Abstract for artificial retina using tft's
•Download as DOC, PDF•
3 likes•1,417 views
An artificial retina is proposed that uses thin-film transistors fabricated on transparent and flexible substrates. The artificial retina would be implanted on the inside surface of the living retina in the back of the eye. Electronic photo devices and circuits integrated onto the artificial retina would substitute for deteriorated photoreceptor cells. A wireless power supply would drive the artificial retina to eliminate connection wires and realize a completely internal artificial organ.
Report
Share
Report
Share
Recommended
artificial retina using thin film transistor
This document discusses artificial retina technology which uses microelectronics and microchip electrodes surgically implanted into the back of the eye to restore vision for patients with damaged photoreceptor cells. It describes the components of an artificial retina implant, including photodiodes that sense light and stimulate retinal nerve cells. The document also outlines the fabrication process for artificial retinas using thin-film transistors on flexible substrates, and discusses some patients' experiences of regained vision with these implants.
Dankumar
The document discusses the development of an artificial retina using thin film transistor technology. It describes how retinal conditions like retinitis pigmentosa and age-related macular degeneration cause vision loss and how an artificial retina could help. The artificial retina would be implanted either on top of the retina (epiretinal) or underneath (subretinal) and use thin film transistors to detect light and stimulate remaining retinal cells via electrical pulses. Both approaches have advantages and disadvantages relating to attachment, heat dissipation, power requirements and image processing. Complications from long-term implantation are also addressed. The technology shows promise for restoring basic vision but has limitations and further development is still needed.
ARITIFICIAL RETINAa
This document summarizes an artificial retina system (ARS) that aims to restore vision to blind individuals. It discusses the history of ARS development led by Dr. Mark Humayun beginning in 2002. The first ARS model, Argus I, contained 16 electrodes and allowed patients to distinguish light and dark and locate objects. Later models like Argus II contained more electrodes and were smaller and less invasive. The ARS works by implanting a chip containing electrodes that stimulate the retina. Technological challenges remain around biocompatibility, resolution, and cost, but advances are being made to improve the design. The overall goal is for ARS to help millions of blind individuals see well enough to navigate, read, and recognize faces
artificial Retina
This document presents information on an artificial retina. It discusses how the natural retina works and the disease of age-related macular degeneration. An artificial retina uses thin-film transistors implanted on the back of the eye to replace non-functioning retinal cells. It consists of a digital camera, video processing unit, radio transmitter and receiver, and retinal implant. The implant stimulates the retina to send signals to the brain to restore vision. However, the technology has limitations like difficulty repairing devices and high cost.
Artificial retina
Artifical retina
have a look at my website about gaming
http://cocbases.com/
http://www.cocwiki.net/
Artificial retina using thin film transistor technology
The document describes the development of an artificial retina using thin-film transistors (TFTs) that can be implanted in the back of the human eye. The artificial retina contains photo sensors and circuits integrated on a flexible substrate using poly-silicon TFTs. It receives wireless power through inductive coupling between an external coil and an internal receiving coil embedded in the eye. The artificial retina is aimed at restoring vision by stimulating the retina with an array of pixels that output different voltages based on light levels detected by phototransistors.
Artificial retina implantaion using mems
This document discusses the development of an artificial retina implant using microelectromechanical systems (MEMS) technology. It begins with an overview of retinal diseases like retinitis pigmentosa and age-related macular degeneration that could be treated with such an implant. It then describes two approaches for retinal implants - the epiretinal approach, which stimulates the ganglion cells, and the subretinal approach, which replaces photoreceptors with photodiodes. The document focuses on the epiretinal implant, outlining its components like a microcable and electrodes, and the microfabrication process used to create the thin polyimide film for the implant. It concludes that MEMS technology can play an
IEEE BASE paper on artifical retina using TTF technology
This document summarizes research on an artificial retina that uses thin-film transistors driven by a wireless power supply. Key points:
- The artificial retina is fabricated on a transparent and flexible substrate to allow implantation on the curved human retina using an epiretinal method. This preserves high image resolution and minimally damages living retinal tissue.
- A wireless power system using inductive coupling, rectification, and voltage regulation was developed and shown to provide enough stable power for the artificial retina's operation, despite some output voltage fluctuations.
- Testing showed the artificial retina could correctly detect illumination profiles as output voltage profiles, even when powered by the unstable wireless source, demonstrating its potential for implant use. However, further development
Recommended
artificial retina using thin film transistor
This document discusses artificial retina technology which uses microelectronics and microchip electrodes surgically implanted into the back of the eye to restore vision for patients with damaged photoreceptor cells. It describes the components of an artificial retina implant, including photodiodes that sense light and stimulate retinal nerve cells. The document also outlines the fabrication process for artificial retinas using thin-film transistors on flexible substrates, and discusses some patients' experiences of regained vision with these implants.
Dankumar
The document discusses the development of an artificial retina using thin film transistor technology. It describes how retinal conditions like retinitis pigmentosa and age-related macular degeneration cause vision loss and how an artificial retina could help. The artificial retina would be implanted either on top of the retina (epiretinal) or underneath (subretinal) and use thin film transistors to detect light and stimulate remaining retinal cells via electrical pulses. Both approaches have advantages and disadvantages relating to attachment, heat dissipation, power requirements and image processing. Complications from long-term implantation are also addressed. The technology shows promise for restoring basic vision but has limitations and further development is still needed.
