A is correct! The high electronegativity of fluor.pdf
•
0 likes•6 views
A is correct! The high electronegativity of fluorine (4.0 for F vs. 2.5 for carbon) gives the carbon–fluorine bond a significant polarity/dipole moment. The electron density is concentrated around the fluorine, leaving the carbon relatively electron poor. This introduces ionic character to the bond through partial charges (Cd+—Fd-). The partial charges on the fluorine and carbon are attractive, contributing to the unusual bond strength of the carbon–fluorine bond. According to this same reason, with decreasing the Electronegativity (EN) from F to I, the C-X bond become weaker. Solution A is correct! The high electronegativity of fluorine (4.0 for F vs. 2.5 for carbon) gives the carbon–fluorine bond a significant polarity/dipole moment. The electron density is concentrated around the fluorine, leaving the carbon relatively electron poor. This introduces ionic character to the bond through partial charges (Cd+—Fd-). The partial charges on the fluorine and carbon are attractive, contributing to the unusual bond strength of the carbon–fluorine bond. According to this same reason, with decreasing the Electronegativity (EN) from F to I, the C-X bond become weaker..
Report
Share
Report
Share
Download to read offline
Recommended
Discuss the chemistry of halogens- group 17- with specific reference t.docx
Discuss the chemistry of halogens, group 17, with specific reference to the reactivity of fluorine. Why does IF 7 exist while ICl 7 doesn’t?
Solution
The elements of group 17 of the periodic table are known as halogens. The members of the halogen family are F (fluorine), Cl (chlorine), Br (bromine), I (iodine) and As (astatine). The following general characteristics apply to the members of the halogen family.
a) F and Cl are gases while Br is a liquid and I is a soft solid at room temperature. As is radioactive and much chemistry about As is yet to be explored.
b) All the members of the halogen family are non-metals. This means that the elements have high electronegativity and electron affinity values. The halogens have high ionization energies. All the halogens form ionic salts with metals. Halogens combine with non-metals to form polar covalent bonds and the bond dipole is directed toward the halogen atom in the bond.
c) F is the most electronegative element in the group. Infact, F is the most electronegative element in the entire periodic table. The electronegativity of F is so high that it is impossible to oxidize F. On the contrary, F is always reduced to form F - .
d) F is the smallest element in the periodic table. Due to small size of F, F has a slightly lower electron affinity than Cl. It is known that electron affinity is the energy released when an electron is added to an neutral gaseous atom. Due to the small size of F, the addition of the extra electron leads to electron-electron repulsions and hence, F has lower electron affinity than Cl.
e) F has the highest ionization energy in the group. Infact, the ionization energy of F is so high that it is impossible to remove an electron from F to form F + .
f) Due to the small size and high electronegativity of F, F is the only halogen element that can exhibit hydrogen bonding.
IF 7 exisits but ICl 7 does not. This can ascribed to the high electronegativity of F. The F atom is more electronegative than Cl. It is due to the high electronegativity of F atom that F can easily polarize I atom to form IF 7 . Cl is more electronegative than I; however, the electronegativity difference is not significant enough to polarize the I atom to form ICl 7 .
.
GROUP 17 p-BLOCK. PART-1 with audio.pptx
Halogens are highly reactive non-metals. These elements greatly resemble each other in their properties. Group 17 elements are collectively called halogens (In Greek: halo means salt and genes mean producing, so collectively salt producing) and it consists of fluorine, chlorine, bromine, iodine, and astatine.
The similarity to this extent is not found in other groups of the periodic table. They have a regular gradation in the physical and chemical properties. Astatine is the only radioactive element in the group. They have seven electrons in their outermost shell (ns2np5) and are short of one electron from the configuration of the nearest noble gas. The chemical properties and reactivity of an element are determined by the oxidation state exhibited by them.
All the elements of the halogen family exhibit -1 oxidation state. However, elements such as chlorine, bromine, and iodine also show +1, +3, +5 and +7 states.
This higher oxidation state of chlorine, bromine, and iodine is realised when these halogens are in combination with small and highly electronegative atoms of fluorine and oxygen.
The oxides and oxoacids of chlorine and bromine have +4 and +6 states. There are no valence shells d orbitals in the fluorine atom and therefore it cannot expand its octet.
Fluorine being the most electronegative element exhibits only -1 oxidation state.
The elements that are present in group 17 are fluorine, chlorine, bromine, iodine, and astatine. They are called halogens as they react with metals to produce salts. Halogens are nonmetals with high reactivity. These elements are grouped together as they have similar properties. Group 17 elements, fluorine, chlorine, bromine, iodine, and astatine, are collectively known as halogens (in Greek, halo means salt, and genes mean generating, thus collectively salt-producing).
Inorganic Chemistry 5th Edition Miessler Solutions Manual
FUll download : https://alibabadownload.com/product/inorganic-chemistry-5th-edition-miessler-solutions-manual/ Inorganic Chemistry 5th Edition Miessler Solutions Manual
Lanthanide and actinide chemistry, inorganic chemistry. inner transistion ser...
lanthenides and actinides series are explained in this slide
Recommended
Discuss the chemistry of halogens- group 17- with specific reference t.docx
Discuss the chemistry of halogens, group 17, with specific reference to the reactivity of fluorine. Why does IF 7 exist while ICl 7 doesn’t?
Solution
The elements of group 17 of the periodic table are known as halogens. The members of the halogen family are F (fluorine), Cl (chlorine), Br (bromine), I (iodine) and As (astatine). The following general characteristics apply to the members of the halogen family.
a) F and Cl are gases while Br is a liquid and I is a soft solid at room temperature. As is radioactive and much chemistry about As is yet to be explored.
b) All the members of the halogen family are non-metals. This means that the elements have high electronegativity and electron affinity values. The halogens have high ionization energies. All the halogens form ionic salts with metals. Halogens combine with non-metals to form polar covalent bonds and the bond dipole is directed toward the halogen atom in the bond.
c) F is the most electronegative element in the group. Infact, F is the most electronegative element in the entire periodic table. The electronegativity of F is so high that it is impossible to oxidize F. On the contrary, F is always reduced to form F - .
d) F is the smallest element in the periodic table. Due to small size of F, F has a slightly lower electron affinity than Cl. It is known that electron affinity is the energy released when an electron is added to an neutral gaseous atom. Due to the small size of F, the addition of the extra electron leads to electron-electron repulsions and hence, F has lower electron affinity than Cl.
e) F has the highest ionization energy in the group. Infact, the ionization energy of F is so high that it is impossible to remove an electron from F to form F + .
f) Due to the small size and high electronegativity of F, F is the only halogen element that can exhibit hydrogen bonding.
IF 7 exisits but ICl 7 does not. This can ascribed to the high electronegativity of F. The F atom is more electronegative than Cl. It is due to the high electronegativity of F atom that F can easily polarize I atom to form IF 7 . Cl is more electronegative than I; however, the electronegativity difference is not significant enough to polarize the I atom to form ICl 7 .
