Abdulaziz Alghamdi is a professional field service engineer with experience in sample analysis, report writing, regulatory compliance, and documentation. He has worked as a field commissioning engineer for General Electric since 2014, where he performs functionality and reliability tests, installs and calibrates vibration monitoring systems, and ensures customers receive quality products and service. He has a bachelor's degree in control and instrumentation systems engineering and is fluent in Arabic and English with basic German skills.
Dear Respected Sir,
I am forwarding my CV for a Solar Power Plant Installation / Service in Gujarat State or Any Part of India ( Ready to Travel).
Experienced in Solar power plant Field Work (Total Experience: 4.5 years, 3.5 years in Solar Power Plant Project Engineer ( Electrical) ) . I have great skills in solar Power Plant:commissioning and O&M activities, special 100 KW & more solar Power Plant. I want to work on MW solar power Plant project. Please go through my resume attached with this mail.
I have done graduation in B. E. in Electronics & Communication, I have rich skill in Solar Power Plant Electrical PROJECTS and Electrical Grid Power Commissioning, Inspection with Government Chief Electrical Inspector with CAD Drawings, Electrical Safety Rules, and International Standards ( IS) Rules for Project Approval and Project Commissioning.
Currently, on going Solar Rooftop installation of 220 KW on industrial Tin Roof Structure at two locations in Ahmadabad, Gujarat state.
I have good skills in communication and computer network knowledge.
Current CTC: 2.7
Expected CTC: According to your company standards.
Ready to travel to distant sites for inspection & service. Good communication in English. Willing to relocate and travel international ( Passport Ready)
Interested to work sincerely for the growth of the organization and accept Challenges.
Thanking you
With regards,
Mr. Graceson Jacob
Sector 3D,
GANDHINAGAR,
Gujarat
India.
Mob:09824104095 / 09408707445
Dear Respected Sir,
I am forwarding my CV for a Solar Power Plant Installation / Service in Gujarat State or Any Part of India ( Ready to Travel).
Experienced in Solar power plant Field Work (Total Experience: 4.5 years, 3.5 years in Solar Power Plant Project Engineer ( Electrical) ) . I have great skills in solar Power Plant:commissioning and O&M activities, special 100 KW & more solar Power Plant. I want to work on MW solar power Plant project. Please go through my resume attached with this mail.
I have done graduation in B. E. in Electronics & Communication, I have rich skill in Solar Power Plant Electrical PROJECTS and Electrical Grid Power Commissioning, Inspection with Government Chief Electrical Inspector with CAD Drawings, Electrical Safety Rules, and International Standards ( IS) Rules for Project Approval and Project Commissioning.
Currently, on going Solar Rooftop installation of 220 KW on industrial Tin Roof Structure at two locations in Ahmadabad, Gujarat state.
I have good skills in communication and computer network knowledge.
Current CTC: 2.7
Expected CTC: According to your company standards.
Ready to travel to distant sites for inspection & service. Good communication in English. Willing to relocate and travel international ( Passport Ready)
Interested to work sincerely for the growth of the organization and accept Challenges.
Thanking you
With regards,
Mr. Graceson Jacob
Sector 3D,
GANDHINAGAR,
Gujarat
India.
Mob:09824104095 / 09408707445
I possess over 24 years of rich experience in Project Management, Detail Engineering, Planning, Construction, Pre-commissioning, Commissioning, Operations and Maintenance of HVAC System, Oil & Gas /Power Plant / Refinery / Gas Power Plant / GIS / Transmission and Distribution Line from 11 KV to 400 KV /Process Plants, Upgrading of Electrical HV/MV/LV & HVAC Systems. I have successfully completed B.Tech. (Electrical Engineering) and Diploma in Electrical & Instrumentation Engineering.
Creative, ambitious and knowledgeable engineering professional seeks to utilize my perfect skills and experience in the Electrical Engineering Field (Power & controllers) to meet and exceed all goals in your organization while advancing my own Career.
1. ABDULAZIZ ALGHAMDI “Adam”
Ibn Khaldun, Dammam, Eastern Province 32253 • Home: 00966 509681110 • Cell: 00096 503086004 •
azeez.al@gmail.com
Professional Summary
A Professional Field Service Engineer with proven performance in sample analysis, report writing, regulatory
compliance and documentation.
A talented professional with an extensive background in electrical engineering, who takes the lead on site and who
coordinates between other vendors in order to satisfy General Electric Valuable Customers.
