Jerazen Mondejar is a Filipino aircraft maintenance engineer with over 20 years of experience performing line maintenance on various wide-body and narrow-body aircraft. He is currently seeking a responsible position where he can utilize his experience inspecting aircraft components for defects, performing repairs and maintenance, and ensuring compliance with regulations. Some of his qualifications include extensive experience maintaining Boeing, Airbus, McDonnell Douglas, Lockheed, and C-130 aircraft.

1. JERAZEN O. MONDEJAR
Singapore Airlines Engineering Co./
Aerospec Supplies Pte, Ltd, 81 UbiAvenue 4#09-25 UBOne
Singapore 408830
Email – jerazenm@gmail.com
Mobile number – +6582509916
OBJECTIVE
A responsible position where diversified, results oriented, hard work and
experience in aircraft maintains can be utilized productively.
DESCRIPTIONS FOR LINE MAINTENANCE
Inspect aircrafts for any component defects, break-outs,
fluidleakages,etc.Assemble and disassemble various components
ofaircraftduring repairs and maintenance.
Perform maintenance, disassembly, rework, repair, replacement, re-
assembly or adjustment of various aircraft components.Test aircraftoperations
to malfunctions. Adjust, align and aircrafts using hand tools, gauges, etc.
Adjust, align and calibrate aircraft using hand tools, gauges, etc. perform
oil changes, battery service, hydraulic system service and other aircraft services
tasks. Ensure compliance with FAA and company standards. Keep work area
clean and safe. Perform routine maintenance and cleaning of aircraft interiors
and exteriors. Inspect aircraft engine for cracks and leaks. Inform component
repairs to manager and chief mechanic. Resolve complex technical problems
and troubleshoot unusual repairs. Perform compliance with environmental,
health and safety regulations. Operate support equipment that is used in
removal and installations of major aircraft components. Perform aircraft push
back and aircraft headset for aircraft departure, Use, maintain and store
company-provided tools and equipment in safe and manner.

2. QUALIFICATIONS
Extensive experience in all aspect of maintains, repair, inspection, trouble
shooting and servicing of B-737-200/300/800, B -767, B777-200/300, -747-200-300 -
400, A-319, A320, A321, A330-200-300, A340-200-500-600, A380, M D-90, M D-11, C –
130E/H, C -130-L-100-20 aircraft and installed components.
WORK HISTORY
 24th
Feb. 2016 up to present Singapore airlines engineering company/Aerospec
Supplies Pte, Ltd, 81 Ubi Avenue 4#09-25 UB One, Singapore 408830
 27th
July 2011 up to 24th
May 2013 Singapore Airlines/Singapore JAMCO Private
Limited, No. 8 Loyang Lane, Singapore 508915
 06th
April 2011 up to July 20, 2011 SASCO Base Maintenance ST Aerospace
Services Co Pte. Ltd. 8 Changi North Way Singapore 499611
 28th
March 2007 to 31st
March 2011 Bahrain Airport Services Line Maintenance
Engineering P.O. Box 22285 Kingdom of Bahrain.
 03rd
July 2006 up to 27th
Dec 2006
SASCO ST Engineering (Base Maintenance)
Under AJI International Pte. Ltd.
750C Chai Chee Road # 02—2 Techno Park
Chai Chee Singapore 469003
 08th
Dec 2004 to 30th
June 2006
Singapore Airlines, Thru Singapore JAMCO Private Limited
Under A.J.I International Pte. Ltd.
Aviation Jobs International Pte, Ltd.
750C Chai Chee Road # 02—2 Techno Park
Chai Chee Singapore 469003
 27th
Dec 2003 to 05th
Nov. 2004
ST Aeropace Engineering Base Maintenance
Aviation Jobs International Pte, Ltd.

3. 750C Chai Chee Road # 02—2 Techno Park
Chai Chee Singapore 469003
 15th
May 2003 to 24th
July 2003
Aircraft Generation Flight (AGF)
Difa O&M Co. Ltd. C-130/ Casa Program,
Prince Sultan Airbase, Al-Kharj, Riyadh KSA.
 16th
May 1996 to 03rd
March 2002
Lockheed martin Middle – East Sv. C-130 (J) Program,
Prince Abdullah Airbase, Jeddah KSA.
DUTIES AND RESPONSIBILITIES ON AIRCRAFT
B737-200/300/800/B-767/757, B-777-200-300, B747-200/300/400, A-319,
A320, A321, A330-200, A330-300, A340-500, A380, M D-90,MD-11, C-130E/H, C-
130-L-100-20
 Perform line maintenance check of aircraft such as transit check, service
check, A check, B check. Servicing, aircraft towing, marshalling, refueling
and defuelling, service bulletin in accordance with maintenance manual
removal and installation of parts and components of the aircraft.
 Perform Aircraft maintenance C&D check, installation of parts and
components of aircraft, repair, troubleshooting, rigging, assembly and
disassembly of engine parts of JT8D/T -56 & CFM-56-300.
 Perform removal/installation of Galley Module on heavy maintenance
check. Galley defects check, rectification and modification.
 Perform Composite fiver glass – repair panel, cowling, blankets removal,
and hot bonding/sanding of all composite materials of aircraft with the
quality standard set by the manufacturer specification.
 Perform minor sheet metal repair and modification of galleys, lavatories
and its accessories, kickboards and check strips, overhead stowage bins,
side walls and ceiling panels, and other interior furnishing within the
specified ground time to maintain service ability and presentable
appearance of the aircraft.

