Accelerometer or gravity sensor based accident sms notification using gsm module.pptx
•Download as PPTX, PDF•
0 likes•10 views
Design & Implementation of accelerometer gravity sensor based Based Vehicle Accident sms Notification System using GSM module and Arduino. For Code , Diagram or any kind of Project help please contact Whatsapp : +8801739575990 Email : bdeeeproject@gmail.com Facebook : www.facebook.com/EEEProjectBangladesh Youtube : www.youtube.com/@eeeprojectbd9888
Report
Share
Report
Share
Recommended
Tracking and Recovery of the Vehicle using GPS and GSM
This document describes a vehicle tracking and recovery system that uses GPS and GSM technologies. The system includes sensors that detect accidents and send alerts. It uses a microcontroller connected to a GPS module and GSM modem to track the vehicle's location and send emergency SMS messages with the coordinates to emergency contacts when an accident is detected. The system aims to reduce accident fatalities by quickly notifying emergency services of accidents and the vehicle's location to facilitate rescue. It provides real-time vehicle tracking and recovery capabilities to increase road safety.
IRJET- Automatic Vehicle Accident Detection and Rescue System
This document describes an automatic vehicle accident detection and rescue system that uses IoT technology. The system uses impact and ultrasonic sensors to detect if an accident occurs. If an accident is detected, the Arduino microcontroller sends the vehicle's location data from the GPS module and alerts the vehicle owner, nearest hospital, and police station through text messages sent via a GSM modem. The goal is to detect accidents quickly and send location information to emergency responders to reduce loss of life. The system aims to automatically detect accidents and communicate location information faster than existing systems to improve emergency response times.
3. UJRRA_23_26(B).pdf
This document summarizes a research paper that proposes an accident detection system using an accelerometer, vibration sensor, GPS module, and GSM module. When an accident is detected by abnormal acceleration readings from the accelerometer and vibration sensor, the GPS module provides location coordinates and the GSM module sends an alert message with the location to emergency services. This system aims to quickly detect road accidents and alert authorities to the location to improve emergency response times and save lives, especially in remote areas where accidents may otherwise go unreported.
ARM Based Vehicle Theft Control, Positioning and Collision Detection System
This document describes an ARM-based vehicle theft control, positioning, and collision detection system. The system uses GPS and GSM modules connected to an ARM controller to provide theft prevention, accident detection, and live vehicle tracking. For theft prevention, a fingerprint module is used for authentication. In the event of an accident, an accelerometer sensor detects impacts and alerts emergency contacts if the accident is severe by sending SMS messages with the vehicle's GPS coordinates. If the vehicle is stolen, its live location can be tracked using the GPS module. The system aims to provide security against theft, notify emergency services faster in the event of an accident, and allow retrieval of a stolen vehicle.
ARM Based Vehicle Theft Control, Positioning and Collision Detection System
This document describes an ARM-based vehicle theft control, positioning, and collision detection system. The system uses accelerometer, GPS, GSM, and fingerprint sensors with an ARM controller to detect vehicle accidents and theft. In the event of an accident, the system detects abnormal vehicle movement with the accelerometer and notifies emergency contacts by sending SMS messages with the vehicle's GPS coordinates. For theft prevention, the system requires fingerprint authentication and sounds an alarm if unauthorized fingerprints are detected, also sending SMS alerts. If the vehicle is stolen, owners can track its live location using the GPS module. The system aims to provide quick emergency assistance in accidents and increase vehicle security against theft.
Ijsrdv8 i10772
“Helpdroid” we inspire by movie-Prema the
project we provide the accident detection in any place. We
provide the help to injuries peoples. When the car or bike
crash together then the GPS and GMS with the crash sensor
send the digital signal and send the message and call to near
police station, ambulance and there related persons.
car accident-up EEE.pptx
This document outlines a project to create a vehicle accident detection device using a GPS receiver, gyroscope sensor, and GSM modem. The device would detect accidents by sensing abrupt vibrations with the gyroscope. It would then use the GPS receiver to determine the accident location and send this location via text message to predefined phone numbers using the GSM modem. The document describes the circuit components, working procedure, block diagram, circuit diagram, advantages and disadvantages, cost analysis, and future scope of the project.