.
GROUP 17 p-BLOCK. PART-1 with audio.pptx
Halogens are highly reactive non-metals. These elements greatly resemble each other in their properties. Group 17 elements are collectively called halogens (In Greek: halo means salt and genes mean producing, so collectively salt producing) and it consists of fluorine, chlorine, bromine, iodine, and astatine.
The similarity to this extent is not found in other groups of the periodic table. They have a regular gradation in the physical and chemical properties. Astatine is the only radioactive element in the group. They have seven electrons in their outermost shell (ns2np5) and are short of one electron from the configuration of the nearest noble gas. The chemical properties and reactivity of an element are determined by the oxidation state exhibited by them.
All the elements of the halogen family exhibit -1 oxidation state. However, elements such as chlorine, bromine, and iodine also show +1, +3, +5 and +7 states.
This higher oxidation state of chlorine, bromine, and iodine is realised when these halogens are in combination with small and highly electronegative atoms of fluorine and oxygen.
The oxides and oxoacids of chlorine and bromine have +4 and +6 states. There are no valence shells d orbitals in the fluorine atom and therefore it cannot expand its octet.
Fluorine being the most electronegative element exhibits only -1 oxidation state.
The elements that are present in group 17 are fluorine, chlorine, bromine, iodine, and astatine. They are called halogens as they react with metals to produce salts. Halogens are nonmetals with high reactivity. These elements are grouped together as they have similar properties. Group 17 elements, fluorine, chlorine, bromine, iodine, and astatine, are collectively known as halogens (in Greek, halo means salt, and genes mean generating, thus collectively salt-producing).
Inorganic Chemistry 5th Edition Miessler Solutions Manual
FUll download : https://alibabadownload.com/product/inorganic-chemistry-5th-edition-miessler-solutions-manual/ Inorganic Chemistry 5th Edition Miessler Solutions Manual
Lanthanide and actinide chemistry, inorganic chemistry. inner transistion ser...
lanthenides and actinides series are explained in this slide
effect of nucleophile on substitution reaction|organic chemistry
its videos are also available on the youtube channel Chemistry Philics if you want to understand it clearly then check out my youtube channel Chemistry philics
f- block elements
f-block elements, general properties of lanthanoids and actinoids, lanthanoid contraction, uses of lanthanoids and actinoids,
dandfblock-151025055616-lva1-app6891.pdf
The description of the d and f block and the properties and their reactions
Carbon and It’s Compounds.pptx
elemental Carbons and Its Chemistry, compounds containing carbon. allotropes of carbon, bonding and configuration in carbon atom.
1. Translation program#includestdio.h#includeconio.h#incl.pdf
1. Translation program:
#include
#include
#include
#include
#include
int x1,y1,x2,y2,x3,y3,mx,my;
void draw();
void tri();
void main()
{
int gd=DETECT,gm;
int c;
initgraph(&gd,&gm,\"d:\\\\tc\\\\bgi \");
printf(\"Enter the 1st point for the triangle:\");
scanf(\"%d%d\",&x1,&y1);
printf(\"Enter the 2nd point for the triangle:\");
scanf(\"%d%d\",&x2,&y2);
printf(\"Enter the 3rd point for the triangle:\");
scanf(\"%d%d\",&x3,&y3);
cleardevice();
draw();
getch();
tri();
getch();
}
void draw()
{
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
}
void tri()
{
int x,y,a1,a2,a3,b1,b2,b3;
printf(\"Enter the Transaction coordinates\");
scanf(\"%d%d\",&x,&y);
cleardevice();
a1=x1+x;
b1=y1+y;
a2=x2+x;
b2=y2+y;
a3=x3+x;
b3=y3+y;
line(a1,b1,a2,b2);
line(a2,b2,a3,b3);
line(a3,b3,a1,b1);
}
getch();
closegraph();
2.
//rotation
#include
#include
#include
#include
#include
#include
float x1,y1,x2,y2,x,y,x3,y3,x4,y4,a;
int ch;
int main(void)
{
int gdriver = DETECT, gmode, errorcode;
clrscr();
initgraph(&gdriver, &gmode, \"c:\\\\tc\\\\bgi\");
cout<<\"enter coordinates of line1:\ \";
cin>>x1>>y1>>x2>>y2;
cout<<\"enter coordinates for relative line:\ \";
cin>>x3>>y3;
cout<<\"enter the angle of rotation:\ \";cin>>a;
cleardevice();
line(x1,y1,x2,y2);
moveto(x2,y2);
lineto(x3,y3);
moveto(x3,y3);
lineto(x1,y1);
a=a*(3.14/180);
x1=(x1*cos(a))-(y1*sin(a));
y1=(x1*sin(a))+(y1*cos(a));
x2=(x2*cos(a))-(y2*sin(a));
y2=(x2*sin(a))+(y2*cos(a));
x3=(x3*cos(a))-(y3*sin(a));
y3=(x3*sin(a))+(y3*cos(a));
cout<<\"now hit a key to see rotation:\";
getch();
moveto(x1,y1);
lineto(x2,y2);
moveto(x2,y2);
lineto(x3,y3);
moveto(x3,y3);
lineto(x1,y1);
getch();
closegraph();
}
3. Reflection
#include
#include
#include
#include
void main()
{
int gd=DETECT,gm;
int x1,y1,x2,y2,x3,y3;
char a;
clrscr();
initgraph(&gd,&gm,\"\");
printf(\"\ enter the coordinates of triangle\");
sacnf(\"%d%d%d%d%d%d\",&x1,&y1,&x2,&y2,&x3,&y3);
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
line(320,0,320,430);
line(0,240,640,240);
printf(\"\ enter the axis of reflection\");
scanf(\"%d\",&a);
if(a=\'x\'||a=\'X\')
{
x1=x1;
x2=x2;
x3=x3;
y1=y1+240;
y2=y2+240;
y3=y3+240;
}
else
if(a=\'y\'||a=\'Y\')
{
y1=y1;
y2=y2;
y3=y3;
x1+=320;
x2+=320;
x3+=320;
}
printf(\"\ triangle after reflection\");
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
getch();
closegraph();
}
Solution
1. Translation program:
#include
#include
#include
#include
#include
int x1,y1,x2,y2,x3,y3,mx,my;
void draw();
void tri();
void main()
{
int gd=DETECT,gm;
int c;
initgraph(&gd,&gm,\"d:\\\\tc\\\\bgi \");
printf(\"Enter the 1st point for the triangle:\");
scanf(\"%d%d\",&x1,&y1);
printf(\"Enter the 2nd point for the triangle:\");
scanf(\"%d%d\",&x2,&y2);
printf(\"Enter the 3rd point for the triangle:\");
scanf(\"%d%d\",&x3,&y3);
cleardevice();
draw();
getch();
tri();
getch();
}
void draw()
{
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
}
void tri()
{
int x,y,a1,a2,a3,b1,b2,b3;
printf(\"Enter the Transaction coordinates\.
