The document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, illuminated pushbuttons, selector switches, and key selector switches. Some key details include:
- Emergency stop switches feature a safety lock mechanism, direct opening action, and safe pushbutton design to satisfy safety standards.
- Pushbuttons, pilot lights, and other units have a compact design with space-saving 10mm contact blocks and IP20 finger-safe screw terminals.
- Units are rated for mechanical life of 250,000 operations minimum and electrical life of 100,000 operations minimum.
- Specifications cover operating conditions, degree of protection, insulation/dielectric strength testing, vibration/shock resistance
Catalog đèn báo, nút nhấn, công tắc idec phi 30 mới nhất 2019CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến Quý khách hàng catalog bản đầy đủ và mới nhất về đèn báo nút nhấn (chống cháy) phi 30 dòng EU2B của hãng Idec Izumi.
Đèn báo nút nhấn (dòng chống cháy) của nhà sản xuất Idec được sản xuất theo tiêu chuẩn IP65. Sản phấm có chất liệu bền và khả năng chịu được nhiệt tốt.
Được sử dụng rộng rãi trong các ngành công nghiệp tiềm năng bao gồm dầu khí, xử lý nước thải, hóa dầu và lọc dầu, thiết bị bán dẫn, nông nghiệp, dược phẩm và chế biến thực phẩm.
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
The document provides information on IDEC's ø30mm series switches and pilot lights, including:
- Emergency stop switches and illuminated pushbuttons in various configurations with up to 4 NC contacts. Models have plastic bezels, are pushlock with pull/turn reset, and have IP20 fingersafe terminals.
- Technical specifications for the switches like applicable standards, contact ratings, operating conditions, and certifications.
- Part numbers, configurations, and other details for non-illuminated and illuminated emergency stop switch models.
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng A6CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 16 dòng A6. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC A6 là thích hợp các loạt ứng dụng trong văn phòng và nhà máy. Đèn LED chứa điện trở hạn chế dòng và diode để bảo vệ chống lại kết nối ngược.
This document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, selector switches, and key selector switches. It lists various models with different configurations of buttons, lenses, contacts, and circuits. It also provides detailed dimensional drawings, installation information, ratings, certifications and other technical specifications. The units have compact and rugged designs that meet international safety standards for applications in industrial control panels.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog Timer đầy đủ và chi tiết cấu tạo các dòng timer của nhà sản xuất Idec Izumi đến từ Nhật bản.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Catalog: Nút nhấn phi 16 IDEC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Công ty cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog relay Idec gồm đầy đủ các thông tin cơ bản như: thông số kỹ thuật, kích thước, sơ đồ dây….
Tham khảo các dòng Relay Idec thông dụng tại thị trường Việt Nam: RU4S, RU2S, RY4S, RM2S, RJ1S,….
Thiết kế của Relay Idec tinh tế đến từng chi tiết, sản phẩm luôn đảm bảo độ chính xác và chất lượng. Các ổ cắm dễ dàng sử dụng và có thể gắn trên Din rail, panel hoặc PCB.
Catalog đèn báo, nút nhấn, công tắc idec phi 30 mới nhất 2019CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến Quý khách hàng catalog bản đầy đủ và mới nhất về đèn báo nút nhấn (chống cháy) phi 30 dòng EU2B của hãng Idec Izumi.
Đèn báo nút nhấn (dòng chống cháy) của nhà sản xuất Idec được sản xuất theo tiêu chuẩn IP65. Sản phấm có chất liệu bền và khả năng chịu được nhiệt tốt.
Được sử dụng rộng rãi trong các ngành công nghiệp tiềm năng bao gồm dầu khí, xử lý nước thải, hóa dầu và lọc dầu, thiết bị bán dẫn, nông nghiệp, dược phẩm và chế biến thực phẩm.
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
The document provides information on IDEC's ø30mm series switches and pilot lights, including:
- Emergency stop switches and illuminated pushbuttons in various configurations with up to 4 NC contacts. Models have plastic bezels, are pushlock with pull/turn reset, and have IP20 fingersafe terminals.
- Technical specifications for the switches like applicable standards, contact ratings, operating conditions, and certifications.
- Part numbers, configurations, and other details for non-illuminated and illuminated emergency stop switch models.
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng A6CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 16 dòng A6. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC A6 là thích hợp các loạt ứng dụng trong văn phòng và nhà máy. Đèn LED chứa điện trở hạn chế dòng và diode để bảo vệ chống lại kết nối ngược.
This document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, selector switches, and key selector switches. It lists various models with different configurations of buttons, lenses, contacts, and circuits. It also provides detailed dimensional drawings, installation information, ratings, certifications and other technical specifications. The units have compact and rugged designs that meet international safety standards for applications in industrial control panels.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog Timer đầy đủ và chi tiết cấu tạo các dòng timer của nhà sản xuất Idec Izumi đến từ Nhật bản.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Catalog: Nút nhấn phi 16 IDEC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Công ty cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog relay Idec gồm đầy đủ các thông tin cơ bản như: thông số kỹ thuật, kích thước, sơ đồ dây….
Tham khảo các dòng Relay Idec thông dụng tại thị trường Việt Nam: RU4S, RU2S, RY4S, RM2S, RJ1S,….
Thiết kế của Relay Idec tinh tế đến từng chi tiết, sản phẩm luôn đảm bảo độ chính xác và chất lượng. Các ổ cắm dễ dàng sử dụng và có thể gắn trên Din rail, panel hoặc PCB.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng TWCTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 22 dòng TW. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC phi 22 là có thể dễ dàng chuyển đổi từ phi 22 sang phi 25, điều mà hiếm có sản phẩm nào trên thị trường có thể làm được.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
The document provides a selection guide for SLC30/40 Series Combination Display Lights. It includes:
- Details on the SLC30 and SLC40 models, including available illumination face sizes, colors, voltages, and approvals.
- Configuration information and examples of LED and incandescent illuminated displays.
- Specifications on light sources, illumination options, terminals, and voltages for LED illuminated, transformer, DC-DC converter, and resistor input types.
Catalog Relay Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog đèn báo nút nhấn Fuji Electric Nhật bảnBeeteco
Catalog đèn báo nút nhấn Fuji Electric Nhật bản
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Catalog các loại đèn báo, nút nhấn, công tắc xoay, nút nhấn khẩn IDEC phi 22 -25
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
Catalogue Timer Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog: PLC IDEC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
This document is a product guide from IDEC Corporation that showcases their industrial control and automation products. It provides an overview and pictures of their switches, pilot lights, LED illumination units, programmable controllers, operator interfaces, terminal blocks, circuit protectors, power supplies, photoelectric switches, safety components, and explosion-proof equipment. The guide spans 20 pages and is organized by product type and series with page numbers and pictures provided for each.
The document provides specifications for the SLC30 Series Combination Display Lights. It includes:
- Details on the LED and incandescent light sources, illumination options, voltage ratings, and terminal types.
- Descriptions of the various illumination face shapes including Type F, C, H, L, V, and G.
- Configuration details for the lenses, marking plates, frames, and lamps used for LED illuminated and incandescent illuminated types.
- An example combination of a 15-window display and specifications table comparing the LED illuminated, transformer, DC-DC converter, and resistor input types.
Hao Phuong Company is the distributor of industrial power and automatic products such as: Fuji Electric, Idec Izumi, Togi, Circutor, Nichifu, Takigen, Kansai Automaton,...
www.haophuong.com
This document provides a selection guide for various timer models, including:
- GT3 series multi-function timers with options for OFF delay, star-delta, and twin-timer configurations.
- Multi-mode timers that offer four operation modes in one unit, including ON delay and cycle.
- Miniature GT5 timers and GE1A timers with different time ranges and output configurations.
Technical specifications are given for each model including time ranges, outputs, operating voltages, and standards compliance. A wide variety of timers are available to suit different applications.
Cataloge schneider contactor ct-dienhathe.vnDien Ha The
CT contactors can control heating, ventilation, and other systems. They are available in multiple configurations up to 100A and can be equipped with auxiliary functions like indication and time delay. CT+ contactors provide high performance control for demanding applications with characteristics like low noise, temperature rise, and electromagnetic disturbances. Manually-operated contactors allow overriding automatic control.
Catalog: Contactor Mitubishi Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
This document provides information on residual current monitors (RCMs) and residual current transformers. It summarizes:
1. The RCMs (models IL 5882, SL 5882, IR 5882) have compact designs and can use external or internal residual current transformers. They monitor AC and pulsating DC currents from 10mA to 10A or 30A, and have adjustable time delays, LED indicators, and changeover contacts.
2. Residual current transformers (models ND 5016 and ND 5019) connect to the RCMs and detect insulation faults by measuring current imbalances.
3. The RCMs and transformers provide protection for electrical systems by detecting degradation in insulation before faults occur.
The document provides information on the VARIMETER RCM residual current monitor, including:
1. It has a compact design and can use an external or internal residual current transformer. It detects residual currents according to various standards.
2. It has adjustable tripping values from 10mA to 10A or 30A, a frequency range of 20-2000Hz, and adjustable time delays. It has LED indicators, test and reset buttons, and changeover contacts.
3. It is available in models for mounting in distribution systems or cabinets, with widths of 35mm or 105mm. Models use external or internal residual current transformers.
4. The document provides details on technical specifications, connections, functions,
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng TWCTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 22 dòng TW. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC phi 22 là có thể dễ dàng chuyển đổi từ phi 22 sang phi 25, điều mà hiếm có sản phẩm nào trên thị trường có thể làm được.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
The document provides a selection guide for SLC30/40 Series Combination Display Lights. It includes:
- Details on the SLC30 and SLC40 models, including available illumination face sizes, colors, voltages, and approvals.
- Configuration information and examples of LED and incandescent illuminated displays.
- Specifications on light sources, illumination options, terminals, and voltages for LED illuminated, transformer, DC-DC converter, and resistor input types.
Catalog Relay Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog đèn báo nút nhấn Fuji Electric Nhật bảnBeeteco
Catalog đèn báo nút nhấn Fuji Electric Nhật bản
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Catalog các loại đèn báo, nút nhấn, công tắc xoay, nút nhấn khẩn IDEC phi 22 -25
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
Catalogue Timer Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog: PLC IDEC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
This document is a product guide from IDEC Corporation that showcases their industrial control and automation products. It provides an overview and pictures of their switches, pilot lights, LED illumination units, programmable controllers, operator interfaces, terminal blocks, circuit protectors, power supplies, photoelectric switches, safety components, and explosion-proof equipment. The guide spans 20 pages and is organized by product type and series with page numbers and pictures provided for each.
The document provides specifications for the SLC30 Series Combination Display Lights. It includes:
- Details on the LED and incandescent light sources, illumination options, voltage ratings, and terminal types.
- Descriptions of the various illumination face shapes including Type F, C, H, L, V, and G.
- Configuration details for the lenses, marking plates, frames, and lamps used for LED illuminated and incandescent illuminated types.
- An example combination of a 15-window display and specifications table comparing the LED illuminated, transformer, DC-DC converter, and resistor input types.
Hao Phuong Company is the distributor of industrial power and automatic products such as: Fuji Electric, Idec Izumi, Togi, Circutor, Nichifu, Takigen, Kansai Automaton,...
www.haophuong.com
This document provides a selection guide for various timer models, including:
- GT3 series multi-function timers with options for OFF delay, star-delta, and twin-timer configurations.
- Multi-mode timers that offer four operation modes in one unit, including ON delay and cycle.
- Miniature GT5 timers and GE1A timers with different time ranges and output configurations.
Technical specifications are given for each model including time ranges, outputs, operating voltages, and standards compliance. A wide variety of timers are available to suit different applications.
Cataloge schneider contactor ct-dienhathe.vnDien Ha The
CT contactors can control heating, ventilation, and other systems. They are available in multiple configurations up to 100A and can be equipped with auxiliary functions like indication and time delay. CT+ contactors provide high performance control for demanding applications with characteristics like low noise, temperature rise, and electromagnetic disturbances. Manually-operated contactors allow overriding automatic control.
Catalog: Contactor Mitubishi Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
This document provides information on residual current monitors (RCMs) and residual current transformers. It summarizes:
1. The RCMs (models IL 5882, SL 5882, IR 5882) have compact designs and can use external or internal residual current transformers. They monitor AC and pulsating DC currents from 10mA to 10A or 30A, and have adjustable time delays, LED indicators, and changeover contacts.
2. Residual current transformers (models ND 5016 and ND 5019) connect to the RCMs and detect insulation faults by measuring current imbalances.
3. The RCMs and transformers provide protection for electrical systems by detecting degradation in insulation before faults occur.
The document provides information on the VARIMETER RCM residual current monitor, including:
1. It has a compact design and can use an external or internal residual current transformer. It detects residual currents according to various standards.
2. It has adjustable tripping values from 10mA to 10A or 30A, a frequency range of 20-2000Hz, and adjustable time delays. It has LED indicators, test and reset buttons, and changeover contacts.
3. It is available in models for mounting in distribution systems or cabinets, with widths of 35mm or 105mm. Models use external or internal residual current transformers.
