Delta Electronics, world's leading manufacturer of EMI filters introduced 6 new EMI Filter Series for 3-phase industrial applications. The EMI filters are suitable for conventional and regenerative motor drives, elevators, cranes, UPS systems, machine tools, robotics, automation machinery, and many more. For more info just look at: www.delta-europe.com

1. Features
> Extremely compact design with convenient mounting styles
> Equipped with “touch safe” terminal blocks
> High attenuation characteristics over a broad frequency spectrum
> Available in very low leakage current
> Current rating coverage up to 180A / 680VAC & UL-approved
> Filters do provide drop-in replace ability against industry standard EMI filters
Applications
> Industrial 3 phase systems
> Conventional and regenerative motor drives, elevators, Cranes,
UPS systems, machine tools, robotics, automation machinery, and many more
Why to choose Delta?
> World class leading manufacturer of EMI filter products – 27 years experience
> Listed on Forbes Asian Fab 50 of most successful companies in Asia
> Owner of countless Vendor-of-the year awards of leading multinationals
> Environmental consciousness in our culture and corporate disciplines
Powerful in We offer to you high grade
> Production capacity > Quality of products and services
> Design support and flexibility > Logistics value added services
> Offering market compliant products > Commercial support
against beneficial conditions > Staff knowing that our success depends on yours
> Rapid turn around time for approval samples
We facilitate your EMI testing & engineering 1
Quality • Reliability • Excellence

2. TDV-1 series
EMI FILTER
Figure
INTRODUCTION
> For three phase systems (Power supplies, UPS, elevators, robots etc.) and
motor drives up to 50m cable length
> Broadband attenuation from 150kHz to 30MHz
> Very Compact and slim design
> Touch safe terminal blocks
> Compliance with class A limits
Dimension
SPECIFICATION
> 3 phase 3 wire system > Filter stage 1 stage
> Voltage rating 480VAC/520VAC* > Terminal block
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
* Option for high voltage 520VAC is available with “HV” suffix
CURRENT DIMENSION MOUNTING LEAKAGE
MODEL RATING LxWxH STYLE CURRENT
[A] [mm] [mA]
07TDVST2-1 7 162x42x72 Terminal block <30
16TDVST2-1 16 222x47x72 Terminal block <30
Schematics
30TDVST2-1 30 242x52x87 Terminal block <30
42TDVST2-1 42 282x52x87 Terminal block <30
55TDVST2-1 55 222x87x92 Terminal block <30
75TDVST2-1 75 202x122x66 Terminal block <30
100TDVST2-1 100 240x90x150 Terminal block <30
130TDVST2-1 130 240x90x150 Terminal block <30
180TDVST2-1 180 350x120x170 Terminal block <30
Insertion loss (common mode) Insertion loss (differential mode)
dB
dB
80
80
55TDVST2-1 55TDVST2-1
70
70 30TDVST2-1
42TDVST2-1 30TDVST2-1
60
60 16TDVST2-1
130TDVST2-1
130TDVST2-1 180TDVST2-1
50 50
42TDVST2-1
40 40 07TDVST2-1
75TDVST2-1
30 16TDVST2-1 30
100TDVST2-1
20 20
07TDVST2-1
75TDVST2-1
10 10 180TDVST2-1
07TDVST2-1 100TDVST2-1
0 0
0.01 0.1 1 10 100 0.01 0.1 1 10 100
frequency (MHz) frequency (MHz)
Specification is subject to change without notice
We facilitate your EMI testing & engineering 2
Quality • Reliability • Excellence