ARITIFICIAL RETINAa
This document summarizes an artificial retina system (ARS) that aims to restore vision to blind individuals. It discusses the history of ARS development led by Dr. Mark Humayun beginning in 2002. The first ARS model, Argus I, contained 16 electrodes and allowed patients to distinguish light and dark and locate objects. Later models like Argus II contained more electrodes and were smaller and less invasive. The ARS works by implanting a chip containing electrodes that stimulate the retina. Technological challenges remain around biocompatibility, resolution, and cost, but advances are being made to improve the design. The overall goal is for ARS to help millions of blind individuals see well enough to navigate, read, and recognize faces
artificial Retina
This document presents information on an artificial retina. It discusses how the natural retina works and the disease of age-related macular degeneration. An artificial retina uses thin-film transistors implanted on the back of the eye to replace non-functioning retinal cells. It consists of a digital camera, video processing unit, radio transmitter and receiver, and retinal implant. The implant stimulates the retina to send signals to the brain to restore vision. However, the technology has limitations like difficulty repairing devices and high cost.
Artificial retina
Artifical retina
have a look at my website about gaming
http://cocbases.com/
http://www.cocwiki.net/
Artificial retina using thin film transistor technology
The document describes the development of an artificial retina using thin-film transistors (TFTs) that can be implanted in the back of the human eye. The artificial retina contains photo sensors and circuits integrated on a flexible substrate using poly-silicon TFTs. It receives wireless power through inductive coupling between an external coil and an internal receiving coil embedded in the eye. The artificial retina is aimed at restoring vision by stimulating the retina with an array of pixels that output different voltages based on light levels detected by phototransistors.
Artificial retina implantaion using mems
This document discusses the development of an artificial retina implant using microelectromechanical systems (MEMS) technology. It begins with an overview of retinal diseases like retinitis pigmentosa and age-related macular degeneration that could be treated with such an implant. It then describes two approaches for retinal implants - the epiretinal approach, which stimulates the ganglion cells, and the subretinal approach, which replaces photoreceptors with photodiodes. The document focuses on the epiretinal implant, outlining its components like a microcable and electrodes, and the microfabrication process used to create the thin polyimide film for the implant. It concludes that MEMS technology can play an
IEEE BASE paper on artifical retina using TTF technology
This document summarizes research on an artificial retina that uses thin-film transistors driven by a wireless power supply. Key points:
- The artificial retina is fabricated on a transparent and flexible substrate to allow implantation on the curved human retina using an epiretinal method. This preserves high image resolution and minimally damages living retinal tissue.
- A wireless power system using inductive coupling, rectification, and voltage regulation was developed and shown to provide enough stable power for the artificial retina's operation, despite some output voltage fluctuations.
- Testing showed the artificial retina could correctly detect illumination profiles as output voltage profiles, even when powered by the unstable wireless source, demonstrating its potential for implant use. However, further development
Artificial retina using thin film transistor report
The document describes an artificial retina that uses thin-film photodiodes and poly-silicon thin-film transistors. It is fabricated on transparent and flexible substrates to mimic the functions of a natural retina. The artificial retina achieves edge enhancement through a circuit design that processes signals from the photodiodes through current mirrors and load resistances. It can be implanted inside the eye through either epiretinal or subretinal implantation methods to help restore sight for those who have lost vision due to retinal damage or disease.
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
Artificial retinas have been ardently desired to recover the sight sense for sight-handicapped people. We have verified that an artificial retina using poly-Si TFTs can be driven by wireless power supply. It is confirmed that the irradiated light distribution can be reproduced as the output voltage distribution owing to the parameter optimization of the wireless power supply system.
Artificial retina [shweta]
Artificial retinas have been desired to recover the sight sense for sight handicapped people. Electronic Photo devices and circuits substitutes deteriorated photoreceptor cells implanted inside the eyes.
Artificial retina using thin filim Transistor
The document discusses the development of an artificial retina using thin film transistors that can be implanted on the inside surface of the human eye. The artificial retina contains electronic photo devices and circuits integrated on a transparent and flexible substrate. It is intended to help treat retinal diseases like retinitis pigmentosa and macular degeneration by replacing lost photoreceptor cells. The artificial retina uses low-temperature poly-silicon thin film transistors and is powered wirelessly through inductive coupling between an external coil and internal receiving coil embedded in the eyeball. The goal is to provide a prosthetic option to restore vision for those suffering from blindness or low vision.
Soumya Selvaraj (Bionic Eye)
Bionic eye is a device that can provide sight-detection of light.
Researches working for the Boston Retinal Implant Project have been developing Bionic eye implant that could restore the eye sight of people who suffer from age related blindness.
It is based on a small chip that is surgically implanted behind the retina, at the back of the eye ball.
Ultra thin wires strengthens the damaged optic nerve.