1A. The acronym DBLC is used to name the Database Life Cycle.The DBL.pdf
1A. The acronym DBLC is used to name the Database Life Cycle.The DBLC traces the history
of the databse system from its starting point to its obsolescence.The DBLC is composed of six
phases:initial study,design,inplementation and loading,testing and evaluation,operation and
maintenence and evolution.
2A.Centralized conceptual database design consists of typical simple databases and conducted by
single person or small team.
Decentralized conceptual database design consists of large number of entities and complex
relations and spread across multiple sites and developed by multiple teams.
Aggregation process requires designer to create single model in which various aggregation
problems must be addressed like synonyms and homonyms,entity and subtypes.
3A.The minimal data rule specifies that all the data defined in the data model are actually
required to fit to present and expected tuture data requirements.
4A.Top-down design by identifying the differnet entity types and definition to each entity
attributes. in other words top down design starts by defining the required data sets and defines
the data elements for each of those data sets.
Bottom up design first defiines the required attributes and theb groups the attributes to form
entities.
Refer the below diagram for third answer
Solution
1A. The acronym DBLC is used to name the Database Life Cycle.The DBLC traces the history
of the databse system from its starting point to its obsolescence.The DBLC is composed of six
phases:initial study,design,inplementation and loading,testing and evaluation,operation and
maintenence and evolution.
2A.Centralized conceptual database design consists of typical simple databases and conducted by
single person or small team.
Decentralized conceptual database design consists of large number of entities and complex
relations and spread across multiple sites and developed by multiple teams.
Aggregation process requires designer to create single model in which various aggregation
problems must be addressed like synonyms and homonyms,entity and subtypes.
3A.The minimal data rule specifies that all the data defined in the data model are actually
required to fit to present and expected tuture data requirements.
4A.Top-down design by identifying the differnet entity types and definition to each entity
attributes. in other words top down design starts by defining the required data sets and defines
the data elements for each of those data sets.
Bottom up design first defiines the required attributes and theb groups the attributes to form
entities.
Refer the below diagram for third answer.
More Related Content
Similar to A is correct! The high electronegativity of fluor.pdf
effect of nucleophile on substitution reaction|organic chemistry
its videos are also available on the youtube channel Chemistry Philics if you want to understand it clearly then check out my youtube channel Chemistry philics
f- block elements
f-block elements, general properties of lanthanoids and actinoids, lanthanoid contraction, uses of lanthanoids and actinoids,
dandfblock-151025055616-lva1-app6891.pdf
The description of the d and f block and the properties and their reactions
Carbon and It’s Compounds.pptx
elemental Carbons and Its Chemistry, compounds containing carbon. allotropes of carbon, bonding and configuration in carbon atom.
Similar to A is correct! The high electronegativity of fluor.pdf (20)
effect of nucleophile on substitution reaction|organic chemistry
effect of nucleophile on substitution reaction|organic chemistry
More from sutharbharat59
1. Translation program#includestdio.h#includeconio.h#incl.pdf
1. Translation program:
#include
#include
#include
#include
#include
int x1,y1,x2,y2,x3,y3,mx,my;
void draw();
void tri();
void main()
{
int gd=DETECT,gm;
int c;
initgraph(&gd,&gm,\"d:\\\\tc\\\\bgi \");
printf(\"Enter the 1st point for the triangle:\");
scanf(\"%d%d\",&x1,&y1);
printf(\"Enter the 2nd point for the triangle:\");
scanf(\"%d%d\",&x2,&y2);
printf(\"Enter the 3rd point for the triangle:\");
scanf(\"%d%d\",&x3,&y3);
cleardevice();
draw();
getch();
tri();
getch();
}
void draw()
{
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
}
void tri()
{
int x,y,a1,a2,a3,b1,b2,b3;
printf(\"Enter the Transaction coordinates\");
scanf(\"%d%d\",&x,&y);
cleardevice();
a1=x1+x;
b1=y1+y;
a2=x2+x;
b2=y2+y;
a3=x3+x;
b3=y3+y;
line(a1,b1,a2,b2);
line(a2,b2,a3,b3);
line(a3,b3,a1,b1);
}
getch();
closegraph();
2.
//rotation
#include
#include
#include
#include
#include
#include
float x1,y1,x2,y2,x,y,x3,y3,x4,y4,a;
int ch;
int main(void)
{
int gdriver = DETECT, gmode, errorcode;
clrscr();
initgraph(&gdriver, &gmode, \"c:\\\\tc\\\\bgi\");
cout<<\"enter coordinates of line1:\ \";
cin>>x1>>y1>>x2>>y2;
cout<<\"enter coordinates for relative line:\ \";
cin>>x3>>y3;
cout<<\"enter the angle of rotation:\ \";cin>>a;
cleardevice();
line(x1,y1,x2,y2);
moveto(x2,y2);
lineto(x3,y3);
moveto(x3,y3);
lineto(x1,y1);
a=a*(3.14/180);
x1=(x1*cos(a))-(y1*sin(a));
y1=(x1*sin(a))+(y1*cos(a));
x2=(x2*cos(a))-(y2*sin(a));
y2=(x2*sin(a))+(y2*cos(a));
x3=(x3*cos(a))-(y3*sin(a));
y3=(x3*sin(a))+(y3*cos(a));
cout<<\"now hit a key to see rotation:\";
getch();
moveto(x1,y1);
lineto(x2,y2);
moveto(x2,y2);
lineto(x3,y3);
moveto(x3,y3);
lineto(x1,y1);
getch();
closegraph();
}
3. Reflection
#include
#include
#include
#include
void main()
{
int gd=DETECT,gm;
int x1,y1,x2,y2,x3,y3;
char a;
clrscr();
initgraph(&gd,&gm,\"\");
printf(\"\ enter the coordinates of triangle\");
sacnf(\"%d%d%d%d%d%d\",&x1,&y1,&x2,&y2,&x3,&y3);
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
line(320,0,320,430);
line(0,240,640,240);
printf(\"\ enter the axis of reflection\");
scanf(\"%d\",&a);
if(a=\'x\'||a=\'X\')
{
x1=x1;
x2=x2;
x3=x3;
y1=y1+240;
y2=y2+240;
y3=y3+240;
}
else
if(a=\'y\'||a=\'Y\')
{
y1=y1;
y2=y2;
y3=y3;
x1+=320;
x2+=320;
x3+=320;
}
printf(\"\ triangle after reflection\");
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
getch();
closegraph();
}
Solution
1. Translation program:
#include
#include
#include
#include
#include
int x1,y1,x2,y2,x3,y3,mx,my;
void draw();
void tri();
void main()
{
int gd=DETECT,gm;
int c;
initgraph(&gd,&gm,\"d:\\\\tc\\\\bgi \");
printf(\"Enter the 1st point for the triangle:\");
scanf(\"%d%d\",&x1,&y1);
printf(\"Enter the 2nd point for the triangle:\");
scanf(\"%d%d\",&x2,&y2);
printf(\"Enter the 3rd point for the triangle:\");
scanf(\"%d%d\",&x3,&y3);
cleardevice();
draw();
getch();
tri();
getch();
}
void draw()
{
line(x1,y1,x2,y2);
line(x2,y2,x3,y3);
line(x3,y3,x1,y1);
}
void tri()
{
int x,y,a1,a2,a3,b1,b2,b3;
printf(\"Enter the Transaction coordinates\.
