtain an analysis about the potential of wind power electrical generation around the Puger beach, Jember, Indonesia. In this study, parameters investigated were made into three types of measurement variables that measure of wind speed, wind direction, temperature and a data to show real time data..The device which is used to measure wind speed using hall effect sensor as a transducer. With using of the active magnet that spins will be created pwm that will be read by sensor to get the wind speed. As for the shows wind direction, we use a compass sensor CMPS 03 is a digital sensor that outputs in the form of digital bits so that be able to show wind direction from 0° to 360°. The magnitude of angle will be used in analyzing the direction of the wind, the real time clock (RTC) will be used to directly to determine the time and date of recording data. Then the temperature DS1621 sensor to show environmental temperature.
This paper presents an electromagnetically-actuated micropump for microfluidic application. The system comprises two modules; an electromagnetic actuator module and a diffuser module. Fabrication of the diffuser module can be achieved using photolithography process with a master template and a PDMS prepolymer as the structural material. The actuator module consists of two power inductors and two NdFeB permanent magnets placed between the diffuser elements. The choice of this actuation principle merits from low operating voltage (1.5 Vdc) and the flow direction can be controlled by changing the orientation of the magnet vibration. Maximum volumetric flow rate of the fabricated device at zero backpressure is 0.9756 μLs-1 and 0.4659 μLs-1 at the hydrostatic backpressure of 10 mmH2O at 9 Hz of switching speed.
Unconstrained health monitoring and effective position tracking using wireles...eSAT Journals
Abstract
The paper introduces a wireless sensor network platform specifically designed for the protection of workers employed in the building sector. The network configuration makes use of GSM communication which provides a more efficient and long range wireless transmission. The system has been developed to determine two different kinds of information, heart beat rate and latitude and longitude corresponding to the location of each worker. These data provide a periodic update of both health and position inside their working environment by sending SMS to higher officials. The sensor node is embedded on the worker garment by integrating within the fabric which forms a unique structure. This system provides a secure environment for the safety of constructional workers by the real-time monitoring of their working surface.
Keywords—GSM communication; Wireless Sensor Netowrks; Real-time monitoring; safety.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Respiration Monitoring System of Lung Phantom Using Magnetic SensorjournalBEEI
Monitoring vital signs is substantial in healthcare to assist both diagnosis and treatment. This work proposes a means of telemonitoring system at initial stage to observe respiratory pattern on lung phantom. Magnetic sensor module LDC1000 is used to read inductance value of conductive material in relation to distance variation. Therefore, respiration pattern can be observed. In continuous mode, the inspiration inductance value is 8 uH, while expiration is 17 uH, with stoppage is 17 uH. For static measurement, the inspiration inductance value is 7.80 uH, while expiration is 16.46 uH and stoppage is 16.46 uH. Those values could be further referred for vital signs telemonitoring system design based on contactless and portable devices.
Gestión curricular y uso de tic. de la institución al aula tarea finaladricabrera
A través de esta presentación comparto con ustedes un modesto proyecto. Los invito a analizarlo juntos, y compartir otras líneas acción. Una vez acordados los aspectos pertinentes, nos comprometeremos al cumplimiento de los objetivos; siempre buscando el beneficio de nuestra institución educativa y por ende de nuestros estudiantes.
DESIGN AND THERMAL ASPECTS OF WATER COOLED PRIMARY MIRROR FOR SYNCHROTRON RAD...IAEME Publication
This paper describes the thermal analysis of water cooled primary mirror used in BL-23 of Indus-2 at RRCAT in which the mirror thermal deformation was minimized for acceptable optical performance. The primary mirror separates the visible part from synchrotron radiation by reflecting visible part to perpendicular plane. In worst condition the primary mirror will be subjected to intense heat load of 150 W, primarily due to X-Ray absorption. This intense heat load will distort the reflecting surface
Deep learning with filtering for defect characterization in pulsed thermograp...IJECEIAES
Pulsed thermography is widely used for non-destructive testing of various materials. The temperature profile obtained after pulse heating is used to characterize the underlying defects in an object. In this paper, the automation of the process of defect visualization and depth quantification in pulsed thermography through various deep learning algorithms is reported. Stainless steel plate with artificial defects is considered for analysis. The raw temperature data is smoothed using moving average, Savitzky-Golay and quadratic regression filters to reduce noise. Thermal signal reconstruction, the conventional method to eliminate noise, is also used for generating filtered datasets. Defect visualization refers to identifying and locating the defects in an image sample and Mask region convolutional neural network (Mask R-CNN) is considered for not just detecting the defects but also locating them on the image. The located defects are utilized for depth estimation using the following networks-multi-layer perceptron (MLP), long short-term memory (LSTM) and gated recurrent units (GRU). The input to the networks is the temperature contrast characteristics which symbolizes the difference in temperature over defective and non-defective areas measured over 250 time points and output of the networks is the estimated depth. The study shows that LSTM based approach provides the least percentage error of 5.5% and is a very suitable approach for automation of defect characterization in pulsed thermography.
