This document contains architectural drawings and details for a proposed building project including a first floor plan, mezzanine floor plan, roof plan, elevations, building sections, and wall sections. The plans show the layout of rooms and spatial relationships. Building elements like structural systems, exterior wall assemblies, and ceiling types are labeled. Dimensions, materials, and other construction information is provided in schedules.
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
The document contains details and specifications for insulation installation for a new freezer store, including:
- Details for a door threshold, airlock, and horizontal sliding door dimensions.
- Specifications for 15dv polystyrene insulated panels with 0.55mm thick metal skins for walls, ceilings, and doors.
- Dimensions for freezer rooms, walls, ceilings, and other structural elements.
- Joint details for ceiling to wall connections, with and without steps, and wall to wall joints.
- References to additional drawing details.
The document is a site plan for installing insulation at a blast freezer area. It shows the layout of new blast freezers, staging areas, doors, and insulation panels. Key aspects include installing 200mm thick insulation panels on the blast freezers and airlock, and referencing other drawings for structural details, insulation details, and an overall floor plan layout.
The document contains technical drawings for an entrance door including orthographic views, sections and details. It includes a double margin door design with meeting stiles joined by folding wedges. Threshold details are provided showing compliance with technical guidance on accessible entrances and moisture resistance. Dimensions and materials are specified for the door frame and components.
The document contains details and specifications for installing insulation panels for walls, ceilings, and doors of a cold storage facility. It includes dimensions and materials for joints between wall and ceiling panels, wall and wall panels, and provides fixing details for items like chillers, doors, and roof supports. Dimensions noted are for panel thicknesses, flashing, angles, and spacing of fixings. Materials listed include metal panels, insulation, butyl sealants, foam strips, and flashing.
This document is a bill of quantities for the refurbishment of an agricultural laboratory at the University of Liberia. It provides detailed estimates for all materials, labor, and costs associated with renovating the main laboratory building and constructing an addition for a dirty laboratory and entry porch. Line items include estimates for excavation, concrete work, walls, roofing, finishes, doors, windows, electrical, plumbing and more. The total estimated cost for renovating the main building is $161,783.75 and $56,479.50 for the addition, for a grand total project cost of $218,263.25.
BUILDING TECHNOLOGY 2: Project 2- Working Drawing- Construction DrawingAngeline KH
This document contains construction drawings for a proposed 5-storey film theatre building, including floor plans, sections, and elevations. Key features shown are a basement car park, ground floor retail spaces, and upper floors containing a theatre, cafe, studios, and roof garden. Construction details illustrate structural elements like concrete slabs, walls, and steel framing. Dimensions and technical specifications are provided to fully convey the building design for construction.
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
The document contains details and specifications for insulation installation for a new freezer store, including:
- Details for a door threshold, airlock, and horizontal sliding door dimensions.
- Specifications for 15dv polystyrene insulated panels with 0.55mm thick metal skins for walls, ceilings, and doors.
- Dimensions for freezer rooms, walls, ceilings, and other structural elements.
- Joint details for ceiling to wall connections, with and without steps, and wall to wall joints.
- References to additional drawing details.
The document is a site plan for installing insulation at a blast freezer area. It shows the layout of new blast freezers, staging areas, doors, and insulation panels. Key aspects include installing 200mm thick insulation panels on the blast freezers and airlock, and referencing other drawings for structural details, insulation details, and an overall floor plan layout.
The document contains technical drawings for an entrance door including orthographic views, sections and details. It includes a double margin door design with meeting stiles joined by folding wedges. Threshold details are provided showing compliance with technical guidance on accessible entrances and moisture resistance. Dimensions and materials are specified for the door frame and components.
The document contains details and specifications for installing insulation panels for walls, ceilings, and doors of a cold storage facility. It includes dimensions and materials for joints between wall and ceiling panels, wall and wall panels, and provides fixing details for items like chillers, doors, and roof supports. Dimensions noted are for panel thicknesses, flashing, angles, and spacing of fixings. Materials listed include metal panels, insulation, butyl sealants, foam strips, and flashing.