4. The document provides details on technical specifications, connections, functions,
This document is a semiconductor general catalog that provides information on various transistor types including bipolar small-signal transistors, junction FETs, MOSFETs, IGBTs, and phototransistors. It includes specifications for general purpose, low noise, audio, high current, high voltage, and other types of transistors available in leaded, surface mount, and dual packages. Bias resistor built-in transistors are also listed with their internal resistor values and part numbers.
The HarmAtex range consists of explosion proof push buttons, selector switches, and indicator lights for use in hazardous environments. The devices have an IP66 rating and operate between -20°C and +80°C. They include 1-6 contacts and are approved for use in zones 1 and 21 for gas and zones 21 and 22 for dust. The document provides specifications, applications, and part numbers for the various devices.
Catalog thiết bị đóng cắt Fuji Electric - 01 - Contactor
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
The document provides information on Fujielectric's low voltage equipment catalog, including magnetic contactors, starters, thermal overload relays, and solid-state contactors. It summarizes key specifications and features of their SC and SW series contactors and starters, such as long electrical life of 2 million operations, easy addition of optional modules, meeting various international standards, and employing new technologies like their Super Magnet for reliable performance. The document is intended to introduce readers to Fujielectric's low voltage product catalog and provide an overview of their magnetic contactors and starters.
This document provides instructions for an "entry-level" temperature regulator. It includes:
1) Dimensions and connection diagrams for the regulator and its inputs/outputs.
2) Guidelines for installation, including panel mounting and wiring requirements.
3) Descriptions of the temperature sensor inputs (thermocouple, RTD, PTC/NTC) and output types (relays, solid state relays).
4) Information on the power supply, technical specifications, ordering codes, and a configuration procedure for programming parameters.
This document provides information on the VQ5000 series of 5-port solenoid valves including:
1) It describes the various wiring types that have been standardized for the valves and notes that 3 types are available with IP65 enclosures.
2) It provides specifications for the valves such as maximum operating pressure, ambient temperature range, flow characteristics, and response times.
3) It includes diagrams showing the internal wiring, light circuit board installation, and connector attachment/removal.
Contactor ms-n series catalog dienhathe.orgDien Ha The
The document provides an overview of Mitsubishi's magnetic contactors and starters product lineup including:
- General purpose contactors and starters in the MS-N and S-N series for controlling AC motors.
- Definite purpose contactors including for DC applications, medium voltage, compact sizes, and more.
- Associated protection and control devices like thermal overload relays, electronic motor protection relays, and contactor relays.
- Options and accessories for the contactors and starters like coils, contacts, auxiliary contacts, and more.
Magnetic motor starters and magnetic contactors ms n series dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Sony hcd gpx33-gpx55_gpx77_gpx88_ver.1.0 (edita)gacoroma
This document provides troubleshooting and diagnostic procedures for various components of an audio amplifier system. It includes flow charts to diagnose issues with the switching regulator, optical pickup block, D-AMP mount, and MOSFETs. The procedures describe how to check voltages, signals, and components to isolate potential problems in the power supply, laser, motor control, and audio output stages. Replacement of faulty parts is recommended if issues are identified.
CT contactors can be used to control various electrical loads and circuits. They are available in single-pole, two-pole, three-pole and four-pole configurations ranging from 16 to 100 amps. CT contactors can be equipped with auxiliary functions like indication lights, time delays, and mixed impulse/latched control. They provide reliable operation, with a lifetime of over 5 million switching cycles.
The document discusses different types of electro-pneumatic and electro-hydraulic components including solenoid valves, relays, switches, and sensors. Solenoid valves use an electromagnet to actuate a pneumatic valve and control fluid flow. Relays are electromagnetically actuated switches that use a coil to switch contacts. Switches have normally open or closed contacts. Sensors convert physical values into electrical signals and can be contact or non-contact, with examples including limit switches, pressure sensors, and proximity sensors.
Similar to Catalog đèn báo, nút nhấn, công tắc idec dòng YW mới nhất 2019 (20)
Hạo Phương xin giới thiệu đến quý khách hàng cách cài đặt cơ bản dòng biến tần MD290. Biến tần Inovance MD290 là dòng sản phẩm đa năng rất dễ sử dụng và đem lại hiệu quả cho việc điều khiển tốc độ động cơ và các ứng dụng đặc biệt khác. Biến tần Inovance MD290 dùng cho các ứng dụng: điều khiển băng tải, bơm chân không kiểu piston, vận chuyển vật liệu, máy chế biến gỗ,…
Hạo Phương xin giới thiệu đến quý khách hàng cách cài đặt cơ bản dòng biến tần MD290. Biến tần Inovance MD290 là dòng sản phẩm đa năng rất dễ sử dụng và đem lại hiệu quả cho việc điều khiển tốc độ động cơ và các ứng dụng đặc biệt khác. Biến tần Inovance MD290 dùng cho các ứng dụng: điều khiển băng tải, bơm chân không kiểu piston, vận chuyển vật liệu, cắt, máy chế biến gỗ,...
This document announces the discontinuation of several control unit products from IDEC Corporation. It provides details on products being discontinued, their recommended replacements, and last order and delivery dates. Key products being discontinued include LED illuminated white colored products, control units with 6V AC/DC illumination ratings, some emergency stop switches and selector switches, and other low selling items. Replacements or last order dates are provided for most discontinued products.
Những lưu ý khi sử dụng máy lọc nước tại vòi Cleansui CSP601CTY TNHH HẠO PHƯƠNG
Bạn vừa mới mua sản phẩm máy lọc nước tại vòi Cleansui CSP601, và lo lắng không biết sử dụng như thế nào đúng cách. Dưới đây là một số lưu ý mà chúng tôi đưa ra giúp bạn đảm bảo an toàn cũng như là đảm bảo nguồn nước sạch khi sử dụng sản phẩm.
Beeteco xin gửi đến quý khách bảng giá biến tần Inovance mới nhất 2020 bao gồm giá chi tiết của các dòng sản phẩm:
Biến tần Inovance MD200
Biến tần Inovance MD290
Biến tần Inovance MD310
Biến tần Inovance MD500
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Inovance MD500. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
The document is a user guide for the MD310 AC drive from Shenzhen Inovance Technology Co., Ltd. It provides information on product specifications, wiring, setup, troubleshooting, and parameters. The guide covers safety precautions, nameplate details, terminal descriptions, typical wiring diagrams, easy setup instructions, fault solutions, and tables of general and monitoring parameters.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Inovance MD290. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
This document provides product information for MD200 AC drives, including:
- General specifications such as dimensions, voltage classes, power ratings, and carrier frequencies for different models.
- Technical specifications covering control modes, overload capacity, V/F curves, acceleration/deceleration profiles, and DC braking functions.
- Nameplate information including model numbering conventions and certification markings.
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD500 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
Contact:
Trụ sở TP.HCM: Số 139-141 đường Phú Châu, Kp. 1, P. Tam Bình, Q. Thủ Đức, Tp. Hồ Chí Minh
Tel: (028) 3636 5671|2|3 - Fax: (028) 3636 5674
Trụ sở Hà Nội: P502 tầng 5, tòa VP số 15 ngõ 2, Phố Thọ Tháp,P. Dịch Vọng, Q. Cầu Giấy, Hà Nội
Tel: (024) 320 11 408 | 320 11 410
Email: contact@beeteco.com - MST: 3702357207
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD310 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
The document provides instructions for using an AC drive product from Inovance. It includes information about nameplate and model number, components, technical specifications, dimensions, system connections, installation, wiring, operation, maintenance and safety precautions. The document is the user guide for Inovance MD290 series AC drives for power ratings between 500-630 kW.
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD200 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
Biến tần Inovance là dòng sản phẩm đa năng rất dễ sử dụng và đem lại hiệu quả cho việc điều khiển tốc độ động cơ và các ứng dụng đặc biệt khác. Biến tần Inovance MD200 dùng cho các ứng dụng: điều khiển băng tải, bơm chân không kiểu piston, vận chuyển vật liệu, cắt, máy chế biến gỗ,...
Thông tin liên hệ:
Trụ sở TP.HCM: Số 139-141 đường Phú Châu, Kp. 1, P. Tam Bình, Q. Thủ Đức, Tp. Hồ Chí Minh
Tel: (028) 3636 5671|2|3 - Fax: (028) 3636 5674
Trụ sở Hà Nội: P502 tầng 5, tòa VP số 15 ngõ 2, Phố Thọ Tháp, P. Dịch Vọng, Q. Cầu Giấy, Hà Nội
Tel: (024) 320 11 408 | 320 11 410
Email: contact@beeteco.com - MST: 3702357207
Beeteco gửi đến quý khách hàng catalog thiết bị điện của thương hiệu Vteke. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
=========================================
Beeteco.com@ Công ty TNHH Thương Mại Kỹ Thuật ASTER
Hotline: 0909.41.61.43
Email: contact@beeteco.com
Fanpage: www.facebook.com/beeteco
Địa chỉ: 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
The document announces that several HG series operator interface products will be discontinued due to parts no longer being available from suppliers. It provides details on the specific products being discontinued, their recommended replacements, and the schedule including last order and delivery dates. Support for maintenance will be available until late 2026 depending on remaining stock. Customers are advised to place final orders by November 2019 to ensure supply of the discontinued products.
Màn hình cảm ứng dòng V9 là sản phẩm của nhà sản xuất Fuji Electric. Với khả năng giao tiếp mạnh mẽ, đáp ứng được yêu cầu trong tất cả các ngành công nghiệp.
HMI Fuji Electric dòng TS là sản phẩm có khả năng giao tiếp mạnh mẽ, TECHNOSHOT đáp ứng được yêu cầu trong tất cả các ngành công nghiệp. Sản phẩm có giao diện được lập trình một cách trực quan nhất, màn hình với độ sắc nét lên đến 64k màu. Tấm nền TFT cho độ sáng cao và có khả năng tái tạo màu tốt.
The BM3RSB- and BM3RHB- series are 32AF manual motor starters that provide adjustable thermal-magnetic trip protection for motors up to 15kW. They have standard breaking capacities of 25-100kA and compact dimensions. Accessories include auxiliary contact blocks, undervoltage trip devices, and enclosures.
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...ABHILASH DUTTA
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
3. Innovative Design, Space-Saving, Safety,
and Self-Cleaning Contacts
Higher Brightness
Unibody pilot lights achieve high brightness.
Short Depth behind the Panel
Measures only 42mm depth behind the panel.
Four Lens Shapes
Flush, flush with marking, extended, and dome.
Panel Mounting
Unibody pilot lights can be mounted on panels by
tightening the locking ring.
Unibody Pilot Lights
Satisfy International Standards
Safety Lock Mechanism
When the emergency stop signal has been generated during actuation of
the emergency stop device, the emergency stop function shall be
maintained until the emergency stop device is reset (disengaged)
(IEC 60947-5-5, 6.2).
Direct Opening Action
Even if the contacts are welded, NC contacts are forced to open and break
the circuit (compliant to IEC 60947-5-1, Annex K, IEC 60947-5-5, 5.2).
Safe Pushbutton Design
The pushbutton is designed to ensure that an object cannot become
trapped between the mushroom button and the panel, disabling the button
operation. In addition, the pushbutton is designed to prevent removal from
the front of the panel (IEC 60947-5-5, 6.3.2).
Easy Operation
Push-to-lock, Pull/Turn-to-release
YW emergency stop switches can be unlatched by
either pulling or turning the operator.
A variety of operations, key removal
positions, and circuits.
Wide range adds more options to choose from.
Emergency Stop Switches
Key Selector Switches
Unlatching by pulling Unlatching by turning
Plastic Bezel
Non-illuminated Illuminated
Flush
Dome
Extended
Flush
w/marking
Metal Bezel
4. An innovative plastic locking lever is
retained and eliminates the need for a
separate lever lock.
The contact block design reduces the
depth behind the panel.
Metal bezels are available
for pushbuttons, illuminated
pushbuttons, selector
switches, and key selector
switches.
Retained Locking Lever
Lock Unlock
Save
New Contact Block Design
1515
CB
CB
FA
30
1010
30
YW series
10
CB FA CB
CB: Contact block
FA: Full-voltage
adapter
Safety
Integrated Finger-safe
Terminal Cover
Degree of Protection: IP20
(From panel front: IP65)
Save
YW
series
Safety
Reliable
Reliable
Heavy-Duty Rugged Construction
Self-Cleaning Wiping-Action Contacts with
Scored Contact Surfaces
Spring
Movable
Contact
Stationary
Contact
(1) Normal State (2) Wiping (3) Fully Depressed
Scored Surface
5. 4
Contact Ratings (Contact Block)
Rated Insulation Voltage 600V
Rated Thermal Current 10A
Operating Voltage 24V 120V 240V 380V
AC
50/60 Hz
Resistive Load (AC-12) 10A 10A 6A 2A
Inductive Load (AC-15) 10A 6A 3A 1.9A
DC
Resistive Load (DC-12) 8A 2.2A 1.1A –
Inductive Load (DC-13) 4A 1.1A 0.55A –
LED Lamp Ratings
Part No. Rated Voltage Rated Current Color Code
LSED-6➁ 6V AC/DC
10 mA (A, R, Y)
7 mA (G, PW, S)
A: amber
G: green
PW: pure white
R: red
S: blue
Y: yellow
LSED-1➁ 12V AC/DC
14 mA (A, R, Y)
13 mA (G, PW, S)
LSED-2➁ 24V AC/DC
14 mA (A, R,Y)
13 mA (G, PW, S)
LSED-H➁ 110/120V AC/DC 5 mA
LSED-M3➁ 230/240V AC/DC 3 mA
Note: Specify a color code in place of ➁ in the Part No.
