Individual part (substructure) of a 3rt semester project of Architectural Technology and Construction Management course; Islands Brygge Terraced Houses, showing process of developing each key junctions and construction of the substructure part.
Thalassemia is a hereditary blood disorder characterized by reduced or absent globin chains that results in anemia. There are two main types - alpha and beta thalassemia. Diagnosis involves blood tests showing microcytic hypochromic anemia. Management includes regular blood transfusions to prevent severe anemia along with iron chelation therapy to remove excess iron from multiple transfusions which can cause organ damage. Other treatments include splenectomy and bone marrow transplantation which can potentially cure thalassemia. Lifelong monitoring and care is required for complications. Population screening and genetic counseling are important for prevention.
Sickle cell disease is a genetic blood disorder caused by a mutation in the beta-globin gene. This mutation causes red blood cells to take on a rigid, sickle shape which can cause episodes of pain and organ damage. The disease manifestations can range from asymptomatic to potentially lethal. Common clinical features include painful vaso-occlusive crises affecting the bones and organs, acute chest syndrome, splenic sequestration, and chronic organ damage to tissues like the lungs, kidneys, and eyes. The inheritance of sickle cell disease and its variants depends on whether a person inherits one or two copies of the sickle beta-globin gene.
The document provides a summary of a procurement and contract management specialist with over 23 years of experience. Some key points include:
- Experience managing procurement and contracts for oil, gas, and other industries in various countries.
- Specializes in procurement for large EPC projects in oil, gas, and petrochemical industries.
- Held roles such as Head of Procurement and Contracts and Deputy General Manager of Procurement and Contracts for companies in South Korea, UAE, and India.
- Responsibilities included managing procurement teams, evaluating bids, negotiating contracts, and ensuring projects were delivered on time and on budget.
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATIONMaypray Guimbarda
I ‘am Certified Coating Inspector for SSPC Level 2 of PCI - Protective Coating Inspector American Standards Equivalent of NACE 2, CSWIP-BGAS 2 and FROSIO 3, and have Experience for all Insulation Works Likes: Cryogenic Insulation Cold Box Equipment, Tank for Polyurethane Foam Insulation of Double Walls, Tank Insulation External Wall and Thermal Insulation for Piping and Mechanical Equipment"
This document provides information and resources for evaluating the job performance of an F&B cost controller, including:
- Links to free ebooks and resources on performance appraisal phrases, forms, methods, and KPI examples.
- A sample multi-page job performance evaluation form for an F&B cost controller, covering areas like administrative skills, decision-making, expense management, and continuous improvement.
- Examples of positive and negative performance review phrases for an F&B cost controller's attitude, creativity, decision-making, interpersonal skills, problem-solving, and teamwork.
- An overview of the top 12 methods for evaluating an F&B cost controller's performance, such as management
1. Microcytic anemia can be identified by a low MCV on a CBC, small RBCs on a blood smear, or an increased RDW. The most common causes are iron deficiency anemia and thalassemia.
2. Iron deficiency anemia is usually caused by inadequate dietary iron intake or increased needs. It often affects young children, women, and pregnant women. Ferritin levels below 15 ng/mL indicate iron deficiency.
3. Thalassemia involves a genetic defect in hemoglobin production and is more common in those of Mediterranean, Southeast Asian, and African descent. Beta-thalassemia trait causes mild anemia while alpha-thalassemia trait
Corrosion and corrosion inhibition of copper alloys in acid mediummohammed rida
This document discusses corrosion inhibition of copper alloys in acid medium. It begins with an introduction to copper and its alloys, and how alloy composition affects corrosion resistance. Various inorganic and organic corrosion inhibitors for copper are then examined, including chromates, molybdates, benzotriazole, thiazoles, and others. The document finds that organic compounds generally provide better corrosion inhibition than inorganic ones, acting through adsorption and film formation on the metal surface. Higher inhibition efficiency is achieved by many nitrogen-/sulfur-containing heterocyclic compounds. The most effective inhibitors depend on factors like pH and acidity of the medium.
Thalassemia is a hereditary blood disorder characterized by reduced or absent globin chains that results in anemia. There are two main types - alpha and beta thalassemia. Diagnosis involves blood tests showing microcytic hypochromic anemia. Management includes regular blood transfusions to prevent severe anemia along with iron chelation therapy to remove excess iron from multiple transfusions which can cause organ damage. Other treatments include splenectomy and bone marrow transplantation which can potentially cure thalassemia. Lifelong monitoring and care is required for complications. Population screening and genetic counseling are important for prevention.