Wireless Reporting System for Accident Detection at Higher Speeds
Speed is one of the basic reasons for vehicle accident. Many lives could have been saved if emergency service
could get accident information and reach in time. Nowadays, GPS has become an integral part of a vehicle
system. This paper proposes to utilize the capability of a GPS receiver to monitor speed of a vehicle and detect
accident basing on monitored speed and send accident location to an Alert Service Center. The GPS will
monitor speed of a vehicle and compare with the previous speed in every second through a Microcontroller
Unit. Whenever the speed will be below the specified speed, it will assume that an accident has occurred. The
system will then send the accident location acquired from the GPS along with the time and the speed by utilizing
the GSM network. This will help to reach the rescue service in time and save the valuable human life.
Recommended
Tracking and Recovery of the Vehicle using GPS and GSM
This document describes a vehicle tracking and recovery system that uses GPS and GSM technologies. The system includes sensors that detect accidents and send alerts. It uses a microcontroller connected to a GPS module and GSM modem to track the vehicle's location and send emergency SMS messages with the coordinates to emergency contacts when an accident is detected. The system aims to reduce accident fatalities by quickly notifying emergency services of accidents and the vehicle's location to facilitate rescue. It provides real-time vehicle tracking and recovery capabilities to increase road safety.
IRJET- Automatic Vehicle Accident Detection and Rescue System
This document describes an automatic vehicle accident detection and rescue system that uses IoT technology. The system uses impact and ultrasonic sensors to detect if an accident occurs. If an accident is detected, the Arduino microcontroller sends the vehicle's location data from the GPS module and alerts the vehicle owner, nearest hospital, and police station through text messages sent via a GSM modem. The goal is to detect accidents quickly and send location information to emergency responders to reduce loss of life. The system aims to automatically detect accidents and communicate location information faster than existing systems to improve emergency response times.
3. UJRRA_23_26(B).pdf
This document summarizes a research paper that proposes an accident detection system using an accelerometer, vibration sensor, GPS module, and GSM module. When an accident is detected by abnormal acceleration readings from the accelerometer and vibration sensor, the GPS module provides location coordinates and the GSM module sends an alert message with the location to emergency services. This system aims to quickly detect road accidents and alert authorities to the location to improve emergency response times and save lives, especially in remote areas where accidents may otherwise go unreported.
ARM Based Vehicle Theft Control, Positioning and Collision Detection System
This document describes an ARM-based vehicle theft control, positioning, and collision detection system. The system uses GPS and GSM modules connected to an ARM controller to provide theft prevention, accident detection, and live vehicle tracking. For theft prevention, a fingerprint module is used for authentication. In the event of an accident, an accelerometer sensor detects impacts and alerts emergency contacts if the accident is severe by sending SMS messages with the vehicle's GPS coordinates. If the vehicle is stolen, its live location can be tracked using the GPS module. The system aims to provide security against theft, notify emergency services faster in the event of an accident, and allow retrieval of a stolen vehicle.
ARM Based Vehicle Theft Control, Positioning and Collision Detection System
This document describes an ARM-based vehicle theft control, positioning, and collision detection system. The system uses accelerometer, GPS, GSM, and fingerprint sensors with an ARM controller to detect vehicle accidents and theft. In the event of an accident, the system detects abnormal vehicle movement with the accelerometer and notifies emergency contacts by sending SMS messages with the vehicle's GPS coordinates. For theft prevention, the system requires fingerprint authentication and sounds an alarm if unauthorized fingerprints are detected, also sending SMS alerts. If the vehicle is stolen, owners can track its live location using the GPS module. The system aims to provide quick emergency assistance in accidents and increase vehicle security against theft.
Ijsrdv8 i10772
“Helpdroid” we inspire by movie-Prema the
project we provide the accident detection in any place. We
provide the help to injuries peoples. When the car or bike
crash together then the GPS and GMS with the crash sensor
send the digital signal and send the message and call to near
police station, ambulance and there related persons.
car accident-up EEE.pptx
This document outlines a project to create a vehicle accident detection device using a GPS receiver, gyroscope sensor, and GSM modem. The device would detect accidents by sensing abrupt vibrations with the gyroscope. It would then use the GPS receiver to determine the accident location and send this location via text message to predefined phone numbers using the GSM modem. The document describes the circuit components, working procedure, block diagram, circuit diagram, advantages and disadvantages, cost analysis, and future scope of the project.
Wireless Reporting System for Accident Detection at Higher Speeds
Speed is one of the basic reasons for vehicle accident. Many lives could have been saved if emergency service
could get accident information and reach in time. Nowadays, GPS has become an integral part of a vehicle
system. This paper proposes to utilize the capability of a GPS receiver to monitor speed of a vehicle and detect
accident basing on monitored speed and send accident location to an Alert Service Center. The GPS will
monitor speed of a vehicle and compare with the previous speed in every second through a Microcontroller
Unit. Whenever the speed will be below the specified speed, it will assume that an accident has occurred. The
system will then send the accident location acquired from the GPS along with the time and the speed by utilizing
the GSM network. This will help to reach the rescue service in time and save the valuable human life.