Yellow LED lamps are used for white illumination of pilot lights and
illuminated pushbuttons.
Incandescent Lamp Ratings
Part No. Rated Voltage Ratings
LS-T6 6V AC/DC 6.3V 1W
LS-T8 12V AC/DC 18V 1W
LS-T3 24V AC/DC 30V 1W
Unibody Pilot Light Ratings
Rated Voltage Illumination Color Rated Current
6V AC/DC
A, R, W, Y 16 mA
G, PW, S 13 mA
12V AC/DC
A, G, PW,
R, S, W, Y
20 mA
24V AC/DC
100/110V AC
230/240V AC
Mounting Hole Layout
R0.8 max.
0
+0.4
+0.4
0
+0.2
0
ø22.3
3.2
24.1
A B
The 3.2-mm-wide key recess
is necessary when the
anti-rotation ring is used.
Specifications
Operating
Conditions
Operating temperature: –20 to +55°C (no freezing)
Operating humidity: 45 to 85% RH (no condensation)
Storage temperature: –45 to +80°C
Storage humidity: 95% RH maximum
Degree of
Protection
From panel front: IP65 (IEC 60529)
Terminal: IP20 (IEC 60529)
Insulation
Resistance
100 MΩ
Dielectric
Strength
Contact block: 2,500V, 1 minute
Pilot light: 2,000V, 1 minute
Vibration
Resistance
<Emergency stop switch>
Operating extremes / Damage limits:
10 to 500 Hz, amplitude 0.35 mm. acceleration 50 m/s2
(5G)
<Pushbutton, pilot light, illluminated pushbutton, selector
switch, and key selector switch>
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits: 30 Hz, amplitude 1.5 mm
Shock
Resistance
<Emergency stop switch>
Operating extremes: 150 m/s2
(10G)
Damage limits: 1,000 m/s2
(100G)
<Pushbutton, pilot light, illluminated pushbutton, selector
switch, and key selector switch>
Operating extremes: 100 m/s2
(10G)
Damage limits: 1,000 m/s2
(100G)
Mechanical
Life (minimum
operations)
<Emergency stop switch>
250,000 (single contact block)
<Pushbutton and illuminated pushbutton>
Momentary: 5,000,000 (single contact block)
1,000,000 (double contact block)
Maintained: 250,000 (single contact block)
100,000 (double contact block)
<Selector switch and key selector switch>
250,000 (single contact block)
100,000 (double contact block)
Electrical Life
(minimum
operations)
<Emergency stop switch>
100,000 (single contact block)
<Pushbutton, selector switch, and key selector switch>
100,000 (single contact block)
50,000 (double contact block)
YW Series Control Units
Space-saving, 10-mm-thick contact blocks. Removable operator.
Compact and light-weight•
IP20 finger-safe screw terminals (IEC 60529)•
Emergency stop switches feature safety lock mechanism,•
direct opening action, and safe pusbutton design.
Separate contact block makes installation and removal easy.•
Pilot lights feature a large lens for a wide viewing angle.
Matted surfaces on the buttons, lenses, and bezels reduce•
reflection of ambient light.
UL, c-UL listed, EN compliant, and CCC approved.•
UL508, CSA C22.2 No. 14, EN 60947-1, EN 60947-5-1,•
EN 60947-5-5, GB 14048.5
Unit A (mm) B (mm)
Emergency stop switch 50 min. 50 min.
Pushbutton
Selector switch
Key selector switch
50 min. 30 min.
Mushroom pushbutton 50 min. 40 min.
Pilot light (with removable contact block) 30 min.∗ 30 min.
Pilot light (unibody) 50 min. 30 min.
∗ Keep a minimum spacing of 50 mm when using a lamp of over 1W.
(Emergency
Stop Switch)
6. 5
YW Series Emergency Stop Switches ø22
Emergency Stop Switches (Pushlock Pull/Turn Reset)
Package Quantity: 1
Style Contact
Contact Block Mounting Position
Part No. Button Color Code
1 2 3
ø40mm Mushroom 1NC — — NC YW1B-V4E01R
Red only
2NC NC — NC YW1B-V4E02R
3NC NC NC NC YW1B-V4E03R
1NO-1NC NO — NC YW1B-V4E11R
1NO-2NC NO NC NC YW1B-V4E12R
2NO-1NC NO NC NO YW1B-V4E21R
When pressed, the button is locked in the depressed position, and is reset when either pulled or turned clockwise.•
Dimensions
1 2 3
Illuminated Emergency Stop Switches (Pushlock Pull/Turn Reset)
Package Quantity: 1
Style Lamp Contacts
Contact Block
Mounting Position Part No. ➂ Operating
Voltage Code
Lens
Color
Code1 2 3
ø40mm Mushroom
Without
Lamp
1NC — FA NC YW1L-V4E01Q0R
0: without lamp
250V AC/DC max.
Red
only
2NC NC FA NC YW1L-V4E02Q0R
1NO-1NC NO FA NC YW1L-V4E11Q0R
LED
1NC — FA NC YW1L-V4E01Q➂R 2: 6V AC/DC
3: 12V AC/DC
4: 24V AC/DC
H:110/120V AC/DC
M3: 230/240V AC/DC
2NC NC FA NC YW1L-V4E02Q➂R
1NO-1NC NO FA NC YW1L-V4E11Q➂R
Incandescent
1NC — FA NC YW1L-V4E01Q➂R 5: 6V AC/DC
6: 12V AC/DC
7: 24V AC/DC
2NC NC FA NC YW1L-V4E02Q➂R
1NO-1NC NO FA NC YW1L-V4E11Q➂R
Specify an operating voltage code in place of• ➂ in the Part No. FA: Full voltage adapter
When pressed, the button is locked in the depressed position, and is reset when either pulled or turned clockwise.•
Dimensions
1 2 3
28.6
30
ø40
M3.5 Terminal Screw
Contact Block
101010
Panel Thickness 0.8 to 6
32.545.8
Locking Ring Gasket
41.4
28.6
101010
30
ø40
M3.5 Terminal Screw
M3.5 Terminal Screw
Full-Voltage Adapter
Contact Block Locking Ring
Panel Thickness 0.8 to 6
45.8 32.5
Gasket
41.4
Contact Block Mounting Position
Contact Block Mounting Position
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
7. 6
ø22 YW Series Pushbuttons
Pushbuttons with Plastic Bezel
Package Quantity: 1
Shape Operation Contact
Contact Block Mounting Position
Part No.
➀ Button Color
Code1 2 3
Flush
Momentary
1NO NO — — YW1B-M1E10➀
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1NC — — NC YW1B-M1E01➀
2NO NO — NO YW1B-M1E20➀
2NC NC — NC YW1B-M1E02➀
1NO-1NC NO — NC YW1B-M1E11➀
3NO NO NO NO YW1B-M1E30➀
3NC NC NC NC YW1B-M1E03➀
2NO-1NC NO NC NO YW1B-M1E21➀
1NO-2NC NO NC NC YW1B-M1E12➀
Maintained
1NO NO — — YW1B-A1E10➀
1NC — — NC YW1B-A1E01➀
2NO NO — NO YW1B-A1E20➀
2NC NC — NC YW1B-A1E02➀
1NO-1NC NO — NC YW1B-A1E11➀
Extended
Momentary
1NO NO — — YW1B-M2E10➀
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1NC — — NC YW1B-M2E01➀
2NO NO — NO YW1B-M2E20➀
2NC NC — NC YW1B-M2E02➀
1NO-1NC NO — NC YW1B-M2E11➀
Maintained
1NO NO — — YW1B-A2E10➀
1NC — — NC YW1B-A2E01➀
2NO NO — NO YW1B-A2E20➀
2NC NC — NC YW1B-A2E02➀
1NO-1NC NO — NC YW1B-A2E11➀
Mushroom ø40mm
Momentary
1NO NO — — YW1B-M4E10➀
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1NC — — NC YW1B-M4E01➀
2NO NO — NO YW1B-M4E20➀
2NC NC — NC YW1B-M4E02➀
1NO-1NC NO — NC YW1B-M4E11➀
Maintained
1NO NO — — YW1B-A4E10➀
1NC — — NC YW1B-A4E01➀
2NO NO — NO YW1B-A4E20➀
2NC NC — NC YW1B-A4E02➀
1NO-1NC NO — NC YW1B-A4E11➀
Note:Specify a button color code in place of ➀ in the Part No.
Dimensions
All dimensions in mm.
1 2 3
Gasket
Contact Block
M3.5 Terminal Screw
0.5
Panel Thickness: 0.8 to 6
1010
Flush
(ButtonDiameter)
Locking Ring
ø23.6
45.8 11
Lock
ø29
30
28.6
41.4
Extended
(ButtonDiameter)
19
41.4
11
45.8
28.6
30
ø29
ø23.6
Mushroom
(ButtonDiameter)
20.5
41.4
11
45.8
28.6
30
ø40
Contact Block Mounting Position
8. 7
YW Series Pushbuttons ø22
Pushbuttons with Metal Bezel
Package Quantity: 1
Shape Operation Contact
Contact Block Mounting Position
Part No.
➀ Button Color
Code1 2 3
Flush
Momentary
1NO NO — — YW4B-M1E10➀
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1NC — — NC YW4B-M1E01➀
2NO NO — NO YW4B-M1E20➀
2NC NC — NC YW4B-M1E02➀
1NO-1NC NO — NC YW4B-M1E11➀
3NO NO NO NO YW4B-M1E30➀
3NC NC NC NC YW4B-M1E03➀
2NO-1NC NO NC NO YW4B-M1E21➀
1NO-2NC NO NC NC YW4B-M1E12➀
Maintained
1NO NO — — YW4B-A1E10➀
1NC — — NC YW4B-A1E01➀
2NO NO — NO YW4B-A1E20➀
2NC NC — NC YW4B-A1E02➀
1NO-1NC NO — NC YW4B-A1E11➀
Extended
Momentary
1NO NO — — YW4B-M2E10➀
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1NC — — NC YW4B-M2E01➀
2NO NO — NO YW4B-M2E20➀
2NC NC — NC YW4B-M2E02➀
1NO-1NC NO — NC YW4B-M2E11➀
Maintained
1NO NO — — YW4B-A2E10➀
1NC — — NC YW4B-A2E01➀
2NO NO — NO YW4B-A2E20➀
2NC NC — NC YW4B-A2E02➀
1NO-1NC NO — NC YW4B-A2E11➀
Mushroom ø40mm
Momentary
1NO NO — — YW4B-M4E10➀
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1NC — — NC YW4B-M4E01➀
2NO NO — NO YW4B-M4E20➀
2NC NC — NC YW4B-M4E02➀
1NO-1NC NO — NC YW4B-M4E11➀
Maintained
1NO NO — — YW4B-A4E10➀
1NC — — NC YW4B-A4E01➀
2NO NO — NO YW4B-A4E20➀
2NC NC — NC YW4B-A4E02➀
1NO-1NC NO — NC YW4B-A4E11➀
Note:Specify a button color code in place of ➀ in the Part No.
Dimensions
ø40
20.5
11.3
45.8
Locking Ring
Flush
MushroomExtended
41.4
28.6
30
Lock
ø29.5
41.4
28.6
30
Lock
(ButtonDiameter)
(ButtonDiameter)
ø23.6
11.3
45.8 19
Locking Ring
(ButtonDiameter)
ø29.5
41.4
28.6
30
Lock
ø23.6
11.345.8
Locking Ring
29.8
1010
0.3
Contact Block
M3.5 Terminal Screw
Gasket
Panel Thickness: 0.8 to 6
All dimensions in mm.
1 2 3
Contact Block Mounting Position
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
9. 8
ø22 YW Series Pilot Lights
All dimensions in mm.