The user should wear special eye glasses battery powered camera and a transmitter.
artificial retina
bionic eye boon to person gone blind by degenerative eye diseases like retintis pigmentosa and macular degeneration
Artificial silicon retina main
This document discusses the development of artificial vision systems to cure blindness. It describes how artificial silicon retinas work to restore some vision by bypassing damaged retinal cells. The artificial silicon retina is a tiny microchip implanted in the eye that contains solar cells to convert light into electrical pulses, similar to the function of retinal rods and cones. It receives power from light entering the eye without needing external batteries or wires. Researchers are also developing other implantable microchips like the artificial retina component chip to restore partial vision for the blind.
Artificial silicon ratina
This document summarizes an artificial silicon retina (ASR) seminar presentation. It describes how ASR technology works to restore vision by implanting a microchip retinal prosthesis that converts light into electrical signals. The ASR is small enough to fit in the eye and receives power from light, without needing batteries. It sends signals through the optic nerve to the brain, allowing some patients to perceive images. However, ASR technology remains highly experimental and can only provide basic vision currently. Much more research is still needed to develop it further.
Bionic eye soft copy (2)
This document discusses current research on bionic eyes and their future prospects. It begins by describing the structure and function of the human eye. It then outlines causes of blindness and eye diseases. The document introduces the concept of a bionic eye as a bioelectronic device that can replace or enhance eye functionality. It describes different regions where implants can be placed and discusses approaches like epiretinal and subretinal implantation. The rest of the document focuses on the artificial silicon retina and multiple unit artificial retina chipset system as examples of bionic eye technologies, outlining their design, advantages, and limitations. It concludes by noting the progress made in bionic devices and remaining challenges in providing power and brain interfaces.
Artificial eye
The document discusses artificial eyes and how they work. It describes that artificial eyes consist of a camera, video processing unit, radio transmitter, radio receiver, and retinal implant. The camera captures images and sends them to the video processing unit which simplifies the images into light spots. The processed images are then sent to the retinal implant via the radio transmitter and receiver. The retinal implant stimulates the retina and optic nerve to send signals to the brain, allowing individuals with eye diseases to regain vision. The technology provides basic object and shape recognition but has limitations such as the need for surgery and the high cost. It represents an important development for restoring sight.
Bionic eye a ray of hope
1) 25% of blindness cases are caused by unavoidable conditions like retinitis pigmentosa (RP) and age-related macular degeneration (AMD) that currently have no treatment.
2) Researchers have developed bionic eyes, also known as bioelectronic eyes, to help blind people regain some vision. The Argus II retinal prosthesis approved in 2013 is the first commercial bionic eye.
3) The Argus II system uses a camera mounted on glasses to capture images which are processed and wirelessly transmitted to an implant on the retina. Electrodes in the implant stimulate the optic nerve and allow patients to perceive patterns of light and dark pixels and see basic shapes.
Bionic eyes
The document discusses research on bionic eyes and artificial retina prosthetics to treat blindness. It describes how retinal conditions like retinitis pigmentosa and macular degeneration damage the eye, leading to blindness. Several studies are highlighted that are developing implants like the MIT-Harvard device and artificial silicon retina to replace non-functioning retinal cells and stimulate the optic nerve to restore partial vision. The implants face challenges from unwanted stimulation and need for improved image processing, but show promise for treating blindness from retinal degeneration.
Bionic eye
The document discusses the bio electronic eye, which replaces some or all functionality of the eye using electronics. It provides a history of the development of the bionic eye, describes how the human eye works compared to the bionic version, and details the key components and working principle of the MARC retinal prosthesis system. Some advantages are that it can be implanted with minimal surgery and has low power needs, though limitations include the difficulty of repairs and high costs. The conclusion is that while full vision may not be restored, bionic eyes can help the blind see shapes and objects.
Bionic eye
The document discusses bionic eyes and retinal prosthetics for restoring vision. It describes how a bionic eye works by using a miniature camera to capture images and transmit the data to a microchip implanted behind the retina. The chip then stimulates the retina with electrical pulses to allow signals to be sent to the brain. Several technologies are discussed, including an artificial silicon retina containing photodiodes, the MARC system using an external camera and implanted receiver/stimulator, and ceramic photocells being developed to detect light and repair eyes. While promising, full restoration of vision remains challenging due to the complexity of the human visual system.
Practical solutions in ultra low power design for artificial retina
The document discusses the technical challenges in developing an artificial retina, including achieving ultra-low power consumption of under 300uW. Key challenges include operating circuits in the sub-threshold voltage region, selecting an appropriate low-voltage power source like photovoltaics, and implementing very high resistances and low bandwidths below 100Hz needed for neural interfaces. Addressing these challenges requires specialized microarchitectures, circuit techniques like switched capacitor implementations, and modeling focused on sub-threshold and mismatch effects.
Bionic eye
Bionic eyes are being developed to restore sight for those with blindness. Current bionic eye technology involves implanting a microchip retina that receives signals from an external camera. This allows individuals to perceive light and basic shapes. However, the technology is still limited compared to natural vision. Only one bionic eye system called Argus II is approved for use in the US, helping those blind from retinitis pigmentosa. Researchers hope to improve the technology by adding more electrodes to the retina implant and enabling color perception. Bionic eyes remain an expensive treatment option still in the early stages of development.