3. EMI FILTER TDRT2-1 series
Figure INTRODUCTION
> For conventional and regenerative motor drives, elevators, cranes, UPS
> High broadband attenuation from 9kHz to 30MHz
> Slim book style
> Touch safe terminal blocks
> Enables compliance with class B limits
SPECIFICATION
> 3 phase 3 wire system > Filter stage 1 stage
Dimension
> Voltage rating 520VAC/480VAC* > Screw type, terminal block
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
* Option for voltage 480VAC is available for 50A and 80A with “A” suffix
CURRENT DIMENSION MOUNTING LEAKAGE
MODEL RATING LxWxH STYLE CURRENT
[A] [mm] [mA]
35TDRT2-1 35 305x60x150 Terminal block <48.9
50TDRT2-1 50 300x80x185 Terminal block <66.1
Schematics 80TDRT2-1 80 350x90x220 Terminal block <71.5
110TDRT2-1 110 350x90x220 Terminal block <71.5
150TDRT2-1 150 400x110x240 Terminal block <71.5
50TDRT2-1-A 50 300x80x185 Terminal block <66.1
80TDRT2-1-A 80 350x90x220 Terminal block <71.4
Insertion loss (common mode) Insertion loss (differential mode)
dB dB
80 80
35TDRT2-1
70 70 110TDRT2-1
80TDRT2-1
60 60
110TDRT2-1
50 50
40
40 50TDRT2-1
50TDRT2-1
30
30
150TDRT2-1
20
20 80TDRT2-1
150TDRT2-1
10
10 36TDRT2-1
0
0
0.01 0.1 1 10 100 1
0.01 0.1 10 100
frequency (MHz) frequency (MHz)
Specification is subject to change without notice
We facilitate your EMI testing & engineering 3
Quality • Reliability • Excellence

4. EMI FILTER TDSS series
Figure
INTRODUCTION
> High-power filter up to 180A for High-power motor drives,
inverters and converters (>180A on request)
> For High-power motor drives, inverters and converters, industrial 3-phase-
systems, installations, large UPS etc.
> Model for 690VAC IT power networks available
> Extremely compact with minimum space requirement
> Compliance with class A limits
SPECIFICATION
> 3 phase 3 wire system > Filter stage 3 stage
> Voltage rating 520VAC/690VAC* > Output connection: Screw type
Dimension
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
* Option for high voltage 690VAC is available with “HV” suffix
CURRENT DIMENSION MOUNTING LEAKAGE
MODEL RATING LxWxH STYLE CURRENT
[A] [mm] [mA]
150TDSS64 150 300x160x120 Screw on <6
180TDSS64 180 300x160x120 Screw on <6
Schematics Insertion loss (common mode) Insertion loss (differential mode)
dB
dB
80
80
70
70
60
60
50
50
40
40
30
30
20
20
180TDRST2
10
10
0
0
0.01 0.1 1 10 100
0.01 0.1 1 10 100
frequency (MHz)
frequency (MHz)
Specification is subject to change without notice
We facilitate your EMI testing & engineering 4
Quality • Reliability • Excellence

5. EMI FILTER TYT8, TYS10 series
Figure
INTRODUCTION
> For general purpose: AC motor drive, machine tools, robot, UPS etc.
> Low leakage current
> Compliant with IEC 60950
> High attenuation of common mode and differential mode
SPECIFICATION
> 3 phase 4 wire system > Filter stage 1 stage
Dimension
> Voltage rating 440/250VAC > Terminal block, screw type
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
CURRENT DIMENSION MOUNTING LEAKAGE
MODEL RATING LxWxH max. STYLE CURRENT
[A] [mm] [mA]
16TYT8 16 142x107x82 Terminal block <0.43
25TYT8 25 142x107x82 Terminal block <0.43
36TYT8 36 142x107x82 Terminal block <0.43
Schematics 50TYT8 50 144x124x104 Terminal block <0.43
100TYT8 100 212x162x132 Terminal block <1.33
150TYS10 150 302x162x132 Screw on <8.0
Max. leakage under normal circumstances. Note: if two phases are interrupted,
worst-case leakage current could reach 6.0 times higher level.
Insertion loss (common mode) Insertion loss (differential mode)
dB dB
70 70
60 60
25TYT8
16TYT8
50 50
25TYT8
16TYT8
40 40 36TYT8
36TYT8
30 30 50TYT8
50TYT8
100TYT8
20
20
150TYS10
150TYS10
10
10
100TYT8
0
0
0.01 0.1 1 10 100
0.01 0.1 1 10 100
frequency (MHz) frequency (MHz)
Specification is subject to change without notice
We facilitate your EMI testing & engineering 5
Quality • Reliability • Excellence