Pilot Lights (Unibody)
Package Quantity: 1
Shape Lamp Operating Voltage Part No. ➁ Lens Color Code
Flush
Full Voltage
LED
6V AC/DC YW1P-1UQ2➁
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
Y: yellow
12V AC/DC YW1P-1UQ3➁
24V AC/DC YW1P-1UQ4➁
100/110V AC YW1P-1UQH➁
230/240V AC YW1P-1UQM3➁
Flush Marking
Full Voltage
LED
6V AC/DC YW1P-1BUQ2➁
12V AC/DC YW1P-1BUQ3➁
24V AC/DC YW1P-1BUQ4➁
100/110V AC YW1P-1BUQH➁
230/240V AC YW1P-1BUQM3➁
Extended
Full Voltage
LED
6V AC/DC YW1P-2TUQ2➁
12V AC/DC YW1P-2TUQ3➁
24V AC/DC YW1P-2TUQ4➁
100/110V AC YW1P-2TUQH➁
230/240V AC YW1P-2TUQM3➁
Dome
Full Voltage
LED
6V AC/DC YW1P-2UQ2➁
12V AC/DC YW1P-2UQ3➁
24V AC/DC YW1P-2UQ4➁
100/110V AC YW1P-2UQH➁
230/240V AC YW1P-2UQM3➁
Dimensions
Flush
1042.0
ø29.8
Panel Thickness 0.8 to 6
42.0 9.5
ø29.8
Panel Thickness 0.8 to 6
Gasket
Locking Ring
M3.5
Terminal Screw
15.542.0
ø29.8
Dome
Panel Thickness 0.8 to 6
M3.5
Terminal Screw
Locking Ring
Gasket
Extended
15.542.0
ø29.8
Panel Thickness 0.8 to 6
Locking Ring
M3.5
Terminal Screw
Gasket
Flush Marking
M3.5
Terminal Screw
Locking Ring
Gasket
10. 9
YW Series Pilot Lights ø22
Pilot Lights (with Removable Contact Block)
Package Quantity: 1
Shape Lamp Operating Voltage Part No. ➁ Lens Color Code
Flush
Full Voltage Without Lamp 250V AC/DC max. YW1P-1EQ0➁
A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
LED
6V AC/DC YW1P-1EQ2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-➂➁
12V AC/DC YW1P-1EQ3➁
24V AC/DC YW1P-1EQ4➁
110/120V AC/DC YW1P-1EQH➁
230/240V AC/DC YW1P-1EQM3➁
Incandescent
6V AC/DC YW1P-1EQ5➁ A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
Built-in incandescent lamp: LS-T➂
12V AC/DC YW1P-1EQ6➁
24V AC/DC YW1P-1EQ7➁
Flush
Transformer
LED
100/110V AC YW1P-1EH2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-6➁
200/220V AC YW1P-1EM2➁
115/120V AC YW1P-1EH22➁
230/240V AC YW1P-1EM42➁
Incandescent
100/110V AC YW1P-1EH5➁
A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
Built-in incandescent lamp: LS-T6
200/220V AC YW1P-1EM5➁
115/120V AC YW1P-1EH25➁
230/240V AC YW1P-1EM45➁
Flush Marking
Full Voltage
Without Lamp 250V AC/DC max. YW1P-1BEQ0➁
A (amber), G (green), R (red),
S (blue), W (white), Y (yellow)
LED
6V AC/DC YW1P-1BEQ2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-➂➁
12V AC/DC YW1P-1BEQ3➁
24V AC/DC YW1P-1BEQ4➁
110/120V AC/DC YW1P-1BEQH➁
230/240V AC/DC YW1P-1BEQM3➁
Incandescent
6V AC/DC YW1P-1BEQ5➁
A (amber), G (green), R (red),
S (blue), W (white), Y (yellow)
Built-in incandescent lamp: LS-T➂
12V AC/DC YW1P-1BEQ6➁
24V AC/DC YW1P-1BEQ7➁
Flush Marking
Transformer
LED
100/110V AC YW1P-1BEH2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-6➁
200/220V AC YW1P-1BEM2➁
115/120V AC YW1P-1BEH22➁
230/240V AC YW1P-1BEM42➁
Incandescent
100/110V AC YW1P-1BEH5➁
A (amber), G (green), R (red),
S (blue), W (white), Y (yellow)
Built-in incandescent lamp: LS-T6
200/220V AC YW1P-1BEM5➁
115/120V AC YW1P-1BEH25➁
230/240V AC YW1P-1BEM45➁
Note:Specify a lens color code in place of ➁ in the Part No.
Clear lenses are used for PW (pure white) illumination of pilot lights.
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
11. 10
ø22 YW Series Pilot Lights
Shape Lamp Operating Voltage Part No. ➁ Lens Color Code
Extended
Full Voltage Without Lamp 250V AC/DC max. YW1P-2TEQ0➁
A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
LED
6V AC/DC YW1P-2TEQ2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-➂➁
12V AC/DC YW1P-2TEQ3➁
24V AC/DC YW1P-2TEQ4➁
110/120V AC/DC YW1P-2TEQH➁
230/240V AC/DC YW1P-2TEQM3➁
Incandescent
6V AC/DC YW1P-2TEQ5➁ A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
Built-in incandescent lamp: LS-T➂
12V AC/DC YW1P-2TEQ6➁
24V AC/DC YW1P-2TEQ7➁
Extended
Transformer
LED
100/110V AC YW1P-2TEH2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-6➁
200/220V AC YW1P-2TEM2➁
115/120V AC YW1P-2TEH22➁
230/240V AC YW1P-2TEM42➁
Incandescent
100/110V AC YW1P-2TEH5➁
A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
Built-in incandescent lamp: LS-T6
200/220V AC YW1P-2TEM5➁
115/120V AC YW1P-2TEH25➁
230/240V AC YW1P-2TEM45➁
Dome
Full Voltage Without Lamp 250V AC/DC max. YW1P-2EQ0➁
A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
LED
6V AC/DC YW1P-2EQ2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-➂➁
12V AC/DC YW1P-2EQ3➁
24V AC/DC YW1P-2EQ4➁
110/120V AC/DC YW1P-2EQH➁
230/240V AC/DC YW1P-2EQM3➁
Incandescent
6V AC/DC YW1P-2EQ5➁ A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
Built-in incandescent lamp: LS-T➂
12V AC/DC YW1P-2EQ6➁
24V AC/DC YW1P-2EQ7➁
Dome
Transformer
LED
100/110V AC YW1P-2EH2➁
A (amber), G (green),
PW (pure white), R (red),
S (blue), W (white), Y (yellow)
Built-in LED lamp: LSED-6➁
200/220V AC YW1P-2EM2➁
115/120V AC YW1P-2EH22➁
230/240V AC YW1P-2EM42➁
Incandescent
100/110V AC YW1P-2EH5➁
A (amber), C (clear),
G (green), R (red), S (blue),
W (white), Y (yellow)
Built-in incandescent lamp: LS-T6
200/220V AC YW1P-2EM5➁
115/120V AC YW1P-2EH25➁
230/240V AC YW1P-2EM45➁
Note:Specify a lens color code in place of ➁ in the Part No.
Clear lenses are used for PW (pure white) illumination of pilot lights.
12. 11
YW Series Pilot Lights ø22
Dimensions (Pilot Lights with Removable Contact Block)
ø29.8
29.6
24
ø29.8
29.6
24
63.3 9.5
46.2 9.5
Gasket
Locking Ring
M3.5 Terminal Screw
Gasket
Locking Ring
M3.5 Terminal Screw
Panel Thickness 0.8 to 6
Panel Thickness 0.8 to 6
ø29.8
29.6
24
ø29.8
29.6
24
63.3 10
46.2 10
Gasket
Locking Ring
M3.5 Terminal Screw
Gasket
Locking Ring
M3.5 Terminal Screw
Panel Thickness 0.8 to 6
Panel Thickness 0.8 to 6
63.3 15.5
M3.5 Terminal Screw
Panel Thickness 0.8 to 6
Panel Thickness 0.8 to 6
ø29.8
29.6
24
ø29.8
29.6
24
46.2 15.5
Gasket
Locking Ring
Gasket
Locking Ring
M3.5 Terminal Screw
Panel Thickness 0.8 to 6
Panel Thickness 0.8 to 6
63.3 15.5
Gasket
Locking Ring
M3.5 Terminal Screw
ø29.8
29.6
24
46.2 15.5
Gasket
Locking Ring
ø29.8
29.6
24
M3.5 Terminal Screw
Flush
Full Voltage
Transformer
Extended
Full Voltage
Transformer
Flush Marking
Full Voltage
Transformer
Dome
Full Voltage
Transformer
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
13. 12
ø22 YW Series Illuminated Pushbuttons
Illuminated Pushbuttons with Plastic Bezel
Package Quantity: 1
Shape Lamp Operation Contact
Contact Block
Mounting Position Part No.
➂ Operating
Voltage Code
➁ Lens Color
Code
1 2 3
Extended
Without
Lamp
Momentary
1NO NO FA — YW1L-M2E10Q0➁
0: without lamp
250V AC/DC
max.
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
1NC — FA NC YW1L-M2E01Q0➁
2NO NO FA NO YW1L-M2E20Q0➁
2NC NC FA NC YW1L-M2E02Q0➁
1NO-1NC NO FA NC YW1L-M2E11Q0➁
Maintained
1NO NO FA — YW1L-A2E10Q0➁
1NC — FA NC YW1L-A2E01Q0➁
2NO NO FA NO YW1L-A2E20Q0➁
2NC NC FA NC YW1L-A2E02Q0➁
1NO-1NC NO FA NC YW1L-A2E11Q0➁
LED
Momentary
1NO NO FA — YW1L-M2E10Q➂➁
2: 6V AC/DC
3: 12V AC/DC
4: 24V AC/DC
H:110/120V
AC/DC
M3: 230/240V
AC/DC
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
Y: yellow
Built-in LED
lamp:
LSED-➂➁
1NC — FA NC YW1L-M2E01Q➂➁
2NO NO FA NO YW1L-M2E20Q➂➁
2NC NC FA NC YW1L-M2E02Q➂➁
1NO-1NC NO FA NC YW1L-M2E11Q➂➁
Maintained
1NO NO FA — YW1L-A2E10Q➂➁
1NC — FA NC YW1L-A2E01Q➂➁
2NO NO FA NO YW1L-A2E20Q➂➁
2NC NC FA NC YW1L-A2E02Q➂➁
1NO-1NC NO FA NC YW1L-A2E11Q➂➁
Incandes-
cent
Momentary
1NO NO FA — YW1L-M2E10Q➂➁
5: 6V AC/DC
6: 12V AC/DC
7: 24V AC/DC
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
Built-in
incandescent
lamp:
LS-T➂
1NC — FA NC YW1L-M2E01Q➂➁
2NO NO FA NO YW1L-M2E20Q➂➁
2NC NC FA NC YW1L-M2E02Q➂➁
1NO-1NC NO FA NC YW1L-M2E11Q➂➁
Maintained
1NO NO FA — YW1L-A2E10Q➂➁
1NC — FA NC YW1L-A2E01Q➂➁
2NO NO FA NO YW1L-A2E20Q➂➁
2NC NC FA NC YW1L-A2E02Q➂➁
1NO-1NC NO FA NC YW1L-A2E11Q➂➁
Extended with
Full Shroud
Without
Lamp
Momentary
1NO NO FA — YW1L-MF2E10Q0➁
0: without lamp
250V AC/DC
max.
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
1NC — FA NC YW1L-MF2E01Q0➁
2NO NO FA NO YW1L-MF2E20Q0➁
2NC NC FA NC YW1L-MF2E02Q0➁
1NO-1NC NO FA NC YW1L-MF2E11Q0➁
Maintained
1NO NO FA — YW1L-AF2E10Q0➁
1NC — FA NC YW1L-AF2E01Q0➁
2NO NO FA NO YW1L-AF2E20Q0➁
2NC NC FA NC YW1L-AF2E02Q0➁
1NO-1NC NO FA NC YW1L-AF2E11Q0➁
LED
Momentary
1NO NO FA — YW1L-MF2E10Q➂➁
2: 6V AC/DC
3: 12V AC/DC
4: 24V AC/DC
H:110/120V
AC/DC
M3:230/240V
AC/DC
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
Y: yellow
Built-in LED
lamp:
LSED-➂➁
1NC — FA NC YW1L-MF2E01Q➂➁
2NO NO FA NO YW1L-MF2E20Q➂➁
2NC NC FA NC YW1L-MF2E02Q➂➁
1NO-1NC NO FA NC YW1L-MF2E11Q➂➁
Maintained
1NO NO FA — YW1L-AF2E10Q➂➁
1NC — FA NC YW1L-AF2E01Q➂➁
2NO NO FA NO YW1L-AF2E20Q➂➁
2NC NC FA NC YW1L-AF2E02Q➂➁
1NO-1NC NO FA NC YW1L-AF2E11Q➂➁
Incandes-
cent
Momentary
1NO NO FA — YW1L-MF2E10Q➂➁
5: 6V AC/DC
6: 12V AC/DC
7: 24V AC/DC
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
Built-in
incandescent
lamp:
LS-T➂
1NC — FA NC YW1L-MF2E01Q➂➁
2NO NO FA NO YW1L-MF2E20Q➂➁
2NC NC FA NC YW1L-MF2E02Q➂➁
1NO-1NC NO FA NC YW1L-MF2E11Q➂➁
Maintained
1NO NO FA — YW1L-AF2E10Q➂➁
1NC — FA NC YW1L-AF2E01Q➂➁
2NO NO FA NO YW1L-AF2E20Q➂➁
2NC NC FA NC YW1L-AF2E02Q➂➁
1NO-1NC NO FA NC YW1L-AF2E11Q➂➁
Note:Specify a lens color code in place of ➁ in the Part No. FA: Full voltage adapter
Specify an operating voltage code in place of ➂ in the Part No.