1A. The acronym DBLC is used to name the Database Life Cycle.The DBL.pdf
1A. The acronym DBLC is used to name the Database Life Cycle.The DBLC traces the history
of the databse system from its starting point to its obsolescence.The DBLC is composed of six
phases:initial study,design,inplementation and loading,testing and evaluation,operation and
maintenence and evolution.
2A.Centralized conceptual database design consists of typical simple databases and conducted by
single person or small team.
Decentralized conceptual database design consists of large number of entities and complex
relations and spread across multiple sites and developed by multiple teams.
Aggregation process requires designer to create single model in which various aggregation
problems must be addressed like synonyms and homonyms,entity and subtypes.
3A.The minimal data rule specifies that all the data defined in the data model are actually
required to fit to present and expected tuture data requirements.
4A.Top-down design by identifying the differnet entity types and definition to each entity
attributes. in other words top down design starts by defining the required data sets and defines
the data elements for each of those data sets.
Bottom up design first defiines the required attributes and theb groups the attributes to form
entities.
Refer the below diagram for third answer
Solution
1A. The acronym DBLC is used to name the Database Life Cycle.The DBLC traces the history
of the databse system from its starting point to its obsolescence.The DBLC is composed of six
phases:initial study,design,inplementation and loading,testing and evaluation,operation and
maintenence and evolution.
2A.Centralized conceptual database design consists of typical simple databases and conducted by
single person or small team.
Decentralized conceptual database design consists of large number of entities and complex
relations and spread across multiple sites and developed by multiple teams.
Aggregation process requires designer to create single model in which various aggregation
problems must be addressed like synonyms and homonyms,entity and subtypes.
3A.The minimal data rule specifies that all the data defined in the data model are actually
required to fit to present and expected tuture data requirements.
4A.Top-down design by identifying the differnet entity types and definition to each entity
attributes. in other words top down design starts by defining the required data sets and defines
the data elements for each of those data sets.
Bottom up design first defiines the required attributes and theb groups the attributes to form
entities.
Refer the below diagram for third answer.
In chemistry, hybridisation (or hybridization) is.pdf
In chemistry, hybridisation (or hybridization) is the concept of mixing atomic
orbitals to form new hybrid orbitals suitable for the qualitative description of atomic bonding
properties. Hybridised orbitals are very useful in the explanation of the shape of molecular
orbitals for molecules. It is an integral part of valence bond theory. Although sometimes taught
together with the valence shell electron-pair repulsion (VSEPR) theory, valence bond and
hybridization are in fact not related to the VSEPR model.[1] Contents [hide] 1 Historical
development 2 Types of hybridisation 2.1 sp3 hybrids 2.2 sp2 hybrids 2.3 sp hybrids 3
Hybridisation and molecule shape 3.1 Explanation of the shape of water 3.2 Controversy
regarding d-orbital participation 4 Hybridisation theory vs. MO theory 5 See also 6 External
links 7 References [edit]Historical development Chemist Linus Pauling first developed the
hybridisation theory in order to explain the structure of molecules such as methane (CH4).[2]
This concept was developed for such simple chemical systems, but the approach was later
applied more widely, and today it is considered an effective heuristic for rationalizing the
structures of organic compounds. For quantitative calculations of electronic structure and
molecular properties, hybridisation theory is not as practical as molecular orbital theory.
Problems with hybridisation are especially notable when the d orbitals are involved in bonding,
as in coordination chemistry and organometallic chemistry. Although hybridisation schemes in
transition metal chemistry can be used, they are not generally as accurate. Orbitals are a model
representation of the behaviour of electrons within molecules. In the case of simple
hybridisation, this approximation is based on atomic orbitals, similar to those obtained for the
hydrogen atom, the only atom for which an exact analytic solution to its Schrödinger equation is
known. In heavier atoms, like carbon, nitrogen, and oxygen, the atomic orbitals used are the 2s
and 2p orbitals, similar to excited state orbitals for hydrogen. Hybridised orbitals are assumed to
be mixtures of these atomic orbitals, superimposed on each other in various proportions. The
theory of hybridisation is most applicable under these assumptions. It gives a simple orbital
picture equivalent to Lewis structures. Hybridisation is not required to describe molecules, but
for molecules made up from carbon, nitrogen and oxygen (and to a lesser extent, sulfur and
phosphorus) the hybridisation theory/model makes the description much easier. The
hybridisation theory finds its use mainly in organic chemistry. Its explanation starts with the way
bonding is organized in methane. [edit]Types of hybridisation [edit]sp3 hybrids Hybridisation
describes the bonding atoms from an atom\'s point of view. That is, for a tetrahedrally
coordinated carbon (e.g., methane, CH4), the carbon should have 4 orbitals with the correct
symmetry to bond to the 4 hydrogen atoms. The .
RPS 19 stands for ribosomal protein S19. This proteins is synthesise.pdf
RPS 19 stands for ribosomal protein S19. This proteins is synthesised and located in the cytosol.
It is then transported to the respective destinations. RPS 19 to reach the mitochondria must cross
the 2 mitochondrial membranes the outer and inner membrane.
Solution
RPS 19 stands for ribosomal protein S19. This proteins is synthesised and located in the cytosol.
It is then transported to the respective destinations. RPS 19 to reach the mitochondria must cross
the 2 mitochondrial membranes the outer and inner membrane..
y^(iv)-4y=0taking 4y to RHS we gety^(iv) = 4yy^(iii) = integra.pdf
y^(iv)-4y=0
taking 4y to RHS we get
y^(iv) = 4y
y^(iii) = integral of(4y)
=4
y^(ii) = integral of(4)
= 0+ A note:The integral of a constant C with respect to y is Cy+ A
y^(i) = integral of(A)
= 0 +A
y =(intgral of A)
=0+A
So the general solution is y= A(constant).
Solution
y^(iv)-4y=0
taking 4y to RHS we get
y^(iv) = 4y
y^(iii) = integral of(4y)
=4
y^(ii) = integral of(4)
= 0+ A note:The integral of a constant C with respect to y is Cy+ A
y^(i) = integral of(A)
= 0 +A
y =(intgral of A)
=0+A
So the general solution is y= A(constant)..
