Alternative (but unused) Ancillary Ideas
โขDownload as PPT, PDFโข
0 likesโข116 views
The document shows 8 alternative ideas and samples the creator generated for a poster project. These included combining photos after color correction, creating a full image rather than just taking parts, and extracting a frame from video footage and adjusting the hue and saturation to recreate a nighttime scene and enhance shadows.
Report
Share
Report
Share
Recommended
Final Prep
This document discusses the final preparations for a magazine cover, including choosing a font from DaFont for the masthead, editing the font for a music artist in Photoshop to be turquoise blue, selecting an image of the artist with a white background for the main cover photo to make text clear, and selecting the Prestige Elite Std font for the cover.
Photo selection for double page spread 1
The photographer reviewed several photos for a double page spread but found one photo too bright as the flash made the model too bright, another photo was okay but didn't show the whole model, and a third photo was too dark.
How effective is the combination of your main product and your ancillary texts?
The document discusses how the combination of a main film project and ancillary texts like a poster and review are effective. Key elements like color scheme, fonts, and images are used consistently across the projects to maintain continuity and effectively represent the horror genre. Red, black, and white are the main colors. Fonts are chosen for clarity and to highlight important information. Images portray the narrative and genre through composition and use of color. Background textures add depth and mystery.
FinallllHow effective is the combination of your main product and your ancill...
The document discusses how the combination of a main film project and ancillary texts like a poster and review are effective. Key elements like color scheme, fonts, and images are used consistently across the projects to maintain continuity and effectively represent the horror genre. Red, black, and white are the main colors. Fonts are chosen for clarity and to highlight important information. Images portray the narrative and genre through composition and use of color. Background textures add depth and mystery.
Image editing
This document summarizes the editing process for three images intended for a dubstep music magazine. For the first image, the artist was photographed against a plain background and used spot lighting to create warmth, then the background was removed and contrast was increased. The second image was also taken against a plain background with spot lighting, but was converted to black and white. The third image showed the artist looking down at equipment with spot lighting and was also converted to black and white. Overall, minimal editing techniques were used to maintain natural-looking images.
__
The document discusses photos the author considered and used for the cover and contents page of a magazine. The cover photo was edited in Photoshop to fix blemishes and enhance features like eye color. The contents photo was cropped to remove an unflattering shadow and later edited in Photoshop to match the magazine's color scheme. An unedited photo was also cropped for the contents page.
Magazine experiments
The document describes the process of creating a magazine front cover in Photoshop. The creator used background and character images from Dragon Ball Z, arranging Goku in the center surrounded by dragon balls. They experimented with font styles and positioning of text elements like the masthead and cover line. For the final product, the creator plans to take their own photos instead of using online images, change the background, and modify text elements like the magazine and game titles.
The second page describes an experiment in InDesign to feature a double page image. The creator aimed to position character photos to span both pages but had difficulty with sizing and placement. For the final product, they will take photos of people performing a fusion pose and
Film title production process
Marian created a new Photoshop file and rotated it 90 degrees clockwise. They found a dark background image on Google and copied it into PowerPoint, changing the color to red using color modification tools. The image was enlarged, adjusted for brightness and softness in PowerPoint, then copied back into Photoshop where text was added reading "Missing Jaime" in a font matching the background. Minor color adjustments were made to the background before finalizing the title image with and without capital letters.
Recommended
Final Prep
This document discusses the final preparations for a magazine cover, including choosing a font from DaFont for the masthead, editing the font for a music artist in Photoshop to be turquoise blue, selecting an image of the artist with a white background for the main cover photo to make text clear, and selecting the Prestige Elite Std font for the cover.
Photo selection for double page spread 1
The photographer reviewed several photos for a double page spread but found one photo too bright as the flash made the model too bright, another photo was okay but didn't show the whole model, and a third photo was too dark.
How effective is the combination of your main product and your ancillary texts?
The document discusses how the combination of a main film project and ancillary texts like a poster and review are effective. Key elements like color scheme, fonts, and images are used consistently across the projects to maintain continuity and effectively represent the horror genre. Red, black, and white are the main colors. Fonts are chosen for clarity and to highlight important information. Images portray the narrative and genre through composition and use of color. Background textures add depth and mystery.
FinallllHow effective is the combination of your main product and your ancill...
The document discusses how the combination of a main film project and ancillary texts like a poster and review are effective. Key elements like color scheme, fonts, and images are used consistently across the projects to maintain continuity and effectively represent the horror genre. Red, black, and white are the main colors. Fonts are chosen for clarity and to highlight important information. Images portray the narrative and genre through composition and use of color. Background textures add depth and mystery.
Image editing
This document summarizes the editing process for three images intended for a dubstep music magazine. For the first image, the artist was photographed against a plain background and used spot lighting to create warmth, then the background was removed and contrast was increased. The second image was also taken against a plain background with spot lighting, but was converted to black and white. The third image showed the artist looking down at equipment with spot lighting and was also converted to black and white. Overall, minimal editing techniques were used to maintain natural-looking images.
__
The document discusses photos the author considered and used for the cover and contents page of a magazine. The cover photo was edited in Photoshop to fix blemishes and enhance features like eye color. The contents photo was cropped to remove an unflattering shadow and later edited in Photoshop to match the magazine's color scheme. An unedited photo was also cropped for the contents page.
Magazine experiments
The document describes the process of creating a magazine front cover in Photoshop. The creator used background and character images from Dragon Ball Z, arranging Goku in the center surrounded by dragon balls. They experimented with font styles and positioning of text elements like the masthead and cover line. For the final product, the creator plans to take their own photos instead of using online images, change the background, and modify text elements like the magazine and game titles.
The second page describes an experiment in InDesign to feature a double page image. The creator aimed to position character photos to span both pages but had difficulty with sizing and placement. For the final product, they will take photos of people performing a fusion pose and
Film title production process
Marian created a new Photoshop file and rotated it 90 degrees clockwise. They found a dark background image on Google and copied it into PowerPoint, changing the color to red using color modification tools. The image was enlarged, adjusted for brightness and softness in PowerPoint, then copied back into Photoshop where text was added reading "Missing Jaime" in a font matching the background. Minor color adjustments were made to the background before finalizing the title image with and without capital letters.
Unit 9: Task 11 - Questionnaire
James Tourle reviewed several nature photos and made minor edits to some using Photoshop. For the wasp photo, he increased vibrance and curves to make it more colorful. The berries photo was made black and white except for the red berries. He adjusted the color of one flower to purple. Two photos were left unedited as they looked good already. A questionnaire asks for feedback on the photos, including ratings for each, comments on good and bad photos, and general comments.
Poster Design
The poster uses a black border framing technique inspired by the film "Alibi." Originally, the designer planned to split the two main characters to create a mirror effect, but it looked unnatural. Instead, the background is black and white while the foreground is oversaturated. Photos were taken of coins dropping fast to capture detail and of actors with standard lighting. In Photoshop, the actor photos were used to create streaks of paint leaking off the protagonist for a surreal effect. Layers were constructed including coins, money, and a psychedelic pattern. The title flips colors to reflect the saturated image above using a clean font for contrast.
Fourth recreation โ toothpaste photo
The document describes the process of recreating a photo to match the effects of an original photo. Several image editing techniques are used:
1) Cropping, brightness/contrast, hue/saturation, and color balance are used to match the darker tones, redness, and brown/yellow tones of the original photo.
2) Curves, photo filter, and clone stamp tools are used to replicate specific elements like darker facial features, a sepia tone, and background curtains/draws.
3) Finally, adding noise gives a speckled, blurred effect to further match the look of the original photo taken on older camera equipment.
Gcse photography
Kelsey Smith took photos for a photography class and provided feedback on each photo. [1] The backgrounds were often distracting colors instead of a uniform color. [2] Some photos were not bright enough or had objects in the frame that drew attention away from the main subject. [3] Focus was an issue in a few photos and could be improved in the next shoot.
Printscreens
The document describes the process of designing a CD cover in Photoshop. It involves desaturating and applying a sepia tone to the background photo. It then applies Gaussian blur and overlay effects to soften the background and make the artist stand out. Next, it describes cutting out the image of the artist and smoothing the edges before placing it on the background. Finally, brush strokes are added for decoration and layer styles are used to customize the text.
Magazine Development
The document describes the process of developing a magazine cover over three drafts in Photoshop. It outlines the conventions used in the initial sketch based on real magazines. The second draft made alterations to the color scheme, plug, positioning of elements, and base image. The final draft further refined these elements, changing the background to black and orange stripes, reverting the color scheme, adjusting element positioning, and editing the base image contrast.
First shoot commentary
The first location filmed was an art studio that was rearranged to look like an office. Props like a computer and office supplies were used, and lighting was set up with display lights and an LED screen light. The second location was at Sharpness Docks by the river, where a long tracking shot was done with a flycam stabilizer. Audio issues arose from picking up distant industrial drilling. The final shots were in an empty car park, with handheld shots inside the car and a low camera angle on the floor to quickly film the scene as daylight ended.
draft #1 - step by step
The document describes the process of designing a magazine cover in Photoshop. Key steps include:
1. Selecting an image for the cover and removing the background using selection and eraser tools.
2. Editing the cover image by changing colors and fixing hair to make it look more professional.
3. Realizing the chosen fonts did not work and selecting new fonts from an online library for elements like the masthead and headlines.
4. Adding elements like a barcode, issue details, and pricing information to complete the design.
Film title design process
1) The document describes creating different versions of a film title called "Missing Jaime" using Photoshop and PowerPoint. It explores adjusting colors, adding text, and animating letters.
2) One idea involves splitting the title letters across layers in Photoshop and arranging them horizontally on a black background. The letters are then animated to move and fade out.
3) A second idea reuses the background from the first idea. It animates the letters on top of this background, fading it to black at the end for a darker effect.
Obsession Test Poster
The document describes the process of creating a movie poster mockup. It discusses choosing fonts, finding online images, conducting a photoshoot with adjustments to lighting and using a hat, cropping and editing the photos, adding text elements, and blending the image into the background to create a sense of the character hiding in darkness. The goal was to experiment with techniques that could be applied to the final poster design.
57review
This document summarizes Liam Belch's photography project exploring architectural and urban landscapes in Salford Quays. It includes photos from the shoot along with details on camera settings and editing techniques. Liam selected several final images, one featuring vintage effects to contrast modern architecture. Another focused on metallic contrasts. The document also outlines a portrait shoot for a magazine, including selected front cover, double page, and contents photos. Details on compositing and color/toning edits are provided. Areas for improvement in composition and clarity are noted.
Opening titles (1)
The document describes the process of creating a production logo for a thriller movie. They used Photoshop to combine elements from various sources, including titling selected from the 'da font' website. Layers for the titling and a splattered paint image were made separately in Photoshop and then combined. Initially the splattered paint was blue but was changed to red to better suit the thriller genre.
Opening titles
The document describes the process of creating a production logo for a thriller movie. They used Photoshop to combine elements from various sources, including titling selected from the 'da font' website. Layers for different elements like splattered paint and titling were made separately in Photoshop and then combined. The splattered paint background was initially blue but was changed to red to better suit the thriller genre.
Image manipulation
This document describes image editing done in Photoshop. The original photo was taken with professional lighting, making one side brighter. In Photoshop, the background was cut out and changed to black, strands of hair were removed, and brightness/contrast was adjusted to make the image less bright. The image was also cropped to fit the page while allowing room to adjust placement and frame the image with cover lines.