Review on technique used to detect and report the cause of accident.
This document reviews techniques used to detect and report the cause of road accidents. It discusses several methods including using GPS and GSM to send location data to emergency services, detecting accidents through sensors that measure vehicle tilt, vibration and orientation, using ultrasonic sensors to monitor vehicle distances, and simulating traffic accidents using the SUMO program. The aim is to analyze existing approaches to predict, detect and prevent deaths from road accidents in order to lower fatality rates and ensure emergency services can respond quickly.
50120130405010
The document describes a proposed vehicle black box system that uses an accelerometer, GPS, and GSM components for driver assistance and accident alert capabilities. The system is intended to automatically contact emergency services if an accident is detected by sending a short message with the vehicle's location. This would help reduce response times in remote areas. Additionally, the system could allow vehicle owners to remotely track or be alerted to theft attempts by calling or messaging the owner's phone. The proposed system aims to address issues with current vehicle security and response limitations after an accident occurs.
50120130405010
This document summarizes a research paper that proposes a vehicle black box system using sensors for driver assistance and accident alerts. The system would use an accelerometer, GPS, and GSM module to detect if an accident occurs. If an accident is detected, the system would send SMS messages with the vehicle's location to emergency contacts and services after a 1 minute delay. This would help provide faster emergency response. The document discusses the design of the system and algorithms for location tracking and distance calculation that would be used. It also reviews other related literature on using sensor data for accident analysis and surveillance.
Vehicle accident detection system (VAD)
The main objective of our project is to provide an optimum solution to the traffic hazards and the road accidents. According to this project when a vehicle meets with an accident, immediately vibration sensor will detect the signal and sends it to ARM controller. Microcontroller sends the alert message through the GSM MODEM including the location to police control room or a rescue team. So the police can immediately trace the location through the GPS MODEM after receiving the information.
Vehicle Theft Control and Accident Location Intimation Through SMS
Human life is more valuable than anything else, timely help is more important than lending a helping hand. This project is one among those which is designed in a way to save human lives in a timely manner. In modern day vehicles, vehicle anti-theft system is of prime importance and traffic accidents are one of the leading causes of fatalities. An important indicator of survival rates after an accident is the time between the accident and when emergency medical personnel are dispatched to the accident location. By eliminating the time between when an accident occurs and when the first responders are dispatched to the scene decreases mortality rates, we can save lives. There are two main modules discussed in the project. In this project the first module is password based security system to access the vehicle. And the second one is accident location intimation through SMS by using GSM module.
ALPHA-ACCIDENT LOCATION PATIENT HEALTH ASSISTENCE
This document describes a proposed accident detection and alert system that uses various sensors and communication modules. The system uses an Arduino microcontroller that interfaces with an impact sensor, GPS module, and GSM module. When an accident is detected by the impact sensor, the Arduino reads the vehicle's location from the GPS module and sends this information via text message to emergency contacts using the GSM module. The goal is to detect vehicle accidents and quickly alert emergency services to the accident location to save lives.
IRJET- Car Obstacle Detection and Pollution Level Tracing using Node MCU
This document describes a system that uses sensors installed in vehicles to detect obstacles and monitor pollution levels. The system uses an ultrasonic sensor to detect objects in front of the vehicle to avoid accidents. It also uses gas sensors to detect CO2 emitted from the vehicle. When obstacles are detected, the system automatically controls the vehicle speed to avoid collisions. The pollution levels are also monitored and notifications are sent if levels exceed standards. The system aims to reduce road accidents and monitor vehicle emissions using sensors and microcontrollers connected to the Internet of Things.
final review ppt.ppt
This document presents a project on developing a smart vehicle accident detection and rescue system using IoT. The system aims to automatically detect vehicle accidents and alert nearby people, hospitals, and police. It also sends location details to help with rescue efforts. The proposed system uses sensors to detect accidents and an IoT module to communicate accident details via a cloud network. If the accident is minor, drivers can press a reset button to avoid alerts. Otherwise, location and vehicle data is sent for emergency response. The system was tested on vehicles and aims to reduce accident fatalities by expediting rescue times.
A Major Project Report On Quot VEHICLE TRACKING SYSTEM USING GPS AND GSM Q...
