1. DATA SHEET
AOT-03-1550
1550nm Direct Modulation DWDM Optical Transmitter
AOT-03-1550 adopts a high performance 1550nm DFB laser with optional Dense
Wavelength-Division Multiplexing (DWDM). Combined with ACE® patented full
frequency pre-distortion circuit, it features low adiabatic chirp to maximize
signal quality in short and long lengths of fiber, and excellent inherent linearity
to minimize degradation of the broadcast signals caused by QAM channels
AOT-03-1550 supports standard ITU wavelengths. It reduces cable network
architecture fiber needs and lessens equipment requirements in the hub.
Rear Panel (DWDM model)
Specifications
Optical
Main Features Wavelength 1527.99~1562.23nm ITU Wavelength optional
1RU 19-inch rack mounting Optical output power 6~10dBm Single output
Optical return loss ≥45dB
45~870/1000MHz operating
Connector FC/APC or SC/APC Selectable
bandwidth RF
1550nm DFB laser; DWDM Operating bandwidth 45~862/1000MHz
Input power 15~25dBmV In AGC mode
standard ITU wavelengths
Flatness ≤±0.75dB
optional Output impedance 75Ω
RF return loss ≥16dB
AGC and MGC
Typical Link Performance
Sophisticated ATC and optical
CNR ≥51dB 0dBm optical input;
APC circuitries CSO ≤-58dBc 60 PAL-D channels;
CTB ≤-63dBc 10Km fiber
ACE® patented full frequency
Electrical / Environmental / Mechanical
pre-distortion Communication Interface RJ45 and R232
Laser driver level test point on Power supply 150~265V AC
Power consumption ≤20W
front panel
Operational temperature -20~+50℃
AGC/MGC and modulation Storage temperature -40~+65℃ 95% non-condensing
Dimension 483x44x370mm Width x Height x Depth
control with keys on panel
Specifications are subject to change without notice
RJ45 network interface