Bionic eye hard copy
This document describes the development of bionic eyes or artificial vision technology. It discusses how artificial retinas made of silicon or ceramic photocells could be implanted through microsurgery to detect light and stimulate the retina and optic nerve, restoring some vision. The artificial retina called the ASR contains over 3,500 photodiodes that convert light into electrical signals to stimulate remaining retinal cells. Surgeons implant the microchip by making small incisions in the eye and inserting the chip under the retina without external wires or batteries. This technology holds promise for restoring sight to those blinded by retinal diseases.
ARGUS II
Argus II is an electronic retinal implant
It is manufactured by the American company Second Sight Medical Products
The technology and development of Argus II was pioneered by Mark Humayun
Argus II retinal prosthesis aimed at partially restoring vision to people blinded by retinal degenerative diseases such as retinitis pigmentosa (RP).
Argus II retinal prosthesis system received CE (Conformité Européenne) marking in March 2011 and the Food and Drug Administration (FDA) approval in February 2013
Artificial vision
This document discusses an artificial vision system that could restore sight for those with retinal diseases. It describes the major components of the system: an artificial silicon retina implanted in the eye that converts light to electrical signals; a miniature video camera that captures images; a video processing unit that simplifies the images; and an infrared LCD screen on goggles that converts signals to light pulses for the retina. The system provides basic vision allowing users to identify objects, but has limitations in cost, resolution, and applicability to infants. Overall, it represents an important breakthrough for treating retinal degeneration and other vision-impairing diseases.
Diamond thin films
This document discusses diamond thin films produced through chemical vapor deposition. It describes how CVD involves activating carbon-containing gases through thermal or electrical methods to decompose the gases and deposit diamond on a substrate surface. Key points covered include:
1) CVD is able to grow diamond on non-diamond substrates by thermally decomposing gases like methane and hydrogen at temperatures over 700°C.
2) The deposition process involves gas activation, surface reactions, and diamond nucleation and growth in a three-dimensional crystal structure.
3) Applications of CVD diamond thin films include cutting tools, thermal management, optics, and electronic devices due to diamond's properties of hardness, heat conductivity, and transparency.
Metamaterials
This document provides an overview of metamaterials. It begins by defining metamaterials as materials engineered to have properties that do not occur naturally, such as a negative index of refraction. The document then discusses the history of metamaterials, including early theoretical work in the 1960s and recent developments in fabrication. Examples of potential applications mentioned include invisibility cloaking, subwavelength imaging, and smaller antennas. The document also provides brief descriptions of common metamaterial structures and fabrication techniques using nanostructures like split-ring resonators.
Fuel cells
Fuel cells generate electricity through an electrochemical reaction without combustion, and can use a variety of fuels including hydrogen. They provide higher efficiency than gasoline engines and emit only water and heat as byproducts. While fuel cells have been in development since 1839, limitations remain for widespread adoption, as hydrogen is difficult to store and fuel cells require replacement parts. Proponents argue the technology's benefits outweigh its challenges with proper development.
More Related Content
What's hot
Artificial retina using thin film transistor report
The document describes an artificial retina that uses thin-film photodiodes and poly-silicon thin-film transistors. It is fabricated on transparent and flexible substrates to mimic the functions of a natural retina. The artificial retina achieves edge enhancement through a circuit design that processes signals from the photodiodes through current mirrors and load resistances. It can be implanted inside the eye through either epiretinal or subretinal implantation methods to help restore sight for those who have lost vision due to retinal damage or disease.
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
Artificial retinas have been ardently desired to recover the sight sense for sight-handicapped people. We have verified that an artificial retina using poly-Si TFTs can be driven by wireless power supply. It is confirmed that the irradiated light distribution can be reproduced as the output voltage distribution owing to the parameter optimization of the wireless power supply system.
Artificial retina [shweta]
Artificial retinas have been desired to recover the sight sense for sight handicapped people. Electronic Photo devices and circuits substitutes deteriorated photoreceptor cells implanted inside the eyes.
Artificial retina using thin filim Transistor
The document discusses the development of an artificial retina using thin film transistors that can be implanted on the inside surface of the human eye. The artificial retina contains electronic photo devices and circuits integrated on a transparent and flexible substrate. It is intended to help treat retinal diseases like retinitis pigmentosa and macular degeneration by replacing lost photoreceptor cells. The artificial retina uses low-temperature poly-silicon thin film transistors and is powered wirelessly through inductive coupling between an external coil and internal receiving coil embedded in the eyeball. The goal is to provide a prosthetic option to restore vision for those suffering from blindness or low vision.
Soumya Selvaraj (Bionic Eye)
Bionic eye is a device that can provide sight-detection of light.
Researches working for the Boston Retinal Implant Project have been developing Bionic eye implant that could restore the eye sight of people who suffer from age related blindness.
It is based on a small chip that is surgically implanted behind the retina, at the back of the eye ball.
Ultra thin wires strengthens the damaged optic nerve.
The user should wear special eye glasses battery powered camera and a transmitter.
artificial retina
bionic eye boon to person gone blind by degenerative eye diseases like retintis pigmentosa and macular degeneration
Artificial silicon retina main
This document discusses the development of artificial vision systems to cure blindness. It describes how artificial silicon retinas work to restore some vision by bypassing damaged retinal cells. The artificial silicon retina is a tiny microchip implanted in the eye that contains solar cells to convert light into electrical pulses, similar to the function of retinal rods and cones. It receives power from light entering the eye without needing external batteries or wires. Researchers are also developing other implantable microchips like the artificial retina component chip to restore partial vision for the blind.