Fe(s) + Mn2+(aq) Fe2+(aq) + Mn(s)Yes this reaction is spon.pdf
Fe(s) + Mn2+(aq) Fe2+(aq) + Mn(s)
Yes this reaction is spontaneous in the reverse direction
This is because E of the whole rection will be +ve in the reverse direction
We know that if E of the reaction is +ve, the reaction is Spontaneous
Solution
Fe(s) + Mn2+(aq) Fe2+(aq) + Mn(s)
Yes this reaction is spontaneous in the reverse direction
This is because E of the whole rection will be +ve in the reverse direction
We know that if E of the reaction is +ve, the reaction is Spontaneous.
When Na2SO3 is dissolved in water, Na+ and SO32- ions are formedN.pdf
When Na2SO3 is dissolved in water, Na+ and SO32- ions are formed:
Na2SO3 => 2 Na+ + SO32-
The SO32- ions are weak bases and ionize in water to form HSO3- and OH- ions:
SO32- + H2O <=> HSO3- + OH-
Since OH- ions are formed, the pH will be greater than 7 and the solution is basic.
Solution
When Na2SO3 is dissolved in water, Na+ and SO32- ions are formed:
Na2SO3 => 2 Na+ + SO32-
The SO32- ions are weak bases and ionize in water to form HSO3- and OH- ions:
SO32- + H2O <=> HSO3- + OH-
Since OH- ions are formed, the pH will be greater than 7 and the solution is basic..
To convert html code into Java servlet you have to write all html ta.pdf
To convert html code into Java servlet you have to write all html tag within out.println statement.
Out.println() is used to direct execute/print on browser.
# Program
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class Student extends HttpServlet {
@Override
public void doGet(HttpServletRequest request, HttpServletResponse response) throws
IOException, ServletException {
response.setContentType(\"text/html;charset=UTF-8\");
PrintWriter out = response.getWriter();
try {
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"Registration Form\");
out.println(\"Name:\");
out.println(\" \");
out.println(\" Username:\");
out.println(\"\");
out.println(\"Password:\");
out.println(\" \");
out.println(\" Address:\");
out.println(\"\");
out.println(\" Country:\");
out.println(\"\");
out.println(\"please country\");
out.println(\"USA\");
out.println(\"UK\");
out.println(\" \");
out.println(\"ZIP Code:\");
out.println(\"\");
out.println(\" Email:\");
out.println(\" \");
out.println(\" Sex:\");
out.println(\"Male\");
out.println(\" Female\");
out.println(\" Language:\");
out.println(\" English\");
out.println(\" French\");
out.println(\"Germany\");
out.println(\" \");
out.println(\" About: \");
out.println(\" \");
out.println(\" \");
out.println(\" \");
out.println(\"\");
out.println(\" \");
out.println(\" \");
} finally {
out.close();
}
}
}
Solution
To convert html code into Java servlet you have to write all html tag within out.println statement.
Out.println() is used to direct execute/print on browser.
# Program
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class Student extends HttpServlet {
@Override
public void doGet(HttpServletRequest request, HttpServletResponse response) throws
IOException, ServletException {
response.setContentType(\"text/html;charset=UTF-8\");
PrintWriter out = response.getWriter();
try {
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"\");
out.println(\"Registration Form\");
out.println(\"Name:\");
out.println(\" \");
out.println(\" Username:\");
out.println(\"\");
out.println(\"Password:\");
out.println(\" \");
out.println(\" Address:\");
out.println(\"\");
out.println(\" Country:\");
out.println(\"\");
out.println(\"please country\");
out.println(\"USA\");
out.println(\"UK\");
out.println(\" \");
out.println(\"ZIP Code:\");
out.println(\"\");
out.println(\" Email:\");
out.println(\" \");
out.println(\" Sex:\");.
Therapsids is a group of synapsidsAdaptation1.Four limbs extent.pdf
Therapsids is a group of synapsids
Adaptation:
1.Four limbs extent vertically in contrast to crawling limbs
2..Feet were more symmetrical
3.Jaws were more complexed and powerful
4.Frontal incisors canines for tearing.
Hadrocodium
They were primitive mammals
1.Advance features
2.Large brain
3.Advance ear
Prosimian
Group of primates,
primitive mammalians characters is bicornuate uterus
Solution
Therapsids is a group of synapsids
Adaptation:
1.Four limbs extent vertically in contrast to crawling limbs
2..Feet were more symmetrical
3.Jaws were more complexed and powerful
4.Frontal incisors canines for tearing.
Hadrocodium
They were primitive mammals
1.Advance features
2.Large brain
3.Advance ear
Prosimian
Group of primates,
primitive mammalians characters is bicornuate uterus.
They trade away higher fecundity for future reproduction.Being ite.pdf
They trade away higher fecundity for future reproduction.
Being iteroparous, they can produce Offsprings throughout life, but they produce single
Offsprings trading away their fecundity so that they can reproduce throughout.
Solution
They trade away higher fecundity for future reproduction.
Being iteroparous, they can produce Offsprings throughout life, but they produce single
Offsprings trading away their fecundity so that they can reproduce throughout..
The statements that are consistent with facts known about membrane a.pdf
The statements that are consistent with facts known about membrane are
1. Some transport processes use the energy of a second transport process to move species across
membranes.
2. Active transport always employs ATP hydrolysis to provide the energy for the transporter.
Solution
The statements that are consistent with facts known about membrane are
1. Some transport processes use the energy of a second transport process to move species across
membranes.
2. Active transport always employs ATP hydrolysis to provide the energy for the transporter..
The implementation algorithm whose amortized complexity is O (1) to .pdf
The implementation algorithm whose amortized complexity is O (1) to implement queue using
two stacks is given as follows:
Algorithm for Enqueue:
Enqueue(element):
//Push the element in the stack 1.
S1.push(element)
Algorithm for Dequeue:
Dequeue():
//Check the condition that stack 2 is empty or not.
//If it is empty then execute do part otherwise go
//to the else part.
if S2.isEmpty() then
//Execute the while loop till the
//size of stack 1 is greater than 1.
while S1.size() > 1 do
//Pop the element from stack 1 and
// store it in the variable element.
element = S1.pop()
//And push the popped element
// of stack 1 to the stack 2.
S2.push(element)
//Pop the element form stack 1 and
//store it in the variable element.
element = S1.pop()
//Return the element.
return element
//The else part.
else
//Pop the element form stack 2 and
//store it in the variable element.
element = S2.pop()
//Return the element.
return element
Where, S1 and S2 represent stack 1 and stack 2 respectively.
Explanation:
1 + 1 + 1 + … + n
Thus, for the dequeue operation the amortized complexity is O (1).
Solution
The implementation algorithm whose amortized complexity is O (1) to implement queue using
two stacks is given as follows:
Algorithm for Enqueue:
Enqueue(element):
//Push the element in the stack 1.
S1.push(element)
Algorithm for Dequeue:
Dequeue():
//Check the condition that stack 2 is empty or not.
//If it is empty then execute do part otherwise go
//to the else part.
if S2.isEmpty() then
//Execute the while loop till the
//size of stack 1 is greater than 1.
while S1.size() > 1 do
//Pop the element from stack 1 and
// store it in the variable element.
element = S1.pop()
//And push the popped element
// of stack 1 to the stack 2.