Sickle cell disease is a genetic blood disorder caused by a mutation in the beta-globin gene. This mutation causes red blood cells to take on a rigid, sickle shape which can cause episodes of pain and organ damage. The disease manifestations can range from asymptomatic to potentially lethal. Common clinical features include painful vaso-occlusive crises affecting the bones and organs, acute chest syndrome, splenic sequestration, and chronic organ damage to tissues like the lungs, kidneys, and eyes. The inheritance of sickle cell disease and its variants depends on whether a person inherits one or two copies of the sickle beta-globin gene.
The document provides a summary of a procurement and contract management specialist with over 23 years of experience. Some key points include:
- Experience managing procurement and contracts for oil, gas, and other industries in various countries.
- Specializes in procurement for large EPC projects in oil, gas, and petrochemical industries.
- Held roles such as Head of Procurement and Contracts and Deputy General Manager of Procurement and Contracts for companies in South Korea, UAE, and India.
- Responsibilities included managing procurement teams, evaluating bids, negotiating contracts, and ensuring projects were delivered on time and on budget.
RESUME OF QAQC INSPECTOR COATING/PAINTING AND INSULATIONMaypray Guimbarda
I ‘am Certified Coating Inspector for SSPC Level 2 of PCI - Protective Coating Inspector American Standards Equivalent of NACE 2, CSWIP-BGAS 2 and FROSIO 3, and have Experience for all Insulation Works Likes: Cryogenic Insulation Cold Box Equipment, Tank for Polyurethane Foam Insulation of Double Walls, Tank Insulation External Wall and Thermal Insulation for Piping and Mechanical Equipment"
This document provides information and resources for evaluating the job performance of an F&B cost controller, including:
- Links to free ebooks and resources on performance appraisal phrases, forms, methods, and KPI examples.
- A sample multi-page job performance evaluation form for an F&B cost controller, covering areas like administrative skills, decision-making, expense management, and continuous improvement.
- Examples of positive and negative performance review phrases for an F&B cost controller's attitude, creativity, decision-making, interpersonal skills, problem-solving, and teamwork.
- An overview of the top 12 methods for evaluating an F&B cost controller's performance, such as management
1. Microcytic anemia can be identified by a low MCV on a CBC, small RBCs on a blood smear, or an increased RDW. The most common causes are iron deficiency anemia and thalassemia.
2. Iron deficiency anemia is usually caused by inadequate dietary iron intake or increased needs. It often affects young children, women, and pregnant women. Ferritin levels below 15 ng/mL indicate iron deficiency.
3. Thalassemia involves a genetic defect in hemoglobin production and is more common in those of Mediterranean, Southeast Asian, and African descent. Beta-thalassemia trait causes mild anemia while alpha-thalassemia trait
Corrosion and corrosion inhibition of copper alloys in acid mediummohammed rida
This document discusses corrosion inhibition of copper alloys in acid medium. It begins with an introduction to copper and its alloys, and how alloy composition affects corrosion resistance. Various inorganic and organic corrosion inhibitors for copper are then examined, including chromates, molybdates, benzotriazole, thiazoles, and others. The document finds that organic compounds generally provide better corrosion inhibition than inorganic ones, acting through adsorption and film formation on the metal surface. Higher inhibition efficiency is achieved by many nitrogen-/sulfur-containing heterocyclic compounds. The most effective inhibitors depend on factors like pH and acidity of the medium.
This document provides a summary of an individual's qualifications and experience as a structural and mechanical designer with over 15 years of experience in CAD software such as Solidworks and AutoCAD. Their experience includes projects in offshore oil and gas, marine, diving systems, and more. Their education includes an HNC in 2D and 3D CAD from Stow College in 2000.
This document is the portfolio of Andrea Gino, an Italian architect based in Denmark. It includes brief summaries and photographs of six projects they have worked on:
1. The renovation of the Ministry of Foreign Affairs in Riyadh, where Gino produced drawings for the schematic to detail design phases.
2. The extension of the Annakheel Village Hotel in Jeddah, where Gino produced final drawings for the detail design stage.
3. The éBrick House prototype for Solar Decathlon Europe 2014, where Gino coordinated design between universities and participated in construction.