4.  Removal/installation of Lavatory Module during heavy maintenance checks
and perform lavatory parts function test. Defect inspection,
removal/installation of lavatory including leak checks on waste and water
line.
 Perform checks, rectification, and removal/installation of aircraft stowage
bin module. Removal/installation of ceiling panel, DADO panels, side wall
panels including replacement or cleaning of window shades, outer and
inner window panels.
 Removal/installation of aircraft door trim panel and escape slide /raft.
 Removal/installation of aircraft interior dividers, crew bunks and closets
during heavy maintenance checks. Checks rectification and modification of
parts thereof.
 Removal/installation of aircraft floorboards including application of anti-
corrosion chemicals underneath metal frames and sealant application of
wet parts areas.
 Perform checks, removal/installation of aircraft fabrics such as carpets,
curtain, galley mats, passenger and attendant seat covers.
 Check, removal and replacement of emergency loose equipment. Check
for its serviceability, physical appearances, pressures (pressurized bottles)
seals and due dates.
 All performed task are directed by the service engineer and senior
technician and in accordance with the company policies, standards and
procedures, manufacture's specifications and standards, government
regulations and contract specifications as applicable on the aircraft and
related accessories for compliance.
 Perform inspection, functional checks, preventive maintenance on aircraft
and installed equipment. Performs Pre-flight, Post-flight, thru flight
calendar isochronal, and periodic/phase inspection on aircraft including
structures, landing gears, engines instruments, cockpits, cabin flight,
surfaces and controls. Inspect and performs functional checks of aircraft
system such as hydraulic, electrical, pressurization, lubrication, anti-icing
vacuum, induction and exhaust and installed equipment such as external

5. tanks, tow reels, hoist and auxiliary power units. Inspect aircraft
components for cleanliness, alignment and proper clearance and
operation, evidence of wear cracks and looseness in accordance with
technical orders. Launches and recovers aircraft.
 Repairs, maintains and service aircraft and installed equipment. Removes
install and adjust aircraft and systems components such as flight controls,
shock struts, wheels, brakes, tires, cowling, enclosure, hose and tubing.
 Determines and accomplishes maintenance actions required to correct
malfunctions indicated in aircraft forms completion of maintenance, clean
aircraft engines. Identifies corrosion and applies protective measures,
troubleshoots malfunction pertaining to aircraft structures, landing gear,
control surface, induction, exhaust, and ventilation and heating systems.
Serviced oil-de-icing, fuel, hydraulic and oxygen (gaseous and liquid)
system. Obtain engine oil samples for analysis. Operates and maintains
non-powered ground equipment. Performs assigned maintenance on
aircraft installed auxiliary power unit. Operates and maintains non-
powered ground equipment. Performs assigned maintenance I repair and
installation of aircraft wheel and tire assy. Interprets diagrams and
applicable publication. Completes maintenance data forms.
 Supervised aircraft maintenance personnel. Assigned work and reviews
completed works to ensure compliance with the applicable technical
publications and local procedures. Instructed subordinates in maintenance
of aircraft and installed equipments. Ensure compliance with the
appropriate procedures prescribed by siaec/ aerospec supplies pte, ltd.
management's directives conducts on the job training.
EDUCATION
AIRCRAFT MAINTENANCE ENGINEERING
Philippine Air force College of Aeronautics
Mactan Air Base, Lapu-Lapu City, Philippines
LICENSE, A.G.E EQUIPMENT:
 Power On (aircraft)
 Hobart Power
 Manlift 3x17/23

6.  Forkclift 5K, 10K, 20K
 Clark Tugs (Aircraft Tow Trucks)
 Clark Overhead Crane
 Pick-up Trucks F/L QVA
 NF-2 Light All
 Electric Cart
 High & Low Compressor
PERSONAL DATA
Nationality : Filipino
Civil Status : Married
Age : 46 yrs. old
Birth Date : 24th
September 1969
Birth Place : Bulua, Cagayan De Oro City Philippines
REFERENCES
Anthony Lim
Contract manager
Aerospec supplies pte ltd
Olivia Yeoh
General Manager
Aviation Jobs International Pte. Ltd.
Zechariah Dinest Nair
Contract Manager
Aviation Jobs International Pte. Ltd.
Benjamin M. Dulfo Jr.
Staff #296097
HAECO Line Cargo

7. JERAZEN O. MONDEJAR
Applicant