This document is a bill of quantities for the refurbishment of an agricultural laboratory at the University of Liberia. It provides detailed estimates for all materials, labor, and costs associated with renovating the main laboratory building and constructing an addition for a dirty laboratory and entry porch. Line items include estimates for excavation, concrete work, walls, roofing, finishes, doors, windows, electrical, plumbing and more. The total estimated cost for renovating the main building is $161,783.75 and $56,479.50 for the addition, for a grand total project cost of $218,263.25.
BUILDING TECHNOLOGY 2: Project 2- Working Drawing- Construction DrawingAngeline KH
This document contains construction drawings for a proposed 5-storey film theatre building, including floor plans, sections, and elevations. Key features shown are a basement car park, ground floor retail spaces, and upper floors containing a theatre, cafe, studios, and roof garden. Construction details illustrate structural elements like concrete slabs, walls, and steel framing. Dimensions and technical specifications are provided to fully convey the building design for construction.
This floor plan document contains labels and annotations for various rooms, areas, and fixtures on the 12th floor of a building. Key areas include offices, a reception area, conference room, kitchen, bathrooms, a production area with cutting, pattern, and fitting rooms, a showroom, and storage spaces. The plan also provides notes on electrical specifications like outlets, switches, data and phone connections, and a communications closet.
This document contains an architectural plan for a multi-level building with various workshops, studios, and other facilities. It includes floor plans for the ground level, first floor, roof top, upper ground level, and second floor. Sections and elevations are provided with callouts for structural and material details. The document also lists relevant architects, engineers, and the client for the project.
The document describes various methods for manufacturing and testing composite materials and structures. It discusses winding fibers onto a mandrel to create cylinders, using different fiber volume fractions, winding angles, and stacking sequences. It also describes collecting sea water samples, aging test coupons in a hot oil bath, and testing samples in a fixture that applies and measures loads. Finally, it discusses modeling the composites in finite element analysis software by defining elements, materials, layers, and applying loads to simulate and optimize performance.
Saw blades catalog from diamond saw blades manufacturer bsptools.com超 董
diamond wall chaser blades manufacturer
Diamond blades for brick and table saw
Diamond blade for floor saw
Diamond blade for marble and granite
wholesale
The document provides instructions for building an 8-faucet ferro-cement hand washing station with an integrated 2000L water tank. It details the materials and steps needed to construct the reinforced concrete base, walls and tank. These include laying rebar frames, adding drainage pipes, cementing layers and finishing touches like a lid, faucets and float valve to regulate water levels. The station aims to provide a durable and useful water source for hand washing near homes and facilities.
The document contains plans and specifications for insulation installation at a new freezer store. It details new 250mm and 200mm thick insulation panels with fire retardant polystyrene cores and painted metal skins for walls and ceilings. It also specifies support steel, freezer floors, vertical lift doors for blast freezers, horizontal sliding doors, and panel fixing details. The plans show layouts for the new freezer store, loading bays, and staging area.
The document appears to be a portfolio of interior and exterior design projects including residential, commercial, and institutional buildings. It includes sections on reception areas, offices, meeting spaces, warehouses, banks, villas, residential blocks, universities, restaurants and more. For each project, there are drawings of floor plans, elevations, sections, and 3D renderings. Building materials, finishes and furniture are specified. The document shows before and after images of interior and exterior renovations.
This document contains a bill of quantities for a Class D bungalow project. It includes item descriptions, quantities, units, and rates for external walls, internal walls, wall finishes, floor finishes, ceiling finishes, and a summary page. Quantities and costs are provided for various construction materials and tasks such as brickwork, plastering, tiling, and painting of walls, floors and ceilings of the bungalow.
The document provides instructions for constructing an 8-faucet ferro-cement hand washing station in 3 steps. It begins with laying the concrete base and rebar frame. Second, it details building the cement tank walls with reinforcement and attaching drainage pipes. Finally, it describes finishing touches like adding the sink basin, tank lid, and float valve to regulate water flow. The detailed guide allows construction of a durable hand washing facility using locally available cement and rebar materials.