4. A luxury villa in Silkeborg commissioned by a private client, where Gino designed the
This curriculum vitae summarizes Emma McMullan's skills and experience. She has strong CAD, design, and technical skills. Her experience includes roles managing research and grant programs, developing disability access strategies, and working as an architect assistant producing construction documents. She is proficient in software like AutoCAD, Vectorworks, and Adobe Suite. Her experience also includes project management, report writing, and bid preparation.
Procurement of equipment_packages_at_aker_engineeringPrizztech
This document summarizes a presentation given by Eric Anderson, Procurement Department Manager of Aker Solutions Engineering, about procurement of equipment packages. It discusses Aker Solutions splitting into two companies, Aker Solutions' engineering organization and markets, key projects like Johan Sverdrup and Johan Castberg, the scope of procurement, supplier documentation requirements, qualification and selection of suppliers, standardization efforts, product coordinators, evaluation criteria, and the importance of Arctic competence.
The document provides a monthly progress report for the DAMAC Heights project in Dubai Marina for September 2014. Key accomplishments included continued progress on structure, MEP works, finishes, lifts and facade installation. Key focus issues were mitigating delays in structure, improving MEP and finishes progress, expediting facade and lift works, and addressing health and safety issues. The report included appendices with schedule updates, delay analyses, progress data and other project details.
Lee Raper is a draughtsman seeking new opportunities. He has over 15 years of experience in mechanical, subsea, and structural drafting. Some of his responsibilities include producing deck layouts, storyboards, fabrication drawings, and 3D models using software such as AutoCAD, Inventor, and Vault. He is proficient in mechanical, piping, and structural design for offshore oil and gas projects. Raper has a strong background working with subsea equipment and is willing to relocate for the right position.
The Amal Modular Yard (AMY) cluster in Peniche, Portugal aims to be a modular construction hub for oil and gas projects. It consists of expert partner companies in fabrication, coatings, electrical works, and steel structures that work together in the yard's facilities. The AMY cluster promises technical efficiency, quality control, logistics optimization, and faster project execution for clients through its integrated services and modular approach.
This curriculum vitae outlines Ahmedullah Khan's experience and qualifications. He has over 13 years of experience in power and energy projects, including offshore oil and gas facilities. He currently works as a Mechanical Design Engineer for GEDAC Electric in Saudi Arabia, where he has worked on numerous projects, including power plants, airports, and industrial facilities. His responsibilities include mechanical design, layout, component selection and arrangement, and ensuring designs meet specifications. He also has prior experience in plastic pipe production and an apprenticeship at BHEL related to power plant equipment design.
The Architecture & Construction Agency (ACA) is a private Bulgarian company founded in 1993 that specializes in design of steel and reinforced concrete structures for industrial and civil projects. ACA has extensive experience designing industrial facilities for the cement industry in Bulgaria. They offer full engineering design services including pre-design investigations, drawings, calculations, approvals and construction oversight. ACA has a team of qualified engineers and uses software like ArchiCAD, AutoCAD and SAP2000. They have successfully completed projects for Italcementi Group and Devnya Cement in Bulgaria.
This document provides an overview and update on three Crossrail projects that Laing O'Rourke is working on: C502 at Liverpool Street Station, C422 at Tottenham Court Road Station, and C520 at Custom House Station. It outlines the construction timelines and procurement processes for each project and emphasizes opportunities for suppliers to bid for work through Laing O'Rourke's CompeteFor system.
Km77 hydraulic pump using door handle shape bending (wecompress)1000kv technologies
This document describes a project to design a hydraulic bending machine to bend aluminum or metal sheets into the shape of door handles. The machine would use a hydraulic jack to reduce the force needed for bending. This would allow even laypeople to produce door handles from raw materials. The bending machine would be made from high-quality materials and modern equipment to ensure quality and long-lasting performance for bending steel, aluminum, and other applications. A block diagram shows the input and output of the machine. Features include low cost, easy use, accuracy, and easy maintenance.
Herman Edano is a Filipino civil engineer with over 30 years of experience in structural design and project management roles for oil and gas projects around the world. He has extensive experience using PDMS software to design steel and concrete structures. His resume lists roles with companies such as Cofely Fabricom, IKM, CB&I, ABB, and Fluor, working on projects in Norway, Singapore, Philippines, and other locations. He is currently employed as a Senior Structural PDMS Designer by Cofely Fabricom in Norway.
Herman Edano is a civil engineer from the Philippines with over 30 years of experience in structural design and engineering roles for oil and gas projects. He has extensive experience using PDMS and other 3D modeling software to produce structural designs and drawings. His resume lists numerous roles with major engineering and construction companies where he was responsible for structural design, 3D modeling, producing drawings, and coordinating with other disciplines. He has worked on projects in Norway, Singapore, Philippines, and other locations.
The document provides details on Sitthikorn Pumliab's professional experience as a senior estimating engineer. It outlines his skills, software experience, education, qualifications, languages, and employment history working on various oil, gas, and petrochemical projects. It describes his responsibilities preparing cost estimates for onshore and offshore projects from feasibility through detailed design stages.
Ramy Emad Messeha Gerges is an Egyptian Project Engineer with over 10 years of experience in the oil and gas industry. He has worked on numerous projects in the UAE and Egypt for companies such as Valentine Maritime, Lamprell Energy, and Leighton Off Shore Middle East. His roles have included engineering, construction, installation, and project management. Gerges received a Bachelor's degree in Mechanical Engineering from Ain Shams University in Egypt. He also holds certifications in project management, management skills, and visual welding inspection.
- The Johan Sverdrup project is developing oil and gas resources in the North Sea, led by operator Statoil with partners.
- Major contracts have been awarded to companies for engineering, procurement, and construction of platforms, pipelines, and facilities.
- Many contract packages remain open and will be announced on procurement websites for companies to qualify and bid on. Monitoring contract status is advised for potential suppliers.
- Phase 2 development is in planning and will utilize many options from Phase 1, offering continued opportunities when contracts are awarded after concept selection in late 2015.
David Garver Pedder is a British and Australian civil engineer with over 15 years of experience in structural design, project management, and construction management. He has a Masters degree in Civil and Structural Engineering from Newcastle University and has worked on major infrastructure projects in Australia and the UK. Pedder is proficient in CAD, project management, and structural analysis software and has extensive training in areas such as health and safety, quality management, and construction operations. He is currently pursuing additional education at the Technical University of Berlin.
The document provides a summary of J.SHYAM NIKESH's professional experience and qualifications. It outlines his 5 years of experience in project management, construction management, installation, commissioning, documentation, coordination, and fabrication operations. It also lists his educational qualifications which include a B.E in Mechanical Engineering and details of projects he has worked on in Saudi Arabia and India in various roles like Site Manager and Project Engineer.
Tekla presents the Global BIM Awards 2013 winners and the finalists. Learn more about these impressive projects from this presentation. This year the categories were Total BIM, Cast in place concrete, Engineering, Precast concrete and Steel.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
This document provides a summary of an individual's qualifications and experience as a structural and mechanical designer with over 15 years of experience in CAD software such as Solidworks and AutoCAD. Their experience includes projects in offshore oil and gas, marine, diving systems, and more. Their education includes an HNC in 2D and 3D CAD from Stow College in 2000.
This document is the portfolio of Andrea Gino, an Italian architect based in Denmark. It includes brief summaries and photographs of six projects they have worked on:
1. The renovation of the Ministry of Foreign Affairs in Riyadh, where Gino produced drawings for the schematic to detail design phases.
2. The extension of the Annakheel Village Hotel in Jeddah, where Gino produced final drawings for the detail design stage.
3. The éBrick House prototype for Solar Decathlon Europe 2014, where Gino coordinated design between universities and participated in construction.
4. A luxury villa in Silkeborg commissioned by a private client, where Gino designed the
This curriculum vitae summarizes Emma McMullan's skills and experience. She has strong CAD, design, and technical skills. Her experience includes roles managing research and grant programs, developing disability access strategies, and working as an architect assistant producing construction documents. She is proficient in software like AutoCAD, Vectorworks, and Adobe Suite. Her experience also includes project management, report writing, and bid preparation.
Procurement of equipment_packages_at_aker_engineeringPrizztech
This document summarizes a presentation given by Eric Anderson, Procurement Department Manager of Aker Solutions Engineering, about procurement of equipment packages. It discusses Aker Solutions splitting into two companies, Aker Solutions' engineering organization and markets, key projects like Johan Sverdrup and Johan Castberg, the scope of procurement, supplier documentation requirements, qualification and selection of suppliers, standardization efforts, product coordinators, evaluation criteria, and the importance of Arctic competence.
The document provides a monthly progress report for the DAMAC Heights project in Dubai Marina for September 2014. Key accomplishments included continued progress on structure, MEP works, finishes, lifts and facade installation. Key focus issues were mitigating delays in structure, improving MEP and finishes progress, expediting facade and lift works, and addressing health and safety issues. The report included appendices with schedule updates, delay analyses, progress data and other project details.
Lee Raper is a draughtsman seeking new opportunities. He has over 15 years of experience in mechanical, subsea, and structural drafting. Some of his responsibilities include producing deck layouts, storyboards, fabrication drawings, and 3D models using software such as AutoCAD, Inventor, and Vault. He is proficient in mechanical, piping, and structural design for offshore oil and gas projects. Raper has a strong background working with subsea equipment and is willing to relocate for the right position.
The Amal Modular Yard (AMY) cluster in Peniche, Portugal aims to be a modular construction hub for oil and gas projects. It consists of expert partner companies in fabrication, coatings, electrical works, and steel structures that work together in the yard's facilities. The AMY cluster promises technical efficiency, quality control, logistics optimization, and faster project execution for clients through its integrated services and modular approach.
This curriculum vitae outlines Ahmedullah Khan's experience and qualifications. He has over 13 years of experience in power and energy projects, including offshore oil and gas facilities. He currently works as a Mechanical Design Engineer for GEDAC Electric in Saudi Arabia, where he has worked on numerous projects, including power plants, airports, and industrial facilities. His responsibilities include mechanical design, layout, component selection and arrangement, and ensuring designs meet specifications. He also has prior experience in plastic pipe production and an apprenticeship at BHEL related to power plant equipment design.
The Architecture & Construction Agency (ACA) is a private Bulgarian company founded in 1993 that specializes in design of steel and reinforced concrete structures for industrial and civil projects. ACA has extensive experience designing industrial facilities for the cement industry in Bulgaria. They offer full engineering design services including pre-design investigations, drawings, calculations, approvals and construction oversight. ACA has a team of qualified engineers and uses software like ArchiCAD, AutoCAD and SAP2000. They have successfully completed projects for Italcementi Group and Devnya Cement in Bulgaria.
This document provides an overview and update on three Crossrail projects that Laing O'Rourke is working on: C502 at Liverpool Street Station, C422 at Tottenham Court Road Station, and C520 at Custom House Station. It outlines the construction timelines and procurement processes for each project and emphasizes opportunities for suppliers to bid for work through Laing O'Rourke's CompeteFor system.
Km77 hydraulic pump using door handle shape bending (wecompress)1000kv technologies
This document describes a project to design a hydraulic bending machine to bend aluminum or metal sheets into the shape of door handles. The machine would use a hydraulic jack to reduce the force needed for bending. This would allow even laypeople to produce door handles from raw materials. The bending machine would be made from high-quality materials and modern equipment to ensure quality and long-lasting performance for bending steel, aluminum, and other applications. A block diagram shows the input and output of the machine. Features include low cost, easy use, accuracy, and easy maintenance.
Herman Edano is a Filipino civil engineer with over 30 years of experience in structural design and project management roles for oil and gas projects around the world. He has extensive experience using PDMS software to design steel and concrete structures. His resume lists roles with companies such as Cofely Fabricom, IKM, CB&I, ABB, and Fluor, working on projects in Norway, Singapore, Philippines, and other locations. He is currently employed as a Senior Structural PDMS Designer by Cofely Fabricom in Norway.
Herman Edano is a civil engineer from the Philippines with over 30 years of experience in structural design and engineering roles for oil and gas projects. He has extensive experience using PDMS and other 3D modeling software to produce structural designs and drawings. His resume lists numerous roles with major engineering and construction companies where he was responsible for structural design, 3D modeling, producing drawings, and coordinating with other disciplines. He has worked on projects in Norway, Singapore, Philippines, and other locations.
The document provides details on Sitthikorn Pumliab's professional experience as a senior estimating engineer. It outlines his skills, software experience, education, qualifications, languages, and employment history working on various oil, gas, and petrochemical projects. It describes his responsibilities preparing cost estimates for onshore and offshore projects from feasibility through detailed design stages.
Ramy Emad Messeha Gerges is an Egyptian Project Engineer with over 10 years of experience in the oil and gas industry. He has worked on numerous projects in the UAE and Egypt for companies such as Valentine Maritime, Lamprell Energy, and Leighton Off Shore Middle East. His roles have included engineering, construction, installation, and project management. Gerges received a Bachelor's degree in Mechanical Engineering from Ain Shams University in Egypt. He also holds certifications in project management, management skills, and visual welding inspection.
- The Johan Sverdrup project is developing oil and gas resources in the North Sea, led by operator Statoil with partners.
- Major contracts have been awarded to companies for engineering, procurement, and construction of platforms, pipelines, and facilities.
- Many contract packages remain open and will be announced on procurement websites for companies to qualify and bid on. Monitoring contract status is advised for potential suppliers.
- Phase 2 development is in planning and will utilize many options from Phase 1, offering continued opportunities when contracts are awarded after concept selection in late 2015.
David Garver Pedder is a British and Australian civil engineer with over 15 years of experience in structural design, project management, and construction management. He has a Masters degree in Civil and Structural Engineering from Newcastle University and has worked on major infrastructure projects in Australia and the UK. Pedder is proficient in CAD, project management, and structural analysis software and has extensive training in areas such as health and safety, quality management, and construction operations. He is currently pursuing additional education at the Technical University of Berlin.
The document provides a summary of J.SHYAM NIKESH's professional experience and qualifications. It outlines his 5 years of experience in project management, construction management, installation, commissioning, documentation, coordination, and fabrication operations. It also lists his educational qualifications which include a B.E in Mechanical Engineering and details of projects he has worked on in Saudi Arabia and India in various roles like Site Manager and Project Engineer.
Tekla presents the Global BIM Awards 2013 winners and the finalists. Learn more about these impressive projects from this presentation. This year the categories were Total BIM, Cast in place concrete, Engineering, Precast concrete and Steel.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
How Barcodes Can Be Leveraged Within Odoo 17Celine George
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
How to Manage Reception Report in Odoo 17Celine George
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
2. Personal Pitch
Islands Brygge 2300 Amager
E19_2i_G6 2 of
Matylda Pietrzyk
Architecture Technology and Construction
Management student at KEA
PERSONAL DATA
Polish,
20 years old
STATEMENT
Excited about growing
construction industry and
possibilities provided by
developping BIM technology.
Copernicus
High School
(General)
2015 2018 2019 2022
Copenhagen School of
Design andTechnology
(Bachelor)
EDUCATION
• Organisational skills
• Group work
• Research
SKILLS
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
LANGUAGES
SOFTWARE
2 of 24
3. References
Conclusion
Table of Content
Technical Section
3D drawings
2D details
Iterations
Construction Site
Layout
Foundation Plan
Work Specification
Detail Internal Cost
Detailed Duration
Building Elements Analytical Workbook Main Project Documents Conclusion
Standard
Construction – U-
value calculations
Material Specification
Islands Brygge 2300 Amager
E19_2i_G6
3 ofIntroduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
3 of 24
5. Islandsbrygge 2300 Amager
E19_2i_G6
5 of
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
Technical Section
5 of 24
6. Islandsbrygge 2300 Amager
E19_2i_G6
Sketches and Manufacturers References
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
Leca
Location of the concrete
slab to Leca in floundation
mur-tag
Foundation detail
U-value calculations to find out
how much insulation is needed 6 of 24
7. Islandsbrygge 2300 Amager
E19_2i_G6
Key Junction Foundation
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
7 of 24
17. Main Project Documents
Work Specification Duration & Ressources
Construction Site
Layout & Foundation
Plan
Islands Brygge 2300 Amager
E19_2i_G6 17 of
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
Detailed Internal Cost
17 of 24
18. Islandsbrygge 2300 Amager
E19_2i_G6
Construction Site Layout
18 of 24
• Workshop
• Samples Workshop
• Storage for Fromwork and
Reinforcement bars
• Concrete pump (50m)
• Erection plan
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
20. Islandsbrygge 2300 Amager
E19_2i_G6
Work Specification – In situ concrete
20 of 24
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
• Work Specification is a document distributed to the corresponding
Trade contractors, to complete the work contracted.
SFB number from Sigma
• Based on Standard Specification for our project.
MOLIO
24. Islandsbrygge 2300 Amager
E19_2i_G6
Conclusion
24 of 24
Introduction & Appraisal Outline Proposal Project Proposal Preliminary Project Main Project / Individuals
1st Semester
Window Key Junction
2nd Semester
Full 3D sections
• Good team work
• Learning atmosphere in th class
• More „Structured” learning
• Problem solving
• Revit skills
• Planning skills
• Motivation for future semester