S2.push(element)
//Pop the element form stack 1 and
//store it in the variable element.
element = S1.pop()
//Return the element.
return element
//The else part.
else
//Pop the element form stack 2 and
//store it in the variable element.
element = S2.pop()
//Return the element.
return element
Where, S1 and S2 represent stack 1 and stack 2 respectively.
Explanation:
1 + 1 + 1 + … + n
Thus, for the dequeue operation the amortized complexity is O (1)..
The correct matches are as discussed below(a) A (Glycoprotiens ar.pdf
The correct matches are as discussed below:
(a) A (Glycoprotiens are complex proteins found on the outer layer of the plasma membrane and
form the structural component of surface receptors)
(b) A (The outer surface proteins such as glycoproteins can be easily separated from the plasma
membrane by mild treatments of salts)
(c) C (The proteins/biomolecules localized on the inner side of plasma membrane are tightly
bound to it and thus require harsh chemical treatments are required for their separation)
(d) D (A transmembrane protein which spans the whole width of the plasma membrane is
actively involved in transport of ions and materials across it)
(e) B (A ganglioside is a complex biomolecular lipid found on the periphery of the cell whose
branches are embedded in the membrane itself)
(f) D, E (Both, the transmembrane protein and the phospholipid of plasma membrane show flip-
flop action for transport of materials across it. This is owing to the dynamic physical state of the
plasma membrane)
Solution
The correct matches are as discussed below:
(a) A (Glycoprotiens are complex proteins found on the outer layer of the plasma membrane and
form the structural component of surface receptors)
(b) A (The outer surface proteins such as glycoproteins can be easily separated from the plasma
membrane by mild treatments of salts)
(c) C (The proteins/biomolecules localized on the inner side of plasma membrane are tightly
bound to it and thus require harsh chemical treatments are required for their separation)
(d) D (A transmembrane protein which spans the whole width of the plasma membrane is
actively involved in transport of ions and materials across it)
(e) B (A ganglioside is a complex biomolecular lipid found on the periphery of the cell whose
branches are embedded in the membrane itself)
(f) D, E (Both, the transmembrane protein and the phospholipid of plasma membrane show flip-
flop action for transport of materials across it. This is owing to the dynamic physical state of the
plasma membrane).
Step1 Moles of He = 504.0026Step2 Moles of Xe = 50131.29Step3 .pdf
Step1 Moles of He = 50/4.0026
Step2 Moles of Xe = 50/131.29
Step3 Find total moles
Step4 Partial pressure of He=[ Moles of He/Total moles] x750 torr
Step5 Partial pressure of Xe = 750 - partial pressure of He
Solution
Step1 Moles of He = 50/4.0026
Step2 Moles of Xe = 50/131.29
Step3 Find total moles
Step4 Partial pressure of He=[ Moles of He/Total moles] x750 torr
Step5 Partial pressure of Xe = 750 - partial pressure of He.
SKIN SENSORY ORGANThe human skin is the external covering of the .pdf
SKIN :SENSORY ORGAN
The human skin is the external covering of the body. In people, it is the biggest organ of the
integumentary framework. The skin has up to seven layers of ectodermal tissue and watches the
hidden muscles, bones, tendons and inside organs. Human skin is like that of most different
warm blooded creatures. Despite the fact that about all human skin is secured with hair follicles,
it can seem bald. There are two general sorts of skin, bristly and glabrous skin. The descriptive
word cutaneous truly signifies \"of the skin\" . Since it interfaces with the earth, skin assumes an
essential insusceptibility part in securing the body against pathogens[3] and over the top water
loss. Its different capacities are protection, temperature direction, sensation, blend of vitamin D,
and the insurance of vitamin B folates. Extremely harmed skin will attempt to recuperate by
framing scar tissue. This is frequently stained and depigmented. In people, skin pigmentation
shifts among populaces, and skin sort can go from dry to slick. Such skin assortment gives a rich
and various living space for microorganisms that number around 1000 species from 19 phyla,
exhibit on the human skin
Skin has mesodermal cells, pigmentation, for example, melanin gave by melanocytes, which
ingest a portion of the possibly risky bright radiation (UV) in daylight. It additionally contains
DNA repair compounds that switch UV harm, with the end goal that individuals without the
qualities for these chemicals endure high rates of skin malignancy. One shape prevalently
delivered by UV light, threatening melanoma, is especially intrusive, making it spread rapidly,
and can frequently be dangerous. Human skin pigmentation shifts among populaces in a striking
way. This has prompted to the order of people(s) on the premise of skin color. The skin is the
biggest organ in the human body. For the normal grown-up human, the skin has a surface zone of
between 1.5-2.0 square meters (16.1-21.5 sq ft.). The thickness of the skin shifts significantly
over all parts of the body, and amongst men and ladies and the youthful and the old. A case is the
skin on the lower arm which is all things considered 1.3 mm in the male and 1.26 mm in the
female. The normal square inch (6.5 cm²) of skin holds 650 sweat organs, 20 veins, 60,000
melanocytes, and more than 1,000 nerve endings. The normal human skin cell is around 30
micrometers in distance across, yet there are variations. A skin cell more often than not extends
from 25-40 micrometers (squared), contingent upon an assortment of variables. Skin is made out
of three essential layers: the epidermis, the dermis and the hypodermis .Epidermis, \"epi\"
originating from the Greek signifying \"over\" or \"upon\", is the peripheral layer of the skin. It
shapes the waterproof, defensive wrap over the body\'s surface which likewise serves as a
hindrance to disease and is comprised of stratified squamous epithelium with a hidden basal
lamina.
The epiderm.
a) FlaseIn terms of trasing volume it is by far the largest market.pdf
a) Flase
In terms of trasing volume it is by far the largest market in the world
b) True
As home currency weakens, one has to pay more units of home currency to buy one unit of
foreign currency, hence making import costlier
Solution
a) Flase
In terms of trasing volume it is by far the largest market in the world
b) True
As home currency weakens, one has to pay more units of home currency to buy one unit of
foreign currency, hence making import costlier.