This document is a project report on a vehicle tracking system using GPS and GSM. It was submitted by four students to Rajiv Gandhi Prodyogiki Vishwavidyalaya, Bhopal, India under the guidance of Dr. Dilip Sharma of the Electronics and Communication Engineering department at Ujjain Engineering College. The project involved developing a system that uses a GPS module to track the location of a vehicle and send it via GSM to a predefined number or laptop when activated. The system can also be activated by detecting accidents, fire, or theft. The report includes sections on methodology, requirements, coding, advantages, results, and conclusions.
CAR ACCIDENT detection using IR SENSOR &
This document describes a smart vehicle system that provides tracking, accident detection, and antitheft features. The system uses sensors and GPS to monitor the vehicle's location and detect accidents. If an accident occurs, the system alerts emergency services and contacts provided by the owner. The goal is to enhance vehicle safety, security, and efficiency through integrated technologies like GPS tracking, collision detection sensors, remote monitoring, and anti-theft measures.
IRJET- Vehicle Accident Detection System using GSM and GPS
This document describes a vehicle accident detection system that uses a microcontroller along with sensors like an accelerometer, GPS, and GSM modules. When an accident occurs, the accelerometer detects vibrations and sends a signal to the microcontroller. The microcontroller then uses the GPS module to get the location coordinates and sends an alert message with the coordinates via the GSM module to emergency contacts. This helps reduce response times and locate accidents quickly to provide faster medical assistance, potentially saving lives. The system is intended to automatically detect accidents and alert help unless manually overridden by the driver if assistance is not needed.
IRJET - Accident Prevention Control System and Detection of Lost Key
This document describes a project to develop an accident prevention and control system using sensors and a microcontroller, as well as a system to detect lost keys using GPS. The accident prevention system uses an ultrasonic sensor to measure distance to nearby objects, and alerts the driver or takes actions like disabling the ignition if distances become too small. If an accident still occurs, the system uses GPS to locate the coordinates and sends an SMS using GSM to emergency contacts. The lost key detection system inserts a GPS module into keys to track their location via a mobile phone app or web page if lost. The system is intended to reduce accidents and provide safety, while having low cost, simple design, and low power consumption.
Heart attack and alcohol detection sensor using internet of things
—In this system we tend to implement a heart-beat observation and heart failure detection system victimization
using the Internet of things. Recently we have got enlarged range of heart diseases as well as enlarged risk of heart
attacks. The detector is then interfaced to a microcontroller that enables checking pulse rate readings and transmittal
them over web. The user might set the high likewise as low levels of heart beat limit. Once setting these limits, the system
starts observation as shortly as patient heart beat goes on top of an explicit limit, the system sends response to the
controller that then transmits this over the net and alerts the doctors likewise as involved. This technique is employed to
watch heartbeat rate of the motive force perpetually and prevents from the accidents by dominant through IOT. IOT
conveys the emergency message to the Owner, auto and therefore the Police. Arduino processor ATmega328 is ready to
handle a lot of functions than standard microcontrollers. This technique is intended for the protection of individuals
sitting within the vehicle.
Ijisa v5-n9-10
This system tracks vehicles using GPS and locks or unlocks engines via GSM. It continuously monitors a vehicle's location via GPS and can report the status on demand via GSM. If theft is detected, the owner can send an SMS to stop the engine. An authorized person must then enter a password via SMS to restart the engine. This provides secure, reliable, and low-cost vehicle tracking and theft prevention.
IRJET-Automatic Vehicle Accident Detection and Messaging System using GSM and...
This document describes an automatic vehicle accident detection and messaging system using GPS and GSM technology. The system uses a sensor to detect if a vehicle has been in an accident. If an accident is detected, the sensor notifies a microcontroller which then sends an alert message with the vehicle's location (determined by GPS) to emergency contacts via GSM. This is done to notify authorities and loved ones of the accident quickly in order to save lives. The system provides accident detection and location services to help emergency responders arrive faster when seconds matter most.
ACCIDENT DETECTION USING MOBILE PHONE.pptx
This document describes a proposed system to detect vehicle accidents using a mobile phone. The system uses a heartbeat sensor integrated with an Android phone to detect changes in heartbeat that may indicate an accident. If an accident is detected, the phone will send an SMS message with the location from the GPS module to pre-configured emergency contacts for assistance. The system aims to reduce road accident deaths in India by providing quick emergency notification.