6. EMI FILTER TYT8-1 series
Figure
INTRODUCTION
> For three phase systems (industrial machinery)
> Compact design
> High attenuation
> Very low leakage current
> According to machinery tool standard EN 50370-1
SPECIFICATION
> 3 phase 4 wire system > Filter stage 1 stage
Dimension
> Voltage rating 520/300VAC > Touch safe terminal blocks
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
CURRENT DIMENSION MOUNTING LEAKAGE
MODEL RATING LxWxH STYLE CURRENT
[A] [mm] [mA]
08TYT8-1 8 110x82x70 Terminal block <1
16TYT8-1 16 110x82x70 Terminal block <1
25TYT8-1 25 130x90x85 Terminal block <1
Schematics
36TYT8-1 36 130x90x85 Terminal block <1
64TYT8-1 64 140x115x115 Terminal block <1
80TYT8-1 80 170x135x125 Terminal block <1
120TYT8-1 120 210x140x125 Terminal block <1
160TYT8-1 160 200x160x130 Terminal block <1
Insertion loss (common mode) Insertion loss (differential mode)
dB dB
80
80
120TYT8-1
70
70
120TYT8-1 36TYT8-1
16TYT8-1 60
60
80TYT8-1
08TYT8-1
50
50 36TYT8-1 25TYT8-1
40
40
160TYT8-1 30 16TYT8-1
30
64TYT8-1
64TYT8-1 20
20 80TYT8-1
160TYT8-1
25TYT8-1
10
10
08TYT8-1
0
0
0.01 0.1 1 10 100
0.01 0.1 1 10 100
frequency (MHz)
frequency (MHz)
Specification is subject to change without notice
We facilitate your EMI testing & engineering 6
Quality • Reliability • Excellence

7. EMI FILTER TYT8-2 series
Figure
INTRODUCTION
> For industrial machinery
> Compact design
> Very high attenuation
> Low leakage current
> For machines in mixed/domestic environments (class A/B)
SPECIFICATION
Dimension
> 3 phase 4 wire system > Filter stage 2 stage
> Voltage rating 520/300VAC > Terminal block
> Operating frequency 50/60 Hz > Approvals
> Climatic category 25/100/21 > According EN 60939-2
CURRENT DIMENSION MOUNTING LEAKAGE
MODEL RATING LxWxH STYLE CURRENT
[A] [mm] [mA]
8TYT8-2 8 120x115x80 Terminal block <1
16TYT8-2 16 120x115x80 Terminal block <1
Schematics
25TYT8-2 25 130x125x115 Terminal block <1
36TYT8-2 36 130x125x115 Terminal block <1
64TYT8-2 64 160x125x125 Terminal block <1
80TYT8-2 80 230x135x125 Terminal block <1
120TYT8-2 120 250x140x140 Terminal block <1
160TYT8-2 160 280x140x170 Terminal block <1
Insertion loss (common mode) Insertion loss (differential mode)
dB dB
80
80
08TYT8-2
70
70 25TYT8-2
36TYT8-2
36TYT8-2
25TYT8-2 60
60
50
50 08TYT8-1
64TYT8-2
200TYT8-2
40 80TYT8-2
40
16TYT8-2
120TYT8-2
30
30 120TYT8-2
08TYT8-2
20 160TYT8-2
20 160TYT8-2
80TYT8-2
64TYT8-2 200TYT8-2
10
10
0
0
0.01 0.1 1 10 100
0.01 0.1 1 10 100
frequency (MHz)
frequency (MHz)
Specification is subject to change without notice
We facilitate your EMI testing & engineering 7
Quality • Reliability • Excellence

8. Contact:
EMI Competence Center Soest, Germany
We support you with: Christian Schweder
EMI-Consulting R & D Manager, EMC Solutions
EMI-measurements according Delta Electronics German office:
to EN-standards (EN55011, Coesterweg 45, D-59494 Soest
EN55022, EN 61800-3 etc.) Phone: +49 (0) 2921-987 626
Delta Lab Facility Fax: +49 (0) 2921-987 620
Onsite (200Amp max.) Mobile: +49 (0) 170-7683 096
Email: christian.schweder@delta-es.com
European Headoffice Amsterdam
Rene Winkelman
Business Development & Sales Manager
Delta Electronics European Headquarters:
Zandsteen 15, NL- 2132 MZ Hoofddorp
The Netherlands
Phone: +31(0) 20 655 0921
Fax: +31(0) 20 655 0999
Mobile:+31(0) 65085 9644
Email: rwinkelman@delta-europe.com
Manufacturing plant in Thailand
> ISO 9001 certified
> IS0 14001 certified
> Green partner
> TS 16949 certified
> OHSAS 18001 certified
> CSA22.2 No.8 self-testing accredited
Our Mission
To provide innovative, clean and efficient
Energy solutions for a better tomorrow Quality • Reliability • Excellence
8