tested on EclipseRainfall.javaimpo.pdf
//tested on Eclipse
/*************Rainfall.java*************/
import java.text.DecimalFormat;
import java.util.HashMap;
import java.util.Map;
import java.util.Scanner;
public class RainFall {
/*Data member variable*/
private double monthlyRainFall;
private double monthsRainFall[]=new double[12];
private int month=0;
private double maxRain=0.0;
private int maxrainMonth;
private double minRain=0.0;
private int minRainMonth;
/*creating map for storing month*/
Map monthMap=new HashMap();
Scanner input=new Scanner(System.in);
/*Initializing map with value while default constructor*/
public RainFall(){
monthMap.put(0, \"January\");
monthMap.put(1, \"February\");
monthMap.put(2, \"March\");
monthMap.put(3, \"April\");
monthMap.put(4, \"May\");
monthMap.put(5, \"June\");
monthMap.put(6, \"July\");
monthMap.put(7, \"August\");
monthMap.put(8, \"September\");
monthMap.put(9, \"October\");
monthMap.put(10, \"November\");
monthMap.put(11, \"December\");
}
/*Getting monthlyRainFall*/
public double getMonthlyRainFall() {
return monthlyRainFall;
}
/*Setting monthly rainfall If it is negative then it loops until positive */
public void setMonthlyRainFall(double monthlyRainFall) {
while(monthlyRainFall<0){
System.out.println(\"Please Enter positive value of monthly rainfall\");
monthlyRainFall=input.nextDouble();
}
monthsRainFall[month++]=monthlyRainFall;
}
/*Getting average month rain fall*/
public void averageMonthlyRainFall(){
double totalRainFall=0;
/*first calculate totalRain fall after that divide it total month*/
for(int i=0;imonthsRainFall[i]){
minRain=monthsRainFall[i];
minRainMonth=i;
}
}
System.out.println(\"Min Rain Month Fall: \"+monthMap.get(minRainMonth));
}
/*Main method start*/
public static void main(String[] args) {
Scanner sc=new Scanner(System.in);
/*Creating instance of rainFall class*/
RainFall rainFall=new RainFall();
/*getting rainfall for each month from user*/
for(int i=0;i<12;i++){
System.out.println(\"Please Enter rainFall for \"+(i+1)+\" Month\");
rainFall.setMonthlyRainFall(sc.nextDouble());
}
/*Average Monthly rainfall*/
rainFall.averageMonthlyRainFall();
/*Total Rain Fall in a year*/
rainFall.totalRainFall();
/*Max rainFall Month*/
rainFall.maxRainFallMonth();
/*Minimum rainFall Month*/
rainFall.minRainFallMonth();
sc.close();
}
}
/***************output************/
Please Enter rainFall for 1 Month
121
Please Enter rainFall for 2 Month
134
Please Enter rainFall for 3 Month
54
Please Enter rainFall for 4 Month
167
Please Enter rainFall for 5 Month
256
Please Enter rainFall for 6 Month
456
Please Enter rainFall for 7 Month
78
Please Enter rainFall for 8 Month
290
Please Enter rainFall for 9 Month
176
Please Enter rainFall for 10 Month
263
Please Enter rainFall for 11 Month
100
Please Enter rainFall for 12 Month
189
Average Monthly Rain Fall: 190.33
Total Rain Fall for the year: 2284
Max Rain Month Fall: June
Min Rain Month Fall: March
Thanks a lot. If you have any doubt. Please let me know
Solution
//tested on Eclipse
/********.
Ques-1Part-a Mitosis it is a somatic cell division in an organi.pdf
Ques-1:
Part-a: Mitosis: it is a somatic cell division in an organism & this division is useful to maintain
body growth
Part-b: Meiosis: it is the reproductive reduction cell division & it is useful to produce gametes for
fertilization finally to generate a mature embryo
Part-c: cytokinesis: It is defined as the process of division of cytoplasm during cell division
either in mitosis or meiosis & this is useful for carrying cell organelles
Part-d: chromosome: it is the hereditary material that carries genomic information for gene
expression & useful for inheritance of parental traits to offspring
Mitosis ---> somatic cell division & produces two identical daughter cells with equal number of
chromosomes (cytokinesis & karyokinesis).
Meiosis ----> a reduction division occurs in reproductive germ cells in which allosomes
determine sex determination finally generates half of the chromosomes in daughter cells
Part-a: Mitosis: it is a somatic cell division in an organism & this division is useful to maintain
body growth
Part-b: Meiosis: it is the reproductive reduction cell division & it is useful to produce gametes for
fertilization finally to generate a mature embryo
Part-c: cytokinesis: It is defined as the process of division of cytoplasm during cell division
either in mitosis or meiosis & this is useful for carrying cell organelles
Part-d: chromosome: it is the hereditary material that carries genomic information for gene
expression & useful for inheritance of parental traits to offspring
Cell plate is absent during animal cell division instead a complete cleavage of the cells during
division can be observed in animal cells. Cell plate formation during cell division observed only
in plants.
Haploid cells (n) are normally produced by reduction division of meiosis from diploid parent
cells (2n). This type of division occurs in germ cells of male and female species. The
chromosomes of the diploid germ cell undergo reduction in meiosis I and generate half of the
chromosomes when compared to parent diploid cell.
Meiosis division in a reproductive cell often results in four haploid cells with only single set of
chromosomes.
Meiosis-I prophase-I In this process double stranded homologous chromosomes line up each
other, and result in forming a tetrad; this is termed as Synapsis.
Terminal chaismata hold the homologous chromosomes together in metaphase I finally these are
going to align on the metaphase plate. Synapsis allows homologous chromosomes to travel to the
center by forming spindle formation through microtubules attaching to the centromeres finally to
the opposite poles of the cell. Later, crossing over takes place to exchanges paternal and maternal
genes to form tetrad where genetic variation occurs. Crossing over takes place to exchange equal
amounts of DNA generates genetic variability in prophase -I of meiosis.
Crossing over occurs in which lined up chromosomal ends exchange genetic information by
switching their places. Crossing over can un.
Proportional tax is a tax where the rate of tax is fixed. It is a pr.pdf
Proportional tax is a tax where the rate of tax is fixed. It is a predetermined fixed percentage of
one’s income if it is an income tax or it is a fixed percentage of the value of the product if it is a
sales tax. It is also called flat tax. It is regressive in application as all the people pay same
amount. Hence the people earning less pay a higher percentage of their income and the people
paying more pay lesser percentage of their income.
Progressive tax is a tax where the rate of taxation increases with the increase in income or value
of products. Usually this is done by applying brackets to the income or value of products. For
example, people with income from 0 to 20000 fall in one bracket and hence the rate of taxation is
the same for the bracket as a whole let’s say 10%. People with income from 20001 to 40000 fall
in another bracket and they have a different rate of taxation let’s say 12%.Progressive tax works
on the logic of “ability to pay”.
Creating value without producing something new is done by exchanging one good or service
with other. This is done by estimating the exchange value of the goods or services to be
exchanged. The quantified worth of one good or service expressed in terms of the worth of
another is known as the exchange value. In the business of foreign exchange, the value of each
currency is expressed in terms of value of another currency to be exchanged. This creates and
exchange value or exchange rate of one currency to another.
A private currency is a currency issued by private organizations. In many countries it is illegal to
issue private paper currencies. Such a system (of private currencies) will create a protection
against inflation. Once an available instrument or arrangement for investment of present, add-
valuing currency could be created, the public would invest in great numbers, because they would
want to relieve themselves of the fear of devaluing money.
Interest would exist in a pure economy if there is a positive time preference. Time preference is
nothing but, the relative valuation placed on a good at an earlier date compared to its valuation at
a later date. Interest is thus explained as the propensity of individuals to discount the future. A
positive time preference is a necessary and sufficient condition for the existence of Interest in
any economy.