Smart IoT Device for Vehicle Theft
This document proposes a smart IoT device for two-wheelers to prevent theft. The existing systems have drawbacks like constantly using energy to track vehicles. The proposed system uses a vibration sensor and switch to detect movement only in parking mode. It sends alerts to the user's phone with GPS coordinates if movement is detected. It connects to a cloud server through LPWA when in parking mode to detect movement and send alerts. This provides a low-cost, small device to detect theft and track vehicles using less energy.
Advanced remote accident information system using gsm
This document describes an advanced remote accident information system using GPS and GSM technology. The system uses a piezoelectric sensor and microcontroller to detect vehicle vibrations during an accident. It then sends the vehicle's location data obtained from the GPS receiver via GSM modem to predefined contacts as an SMS alert. This allows family and emergency services to be immediately notified of the accident and its location.
Advanced remote accident information system using gsm
This document describes an advanced remote accident information system using GPS and GSM technology. The system uses a piezoelectric sensor and microcontroller to detect vehicle vibrations during an accident. It then sends the vehicle's location data obtained from the GPS receiver via GSM modem to predefined contacts as an SMS alert. This allows family and emergency services to be immediately notified of accidents with the location, improving safety and emergency response time.
Advanced remote accident information system using gsm
This document describes an advanced remote accident information system using GPS and GSM technology. The system uses a piezoelectric sensor and microcontroller to detect vehicle vibrations during an accident. It then sends the vehicle's location data obtained from the GPS receiver via GSM modem to predefined contacts as an SMS alert. This allows family and emergency services to be immediately notified of accidents with the location, improving safety and emergency response time.
ppt solar.pptx
The document describes the design and construction of an Arduino-based solar inverter using PWM pulses. A block diagram shows the key components: a solar panel converts sunlight to DC power, an Arduino Uno controls the system with PWM signals, and a DC to AC inverter converts the solar-generated DC power to AC power that can run household appliances. The system was set up in a lab for testing. It concludes that solar power systems can be made more cost-efficient and are an environmentally friendly way to harness available solar energy.
More Related Content
Similar to Accelerometer or gravity sensor based accident sms notification using gsm module.pptx
Review on technique used to detect and report the cause of accident.
This document reviews techniques used to detect and report the cause of road accidents. It discusses several methods including using GPS and GSM to send location data to emergency services, detecting accidents through sensors that measure vehicle tilt, vibration and orientation, using ultrasonic sensors to monitor vehicle distances, and simulating traffic accidents using the SUMO program. The aim is to analyze existing approaches to predict, detect and prevent deaths from road accidents in order to lower fatality rates and ensure emergency services can respond quickly.
50120130405010
The document describes a proposed vehicle black box system that uses an accelerometer, GPS, and GSM components for driver assistance and accident alert capabilities. The system is intended to automatically contact emergency services if an accident is detected by sending a short message with the vehicle's location. This would help reduce response times in remote areas. Additionally, the system could allow vehicle owners to remotely track or be alerted to theft attempts by calling or messaging the owner's phone. The proposed system aims to address issues with current vehicle security and response limitations after an accident occurs.
50120130405010
This document summarizes a research paper that proposes a vehicle black box system using sensors for driver assistance and accident alerts. The system would use an accelerometer, GPS, and GSM module to detect if an accident occurs. If an accident is detected, the system would send SMS messages with the vehicle's location to emergency contacts and services after a 1 minute delay. This would help provide faster emergency response. The document discusses the design of the system and algorithms for location tracking and distance calculation that would be used. It also reviews other related literature on using sensor data for accident analysis and surveillance.
Vehicle accident detection system (VAD)
The main objective of our project is to provide an optimum solution to the traffic hazards and the road accidents. According to this project when a vehicle meets with an accident, immediately vibration sensor will detect the signal and sends it to ARM controller. Microcontroller sends the alert message through the GSM MODEM including the location to police control room or a rescue team. So the police can immediately trace the location through the GPS MODEM after receiving the information.
Vehicle Theft Control and Accident Location Intimation Through SMS
Human life is more valuable than anything else, timely help is more important than lending a helping hand. This project is one among those which is designed in a way to save human lives in a timely manner. In modern day vehicles, vehicle anti-theft system is of prime importance and traffic accidents are one of the leading causes of fatalities. An important indicator of survival rates after an accident is the time between the accident and when emergency medical personnel are dispatched to the accident location. By eliminating the time between when an accident occurs and when the first responders are dispatched to the scene decreases mortality rates, we can save lives. There are two main modules discussed in the project. In this project the first module is password based security system to access the vehicle. And the second one is accident location intimation through SMS by using GSM module.
ALPHA-ACCIDENT LOCATION PATIENT HEALTH ASSISTENCE
This document describes a proposed accident detection and alert system that uses various sensors and communication modules. The system uses an Arduino microcontroller that interfaces with an impact sensor, GPS module, and GSM module. When an accident is detected by the impact sensor, the Arduino reads the vehicle's location from the GPS module and sends this information via text message to emergency contacts using the GSM module. The goal is to detect vehicle accidents and quickly alert emergency services to the accident location to save lives.
IRJET- Car Obstacle Detection and Pollution Level Tracing using Node MCU
This document describes a system that uses sensors installed in vehicles to detect obstacles and monitor pollution levels. The system uses an ultrasonic sensor to detect objects in front of the vehicle to avoid accidents. It also uses gas sensors to detect CO2 emitted from the vehicle. When obstacles are detected, the system automatically controls the vehicle speed to avoid collisions. The pollution levels are also monitored and notifications are sent if levels exceed standards. The system aims to reduce road accidents and monitor vehicle emissions using sensors and microcontrollers connected to the Internet of Things.
final review ppt.ppt
This document presents a project on developing a smart vehicle accident detection and rescue system using IoT. The system aims to automatically detect vehicle accidents and alert nearby people, hospitals, and police. It also sends location details to help with rescue efforts. The proposed system uses sensors to detect accidents and an IoT module to communicate accident details via a cloud network. If the accident is minor, drivers can press a reset button to avoid alerts. Otherwise, location and vehicle data is sent for emergency response. The system was tested on vehicles and aims to reduce accident fatalities by expediting rescue times.
A Major Project Report On Quot VEHICLE TRACKING SYSTEM USING GPS AND GSM Q...
This document is a project report on a vehicle tracking system using GPS and GSM. It was submitted by four students to Rajiv Gandhi Prodyogiki Vishwavidyalaya, Bhopal, India under the guidance of Dr. Dilip Sharma of the Electronics and Communication Engineering department at Ujjain Engineering College. The project involved developing a system that uses a GPS module to track the location of a vehicle and send it via GSM to a predefined number or laptop when activated. The system can also be activated by detecting accidents, fire, or theft. The report includes sections on methodology, requirements, coding, advantages, results, and conclusions.
CAR ACCIDENT detection using IR SENSOR &
This document describes a smart vehicle system that provides tracking, accident detection, and antitheft features. The system uses sensors and GPS to monitor the vehicle's location and detect accidents. If an accident occurs, the system alerts emergency services and contacts provided by the owner. The goal is to enhance vehicle safety, security, and efficiency through integrated technologies like GPS tracking, collision detection sensors, remote monitoring, and anti-theft measures.
IRJET- Vehicle Accident Detection System using GSM and GPS
This document describes a vehicle accident detection system that uses a microcontroller along with sensors like an accelerometer, GPS, and GSM modules. When an accident occurs, the accelerometer detects vibrations and sends a signal to the microcontroller. The microcontroller then uses the GPS module to get the location coordinates and sends an alert message with the coordinates via the GSM module to emergency contacts. This helps reduce response times and locate accidents quickly to provide faster medical assistance, potentially saving lives. The system is intended to automatically detect accidents and alert help unless manually overridden by the driver if assistance is not needed.
IRJET - Accident Prevention Control System and Detection of Lost Key
This document describes a project to develop an accident prevention and control system using sensors and a microcontroller, as well as a system to detect lost keys using GPS. The accident prevention system uses an ultrasonic sensor to measure distance to nearby objects, and alerts the driver or takes actions like disabling the ignition if distances become too small. If an accident still occurs, the system uses GPS to locate the coordinates and sends an SMS using GSM to emergency contacts. The lost key detection system inserts a GPS module into keys to track their location via a mobile phone app or web page if lost. The system is intended to reduce accidents and provide safety, while having low cost, simple design, and low power consumption.
Heart attack and alcohol detection sensor using internet of things
—In this system we tend to implement a heart-beat observation and heart failure detection system victimization
using the Internet of things. Recently we have got enlarged range of heart diseases as well as enlarged risk of heart
attacks. The detector is then interfaced to a microcontroller that enables checking pulse rate readings and transmittal
them over web. The user might set the high likewise as low levels of heart beat limit. Once setting these limits, the system
starts observation as shortly as patient heart beat goes on top of an explicit limit, the system sends response to the
controller that then transmits this over the net and alerts the doctors likewise as involved. This technique is employed to
watch heartbeat rate of the motive force perpetually and prevents from the accidents by dominant through IOT. IOT
conveys the emergency message to the Owner, auto and therefore the Police. Arduino processor ATmega328 is ready to
handle a lot of functions than standard microcontrollers. This technique is intended for the protection of individuals
sitting within the vehicle.
Ijisa v5-n9-10
This system tracks vehicles using GPS and locks or unlocks engines via GSM. It continuously monitors a vehicle's location via GPS and can report the status on demand via GSM. If theft is detected, the owner can send an SMS to stop the engine. An authorized person must then enter a password via SMS to restart the engine. This provides secure, reliable, and low-cost vehicle tracking and theft prevention.
IRJET-Automatic Vehicle Accident Detection and Messaging System using GSM and...
This document describes an automatic vehicle accident detection and messaging system using GPS and GSM technology. The system uses a sensor to detect if a vehicle has been in an accident. If an accident is detected, the sensor notifies a microcontroller which then sends an alert message with the vehicle's location (determined by GPS) to emergency contacts via GSM. This is done to notify authorities and loved ones of the accident quickly in order to save lives. The system provides accident detection and location services to help emergency responders arrive faster when seconds matter most.
ACCIDENT DETECTION USING MOBILE PHONE.pptx
This document describes a proposed system to detect vehicle accidents using a mobile phone. The system uses a heartbeat sensor integrated with an Android phone to detect changes in heartbeat that may indicate an accident. If an accident is detected, the phone will send an SMS message with the location from the GPS module to pre-configured emergency contacts for assistance. The system aims to reduce road accident deaths in India by providing quick emergency notification.
Smart IoT Device for Vehicle Theft
This document proposes a smart IoT device for two-wheelers to prevent theft. The existing systems have drawbacks like constantly using energy to track vehicles. The proposed system uses a vibration sensor and switch to detect movement only in parking mode. It sends alerts to the user's phone with GPS coordinates if movement is detected. It connects to a cloud server through LPWA when in parking mode to detect movement and send alerts. This provides a low-cost, small device to detect theft and track vehicles using less energy.
Advanced remote accident information system using gsm
This document describes an advanced remote accident information system using GPS and GSM technology. The system uses a piezoelectric sensor and microcontroller to detect vehicle vibrations during an accident. It then sends the vehicle's location data obtained from the GPS receiver via GSM modem to predefined contacts as an SMS alert. This allows family and emergency services to be immediately notified of the accident and its location.
Advanced remote accident information system using gsm
This document describes an advanced remote accident information system using GPS and GSM technology. The system uses a piezoelectric sensor and microcontroller to detect vehicle vibrations during an accident. It then sends the vehicle's location data obtained from the GPS receiver via GSM modem to predefined contacts as an SMS alert. This allows family and emergency services to be immediately notified of accidents with the location, improving safety and emergency response time.
Advanced remote accident information system using gsm
This document describes an advanced remote accident information system using GPS and GSM technology. The system uses a piezoelectric sensor and microcontroller to detect vehicle vibrations during an accident. It then sends the vehicle's location data obtained from the GPS receiver via GSM modem to predefined contacts as an SMS alert. This allows family and emergency services to be immediately notified of accidents with the location, improving safety and emergency response time.
Similar to Accelerometer or gravity sensor based accident sms notification using gsm module.pptx (20)
Review on technique used to detect and report the cause of accident.
Review on technique used to detect and report the cause of accident.
Vehicle Theft Control and Accident Location Intimation Through SMS
Vehicle Theft Control and Accident Location Intimation Through SMS
IRJET- Car Obstacle Detection and Pollution Level Tracing using Node MCU
IRJET- Car Obstacle Detection and Pollution Level Tracing using Node MCU
A Major Project Report On Quot VEHICLE TRACKING SYSTEM USING GPS AND GSM Q...
A Major Project Report On Quot VEHICLE TRACKING SYSTEM USING GPS AND GSM Q...
IRJET- Vehicle Accident Detection System using GSM and GPS
IRJET- Vehicle Accident Detection System using GSM and GPS
IRJET - Accident Prevention Control System and Detection of Lost Key
IRJET - Accident Prevention Control System and Detection of Lost Key
Heart attack and alcohol detection sensor using internet of things
Heart attack and alcohol detection sensor using internet of things
IRJET-Automatic Vehicle Accident Detection and Messaging System using GSM and...
IRJET-Automatic Vehicle Accident Detection and Messaging System using GSM and...
Advanced remote accident information system using gsm
Advanced remote accident information system using gsm
Advanced remote accident information system using gsm
Advanced remote accident information system using gsm
Advanced remote accident information system using gsm
Advanced remote accident information system using gsm
More from rashed shovon
ppt solar.pptx
The document describes the design and construction of an Arduino-based solar inverter using PWM pulses. A block diagram shows the key components: a solar panel converts sunlight to DC power, an Arduino Uno controls the system with PWM signals, and a DC to AC inverter converts the solar-generated DC power to AC power that can run household appliances. The system was set up in a lab for testing. It concludes that solar power systems can be made more cost-efficient and are an environmentally friendly way to harness available solar energy.
Wireless EV Charging.pptx
This document summarizes a student project to design and implement a wireless electric vehicle charging system. The system uses inductive charging to transfer power from a transmitting pad to a receiving pad located on an electric vehicle, allowing the vehicle to charge without a physical connection. The objectives are to make charging more efficient and convenient. The system components include a power supply, transmitting pad, wireless data transfer, receiving pad, controller, and battery. Testing showed the system could transfer about 12V of power over a maximum ground clearance of 20cm, with an efficiency of 20.4%. Further research may improve efficiency and allow charging over larger distances.
SME Seminer Presentation.pdf
(1) VVIC IoT provides IoT services to help increase skills and productivity with low costs. (2) It introduces connectivity and data sharing solutions as well as case studies on taxi tracking for Bangladesh Army and connected cars. (3) It aims to bring meaningful solutions to problems through IoT and new technologies, helping partners grow sustainably.
Gas Leakage.pptx
This document describes a microcontroller-based gas leakage detection and alarm system. The system uses a gas sensor connected to a microcontroller to detect dangerous levels of LPG or natural gas. If gas is detected above a certain threshold, the microcontroller will activate an indicator and buzzer to sound an alarm. The system is designed to integrate the gas sensor and alarm into a single unit to warn of gas leaks in homes.
ppt accident notification.pptx
This document describes the design and implementation of a vehicle accident notification system using a gravity sensor. The system uses an Arduino Nano, accelerometer gravity sensor, GSM and GPS modules to detect when a vehicle accident occurs, determine the location, and notify emergency services. When an accident is detected, the system sends a notification through the GSM module with the accident location from the GPS module to alert rescue teams so they can quickly respond. The aim is to automatically detect accidents and alert emergency services to improve emergency response times.
More from rashed shovon (6)
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Accelerometer or gravity sensor based accident sms notification using gsm module.pptx
- 1. Design & Implementation of GPS & GSM Based Vehicle Accident Notification System For Code , Diagram or any kind of Project help Whatsapp : +8801739575990 Email : bdeeeproject@gmail.com Facebook : www.facebook.com/EEEProjectBangladesh Youtube : www.youtube.com/@eeeprojectbd9888
- 2. ABSTRACT The fastest growth of technology has made our lifestyle Comfort. The technology also increased the traffic risks and the road accidents take place frequently which causes huge loss of life because inadequate of emergency facility our project will help this displacement. The project concludes when a vehicle meets with an accident, the Accelerometer Gravity Sensor will analyze the signal and this signal to Arduino. The notification is sent through GSM module the location of the accident is gathered with the help of GPS module, to notify police control room or a rescue team. So, the police or rescue team can immediately trace the location through the GPS Module, after receiving the information. Then after confirming the location necessary action will be taken And Video of the accident can be live streamed or can be stored with the help of camera. The aim of this work is to automatically detect an accident and alert the rescue team or control station.
- 3. Single Axis Trackers: Objectives 1. Instant accident notification 2. Accident spot tracking 3. Safety Driving 4. Remote location access by GSM & GPS
- 5. Advantages: ▪ This method is a system of urgent assistance. ▪ Monitors all risks and hazards. ▪ To the nearest hospitals and police stations, warning notices are sent. ▪ It can be included in an affordable program. The warning message about the accident is sent automatically. ▪ It is possible to use this scheme for a social cause.
- 6. Applications ▪ It can be used to shield passengers in cars/motor vehicles. ▪ It may be used by the health department to survey the wider scale of incidents that have occurred. ▪ We can also use this framework in traffic estimation with some modifications.
- 7. Future Development: 1. Multiple sensors 2. Data logger 3. Desktop application for real time monitoring 4. Multi node points for communication
- 8. Conclusion This device offers the most realistic alternative to the inadequate emergency services given to victims of road accidents. With the aid of this technology, when an accident happens, prompt action can be taken by alerting the appropriate individuals by sending a message.
- 9. Thank You!