Aircraft Maintenance Manual is an important document for the Aircraft Maintenance Personnel. For the airworthiness of any flight, we do an inspection, servicing, repair, removal, installation, etc activities by following the approved documents which in manual or AMM. Here the presentation will disclose and familiarise with different manuals
This slide is prepared by me for the students studying in 1st Semester of Aircraft Maintenance Engineering. This is only the the introduction of Maintenance Practices involved in Aircraft Maintenance. Reference is taken from various aviation books and websites. Suggestions are welcome. Pls leave a like
PS- after downloading please don't change the name of author as you will be disregarding all the hard work done by me.
How to develop maintenance program in aviation industry with considering cost, operational aspect. Comparing MSG System, FMEA principal and commercial aspect. Airline maintenance program is ultimately important for sustainability of airline business
This slide is prepared by me for the students studying in 1st Semester of Aircraft Maintenance Engineering. This is only the the introduction of Maintenance Practices involved in Aircraft Maintenance. Reference is taken from various aviation books and websites. Suggestions are welcome. Pls leave a like
PS- after downloading please don't change the name of author as you will be disregarding all the hard work done by me.
How to develop maintenance program in aviation industry with considering cost, operational aspect. Comparing MSG System, FMEA principal and commercial aspect. Airline maintenance program is ultimately important for sustainability of airline business
This presentation is an examination of structural repair of aircraft. It details the goals, regulations and classification of repairs for different types of aircraft damage.
The paper that this presentation is based on was presented by Dr. Kishore Brahma of the AXISCADES Engineering Core Group at the International Conference & Exhibition on Fatigue, Durability & Fracture Mechanics (FatigueDurabilityIndia2015) in Bangalore from 28-30th May 2015.
This presentation is an examination of structural repair of aircraft. It details the goals, regulations and classification of repairs for different types of aircraft damage.
The paper that this presentation is based on was presented by Dr. Kishore Brahma of the AXISCADES Engineering Core Group at the International Conference & Exhibition on Fatigue, Durability & Fracture Mechanics (FatigueDurabilityIndia2015) in Bangalore from 28-30th May 2015.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Aircraft Maintenance Manuals for Engineer's by Engr. Malay Kanti Bala
1. Aircraft Maintenance
Manuals for Engineers
Prepared By:
Engr. Malay Kanti Bala
EASA Part-66 B1.1 Instructor
PGP in Aircraft Leasing and Financing
Masters in Sustainable Air Transport Management
MBA in Engineering Management
BSc in Aeronautical Engineering
EASA B1.1 Licensed Engineer
2. By The End of The Lesson Audience Will Be Able to:
֍ Introduce with different Aircraft Maintenance Manuals
֍ Explain about Different AMM
֍ Describe about Line and Base Maintenance
Learning Objectives
3. What is Aircraft Manual ?
Aircraft manual is a book or approved document which is used for
flight operation, inspection, servicing, troubleshooting, removal,
installation, rectifying, repairing and maintenance of the aircraft
structure, parts or components.
Examples:
- Wheel Removal/ Installation
-Wings Inspection
Approved by Manufacturer and NAA
Manufacturer: Boeing, Airbus, Embraer, Cessna etc.
CAA: DGCA-India, CAAB- Bangladesh, EASA-EU, FAA-USA.
4. According to uses we may divide as blow in:
֍ Line Maintenance - Ramp
֍ Base Maintenance – Hangar
֍ Workshop Use – Hangar
Where Used AMM?
5. This would typically include Pre-flight checks, daily checks (before first flight) fluids,
failure rectification as well as minor, scheduled maintenance tasks as follows.