Finishing concrete involves screeding, floating, and trowelling to achieve the desired surface. Screeding strikes off excess concrete using a straight edge to create a uniform surface. Floating removes irregularities using wooden floats, giving a medium non-slip finish. Trowelling obtains a very smooth surface using steel trowels and brings the cement paste to the top. The type of surface needed, such as interior versus exterior, determines the proper finishing technique.
La Unión Europea ha acordado un embargo petrolero contra Rusia en respuesta a la invasión de Ucrania. El embargo prohibirá las importaciones marítimas de petróleo ruso a la UE y pondrá fin a las entregas a través de oleoductos dentro de seis meses. Esta medida forma parte de un sexto paquete de sanciones de la UE destinadas a aumentar la presión económica sobre Moscú y privar al Kremlin de fondos para financiar su guerra.
This document contains a lecture on working with arrays, scripts, and SSH/SCP in UNIX systems. It discusses special variables used in scripts, how to define and manipulate arrays, examples of useful scripts for renaming files, backing up data, and extracting video files from DVDs, and how to use SSH to securely connect to remote systems and SCP to securely transfer files between systems. It also covers generating and using public/private key pairs for passwordless SSH login.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshows.
The presentation is made before a group of young people who have some knowledge of climate change but do not think that they have any role to play in reducing its effect. They are of the view that it’s the government to deal with climate change issues. The presentation aims to show them that they too can contribute in their own way without having to spend as much while going about their daily routine.
This listing provides details for an artist/writer retreat located on an actual working farm with handcrafted country décor in a secluded yet accessible location. The rental includes a kitchenette, queen bed, pull-out sofa, indoor and outdoor showers, and views of the farm animals and land from the windows.
This document advertises new digital marketing certificate programs being offered by UMSL. It provides details on the foundation and elective courses offered, which cover topics such as social media marketing, web analytics, search engine optimization, email marketing, and data analytics. Companies and professionals looking to retrain or enhance their digital marketing skills could consider these 2-3 day classes to earn a certificate. Contact information is provided to learn more.
The document contains plans and specifications for the ground floor of a proposed leisure centre. It includes a ground floor plan showing the layout and dimensions of the various spaces including a 25m pool, leisure pool, sports hall, changing village, reception area and squash courts. It also includes a door schedule listing the doors on the ground floor along with general notes specifying building regulations and standards to be followed for construction including fire resistance ratings for structural elements.
This floor plan document contains labels and annotations for various rooms, areas, and fixtures on the 12th floor of a building. Key areas include offices, a reception area, conference room, kitchen, bathrooms, a production area with cutting, pattern, and fitting rooms, a showroom, and storage spaces. The plan also provides notes on electrical specifications like outlets, switches, data and phone connections, and a communications closet.
This document contains an architectural plan for a multi-level building with various workshops, studios, and other facilities. It includes floor plans for the ground level, first floor, roof top, upper ground level, and second floor. Sections and elevations are provided with callouts for structural and material details. The document also lists relevant architects, engineers, and the client for the project.
The document describes various methods for manufacturing and testing composite materials and structures. It discusses winding fibers onto a mandrel to create cylinders, using different fiber volume fractions, winding angles, and stacking sequences. It also describes collecting sea water samples, aging test coupons in a hot oil bath, and testing samples in a fixture that applies and measures loads. Finally, it discusses modeling the composites in finite element analysis software by defining elements, materials, layers, and applying loads to simulate and optimize performance.
Saw blades catalog from diamond saw blades manufacturer bsptools.com超 董
diamond wall chaser blades manufacturer
Diamond blades for brick and table saw
Diamond blade for floor saw
Diamond blade for marble and granite
wholesale
The document provides instructions for building an 8-faucet ferro-cement hand washing station with an integrated 2000L water tank. It details the materials and steps needed to construct the reinforced concrete base, walls and tank. These include laying rebar frames, adding drainage pipes, cementing layers and finishing touches like a lid, faucets and float valve to regulate water levels. The station aims to provide a durable and useful water source for hand washing near homes and facilities.
The document contains plans and specifications for insulation installation at a new freezer store. It details new 250mm and 200mm thick insulation panels with fire retardant polystyrene cores and painted metal skins for walls and ceilings. It also specifies support steel, freezer floors, vertical lift doors for blast freezers, horizontal sliding doors, and panel fixing details. The plans show layouts for the new freezer store, loading bays, and staging area.