Artificial silicon ratina
This document summarizes an artificial silicon retina (ASR) seminar presentation. It describes how ASR technology works to restore vision by implanting a microchip retinal prosthesis that converts light into electrical signals. The ASR is small enough to fit in the eye and receives power from light, without needing batteries. It sends signals through the optic nerve to the brain, allowing some patients to perceive images. However, ASR technology remains highly experimental and can only provide basic vision currently. Much more research is still needed to develop it further.
Bionic eye soft copy (2)
This document discusses current research on bionic eyes and their future prospects. It begins by describing the structure and function of the human eye. It then outlines causes of blindness and eye diseases. The document introduces the concept of a bionic eye as a bioelectronic device that can replace or enhance eye functionality. It describes different regions where implants can be placed and discusses approaches like epiretinal and subretinal implantation. The rest of the document focuses on the artificial silicon retina and multiple unit artificial retina chipset system as examples of bionic eye technologies, outlining their design, advantages, and limitations. It concludes by noting the progress made in bionic devices and remaining challenges in providing power and brain interfaces.
Artificial eye
The document discusses artificial eyes and how they work. It describes that artificial eyes consist of a camera, video processing unit, radio transmitter, radio receiver, and retinal implant. The camera captures images and sends them to the video processing unit which simplifies the images into light spots. The processed images are then sent to the retinal implant via the radio transmitter and receiver. The retinal implant stimulates the retina and optic nerve to send signals to the brain, allowing individuals with eye diseases to regain vision. The technology provides basic object and shape recognition but has limitations such as the need for surgery and the high cost. It represents an important development for restoring sight.
Bionic eye a ray of hope
1) 25% of blindness cases are caused by unavoidable conditions like retinitis pigmentosa (RP) and age-related macular degeneration (AMD) that currently have no treatment.
2) Researchers have developed bionic eyes, also known as bioelectronic eyes, to help blind people regain some vision. The Argus II retinal prosthesis approved in 2013 is the first commercial bionic eye.
3) The Argus II system uses a camera mounted on glasses to capture images which are processed and wirelessly transmitted to an implant on the retina. Electrodes in the implant stimulate the optic nerve and allow patients to perceive patterns of light and dark pixels and see basic shapes.
Bionic eyes
The document discusses research on bionic eyes and artificial retina prosthetics to treat blindness. It describes how retinal conditions like retinitis pigmentosa and macular degeneration damage the eye, leading to blindness. Several studies are highlighted that are developing implants like the MIT-Harvard device and artificial silicon retina to replace non-functioning retinal cells and stimulate the optic nerve to restore partial vision. The implants face challenges from unwanted stimulation and need for improved image processing, but show promise for treating blindness from retinal degeneration.
Bionic eye
The document discusses the bio electronic eye, which replaces some or all functionality of the eye using electronics. It provides a history of the development of the bionic eye, describes how the human eye works compared to the bionic version, and details the key components and working principle of the MARC retinal prosthesis system. Some advantages are that it can be implanted with minimal surgery and has low power needs, though limitations include the difficulty of repairs and high costs. The conclusion is that while full vision may not be restored, bionic eyes can help the blind see shapes and objects.
Bionic eye
The document discusses bionic eyes and retinal prosthetics for restoring vision. It describes how a bionic eye works by using a miniature camera to capture images and transmit the data to a microchip implanted behind the retina. The chip then stimulates the retina with electrical pulses to allow signals to be sent to the brain. Several technologies are discussed, including an artificial silicon retina containing photodiodes, the MARC system using an external camera and implanted receiver/stimulator, and ceramic photocells being developed to detect light and repair eyes. While promising, full restoration of vision remains challenging due to the complexity of the human visual system.
Practical solutions in ultra low power design for artificial retina
The document discusses the technical challenges in developing an artificial retina, including achieving ultra-low power consumption of under 300uW. Key challenges include operating circuits in the sub-threshold voltage region, selecting an appropriate low-voltage power source like photovoltaics, and implementing very high resistances and low bandwidths below 100Hz needed for neural interfaces. Addressing these challenges requires specialized microarchitectures, circuit techniques like switched capacitor implementations, and modeling focused on sub-threshold and mismatch effects.
Bionic eye
Bionic eyes are being developed to restore sight for those with blindness. Current bionic eye technology involves implanting a microchip retina that receives signals from an external camera. This allows individuals to perceive light and basic shapes. However, the technology is still limited compared to natural vision. Only one bionic eye system called Argus II is approved for use in the US, helping those blind from retinitis pigmentosa. Researchers hope to improve the technology by adding more electrodes to the retina implant and enabling color perception. Bionic eyes remain an expensive treatment option still in the early stages of development.
Bionic eye hard copy
This document describes the development of bionic eyes or artificial vision technology. It discusses how artificial retinas made of silicon or ceramic photocells could be implanted through microsurgery to detect light and stimulate the retina and optic nerve, restoring some vision. The artificial retina called the ASR contains over 3,500 photodiodes that convert light into electrical signals to stimulate remaining retinal cells. Surgeons implant the microchip by making small incisions in the eye and inserting the chip under the retina without external wires or batteries. This technology holds promise for restoring sight to those blinded by retinal diseases.