According to EASA /CAAB Part 145, AMC 145.A.10, line maintenance should be
understood as
“any maintenance that is carried out before flight to ensure that the aircraft is fit for
the intended flight.” This may include:
֍ Trouble shooting and Defect rectification
֍ Component replacement, up to and including engines and propellers, with use of external test
equipment if required
֍ Scheduled maintenance and/or checks including visual inspections that will detect obvious
failures but do not require extensive in-depth inspection. It may also include internal structure,
systems and powerplant items which are visible through quick opening access panels/doors
֍ Minor repairs and modifications which do not require extensive disassembly and can be
accomplished by simple means
֍ EASA Part 145, AMC 145.A.10 also explains that “for temporary or occasional cases (ADs,
SBs) the Quality Manager may accept base maintenance tasks to be performed by a line
maintenance organization provided all requirements are fulfilled as defined by the competent
authority”. It is also noted that “Maintenance tasks falling outside these criteria are considered to
be Base Maintenance”.
Line Maintenance
6. Base maintenance may be referred to as heavy ( or depth) maintenance and
consists of tasks that are generally more in-depth and long-lasting than line
maintenance but are performed less frequently. An MRO (maintenance, repair and
overhaul) company will have to have large facilities and specialized equipment
and staff to undertake base maintenance, and many operators contract-out this
function. The different activities may include:
֍ C and D Checks (block checks see Maintenance Programe) which will check
for deterioration of the airframe, engines and systems, e.g. corrosion, fatigue
֍ Removal of defects – implementation of Service Bulletins (SB) and
Airworthiness Directives (AD), although this can also be done during Line
maintenance.
֍ Technology upgrade – fitting of Terrain Avoidance and Warning System
(TAWS), Airborne Collision Avoidance System (ACAS), GPS etc
֍ Cabin reconfiguration, painting etc.
Base Maintenance
8. Maintenance Activities that are defined by its
component’s manufacturer. Such maintenance need
to be performed upon set interval defined by
manufacturer
The intervals are based on:
֍ Aircraft Flying Hours
֍ Aircraft Landing Cycles
֍ Calendar time (since manufacture or installation)
Aircraft Schedule Maintenance
9. Such maintenance activities need to be performed
based on its occurrence (accident or incident) and
do not have any fixed schedule frequency.
Examples:
֍ Hard Landing –Wheel Assy R/I due to worn out
֍ Lightening Strick – During flight
֍ Bird Strike- Take off or Landing
Aircraft Unschedule Maintenance
10. TEM- Tools and Equipment Manuals
CML- Consumable Materials List
CDL- Configuration Deviation List
CMM- Component Maintenance Manual
EMM-Engine Maintenance Manual
OEM- Original Equipment Manufacturer
NDTM- Non-Destructive Testing Manual
Different Aircraft Manuals
AMM- Aircraft Maintenance Manual
MPD- Maintenance Planning Document
FIM- Fault Isolation Manual
MEL- Minimum Equipment List
IPC- Illustrated Parts Catalogue
SDM- Schematic Diagram Manual
EWDM- Electrical Wring Diagram Manual
11. It’s a formal document of manufacturer for accomplishing the job related to maintenance
including includes items such as lubrication system functional checks and servicing of the
airplane but usually excludes structural repairs and modifications. According to aircraft
type the manual instructions will be different. It’s the mother of manuals.
֍ In the AMM we may found the problems and solutions as per the ATA chapters.
֍ Chapter- Subsystems-Components
֍ AMM has two parts (Part I System Description and Part II Practices and Procedures )
AMM-Aircraft Maintenance Manual
12. ֍ Servicing
֍ Removal and Installation
֍ Deactivation and Reactivation
֍ Test and Adjustment
• Operational Test
• Functional Test
• System Test
• BITE Test
֍ Inspection/Check
• Detailed Inspection
• General Visual Inspection
• Special Detailed Inspection
֍ Cleaning and Painting
֍ Repairs
Aircraft Maintenance Manual Feature
13. ֍ Use to repair airplane faults
֍ Fault isolation process with fault report, fault codes or a fault
description
֍ The FIM will identify the correct maintenance action to solve the
fault.