The document appears to be a portfolio of interior and exterior design projects including residential, commercial, and institutional buildings. It includes sections on reception areas, offices, meeting spaces, warehouses, banks, villas, residential blocks, universities, restaurants and more. For each project, there are drawings of floor plans, elevations, sections, and 3D renderings. Building materials, finishes and furniture are specified. The document shows before and after images of interior and exterior renovations.
This document contains a bill of quantities for a Class D bungalow project. It includes item descriptions, quantities, units, and rates for external walls, internal walls, wall finishes, floor finishes, ceiling finishes, and a summary page. Quantities and costs are provided for various construction materials and tasks such as brickwork, plastering, tiling, and painting of walls, floors and ceilings of the bungalow.
The document provides instructions for constructing an 8-faucet ferro-cement hand washing station in 3 steps. It begins with laying the concrete base and rebar frame. Second, it details building the cement tank walls with reinforcement and attaching drainage pipes. Finally, it describes finishing touches like adding the sink basin, tank lid, and float valve to regulate water flow. The detailed guide allows construction of a durable hand washing facility using locally available cement and rebar materials.
Finishing concrete involves screeding, floating, and trowelling to achieve the desired surface. Screeding strikes off excess concrete using a straight edge to create a uniform surface. Floating removes irregularities using wooden floats, giving a medium non-slip finish. Trowelling obtains a very smooth surface using steel trowels and brings the cement paste to the top. The type of surface needed, such as interior versus exterior, determines the proper finishing technique.
La Unión Europea ha acordado un embargo petrolero contra Rusia en respuesta a la invasión de Ucrania. El embargo prohibirá las importaciones marítimas de petróleo ruso a la UE y pondrá fin a las entregas a través de oleoductos dentro de seis meses. Esta medida forma parte de un sexto paquete de sanciones de la UE destinadas a aumentar la presión económica sobre Moscú y privar al Kremlin de fondos para financiar su guerra.
This document contains a lecture on working with arrays, scripts, and SSH/SCP in UNIX systems. It discusses special variables used in scripts, how to define and manipulate arrays, examples of useful scripts for renaming files, backing up data, and extracting video files from DVDs, and how to use SSH to securely connect to remote systems and SCP to securely transfer files between systems. It also covers generating and using public/private key pairs for passwordless SSH login.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshows.
The presentation is made before a group of young people who have some knowledge of climate change but do not think that they have any role to play in reducing its effect. They are of the view that it’s the government to deal with climate change issues. The presentation aims to show them that they too can contribute in their own way without having to spend as much while going about their daily routine.
This listing provides details for an artist/writer retreat located on an actual working farm with handcrafted country décor in a secluded yet accessible location. The rental includes a kitchenette, queen bed, pull-out sofa, indoor and outdoor showers, and views of the farm animals and land from the windows.
This document advertises new digital marketing certificate programs being offered by UMSL. It provides details on the foundation and elective courses offered, which cover topics such as social media marketing, web analytics, search engine optimization, email marketing, and data analytics. Companies and professionals looking to retrain or enhance their digital marketing skills could consider these 2-3 day classes to earn a certificate. Contact information is provided to learn more.
The document contains plans and specifications for the ground floor of a proposed leisure centre. It includes a ground floor plan showing the layout and dimensions of the various spaces including a 25m pool, leisure pool, sports hall, changing village, reception area and squash courts. It also includes a door schedule listing the doors on the ground floor along with general notes specifying building regulations and standards to be followed for construction including fire resistance ratings for structural elements.
1. The document outlines labor productivity rates for various construction activities including excavation, concrete works, masonry, plastering, tiling, painting and other finishes, wood works, metal works, and aluminum works.
2. Labor requirements are provided for each activity in terms of the number of laborers from different trades needed to complete the work in an 8 hour period.
3. Productivity rates are given for each activity, specifying the quantity of the work that can be completed in an 8 hour period by the listed crew.