14. 13
YW Series Illuminated Pushbuttons ø22
Shape Lamp Operation Contact
Contact Block
Mounting Position Part No.
➂ Operating
Voltage Code
➁ Lens Color
Code
1 2 3
Mushroom ø40mm
Without
Lamp
Momentary
1NO NO FA — YW1L-M4E10Q0➁
0: without lamp
250V AC/DC
max.
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
1NC — FA NC YW1L-M4E01Q0➁
2NO NO FA NO YW1L-M4E20Q0➁
2NC NC FA NC YW1L-M4E02Q0➁
1NO-1NC NO FA NC YW1L-M4E11Q0➁
Maintained
1NO NO FA — YW1L-A4E10Q0➁
1NC — FA NC YW1L-A4E01Q0➁
2NO NO FA NO YW1L-A4E20Q0➁
2NC NC FA NC YW1L-A4E02Q0➁
1NO-1NC NO FA NC YW1L-A4E11Q0➁
LED
Momentary
1NO NO FA — YW1L-M4E10Q➂➁
2: 6V AC/DC
3: 12V AC/DC
4: 24V AC/DC
H:110/120V
AC/DC
M3:230/240V
AC/DC
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
Y: yellow
Built-in LED
lamp:
LSED-➂➁
1NC — FA NC YW1L-M4E01Q➂➁
2NO NO FA NO YW1L-M4E20Q➂➁
2NC NC FA NC YW1L-M4E02Q➂➁
1NO-1NC NO FA NC YW1L-M4E11Q➂➁
Maintained
1NO NO FA — YW1L-A4E10Q➂➁
1NC — FA NC YW1L-A4E01Q➂➁
2NO NO FA NO YW1L-A4E20Q➂➁
2NC NC FA NC YW1L-A4E02Q➂➁
1NO-1NC NO FA NC YW1L-A4E11Q➂➁
Incandes-
cent
Momentary
1NO NO FA — YW1L-M4E10Q➂➁
5: 6V AC/DC
6: 12V AC/DC
7: 24V AC/DC
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
Built-in
incandescent
lamp:
LS-T➂
1NC — FA NC YW1L-M4E01Q➂➁
2NO NO FA NO YW1L-M4E20Q➂➁
2NC NC FA NC YW1L-M4E02Q➂➁
1NO-1NC NO FA NC YW1L-M4E11Q➂➁
Maintained
1NO NO FA — YW1L-A4E10Q➂➁
1NC — FA NC YW1L-A4E01Q➂➁
2NO NO FA NO YW1L-A4E20Q➂➁
2NC NC FA NC YW1L-A4E02Q➂➁
1NO-1NC NO FA NC YW1L-A4E11Q➂➁
Note:Specify a lens color code in place of ➁ in the Part No. FA: Full voltage adapter
Specify an operating voltage code in place of ➂ in the Part No.
Dimensions
(Illuminated Pushbuttons with Plastic Bezel)
Gasket
0.5
Panel Thickness: 0.8 to 6
(LensDiameter)(LensDiameter)
ø29
ø23.6ø40
Extended
Extended with Full Shroud
Mushroom
All dimensions in mm.
30
M3.5 Terminal Screw
Contact Block
M3.5 Terminal Screw
Full-voltage Adapter
19
11
45.8
20.5
11
45.8 30
41.441.4
28.628.6
28.6
30
ø28.2
45.8 19
41.4
101010
1 2 3
Contact Block Mounting Position
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
15. 14
ø22 YW Series Illuminated Pushbuttons
Illuminated Pushbuttons with Metal Bezel
Package Quantity: 1
Shape Lamp Operation Contact
Contact Block
Mounting Position Part No.
➂ Operating
Voltage Code
➁ Lens Color
Code
1 2 3
Extended
Without
Lamp
Momentary
1NO NO FA — YW4L-M2E10Q0➁
0: without lamp
250V AC/DC
max.
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
1NC — FA NC YW4L-M2E01Q0➁
2NO NO FA NO YW4L-M2E20Q0➁
2NC NC FA NC YW4L-M2E02Q0➁
1NO-1NC NO FA NC YW4L-M2E11Q0➁
Maintained
1NO NO FA — YW4L-A2E10Q0➁
1NC — FA NC YW4L-A2E01Q0➁
2NO NO FA NO YW4L-A2E20Q0➁
2NC NC FA NC YW4L-A2E02Q0➁
1NO-1NC NO FA NC YW4L-A2E11Q0➁
LED
Momentary
1NO NO FA — YW4L-M2E10Q➂➁
2: 6V AC/DC
3: 12V AC/DC
4: 24V AC/DC
H:110/120V
AC/DC
M3: 230/240V
AC/DC
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
Y: yellow
Built-in LED
lamp:
LSED-➂➁
1NC — FA NC YW4L-M2E01Q➂➁
2NO NO FA NO YW4L-M2E20Q➂➁
2NC NC FA NC YW4L-M2E02Q➂➁
1NO-1NC NO FA NC YW4L-M2E11Q➂➁
Maintained
1NO NO FA — YW4L-A2E10Q➂➁
1NC — FA NC YW4L-A2E01Q➂➁
2NO NO FA NO YW4L-A2E20Q➂➁
2NC NC FA NC YW4L-A2E02Q➂➁
1NO-1NC NO FA NC YW4L-A2E11Q➂➁
Incandes-
cent
Momentary
1NO NO FA — YW4L-M2E10Q➂➁
5: 6V AC/DC
6: 12V AC/DC
7: 24V AC/DC
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
Built-in
incandescent
lamp:
LS-T➂
1NC — FA NC YW4L-M2E01Q➂➁
2NO NO FA NO YW4L-M2E20Q➂➁
2NC NC FA NC YW4L-M2E02Q➂➁
1NO-1NC NO FA NC YW4L-M2E11Q➂➁
Maintained
1NO NO FA — YW4L-A2E10Q➂➁
1NC — FA NC YW4L-A2E01Q➂➁
2NO NO FA NO YW4L-A2E20Q➂➁
2NC NC FA NC YW4L-A2E02Q➂➁
1NO-1NC NO FA NC YW4L-A2E11Q➂➁
Extended with
Full Shroud
Without
Lamp
Momentary
1NO NO FA — YW4L-MF2E10Q0➁
0: without lamp
250V AC/DC
max.
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
1NC — FA NC YW4L-MF2E01Q0➁
2NO NO FA NO YW4L-MF2E20Q0➁
2NC NC FA NC YW4L-MF2E02Q0➁
1NO-1NC NO FA NC YW4L-MF2E11Q0➁
Maintained
1NO NO FA — YW4L-AF2E10Q0➁
1NC — FA NC YW4L-AF2E01Q0➁
2NO NO FA NO YW4L-AF2E20Q0➁
2NC NC FA NC YW4L-AF2E02Q0➁
1NO-1NC NO FA NC YW4L-AF2E11Q0➁
LED
Momentary
1NO NO FA — YW4L-MF2E10Q➂➁
2: 6V AC/DC
3: 12V AC/DC
4: 24V AC/DC
H:110/120V
AC/DC
M3: 230/240V
AC/DC
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
Y: yellow
Built-in LED
lamp:
LSED-➂➁
1NC — FA NC YW4L-MF2E01Q➂➁
2NO NO FA NO YW4L-MF2E20Q➂➁
2NC NC FA NC YW4L-MF2E02Q➂➁
1NO-1NC NO FA NC YW4L-MF2E11Q➂➁
Maintained
1NO NO FA — YW4L-AF2E10Q➂➁
1NC — FA NC YW4L-AF2E01Q➂➁
2NO NO FA NO YW4L-AF2E20Q➂➁
2NC NC FA NC YW4L-AF2E02Q➂➁
1NO-1NC NO FA NC YW4L-AF2E11Q➂➁
Incandes-
cent
Momentary
1NO NO FA — YW4L-MF2E10Q➂➁
5: 6V AC/DC
6: 12V AC/DC
7: 24V AC/DC
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
Built-in
incandescent
lamp:
LS-T➂
1NC — FA NC YW4L-MF2E01Q➂➁
2NO NO FA NO YW4L-MF2E20Q➂➁
2NC NC FA NC YW4L-MF2E02Q➂➁
1NO-1NC NO FA NC YW4L-MF2E11Q➂➁
Maintained
1NO NO FA — YW4L-AF2E10Q➂➁
1NC — FA NC YW4L-AF2E01Q➂➁
2NO NO FA NO YW4L-AF2E20Q➂➁
2NC NC FA NC YW4L-AF2E02Q➂➁
1NO-1NC NO FA NC YW4L-AF2E11Q➂➁
Note:Specify a lens color code in place of ➁ in the Part No. FA: Full voltage adapter
Specify an operating voltage code in place of ➂ in the Part No.
16. 15
YW Series Illuminated Pushbuttons ø22
All dimensions in mm.
Style Lamp Operation Contact
Contact Block
Mounting Position Part No.
➂ Operating
Voltage Code
➁ Lens Color
Code
1 2 3
ø40mm Mushroom
Without
Lamp
Momentary
1NO NO FA — YW4L-M4E10Q0➁
0: without lamp
250V AC/DC
max.
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
1NC — FA NC YW4L-M4E01Q0➁
2NO NO FA NO YW4L-M4E20Q0➁
2NC NC FA NC YW4L-M4E02Q0➁
1NO-1NC NO FA NC YW4L-M4E11Q0➁
Maintained
1NO NO FA — YW4L-A4E10Q0➁
1NC — FA NC YW4L-A4E01Q0➁
2NO NO FA NO YW4L-A4E20Q0➁
2NC NC FA NC YW4L-A4E02Q0➁
1NO-1NC NO FA NC YW4L-A4E11Q0➁
LED
Momentary
1NO NO FA — YW4L-M4E10Q➂➁
2: 6V AC/DC
3: 12V AC/DC
4: 24V AC/DC
H:110/120V
AC/DC
M3: 230/240V
AC/DC
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
Y: yellow
Built-in LED
lamp:
LSED-➂➁
1NC — FA NC YW4L-M4E01Q➂➁
2NO NO FA NO YW4L-M4E20Q➂➁
2NC NC FA NC YW4L-M4E02Q➂➁
1NO-1NC NO FA NC YW4L-M4E11Q➂➁
Maintained
1NO NO FA — YW4L-A4E10Q➂➁
1NC — FA NC YW4L-A4E01Q➂➁
2NO NO FA NO YW4L-A4E20Q➂➁
2NC NC FA NC YW4L-A4E02Q➂➁
1NO-1NC NO FA NC YW4L-A4E11Q➂➁
Incandes-
cent
Momentary
1NO NO FA — YW4L-M4E10Q➂➁
5: 6V AC/DC
6: 12V AC/DC
7: 24V AC/DC
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
Built-in
incandescent
lamp:
LS-T➂
1NC — FA NC YW4L-M4E01Q➂➁
2NO NO FA NO YW4L-M4E20Q➂➁
2NC NC FA NC YW4L-M4E02Q➂➁
1NO-1NC NO FA NC YW4L-M4E11Q➂➁
Maintained
1NO NO FA — YW4L-A4E10Q➂➁
1NC — FA NC YW4L-A4E01Q➂➁
2NO NO FA NO YW4L-A4E20Q➂➁
2NC NC FA NC YW4L-A4E02Q➂➁
1NO-1NC NO FA NC YW4L-A4E11Q➂➁
Note: Specify a lens color code in place of ➁ in the Part No. FA: Full voltage adapter
Specify an operating voltage code in place of ➂ in the Part No.