Skills
Experienced in PCB layout design & Soldering skills Familiar with Program Arduino micro controller
Familiar in use of Microcomputer controlled systems Creative problem solver
Experienced with both analog/digital modulation Ability to read & understand P&ID drawings
Fast learner Reliable with following up pending , late or
Team player with the ability to work alone administrative work
Self-motivated Experienced multi-tasker
Expert using test & measurement devices Calibration specialist
Experienced in reading vibration graphs Technical support
Work History
Sales Coordinator, 06/2008 to 09/2008
High Advanced Trading Establishment – Saudi Arabia, Riyadh
A Summer job for 3 months - during my summer vacation. The position involved coordination between
suppliers and customers.
Aware and updated about new products in the market.
Cooperative Training , 05/2013 to 08/2013
Rosendhal – Pischelsdorf, Austria
Machines electrical circuit designer.
Understanding electrical components.
Pre-commissioning for the machine before shipping to the customers (Known as "FAT" - Factory Acceptance
Test).
Cooperative Training , 09/2013 to 10/2013
Johann Leimbach – Wuppertal, Germany
Siemens PLC programming
Machines pre-commissioning
Machine cabinets Design and installation
Effective Understanding of actuators and how they work
Cooperative Training , 11/2013 to 12/2013
2. Sikora – Bremen, Germany
Electronics and sensors calibration
Design principles for instrumentation and sensors
Managing work orders
Testing the final product before shipping to customers
Field Commissioning Engineer, 05/2014 to Current
General Electric – Dhrahan, Saudi Arabia
Working for GE Bently Nevada as a S&I Certified Field Engineer in the following scope (machinery vibration
specialist)
Perform the correct functionality & reliability tests for all systems at customer sites
Understanding the plant process - in order to advise customers about the correct utilisation of machinery
Monitoring & Protection Systems
Installation & Calibration of BN vibration sensors on the machines (3300 , 3500 , 1900/65A ,system 1 …. etc)
Integration of BN Systems with third party systems (e.g. DCS, ESD) using communication techniques like
Modbus & OPC through serial communication and Ethernet
Perform factory acceptance tests & site acceptance tests for BN Machinery Monitoring & Protection Systems
Installation & Configuration of Bently Nevada (BN) Machinery Monitoring & Protection system at customer
sites such as Oil & Gas Plants, Power Plants, Petrochemical & other process industries
Perform linearity checks for probes & performance for Seismic transducers - in order to check their integrity
Handling and building strong relationship with GE customers
Ensure that GE customers are experiencing the best quality products and service available in the market
Applying and spreading the GE beliefs, cultures and safety in every site and facility
Team player who can take on the role of a responsible and effective leader and at any time - also with the
ability to work alone
Follows the administrative works and standards with the utmost professionalism
Capability to adopt and accommodate within harsh working and living environments - whilst at the same time
ensuring the constant delivery of excellent quality service to GE's valuable customers
Able to identify, diagnose, analyze and solve problems within a short period of time
Working in a variety of power plants, industrial plants, Oil & Gas plants and Petrochemical plants. Additionally,
I have commissioned a large number of systems on different types of rotating machines ( gas turbines, steam
turbines , motors , pumps , generators … etc).
Worked with a different companies operating different systems (Yokogawa, Invensys, and Honeywell) DCS
Projects Experience
Shaybah NGL and GOSPs (3 months)
PetroRabigh extension (1 week)
Kemya extension (1 week)
YASREF (2 months)
Hawyah NGL (1 month)
Education
Bachelor of Science: Control & Instrumentation Systems Engineering , 2013
K.F.U.P.M - Dhahran - Saudi Arabia
3. President for the Visitation Club in KFUPM in 2012-2013
Member of Seraaj team in 2012-2014 which manufactured a first Saudi solar car to participate in the World
Solar Challenge in Australia.
Attended a Lab View "program" work shop in data acquisition in 2013.
Programming using MATLAB, Simulink, LABVIEW and C language.
Electronics experience, PCB design and manufacturing.
Involved in many undergraduate and post graduate projects
Languages
Arabic is my first language. However, I also have strong proficiency in English (fluency) - and basic skills in the
German language.
I have studied in New Zealand - and worked in Germany and Austria.
Additional Information
Nationality: Saudi Arabian
Marital Status: Single
References
References available on request