ARGUS II
Argus II is an electronic retinal implant
It is manufactured by the American company Second Sight Medical Products
The technology and development of Argus II was pioneered by Mark Humayun
Argus II retinal prosthesis aimed at partially restoring vision to people blinded by retinal degenerative diseases such as retinitis pigmentosa (RP).
Argus II retinal prosthesis system received CE (Conformité Européenne) marking in March 2011 and the Food and Drug Administration (FDA) approval in February 2013
Artificial vision
This document discusses an artificial vision system that could restore sight for those with retinal diseases. It describes the major components of the system: an artificial silicon retina implanted in the eye that converts light to electrical signals; a miniature video camera that captures images; a video processing unit that simplifies the images; and an infrared LCD screen on goggles that converts signals to light pulses for the retina. The system provides basic vision allowing users to identify objects, but has limitations in cost, resolution, and applicability to infants. Overall, it represents an important breakthrough for treating retinal degeneration and other vision-impairing diseases.
What's hot (19)
Artificial retina using thin film transistor report
Artificial retina using thin film transistor report
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
ARTIFICIAL RETINA USING THIN FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY
Practical solutions in ultra low power design for artificial retina
Practical solutions in ultra low power design for artificial retina
Viewers also liked
Diamond thin films
This document discusses diamond thin films produced through chemical vapor deposition. It describes how CVD involves activating carbon-containing gases through thermal or electrical methods to decompose the gases and deposit diamond on a substrate surface. Key points covered include:
1) CVD is able to grow diamond on non-diamond substrates by thermally decomposing gases like methane and hydrogen at temperatures over 700°C.
2) The deposition process involves gas activation, surface reactions, and diamond nucleation and growth in a three-dimensional crystal structure.
3) Applications of CVD diamond thin films include cutting tools, thermal management, optics, and electronic devices due to diamond's properties of hardness, heat conductivity, and transparency.
Metamaterials
This document provides an overview of metamaterials. It begins by defining metamaterials as materials engineered to have properties that do not occur naturally, such as a negative index of refraction. The document then discusses the history of metamaterials, including early theoretical work in the 1960s and recent developments in fabrication. Examples of potential applications mentioned include invisibility cloaking, subwavelength imaging, and smaller antennas. The document also provides brief descriptions of common metamaterial structures and fabrication techniques using nanostructures like split-ring resonators.
Fuel cells
Fuel cells generate electricity through an electrochemical reaction without combustion, and can use a variety of fuels including hydrogen. They provide higher efficiency than gasoline engines and emit only water and heat as byproducts. While fuel cells have been in development since 1839, limitations remain for widespread adoption, as hydrogen is difficult to store and fuel cells require replacement parts. Proponents argue the technology's benefits outweigh its challenges with proper development.
Gems
Gems are expensive mineral stones that provide links between various scientific fields. There are about 150 natural gem compounds. Diamonds, emeralds, rubies, and sapphires sell at the highest prices due to their beauty, rarity, traditions, and perceptions of permanence. Gems have characteristics like color, refractive index, dispersion, absorption, and facets that make them attractive. Their properties like hardness, chemical stability, and double refraction also provide practical applications beyond decoration. Many gems like quartz, topaz, and tourmaline are studied scientifically or believed to have healing properties according to traditions.
Kater's
This document discusses pendulums and their use in measuring gravity. It begins by defining a pendulum as something that hangs from a fixed point and swings due to gravity. It then discusses how pendulums can be used to accurately measure the acceleration due to gravity (g), which is important for determining the shape of the Earth. The document goes on to introduce the compound pendulum, which has a hole drilled through its mass and can swing from side to side on a fixed peg passed through the hole. It describes how Kater's reversible pendulum uses two movable masses on each end of a pivoted rod to precisely measure g by equalizing the periods of oscillation on both sides.
Na based supercapacitors
Tuning electrochemical properties of NaMPO4 nanoparticles for their application in Na-ion supercapacitors.
modified carbon fibre composite
Metals, however much we need it or admire it , the drawbacks of it has to be considered.( high density, susceptibility to corrosion,availability etc)
Instead planes of carbon fibre composites can be made without using a tiny scrap of metal, if only we can alter its conductivity issues. that is addressed by a research paper , on the basis of which my ppt is based.
Diamond films
In just one click, Semiconsoft offers instrument that measure the thickness of thin film. Visit here for more detail: http://www.semiconsoft.com/wp/applications/
Flouroscence
This document discusses different types of luminescence, including fluorescence, phosphorescence, chemiluminescence, sonoluminescence, cathodoluminescence, and electroluminescence. It provides examples of each type, such as how scorpions glow under UV light due to fluorescence and how fireflies use chemiluminescence to attract mates. The document also discusses applications of luminescence like using luminol in forensics to detect traces of blood and glow sticks that use chemiluminescence.