Static view is when resources are allocated efficiently at a point in time. An example of static
efficiency would be whether a firm could produce 2million cars a year more cheaply by using
more labor and less capital. Productive and allocative efficiency are static concepts of efficiency,
they can be used to discuss whether more could be produced now if resources were allocated in a
different way. These concepts can be used for instance, to discuss whether industries dominated
by a monopoly producer might produce at lower cost if competition were introduced in the
industry.
Dynamic view is concerned with how resoures are allocated over a period of tim.
POS system is a networked invironment where a main computer linked t.pdf
POS system is a networked invironment where a main computer linked to multiple checkout
terminals.With a POS system:
The Design considerations of POS system:
Thanks
Solution
POS system is a networked invironment where a main computer linked to multiple checkout
terminals.With a POS system:
The Design considerations of POS system:
Thanks.
More from sutharbharat59 (20)
1. Translation program#includestdio.h#includeconio.h#incl.pdf
1. Translation program#includestdio.h#includeconio.h#incl.pdf
1A. The acronym DBLC is used to name the Database Life Cycle.The DBL.pdf
1A. The acronym DBLC is used to name the Database Life Cycle.The DBL.pdf
In chemistry, hybridisation (or hybridization) is.pdf
In chemistry, hybridisation (or hybridization) is.pdf
RPS 19 stands for ribosomal protein S19. This proteins is synthesise.pdf
RPS 19 stands for ribosomal protein S19. This proteins is synthesise.pdf
y^(iv)-4y=0taking 4y to RHS we gety^(iv) = 4yy^(iii) = integra.pdf
y^(iv)-4y=0taking 4y to RHS we gety^(iv) = 4yy^(iii) = integra.pdf
Fe(s) + Mn2+(aq) Fe2+(aq) + Mn(s)Yes this reaction is spon.pdf
Fe(s) + Mn2+(aq) Fe2+(aq) + Mn(s)Yes this reaction is spon.pdf
When Na2SO3 is dissolved in water, Na+ and SO32- ions are formedN.pdf
When Na2SO3 is dissolved in water, Na+ and SO32- ions are formedN.pdf
To convert html code into Java servlet you have to write all html ta.pdf
To convert html code into Java servlet you have to write all html ta.pdf
Therapsids is a group of synapsidsAdaptation1.Four limbs extent.pdf
Therapsids is a group of synapsidsAdaptation1.Four limbs extent.pdf
They trade away higher fecundity for future reproduction.Being ite.pdf
They trade away higher fecundity for future reproduction.Being ite.pdf
The statements that are consistent with facts known about membrane a.pdf
The statements that are consistent with facts known about membrane a.pdf
The implementation algorithm whose amortized complexity is O (1) to .pdf
The implementation algorithm whose amortized complexity is O (1) to .pdf
The correct matches are as discussed below(a) A (Glycoprotiens ar.pdf
The correct matches are as discussed below(a) A (Glycoprotiens ar.pdf
Step1 Moles of He = 504.0026Step2 Moles of Xe = 50131.29Step3 .pdf
Step1 Moles of He = 504.0026Step2 Moles of Xe = 50131.29Step3 .pdf
SKIN SENSORY ORGANThe human skin is the external covering of the .pdf
SKIN SENSORY ORGANThe human skin is the external covering of the .pdf
a) FlaseIn terms of trasing volume it is by far the largest market.pdf
a) FlaseIn terms of trasing volume it is by far the largest market.pdf
Ques-1Part-a Mitosis it is a somatic cell division in an organi.pdf
Ques-1Part-a Mitosis it is a somatic cell division in an organi.pdf
Proportional tax is a tax where the rate of tax is fixed. It is a pr.pdf
Proportional tax is a tax where the rate of tax is fixed. It is a pr.pdf
POS system is a networked invironment where a main computer linked t.pdf
POS system is a networked invironment where a main computer linked t.pdf
Recently uploaded
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Acetabularia Information For Class 9 .docx
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Overview on Edible Vaccine: Pros & Cons with Mechanism
This ppt include the description of the edible vaccine i.e. a new concept over the traditional vaccine administered by injection.
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is prepared for master's students (MIFB & MIBS) UUM. May it be useful to all.Home assignment II on Spectroscopy 2024 Answers.pdf
Answers to Home assignment on UV-Visible spectroscopy: Calculation of wavelength of UV-Visible absorption
Operation Blue Star - Saka Neela Tara
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Palestine last event orientationfvgnh .pptx
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...Nguyen Thanh Tu Collection
https://app.box.com/s/hqnndn05v4q5a4k4jd597rkdbda0fniiSupporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
Honest Reviews of Tim Han LMA Course Program.pptx
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
The Challenger.pdf DNHS Official Publication
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
The Roman Empire A Historical Colossus.pdf
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Instructions for Submissions thorugh G- Classroom.pptx
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
2024.06.01 Introducing a competency framework for languag learning materials ...
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Polish students' mobility in the Czech Republic
Polish students mobility to the Czech Republic within eTwinning project "Medieval adventures with Marco Polo"
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Recently uploaded (20)
Overview on Edible Vaccine: Pros & Cons with Mechanism
Overview on Edible Vaccine: Pros & Cons with Mechanism
Chapter 3 - Islamic Banking Products and Services.pptx
Chapter 3 - Islamic Banking Products and Services.pptx
Home assignment II on Spectroscopy 2024 Answers.pdf
Home assignment II on Spectroscopy 2024 Answers.pdf
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Instructions for Submissions thorugh G- Classroom.pptx
Instructions for Submissions thorugh G- Classroom.pptx
2024.06.01 Introducing a competency framework for languag learning materials ...
2024.06.01 Introducing a competency framework for languag learning materials ...
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
A is correct! The high electronegativity of fluor.pdf
- 1. A is correct! The high electronegativity of fluorine (4.0 for F vs. 2.5 for carbon) gives the carbon–fluorine bond a significant polarity/dipole moment. The electron density is concentrated around the fluorine, leaving the carbon relatively electron poor. This introduces ionic character to the bond through partial charges (Cd+—Fd-). The partial charges on the fluorine and carbon are attractive, contributing to the unusual bond strength of the carbon–fluorine bond. According to this same reason, with decreasing the Electronegativity (EN) from F to I, the C-X bond become weaker. Solution A is correct! The high electronegativity of fluorine (4.0 for F vs. 2.5 for carbon) gives the carbon–fluorine bond a significant polarity/dipole moment. The electron density is concentrated around the fluorine, leaving the carbon relatively electron poor. This introduces ionic character to the bond through partial charges (Cd+—Fd-). The partial charges on the fluorine and carbon are attractive, contributing to the unusual bond strength of the carbon–fluorine bond. According to this same reason, with decreasing the Electronegativity (EN) from F to I, the C-X bond become weaker.