1. AVINASH .H.A
E-Mail: avinashbigbags@gmail.com Contact: +919483512407
~ MANAGEMENT LEVEL ASSIGNMENTS ~
~ OPERATIONS & MAINTENANCE /PROJECT PLANNING/ ERECTION/COMMISIONING
CAREER OUTLOOK
ACADEMIA
B.E. in Electrical & Electronics Engineering from JAYACHAMARAGEENDRA COLLEGE OF ENGEINEERING
MYSORE from VTU
Diploma in Electrical & Electronics Engineering from Board of Technical Education, KARNATAKA
PROFICIENCY MATRIX
HOD and heading both mechanical maintenance and Electrical responsible for project planning and
execution
Managing installation and commissioning of the heavy equipments as well as conducting tests & inspections to
ensure operational effectiveness of plant & utilities.
Reviewing engineering drawings, layouts, diagrams, technical specifications, cost estimates for erection &
commission of the plant; reviewing & analyzing contractor's change order proposals & submittals.
Establishing project review, monitoring and status reporting procedures to accurately report progress of the
project to the stakeholders and end user clients.
Planning resource and work scheduling to achieve effective manpower deployment of qualified workforce.
Planning and effecting predictive & preventive maintenance schedules of various equipments to enhance the
equipment reliability and increasing machine up time.
Identifying the areas of obstruction / breakdowns and taking steps to rectify the equipments through application
of trouble shooting tools.
Developing standard maintenance and operation procedures.
Implementing various techniques for cycle time reduction, entailing identification of opportunities, and analysis of
data, conduction of tests, cost benefit analysis, implementation & post audits.
ORGANISATIONAL SCAN
CURENT EMPLOYER: BIG BAGS INTERNATIONAL PVT LTD MANGALORE
Since Jun’99 TO MAY 2012 JK Industries Ltd,
Truck Radial Tyre plant. Mysore
Adroit professional with over 15 years of experience in Project Planning & Management, Operations &
Maintenance, Erection , Installation & Commissioning, Plant Operations and Man Management.
Currently associated with BIG BAGS INTERNATIONAL PVT LTD AS Senior Manager Electrical
B.E. in Electrical & Electronics Engineering at SREE JAYACHAMARAGEENDRA COLLEGE OF
ENGEINEERING MYSORE from VTU
Experience in handling plant operations including planning, resource utilisation, equipment setup,
operations and maintenance, erection and commissioning.
Proven track record in implementing cost saving measures to develop manpower skills, safety measures
and ensuring compliance of various quality measures & TPM.
An effective communicator with excellent skills in building relationships. Possess strong analytical, problem
solving and organizational abilities.
HOD and heading both mechanical maintenance and Electrical responsible for project planning
and execution
2. Growth Path:
Jun’99- Jun’02 Technician -Production and Quality
Jun’02-Jan’08 SENIOR ENGINEER -Plant Maintenance and TPM
Since Jan’08 Dy. Manager- Project Electrical
Role:
Planning & preparation of PLAN, REQUIREMENT,DRAWING BOQ & procurement of material,
budget control & Manage Resources for Erection and Commissioning.
CO-ORDINATE with the govt officials to get power sanctions and other statutory requirements.
Preparing annual maintenance plan for plant equipments and machinery, and execution of the
same as per schedule
Experienced in maintaining all the statutory requirements as per different standards
Managing scope of work for the contactors, receiving quotations, finalize the contactors for the
best price, ensure the completion of the project on time
Conducting Hold daily meetings with the concerned contractors review their daily plans and
monitor manpower / equipment deployment.
Monitoring daily works done for quality and timeliness; ensure adoption of proper work
procedures by the concerned contractors, ensure safety of the work force by training and
implementation of the standards
Verification of work and final billing
To ensure testing of equipments according to the standard, improvise according to production
requirement, ensure desired output of production with desired quality is achieved
Ordering of spares for the equipments
Key area of work experience
Worked extensively in installation & commissioning of medium voltage drives and motors
(ABB ACS1000 DRIVES).
Experienced in Installation & testing of transformer and its controls ( total 6 transformers)
Worked extensively in Installation OF Drives Such as Sinimics G-120,G-150,.,Allen Bradley
Power Flex
Maintenance and managing troubleshooting SINIMICS DRIVE, G-150 & G-120, master drives etc Allen
Bradley &Siemens PLC, BECKHOFF PLC, ABB DRIVE ACS 1000, ACS800, ACS550, SIEMENS S7 400,
S7300 etc controlled m/c
Previous Assignments:
JUNE 1999-2012 DY. MANAGER ELECTRICAL PROJECTS
Jan’99-Jun’99 Kudremukh Iron and Steel Co. Ltd., Mangalore Supervisor
Jun’98-Jan’99 Amrith Engineering, Mangalore Supervisor
TRAININGS ATTENDED
Attended the following:
In-house training on Quality circle
TPM implementation skills
5 S & its Implementation.
SEMIENCE S7-300/400 Programming / Trouble Shooting.
Bakeoff PLC Programming / Trouble Shooting.
3. Trained in drives SINIMICS S-120 from Siemens.
On job training on ABB drieves.
PLC Programming Allen Bradley.
PERSONAL DOSSIER
Date of Birth: 8th
February, 1979
Address: 4/209/1, “Akshaya” KUNJATHABAIL MANGALORE-575015
Linguistics: English, Hindi, Kannada and Tulu.
Following equipments have been commissioned during my project
assignment BIGBAGS INTERNATIONAL (P)LTD MANGALORE
Calculation of capacity of equipments required, estimation, planning, and preparation of layouts,
ordering, erection and commissioning, testing, electrical inspector approvals, EB approvals, PCB
approvals for following also responsible for maintaining of the same
1. Transformer- 3nos
2. 1010 KVA dg- 3 no’s
3. Lt and HT Panels, Metering cubical,
4. Plant and machinery
5. Design and execution of plant lighting work.
6. Fire hydrant system
7. Fire alarm system
8. Air compressors
9. Electrical works for air handling units and also air conditioning units
Following equipments have been commissioned during my project
assignment in JK Tyres & industries ltd Mysore (Radial tyre plant)
Having experience of erection and commissioning of 65 ½” GRM (china) tyre curing press truck bus radial tyre
47 numbers comprising of S7-300 plc and instruments such as pressure transmitter, I to p converters pressure
and temperature recorders etc & also have visited CHINA for the inspection
Hands on experience in erection and commissioning of
o BAMTRI TYRE BUILDING M/C (CHINA),
o SAV TYRE BUILDING M/C (GERMENEY)
Responsible for complete planning, execution and maintenance of lighting of plant
Having experience of erection & commissioning DUPLEX COMPONENT EXTRUDER & COOLING LINE
FROM HF (KRUPP) GREMENY
Experienced in complete execution of mixer (Ban burry) system 3 No’s starting from
Transformer & VCB,
Medium voltage drives,
Mixer control system,
Mixer auxiliaries,
TSS,
85 INCH MILL set up,
BATCH OFF UNIT WITH PACKER STACKER,
BULK CARBON HANDLING SYSTEM,
AUTO CHEMICAL HANDLING SYSTEM, etc
Visited china for the inspection of GRM 65 ½ inch TYRE CURING PRESS