Viewers also liked (9)
Similar to Abstract for artificial retina using tft's
Iaetsd silverline for the blind
This document summarizes research on developing artificial vision systems to restore sight for the blind. It describes two key technologies: the artificial silicon retina and artificial retina component chip. The artificial silicon retina is a microchip implanted in the eye that contains photodiodes that convert light into electrical signals to stimulate the retina. The artificial retina component chip is similar and provides a 10x10 or 250x250 pixel visual field. The document explains how these devices work and the surgical process for implantation. It also outlines an artificial vision system using a camera, signal processor and brain implants to transmit images and provide a limited form of artificial sight.
plasitc
This document summarizes research on developing artificial vision systems to restore sight to blind individuals. It describes two main approaches: retinal implants like the artificial silicon retina that replace photoreceptors in the retina, and cortical implants that stimulate the visual cortex. The document outlines how these systems work, including capturing images with a camera and processing signals to stimulate the retina or brain. It also discusses the current limitations of artificial vision and ongoing research needed to improve image clarity and functionality for blind individuals.
Arti
This document summarizes research on developing artificial vision systems to restore sight to blind individuals. It describes two main approaches: retinal implants like the artificial silicon retina that replace photoreceptors in the retina, and cortical implants that stimulate the visual cortex. The document outlines how these systems work, including capturing images with a camera and processing signals to stimulate the retina or brain. It also discusses the current limitations of artificial vision and ongoing research needed to improve image clarity and functionality for blind individuals.
49540326 electronic-eye
The document describes the development of an "Electronic Eye" technology to help restore vision. Researchers are creating an artificial retina made of silicon microchips that can be implanted in the eye. The chips contain photodiodes that convert light into electrical signals to bypass retinal cells damaged by conditions like macular degeneration. Early results show people able to see spots of light or basic shapes. The technology relies on a small camera, processor, and implants in the visual cortex to allow some sight. This could help the millions of people worldwide suffering from blindness.
Blind people
This document describes the development of an artificial vision system to cure blindness. It discusses how researchers are developing retinal implants that can process images from a camera into electrical signals that the optic nerve can interpret as vision. The system includes a miniature video camera, a processor to translate images into signals, and an infrared screen on goggles to stimulate a silicon chip implanted on the retina. This technology has potential to restore limited sight to those blinded by retinal degeneration, though it cannot currently provide high-resolution images.
Visual prosthesis
visual prosthesis replicates the natural vision of the eye and are one of the newer innovations in the field of ophthalmology. Helps in degenerative disease like Age related macular degeneration , retinitis pigmentosa etc.
Bionic eye
The document discusses bionic eyes and retinal prosthetics for restoring vision. It describes how a bionic eye works by using a miniature camera to capture images and transmit the signals to a microchip implanted behind the retina. The chip then stimulates the retina to send signals to the brain that can be interpreted as vision. Several technologies are discussed, including an artificial silicon retina containing photodiodes, the MARC system using an external camera and implanted stimulator, and ceramic photocells being developed to detect light and repair eyes. While promising, bionic eyes still only provide basic vision and developing the technology to replicate the full capabilities of the human eye remains challenging.
Bionic eye
1. Scientists are developing a bionic eye called an artificial retina that could restore vision. It works by using a small implanted chip with light-sensitive cells that transmit signals to the optic nerve and brain.
2. The chip detects incoming light and transmits electrical signals to stimulate remaining retinal cells. Early versions used silicon but now scientists are testing ceramic cells that are safer for the human body.
3. The surgery to implant the chip involves making small incisions to insert the chip and use fluid to lift the retina and seal it over the chip. The goal is to replace damaged photoreceptor cells and restore basic vision.
Argus ii bring sight to blind people
The Argus II is a retinal prosthesis system that provides a sense of sight to people who are blind from conditions like macular degeneration. It consists of a camera and video processing unit that captures images and converts them to electrical pulses, a transmitter that sends the pulses to an implanted retinal stimulator with electrodes, which substitutes for damaged photoreceptors. The implant stimulates the retina to allow the brain to interpret patterns of light and dark and form basic visual perceptions. Early testing shows recipients can detect shapes and motion, and the technology may eventually provide clearer vision like facial recognition.
Neuroprosthetics
Neuroprosthetics involves using brain signals acquired from neurons for various purposes like restoring movement in paralyzed patients. Nanotechnology like nano multi-electrode arrays can be used to receive and transmit brain signals more effectively by increasing electrode conduction and reducing incorrect connections with neurons. Neuroprosthetics has applications in both in vivo and in vitro contexts and can help improve functions like movement, speech, and understanding of drug effects on animal behavior and emotions.
Bionic Eye- A vision of hope
A technical paper which throws light on the idea of combining Technology with Biology in order to provide a solution to visually impaired people
Bionic eye
A bionic eye is an artificial device that replaces part or all of the eye's functionality. It works by stimulating the optic nerve with electrical impulses from a camera, allowing the brain to interpret images. Current models consist of a small implanted chip connected to an external camera. The Argus II system has an array of 60 electrodes on the implant that are stimulated by a processing unit to provide basic vision. While it does not fully restore sight, bionic eyes have helped many blind patients regain some ability to see and navigate independently. Researchers are working to improve the technology with higher resolution implants.
bio.ppt
The document discusses research on bionic eyes and artificial retina prosthetics. It provides an overview of causes of blindness and early research electrically stimulating the visual cortex in the 1960s. More recent developments include the MIT-Harvard bionic eye device, which uses a camera and laser to power a retinal implant that produces phosphenes. The Artificial Silicon Retina replaces damaged photoreceptors with a solid state chip containing photo receptors. The Multiple Unit Artificial Retina Chipset system features a compact stimulator chip that provides diagnostic capabilities while reducing stress on the retina. Overall the document outlines progress and future prospects for bionic eyes and retinal implants to restore vision to the blind.