Task 1 work sheet 2 landscape
This photographer prefers landscapes of the countryside over cities. Their photos contain a significant amount of sky and focus on nature like trees, fields, and mountains. The photos were taken in various locations including Japan, France, Belgium, and England. They use wide-angle shots with the main subject framed in the center. Different techniques were needed for bright versus overcast conditions. The strengths are framed composition and simple style, while weaknesses include some gloomy skies that could benefit from lightening.
Ancillary tasks - magazine progress
The document summarizes the progress made on designing the cover of a magazine in Photoshop. It describes experimenting with different background images and colors, editing a masthead design to make it stand out against dark backgrounds, shaping elements of a featured image, and copying the title from a related movie poster to link the magazine content. The next steps will be adding a tagline, subheadings, and other typical magazine elements like barcodes and prices.
5. pre production
The document outlines pre-production details for a special effects image project, including style sheets discussing color choices for various effects (e.g., red for fire, blue for lightning). Schedules and contingency plans are also included, with the project spanning 8 days and involving creating effects like lightning, star fields, fire, and dispersion splatter. Health and safety considerations are discussed like taking breaks to avoid injury.
Photo selection 1
The photographer found that several photo options were too bright, making it difficult to see the model's face clearly. While one image was okay, it was still a little too bright. Another image was way too bright to use for the shoot.
Production poster
The document describes the process of creating a movie poster. The creator used a placeholder image of their sister to develop ideas. They took a photo shoot with costumes and props in their home. The main image was edited to be black and white then copied and overlaid with different colors to resemble a "glitch image" and represent the mental state of the main character. Text was added including the movie title designed to look like messy handwriting, actresses' names, and a release date. The finished poster was intended to draw in the target audience and play with viewers' minds through the mixed colors and layered images.
How Our Logo Was Created
Our logo was created by first drawing a bare tree in Adobe Illustrator and transferring it to Photoshop on a burlap background. We then added a circular pattern of three different shades of green dots and placed them on the tree, and adjusted the brightness and contrast to make the image more eye-catching.
Final Film Magazine Feature
The document outlines the process taken to create a magazine cover and film poster from photographs. It describes how multiple images were merged and backgrounds were added. Effects like hue and saturation adjustments were made to create a twilight look. Elements from researched magazines and films posters, like bar codes and ratings, were included to look authentic. The tagline was changed to better link to the chosen poster image.
Evaluation Part 1
The document provides an evaluation of a media product (film trailer) and ancillary texts (film poster and magazine cover). It analyzes how the trailer used conventions like an "enigma code" and pacing. It also evaluates how effectively the trailer and ancillary texts worked together to convey an eerie, horror theme targeting young adults. Audience feedback noted the trailer's soundtrack could have been more fluid and the number of text slides could have been reduced to speed up the pace. The document demonstrates learning around improving sound editing and balancing text/pace in future trailers.
More Related Content
What's hot
Unit 9: Task 11 - Questionnaire
James Tourle reviewed several nature photos and made minor edits to some using Photoshop. For the wasp photo, he increased vibrance and curves to make it more colorful. The berries photo was made black and white except for the red berries. He adjusted the color of one flower to purple. Two photos were left unedited as they looked good already. A questionnaire asks for feedback on the photos, including ratings for each, comments on good and bad photos, and general comments.
Poster Design
The poster uses a black border framing technique inspired by the film "Alibi." Originally, the designer planned to split the two main characters to create a mirror effect, but it looked unnatural. Instead, the background is black and white while the foreground is oversaturated. Photos were taken of coins dropping fast to capture detail and of actors with standard lighting. In Photoshop, the actor photos were used to create streaks of paint leaking off the protagonist for a surreal effect. Layers were constructed including coins, money, and a psychedelic pattern. The title flips colors to reflect the saturated image above using a clean font for contrast.
Fourth recreation โ toothpaste photo
The document describes the process of recreating a photo to match the effects of an original photo. Several image editing techniques are used:
1) Cropping, brightness/contrast, hue/saturation, and color balance are used to match the darker tones, redness, and brown/yellow tones of the original photo.
2) Curves, photo filter, and clone stamp tools are used to replicate specific elements like darker facial features, a sepia tone, and background curtains/draws.
3) Finally, adding noise gives a speckled, blurred effect to further match the look of the original photo taken on older camera equipment.
Gcse photography
Kelsey Smith took photos for a photography class and provided feedback on each photo. [1] The backgrounds were often distracting colors instead of a uniform color. [2] Some photos were not bright enough or had objects in the frame that drew attention away from the main subject. [3] Focus was an issue in a few photos and could be improved in the next shoot.
Printscreens
The document describes the process of designing a CD cover in Photoshop. It involves desaturating and applying a sepia tone to the background photo. It then applies Gaussian blur and overlay effects to soften the background and make the artist stand out. Next, it describes cutting out the image of the artist and smoothing the edges before placing it on the background. Finally, brush strokes are added for decoration and layer styles are used to customize the text.
Magazine Development
The document describes the process of developing a magazine cover over three drafts in Photoshop. It outlines the conventions used in the initial sketch based on real magazines. The second draft made alterations to the color scheme, plug, positioning of elements, and base image. The final draft further refined these elements, changing the background to black and orange stripes, reverting the color scheme, adjusting element positioning, and editing the base image contrast.
First shoot commentary
The first location filmed was an art studio that was rearranged to look like an office. Props like a computer and office supplies were used, and lighting was set up with display lights and an LED screen light. The second location was at Sharpness Docks by the river, where a long tracking shot was done with a flycam stabilizer. Audio issues arose from picking up distant industrial drilling. The final shots were in an empty car park, with handheld shots inside the car and a low camera angle on the floor to quickly film the scene as daylight ended.
draft #1 - step by step
The document describes the process of designing a magazine cover in Photoshop. Key steps include:
1. Selecting an image for the cover and removing the background using selection and eraser tools.
2. Editing the cover image by changing colors and fixing hair to make it look more professional.
3. Realizing the chosen fonts did not work and selecting new fonts from an online library for elements like the masthead and headlines.
4. Adding elements like a barcode, issue details, and pricing information to complete the design.
Film title design process
1) The document describes creating different versions of a film title called "Missing Jaime" using Photoshop and PowerPoint. It explores adjusting colors, adding text, and animating letters.
2) One idea involves splitting the title letters across layers in Photoshop and arranging them horizontally on a black background. The letters are then animated to move and fade out.
3) A second idea reuses the background from the first idea. It animates the letters on top of this background, fading it to black at the end for a darker effect.
Obsession Test Poster
The document describes the process of creating a movie poster mockup. It discusses choosing fonts, finding online images, conducting a photoshoot with adjustments to lighting and using a hat, cropping and editing the photos, adding text elements, and blending the image into the background to create a sense of the character hiding in darkness. The goal was to experiment with techniques that could be applied to the final poster design.
57review
This document summarizes Liam Belch's photography project exploring architectural and urban landscapes in Salford Quays. It includes photos from the shoot along with details on camera settings and editing techniques. Liam selected several final images, one featuring vintage effects to contrast modern architecture. Another focused on metallic contrasts. The document also outlines a portrait shoot for a magazine, including selected front cover, double page, and contents photos. Details on compositing and color/toning edits are provided. Areas for improvement in composition and clarity are noted.
Opening titles (1)
The document describes the process of creating a production logo for a thriller movie. They used Photoshop to combine elements from various sources, including titling selected from the 'da font' website. Layers for the titling and a splattered paint image were made separately in Photoshop and then combined. Initially the splattered paint was blue but was changed to red to better suit the thriller genre.
Opening titles
The document describes the process of creating a production logo for a thriller movie. They used Photoshop to combine elements from various sources, including titling selected from the 'da font' website. Layers for different elements like splattered paint and titling were made separately in Photoshop and then combined. The splattered paint background was initially blue but was changed to red to better suit the thriller genre.
Image manipulation
This document describes image editing done in Photoshop. The original photo was taken with professional lighting, making one side brighter. In Photoshop, the background was cut out and changed to black, strands of hair were removed, and brightness/contrast was adjusted to make the image less bright. The image was also cropped to fit the page while allowing room to adjust placement and frame the image with cover lines.
Task 1 work sheet 2 landscape
This photographer prefers landscapes of the countryside over cities. Their photos contain a significant amount of sky and focus on nature like trees, fields, and mountains. The photos were taken in various locations including Japan, France, Belgium, and England. They use wide-angle shots with the main subject framed in the center. Different techniques were needed for bright versus overcast conditions. The strengths are framed composition and simple style, while weaknesses include some gloomy skies that could benefit from lightening.
Ancillary tasks - magazine progress
The document summarizes the progress made on designing the cover of a magazine in Photoshop. It describes experimenting with different background images and colors, editing a masthead design to make it stand out against dark backgrounds, shaping elements of a featured image, and copying the title from a related movie poster to link the magazine content. The next steps will be adding a tagline, subheadings, and other typical magazine elements like barcodes and prices.
5. pre production
The document outlines pre-production details for a special effects image project, including style sheets discussing color choices for various effects (e.g., red for fire, blue for lightning). Schedules and contingency plans are also included, with the project spanning 8 days and involving creating effects like lightning, star fields, fire, and dispersion splatter. Health and safety considerations are discussed like taking breaks to avoid injury.
Photo selection 1
The photographer found that several photo options were too bright, making it difficult to see the model's face clearly. While one image was okay, it was still a little too bright. Another image was way too bright to use for the shoot.
Production poster
The document describes the process of creating a movie poster. The creator used a placeholder image of their sister to develop ideas. They took a photo shoot with costumes and props in their home. The main image was edited to be black and white then copied and overlaid with different colors to resemble a "glitch image" and represent the mental state of the main character. Text was added including the movie title designed to look like messy handwriting, actresses' names, and a release date. The finished poster was intended to draw in the target audience and play with viewers' minds through the mixed colors and layered images.
How Our Logo Was Created
Our logo was created by first drawing a bare tree in Adobe Illustrator and transferring it to Photoshop on a burlap background. We then added a circular pattern of three different shades of green dots and placed them on the tree, and adjusted the brightness and contrast to make the image more eye-catching.
What's hot (20)
More from RMatthewsA2Media
Final Film Magazine Feature
The document outlines the process taken to create a magazine cover and film poster from photographs. It describes how multiple images were merged and backgrounds were added. Effects like hue and saturation adjustments were made to create a twilight look. Elements from researched magazines and films posters, like bar codes and ratings, were included to look authentic. The tagline was changed to better link to the chosen poster image.
Evaluation Part 1
The document provides an evaluation of a media product (film trailer) and ancillary texts (film poster and magazine cover). It analyzes how the trailer used conventions like an "enigma code" and pacing. It also evaluates how effectively the trailer and ancillary texts worked together to convey an eerie, horror theme targeting young adults. Audience feedback noted the trailer's soundtrack could have been more fluid and the number of text slides could have been reduced to speed up the pace. The document demonstrates learning around improving sound editing and balancing text/pace in future trailers.
Evaluation Part 3
During the research, planning, and evaluation stages of a project, the document discusses how new media technologies were used. This included analyzing horror movie trailers on YouTube, embedding videos and slideshows on a blog to display work and progress, and using social media like Facebook to get feedback from a wider audience. The various technologies allowed work to be easily shared and received input from others.
Evaluation Part 2
Part 2 explores my use of new media technologies throughout Construction, Research, Planning and Evaluation
Evaluation Part 1
The document provides an evaluation of a media product (film trailer) and ancillary texts (film poster and magazine cover) created by the author. The evaluation discusses how the trailer and ancillary texts used conventions of their genres and were effective at combining to promote the film. Key points included using mystery, suspense and ambiguity in the trailer and texts to engage audiences. Feedback from viewers noted the trailer's soundtrack could have been more fluid to be less distracting, and that the number of text slides in the trailer could have been reduced to speed up the pace.
Final Ancillary Projects
This document outlines the process of creating a magazine cover and film poster from photographs. It describes how the creator took multiple photos and adjusted them to merge into a final image for each piece. Backgrounds were altered and effects like twilight were added. Inspiration from research on real magazines and posters informed the layout, additional details, and design choices for both the magazine cover and film poster.
More from RMatthewsA2Media (7)
Recently uploaded
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(๐๐๐ ๐๐๐) (๐๐๐ฌ๐ฌ๐จ๐ง ๐)-๐๐ซ๐๐ฅ๐ข๐ฆ๐ฌ
๐๐ข๐ฌ๐๐ฎ๐ฌ๐ฌ ๐ญ๐ก๐ ๐๐๐ ๐๐ฎ๐ซ๐ซ๐ข๐๐ฎ๐ฅ๐ฎ๐ฆ ๐ข๐ง ๐ญ๐ก๐ ๐๐ก๐ข๐ฅ๐ข๐ฉ๐ฉ๐ข๐ง๐๐ฌ:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
๐๐ฑ๐ฉ๐ฅ๐๐ข๐ง ๐ญ๐ก๐ ๐๐๐ญ๐ฎ๐ซ๐ ๐๐ง๐ ๐๐๐จ๐ฉ๐ ๐จ๐ ๐๐ง ๐๐ง๐ญ๐ซ๐๐ฉ๐ซ๐๐ง๐๐ฎ๐ซ:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
A Independรชncia da Amรฉrica Espanhola LAPBOOK.pdf
Lapbook sobre independรชncia da Amรฉrica Espanhola.
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Benner "Expanding Pathways to Publishing Careers"
Benner "Expanding Pathways to Publishing Careers"National Information Standards Organization (NISO)
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.ย
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdย
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Lifelines of National Economy chapter for Class 10 STUDY MATERIAL PDF
Lifelines of National Economy chapter for Class 10 STUDY MATERIAL PDFVivekanand Anglo Vedic Academy
The chapter Lifelines of National Economy in Class 10 Geography focuses on the various modes of transportation and communication that play a vital role in the economic development of a country. These lifelines are crucial for the movement of goods, services, and people, thereby connecting different regions and promoting economic activities.ย
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the bodyโs response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Recently uploaded (20)
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
ย
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
ย
A Independรชncia da Amรฉrica Espanhola LAPBOOK.pdf
A Independรชncia da Amรฉrica Espanhola LAPBOOK.pdf
ย
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
ย
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
ย
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
ย
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH 8 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2023-2024 (Cร FI...
ย
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ย
Lifelines of National Economy chapter for Class 10 STUDY MATERIAL PDF
Lifelines of National Economy chapter for Class 10 STUDY MATERIAL PDF
ย
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
ย
B. Ed Syllabus for babasaheb ambedkar education university.pdf
B. Ed Syllabus for babasaheb ambedkar education university.pdf
ย
Alternative (but unused) Ancillary Ideas
- 1. A lt e r n a t iv e (but unus e d) Id e a s Samples 1
- 2. 2
- 3. I combined the previous photo, once colour corrected, with the head from this photo to create the next image. 3
- 4. 4
- 5. 5
- 6. This was a similar idea as the previous image, though intended to be used as the full image, rather than to take only parts. 6
- 7. 7
- 8. This final image was the only other fully finished alternative poster I created, similar to my final poster. This image was in fact captured as a frame from the moving image shots. After extracting this image from Premier Pro I adjusted the hue and saturation to recreate the sense of night time and enhance the shadows. 8