Dimensions (Illuminated Pushbutton with Metal Bezel)
Extended
GasketFull-voltage Adapter
M3.5 Terminal Screw
101010
0.3
Panel Thickness: 0.8 to 6
Contact Block
M3.5 Terminal Screw
Extended with Full Shroud
41.4
ø29.5
28.6
30
Lock
ø23.6
(LensDiameter)
Locking Ring
45.8 19.2
Mushroom
41.4
28.6
30
Lock
ø40
20.5
11.3
45.8
Locking Ring
(LensDiameter)
ø29.5
41.4
28.6
30
Lock
ø23.6
11.3
45.8 19
Locking Ring
(LensDiameter)
Contact Block Mounting Position
1 2 3
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
17. 16
ø22 YW Series Selector Switches
Selector Switches with Plastic Bezel
Package Quantity: 1
Shape
Knob
No. of
Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Maintained
Spring Return
from Right — —
L R –
90°
2-Position
L R
1NO
(10)
1 NO ●
YW1S-2E10 YW1S-21E10 — —2
3
1NC
(01)
1
YW1S-2E01 YW1S-21E01 — —2
3 NC ●
2NO
(20)
1 NO ●
YW1S-2E20 YW1S-21E20 — —2
3 NO ●
2NC
(02)
1 NC ●
YW1S-2E02 YW1S-21E02 — —2
3 NC ●
1NO-1NC
(11)
1 NO ●
YW1S-2E11 YW1S-21E11 — —2
3 NC ●
3NO
(30)
1 NO ●
YW1S-2E30 YW1S-21E30 — —2 NO ●
3 NO ●
3NC
(03)
1 NC ●
YW1S-2E03 YW1S-21E03 — —2 NC ●
3 NC ●
2NO-1NC
(21)
1 NO ●
YW1S-2E21 YW1S-21E21 — —2 NO ●
3 NC ●
1NO-2NC
(12)
1 NO ●
YW1S-2E12 YW1S-21E12 — —2 NC ●
3 NC ●
No. of
Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Maintained
Spring Return
from Right
Spring Return
from Left
Spring Return
Two-WayL C R
45°
3-Position
L
C
R
2NO
(20)
1 NO ●
YW1S-3E20 YW1S-31E20 YW1S-32E20 YW1S-33E202
3 NO ●
2NO
(20N1)
1
YW1S-3E20N1 YW1S-31E20N1 YW1S-32E20N1 YW1S-33E20N12 NO ● ●
3 NO ●
2NC
(02)
1 NC
YW1S-3E02 YW1S-31E02 YW1S-32E02 YW1S-33E022
3 NC
2NC
(02N1)
1
YW1S-3E02N1 YW1S-31E02N1 YW1S-32E02N1 YW1S-33E02N12 NC ●
3 NC
1NO-1NC
(11)
1 NO ●
YW1S-3E11 YW1S-31E11 YW1S-32E11 YW1S-33E112
3 NC
1NO-1NC
(11N1)
1 NC
YW1S-3E11N1 YW1S-31E11N1 YW1S-32E11N1 YW1S-33E11N12
3 NO ●
1NO-1NC
(11N2)
1 NO ●
YW1S-3E11N2 YW1S-31E11N2 YW1S-32E11N2 YW1S-33E11N22 NC ●
3
1NO-1NC
(11N3)
1
YW1S-3E11N3 YW1S-31E11N3 YW1S-32E11N3 YW1S-33E11N32 NC ●
3 NO ●
1NO-1NC
(11N4)
1
YW1S-3E11N4 YW1S-31E11N4 YW1S-32E11N4 YW1S-33E11N42 NO ● ●
3 NC
3NO
(30)
1 NO ●
YW1S-3E30 YW1S-31E30 YW1S-32E30 YW1S-33E302 NO ● ●
3 NO ●
3NC
(03)
1 NC
YW1S-3E03 YW1S-31E03 YW1S-32E03 YW1S-33E032 NC ●
3 NC
2NO-1NC
(21)
1 NO ●
YW1S-3E21 YW1S-31E21 YW1S-32E21 YW1S-33E212 NC ●
3 NO ●
1NO-2NC
(12)
1 NC
YW1S-3E12 YW1S-31E12 YW1S-32E12 YW1S-33E122 NO ● ●
3 NC
18. 17
YW Series Selector Switches ø22
Selector Switches with Metal Bezel
Package Quantity: 1
Shape
Knob
No. of
Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Maintained Spring Return
from Right
— —
L R –
90°
2-Position
L R
1NO
(10)
1 NO ●
YW4S-2E10 YW4S-21E10 — —2
3
1NC
(01)
1
YW4S-2E01 YW4S-21E01 — —2
3 NC ●
2NO
(20)
1 NO ●
YW4S-2E20 YW4S-21E20 — —2
3 NO ●
2NC
(02)
1 NC ●
YW4S-2E02 YW4S-21E02 — —2
3 NC ●
1NO-1NC
(11)
1 NO ●
YW4S-2E11 YW4S-21E11 — —2
3 NC ●
3NO
(30)
1 NO ●
YW4S-2E30 YW4S-21E30 — —2 NO ●
3 NO ●
3NC
(03)
1 NC ●
YW4S-2E03 YW4S-21E03 — —2 NC ●
3 NC ●
2NO-1NC
(21)
1 NO ●
YW4S-2E21 YW4S-21E21 — —2 NO ●
3 NC ●
1NO-2NC
(12)
1 NO ●
YW4S-2E12 YW4S-21E12 — —2 NC ●
3 NC ●
No. of
Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Maintained
Spring Return
from Right
Spring Return
from Left
Spring Return
Two-WayL C R
45°
3-Position
L
C
R
2NO
(20)
1 NO ●
YW4S-3E20 YW4S-31E20 YW4S-32E20 YW4S-33E202
3 NO ●
2NO
(20N1)
1
YW4S-3E20N1 YW4S-31E20N1 YW4S-32E20N1 YW4S-33E20N12 NO ● ●
3 NO ●
2NC
(02)
1 NC
YW4S-3E02 YW4S-31E02 YW4S-32E02 YW4S-33E022
3 NC
2NC
(02N1)
1
YW4S-3E02N1 YW4S-31E02N1 YW4S-32E02N1 YW4S-33E02N12 NC ●
3 NC
1NO-1NC
(11)
1 NO ●
YW4S-3E11 YW4S-31E11 YW4S-32E11 YW4S-33E112
3 NC
1NO-1NC
(11N1)
1 NC
YW4S-3E11N1 YW4S-31E11N1 YW4S-32E11N1 YW4S-33E11N12
3 NO ●
1NO-1NC
(11N2)
1 NO ●
YW4S-3E11N2 YW4S-31E11N2 YW4S-32E11N2 YW4S-33E11N22 NC ●
3
1NO-1NC
(11N3)
1
YW4S-3E11N3 YW4S-31E11N3 YW4S-32E11N3 YW4S-33E11N32 NC ●
3 NO ●
1NO-1NC
(11N4)
1
YW4S-3E11N4 YW4S-31E11N4 YW4S-32E11N4 YW4S-33E11N42 NO ● ●
3 NC
3NO
(30)
1 NO ●
YW4S-3E30 YW4S-31E30 YW4S-32E30 YW4S-33E302 NO ● ●
3 NO ●
3NC
(03)
1 NC
YW4S-3E03 YW4S-31E03 YW4S-32E03 YW4S-33E032 NC ●
3 NC
2NO-1NC
(21)
1 NO ●
YW4S-3E21 YW4S-31E21 YW4S-32E21 YW4S-33E212 NC ●
3 NO ●
1NO-2NC
(12)
1 NC
YW4S-3E12 YW4S-31E12 YW4S-32E12 YW4S-33E122 NO ● ●
3 NC
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
19. 18
ø22 YW Series Selector Switches
Contact Block Mounting Position
Selector Switch with Plastic Bezel
Dimensions
Selector Switch with Plastic Bezel
Selector Switch with Metal Bezel Selector Switch with Metal Bezel
1 2 3
Contact Block
Mounting Position
L
C
R
Operator Position
Gasket
Panel Thickness: 0.8 to 6
0.5
Locking Ring
24
11
45.8
3-Position
Lock
ø27.6KnobDiameter
41.4
28.6
30
ø29
45° 45°
2-Position
90°
Contact Block
M3.5 Terminal Screw
1010
1 2 3
Contact Block
Mounting Position
L
C
R
Operator Position
24
11.3
45.8
Locking Ring
90°
41.4
28.6
30
ø29.5
2-position
Lock
ø29.5
45°45°
30
28.6
41.4
3-position
Lock
0.3
1010
Contact Block
M3.5 Terminal Screw
Gasket
Panel Thickness: 0.8 to 6
All dimensions in mm.
20. 19
YW Series Key Selector Switches ø22
Key Selector Switches (90° 2-Position)
Package Quantity: 1
No. of Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Part No.
Plastic Bezel Metal Bezel
L R
90° 2-position
Maintained
L R
1NO
(10)
1 NO ●
YW1K-2AE10 YW4K-2AE102
3
1NC
(01)
1
YW1K-2AE01 YW4K-2AE012
3 NC ●
2NO
(20)
1 NO ●
YW1K-2AE20 YW4K-2AE202
3 NO ●
2NC
(02)
1 NC ●
YW1K-2AE02 YW4K-2AE022
3 NC ●
1NO-1NC
(11)
1 NO ●
YW1K-2AE11 YW4K-2AE112
3 NC ●
3NO
(30)
1 NO ●
YW1K-2AE30 YW4K-2AE302 NO ●
3 NO ●
3NC
(03)
1 NC ●
YW1K-2AE03 YW4K-2AE032 NC ●
3 NC ●
2NO-1NC
(21)
1 NO ●
YW1K-2AE21 YW4K-2AE212 NO ●
3 NC ●
1NO-2NC
(12)
1 NO ●
YW1K-2AE12 YW4K-2AE122 NC ●
3 NC ●
90° 2-position
Spring Return from
Right
L R
1NO
(10)
1 NO ●
YW1K-21BE10 YW4K-21BE102
3
1NC
(01)
1
YW1K-21BE01 YW4K-21BE012
3 NC ●
2NO
(20)
1 NO ●
YW1K-21BE20 YW4K-21BE202
3 NO ●
2NC
(02)
1 NC ●
YW1K-21BE02 YW4K-21BE022
3 NC ●
1NO-1NC
(11)
1 NO ●
YW1K-21BE11 YW4K-21BE112
3 NC ●
3NO
(30)
1 NO ●
YW1K-21BE30 YW4K-21BE302 NO ●
3 NO ●
3NC
(03)
1 NC ●
YW1K-21BE03 YW4K-21BE032 NC ●
3 NC ●
2NO-1NC
(21)
1 NO ●
YW1K-21BE21 YW4K-21BE212 NO ●
3 NC ●
1NO-2NC
(12)
1 NO ●
YW1K-21BE12 YW4K-21BE122 NC ●
3 NC ●
On the spring-returned types, the key can be removed only from the maintained position. On the maintained types, the key can be re-•
moved from every position. Key retained positions are also available. See Part No. Development shown on page 20.
Each key selector switch is supplied with two identical keys.•
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
21. 20
ø22 YW Series Key Selector Switches
No. of Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Part No.
Plastic Bezel Metal Bezel
L C R
45° 3-position
Maintained
L
C
R
2NO
(20)
1 NO ●
YW1K-3AE20 YW4K-3AE202
3 NO ●
2NO
(20N1)
1
YW1K-3AE20N1 YW4K-3AE20N12 NO ● ●
3 NO ●
2NC
(02)
1 NC
YW1K-3AE02 YW4K-3AE022
3 NC
2NC
(02N1)
1
YW1K-3AE02N1 YW4K-3AE02N12 NC ●
3 NC
1NO-1NC
(11)
1 NO ●
YW1K-3AE11 YW4K-3AE112
3 NC
1NO-1NC
(11N1)
1 NC
YW1K-3AE11N1 YW4K-3AE11N12
3 NO ●
1NO-1NC
(11N2)
1 NO ●
YW1K-3AE11N2 YW4K-3AE11N22 NC ●
3
1NO-1NC
(11N3)
1
YW1K-3AE11N3 YW4K-3AE11N32 NC ●
3 NO ●
1NO-1NC
(11N4)
1
YW1K-3AE11N4 YW4K-3AE11N42 NO ● ●
3 NC
3NO
(30)
1 NO ●
YW1K-3AE30 YW4K-3AE302 NO ● ●
3 NO ●
3NC
(03)
1 NC
YW1K-3AE03 YW4K-3AE032 NC ●
3 NC
2NO-1NC
(21)
1 NO ●
YW1K-3AE21 YW4K-3AE212 NC ●
3 NO ●
1NO-2NC
(12)
1 NC
YW1K-3AE12 YW4K-3AE122 NO ● ●
3 NC
On the maintained types, the key can be removed from every position. Key retained positions are also available. See Part No. Develop-•
ment below.
Each key selector switch is supplied with two identical keys.•
Part No. Development Contact Block Mounting
Position
Key removal position code
2-position
A: Removable in all positions
B: Removable in left only
C: Removable in right only
YW1K-2 A E21
1 2 3
Contact Block
Mounting Position
L
C
R
Operator Position
Key Selector Switches (45° 3-Position)
Package Quantity: 1
3-position
A: Removable in all positions
B: Removable in left and center
C: Removable in right and center
D: Removable in center only
E: Removable in right and left
G: Removable in left only
H: Removable in right only
22. 21
YW Series Key Selector Switches ø22
No. of Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Part No.