Bionic eye
PPT about VISUAL PROSTHESIS, a vision for blind people, which I made for my college purpose. Gathered Information from its official sites.
Presentation Nanotech 2
1. Retinal prostheses aim to restore vision for those with retinal dystrophies like retinitis pigmentosa which destroy photoreceptors. They work by using a camera to capture images and then stimulating remaining inner retinal cells or ganglion cells with electrodes to generate visual perceptions.
2. Two types of implants exist - epiretinal which sit on top of the retina and subretinal underneath. Issues include biocompatibility and stability of electrode materials over long periods.
3. Carbon nanotubes show potential as an electrode material as they are biocompatible, robust, and flexible with superior electrochemical properties for long-term stimulation. However, their toxicity is a concern requiring further
BionicEye
This document provides an overview of bionic eyes, including how they work and their development. It discusses how Dr. Mark Humayun's research in the late 1990s demonstrated that electrical stimulation of the optic nerve could allow blind individuals to see light. This led to efforts to create a retinal prosthesis that could translate images into electrical pulses. The Argus II is described as the first approved bionic eye, consisting of an externally worn camera and processor that transmit data and power to an implanted retinal chip. The document outlines the components of the Argus II and how it provides a basic form of artificial vision. It notes ongoing research aims to improve resolution and develop third generation devices. Limitations include the invasive surgery required and current high
Artificial Implants and the Field of Visual Prosthesis Research Paper
This document summarizes artificial implants and the field of visual prosthesis. It discusses how retinal diseases like age-related macular degeneration and retinitis pigmentosa cause blindness but leave the visual pathway intact, opening possibilities for visual prostheses. The history of the field is outlined from early electrical stimulation experiments in the brain and retina to establishing cortical, optic nerve, and retinal prostheses. Examples of current epiretinal prostheses like Argus II and subretinal prostheses like Alpha-IMS are provided, along with their advantages and disadvantages.
Bio
The document discusses research into developing a bionic eye to restore vision. It summarizes key breakthroughs like Bradley's 1960s work stimulating the visual cortex. Current research includes the MIT-Harvard device which uses a camera and laser to power a retinal implant. The implant stimulates remaining retinal cells to produce phosphenes. Other projects are developing smaller, more advanced retinal prosthetics like the Multiple Unit Artificial Retina Chipset. While challenges remain, researchers are optimistic that bionic devices can help treat blindness and further enhance human capabilities.
Artifcial Eye
The Artificial Technology from its introduction to its future perspective. if you need report send me mail, would gladly share.
Bionic age by lakshmi
The document discusses bionics, which combines biology and electronics. It describes how bionic devices can replace organs like ears, arms, and eyes. Examples provided include a bionic arm that can rotate 360 degrees and artificial muscles made of materials that contract and expand like human muscles in response to electricity. The document also discusses developments in bionic eyes like an implantable artificial retina and bionic ears. It concludes by questioning whether future generations will be led by humans, robots, or bionic humans.
Similar to Abstract for artificial retina using tft's (20)
Artificial Implants and the Field of Visual Prosthesis Research Paper
Artificial Implants and the Field of Visual Prosthesis Research Paper
Recently uploaded
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Recently uploaded (20)
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Abstract for artificial retina using tft's
- 1. ABSTRACT ARTIFICIAL RETINA USING THIN-FILM TRANSISTORS DRIVEN BY WIRELESS POWER SUPPLY In this Seminar we will be discussing about the Artificial Retina made using Thin-Film Transistors, which can be fabricated on transparent and flexible substrates. Electronic photo devices and circuits are integrated on the artificial retina, which is implanted on the inside surface of the living retina at the back part of the human eyeballs. Since the irradiated light comes from one side of the artificial retina and the stimulus signal goes out of the other side, the transparent substrate is preferable. Moreover, since the human eyeballs are curved, the exible substrate is also preferable. Artificial retinas have been desired to recover the sight sense for sight handicapped people. Recently, artificial retinas using external cameras, stimulus electrodes, and three dimensional large scale integrations (LSIs) have been actively developed for patients suffering from retinitis pigmentosa and age related muscular degeneration. So in this seminar, we will discuss about the possibilities of artificial retina using thin film transistors (TFTs), which can be fabricated on transparent and flexible substrates. Electronic photo devices and circuits are integrated on the artificial retina, which is implanted on the inside surface of the living retina at the back part of the human eyeballs. In addition wireless power supply is used to drive the object. This helps to eliminate the connection wires and to realize complete artificial internal organs to improve the quality of life. Scope: Artificial retinas have been ardently desired to recover the sight sense for sight handicapped people. Here electronic photo devices and circuits substitute for deteriorated photoreceptor cells. References: ( Books/ websites / Journals) IEEE journals
- 2. Student Name: Approved/Disapproved Roll No.: Supervisor Name: Signature: Signature: