Lee Raper is a draughtsman seeking new opportunities. He has over 15 years of experience in mechanical, subsea, and structural drafting. Some of his responsibilities include producing deck layouts, storyboards, fabrication drawings, and 3D models using software such as AutoCAD, Inventor, and Vault. He is proficient in mechanical, piping, and structural design for offshore oil and gas projects. Raper has a strong background working with subsea equipment and is willing to relocate for the right position.
Design & Development in the Airship IndustryLen Jones
The innovative Airship Design and Manufacture I was responsible for at this time during the 1980s/90s was for the ‘500 & 600’
series Airships; e.g. amongst our successful customers were Fuji Film, Japan and the USA weather surveillance industries. These
Airships were dispatched on many occasions in ‘pack form’ to be assembled ‘on-site’ in the various countries concerned.
Design & Development in the Airship IndustryLen Jones
The innovative Airship Design and Manufacture I was responsible for at this time during the 1980s/90s was for the ‘500 & 600’
series Airships; e.g. amongst our successful customers were Fuji Film, Japan and the USA weather surveillance industries. These
Airships were dispatched on many occasions in ‘pack form’ to be assembled ‘on-site’ in the various countries concerned.
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
I am an AUTODESK Certified professional REVIT 2014, Senior CAD Technician (Plumbing & Fire Fighting), having more than 18 years of experience with various Reputed consultancies and contracting companies and MNCs in India, Singapore, Dubai and Kuwait, drafting design drawings, detailed engineering contracting drawings, as-built drawings for Plumbing and Fire Fighting systems, using AutoCad and Revit softwares for.many industrial projects, high-rise residential & office towers, Schools, Colleges, Multi-purpose complexes, Hotels, Airports, Sub-stations, Plant rooms, etc.
Well versed in AutoCAD & Revit 2014 and MS office.
Specialties: Expertise in design & drafting of Plumbing & Fire Protection systems, preparing equipment layoutS, Piping layoutS, Plant roomS, External Piping layout, Standard details, schematic diagrams, Sections & riser diagrams from Concept stage of the project through Tender stages.
Развитие рынка коммерческой недвижимости в Иркутске. Презентация Байкальского представительства РГУД, Галущенко Т.А., на круглом столе по коммерческой недвижимости, Иркутск, 05.11.2015
Протокол № 16-15ок заседания Комиссии по вопросам градостроительства, землепо...Дарья Каштанова
Протокол № 16-15ок заседания Комиссии по вопросам градостроительства, землепользования и застройки при Правительстве Москвы в Северо-Западном административном округе города Москвы
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
I am an AUTODESK Certified professional REVIT 2014, Senior CAD Technician (Plumbing & Fire Fighting), having more than 18 years of experience with various Reputed consultancies and contracting companies and MNCs in India, Singapore, Dubai and Kuwait, drafting design drawings, detailed engineering contracting drawings, as-built drawings for Plumbing and Fire Fighting systems, using AutoCad and Revit softwares for.many industrial projects, high-rise residential & office towers, Schools, Colleges, Multi-purpose complexes, Hotels, Airports, Sub-stations, Plant rooms, etc.
Well versed in AutoCAD & Revit 2014 and MS office.
Specialties: Expertise in design & drafting of Plumbing & Fire Protection systems, preparing equipment layoutS, Piping layoutS, Plant roomS, External Piping layout, Standard details, schematic diagrams, Sections & riser diagrams from Concept stage of the project through Tender stages.
Развитие рынка коммерческой недвижимости в Иркутске. Презентация Байкальского представительства РГУД, Галущенко Т.А., на круглом столе по коммерческой недвижимости, Иркутск, 05.11.2015
Протокол № 16-15ок заседания Комиссии по вопросам градостроительства, землепо...Дарья Каштанова
Протокол № 16-15ок заседания Комиссии по вопросам градостроительства, землепользования и застройки при Правительстве Москвы в Северо-Западном административном округе города Москвы
Как использовать Rapid SQL для ускорения разработки SQL и другого кода для СУБДAndrew Sovtsov
Темы, рассмотренные на вебинаре:
знакомство с командной разработкой, работой с объектами БД
Как происходит отладка ..SQL
Зачем нужны Favorites и закладки
Как увидеть Explain-plans для запросов
Горячие клавиши, шаблоны, подстановка SQL
Как работает Query Builder
Lead Aircraft Design/Compliance Checker EngineerLen Jones
I am a very experienced Drawing Checker (Geometric Tolerancing and Fit & Function,
to BS 8888 and ISO 9001), Project Engineer/Manager, and Compliance Engineer in the Civil, Defence, and MoD disciplines.
Now available 'immediately' on signing and acceptance of agreed Contract.
CAD Designer seeking to Transfer Broad Based Skill Set, 10+ Years of Engineering experience. As a results-focused, quality-driven professional with experience in project design; managing multiple projects creating drawings, using AutoCAD 2000 to 2013, Catia V5, Microstation 8vi and solidedge and solidworks following established CAD standards, to create Official Plot Plans with utilities, GPS and all assets on base, having a working knowledge of machining processes including tolerances, surfaces finishes, materials and ASTM standards, interpreting design requirements, specializing in industrial and piping systems, over six years, from pumped systems to drains, able to create and edit P & ID, prepare Bill of Material, arrangement of piping systems, creating parts for steam turbines, to creating asbuilt drawings for telecommunication equipment followed by a long history of demonstrating consistent achievement of objectives, and dedication to organizational goals
1. CURRICULUM VITAE
Name: Lee Raper
Address: 27 Blackford Avenue
Rothienorman
Inverurie
Aberdeenshire
Postcode: AB51 8YF
Email: lee_raper@hotmail.co.uk
Date of Birth: 19 March 1988
Occupation: Draughtsman
Tel: 01651 821700
Mob: 07795 022555
PROFILE
I am a draughtsman with a varied background ranging from mechanical to subsea and
structural industries. On a day to day basis I have been tasked with the drawing of
storyboards, deck layouts, diver excursion drawings, lift rigging drawings for oil/gas
platforms, subsea works deployment and installation works, fabrication drawings, machining
and assembly drawings, hydraulic and electrical schematics, and working with P & IDs. The
design packages that I have used include AutoCAD 2015, Autodesk Inventor 2015 and
Autodesk Vauilt systems. I am currently available for an immediate start and I am willing to
relocate/travel for work.
2. EXPERIENCE
Harkand (Integrated Subsea Services)
2012-2015
Draughtsman
In this position my duties include the following;
Producing deck layouts for various vessels and platforms at mobilisation and
demobilisation
Procedural drawings for various campaigns both SAT and AIR diving
Producing storyboards and drawings to show the installation of riser bases, umbilical
risers, subsea umbilicals, small subsea structures and caisson replacements, doing
this with vessel positioning and movements, crane operations with all rigging
required, holdback rigging to subsea DMA or existing structures, diver duties for
securing bolting arrangements whilst including any requirements for ROV works
during all operations
Working with Trainees to adapt and build their skills
Working within a team to provide the best draughting works possible
Producing and modifying field layout drawings with any new or updated details after
and during installation works
Producing diver umbilical excursion drawings within IMCA D010 rules
Setup drawings for various vessels at various platforms and fields keeping in with all
relevant industry standards
Working with design engineers to ensure designs and drawings conform industry
standards
3D modelling and design of vessel updates for example dive bell modifications
including full fabrication drawings using AutoCAD and Autodesk Inventor 2015
Using Autodesk Vault to securely manage all data
KW Ltd
2011-2012
3d Draughtsman
In this position my duties include the following;
Technical design and drafting of subsea equipment
3D modelling and design of full subsea equipment models
3D Concept designs for subsea manifolds
Machining and Fabrication drawings for production of offshore equipment
Working with design engineers to ensure designs conform industry standards
Working with trainees to create and build there knowledge of products regulations
and design codes
Liaise with clients
Using AutoCAD, Autodesk Vault and Autodesk Inventor to design, draw and manage
all drawings and data
3. CPS Aberdeen (Part of Global Energy Group)
2010 - 2011
Structural/Piping Draughtsman
In this position my duties include the following;
Technical design and drafting of offshore equipment
3D modelling and design of full offshore structural equipment and piping models
Machining and Fabrication drawings for production of offshore equipment and piping
Storyboards and installation drawings to show how to install and build platform
stairwells, accommodation upgrades and workshops on offshore platforms showing
rigging to DNV standards.