This document contains construction drawings for a new regional headquarters and showroom including a ceiling plan, external wall section details, and an eaves detail. The drawings show materials, components, and specifications for the proposed building including insulation, fire protection, ventilation, structure, roofing, and facade. The drawings were produced by Dan Palmer for the Bagstock Brick Company project and include a legend, scale, and revisions.
This document contains details and specifications for the construction of building elements including eaves, walls, floors, and windows. It includes materials, dimensions, and thermal and acoustic properties. Sections and elevations with callouts are provided to communicate the assembly of components like cladding, battens, insulation, membranes and fixtures. Performance metrics like u-values are included to indicate the thermal efficiency of the exterior walls and floors.
HRP Manchester Square Court Office_Acoustic_firescreenBruce Battaliou
This document contains architectural drawings and details for witness suites and consulting rooms at a Crown Court project in Manchester. Revisions were made between February and July 2009 to resize drawings, add acoustic breaks, revise ceiling heights and glazing/door details. Drawing layouts and details were redrawn and issued for tender with no further changes in Revision D dated July 1, 2009.
The document provides construction details for a multi-story office and retail building including:
1) Details for the roof structure showing connections between steel beams and columns as well as eaves and drainage details.
2) A detail showing the connection between curtain walling and rainscreen cladding on the 8th floor.
3) Details for the ground floor including load bearing wall connections to curtain walling and fire door head, sill, and jamb details.
4) A detail showing the connection between the building's cavity drainage system and adjacent pavement.
5) A detail of the cavity drainage system for the lower basement level.
The document provides details on the construction of a building using structural glazing and a green roof system. It includes specifications for a precast concrete hollowcore floor slab, rigid insulation, screed, column, paving, and other flooring elements on the ground level. Above this, it describes the use of structural glazing panels supported by steel brackets, plates, and clamps along with insulation and sealants. A green roof system is installed above this consisting of a vapor barrier, growing medium, drainage layer, insulation, and ballasted roof membrane. Removable aluminum and steel components are included to allow access for repair and maintenance of the structural glazing.
This document contains floor plans for a proposed residential building project called Assisi. The ground floor plan shows a layout with 5 bedrooms, 2 bathrooms, a kitchen, dining area, living area, and utility plant. The first floor plan shows 4 bedrooms, 2 bathrooms, an en suite, dressing area, and gallery. Both plans include notes on ceiling and floor joists, walls, and other structural elements. An outline specification is provided for building materials, windows, doors, finishes, and other components.
The document provides details for the construction of a freezer including dimensions for walls, panels, supports, and other structural elements. Measurements are given for wall thicknesses, ceiling heights, panel spacings, and other construction specifications. Details are also shown for the roof support system, insulation, vapor barriers, flooring system, and door thresholds.
This document contains details and specifications for building elements and materials for a proposed healthcare centre, including:
- Floor plans showing room layout and dimensions for the ground and first floors
- Elevations of the building at different levels
- Sections through the building showing floor heights and relationships between spaces
- A site plan showing the building location and context
The document provides construction professionals with the information needed to understand the proposed design and specify materials and assemblies.
The new range of Norton Vulcan cutting-off, grinding wheels, flap discs and diamond blades from Saint-Gobain Abrasives provides a solution for all industrial applications. Vulcan is a multi-solution provider that offers performance, value and convenience.
Saint-Gobain Abrasivesin uusi Norton Vulcan -valikoima katkaisu-, hioma-, lamelli-, ja timanttilaikkoja tarjoaa ratkaisun kaikkiin teollisuuden tarpeisiin. Vulcan on monipuolinen ratkaisu, joka tuo tehoa, käyttöarvoa ja -mukavuutta.
This document contains construction details and specifications for a multi-story building including a market place and offices. It includes details on the exterior wall, ground floor, upper floor, balcony floor, glazing system, and roof constructions. All materials and dimensions are specified according to relevant National Building Specification standards. Elevations, sections and plans are provided at a scale of 1:20.
This document contains architectural drawings and details for a development project in Dale End. It includes 13 drawings numbered A800-A813 relating to sections, structural connections, foundations, wall connections, cladding details, and more. The drawings were created by Hashim Rasool and reference the Dale End Development project number from March 2016.