֍ BY BITE (Built in Test Equipment) test get the fault code
֍ Fault code refer to FIM
FIM- Fault Isolation Manual
14. Its supplies descriptive information and specific
instructions to help in field repair of Airplane
structure.
Most airplane structures include a fuselage, wings,
an empennage, landing gear, and a powerplant
It’s not customized and Issued by Manufacturer
Given data for:
- Allowable damage evaluation
- Typical repairs
- Materials Identification
- Alignment check
- Fastener's installation etc.
SRM- Structure Repair Manual
15. The Maintenance planning documents (MPDs) are
provided by aircraft manufacturers to describe the
repetitive tasks that are required to maintain their
aircraft. Maintenance planning engineers use the
MPD information to develop operator maintenance
programs (OMPs) that are then submitted to the
relevant aviation authority for approval
MPD- Maintenance Planning Document
16. ֍IPC means the document which
provides the information needed to
identify and requisition all
replaceable assemblies,
subassemblies, components, and parts
used on the Aircraft.
֍ Made by OEM
֍ Used to find location, quantities
and Part Number
IPC- Illustrated Parts Catalog
17. ֍ A minimum equipment list (MEL) is a list which provides
for the operation of aircraft, subject to specified conditions,
with particular equipment inoperative (which is) prepared
by an operator in conformity with, or more restrictive than,
the MMEL established for the aircraft type. An operator may
not operate an aircraft which does not comply with the
approved MEL
֍ The aim of this list is to postpone the aircraft maintenance
and continue with the operations, avoiding delays and
cancellations, whenever possible and when the associated risk
of the inoperative equipment is under control.
֍ The MEL is a more restrictive document than MMEL
MEL-Minimum Equipment List
18. Wiring Diagram Manual (WDM) that provided airline maintenance teams with a precise
representation of an airplane’s wiring system. However, the process of locating the exact
wiring harness, junction, wire, or other electrical component takes time away from the
mechanic’s real job: fixing a problem so the airplane can return to service. Its represent
-Wire Size
Type of Terminal
Part Number and Serial Number
Type:
Block diagram, Pictorial diagram, Schematic Diagram
EWDM-Electrical Wiring Diagrams
19. Schematic diagrams of electrical, electronic, and hydraulic systems
on the aircraft as well as logic diagrams contains the detailed
information and identifies wiring harnesses, connectors, and
interfacing equipment.
SDM- Schematic Diagram
20. Involves configuration of the aircraft
Information on panels, fairings, and similar
variations in configuration that can be
nonstandard at dispatch as long is it does not
affect the safety of flight
CDL-Configuration Deviation List
21. A Component Maintenance Manual
(CMM) is a formal document that
details how to accomplish off-aircraft
maintenance tasks on an aircraft
component. The maintenance tasks
contained in the CMM include the
information required to check, repair,
adjust, and test units or assemblies, and
contain enough detail to return the
component to a serviceable condition.
CMM- Component Maintenance Manual
22. ֍ It’s a principal manual of the Aircraft.
֍ 40% maintenance cost goes to Engine.
֍ Provided by OEM then the Aircraft
Manufacturer company (Boeing or Airbus)
added in the AMM.
֍ Engine in the Aeroplane maintenance done
my AMM
֍ Engine in workshop use EMM for repair, R/I
and Overhauling etc.
EMM-Engine Maintenance Manual
23. The approved manual given by the component or
equipment manufacturer know as Original
Equipment Manufacturer.
Example: Engine Maintenance Manual its
prepared by the engine manufacturer (Safran,
CFM)
OEM- Original Equipment Manufacturer
24. Non-Destructive Testing manual is the approved
document for testing the parts, equipment or component
without broken it.
֍ Visual NDT (VT)
֍ Ultrasonic NDT (UT)
֍ Radiography NDT (RT)
֍ Eddy Current NDT (ET)
֍ Magnetic Particle NDT (MT)
֍ Acoustic Emission NDT (AE)
֍ Dye Penetrant NDT (PT)
NDTM- Non-Destructive Testing Manual