Electro Discharge Machining (EDM) is a
non-traditional machining process, based on thermo electric
energy between the work piece and electrode. In this process,
the material removal is occurred electro thermally by a series
of successive discrete discharges between electrode and the
work piece. Electro Discharge Machine which has the ability to
machine hard, difficult to machine material and parts with
internal complex shape by using precisely controlled sparks
that occurs between electrode and work piece in the presence
of dielectric fluid. This spark removes material from both work
piece and electrode. Material Removal Rate (MRR) is of
crucial importance in this process. In this research experiment
has been done along with Copper and Graphite tool material as
well as Mild Steel and Aluminium material has been used as
work piece. Three major Control Parameters named as
Electrode Speed (V), Current (I) and Depth of Cut (h) are
considered to determine their influence on MRR. In this
experiment three levels of each parameter has been taken and
an analysis has been made to find out the influence of control
parameters on MRR using S/N Ratio and ANOVA Analysis
TCAD Simulations and Small Signal Modeling of DMG AlGaN/GaN HFET IJECEIAES
This article presents extraction of small signal model parameters and TCAD simulation of novel asymmetric field plated dual material gate AlGaN/GaN HFET first time. Small signal model is essential for design of LNA and microwave electronic circuit by using the proposed superior performance HFET structure. Superior performances of device are due to its dual material gate structure and field plate that can provide better electric field uniformity, suppression of short channel effects and improvement in carrier transport efficiency. In this article we used direct parameter extraction methodology in which S-parameters of device were measured using pinchoff cold FET biasing. The measured S-parameters are then transformed into Y-parameters to extract capacitive elements and then in to Z-parameters to extract series parasitic elements. Intrinsic parameters are extracted from Y-parameters after de-embedding all parasitic elements of devce. Microwave figure of merits and dc performance are also studied for proposed HFET. The important figure of merits of device reported in the paper include transconductance, drain conductance, current gain, transducer power gain, available power gain, maximum stable gain, maximum frequency of oscillation, cut-off frequency, stability factor and time delay. Reported results are valdated with experimental and simulation results for consistency accuracy.
TEMPERATURE MONITORING AND LOGGING SYSTEM SUITABLE FOR USE IN HOSPITALS, INCO...ijistjournal
In this paper, a microcontroller-based temperature monitoring and logging system suitable for use in hospitals was designed and constructed. The features include ability to monitor a patient’s temperature on a continuous basis while displaying the instant result on a Liquid Crystal Display (LCD) device. The temperature monitored is logged in a memory device, Electrically Erasable Programmable Read Only Memory (EEPROM), located in the system at every 10 minutes interval and can be interfaced with a computer using USB or RS232 UART device. An ATmega16 AVR is used as the heart of the control and coordination of all the activities of the individual modules. It allowed a doctor at location from the patient to keep track of his patient’s condition while attending to other issues.
EDM machining is used for very hard and complex cutting of conducting materials with
higher surface finish and close dimensions. EDM process parameters are affected by both electrical
and non electrical parameters. In this paper, cutting of hard material Stainless steel 316 is done on
electro discharge machine with copper as cutting tool electrode. This paper presents the effect of
control factors (i.e., current, pulse on time, pulse off time, fluid pressure) for maximum material
removal rate (MRR) and minimum electrode wear rate (EWR) for die sinking Electric Discharge
Machine. In this paper both the electrical factors and non electrical factors has been focused which
governs MRR and EWR. Paper is based on Design of experiment and optimization of EDM process
parameters. The technique used is Taguchi technique which is a statistical decision making tool helps
in minimizing the number of experiments and the error associated with it. The research showed that
the Pulse off time, Current has significant effect on material removal rate and electrode wear rate
respectively
OVERVIEW AND APPLICATION OF ENABLING TECHNOLOGIES ORIENTED ON ENERGY ROUTING ...ijaia
Energy routers are recent topics of interest for scientific community working on alternative energy.
Enabling technologies supporting installation and monitoring energy efficiency in building are discussed in
this paper, by focusing the attention on innovative aspects and on approaches to predict risks and failures
conditions of energy router devices. Infrared (IR) Thermography and Augmented Reality (AR) are
indicated in this work as potential technologies for the installation testing and tools for predictive
maintenance of energy networks, while thermal simulation, image post-processing and data mining
improve the analysis of the prediction process. Image post- processing has been applied on thermal images
and for WiFi AR. Concerning data mining we applied k-Means and Artificial Neural Network –ANNobtaining
outputs based on measured data. The paper proposes some tools procedure and methods
supporting the Building Information Modeling- BIM- in smart grid applications. Finally we provide some
ISO standards matching with the enabling technologies by completing the overview of scenario
Optimization of Empirical Modelling of Advanced Highly Strained In 0.7 Ga 0.3...IJECEIAES
An optimized empirical modelling for a 0.25µm gate length of highly strained channel of an InP-based pseudomorphic high electron mobility transistor (pHEMT) using InGaAs–InAlAs material systems is presented. An accurate procedure for extraction is described and tested using the pHEMT measured dataset of I-V characteristics and related multi-bias s-parameters over 20GHz frequency range. The extraction of linear and nonlinear parameters from the small signal and large signal pHEMT equivalent model are performed in ADS. The optimized DC and S-parameter model for the pHEMT device provides a basis for active device selection in the MMIC low noise amplifier circuit designs.
A New Design of a CPW-Fed Dual-Band Monopole Antenna for RFID Readers IJECEIAES
This paper comes with a new dual-band planar monopole antenna fed by Coplanar Waveguide (CPW) line designed for RFID readers and it operates at 2.45 GHz, 5.80 GHz. This antenna is designed with reasonable gain, low profile and low cost production. The designed antenna based on theoretical equations is simulated and validated by using ADS from Agilent technologies and CST Microwave Studio electromagnetic solvers. A parametric study of the proposed antenna has been carried out by optimizing some critical parameters. The antenna has a total area of 35×38 mm2 and mounted on an FR4 substrate with dielectric permittivity constant 4.4 and thickness of 1.6 mm and loss tangent 0.025. The comparison between simulation and measurement results permits to validate the final achieved antenna structure in the desired RFID frequencies bands. Details of the proposed antenna design and both simulated and experimental results are described and discussed.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.