The document provides details of an existing building including floor levels, elevations, sections, construction details, and existing defects. It then shows proposed upgrades to improve energy efficiency and comply with building regulations, including replacing windows and doors, improving wall, roof, and floor insulation, and installing a rainscreen cladding system. Key changes include installing rigid insulation, achieving improved u-values of 0.16 for roofs and 0.14 for walls, and using triple glazed windows with a u-value of 0.78.
This document contains architectural drawings and details for the St. Mary's Healthcare Centre project. It includes floor plans, elevations, sections and construction details at various scales. The drawings were created by Daniel Palmer for his Architectural Technology course and were revised by Sarah Radif. They provide layouts and technical specifications for the proposed building.
This document provides a bill of quantities for various construction works. It includes pricing for:
1. Preliminaries such as site supervision, rubbish disposal, scaffolding, and screens.
2. Demolition of existing structures like walls, doors, windows, and finishes.
3. Groundworks including excavation, filling, compaction, and geotextile membranes.
4. Concrete works like foundations, beds, and filling hollow walls.
5. Masonry works including brick walls, block walls, damp proof courses, and padstones.
6. Structural framing made of steel columns, beams, and timber floor and wall members.
7. Cl
This document provides details on the components of the Safeguard Fastframe Drylining System including plasterboard, seals, tapes, drainage systems, insulation, and cladding materials. It also includes section details showing wall, floor, roof, window, and fire protection construction elements. Floor plans show the layout of the lower basement, upper basement, ground floor, mezzanine, and first through eighth floors including areas, dimensions, and functional spaces. Building sections and elevations provide additional construction information.
This document provides a bill of quantities for the construction of a shelter for a pilot balloon. It includes items for the substructure, superstructure, doors and windows, electrical installations, and surface finishes. The substructure involves excavation, disposal of materials, hardcore filling, and a concrete floor bed. The superstructure includes reinforced concrete columns, beams, and a roof slab. It also involves block wall construction. Other items include windows, water pipes, electrical wiring and outlets, rendering, and painting. The total cost is summarized across the various elements of the shelter's construction.
This document provides specifications for Fortress single door pillars, which are available in 6 sizes of mild or stainless steel. It lists the dimensions, materials, finishes, and options for the pillars. An ordering code is also described that consists of the pillar size, material thickness, material type, and available options.
11. 915
2134
915
2134
M_Single-Flush M_Single-Glass 1 M_Double-Glass 1
1830
2134
610
610
915 1143
610
406
1830
610
1830
915
1830
915
1830
1195
M_Fixed M_Fixed
M_Skylight
M_Fixed M_Fixed M_Fixed M_Instance - Fixed
Scale
Checked by
Drawn by
Date
Project number
1 : 20
02/08/20131:30:27PM
Schedules
2013-001
Final Project -
SCDC
Mark Harris
02/08/2013
MBMP Design
Checker
A111
No. Description Date
Window Quantities
No. of Window Description Window Type Size Head Height Level
4 M_Fixed 16 0406 x 1830mm 2135 Mezzanine Floor
2 M_Fixed 12 0610 x 0610mm 3454 First Floor
2 M_Fixed 17 0610 x 1830mm 2135 First Floor
1 M_Fixed 14 0915 x 0610mm 3800 First Floor
24 M_Fixed 18 0915 x 1830mm
48 M_Instance - Fixed 26 0915 x 1830mm
21 M_Skylight 22 1180 x 1170mm Top of Mezzanine
Grand total
Door Schedule
Count Door Description Function Door Type Size Head Height Thickness Level
1 M_Curtain Wall-Store Front-Dbl Exterior 39 Store Front Double Door First Floor
2 M_Double-Glass 1 Interior 26 1830 x 2134mm 2134 51 First Floor
3 M_Single-Flush Interior 8 0915 x 2134mm 2134 51 First Floor
11 M_Single-Glass 1 Interior 31 0915 x 2134mm 2134 51 First Floor
Grand total
1 : 20
Door Elevations
1 : 20
Window Elevations
MBMP Design