Working with design engineers to ensure designs conform industry standards
Liaise with clients
Using AutoCAD and Autodesk Inventor to design, draw and manage all drawings and
data
Alfred Cheyne Engineering Ltd (ACE Winches)
2010
Engineering Draughtsman
In this position my duties include the following;
Technical design and drafting of offshore equipment
3D modelling and design of full offshore equipment models
Machining and Fabrication drawings for production of offshore equipment
Sales drawings of offshore equipment for project tender
Weld Matrix and bolt schedule drawings for technical manuals
Sourcing of materials
Liaise with workshop
Liaise with external certified bodies for example DNV and Lloyds
Liaise with clients
Testing of completed equipment
Using AutoCAD, Autodesk Vault and Autodesk Inventor to design, draw and manage
all drawings and data
4. Fisher Offshore (Part of James Fisher PLC)
2009 – 2010
Engineering Draughtsman
In this position my duties include the following;
Technical design and drafting of offshore equipment
3D modelling and design of full offshore equipment models
Machining and Fabrication drawings for production of offshore equipment
Sales drawings of offshore equipment for project tender
Weld Matrix and bolt schedule drawings for technical manuals
Sourcing of materials
Liaise with workshop
Liaise with external certified bodies for example DNV and Lloyds
Produce in house equipment technical manuals
Produce operations manuals
Liaise with clients
Testing of completed equipment
Using AutoCAD and Autodesk Inventor to design, draw and manage all drawings and
data
Alfred Chine Engineering Ltd (ACE Winches)
2005 – 2009
Engineering Draughtsman
In this position my duties include the following;
Technical design and drafting of offshore equipment
3D modelling and design of full offshore equipment models
Machining and Fabrication drawings for production of offshore equipment
Sales drawings of offshore equipment for project tender
Weld Matrix and bolt schedule drawings for technical manuals
Storyboard and installation drawings to show how to fit and secure winches at
various platforms and vessels
Sourcing of materials
Liaise with workshop
Liaise with external certified bodies for example DNV and Lloyds
Produce in house equipment technical manuals
Liaise with clients
Using AutoCAD, Autodesk Vault and Autodesk Inventor to design, draw and manage
all drawings and data
Score Group
2005
Apprentice Mechanical Engineer
Started apprenticeship with the above company and attended Well bank Training Centre.
5. ACHIEVEMENTS
Shell
3D modelling and 2D drawings for the Brent Bypass Pipeline and Subsea manifolds.
Shell
3D modelling and 2D drawings for the Brent Bypass Pipeline and Subsea manifolds.
Apache
Forties Charlie Accommodation and office block upgrade, to include new gym, office
stairwell, north east tower stairwell modifications and fabrication workshop installation
Sigma 3 / Shell
200Te SWL Anchor Mooring Winch
Subsea 7
2 of 250Te Capacity Spooling Winches Complete With Stand Alone Level Wind Unit
Tugger Winch Package this included the following 2 of 20Te SWL Winches, 2 of 10Te SWL
Winches Without Spooling Gear, 3 of 10Te SWL Winches With Spooling Gear
13Te Dive Bell Winch
Technip
200 Te Spooling Winch
15 Te Fast Winch And A-Frame
2 of 10Te Tagging Towers
Sonsub Saipem
2 of Hose Storage Winch Packages
Q Serv
4 of Hose Storage Winches
GMC Produkt
200Te Extendable Spooling Winch
Please note all the achievements noted above have been publicly announced through the
ACE Winches/CPS website.
6. QUALIFICATIONS
Mintlaw Academy
Higher Graphic Communication A
Higher Physical Education B
Higher Chemistry C
Higher English D
Standard Grade Chemistry 1
Standard Grade French 1
Standard Grade Graphic Communication 1
Standard Grade Modern Studies 1
Standard Grade Physical Education 1
Standard Grade English 2
Standard Grade Mathematics 2
Standard Grade Physics 2
Banff and Buchan College
Higher National Units
Information Technology Applications 1
Communication: Presenting Complex Communication for Vocational Purposes
Computer Aided Draughting and Manufacture
Industrial Plant Services: Pnuematics and Hydraulics
Mechanical Engineering Principles: Thermofluids
Mechanical Engineering Principles: Statics and Dynamics
Metrology Dimensional
National Units
Graphical Engineering Communication
Making Moral Decisions
Working With Others
7. Other
Inventor Series 11 Essentials
ANSYS Workbench Simulation Introduction V11
Trained by Envisage LTD in use of Autodesk Inventor 2009, Autodesk Inventor Routed
Systems and AutoCAD 2011 3D
Manual Handling
HOBBIES & INTERESTS
Football, Golf, Free Hand Sketching.
REFERENCES
References and design portfolio are available on request.