Plastic Bezel Metal Bezel
L C R
45° 3-position
Spring Return from
Right
L
C
R
2NO
(20)
1 NO ●
YW1K-31BE20 YW4K-31BE202
3 NO ●
2NO
(20N1)
1
YW1K-31BE20N1 YW4K-31BE20N12 NO ● ●
3 NO ●
2NC
(02)
1 NC
YW1K-31BE02 YW4K-31BE022
3 NC
2NC
(02N1)
1
YW1K-31BE02N1 YW4K-31BE02N12 NC ●
3 NC
1NO-1NC
(11)
1 NO ●
YW1K-31BE11 YW4K-31BE112
3 NC
1NO-1NC
(11N1)
1 NC
YW1K-31BE11N1 YW4K-31BE11N12
3 NO ●
1NO-1NC
(11N2)
1 NO ●
YW1K-31BE11N2 YW4K-31BE11N22 NC ●
3
1NO-1NC
(11N3)
1
YW1K-31BE11N3 YW4K-31BE11N32 NC ●
3 NO ●
1NO-1NC
(11N4)
1
YW1K-31BE11N4 YW4K-31BE11N42 NO ● ●
3 NC
3NO
(30)
1 NO ●
YW1K-31BE30 YW4K-31BE302 NO ● ●
3 NO ●
3NC
(03)
1 NC
YW1K-31BE03 YW4K-31BE032 NC ●
3 NC
2NO-1NC
(21)
1 NO ●
YW1K-31BE21 YW4K-31BE212 NC ●
3 NO ●
1NO-2NC
(12)
1 NC
YW1K-31BE12 YW4K-31BE122 NO ● ●
3 NC
On the spring-returned types, the key can be removed only from the maintained position. Key retained positions are also available. See•
Part No. Development shown on page 20.
Each key selector switch is supplied with two identical keys.•
Key Selector Switches (45° 3-Position)
Package Quantity: 1
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
23. 22
ø22 YW Series Key Selector Switches
No. of Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Part No.
Plastic Bezel Metal Bezel
L C R
45° 3-position
Spring Return from
Left
L
C
R
2NO
(20)
1 NO ●
YW1K-32CE20 YW4K-32CE202
3 NO ●
2NO
(20N1)
1
YW1K-32CE20N1 YW4K-32CE20N12 NO ● ●
3 NO ●
2NC
(02)
1 NC
YW1K-32CE02 YW4K-32CE022
3 NC
2NC
(02N1)
1
YW1K-32CE02N1 YW4K-32CE02N12 NC ●
3 NC
1NO-1NC
(11)
1 NO ●
YW1K-32CE11 YW4K-32CE112
3 NC
1NO-1NC
(11N1)
1 NC
YW1K-32CE11N1 YW4K-32CE11N12
3 NO ●
1NO-1NC
(11N2)
1 NO ●
YW1K-32CE11N2 YW4K-32CE11N22 NC ●
3
1NO-1NC
(11N3)
1
YW1K-32CE11N3 YW4K-32CE11N32 NC ●
3 NO ●
1NO-1NC
(11N4)
1
YW1K-32CE11N4 YW4K-32CE11N42 NO ● ●
3 NC
3NO
(30)
1 NO ●
YW1K-32CE30 YW4K-32CE302 NO ● ●
3 NO ●
3NC
(03)
1 NC
YW1K-32CE03 YW4K-32CE032 NC ●
3 NC
2NO-1NC
(21)
1 NO ●
YW1K-32CE21 YW4K-32CE212 NC ●
3 NO ●
1NO-2NC
(12)
1 NC
YW1K-32CE12 YW4K-32CE122 NO ● ●
3 NC
On the spring-returned types, the key can be removed only from the maintained position. Key retained positions are also available. See•
Part No. Development shown on page 20.
Each key selector switch is supplied with two identical keys.•
Key Selector Switches (45° 3-Position)
Package Quantity: 1
24. 23
YW Series Key Selector Switches ø22
No. of Positions
Contact
Configuration
Contact Block
Mounting Position
Operator Position
Part No.
Plastic Bezel Metal Bezel
L C R
45° 3-position
Spring Return Two-
way
L
C
R
2NO
(20)
1 NO ●
YW1K-33DE20 YW4K-33DE202
3 NO ●
2NO
(20N1)
1
YW1K-33DE20N1 YW4K-33DE20N12 NO ● ●
3 NO ●
2NC
(02)
1 NC
YW1K-33DE02 YW4K-33DE022
3 NC
2NC
(02N1)
1
YW1K-33DE02N1 YW4K-33DE02N12 NC ●
3 NC
1NO-1NC
(11)
1 NO ●
YW1K-33DE11 YW4K-33DE112
3 NC
1NO-1NC
(11N1)
1 NC
YW1K-33DE11N1 YW4K-33DE11N12
3 NO ●
1NO-1NC
(11N2)
1 NO ●
YW1K-33DE11N2 YW4K-33DE11N22 NC ●
3
1NO-1NC
(11N3)
1
YW1K-33DE11N3 YW4K-33DE11N32 NC ●
3 NO ●
1NO-1NC
(11N4)
1
YW1K-33DE11N4 YW4K-33DE11N42 NO ● ●
3 NC
3NO
(30)
1 NO ●
YW1K-33DE30 YW4K-33DE302 NO ● ●
3 NO ●
3NC
(03)
1 NC
YW1K-33DE03 YW4K-33DE032 NC ●
3 NC
2NO-1NC
(21)
1 NO ●
YW1K-33DE21 YW4K-33DE212 NC ●
3 NO ●
1NO-2NC
(12)
1 NC
YW1K-33DE12 YW4K-33DE122 NO ● ●
3 NC
On the spring-returned types, the key can be removed only from the maintained position. Key retained positions are also available. See•
Part No. Development shown on page 20.
Each key selector switch is supplied with two identical keys.•
Key Selector Switches (45° 3-Position)
Package Quantity: 1
EmergencyStopSwitchesPushbuttonsPilotLightsIlluminatedPushbuttonsSelectorSwitchesKeySelectorSwitches
25. 24
ø22 YW Series Key Selector Switches
Dimensions (Key Selector Switch)
45.8
0.3
11
38
0.5
45.8
GasketGasket
Panel Thickness 0.8 to 6
Locking Ring
Panel Thickness 0.8 to 6
M3.5 Terminal Screw
Contact Block
M3.5 Terminal Screw
Contact Block
Metal BezelPlastic Bezel
38
11.3
Locking Ring
2-position
90°
2-position
90°
3-position
ø29.5
45°45°
30.0
28.6
41.4
Lock
3-position
Lock
41.4
28.6
30.0
ø29.0
45° 45°
All dimensions in mm.
Accessories
Name & Shape Part No. Description & Dimensions (mm)
Package
Quantity
Locking Ring Wrench
MW9Z-T1
Metallic tool used to tighten the
plastic locking ring when installing
the YW series control unit in a
panel.
1
Lamp Holder Tool
OR-55
Made of rubber.
Used for replacing lamps.
1
Rubber Mounting Hole Plug
OB-31PN05
Used for plugging unused mounting holes in the
panel.
Color: Black
5
Metallic Mounting Hole Plug
LW9Z-BM
Used for plugging unused mounting holes in the
panel.
Weight: Approx. 18g
1
Anti-Rotation Ring
HW9Z-RLPN10
Prevents rotation of switches in panel.
Mainly used with selector switches when no
nameplate is used.
With waterproof gasket (IP65).
Made of plastic (black).
Applicable panel thickness: 1.2 to 4.5 mm
10
ø28110
59
ø11.6
ø14
ø29
ø25
3.5
3.5
Locking Ring
ø25.8
123
TOP
ø22
ø29
1.5
26. 25
YW Series Accessories / Maintenance Parts ø22
Name & Shape Part No. Description & Dimensions (mm)
Package
Quantity
Padlock Cover
HW9Z-KL1
Plastic hinged cover to protect pushbuttons,
illuminated pushbuttons, or selector switches.
Degree of protection: IP65.
Applicable panel thickness: 0.8 to 3.2 mm
1
Pad Lock Hole ø8
Waterproof Gasket
Thickness 0.5
30
70
ø50
93
29.5
30
R66.5
Panel Thickness 0.8 to 3.2
82.5
ø22.2
24
Name & Shape Part No. Description & Dimensions (mm)
Package
Quantity
LED Lamp
LSED-6➁ 6V AC/DC
Specify a color code in place of
➁ in the Part No.:
A (amber), G (green), PW
(pure white), R (red), S (blue),
Y (yellow)
Applicable units:
For the rated current, see page
4.
Note:Yellow LED lamps are
used for white illumination
of pilot lights and
illuminated pushbuttons.
1
LSED-1➁ 12V AC/DC
LSED-2➁ 24V AC/DC
LSED-H➁ 110V AC/DC
LSED-M3➁ 230/240V AC/DC
Incandescent Lamp
LS-T6P 6.3V, 1W
One pack contains 100
incandescent lamps.
100LS-T8P 18V, 1W
LS-T3P 30V, 1W
Single Contact Block
YW-E10 Contact: 1NO Color: blue
10
YW-E01 Contact: 1NC Color: reddish purple
Double Contact Block
YW-EW20 Contact: 2NO Color: blue
Note: Double contact blocks cannot
be used on emergency stop
switches.
10YW-EW02 Contact: 2NC Color: reddish purple
YW-EW11 Contact: 1NO-1NC
Color: blue and
reddish purple
Spare Key
YW9Z-
SK00PN02
2
ø10.6
20.8
Base BA9S/14
Base BA9S/13
±123
±1ø11
M3.5
Terminal Screw
22.3
41.4
5
M3.5
Terminal Screw
42.3
41.4
5
Maintenance Parts
27. 26
ø22 YW Series Accessories
Buttons, Lenses, and Marking Plates
Name Style Part No.
➀ ➁
Color Code
Dimensions (mm)
Package
Quantity
Button
(for pushbuttons)
Extended YW9Z-B12➀PN10
B: black
G: green
R: red
S: blue
W: white
Y: yellow
10
Mushroom
ø40mm
YW9Z-B14➀PN10
Lens
(for pilot lights)
Flush YW9Z-PL11➁PN10
A: amber
C: clear
G: green
R: red
S: blue
W: white
Y: yellow
10
Flush
Marking
YW9Z-PL11B➁PN10
A: amber
C: clear
G: green
R: red
S: blue
Y: yellow
10
Extended YW9Z-PL12T➁PN10 A: amber
C: clear
G: green
R: red
S: blue
W: white
Y: yellow
10
Dome YW9Z-PL12➁PN10 10
Lens
(for illuminated pushbuttons)
Extended YW9Z-L12➁PN10
A: amber
C: clear
G: green
R: red
S: blue
Y: yellow
10
Mushroom
ø40mm
YW9Z-L14➁PN10
Marking Plate
(for pilot lights)
— YW9Z-PP12PN10 — 10
Marking Plate
(for illuminated pushbuttons)
— YW9Z-P12PN10 — 10
9.3
ø23.6
ø23.6
6
10.8
ø40
8.5
ø29.8
ø29.8
9
14.5
ø29.8
14.5
ø29.8
9.3
ø23.6
ø23.6
6
10.8
ø40
ø22.7
4.4
ø21.8
221
1.4
ø16
5
15.2
ø17.2
28. 27
YW Series Accessories ø22
Nameplates
HWAM, HWAQ, HWAS, and HWAV
Name Legend Material Part No. Ordering No.
Package
Quantity
Dimensions (mm)
HWAM
Order marking plate
separately.
Plastic (black)
1.5 mm thick
HWAM
HWAM 1
HWAMPN10 10
HWAQ
Order marking plate
separately.
Plastic (black)
1.5 mm thick
HWAQ
HWAQ 1
HWAQPN10 10
HWAQ Blank
Plastic (black)
1.5 mm thick
HWAS-0
HWAS-0 1
HWAS-0PN10 10
HWAV
Blank
Plastic (yellow)
1.5 mm thick
HWAV-0 HWAV-0 1
EMERGENCY
STOP
ø60
ø22
0.91.6
Legend “Emergency Stop”
is indicated outside a ø44mm circle.
EMERGENCY STOP HWAV-27 HWAV-27 1
Making Plate
Description Material Part No. Ordering No. Package Quantity Dimensions (mm)
HWNP
Aluminum (black)
1.0 mm thick
HWNP-∗
HWNP-∗ 1
White legend on black background.
HWNP-∗PN10 10
Specify a legend code in place of• ∗ in the Ordering No.
Legends
Code Legend
0 (blank)
1 ON
2 OFF
3 START
4 STOP
31 OFF-ON
35 HAND-AUTO
53 HAND-OFF-AUTO
Marking Plate
11.5
2.7
30
12.1
14.914.5
27
29
ø22
R14.9
29
2.7
11.9
14.514.9
ø22
30
12.1
27
R14.9
Marking Plate
0.91.645
ø22
27
12
Nameplate
Installing the marking plate
on a nameplate
To remove the marking plate, insert the flat screwdriver beween
the marking plate and nameplate.
Nameplate
When requring no anti-rotation, remove the projection using pliers.
Marking Plate
Flat Screwdriver
MarkingPlate
Note: When using an nameplate, the mounting panel thickness is decreased by 1.5 mm.
➀
➁
29. 28
ø22 YW Series Accessories
Din Rail Mount Transformer For 6V
Primary Voltage
(50/60 Hz)
Part No. Applicable Lamp Rating
110V AC TWR516 One full voltage type
illuminated unit containing
LED lamp LSED-6 (6V AC/DC)
or incandescent lamp LS-T6
(6.3V)
115V AC TWR5116
120V AC TWR5126
220V AC TWR526
230V AC TWR5236
240V AC TWR5246
380V AC TWR5386
440V AC TWR546
480V AC TWR5486
Dimensions (mm)
Secondary Terminal
Screws M3.5
2-ø3.5
Mounting Holes
Primary Terminal
Screws M3.5
30
22
40
48
40
41
52
Note: Finger-safe terminal cover is supplied with the transformer.
Transformer
Switch Guards Package Quantity: 1
Part No. & Shape (mm) Dimensions Part No. & Shape Dimensions (mm)
EMO Switch Guard
SEMI S2 compliant (Note 1)
32
22
38
ø80
ø66.8
64
47
ø22
EMO Switch Guard
SEMI S2 compliant (Note 2)
SEMATECH compliant (Note 3)
35
67
25
ø90
50
ø22
ø76
EMO Switch Guard
SEMI S2 compliant (Note 1)
SEMATECH compliant (Note 3)
ø22.2
36.5
ø76.1
ø90
EMO Switch Guard
SEMI S2 compliant (Note 2)
SEMATECH compliant (Note 3)
75
ø22
76
27
ø90
33
40
34.4
36.2
EMO Switch Guard
SEMI S2 compliant (Note 2)
35
25
52
ø74
42
ø22
ø66
Material: Polyamide (PA6)
Color:Yellow, Munsell 2.5Y 8/10 equivalent
Degree of protection: IP65
Note 1: SEMI S2-0703 12.5.1 compliant.
Note 2: The combination of IDEC’s emergency stop switches and EMO switch guards are approved by TÜV Rheinland for compliance with SEMI S2 standard.
Note 3: SEMATECH Application Guide for SEMI S2-93, 12.4.c. compliant.
30. 29
YW Series Instructions ø22
Safety Precautions
Instructions
Panel Mounting
Remove the contact block from the operator (for pilot lights, remove
the transformer or full voltage unit from the pilot light). Remove the
locking ring from the operator. Insert the operator into the panel
cut-out from the front, tighten the locking ring from the back, then
install the contact block to the operator.
Removing and Installing the Contact Block
1. To remove the operator from the contact block, pull up the
locking lever and turn it to the left. Then the operator can be
pulled out.
2. To reinstall, place the TOP marking on the operator and the idec
marking on the contact block mounting adapter in the same
direction, and insert the operator into the contact block mounting
adapter. Then turn the locking lever to the right.
Removing and Installing the Transformer
1. Insert a flat screwdriver (5 mm wide at maximum) into the latch
hole on the transformer unit as shown in the photo below, and
disengage the latch. Then pull out the operator.
2. To reinstall, place the TOP marking on the operator and the latch
in the same direction, and push the operator into the transformer.
➁
➀
Removing the Full Voltage Unit
➁
➀
1. To remove the full voltage unit, squeeze the full voltage unit from
both sides to disengage the latch as shown, and pull it out. Like
the transformer unit, the full voltage unit can also be pulled out
by inserting a flat screwdriver into the latch hole as shown.
2. To reinstall, place the TOP markings on the operator and the
latch on the full voltage unit in the same direction, and insert the
operator into the full voltage unit.
Notes for Panel Mounting
1. Use the optional locking ring wrench (MW9Z-T1) to mount the
operator onto a panel. Tightening torque must not exceed 2.0
N · m. Do not use pliers. Excessive tightening will damage the
locking ring.
2. For contact blocks and transformers housing LED and
incandescent lamps, make sure not to press the lamps too hard,
otherwise the lamp socket may be damaged.
Insertion Order of Lens and Marking Plate
Illuminated Pushbutton Pilot Light
Marking Plate
Lens
Extended
Marking Plate
Lens
Mushroom
With Full Shroud
Marking Plate
Lens
Full Shroud
Flush
Extended
Dome
Flush Marking
Marking Plate
Lens
Lens
Turn off the power to theYW series control units before starting
installation, removal, wiring, maintenance, and inspection of the
products. Failure to turn power off may cause electrical shocks or
fire hazard.
To avoid burning your hand, use the lamp holder tool when
replacing lamps.
For wiring, use wires of a proper size to meet the voltage and
current requirements.Tighten the M3.5 terminal screws to a
tightening torque of 1.0 N·m. Failure to tighten the terminal screws
may cause overheating and fire.
➀ Pull up the locking lever.
➁ Turn the lever to the left.
➂ Pull out the contact block
➀➁
➂
31. 30
Marking
For YW series pilot lights and illuminated pushbuttons, legends
and symbols can be engraved on built-in marking plates, or printed
mylar film can be inserted under the lens for labeling purposes.
Mylar film is not supplied with the control units and must be
supplied by the end user.
Built-in Marking Plate and Marking Film Size
Unit Pilot Light Illuminated Pushbutton
Built-inMarkingPlate
Engraving depth: 0.5 mm maximum
Marking plate material: White acrylic
ApplicableMarkingFilm
0.1-mm-thick × 2 sheets or 0.2-mm-thick × 1 sheet
Film material: Mylar (recommended)
Note: Marking film is not supplied with the pilot light or illuminated
pushbutton.
Replacement (LED and incandescent lamps)
Lamps can be replaced using the lamp holder tool (OR-55) from
the front of the panel, or by removing the contact block from the
operator unit.
Removing the Lamp from the Front of the Panel
To remove, gently insert the lamp holder tool onto the lamp head.
Then push slightly, and turn the lamp holder tool to the left.
Installing the Lamp from the Front of the Panel
1. To install, insert the lamp head into the lamp holder tool, and
hold the lamp as shown in the figure below.
Lamp Lamp Removal Tool
2. Place the pins on the lamp base to the grooves in the lamp
socket. Insert the lamp and turn it to the right.
Pilot Light Illuminated Pushbutton
Note: LED lamps in unibody pilot lights cannot be replaced.
Removing Contact Blocks
and Full Voltage Adapters
Insert a flat screwdriver between the latch
and contact block mounting adapter, and
disengage the latch.
Make sure to remove the lamp and contact blocks before removing
the full voltage adapter.
Lamp
j
l
k k
Full Voltage Adapter
Contact Block
Tightening Torque for Terminal Screws
Tighten terminal screws to a torque of 1.0 N·m.
Anti-rotation Ring and Mounting Panel
Turn the TOP marking on the operator and the ▲ mark on the anti-
rotation ring to the recess on the mounting panel.
Projections ( mark)
Anti-rotation Ring Locking
Ring
Panel Thickness 1.2 to 4.5 mm
Mounting Panel Thickness
The mounting panel must be 0.8 to 6.0 mm in thickness. When
optional accessories are added, the applicable panel thickness
changes as shown below.
Panel Thickness
0.8 to 6 mm
Panel Thickness
0.8 to 3.2 mm
Padlock Cover
HW9Z-KL1P
Contact Bounce
When pressing or turning the operator, the NC and NO contacts will
bounce. When designing a control circuit, take the contact bounce
time into consideration (reference value: 20 ms).
ø21.0
1.0
Engraving Area
ø15.2
1.2
Engraving Area
ø22.7
20.8
-0.2
0
-0.2
0
-0.2
0
ø17.2
-0.2
0
15.0
32. 31
LED Illumination
LED lamps consist of semiconductors. If the applied voltage
exceeds the rated voltage, LED elements deteriorate due to
overheat, resulting in significant decrease in brightness, hue
change, or failure of lighting. Also, if extraneous noise, transient
voltage, or transient current is applied to the circuit, similar effects
will be caused. When using LED lamps, observe the following
instructions.
Rated Voltage
The LED illuminated units are rated at 6V, 12V, 24V, 110V, or
230/240V AC/DC, and can be used within ±10% the rated voltage
of either AC or DC, except the 230/240V AC/DC types can be used
on 250V AC/DC maximum.
DC Power
1. Switching power supply
Regulated voltage from a switching power supply is best suited.
Make sure to use within the rated voltage of the LED lamp.
2. Rechargeable battery
Note that the battery voltage may exceed the rated voltage of the
LED lamp while the battery is being charged and immediately
after the charging is complete. Be sure to use the LED lamp on a
voltage of ±10% the rated voltage, except the 230/240V AC/DC
types on 250V AC/DC maximum.
3. Full-wave rectification
Since the LED lamp is AC/DC compatible, a diode bridge for
rectification is not necessary. If the LED lamp is used on a full-
wave rectification current through a diode bridge, the rectifier
diodes will reduce the voltage, resulting in lower brightness.
4. Single-phase half-wave rectification
This is not suitable for the power source of LED lamps. Use
constant- voltage DC power.
Noise
LED elements deteriorate due to extraneous noise, resulting in
significant decrease in brightness, hue change, or failure of lighting.
When such effects are anticipated, take a protection measure
shown below, such as RC elements or a surge absorber.
[Protection Example 1] For AC circuit
LED with
transformer LED
R
C
LEDRyRelay
coil or
solenoid
R
C
LED with
transformer
[Protection Example 2] For DC circuit
Ry LED DiodeRelay
coil or
solenoid
+
–
Countermeasures against Dim Lighting
1. Leakage current through transistors or a contact protection
circuit may cause the LED lamp to illuminate dimly even when
the output is off.
2. When the LED lamp is illuminated by a transistor output, take the
following measure.
[Circuit Example]
Connect shunt resistor R in parallel with the LED lamp.
R
Io
Io: Leakage current when the output is off
R: Shunt resistor
LED
Ordering Information
When ordering, specify the Part No. and quantity.
Replacement contact blocks are supplied in a package containing 10 pieces.
Precautions for Noise
When using the unibody pilot light in an environment where it is
subjected to noise, connect a noise suppressor across terminals X1
and X2 as shown below.
X2
X1
Noise Suppressor
Key Selector Switch
Before operation, ensure that the key is inserted into the key hole
completely. Operating the key selector switch with a loose key will
cause damage to the key selector switch.
Nameplate
When anti-rotation is not required, remove
the projection from the nameplate using pliers.
Handling
Do not expose the switch to excessive shock and
vibration, otherwise the switch may be deformed
or damaged, causing malfunction or operation
failure.
Projection
Nameplate
33. IDEC CORPORATION (USA)
1175 Elko Drive
Sunnyvale, CA 94089-2209, USA
Tel: +1-408-747-0550 / (800) 262-IDEC (4332)
Fax: +1-408-744-9055 / (800) 635-6246
E-mail: opencontact@idec.com
IDEC CANADA LIMITED
3155 Pepper Mill Court, Unit 4
Mississauga, Ontario, L5L 4X7, Canada
Tel: +1-905-890-8561
Toll Free: (800) 262-IDEC (4332)
Fax: +1-905-890-8562
E-mail: sales@ca.idec.com
IDEC AUSTRALIA PTY. LTD.
Unit 17, 104 Ferntree Gully Road,
Oakleigh, Victoria 3166, Australia
Tel: +61-3-8523-5900, Toll Free: 1800-68-4332
Fax: +61-3-8523-5999
E-mail: sales@au.idec.com
7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan
Tel: +81-6-6398-2571, Fax: +81-6-6392-9731
E-mail: marketing@idec.co.jp
Specifications and other descriptions in this catalog are subject to change without notice.
Cat. No. EP1173-3 MARCH 2013 1 PRINTED IN SINGAPORE
IDEC ELECTRONICS LIMITED
Unit 2, Beechwood, Chineham Business Park,
Basingstoke, Hampshire RG24 8WA, UK
Tel: +44-1256-321000, Fax: +44-1256-327755
E-mail: sales@uk.idec.com
IDEC ELEKTROTECHNIK GmbH
Wendenstrasse 331, 20537 Hamburg, Germany
Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24
E-mail: service@idec.de
IDEC (SHANGHAI) CORPORATION
Room 701-702 Chong Hing Finance Center,
No. 288 Nanjing Road West, Shanghai 200003, PRC
Tel: +86-21-6135-1515
Fax: +86-21-6135-6225 / +86-21-6135-6226
E-mail: idec@cn.idec.com
IDEC (BEIJING) CORPORATION
Room 211B, Tower B, The Grand Pacific Building,
8A Guanghua Road, Chaoyang District,
Beijing 100026, PRC
Tel: +86-10-6581-6131, Fax: +86-10-6581-5119
IDEC (SHENZHEN) CORPORATION
Unit AB-3B2, Tian Xiang Building, Tian’an Cyber Park,
Fu Tian District, Shenzhen, Guang Dong 518040, PRC
Tel: +86-755-8356-2977, Fax: +86-755-8356-2944
IDEC IZUMI (H.K.) CO., LTD.
Units 11-15, Level 27, Tower 1,
Millennium City 1, 388 Kwun Tong Road,
Kwun Tong, Kowloon, Hong Kong
Tel: +852-2803-8989, Fax: +852-2565-0171
E-mail: info@hk.idec.com
IDEC TAIWAN CORPORATION
8F-1, No. 79, Hsin Tai Wu Road, Sec. 1,
Hsi-Chih District, 22101 New Taipei City, Taiwan
Tel: +886-2-2698-3929, Fax: +886-2-2698-3931
E-mail: service@tw.idec.com
IDEC IZUMI ASIA PTE. LTD.
No. 31, Tannery Lane #05-01,
HB Centre 2, Singapore 347788
Tel: +65-6746-1155, Fax: +65-6844-5995
E-mail: info@sg.idec.com
www.idec.com